Database Info

My mate 7 is bricked! PLease HELP!!

Hello! Unfortunately my mate 7 is bricked! The only thing i can do is to get in bootload mode. I can't get into recovery mode. I also cant install a rom by pressing volume up + volume down + power. Nothing is happening. Only rebooting with the huawei logo.
I try this solutions :
http://www.needrom.com/download/mt7-l09-unbrick-firmware/ and this
http://forum.frandroid.com/topic/215484-unbrick-mate-7-mt7-l09/
but this no success. PLease help me. :crying:

more info. what were you doing that caused the bl? what are you currently running? do you wish to repair or clean install?

droidbot1337 said:
more info. what were you doing that caused the bl? what are you currently running? do you wish to repair or clean install?
Click to expand...
Click to collapse
I do this by trying install the new B511 firmware. I download the update.zip file and I unzip it and try to install the UPDATE.APP I found into the zip file. After that the phone always show the Huawei logo and I can't closed it. The only think I can do is to put it into bootloader mode. I try to boot through fastboot from my pc the SYSTEM.img and RECOVERY.img using a official firmware and the HuaweiUpdateExtractor, but without success. And the 3 button way (Volume up + Volume down + power) not working anymore. And also I can't get in recovery mode. I try with official recovery and with twrp recovey

gthebest said:
hello! Unfortunately my mate 7 is bricked! The only thing i can do is to get in bootload mode. I can't get into recovery mode. I also cant install a rom by pressing volume up + volume down + power. Nothing is happening. Only rebooting with the huawei logo.
I try this solutions :
http://www.needrom.com/download/mt7-l09-unbrick-firmware/ and this
http://forum.frandroid.com/topic/215484-unbrick-mate-7-mt7-l09/
but this no success. Please help me. :crying:
Click to expand...
Click to collapse
which rom firmware version you were in when you try to install 511

mpt123 said:
which rom firmware version you were in when you try to install 511
Click to expand...
Click to collapse
Β326

gthebest said:
Β326
Click to expand...
Click to collapse
i dunno how to flash MM but i think i can help you back to LP. make sure you have stock recovery for LP. if you dont just download mobopx's tool. im currently using B328, so just extract the archive and place the dload folder in either your root or an sdcard. turn off phone, hold volume up & power. hope this helps. btw, installing MM requires more steps including an update to the stock recovery.

If you have already unlock your bootloader you can try 'one-key recovery' method with HiSuite version 4.0 (download it from the official chinese website) this method will restore and flash your ROM and your phone will be OK

smich_ayane said:
If you have already unlock your bootloader you can try 'one-key recovery' method with HiSuite version 4.0 (download it from the official chinese website) this method will restore and flash your ROM and your phone will be OK
Click to expand...
Click to collapse
Please can you send me a link to download it? I make a search at google "HiSuite version 4.0" but I can't find anything

droidbot1337 said:
i dunno how to flash MM but i think i can help you back to LP. make sure you have stock recovery for LP. if you dont just download mobopx's tool. im currently using B328, so just extract the archive and place the dload folder in either your root or an sdcard. turn off phone, hold volume up & power. hope this helps. btw, installing MM requires more steps including an update to the stock recovery.
Click to expand...
Click to collapse
This link don't working

gthebest said:
I do this by trying install the new B511 firmware. I download the update.zip file and I unzip it and try to install the UPDATE.APP I found into the zip file. After that the phone always show the Huawei logo and I can't closed it. The only think I can do is to put it into bootloader mode. I try to boot through fastboot from my pc the SYSTEM.img and RECOVERY.img using a official firmware and the HuaweiUpdateExtractor, but without success. And the 3 button way (Volume up + Volume down + power) not working anymore. And also I can't get in recovery mode. I try with official recovery and with twrp recovey
Click to expand...
Click to collapse
Hi i'm getting the same problem, i tried to update to mm but now i can only access the recovery with vol up and power occasionally. the vol up and down and power doesn't seem to be working for me. as this is my daily driver id appreciate some assistance thanks

gthebest said:
This link don't working
Click to expand...
Click to collapse
sorry about that. here's the link.
mega:///#!llQWQD6S!a0JOjS1ZmCT1aSggvCPYb7lhkPimYtVhja-Mv0qk7DY

Hisuite 4.0 here's hisuite 4.0 hope this will help you

gthebest said:
This link don't working
Click to expand...
Click to collapse
http://download-c.huawei.com/download/downloadCenter?downloadId=69004&version=239974&siteCode=cn

droidbot1337 said:
sorry about that. here's the link.
mega:///#!llQWQD6S!a0JOjS1ZmCT1aSggvCPYb7lhkPimYtVhja-Mv0qk7DY
Click to expand...
Click to collapse
I did the same mistake. I have Access to recovery mode, install mode and so on but everytime I try to install another Rom it stucks at 5% and I get a failure message.
and how can I open your mega link ?

hello my friend.
I am in the same situation as you , try installing mm and the phone went on bootloop and there did not come out , I've tried everything but nothing updates, the EMUI reaches 5% and then says the software install failed, if you given solution to your problem you ask for help in trying to solve this problem.
I thank you in advance.

[SOLVED] H60-L02 bricked beyond recovery? Plz help me!

edit: If you are just looking for the solution, plz click here: http://forum.xda-developers.com/showpost.php?p=68626049&postcount=11
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)

mike175de said:
Hey there,
first of all I want to say Thank You for this great community and the work at XDA. Awesome. :good:
I bricked my Honor 6 H60-L02 and I am lost to bring it back to life. :crying:
Where it started:
I was using the official ROM from this thread [OFFICIAL] Honor 6 (L02, L12, L04) Stock ROMs. To be more specific it was the latest Android 6.0 EMUI 4.0 B823 that I installed with all the different OTA-Files starting with the original 5.1 ROM B535. The Honor was rooted and also the bootloader is still unlocked (I already checked the status via Fastboot.).
After I while the Honor 6 started to crash sometimes and the headphone-buttons didn't worked anymore. Then a few days ago the phone crashed and I was not able to boot it again.
And so I tried this:
Using the Rollback-Zip to go back to 5.1. But the 3btn-method didn't worked. The phone didn't want to boot into the recovery. Also the Vol+ and Power-Button didn't work to start the Recovery of the phone. Result: Bootloop.
So I installed ADB and Fastboot (with all necessary drivers) and tried to flash the phone with the 5.1 B535 (as mentioned in Honor 6 H60-L02 Hard Bricked - Only access to fastboot (Vol+ and Usb PC)) because there isn't a 6.0 B823 ROM available. I was able to flash boot, recovery, cust, system, userdata and another one I forgot right now. But the result was the same: Bootloop and no 3-btn or recovery via Vol+ and Power-Button. I also tried to flash it with the HonorTool. Same result.
Then I tried to flash different TWRP versions as recovery. Result: The same as above.
So I tried another official ROM 5.1 B526 because someone had the same problem and was able to recover his phone with this ROM (another thread in the forum). But that didn't worked ether.
Then I tried to flash all the img-files of the 5.1. B535 as crc, ptable and so on because I thought that there could be the problem. But when I tried e.g. to flash crc I get the error FAILED: command not allowed. So I tried to unlock the phones partition via Fastboot and fastboot flashine unlock_critical. But using the command unlock_critical gives me also the Failed error. So I was lost again.
Status right now:
I'm still able to boot into the bootloader via Vol- and Power. But right now the phone was running out of battery. Means I see the red battery symbol when I try to start the phone via the power button (without connecting to the PC or charger) but it isn't booting even into the bootloop. The red battery symbol pops up for a second and the screen went black again.
When I use the charger then the symbol changes to a green battery and stays there, but not the moving one that indicates that the phone is charging. When I use the Power button with usb-charger connected to start the phone I'm trapped in the bootloop again.
You see I already tried a lot of different things I could find on the forum. But nothing worked for me.
I know that it was a fault to try to install 5.1 B535 without the rollback, but I wasn't able to rollback as mentioned under point 1.
Maybe anyone could give me a hint and help me to bring my phone back to life.
Thx a lot! I appreciate that al lot!
If you need anymore informations, plz let me know.
Greets, mike175de
P.S: Sorry for my school english. It is a little bit rusty ;o)
Click to expand...
Click to collapse
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.

With which version?
muradulislam said:
Just flash boot, Cust, recovery and system images and let it boot normally. Don't do any button combo. I have had instances where it works. Give it a try.
Click to expand...
Click to collapse
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!

mike175de said:
Thx for your reply.
With which version should I flash? B535 or B526? Should I only flash the three images boot, cust and system? Nothing else?
Thx for a reply!
Click to expand...
Click to collapse
You can use any firmware but the latest one should be better, and flash four images, boot, Cust, system and boot and let it boot normally.
Then put the dload folder with update.app in sd card and do an update from settings.

Thx. I will give it a try when I'm back from work.
I let you know if it is working.

mike175de said:
Thx. I will give it a try when I'm back from work.
I let you know if it is working.
Click to expand...
Click to collapse
I meant to say flash boot, Cust, recovery and system images.
Wrote boot twice

Nothing changed
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike

mike175de said:
Hey muradulislam,
Thx again.
I flashed the images (boot.img twice) but without success. Still the same error (with normal booting aka without any special button combination or with button combination). The honor boots and stays in the bootmode aka bootloop with the led blinkin red. And I still can't boot into recovery via Vol+ and Power..
Any other suggestions?
mike
Click to expand...
Click to collapse
Of all the things you have already tried, the only thing remains to take it to a Huawei service center.
May be someone else can help you here but I have read most of honor 6 and 7 posts and I don't think there is anything there for this problem atm.

Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.

mike175de said:
Hmm, thx. That is bad...
I bought this phone in China when I was there for work. And I suppose that the german service of Huwaei will not help me at all with this phone.
Does anybody else have any clue how to bring the phone back to life?
Thx a lot.
Click to expand...
Click to collapse
I myself have an H60-L01, bought it from china, bricked and tried everything to revive it but could not, still have to try Huawei customer service in Pakistan, am not sure whether they will be able to help me or not, but will give it a try. I wish you luck buddy. Hope you find a solution.

It's alive ;o)
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike

The same can not restore brick
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.

igorxxl said:
Hello! In what condition I have a phone? My phone is loaded in error func_boot_kernel.
Click to expand...
Click to collapse
Have you unlocked and rooted it?
When does it says that message?

error! no func. func_boot_kernel or _recovery
zinko_pt said:
Have you unlocked and rooted it?
When does it says that message?
Click to expand...
Click to collapse
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.

igorxxl said:
The bootloader is unlocked. Root is. Phone is loaded into the error! no func. func_boot_kernel. If you try to enter into the recovery, the error! no func. func_boot_recovery.
The error is the same as here club.huawei.com/thread-7962289-1-1.html
I tried to put EMUI4.0, then the phone stopped working. Through ADB stitched, weighting system, boot, recovery, cust.img. It shows all ok. But then the error again. He tried to put different versions of TWRP. On the 3 button also does not work.
Thank you for your attention to my problem.
Click to expand...
Click to collapse
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.

Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..

igorxxl said:
Nothing helps. I sew different versions via Fastboot. Everywhere all shows OK. However, when you restart the exact same mistake again ..
Click to expand...
Click to collapse
You can also try installing custom recovery and restore a twrp backup of ROM.

zinko_pt said:
You can't use 3 button with custom recovery and root. It wont work.
You need stock recovery in the same version as the rest of files used to flash other partitions.
Flash all stock partitions, then just boot the phone. Check if it works. Forget about TWRP and root for now. One thing at a time.
Click to expand...
Click to collapse
goldfinv said:
You can also try installing custom recovery and restore a twrp backup of ROM.
Click to expand...
Click to collapse

i'm in the same situation with my honor 6 plus pe-ul00 i'll try this metod!

mike175de said:
The phone is working again.
Here are the steps I did for everybody else confrontated with same problem:
1. Download your last working ROM or OTA-File: In my case the OTA-File OTA-EMUI 4.0_H60-L02-L12_B811_B823.zip from this Mega-Link:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!KwhlRKYR
2. Unzip the file and extract recovery.img and boot.img with the Huawei Update Extractor (http://forum.xda-developers.com/showthread.php?t=2433454).
3. Boot the phone into fastboot mode (connect the USB cable, press the power button to turn off and immediately press the volume down button).
4. Use fastboot to flash the two images of 2. If you need fatsboot you can find it here http://www.mediafire.com/download/o5ruw752ked884u/adb+H60.zip (Extract adb.zip and copy the extracted files from 2. in the folder adb. In the adb folder run cmd.exe as administrator.)
5. Use this commands for flashing:
fastboot devices => If the device is recognized correctly it is displaying a series of numbers
fastboot flash recovery RECOVERY.img
fastboot flash boot BOOT.img
fastboot reboot
6. Charge the phone with the Huawei charger, not via USB/PC! (50% is enough.)
7. Download in the meantime the Developer ROM H60_EMUI3.1_Android5.1_6.1.1.zip from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
8. Extract the zip file from 7. and copy UPDATE.app onto your SD-Card into /dload
9. Insert the SD without connecting.
9.1. Disconnect the USB cable from your PC or charger.
9.2. Press the Power button to turn off (maybe that is not necessary.)
9.3. When you feel the vibration press 3btn (Vol+ and Vol- and Power).
9.4. When the Honor logo appears connect your SD-Card (continue to press 3btn for 8 -10 more seconds) => Wait for the recovery process, it should start automatically.
10. After installation Android boots. Skip the first step installation (you should now have the 6.1.1. Developer-Edition installed). Rollback to Android 5.1.1 with the Rollback-File Rollback 591 EMUI3.0.zip from here:
http://www.mediafire.com/download/9qrd8zm9280gy5e/Rollback+591+EMUI3.0.zip
Do do so put the unzipped UPDATE.app from the Rollback-File onto your SD-Card and do a local update via the Update Manager.
11. Boot into Android again (it will still be the 6.1.1 Developer Edition). In my case I want to install the latest Android 5.1.1 B535 from here:
https://mega.nz/#F!ztYliaxL!4gfyXozSW51eNahGZBDgBQ!6w5inQ6Z
I did it via local update again.
12.. After installation and booting => Voila here is your working Android 5.1.1 B535 again. Have fun
13. Brick it again with updating to Android 6.0 [emoji14]
I hope I could help somebody with my experience to bring his/her phone back to life.
CU, mike
Click to expand...
Click to collapse
I got a problem at 9.3 or 9.4. The recovery wont start i see only honor logo i used PE_EMUI3.1_Android5.1_6.1.1.zip (as developer edition i.e sdcard/dload/UPDATE.APP) and PE-UL00-V100R001CHNC00B200.zip to extract and flash BOOT.img and RECOVERY.img
any ideas why i can't enter in recovery? =(
EDIT: "fixed with DC-Phoenix tool"

MATE 7 not booting

Hi, need some urgent help here.
I was trying to install a custom rom, so I unlocked first the bootloader, then flashed twrp 3.0.2 for Android 5.1 and with it I flashed KangVip rom (porto from honor 6).
Problem was it didn't boot, just black screen.
So I supposed the problem was with the rom so I flashed via fastboot the aosp 6, obviously with same results.
I tried lot of stuff (twrp 2.8.x.x, reinstall stock firmware, restore twrp backup of stock full firmware and so on - I did almost everything I could do) and now I'm with a Huge problem: no huawei logo at start, just a white screen and nothing happen. I have twrp 3.0.2 for 5.1 installed right now but I can't install stock recovery.
Please help me, what do I gotta do?
[emoji30]

the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..

fazi2015 said:
the ported rom is based on Android 6.0 you have Android 5.1 youk should flash 5.1 based rom..
it's good to flash stock and update official to b560 or b571 depending on which region to have then flash twrp recovery and then flash desire rom..
Click to expand...
Click to collapse
Thx for this.
But I have a problem, I can't install stock recovery and if I try to flash the .img files extracted from update.app nothing happens.
Also, I still have that problem with huawei logo disappeared and a blank white screen instead.
Sent from my HUAWEI GRA-L09 using Tapatalk

boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....

fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Solved, thanks!
Sent from my HUAWEI GRA-L09 using Tapatalk

fazi2015 said:
boot into bootloader and flash stock recovery but if you know what exactly firmware was you have(bxxx) then no need to flash recovery just put update.app to your sd card and then force update three buttons combination (volume both and power) turn off it remove data cable then press these three buttons it'll go in recovery sometime but try two or three times(in recovery turn off device) and try again if that method not work you should flash stock recovery to do so and if it didn't go to bootloader(fastboot) then connect data cable and then press vol- and power it'll go to bootloader in bootloader flash stock recovery then force update your device....
Click to expand...
Click to collapse
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!

jfer671 said:
Hope you can help me out here...I had just gotten my HAM7 for a couple of days. Was on 4.4.2 B120, was able to get it up to B326. Just yesterday I attempted to flash up to B331 and it succeeded according to the "local update" option. Then it went on boot loop. I tried doing the force 3-button option and that worked to the point of saying it succeeded and will reboot. Now I'm stuck on Ascend Mate logo. I can no longer get into factory option mode (V+Power), only fastboot mode. Also, I can't do force update no more so I can't try any other "update.app" unless I'm missing something here.
Any help in getting this unit at least back to working condition will be a BIG help. I just received this two days ago.
Thx!!!!
Click to expand...
Click to collapse
are you have unlock bootloader or not..

fazi2015 said:
are you have unlock bootloader or not..
Click to expand...
Click to collapse
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.

jfer671 said:
Yes, bootloader is unlocked. FYI, I can't do Vol+ Power or 3-button force. I have no idea what went wrong after the B331 update.app flash. It said successful then boot loop after. I have looked all over the forums and tried everything from flashing C900B300 rollback to try and get 4.4.2 that I started out with, but I really don't know which firmware to start with. The last update.app files I was using was the European variants. Phone was originally locked to Ecuador MoviStar network at B120SP04, then I flashed up to B324 5.1.1. Rooted and then wanted to upgrade to B331 so I unrooted and flashed. Now I'm stuck.
Click to expand...
Click to collapse
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...

fazi2015 said:
now you should flash twrp recovery in fastboot mode and then flash a custom rom like kangvip I'll send you link soon...
Click to expand...
Click to collapse
Thank you very much....hope that will solve the boot issue and bring this unit back to life

Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...

jfer671 said:
Alright, so I've given up complete hope that I can get my unit back up and running again. I've tried so many ways already with no success (fastboot/adb, force upgrade, etc.,), and even tried to copy my second HAM7 images (via sdk tools) and to no avail.
The thing I'm trying to understand is where exactly do I start with trying to revive? When I first got this device from eBay, it was apparently still on "MoviStar" Telefonica-Spain network so my network bars showed "R" for roaming. Somehow, I was able to flash it from being on V100R001C00B120SP04a and upgrade to B127>B145>B324 which made me able to use my own service normally. It worked fine and I was even able to root it. Decided to do a last upgrade to B331 and while the local update option showed it as successfully installed, it went into boot loop ever since. Hence, I used European firmwares for most of the flashing. My second mate was on B145 and I was able to get that to B331, which is running fine right now.
ATM, I am ONLY able to do Volume-/Power to get into fastboot.
Doesn't work:
- V+/Power (stock recovery)
- V-+/Power (3-button force)
What works:
- V-/Power with USB for fastboot
*Bootloader is unlocked, but I do believe that after flashing the last firmware of B331, I may have done a factory wipe, which probably reset the USB debugging option as well. So, I'm sure I'm stuck with a device that just might be flashed on the wrong firmware and is factory reset which prevents me from flashing a custom rom or even the stock rom???
Any last advice I would be so thankful for...still waiting on the link for KangVip rom from (fazi2015)
All the best...
Click to expand...
Click to collapse
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..

fazi2015 said:
https://mega.co.nz/#!3N4RzbJY!saB4NY...Ao5goVNiSXAjEc
I am not 100% sure about this rom but you can try it in fastboot you should flash twrp recovery first..
Click to expand...
Click to collapse
Unfortunately, it says the file is no longer available

jfer671 said:
Unfortunately, it says the file is no longer available
Click to expand...
Click to collapse
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597

fazi2015 said:
try this all information is here
https://forum.xda-developers.com/mate-7/orig-development/rom-kangvip-rom-mate7-emui3-1-b351-t3228597
Click to expand...
Click to collapse
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts

jfer671 said:
Okay, so final result is I'm stuck on a frozen logo now. The twrp bat file again showed success in flashing and rebooted the device, but I'm hung on the "Huawei Ascend" logo. I have to pull the battery to shut it off, otherwise it stays on. So I'm now sure that it's a hard bricked device since I did the stupid thing of factory resetting which probably reset the usb debug...making it almost impossible to flash any firmware now.
Thanks for the help anyways...I really appreciate it. Gonna throw this up on eBay and see if anyone wants it for parts
Click to expand...
Click to collapse
I know it's annoying but last time I research more and guide you I was have same problem don't give up....

I send you recovery flash in fastboot no need of usb debugging usb debugging need for adb not for fastboot in fastboot flash recovery by your self download it
https://mega.co.nz/#!GRw0CZjQ!iZllDkA6yJeWk7iEA4vEVA94r2nM_YjAuiS8B9IZdm0
then extract the zip go to resource and hold shift and left click then select open command port here then power off device completely boot into fastboot (bootloader) connect the device to pc and in command port type
fastboot flash recovery twrp_2_7.img
after that type
fastboot reboot and hold the volume- button of device it'll boot into recovery if you success then reply..

I've noticed two things when flashing KK or LP. On KK, the phone does a constant boot loop with Huawei logo (on off on off), but on LP the Huawei logo hangs...it doesn't boot loop. Is this an indication or just a fault with both OS?

Hi guys, I need Help. Honor 4c CHM-U01 Pakistan, stuck on Logo screen

Hi guys,
I was trying to root my phone(EMUI 4.0, Marsh mellow), first i unlocked bootloader, then installed twrp, everything was right till then, when i installed SU, and rebooted the phone got stuck at logo screen.
Then I installed another rom, which changed phone model to HI6210SFT, but wifi and bluetooth was not working.
So, I installed another rom, this time indian version, bluetooth, wifi, sim were working fine, but still Model remained HI6210SFT.
Then i got another rom, this time the pak version, after flashing that, the phone is now stuck at boot screen, nothing works.
I can go into Fastboot, TWRP, but not into UPDATE mode.
I tried flashing multiple roms, still phone is stuck.

Xaadi Xhahid said:
Hi guys,
I was trying to root my phone(EMUI 4.0, Marsh mellow), first i unlocked bootloader, then installed twrp, everything was right till then, when i installed SU, and rebooted the phone got stuck at logo screen.
Then I installed another rom, which changed phone model to HI6210SFT, but wifi and bluetooth was not working.
So, I installed another rom, this time indian version, bluetooth, wifi, sim were working fine, but still Model remained HI6210SFT.
Then i got another rom, this time the pak version, after flashing that, the phone is now stuck at boot screen, nothing works.
I can go into Fastboot, TWRP, but not into UPDATE mode.
I tried flashing multiple roms, still phone is stuck.
Click to expand...
Click to collapse
You nerd to flash stock ROM...

hassanjavaid8181 said:
You nerd to flash stock ROM...
Click to expand...
Click to collapse
How, can you explain please?I tried flashing at least 4 different roms, the only one booted the phone but the problem was the phone had no connectivity, i cannot go into UPDATE mode, so tried flashing via fastboot. but still no luck, its stuck on the first screen...
any help will be appreciated, thanks in advance

hassanjavaid8181 said:
You nerd to flash stock ROM...
Click to expand...
Click to collapse
all those 4 roms were stock.

Xaadi Xhahid said:
all those 4 roms were stock.
Click to expand...
Click to collapse
Flashed it via dload method?

hassanjavaid8181 said:
Flashed it via dload method?
Click to expand...
Click to collapse
no, via FASTBOOT method, System.img, recovery.img, boot.img
I tried the dload method, but the phone doesnt go into UPDATE mode, instead it goes to twrp on pressing Vol +, Vol - and power button

Xaadi Xhahid said:
no, via FASTBOOT method, System.img, recovery.img, boot.img
I tried the dload method, but the phone doesnt go into UPDATE mode, instead it goes to twrp on pressing Vol +, Vol - and power button
Click to expand...
Click to collapse
You will have to flash stock recovery then use dload method
Dload will not work on twrp..

hassanjavaid8181 said:
You will have to flash stock recovery then use dload method
Dload will not work on twrp..
Click to expand...
Click to collapse
It should work, dload method doesn't use normal recovery. I think it uses eRecovery.

Thanks, I will try your methods, and will update if i get lucky.

Xaadi Xhahid said:
Thanks, I will try your methods, and will update if i get lucky.
Click to expand...
Click to collapse
First of all install TWRP from Here
https://forum.xda-developers.com/p8lite/orig-development/twrp-t3583180
Now Download the MM Rom From Here
http://www.carbontesla.com/2016/07/download-honor-4c-b530-marshmallow-update-india/
Now wipe all partitions from TWRP
and flash the MMRom.zip through twrp it will boot your device normally.
For more info go to this link
https://forum.xda-developers.com/honor-4c/how-to/installing-p8lite-roms-honor-4c-t3617942

try using adb
Xaadi Xhahid said:
Hi guys,
I was trying to root my phone(EMUI 4.0, Marsh mellow), first i unlocked bootloader, then installed twrp, everything was right till then, when i installed SU, and rebooted the phone got stuck at logo screen.
Then I installed another rom, which changed phone model to HI6210SFT, but wifi and bluetooth was not working.
So, I installed another rom, this time indian version, bluetooth, wifi, sim were working fine, but still Model remained HI6210SFT.
Then i got another rom, this time the pak version, after flashing that, the phone is now stuck at boot screen, nothing works.
I can go into Fastboot, TWRP, but not into UPDATE mode.
I tried flashing multiple roms, still phone is stuck.
Click to expand...
Click to collapse
you can use adb if your custom recovery is working, the do a sideload

brianjb_jbbrian said:
you can use adb if your custom recovery is working, the do a sideload
Click to expand...
Click to collapse
What about if the recovery is not working?

arczangel said:
What about if the recovery is not working?
Click to expand...
Click to collapse
You can flash stock recovery via adb fastboot..

arczangel said:
What about if the recovery is not working?
Click to expand...
Click to collapse
Extract ur exact stock rom using Huawei extractor and then flash the system.img and cust.img

question about particular stock firmware ?

so i went to this website:
https://romfirmware.com/2017/07/28/huawei-honor-6x-bln-l24/
and it has some different firmware things for the honor 6x BLN L24 model.. and one of them is a point version variant that says can be flashed through twrp?
will this work should i trust this?
edit// on the site it says the version for it is BLN-L24C567B360 however mine is BLN-L24C567B366 (5.0.1 EMUI..i think B360 is EMUI 5.0?)

Rommco05 said:
You have a newer firmware on your phone. Yes point version can be flash over twrp in some situations, same like over dload
Click to expand...
Click to collapse
can you explain what dload is to me? this phon is my first phone ive had that i could really do something with in the rooting community.. my other one was a galaxy grand prime with no rom support or any img files and it got bricked cause i of course had to screw with the build.prop file XD

Rommco05 said:
You must turn off the phone before installing. You need to turn it on with holding all 3 buttons ... vol + + down + power button, after that will start installation
Click to expand...
Click to collapse
okay... so after i extract the particular recovery image i need.. i reboot to the fastboot menu, use adb to flash over the img, like i did with twrp... and reboot into the stock recovery menu?

Rommco05 said:
Basically yes. What you need to do after?
Click to expand...
Click to collapse
put the update.app file in a folder on my sd card called dload. and update from sd card?
also i got two files.. recovery.img and recovery2.img... which do i use ?

okay so i read on a thread for the honor 7 having two recovery images... one being the stupid erecovery crap and the other being normal recovery menu? and i guess im able to get both regular and twrp running together on two different partitions somehow?

Rommco05 said:
You can not have two recovery on your phone. For you, only recovery.img is important. Why do you need to replace twrp for stock recovery?
Click to expand...
Click to collapse
i ****ed up my phone... the good backups i had with twrp got ****ed up and are some messed up rooted version running a stock rom where the sound doesnt work at all, speakers headphone, blue tooth calls, apps, etc and camera doesnt work (front and back and camera app doesnt run) and i cant watch any videos on any app.. so i was going to restore the stock firmware

i still use adb reboot recovery to boot into the regular recovery menu ? (not erecov)

alright.. im stuck again.. i rebooted to recovery and it gave me 3 options. reboot, wipe data/factory reset, and wipe cache partition... what do i do to install the firmware??

see its almsot 4 am for me right now.. if you could just talk me through this i would be okay..

never mindd i looked at your previous reply

and i believe its stuck at 5%

alright well it just rebooted and it didnt restore the stock firmware..i still have all my apps and **** and nothing has changed

do i have to factory reset it now? or..

xSpartacusx said:
do i have to factory reset it now? or..
Click to expand...
Click to collapse
If all working then dont go for factory reset. let it be like this.

shashank1320 said:
If all working then dont go for factory reset. let it be like this.
Click to expand...
Click to collapse
nothings working still . camera, sound videos, etc.. still broken.. phone still rooted.. i followed this other ugie i saw on here where you wipe all partitions and things and then do the file from dload and things, and it still stuck at 5%?

heres another question.. when i went through the firmware finder i got 3 files.. update.zip, update_data_full_public.zip, and update_full_BLN-L24_hw_usa.zip they all contain a update.app file... am i using the right one? im using the one from update.zip

now it appears to be stuck at the boot animation screen.. fml
//edt: standby... i actually havent finished the guide..

yup.. i dun ****ed up.... i cant use adb to reboot to recovery.. say null device not found..
i can go into fastboot by doing power and vol down... if i do vol up and power to try to get into recovery/twrp/whatever, it does nothing and does the normal booting process.. holding all three down just does the automatic sd card install thing that doesnt work... what do i do? i think i ****ed it up

well as far as i can tell my phone is bricked cant boot into recovery via key presses or adb.. i get device not found on adb..
fastboot works and i can flash still but i cant get into twrp or anythin i dont know why..
if i let it boot it just stays at the bootloading animation..
am i able to do factory reset from fastboot?
//edit: i did fastboot erase userdata accoring to some websites online.. no success in booting... is there anything i can do at this point?

Rommco05 said:
Disconnect the phone from the usb and switch off. Turn on and hold the power button + vol up when you see the Honor logo release power button but still hold the vol. Now you should be in recovery, perform factory reset
Click to expand...
Click to collapse
thank you so much for that little tip i thought i ****ed something up that was preventing it from going into recovery..
omg thank you so much it booted to the set up menu... thank you... ill report back with the status of camera and sounds and things