hello.. i need to download chinese al00 rom for using it in dload mode
my phone is bricked.. tried funkyhuawei but no luck.
accidantly tried to flash euro rom on chinese phone then my phone got bricked.
no im stuck on boot loop
any help?
Maybe try hisuite to recover ur phone.
no luck.. wont recognize the phone on e recovery ..
I never used hisuite to recover cause i don't have Chinese version but i heard it can be done,maybe try it in fastboot mode.and use the chinese hisuite.
Related
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Sherif Nassif said:
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Click to expand...
Click to collapse
I had tried all the methods in the globe to flash the 4 files cust,recovery,system..etc and nothing happened
till I got this program from another thread the program called DC Pheonix
the advantage of this program is that you can flash all the image files of any update.app while if you try to flash for example sensorhub.img using fastboot , you will get a message that command not allowed
so install the program and buy a 15 Euoro credit and flash the original last ROM that was on the phone
I could not wait till the morning I downloaded Phoenix DC and bought 15 credits = 15 Euoros and flashed the original update.app which was the chinese version MT7-TL10C00B357
The phone is working well nowwwwwwwwwwwwwwww Yupeeeeeeeeeeeeeeeeeeeee
I am so Happy
Happened to me before, sounds wierd but actually , I thought it's a hard problrm to solve and that actually made me solve it after working for 8 hours and the solution simply was reboot in fastboot and rescue mode will be Rescue&fastboot mode , then flash
Sent from my JAZZ using Tapatalk
good evning
i was a king vip user then tryed to flash stock rom at the momment i am stuck in bootloop
i ave try to and extract updae.app and took the file and flash them vis the knife tool with no lack
phone is unlooked and i can enter fast boot when ever i flash twrp its replaced by erecovery
any seggestion
dont waste your time
this is the only solution to unbreak your phone in case you cant access TWRP and Dload page
followe the instruction
https://forum.xda-developers.com/ma...l29-al10-stuck-fastboot-t3599775#post72305372
Hello everyone,
I've honor 6 L12 rooted, unlocked bootloader as I can see in fast boot and multi tool, I've installed TWRP recovery.
I just made a backup through TWRP saved in internal SD storage, and try to install but since that try, I hade problem like model changed to L01 and my version is ending with B000
Also the shape and look (of firmware and theme), have been changed.
I don't know what happened and why!
I tried to to restore custom rom and recovery but couldn't.
Now I can't use recovery mod because it's giving me this: Error!
Function No : (Func_Boot_RECOVERY)
Error No : 2
I've tried to use multi tool giving me error with any writing to device:
Faild remote command not allowed
Note: I'm still able to access normal mod, but it's hard, I've to try ton of times pressing buttons to boot to normal mod.
Please any help dears.
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
ALHARTHI6 said:
Update:
Now my device is not booting to nermal mode anymore.
I kept flashing through unbrick tool in multitools.
But I don't know exactly which firmware and model to flush!
And now I'm stuck on recovery mode (also with same error above) and fastboot mode when I restart and connect device to pc keep pressing volume down.
Any single help!
Click to expand...
Click to collapse
Which firmware you were on before issue?
No I didn't
As I said trying to restore my backup through TWRP but was in internal SD., that's it.
My real model is L12.
Version, I don't remember but it was on android 5.1.1 EMUI 3.1
Now I just used Sd method and recover device with last 4.0.1 EMUI for devolvers, but no Arabic language.
How to go to another firmware?
What is the best, satable one for my device?
And is there a good custom stable rom, especially if android 7 ?
Please full answer if available
Thanks again
hi i changed my chinese honor 8 al10 to l09 and it was working good for a while until i had issues with the signal in lineage based roms so i tried to reflash it and now it wont let me into erecovery and twrp it keeps saying your device is booting now ive tried to use a rollback package but it gets stuck as honor logo screen and stays there i can only get into fastboot and rescue mode ive tried to reflash the recoveries they say there successful but wont let me boot back
kewlpanda said:
hi i changed my chinese honor 8 al10 to l09 and it was working good for a while until i had issues with the signal in lineage based roms so i tried to reflash it and now it wont let me into erecovery and twrp it keeps saying your device is booting now ive tried to use a rollback package but it gets stuck as honor logo screen and stays there i can only get into fastboot and rescue mode ive tried to reflash the recoveries they say there successful but wont let me boot back
Click to expand...
Click to collapse
After dloading rollback package format the phone
It was supposed to go to factory reset but it didn't. It gets stuck in the booting section which makes me think its recovery was corrupted. It was on emui 8 China version. Now, I can't get to fastboot since it restarts directly to this section after showing the honor logo. I tried using DLOAD with emui frimware update.app but it doesn't go to update mode. Is it bricked?
hi. did you fix it. i am in the exact same problem please someone help.