Related
OK, no matter what method I try I am unable to achieve a successful flash of my phone. I have tried it via odin with many different firmware versions but all seem to fail almost immediately. The only way to resolve this is to use samsung switch and reset phone to stock. The problem is stock firmware is german vodafone full of vodafone bloatware, I want to get rid of it and flash a UK unbranded firmware but no matter what I do I am unable to achieve this. I can see from the forum that there are many people out there with the same flashing problem but with no real responses on how to achieve the goal. There must be people out there that have achieved this task but don't seem to be offering up much help?
ok
sinbrad said:
OK, no matter what method I try I am unable to achieve a successful flash of my phone. I have tried it via odin with many different firmware versions but all seem to fail almost immediately. The only way to resolve this is to use samsung switch and reset phone to stock. The problem is stock firmware is german vodafone full of vodafone bloatware, I want to get rid of it and flash a UK unbranded firmware but no matter what I do I am unable to achieve this. I can see from the forum that there are many people out there with the same flashing problem but with no real responses on how to achieve the goal. There must be people out there that have achieved this task but don't seem to be offering up much help?
Click to expand...
Click to collapse
Is your phone international unlocked out of the box? I dont believe it was, because as far as I've read international unlocked phones come with "unbranded" firmware. The unlocked ones I know can be pretty much flashed with "any" international firmware, which is what you are trying to do.
If you dont know for sure. Odin the stock German Vodaphone. Let the phone boot. Boot back to stock recovery, then factory reset and clear cache.
Then let the phone boot...Download phone info app by vndnguyen (free version is fine)...Open the app, go to CSC Code tab. Then that will tell you the active CSC code and your firmware CSC code...you are looking for the line that says Available CSC Codes. If it only lists German Vodaphone (VD2), then I believe you are stuck til the phone is unlocked.
Anyone, jump in here if I'm mistaken. I am using this as reference as, I've checked my G920F. Mine is unlocked tho and I can flash any firmware from any region with no problem. Hopefully I've answered your question.
I had no luck with the firmwares on the firmware page either.
If you are on OI9 check http://forum.xda-developers.com/galaxy-s6/general/guide-android-6-0-marshmallow-beta-how-t3277533
And try flashing the first stock firmware https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list (not the android M one!) via ODIN.
Basic process is:
Download the above file, extract, there should be 4 files inside (AP,BL,CP,CSC), simply select each one to go in the relevant box on ODIN, then go into download mode on your phone and click start...
N.B. Be aware that the above firmware contains a PIT file which will reformat and resize the partitions on your phone, so make sure you have a copy of the stock firmware that works before trying the flash (i.e. the one which Smart Switch downloads). You can grab it from your windows %TEMP% directory during the smart switch download (it first downloads a file to TMPxxx, then extracts it into a directory of the same name, its these files you want. They should be the four files beginning with the type of ODIN file you are flashing (AP,BL,CP,CSC). The files get deleted after the firmware has flashed so make sure you watch the process. If things go wrong you can re-flash these files via ODIN
As far as I was led to believe and when I purchased the phone it did state factory unlocked. I was able to put in any sim when I received it and didn't have to go through any aftermarket unlock process?
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
abdussamad said:
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
Click to expand...
Click to collapse
So, seems this is not uncommon?
ok the way to do it is download this file
https://drive.google.com/folderview...sharing&tid=0B40ItdHKfkyQd1hJQXVDU3dDU2c#list
its BTU firmware of 5.1.1
and flash this firmware you'll have 4 files AP,BL,CP,CSC,put it in the respective boxes in odin.I have tested this right now and it works
Press "thanks" if i have helped
Well downloaded the app for CSC info and it states available CSC codes are...
ATL, AVF, CNX, CYV, MOB, MTL, OMN, SIM, SWC, TCL, VD2, VDC, VDF, VDH, VDI, VGR, VIP & VOD
Any ideas?
Ok, tried to get stock firmware when samsung smart switch was downloading and installing but couldn't see where the firmware was being downloaded to? Tried windows temp etc but nothing appeared during download and install?
sinbrad said:
Ok, tried to get stock firmware when samsung smart switch was downloading and installing but couldn't see where the firmware was being downloaded to? Tried windows temp etc but nothing appeared during download and install?
Click to expand...
Click to collapse
Just type in %TEMP% into you windows explorer address bar and it will take you there. arrange by date modified and you will see the size ticking up during the download, before the flash starts it will extract into a folder with the same name, the md5 files can be grabbed from there
No probs here
abdussamad said:
I have the same problem i have a unlocked G-920F with egyptian CSC and firmware 5.1.1 .when i try to flash BTU 5.1.1 via odin, i have the same problem and only way to recover is via smart switch.BTU firmware is from sammobile
Click to expand...
Click to collapse
I flashed BTU firmware on my 920F international unlocked that came with UAE firmware without any problems. Idk
sd_N said:
I flashed BTU firmware on my 920F international unlocked that came with UAE firmware without any problems. Idk
Click to expand...
Click to collapse
Which file and which method?
aaronjp said:
Just type in %TEMP% into you windows explorer address bar and it will take you there. arrange by date modified and you will see the size ticking up during the download, before the flash starts it will extract into a folder with the same name, the md5 files can be grabbed from there
Click to expand...
Click to collapse
Ok, Got it this time, all four files. Will give the method above a go and if it fails at least I've got the stock firmware to fall back on?
Magic, have had great success. Now on the BTU firmware and everything is up and running. Got the stock as well just in case but if this continues to work won't be reinstalling stock. So a big thanks to those who helped
sinbrad said:
Magic, have had great success. Now on the BTU firmware and everything is up and running. Got the stock as well just in case but if this continues to work won't be reinstalling stock. So a big thanks to those who helped
Click to expand...
Click to collapse
Glad you are sorted
I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
kamranali44 said:
I have got an unlocked Galaxy S7 (G930F) and have flashed the android nougat update (BTU - UK - 7.0). It is working fine.
Since I have updated to nougat, there are some updates released (bug fixes, I can confirm this on sammobile site) but are not available when I check for the updates in settings.
Any idea on what this issue might be.
Click to expand...
Click to collapse
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
No updates on Smart switch
userName'dYa said:
If you have either root or custom recovery you can't receive OTAs but you can update using SmartSwitch on your PC
Click to expand...
Click to collapse
I do not have root or custom recovery. I have downloaded the firmware from sammobile and checked that the knox warranty is not tripped over and the device status is still official.
MAX 404 said:
hi mate
Updates ( if you are not rooted) are CSC carrier dependent , if your carrier or CSC do not issue any updates ...you will not have them.
When you checked in sammobile you checked if your carrier / CSC had updates?
Click to expand...
Click to collapse
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Do you get any error?
userName'dYa said:
Do you get any error?
Click to expand...
Click to collapse
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
kamranali44 said:
No, it says "the latest updates have already been installed "
I even had this issue on Android 6 so I downloaded the Android 7 and flashed it via odin. Now there are updates but I would like to get the OTA to update it.
Click to expand...
Click to collapse
Are these bug fixes for the country AND the carrier you are using
userName'dYa said:
Are these bug fixes for the country AND the carrier you are using
Click to expand...
Click to collapse
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
kamranali44 said:
Yes the bug fixes are for this country (UK).
I am not sure if they are carrier dependent as it is an unlocked software (I am on O2 and there is a different firmware for O2 locked devices).
Are they still carrier dependent is the phone is unlocked?
Click to expand...
Click to collapse
Yes the carrier matters even for unlocked phones
userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
Okay, in this case I think I will have to wait for O2 to approve them.
I thought the idea of having an unlocked phone from samsung is to use any sim and get updates directly from Samsung when they release it.
kamranali44 said:
The BTU firmwares in the UK are not network dependent as far as I know and they come installed in unlocked devices with no network bloatware.
I do remember flashing the CSC (G930FOXA1DPLT - that's the current one) which came with the BTU firmware. The new CSC has updates (G930FOXA1DQB1).
Am I missing something or is the device still dependent on a network to approve this.
Click to expand...
Click to collapse
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
I was wondering the same and SergioA is right. I still have the DBT CSC although I was flashing the BTU Firmware. Thanks for clarification
userName'dYa said:
Yes the carrier matters even for unlocked phones
Click to expand...
Click to collapse
So my S7(Sprint) running on G930U firmware will go back to Sprint Nougat firmware full of bloatware?
MAX 404 said:
Hi
You get updates either by the carrier or by the CSC , in your case you have an unbranded firmware , BTU, so no carrier updates...you will get an update only when an update for BTU unbranded firmware is release it , independently if there are other firmwares newer than yours around....only way to keep updated to the latests is flashing it yourself any new release , check this thread if you deciede to go that way
Click to expand...
Click to collapse
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
SergioA said:
Try to get your CSC code by installing Phone Info from the market : I too have flashed the first official Nougat BTU UK 7.0 firmware with Odin, with a complete reset of the phone, but in my case I still have CSC = ITV and not BTU.
This seems to prevent us from getting the new OTA update : somewhere I've read that after the Odin procedure I should have entered recovery and factory reset the phone from there to get the CSV changed to BTU as the installed firmware is a "multi-csc" variant.
We still can download today's new firmware from SamMobile and use home_csc to avoid resetting again the phone.
Hope someone more expert than me can confirm/correct my statements
Inviato dal mio SM-G930F utilizzando Tapatalk
Click to expand...
Click to collapse
My S7 DUOS FD and my wife's S7 F both recieved the Nougat OTA update DQB1 today, mine was originally CSC XSG (UAE) and mi wife's was CSC TTT (Trinidad And Tobago), and both were updated to CSC BTU Nougat Final release, changing the CSC to BTU (this will wipe out your memory in the process but for a newer OS version it is recommended). I had doubts about getting any OTA updates since my S7 is the FD version which does not exists as a BTU phone originally, but in the end I got the update.
Long story short, if you want to recieve OTA updates after sideloading firmware with ODIN with a different CSC, you should fully convert to that new CSC, otherwise you won't get the OTA's.
kamranali44 said:
The BTU has a firmware update available on sammobile but not it's not OTA update on my phone.
What if I download the new update and flash it via odin with HOME_CSC file added. Will it start the updates by carrrier?
Click to expand...
Click to collapse
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
If your using the btu version for UK phones, then how did you manage not to brick your phone? The UK phones do not have snapdragon, they have the Samsung chips.
MAX 404 said:
Hi
if you have a DPLT firmware you should get it soon.....unless your system by some reason is not set as original ( even if knox is tripped but your system is set as original you will get it) anyhow is faster if you download it yourself and flash it , use home_csc so you will not factory reset your phone , NOTE: has to be the same home_csc that you have in your phone right now , not any home_csc for example:
Lets say you want to flash the latest firmware and it happens to be from France and you do not want to loose any of your apps , config or data
1 find out what CSC is installed in your phone ( phoneinfo app is great for that) in your case BTU
2 download the latest possible firmware for your CSC and extract from it the home_csc file , save it , discard the rest
3 download the latest firmware available , in our example France , extract from it download the MAIN-file and extract AP BL & CP save it , discard the other 2 files ( home_csc and CSC from France firmware
4 now take AP BL & CP from the latest firmware ( in our example France) and take the home_csc from a BTU firmware ( why , because is the CSC installed in your phone) and flash the together
In that way you can always have the latest in your phone without waiting for it , phone will not be knox tripped , will be 100%official as is all official firmware
Click to expand...
Click to collapse
Thank you, you are a hero :good:. I did update via odin and installed it without losing any data.
As I have said I have previously (about a week ago) used the CSC file rather than HOME_CSC.
I have the Phone Info app, The Orignal CSC code is blank(is it normal?), Does this look normal as I have not checked the CSC before updating to android nougat. I have added a screenshot of it.
Since there is no official Nougat release in the USA yet, I was planning on installing the "BTU" Nougat official firmware intended for the UK. Do I need to do anything with changing the CSC to use in the USA, or just flash everything as-is in the firmware download? I don't understand if the CSC change is REQUIRED to match the country you are using the phone in, or just recommended. The current Marshmallow build is showing a CSC of OJV (middle east)
What are you USA folks out there doing? I am on Straight Talk (AT&T sim).
My current phone is giving me a lot of problems, and I'd really appreciate a response as I need to get switched over to this S7 ASAP. I realize I can just use Marshmallow but am really hoping to get to Nougat so I don't have to reflash and potentially lose data down the road.
Thank you!
If the CSC you want to change to is not included in the CSC already on your phone, you'll need to use CSC of the new ROM (Not HOME_CSC) along with the other 3 sections, and check the "Repartition" option in PIT settings of ODIN
This will wipe your phone back to factory settings
Are you rooted?
*Detection* said:
If the CSC you want to change to is not included in the CSC already on your phone, you'll need to use CSC of the new ROM (Not HOME_CSC) along with the other 3 sections, and check the "Repartition" option in PIT settings of ODIN
Click to expand...
Click to collapse
He doesn't need to check repartition. Despite the fact that it is designed for downgrading and unbricking (exclusively, in most cases ), it is not required to do that if only CSC change is needed. Only thing he need to do is using CSC section of the ROM (not Home_CSC because it is preserving old settings in the phone, message to The Founder of the topic ).
Generally, when I was switching to BTU I flashed Firmware with CSC different that BTU (for example Sweden rom) and then flashed BTU sofware. CSC has changed flawlessly
And when you have rooted phone, you can change CSC manually. That extremely ease you effort.
i would just flash the firmware and the csc that comes with it because then you will get updates in the future. if the csc doesn't match the firmware you wont ever get updates so just do a samsung cloud backup and flash the nougat But its weird that someone in the usa doesn'ty have nougat because i thought usa was 1 of the first with nougat.
RiTCHiE007 is right. If you want to receive OTA updates, CSC must match with the type of firmware it comes from. That is why you need to change CSC from US to BTU. Here is a thread that will help you out providing explanation of the topic.
Hey peeps. Sammobile uploaded the first few 8.0 roms. Germany, France and few others. I have the SM-G955F bought from Greece, only used with a greek sim. Can I flash for example German or Nordic rom? Will I have problems with future updates or Knox?
No, you can't flash it. Due to samsung who had added a new compression which does not work with Odin. So Odin needs to be updated, or you have to use a workaround
You can flash with Odin work around, here:
https://forum.xda-developers.com/galaxy-s8/how-to/discussion-oreo-final-t3746561
That process, for the One Plus 3, may give you some ideas how to do.
There's a workaround for flashing the new Odin files here: https://forum.xda-developers.com/galaxy-s8+/how-to/guide-how-to-flash-crap-using-odin-t3748555
Hello people, I hope you're okay!
I bought an used S21+ but it was not clear that the model I would receive is Korean (G996N). While I don't have any issues, it also misses the eSIM option (and probably Samsung Pay is not going to work in Europe). The eSIM option would be really good to have (SPay I do not care a lot).
I've been searching for an answer in regards to change the region and the responses are mixed and I am out of Samsung phones and firmware loop for a few years. Some say I can just change the CSC region using SamFW and that's good to go. Some say it will not work because my KOO CSC does not allow this change. Also, OTA firmwares are lost until I switch the CSC back (but, from what I understood, if I also change the firmware it would receive OTA normally).
Question: is it possible, nowadays, to just change Firmware and CSC to another region? My phone has an Exynos processor so it would have to be a firmware from Europe or Latin America.
I also understood it will not brick nor trip knox efuse, right?
Thanks a lot!
@angourakis Ok let me give you a clear response about CSCs. ALL Samsung firmware will let you flash a new CSC (as long as you use Odin). This has worked for me every single time.
You need to update your Android to the latest 13 and download and extract this (remember to use “direct download”, this website is the only one with a good selection of firmware) and use Odin (get 3.14.1 non patched) to flash the HOMECSC file (in the CSC slot).
Hey @traman124 thanks for the response!
Why this firmware in specific? I am running a more recent firmware than the one you mentioned. Also, do I need to have the bootloader unlocked?
Thanks!
It doesn’t need to be that version @angourakis it can be any version… that one will work though And you can use Odin with a locked bootloader (with download mode).
@traman124 thanks again!
Unfortunately, I tripped knox while trying to install a CSC from G996B version (kept BL, AP and CP from G996N and only used CSC from B version).
Now I am trying to look for a trade in program to replace the phone.
Thanks anyway, I really appreciate your help!
@angourakis I’m sorry….. this has never happened to me while flashing CSCs but the few times I have I did it with the same variant phone/tablet…..