I recently tried to install CWM Recovery in my Huawei Honor 4C and it was successful.
" YES! I installed Cofface Recovery, and I can now install Custom ROM!"
But then I found that its really hard to find a custom ROM for my model.
" I have to return my default ROM and update to lollipop since we have new update."
But then, every time I install the ROM (dload/UPDATE.APP) I realized something.
" my new CWM Recovery needs an Update.zip (ZIP format and not .APP format).. I have to do something."
I search how to convert .APP to ZIP but nothing, all methods from internet is not effective...
" What should I do? Im so tired"
So I decided to remove my new CWM (Cofface REcovery)... and try to install my update.app using normal method (dload/update).
"OMG!!!! my phone hang, not even loading any recovery.. CWM Recovery (Cofface REcovery) and default recovery is not showing, only honor logo"
I have tried Volume + and - bla2x... method.. not working neither..
I BADLY NEED HELP FROM GOOD DEVELOPER!! THANK YOU SO MUCH
(Sorry for my english )
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Sherif Nassif said:
Good Day every one
I really need your urgent help
I have a chinese Mate7 Gold dual SIM that I upgraded it till I reached MT7-TL10C00B357 using OTA
I have unlocked the bootloader and rooted the phone and installed TWRP 2.7.8.0 for lolipop
then I tried to install a middle east update.app by extract the file and make flashable Zip using huawei extractor
after this trial the Phone went to rescue Mode with no access to TWRP Recovery
I have tried the following with No Use
1-Install huawei suite 4 and trying system recovry ...it install the recovery and when installing the system it fails and after that the phone goes back to rescue mode with no access to rcovery
2- I extracted the Cust, Recovery, System, Boot and userdata from the Stock Rom MT7-TL10C00B357 and I flashed them using fast boot flash after putting the phone in fastboot rscue mode... the flash was OK but after the five files were flashed and trying to reboot, the phone goes back to rescue mode
3- trying the same as step 2 and trying to flash the update.app using three buttons flash... the phone stuck at Huawei Ascened Logo and nothing happens
4- trying another Update.app of Android 4.4 and extracting cust,recovery,boot, system and userdata and flash them using fast boot.. flash is ok but rescue mode is still presist
5- I have tried several times to flash TWRP again .. the flash is ok but no access to TWRP only Rescue mode or fastboot rescue mode
6- I tried to change to oeminfo and custom.bin to be eu using Huawei SRK tool 1.8 but I failed
when trying to adb devices the result is empty
I heared from one psot that this might be a problem in the sensor although I dont see a direct relation
so any one could figure out a solution to this problem
I guess I have all the tools necessary but cant find a working solution
Please help me urgently
Click to expand...
Click to collapse
I had tried all the methods in the globe to flash the 4 files cust,recovery,system..etc and nothing happened
till I got this program from another thread the program called DC Pheonix
the advantage of this program is that you can flash all the image files of any update.app while if you try to flash for example sensorhub.img using fastboot , you will get a message that command not allowed
so install the program and buy a 15 Euoro credit and flash the original last ROM that was on the phone
I could not wait till the morning I downloaded Phoenix DC and bought 15 credits = 15 Euoros and flashed the original update.app which was the chinese version MT7-TL10C00B357
The phone is working well nowwwwwwwwwwwwwwww Yupeeeeeeeeeeeeeeeeeeeee
I am so Happy
Happened to me before, sounds wierd but actually , I thought it's a hard problrm to solve and that actually made me solve it after working for 8 hours and the solution simply was reboot in fastboot and rescue mode will be Rescue&fastboot mode , then flash
Sent from my JAZZ using Tapatalk
1. Get bootloader unlock code https://emui.huawei.com/en/plugin/unlock/index
2. Enter fastboot mode [voldwn+pwr] and unlock bootloader (fastboot oem unlock xxxxxxxxxxxxxxxxxx)
2. Download and flash TWRP_3.0.2_CUN-l03-l21.img or View attachment CWM_CUN-l03-l21.img recovery from fastboot (fastboot flash recovery xxxxxxxx.img)
3. Enter TWRP/CWM recovery mode [volup+pwr] flash supersu.zip and its done!:good:
https://youtu.be/nh9o8kP6HhA
Tested and working on CUN-L21 and L03, please test it on L29, l22, etc and post here the result!
FOR L21 USERS: THIS ONLY WORKS FROM B103 UPDATE YOU CAN TRY WITH THIS(sdcard method) or THIS(not tested)
CREDITS: CELULARSERVICE.UY
Awesome man
hernankano said:
1. Get bootloader unlock code https://emui.huawei.com/en/plugin/unlock/index
2. Enter fastboot mode [voldwn+pwr] and unlock bootloader (fastboot oem unlock xxxxxxxxxxxxxxxxxx)
2. Download and flash TWRP_3.0.2_CUN-l03-l21.img or View attachment 3999777 recovery from fastboot (fastboot flash recovery xxxxxxxx.img)
3. Enter TWRP/CWM recovery mode [volup+pwr] flash supersu.zip and its done!:good:
https://youtu.be/nh9o8kP6HhA
Tested and working on CUN-L21 and L03, please test it on L29, l22, etc and post here the result!
CREDITS: CELULARSERVICE.UY
Click to expand...
Click to collapse
Absolutely Brilliant !!
Works perfectly on the CUN-L01.
Thanks again.
Sparkrite said:
Absolutely Brilliant !!
Works perfectly on the CUN-L01.
Thanks again.
Click to expand...
Click to collapse
Thank you, I'm glad that it worked for you.
Hi, thanks for the solution! Can I backup all of my data (system, app data) before unlocking bootloader? I can't root actually.
hollarp said:
Hi, thanks for the solution! Can I backup all of my data (system, app data) before unlocking bootloader? I can't root actually.
Click to expand...
Click to collapse
You can backup your apps by using any of the apps available from play store, however without root these probably won't backup the apps data.
No need to backup system as this won't be affected by unlocking bootloader. The recovery partition will of course be overwritten when you flash TWRP.
Remember unlocking bootloader does factory reset the phone.
y5 cun-l21
help me!!! after flashing recovery i cant boot to recovery im trying with adb and manual but it shows huawei logo and reboots to normal mode
huawei y5 ii cunl21
t214 said:
help me!!! after flashing recovery i cant boot to recovery im trying with adb and manual but it shows huawei logo and reboots to normal mode
huawei y5 ii cunl21
Click to expand...
Click to collapse
How exactly are you flashing your modified recovery?
Remember after flashing it you MUST immediately boot into recovery (Vol up + Power) or else the system will replace it with the stock recovery.
Sparkrite said:
How exactly are you flashing your modified recovery?
Remember after flashing it you MUST immediately boot into recovery (Vol up + Power) or else the system will replace it with the stock recovery.
Click to expand...
Click to collapse
im flashing it with fastboot and after that im trying to go to recovery but it shows huawei logo for few seconds and rebooting now i cant go to recovery and i cant find stock recovery anywhere
t214 said:
im flashing it with fastboot and after that im trying to go to recovery but it shows huawei logo for few seconds and rebooting now i cant go to recovery and i cant find stock recovery anywhere
Click to expand...
Click to collapse
Don't know why its not working but here is a link to two genuine stock ROMS for the y5II.
http://consumer.huawei.com/lk/mobile-phones/support/downloads/huawei-y5ii_lk.htm
If you dont want to try flashing the whole rom then download "HuaweiUpdateExtractor" tool and extract just
the recovery partition from either of the roms and flash just that recovery.
Let me know how you get on.......
i have flashed stock recovery and it worked it means i could go to recovery but when i want to flash again twrp or cwm it isnt working
after flashing twrp/cwm the huawei logo shows for 1 second and again rebooting to normal mode
cant flash whole rom because of "error: current version is not in VERLIS, unallow to update."
t214 said:
i have flashed stock recovery and it worked it means i could go to recovery but when i want to flash again twrp or cwm it isnt working
after flashing twrp/cwm the huawei logo shows for 1 second and again rebooting to normal mode
cant flash whole rom because of "error: current version is not in VERLIS, unallow to update."
Click to expand...
Click to collapse
Which stock recovery did you flash and did you use the Huawei Extract tool to extract it, if so what size was it exactly?
i was trying to flash both with cun-l22 recovery using update.app
Excelent!!!!
Working on CUN-L23. Thanks!!!
t214 said:
i was trying to flash both with cun-l22 recovery using update.app
Click to expand...
Click to collapse
OK, you are not giving me much information as to EXACTLY what you are doing, like what commands you are using and the responses you are getting and so are making it very difficult for me to help you.
Do you have a working recovery or not ?
BTW you cannot flash the Update.app from recovery, I suggest you do some research on how to use Dload.
I have attached a small PDF to get you going.
Huawei Update extractor tool is very handy though.
custom recoveries from this topic dont work for me
my stock recovery (cun-l21) dont work(cant get it anywhere)
flashed recovery from cun-l22 works but from cun-l29 its not working
now i only have cun-l22 recovery working on my phone
trying to flash stock rom (CUN-U29, C567B128, Sri Lanka) using cun-l22 recovery it shows: "verify: uboot partition unallowed chang, old_address=1c80000, new_address=712000 error: partition verify is failed Update /sdcard/dload/update.app failed"
trying to flash stock rom (CUN-L22, C567B128, Sri Lanka) using cun-l22 recovery and it shows: "main version from property is cun-l21c79b104-1 the cur_num:1 update_num:1 version check failed error: current version is not in verlis, unallow to update Update /sdcard/dload/update.app failed"
i was trying to flash using recovery/vol up +vol down+power/in system option using update
Can I use this recovery on cun u-29
Same problem here as t214. I have the CUN-L21. Flashed twrp , didn't work , flashed back the L22 stock recovery , that doesn't work for me also so now i don't have any recovery. Does anybody have a solution for this ?
---
L.E. : managed to make the stock CUN-L22 recovery work , but still cannot flash TWRP or CWM , both cause 1-2 reboots and then normal booting , then i have to revert to stock again.
Can confirm this DOES NOT WORK on the CUN-L21. After flashing, Trying to boot into custom recovery takes you to a black screen for 1 second then continues to 'normal boot'. Now I have no recovery at all. What do I do?
HellBlaZer69 said:
Can confirm this DOES NOT WORK on the CUN-L21. After flashing, Trying to boot into custom recovery takes you to a black screen for 1 second then continues to 'normal boot'. Now I have no recovery at all. What do I do?
Click to expand...
Click to collapse
Hello. Do what sparkrite said on the first page. Download the full rom from that Huawei website (the cun-l22 one , but it works). Download huawei update extractor and load in it the update.app. inside you will see recovery.img. Right click and extract. Flash that. Worked for me , i have stock l22 recovery , i don't know if it will be a problem on the long run but i can't find it for l21 anywhere.
please help me i hase emui 4..1
and i install twrp 4.1 and when i install nougat i install
supersu_v2.79_sr2 then
update_2 but when istall update it stop on writinh ratio i shut dun the phone but no login to twrp or to stock recovery
help me plaese
i flashed twrp from SRKTool the phone bootloop and i canot poweroff please help me
i was on 4.1 and i was unlock bootloader and twrp and i was insall nougat l29c185b560 wich have 3 files
supersu_v2.79_sr2 ----update_2------update_data_full_hw_meafnaf
when i flash update.zip in twrp it stop install on ratio i sutdown the phone and now the phone
is bootloop and not shutdown i try flash many recovery same problem my phone
is l29c185b--
https://forum.xda-developers.com/mate-8/general/how-to-install-nxt-l29c185b560-official-t3556789
I canot power off my phone but when I waited until the battery was discharged but the phone restart alone
I use method two by flash .img cust complet recovery complet boot complet but when flash system.img faild the rom exracted is l29c185b320
I try flash boot cust boot and system from nougat it complet but the problem same I canot dload I canot boot to recovery for wipe and the phone stay restart
please any help when I was flash nought it not complet it stop on writing ratio so I power off phone then the problem haben
boot loop my phone any help!!!!!
Hi guys, i need your help!
i will try to explain the situation at my best.
A couple of days ago i decided to go back from a custom ROM to the Stock one via TWRP flash and i ended up with a soft brick, later i managed to flash the stock rom with SP Flash tool.
Yesterday i tried to get ROOT access on the fresh installed stock rom and considering that i wasn't able to get ADB and Fastboot to work properly on my pc (at the time) i used King Root, after that i tried to install TWRP through the official app, the result was not successful (the problem was the locked bootloader) and i found myself without recovery (neither TWRP or Stock).
Here comes the last part (the tricky one)
after all this mess I managed to get ADB and Fastboot to work and i obviously tried to unlock the bootloader, unfortunatly i hit "boot to recovery" and now i'm stuck with a boot loop with no recovery.
if i try to get to fastboot with Vol down+Power the phone shows the LeEco Logo and then the screen shuts down.
Sp Flash tools doesn't work either.
Any possible solution?
The thing u got wrong is that... U should have flashed twrp on either eui 5.8.17s or 5.8.19s...
Don't flash it on 14s or lower eui version ... It might get stuck on bootloop