Hi! I need help with my Galaxy Tab 2 10.1. It was working fine until I decided to reset it to factory settings via the recovery mode. I did the wipe data/factory reset and wipe cache partition. When I click the "Reboot system now", it just turns off then when I turn it back on it'll go back to the recovery settings. I flashed the stock ROM using Odin but I was having the same problem. It never go pass the recovery mode. I also installed Philz touch (throuhg Odin) and flashed a custom ROM but, alas, it's still stuck on the recovery mode.
The curious thing is, right after I flash a ROM, the device will show that it's updating the system and then it'll turn off. It won't reboot unless I turn it on. Whenever I hit the "Reboot system now", it'll just shut down. I have charged it fully 100% so I'm not sure what's wrong. I thought the keys were stuck but all the keys are responsive (power, volume up and down) when I checked them.
I also tried the apply update from ADB sideload (I found a different thread somewhere and I was able to do every step) but it's the same. I'm stuck in the recovery mode
I really hope that someone will be able to help me.
Thank you guys!!!
I have found the solution to this problem.
Here is the link:
https://forum.xda-developers.com/galaxy-tab-2/help/gt-p5100-boot-recovery-download-mode-t3246322
Related
I rooted my Charge using the Odin3 method, and then tried to install a custom rom using ROM manager. However after installing the new rom and rebooting the phone I was stuck on the Samsung screen for a good half hour. Now I've tried to reset the phone to factory defaults using the volume down key and power button method but when i do that instead of going to the menu showing, fastbook recovery, clear storage menu, etc. I get a screen that just says "Downloading Do not turn off target!!!" how do I get out of this screen? Also the 3 button CWM recovery boot did not work for me either, though the method of rooting i used was supposed to install CWM
Hey,
I've recently had a friend of mine give me his phone to look at.
It's a Samsung I5801
I tried installing numerous ROM's onto this such as stock froyo and kyrillos 9.
Whenever i install through Odin i get to the stage where the data needs to be wiped through clockwork. Pretty straight forward, however when the phone is rebooted after this Odin does not detect the phone and will boot into recovery again.
Any ideas? I'm not much of a samsung kinda guy woking with htc all my life lol.
Solved.
Flashing a stock ROM, with bootloader in tact did the job. Had to say was sweating a bit as many were saying it could hard brick phone... Used European JPA.
Flash through ODIN i pray to god no one else has this problem
Wipe using Recovery
Just go in recovery mode and Wipe Cache and Dalvik-Cache.
Problem solved........
I have hard bricked my galaxy 3
I installed ClockworkMod recovery and selected to install ROM from SD card
my phone restarted and booted in samsung,s recovery mode
I selected wipe data and nothing happened for next in 2-3 mins,
So I removed battery and rebooted phone which again booted in samsung,s recovery mode for number of trials.
Then I renamed Rom Filr name to update.zip and moved it to root of SD
and rebooted in recovery and selected option Install update.zip which after some time started executing.
Phone rebooted and now it doesn't show anything else than samsung boot logo.
please help me out.
UPDATE:
Download mode and Upload mode are working but Boot menu is not working.
>>[email protected]<< said:
UPDATE:
Download mode and Upload mode are working but Boot menu is not working.
Click to expand...
Click to collapse
Just give it a try via ODIN since download mode is working
This link might help you ,
he has clearly explained the Odin process to
flash Roms and several do's and dont's
http://forum.xda-developers.com/showthread.php?t=1372414
Tried to change roms and somewhere in the process it got to the Samungs logo and wouldn't continue. I've tried changing recoveries and roms with the same results. I even tried CynagenMod rom and it just changes the logos of the boot screen. I can get into recovery and into download mode. Anyone have any ideas? I'm running out.
Please help!
I have this same problem
I have the N8013 version.
Installed a rom then tried to revert back to previous rom. and got stuck on the SAMSUNG logo. Can get into Download mode, and Recovery Mode.,,but nothing helps. I have tried several methods:
1. ODIN- CWM and TWRP recoveries, and a number of stock and custom roms floating around the troubleshoot forum...got" PASS" on the ODin after attempting to install stock tar images but tablet still gets stuck at SAMSUNG
2. Sideloads of zip files..I get 2 different errors that after doing research seem common on the websites. I suggested to use touchwin recovery instead of CWM, CWM gave another error. .Long story short sideloading is not working either.
Any thoughts, suggestions...help please!
KL
wipe data and cache
wipe cache partition
wipe dalvik cache
and reboot the rom will boot up
THERE IS A THANKS BUTTON ON THE LEFT
Tried that numerous times.
Sent from my VS980 4G using xda app-developers app
Jaspreet.master7 said:
wipe data and cache
wipe cache partition
wipe dalvik cache
and reboot the rom will boot up
THERE IS A THANKS BUTTON ON THE LEFT
Click to expand...
Click to collapse
Thanks for the reply....
I tried what you suggested:
wiped data/factory reset
wiped cache
wiped dalvik cache
Then installed the following tar file: N8013RootInjectedSystem from http://forum.xda-developers.com/showthread.php?t=1831152&page=4
Got stuck on the Samsung screen.
From my experience you wipe before installing the rom.. Correct?
Jaspreet.master7 said:
wipe data and cache
wipe cache partition
wipe dalvik cache
and reboot the rom will boot up
THERE IS A THANKS BUTTON ON THE LEFT
Click to expand...
Click to collapse
I installed: CF-Auto-Root-p4notewifi-p4notewifiue-gtn8013.tar.md5 via Odin, the process passed, and tablet booted into stock recovery.
Did a factory reset from stock recovery and attempted to reboot, but still got stuck at the Samsung logo.
Any suggestions of how to proceed from here?
Any help or suggestions would be appreciated. I do have 2 backups but they are on my external microsd,and will not load in stock recovery...not even able to access my micro sd from custom recoveries.
Any help or suggestions would be greatly appreciated.
TIA
KL
Fixed following these instructions: http://forum.xda-developers.com/showthread.php?t=2108145
The noteable suggestion seemed to be to format everything except external memory...
the only problem is now i am unable to view microsd....but i am happy happy happy
let me know if this works
HOW TO FIX A STUCK BOOT SCREEN ON GALAXY NOTE 10.1 N8013 4.1.2
1.) Download ODIN (just google it)
2.) FLASH ClockworkMOD (CWM) using ODIN to Device (just google it)
A.) Before pressing "START" Uncheck all options ( Auto-reboot, F-reset (re-partition should already be unchecked etc) Just hold the power button device to reset, it will reset on it's own upon start up
4.) Download Firmware Hotfile Linked By the Beautiful Samir who commented on this thread (just search for him). Make sure that fireware is designated for your particular device. No Samsung SIII firmware for Samsung Galaxy Note 10.1.
A.) Use the "Save to" Option not the "Open With" option...It's just better
5.) Enter Recovery Mode (CWM Mode) on device using the Power + Volume UP key
6.) Factory Reset Wipe
7.) Wipe Cache
8.) Advance Settings - Clear Davlink Cache & Fix Permissions
9.) Mounts & Storage - Format all except your external SD card (be careful and watch what your doing don;t want to delete anything else by mistake..cause you will be really..cough..upset)
A.) be forewarned that after these wipes you won't be able to get past the first Samsung logo screen, it will just remain there on the screen but have no fear it should be fixed when you download the Firmware. KAY. breathe easy.
B.) i mention this because my problem was that i was getting past the first Samsung logo but not past the second one, in the sense that it wasn't even appearing on the screen.
10.) Make sure that your USB drivers for Samsung are working, you can get the driver from Samsung site (Google it) or use KIES (Google it)
A.) if you use KIES i advise you to download it, get the Samsung USB drivers from it, then go to control panel on your desktop and Uninstall it, you can download it again later when your Note is working again but it seems to cause problems with ODIN, better safe than sorry i always say
11.) The Firmware can be a particularly long download, but once it is done and you have extracted it to a folder using WINRAR (remember the name of this folder) make sure that it is saved to your computer then shutdown and restart your computer
12.) Now with your newly restarted computer.........
1.) Open ODIN
2.) Put Samsung Note 10.1 into "Download Mode"
3.) Connect your Note to Computer using USB, it should make the ID:COM turn yellow
4.) Uncheck auto-reboot, F-reset etc
5.) go to PDA and look for the folder that you placed your firmware in :KIES_Blaahblaahblahh_blaah
6.) Press START
7.) you should see a download begin both on device and within ODIN....PASSSSSS (Green Box)
8.) Reset Computer Manually by pressing the power button
9.) turn back on Galaxy Note 10.1 and you should be all set
a.) don't be scared after you turn on your note and you get the Samsung logo and then the little android robot downloading some stuff (that is supposed to happen)
I'm in a serious trouble please please help
So I had cm 11 on my s3 first then I decided to go back to stock and installed 4.3 official s3 firmware using Odin.
Then my phone restarted and was stuck at the Samsung logo
I checked for a solution online and found that I should wipe cache and data and here is where the problem is
When I hold down volume up or down with home and power button it only opens download mode and I cannot wipe cache and am terribly stuck....
PLEASE HELP! Thanks in advance
I'm stuck
droid.akshay said:
I'm in a serious trouble please please help
So I had cm 11 on my s3 first then I decided to go back to stock and installed 4.3 official s3 firmware using Odin.
Then my phone restarted and was stuck at the Samsung logo
I checked for a solution online and found that I should wipe cache and data and here is where the problem is
When I hold down volume up or down with home and power button it only opens download mode and I cannot wipe cache and am terribly stuck....
PLEASE HELP! Thanks in advance
I'm stuck
Click to expand...
Click to collapse
The 3 button combination in order to start the phone in Recovery Mode (where wipe options are) should be volume UP + home + power.
Avoid the volume DOWN combination because that is for Download Mode.
Try start in Recovery Mode several times because sometimes the proper combination timing is not detected.
If really the phone can't start in Recovery Mode, you should flash the official firmware again via Odin, following the procedure with caution. An important, sometimes overrated action related to flashing via PC is that any antivirus (firewall mainly) must be turned off before the flashing procedure, in order to avoid (invisible) conflicts when transfering data through USB ports.
jorgeabe99 said:
The 3 button combination in order to start the phone in Recovery Mode (where wipe options are) should be volume UP + home + power.
Avoid the volume DOWN combination because that is for Download Mode.
Try start in Recovery Mode several times because sometimes the proper combination timing is not detected.
If really the phone can't start in Recovery Mode, you should flash the official firmware again via Odin, following the procedure with caution. An important, sometimes overrated action related to flashing via PC is that any antivirus (firewall mainly) must be turned off before the flashing procedure, in order to avoid (invisible) conflicts when transfering data through USB ports.
Click to expand...
Click to collapse
I cannot boot into recovery still with volume up the phone is still just restarting. Is there a way to flash the recovery again and I have already flashed a original firmware so should I flash that again.
Could you please show me how to wipe data and cache without starting the phone or help me with the recovery
andrectsfi
Please help someone!
droid.akshay said:
I cannot boot into recovery still with volume up the phone is still just restarting. Is there a way to flash the recovery again and I have already flashed a original firmware so should I flash that again.
Could you please show me how to wipe data and cache without starting the phone or help me with the recovery
Click to expand...
Click to collapse
First of all the boot up loop is caused because you have not wiped the cache and dalvik cache (may be).
Since the recovery is not booting means, there is some error with flashing.
What you can do right now is to flash the Original Stock Rom using Odin, the original stock OS itself contains the recovery partition.
Hello everyone, I installed CWM through the Odin and everything went right, but when I try to get into recovery mode it doesn't show up the CWM recovery, just the Native Recovery. So then I repeated the process again, but this time I prevented the device to reboot, instead I hung up and tried to get into recovery mode normally by pressing volume up+home+power buttons and it worked, then I went to the option reboot system and then I disabled the flash recovery and rebooted the system. However, the Native Recovery keeps showing up, I don't know what else to do in order to disable it. Can anyone help me?
genyson said:
Hello everyone, I installed CWM through the Odin and everything went right, but when I try to get into recovery mode it doesn't show up the CWM recovery, just the Native Recovery. So then I repeated the process again, but this time I prevented the device to reboot, instead I hung up and tried to get into recovery mode normally by pressing volume up+home+power buttons and it worked, then I went to the option reboot system and then I disabled the flash recovery and rebooted the system. However, the Native Recovery keeps showing up, I don't know what else to do in order to disable it. Can anyone help me?
Click to expand...
Click to collapse
It's better to use TWRP
Sent from my GT-S7580 using Tapatalk