AUX Problem - Mate 8 Q&A, Help & Troubleshooting

Hello
I have small problem with AUX in car i have car radio with aux hole i have aux cable but when i connect my mate with aux than on radio and when i run music on phone sounds come from phone speakers and not from car speakers i turn on aux on car radio i try with P9 and is same i try in few other cars but aux not work
Is there any fix or solution about that?

i've the same issue in mate 8, occurred right after I've upgraded to nougat.

i have the same problem

Maybe you've got some dust inside the headphone jack?

Any answers?
I have the Mate 9 and I am experiencing the same issue with the aux cord. I connect it to my card but the audio plays through the phone and not through the car stereo. The headphone jack is clean and when I connect headphones it plays through the headphones. It just not recognizing the aux cord.

Related

Build me an audio adapter please?

I'm on my second Audio adapter from Pocket PC Techs: http://www.pocketpctechs.com/detail.asp?Product_ID=PPCPADPT01. The first one would sometimes only play the left or right speaker and I'd have to jiggle the wire on the adapter for it to play properly. I returned this for a second one which worked fine up until last week when it started to pop the speakers in the car when the slightest jostling of the wire occured (hitting bumps). I've got it connected to the XDA 2 and then to a cassette adapter with 3.5mm jack in the car. The cassette adapter works fine on the iPAQ H3970 and the XDA 2 works perfectly with the included stereo headset. Another problem with the PPCTechs audio adapter is that the microphone doesn't work in the 2.5mm headset jack part.
I know there are people out there who have canibalized their included stereo headsets to make audio adapters and also people who have made their own USB adapters with audio out capabilities. Is anyone interested in making one for me?! I can send a canibalize-able stereo headset with the proper audio jack if needed.
I would like either:
- A modified stereo headset cable with microphone that connects to a female 3.5mm stereo headset jack.. or directly to a car cassette adapter.
...or...
- A serial port connection that can output stereo audio to a 3.5mm female audio jack, includes a microphone or 2.5mm mono headset jack, and provides charging capabilities.
I imagine the former choice would be easier, but none of my local electronics repair shops want to do it and I don't have the tools or experience to do it right. The latter would be nicer. I'd buy a car kit, but I havn't seen any that work with the XDA2 and provide audio out that can connect to the car stereo. I want both stereo music/movies to be played in the car stereo speakers as well as GPS navigation commands and (sometimes) phone calls... and I want Voice Command to work (hence the need for a microphone)!
Please PM me with costs if some one can do this for me.
Adamz- Did you push in the connector from the Audio all the way in? I used the handsfree set ( supplier with MMDA II) and it was not working properly and was also loose until I found that you have to really push it firmly.
I am suprised if you did do that and it still does not work as you said it has all the connectors
I am also looking for a similar solution using the same principle. The other sync input I use for mt GPS connector/ charger . was going to try the Audio adaptor that you are using with a mute box through to a speaker .
Can any one help?
Adamz:-
Did you read this topic?
Maybe this might work for us.
http://forum.xda-developers.com/viewtopic.php?t=5061
http://www.mobiles.co.uk/images/accs/safetalk.jpg44
:lol:
Nah, I want stereo quality music to be played in the existing speakers in my car. I also want GPS navigator instructions to be played in the car stereo as well as phone calls. I've got a Bluetooth GPS reciever, so I don't really need a serial connection.
The PPCTechs adapter is fully inserted into the audio jack, although sometimes pushing it too far makes it stop working as well! But if I jiggle the wire, sometimes it does work... then if I hit a bump, maybe it will stop working.
I'm thinking the USB Cradle with Audio might be good. If that's got a 3.5mm female stereo jack in the back, I can plug the casette adapter into that. Plug the USB into a cigarette lighter adapter... and that should be all set sinc the Audio USB cradle supposedly has a microphone in it.
Those don't seem to be available yet though.
Found this on the net
http://www.boostaroo.com/products.html

Sound while plugged into car charger

Hello!
When I plug my Touch Pro into an active Adapt carholder the sound output of my touch is forced to the charger (no sound output anymore on my mobile).
Is there any way around this? Any registry setting?
Or maybe remove some of the pins from the mini-usb connector on the charger?
Try getting HTC's official dongle which plugs into the USB port and gives you several connectors;
USB for charging
3.5mm headphone socket
2.5mm mini-headphone socket
USB for HTC's original supplied headphones
If you use this, you can plug in headphones at the same time as charging. I use it to route sound through to my car stereo so I can use the phone as an MP3 player and Sat-Nav.
If you don't use the headphone sockets, sound still comes out through the main speaker on the phone.
Hmm I have one of those, but the car charger I use is a slide-in holder, so there won't be much room for the dongle
Microphone unuseable when plugged into stereo
I use the usb dongle adaptor in my car to push sound through the stereo, however this disables the HTC Touch Pro microphone so although I can hear people calling in (through the car speakers) they cannot hear me.
I think it is because the phone thinks the headphones are plugged in and that I'd use the headphone microphone.
Does anyone have a tweak which would allow the phones microphone to remain in action when using the dongle?
Many thanks
rjbarrington said:
I use the usb dongle adaptor in my car to push sound through the stereo, however this disables the HTC Touch Pro microphone so although I can hear people calling in (through the car speakers) they cannot hear me.
I think it is because the phone thinks the headphones are plugged in and that I'd use the headphone microphone.
Does anyone have a tweak which would allow the phones microphone to remain in action when using the dongle?
Many thanks
Click to expand...
Click to collapse
+1 to that... i would like to know a fix for that
I have a Brodit holder for my car (http://www.brodit.com/images/234542.pdf)
And i have the same problem, is ther any solution for this?
rjbarrington said:
I use the usb dongle adaptor in my car to push sound through the stereo, however this disables the HTC Touch Pro microphone so although I can hear people calling in (through the car speakers) they cannot hear me.
Click to expand...
Click to collapse
I don't have that problem at all, my phone's microphone works fine while using the USB dongle with a 3.5mm jack plugged into it, connected to my car stereo.
Are you using HTC's official dongle, the one with the 3.5mm, 2.5mm USB power and USB headphone sockets?
It works fine for me!

[Q] Headphone Jack Intermittently Working

Anyone else having issues with the headphone jack working or partially working? Yesterday, I noticed that I had my phone plugged into the 3.5mm aux cable on my car but couldn't hear any sound and today I tried listening to music with some headphones but was only getting sound out of one headphone jack (these were on brand new Bose Sie2i). For the hell of it, I rebooted and it worked fine -- my guess is this is a software issue.

3.5mm Headphone Jack software fix? Help?

Im having an issue with the headphone jack. When i plug in headphones or the aux cord in my car the phone recognizes it and plays music. But if the cord is twisted or moved (not unplugged) it pauses the music because it thinks i unplugged the jack. Is there a fix to this? Maybe a software fix to stop the music from pausing when the jack is unplugged?
That means that the jack is dirty.

Question Using wired headphones

I have a Galaxy S7 FE and I have a pair of Sony bluetooth noise cancelling headphones. I can pair the headphones with bluetooth and audio works fine. But sometimes I go on business trips and long flights the battery in the headphones die. In this case I want to connect the headphones using a wire. The headphones have a 3.5mm female connector as well as USB-C. I have tried connecting the headphones directly USBC headphones to USBC tablet and audio doesn't come out of headphones (just tablet speakers). I have also tried using this device and using the 3.5mm cable, still no luck.
Does anyone know how to connect headphones to the tablet with a wire, either 3.5mm or USB-C?
Appreciate any advice.
I am using this one with my Tab S7 FE. Charging and Headphones work even in combination.

Categories

Resources