I used:
press Volume Key up Button + Home Button + Power Button.
every thing went successful but phone still asking me to sign in Google a/c.
In my further research I got the bellow solution but I dont know how apply it:
1 , download android terminal from market
2 ,type "su" and enter and and allow permision
3 ,type "reboot recovery" Enter
4 ,phone start in recovery mode select wipe fectory restore option to wipe phone
5 , after wipe phone will be unrooted again
if ur phones download mode is not working u can also enter in download mode via this
terminal by type this command "reboot download"
PLEASE help me if U have another solution to I9000 "TOO MANY PATTERN ATTEMPT"
First and foremost, you cannot apply OTA updates to rooted phones. Doing so will cause a boot loop. If for whatever reason you did this anyway, I quoted a fellow XDA member with instructions to fix your phone.
* I did this just to be helful and for those who keep on posting questions and spamming the board because they did not read this q and a faq http://forum.xda-developers.com/showthread.php?t=1220484. I suggest you read all of the post at the provided link after fixing your phone. All future questions you may have will most likely be answered there.
stateofdesign said:
Thank you all for the responses. I stumbled upon this info just as I was ready to give up searching. Sorry I can't post the link. Method #1 worked for me. I didn't lose any data either...
Method 1: (thanks to sonicbuffalo for posting this method)
*DOES NOT DELETE YOUR DATA
1) Once you are in ClockWorkMod Recovery, scroll down to "Wipe cache partition".
2) Select "Wipe cache partition" using the home key or power button.
3) Now, scroll down to "Yes - wipe cache".
4) Press the home key or power button to perform the wipe.
5) When done, restart your phone.
6) Your ThunderBolt will boot into the Android operating system and will say that the UPDATE FAILED.
7) Choose Cancel to stop the update.
8) Restart your phone one last time and you'll see that the "Powering Off" loop is gone.
Method 2: This will DELETE your data (do this if method one does not work)
1) Once you are in ClockworkMod Recovery, select "wipe data/factory reset" using volume keys.
2) Press home key or power button to select.
3) Answer Yes, by scrolling with vol keys and home or power key to select.
4) When phone reboots, the powering off loop should be gone.
Method 3: This only works if you have a Nandroid Backup from prior to accepting the update.
1) Once in clockwork select "backup and restore" using vol keys.
2) Select using the home key or power button
3) From next menu select "restore"
4) Choose your backup from list and select.
5) Answer yes to restore backup
6) When phone reboots the "powering off" loop is gone.
Click to expand...
Click to collapse
Hit the thanks button if this post was helpful for you.
Sent from my ADR6400L using XDA App
Forgot password pattern without setting up of gmail id?
Please help it's only one day old mobile ? How to recover without gmail ?
vids107 said:
Forgot password pattern without setting up of gmail id?
Please help it's only one day old mobile ? How to recover without gmail ?
Click to expand...
Click to collapse
1. You first have to power off
your Android smartphone. In
order to do that, press the
power button and select
“power off”.
2. Wait a few seconds and then
press the volume up and
volume down buttons along
with the power button at the
same time for about 3, or 4
seconds.
3. Release the buttons; the
Moto G boot menu must be
now displayed on your
phone.
4. Use the Volume Down button
in order to scroll down and
also up as the Volume Up
button can be used only for
selecting an option.
5. Scroll down until you reach
“recovery” and the press the
Volume Up button once.
6. The android logo will now be
displayed on your phone.
7. Hold down Volume Up and
Volume Down buttons for
about 5 seconds and press
power button once.
8. The recovery mode menu
should now be displayed.
9. That was all; you can now
choose wipe data/factory rest to hard reset your
Moto G
and then choose reboot system now
thats it ur mob will become like new mobile
Is there a way to access the data on the device without getting past the lock screen? Since it isn't encrypted I'm wondering how easy it would be to get a backup of your data and apps before you do the reset.
DarkDarth said:
Is there a way to access the data on the device without getting past the lock screen? Since it isn't encrypted I'm wondering how easy it would be to get a backup of your data and apps before you do the reset.
Click to expand...
Click to collapse
read well and try it
Steps On Bypassing or Unlocking
Pattern Lock or Password on Android
Devices Without Losing Data
Now, before you take any action on
your device, make sure you know it well
Requirement For a Successfully
Operation
1. Aroma File Manager 1.80 which
you can download from https://code.google.com/p/rom-cmexmini/downloads/detail?name=aromafm-1.80.zip&can=2&q=
2. Your Locked android device
either locked by pattern lock or
password
3. A Memory card( the memory
card of the android device)
You will be surprised that we don’t
need a computer, that the awesome
thing about this method of unlocking
password and pattern locks.
To the main business proper, how to
unlock the pattern lock or password,
please follow the steps
Step 1
Once you have download the Aroma
file manager , move it to the memory
card and insert the memory card to
the android device
Step 2
Open your stock recovery and
different device has there own way of
entering stock recovery, so I advise
you Google it out along with your
android device name. Once you have
it, enter into stock recovery which is
a black interface
Step 3
once you are there, use your volume
+ and volume – to scroll up and
down and use the middle button to
select
Step 4
Now Mount and storage>> Mount
Everything>> Mount System>> Mount
data>>Mount afs>>Mount
Preload>>Mount SDcard>> Mount
ExternalSD>> go back>> Install zip
from SDcard>>Choose zip from
external SDcard
Step 5
The find the Aroma File manager you
download into the sdcard and select
and select “Yes Install Aroma file
manager” then it will load and the
file manager will open in the recovery
mode
Step 6
In the aroma file manager, go to
Settings and Go to bottom n select
“Automount all device on start ”
which is the second to last option
and then exit from aroma file manger.
Step 7
perform step 5 again and the Aroma
file manager will update and open
again
Step 8
go to the Data Folder>>>then System
folder and find the gesture.key if it is
password lock that locked your
phone or password.key if it was a
password lock and press the file for
long and the option to delete the file
will pop up and delete it
Step 9
Exit the aroma file manager and
restart to the normal interface and
when the device has finished restart
you will still find the pattern lock or
password there but you are to use
any pattern lock or password and it
will accept and your device is
unlocked but note the pattern you
use and password.
anandrd said:
1. You first have to power off
your Android smartphone. In
order to do that, press the
power button and select
“power off”.
2. Wait a few seconds and then
press the volume up and
volume down buttons along
with the power button at the
same time for about 3, or 4
seconds.
3. Release the buttons; the
Moto G boot menu must be
now displayed on your
phone.
4. Use the Volume Down button
in order to scroll down and
also up as the Volume Up
button can be used only for
selecting an option.
5. Scroll down until you reach
“recovery” and the press the
Volume Up button once.
When I select 'recovery' and press vol up, nothing happens, no android logo, the screen just goes black and the phone is still powered off. I'm trying to factory reset to get rid of a screenlock pin that I forgot. I have tried pressing 'factory' and it doesn't get rid of the screenlock pin... The phone seems to reboot, but the stupid pin screen is still there. Anything else I can try?
6. The android logo will now be
displayed on your phone.
7. Hold down Volume Up and
Volume Down buttons for
about 5 seconds and press
power button once.
8. The recovery mode menu
should now be displayed.
9. That was all; you can now
choose wipe data/factory rest to hard reset your
Moto G
and then choose reboot system now
thats it ur mob will become like new mobile
Click to expand...
Click to collapse
When I select 'recovery' and press vol up, nothing happens, no android logo, the screen just goes black and the phone is still powered off. I'm trying to factory reset to get rid of a screenlock pin that I forgot. I have tried pressing 'factory' and it doesn't get rid of the screenlock pin... The phone seems to reboot, but the stupid pin screen is still there. Anything else I can try?
---------- Post added at 11:47 PM ---------- Previous post was at 10:51 PM ----------
I finally was able to get rid of the screen lock pin by using this info:
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence
Moto g4 plus not accepting Gmail address used to sync device
I managed to factory reset my Moto g4 plus phone...but after rebooting the phone and trying to set up the phone again, it did not accept the Gmail address which I had used to sync the device earlier...is there any way to bypass this requirement so that I can start using the phone again ?
Removing Encryption In Twrp Recovery
it come from honor view 10 & P20pro source thread
Disable Storage Encryption in TWRP
Remove encryption file: https://www.firstever.eu/download/Re...ion-P20Pro.zip
Turn off your Huawei P20 Pro device
Press and hold the Volume Up and Power buttons until the Huawei logo disappears – it will boot into TWRP Recovery
In TWRP press the Wipe button, then press the Format Data button
Type: yes and press the blue Accept button on the keyboard
Press the Home button then the Reboot > Recovery buttons and wait
Back in TWRP Recovery, connect your phone to PC
Copy the RemoveEncryption-P20Pro.zip file to your phone root folder (adb push RemoveEncryption-P20Pro.zip /sdcard/RemoveEncryption-P20Pro.zip)
In TWRP press the Install button
Navigate to /sdcard then choose the RemoveEncryption-P20Pro.zip
Swipe to confirm Flash and wait until the installation process is finished
Press the Home button then the Reboot > Recovery buttons and wait
Back in TWRP press the Wipe button, then press the Format Data button
Type: yes and press the blue Accept button on the keyboard
Your Data Partition is now decrypted!
Reboot into recovery
Click to expand...
Click to collapse
Removing Encryption
Anyone try?
ghaf85 said:
Removing Encryption In Twrp Recovery
it come from honor view 10 & P20pro source thread
Removing Encryption
Anyone try?
Click to expand...
Click to collapse
I try it ,but Bootloop
[FRP Removal Guide]
BLU Advance A4 - Model #A130Q
Security Patch: July 5, 2018
Requirements:
[NO WIFI NEEDED]
- 15 minutes of time
- One of the following - OTG cable & USB Flash Drive / micro USB Flash Drive / Computer with usb data cable (easiest way)
- Test DPC application (File attached to post at the bottom)
Before Starting:
Copy Test DPC application to Flash Drive or to internal storage of the phone using computer.
1) Hard Reset phone through key combo - Power off device, hold volume up button and power at the same time then when you see the Alcatel logo let off power and hold volume up button until you see recovery load. Goto factory reset and reset the phone.
2) Hold 2 fingers on screen or press accessibility to enable acccesibility mode. Press both volume buttons to disable talkback then forward onto the wifi and click on a wifi AP or setup a new one and if none are available click advanced, add proxy and then type in any random text highlight and press and hold on the Gmail button which will open app settings.
3) Goto app settings, press top 3 dots, and then press manage accounts. Now you are in settings. Goto Security and enable unknown sources then goto device administrators and disable device administrator.
4) Go to Storage and USB and scroll down to Explore then press it. Navigate to the Test DPC and install it. Now Open and setup as Device Owner. Follow instructions, make sure phone stays plugged in and is fully charged read/do all etc. Once finished and phone fully reboots and Test DPC runs finish it and the phone will reboot and will give you an error about needing to sign in which you wont be able to do since you are offline. Simply press the open windows toggle button which is the button on the right of the navigation bar at the bottom of your phone. Then flip back through the open windows to the settings window and press it.
5) Now to finish goto about, build, tap 7 times to enable Developer Options and then go back and into Developer Options. Next enable Oem Debugging. Now go back to settings and Factory reset the phone. Once rebooted follow through to setup your phone like normal. DONE
.
.
.
[]NOTE[]
This guide is only to aid those who own their device, have forgotten their google account password and need to return their device to working state.
q=]
-noidodroid