Database Info

OEM HTC One X Case

http://www.mobilefun.co.uk/htc-one-x-official-hard-case-hc-c704-blue-p34713.htm
Anyone using that case?
Thanks in advance!

Had it. Returned it.
Offers no protection and makes the phone very slippery.
Got it for $15. Not worth it. Definitely not worth it at $30.
All imo of course.
Sent from my HTC One X

sharp2G said:
http://www.mobilefun.co.uk/htc-one-x-official-hard-case-hc-c704-blue-p34713.htm
Anyone using that case?
Thanks in advance!
Click to expand...
Click to collapse
If you don't want any protection go for it.
Sent from my HTC One X using xda premium

How ridiculous of HTC to release such a flimsy case for such an expensive price. I saw a picture of this case snapped in half quite easily.
Clearly someone at HTC was playing a joke, I mean blue and orange? $30? I feel like they're virtually feeding us crazy pills.
Sent from my HTC One X using xda premium

I like mine and use it when not at work. I work out in the field and use the best buy case and holster combo. It's nice when going out to dinner and showing off the great design of the one x. FYI that link is for the one x and not for the att or rogers(xl) version.
Sent from my HTC One X using xda premium

I realize now that this is a slightly different case than the one I was mentioning. This is the official case for the international One X. I don't know if this is quite as flimsy as the one for the One XL, but it probably wouldn't fit on the XL anyways. Could anyone confirm this? i'm interested in grabbing the white one for my fancy times.

The white one reminds me of a golf ball.. but they should've kept this pattern for the US version instead of the stripe/bar pattern we got.

I can't vouch for that one specifically. I do have the HC 700 for my XL though. Unfortunately since I'm a new user it won't let me link it, but you can find it on the site you found that one under the HC 700 model number.
It's for the International version but I decided to give it a shot for my phone. It does fit, just not perfectly. You can feel a little(barely) flex in it if you press down on the back of the phone's edges. The camera lens also doesn't line up completely but luckily the flash is not covered and the lens is not covered, just a little of the ring around the lens gets obscured by the case. Same thing goes with the hole for the speaker, it just barely comes up to the point where the holes for the speaker are but it doesn't cover them, but it does leave a larger gap at the top of the speaker holes. None of the buttons or input/output jacks are affected though. Since that is a similar case I'm sure the results would be similar.
I primarily got the case to keep the back of my White One X(L) from getting scratched, so far it's doing its job so I can't really complain too much about the minor alignment issues.

Yes,also know this case from other forums that it's don't do good protection..

Custom onex case

Howdy guys!!! Just thought I'd share a little project of mine with you. I have always coveted the cuisine et ochs one x so I made one myself. I bought a white case at radioshack and taped it off and painted half of it black. Let it dry for a few days and then I took a screen protector and covered the back so that it wont scratch. Then I made my own black and white background to match. Came out pretty. Anyway here's some pics for you guys.
View attachment 1470208
View attachment 1470209

Nice... lol like the beat logo
Sent from my HTC One XL using Tapatalk 2

Thanks! It was all hand done with a paint marker and some good ol masking tape . I came out much better than I expected. Maybe I ought to start making custom cases lol.

I like that, looks different and real clean.

http://www.ebay.com/itm/HTC-One-X-S...1134191920?pt=Cell_Phones&hash=item3ccccf8d30
Unicorns do exist...but they're expensive.

nice

I have considered painting my otterbox case on a few occasions but I'm concerned the paint will just chip off.
Cool stuff dude!

That why I covered the back with a screen protector. Keeps it looking freshly painted for a long time.
Sent from my Venom 1

What case are you using ??? Just curious
Sent from my HTC One XL using Tapatalk 2

Tell you the truth I don't remember the name of it.Through the package away. But I bought it at Radioshack.......for about 20 bucks.
Sent from my Venom 1

This case is from PointMobi. It's not a half-bad case. I've used it for a bit now and am pleased. RadioShack had a discontinued price tag on it, I bought it for $8.97 or so and they aren't listing it on their site any longer. I also haven't had any luck finding it in a quick Google search.
I've attached a pic of the packaging showing all of the relevant details.

Nexus 6P cases and covers list

Going to have my N6P shortly and plans to have a nice case to have it get protected,however,most are now focusing on iPhone and Galaxy Mobile covers and get few choice from SGP and Amazon, so here please share your case founding and have fun.

I ordered this generic TPU case http://www.amazon.com/gp/product/B015GBA8AE?redirect=true&ref_=ya_st_dp_summary
It says it has shipped already.

I ordered the same but the clear option.

I ordered the MoKo case this afternoon, and it already shipped. Should be here Thursday. Just a placeholder until some nicer cases like Spigen come out.
http://amzn.com/B00JP6FPZA

Ultra Protective Case
I'll be waiting for the second batch of the device, because I want to see reviews, and to avoid any possible quality control issues that might initially exist. With this in mind, I obviously want to protect my investment, what with being a student on a budget. As such, I want to really protect my screen. In fact, just last week I shelled out an unplanned $120 to replace the screen on my S3 i9300, which fell face down in its ZeroLemon battery case. The screen wasn't cracked, but it was damaged in terms of the pixels. It started out with a purple spot, and got progressively worse overnight, to where it was totally black, and unusable. Does anyone know if a Ballistic, Trident, or UAG case will be made available for the 6P? Are there any other ideas as to the type of case I'm looking for, besides those I mentioned?
Thanks!

fAndroid513 said:
I'll be waiting for the second batch of the device, because I want to see reviews, and to avoid any possible quality control issues that might initially exist. With this in mind, I obviously want to protect my investment, what with being a student on a budget. As such, I want to really protect my screen. In fact, just last week I shelled out an unplanned $120 to replace the screen on my S3 i9300, which fell face down in its ZeroLemon battery case. The screen wasn't cracked, but it was damaged in terms of the pixels. It started out with a purple spot, and got progressively worse overnight, to where it was totally black, and unusable. Does anyone know if a Ballistic, Trident, or UAG case will be made available for the 6P? Are there any other ideas as to the type of case I'm looking for, besides those I mentioned?
Thanks!
Click to expand...
Click to collapse
A good case and a tempered glass screen protector should help a lot. That's what I usually use for my phones
Sent from my D6603 using Tapatalk

doubleatheman said:
Mod Edit : Links removed
Click to expand...
Click to collapse
You might want to talk to them because that case is blocking the laser. http://www.androidpolice.com/2015/0...6p-cases-appear-to-block-the-laser-autofocus/

Good to know, I will inquire further with them. I thought it wasn't, but I didn't look that closely.
zephiK said:
You might want to talk to them because that case is blocking the laser. http://www.androidpolice.com/2015/0...6p-cases-appear-to-block-the-laser-autofocus/
Click to expand...
Click to collapse

doubleatheman said:
Good to know, I will inquire further with them. I thought it wasn't, but I didn't look that closely.
Click to expand...
Click to collapse
Please let us know what they say as I'm interested in that case too.

Mod Edit : Links removed
Man, I hope they fix the not covering of the laser, because this is one sexy looking case.

WilliamStern said:
doubleatheman said:
Man, I hope they fix the not covering of the laser, because this is one sexy looking case.
Click to expand...
Click to collapse
I sent an email to the manufacture today, I didn't yet get a response. One other buyer on Amazon (via a review) reported he got contacted back by the manufacture, and he pasted an email from them stating the photo is only a prototype. It makes sense as the case won't mail out for a full month. The month delay is OK with me because my phone won't be here before then.
Click to expand...
Click to collapse

http://forum.xda-developers.com/showthread.php?p=63081722
The post shows a reply from the company saying those were pre release mock up images... They should update the images but as long as they don't really cover the LAF no biggie. Especially considering I got to order the case for $2!
Sent from my A0001 using XDA Free mobile app

I ended up getting this case, there has been confirmation that the LAF will not be blocked on the final version (source the manufacturer)
Nexus 6P Case, SUPCASE Google Nexus 6P Case Cover (2015 Release) Unicorn Beetle Series Premium **Slim** Hybrid Protective Case / Bumper (Frost/Black) https://www.amazon.com/dp/B015X90UJS/ref=cm_sw_r_other_awd_IyzdwbKVQ6MSY
Sent from my A0001 using Tapatalk

In the image attached to this post is the email I received back from the manufacture. As others have already posted their responses they got back also. Happy to know this case will work fully with the 6p and its laser focus.

I ordered a clear one that needs the opening trimmed (or sent back). I kind of like this one with red accents, looks like the opening is wide enough.
https://www.amazon.com/dp/B015ECPW0G/ref=cm_sw_r_other_awd_npAdwbDFEZS4R
Sent from my Nexus 5 using Tapatalk

Posted this in another thread here earlier today, but figured I'd put it here since it pertains to the Verus case render:
Just FYI. It looks like Verus has updated the render on their Amazon listing: http://www.amazon.com/gp/product/B015GHQGM2?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00.
So glad I picked this up for $2 a few days ago.

Got my clear case today: http://www.amazon.com/LK-Scratch-Re...443751243&sr=8-4&keywords=Nexus+6p+clear+case
Looks easy to make a template to cut an opening wide enough. It's crystal clear, may not effect IR anyway.
Edit: Manufactures just sent email. Said to toss what they shipped and will send replacement that doesn't block the laser focus in 2 weeks (before the 6P arrives).
Sent from my Nexus 5 using Tapatalk

fAndroid513 said:
I'll be waiting for the second batch of the device, because I want to see reviews, and to avoid any possible quality control issues that might initially exist. With this in mind, I obviously want to protect my investment, what with being a student on a budget. As such, I want to really protect my screen. In fact, just last week I shelled out an unplanned $120 to replace the screen on my S3 i9300, which fell face down in its ZeroLemon battery case. The screen wasn't cracked, but it was damaged in terms of the pixels. It started out with a purple spot, and got progressively worse overnight, to where it was totally black, and unusable. Does anyone know if a Ballistic, Trident, or UAG case will be made available for the 6P? Are there any other ideas as to the type of case I'm looking for, besides those I mentioned?
Thanks!
Click to expand...
Click to collapse
I emailed UAG already and are not planning on making a case for the 6P.
Sent from my XT1575 using Tapatalk

Anybody find any photos of the Nexus 6p wearing the official cases yet?
I ordered the carbon, would be nice to see how it looks on the device.

My clear case from Amazon. Should be a simple exacto fix once I know how wide to cut. I'm going to love the 6P, only slightly wider than my N5, and who cares how long it is (especially with superior speakers on front!).
https://www.dropbox.com/s/0hvt4ikkip3d7l8/6P-2027.jpg?dl=0
https://www.dropbox.com/s/3701w87lq24glk8/6P-2029.jpg?dl=0
Edit: Manufactures just sent email. Said to toss what they shipped and will send replacement that doesn't block the laser focus in 2 weeks (before the 6P arrives).

Case with a kick stand?

After using a case mate naked tough case on my nexus 6 I was looking at getting a case with a kick stand for media consumption and so far not seen any for the 6p. If anyone has seen one can you let me know. Iv ordered a cheap one for the time being to offer some protection but it is only meant as a temporary until I can find one I actually want and fits the bill for my needs
Sent from my Nexus 7 using Tapatalk

I've seen a few on Amazon with kickstands.
http://amzn.com/B015K7XRUM
http://amzn.com/B015X6FAE6
http://amzn.com/B014ZJKDEY
Do a deeper search than I did and I bet you'll find more. Most of these seem to be the extremely bulky case types, which don't interest me personally. One case I had for the Nexus 6 which had a kickstand but was also slim was the Seidio Surface case. http://www.seidioonline.com/motorola-nexus-6-surface-kickstand-case-garnet-red-p/csr3mtn6k-gr.htm You might want to contact them and see if they plan on making a N6P case. I'll vouch for Seidio - they make pretty good products. I've even deployed them with iPhones at work.

Thanks, none of those are on Amazon UK as far as I know but il keep looking
Sent from my Nexus 5 using Tapatalk

Elnrik said:
I've seen a few on Amazon with kickstands.
http://amzn.com/B015K7XRUM
http://amzn.com/B015X6FAE6
http://amzn.com/B014ZJKDEY
Do a deeper search than I did and I bet you'll find more. Most of these seem to be the extremely bulky case types, which don't interest me personally. One case I had for the Nexus 6 which had a kickstand but was also slim was the Seidio Surface case. http://www.seidioonline.com/motorola-nexus-6-surface-kickstand-case-garnet-red-p/csr3mtn6k-gr.htm You might want to contact them and see if they plan on making a N6P case. I'll vouch for Seidio - they make pretty good products. I've even deployed them with iPhones at work.
Click to expand...
Click to collapse
They are, I made a post about it a few days ago.
Sent from my VS985 4G using Tapatalk

I saw something recently about how a lot of the early cases are blocking important parts of the sensor/antenna bar (the black bar on the back of the phone). Does anyone know how much of the bar needs to be exposed to not impede functionality?
And to the OP, I've had a kickstand case with my last two phones, and last two tablets, and I just can't go back to a device without it now. So thanks for starting this thread.

sfreemanoh said:
I saw something recently about how a lot of the early cases are blocking important parts of the sensor/antenna bar (the black bar on the back of the phone). Does anyone know how much of the bar needs to be exposed to not impede functionality?
And to the OP, I've had a kickstand case with my last two phones, and last two tablets, and I just can't go back to a device without it now. So thanks for starting this thread.
Click to expand...
Click to collapse
I have found that many of these are preproduction images, so I wouldn't rely on the current pictures to show me anything more than a rough idea of what the final product will generally look like. Several product images have already changed on Amazon's site.
Wait until the middle / end of October for all the companies to get the products finalized. This forum already has several threads with replies from manufacturers saying designs aren't final. They are just trying to ensure they get their piece of the pie on early and preorder case dollars when they list products this early on Amazon.

Elnrik said:
I have found that many of these are preproduction images, so I wouldn't rely on the current pictures to show me anything more than a rough idea of what the final product will generally look like. Several product images have already changed on Amazon's site.
Wait until the middle / end of October for all the companies to get the products finalized. This forum already has several threads with replies from manufacturers saying designs aren't final. They are just trying to ensure they get their piece of the pie on early and preorder case dollars when they list products this early on Amazon.
Click to expand...
Click to collapse
Gotcha, thanks for the info.

Real interested in the i-Blason case since I'm looking for a hybrid case with a kickstand that gives me peace of mind without Nexus protect.
However I emailed them aobut the laser AF problem and got this:
Dear Customer
I cannot guarantee that will not block it. I have not information concerning this problem.
Thank you
CSR Team
Might try again in a few days...

Once Seidio releases their cases the Surface should have a kickstand. Using that case now on my S4 and love it.
Sent from my SPH-L720 using Tapatalk

Sigh... No news on these? I only see the the moko and caseformers..... Anything more fancy and slim as i don't think seidio is making one
Sent from my HTC One_M8 using Tapatalk

This one on amazon appears to be slim, and has a kickstand too:
http://www.amazon.com/Google-Nexus-...33&sr=1-1&keywords=nexus+6p+cases+caseformers
Based on the picture, the laser autofocus appears to not be blocked.

rajendra82 said:
This one on amazon appears to be slim, and has a kickstand too:
http://www.amazon.com/Google-Nexus-...33&sr=1-1&keywords=nexus+6p+cases+caseformers
Based on the picture, the laser autofocus appears to not be blocked.
Click to expand...
Click to collapse
Was thinking of it but looks very cheap
Plastic stand and i hate the silicon wrapped in Plastic.
I've seen nicer ones that are more costly by reputable companies but none for 6p
Bought a tpu for now from tudia.... Nice and slim but would like to have a spare with kickstand so I'll wait a bit more to see if anything comes up
Sent from my HTC One_M8 using Tapatalk

A case with a stand will be ultimately what I get.
As I am getting a silver phone rather than a black one, I would really love a crystal clear case with stand! Although I'm sure this will never happen.

If you guys are wondering the quality of the caseformers, I have one for my Note 5 and did a quick review on YouTube. See for yourself.
https://youtu.be/F9OtMs4ULqM

Thanks.... How is it when laying flat in a desk. Seems like there is a bulge.. Does it wobble at all?
Sent from my HTC One_M8 using Tapatalk

Spigen has a ring that attaches to any case (flat surface) that works as a kickstand and a grip helper for the phone. They also include a car mount with it. Here's the link

HolloWX said:
Spigen has a ring that attaches to any case (flat surface) that works as a kickstand and a grip helper for the phone. They also include a car mount with it. Here's the link
Click to expand...
Click to collapse
Great find! Thanks for the tip...
Also, Amazon has it cheaper, for $16, and one day delivery with Prime:
http://www.amazon.com/gp/aw/d/B015HSS4AM/

GuinnessX said:
Great find! Thanks for the tip...
Also, Amazon has it cheaper, for $16, and one day delivery with Prime:
http://www.amazon.com/gp/aw/d/B015HSS4AM/
Click to expand...
Click to collapse
Doesn't it make it wobble when flat? Looked cool initially but I think it's a bit weird to carry 24/7 on such a nice phone. And I doubt it last forever if constantly removing it.
Thanks anyway though

I haven't received it yet, but I know that I will be using it as a kickstand, so what's the relevance of "lying flat"? It looks like if you stick it above center, but still out of the way of the Imprint sensor, it should sit on a table/desk at a very convenient angle in either orientation...

GuinnessX said:
I haven't received it yet, but I know that I will be using it as a kickstand, so what's the relevance of "lying flat"? It looks like if you stick it above center, but still out of the way of the Imprint sensor, it should sit on a table/desk at a very convenient angle in either orientation...
Click to expand...
Click to collapse
I just sometimes lay it flat and don't always use a kickstand. I enjoy it when I need it but not all the time.
I'd prefer a thin case that has a kickstand if and when needed.... But each use phone differently
Sent from my HTC One_M8 using Tapatalk

Real wood case for Nexus 6P now available...

Hello!
Jen @ Cover-Up here. We've finally launched our real wood #WoodBack case for the 6P. It's available to pre-order as of today, and is due to ship from 25th January. We've combined a TPU and polycarbonate case with a hand-finished real wood panel, to give the look of real wood with added impact-resistant protection for your phone.
You can find the collection here: http://www.cover-up.com/collections/woodback-google-nexus-6p
Get 15% off your pre-order with "NEXUS6PXDA".
Any questions just shout!

Ordered the Cedar one myself. Anxiously awaiting it!

Ordered Carpathian elm burl. Thanks.

bill3508 said:
Ordered Carpathian elm burl. Thanks.
Click to expand...
Click to collapse
Same here.
What is not clear to me, or depicted as far as I can tell, is how the buttons are handled?

Judging by pictures it looks like the fingerprint cutout is quite narrow, and given the overall thickness of this case it looks like one will have to dive his finger deep into that hole in order to unlock the phone. Can you comment on this?
I would also like to see the buttons as this detail is missing on the pictures.
Other than that the cases look good.

Wow. Too cool! I'm gonna definitely have to get one of these soon. Thanks for the share op!
Sent from San Antonio Tx- Nexus 6p

A wooden and plastic case for the aluminum phone. Now there's a concept.
Sent from my Nexus 6P using Tapatalk

The case looks way too thick. I'm waiting for reviews. Carved.com looks slimmer
Sent from my Nexus 6P using Tapatalk

bench_strength said:
Same here.
What is not clear to me, or depicted as far as I can tell, is how the buttons are handled?
Click to expand...
Click to collapse
I've taken some quick pictures to give you more of an idea:
http://imgur.com/a/dPwzy
They're fully covered by the case's TPU edges for extra protection, but still easily pressed. I hope these pictures help, but just shout if not - I can always get our photographer to take some better ones in the studio for you.

Bogega said:
Judging by pictures it looks like the fingerprint cutout is quite narrow, and given the overall thickness of this case it looks like one will have to dive his finger deep into that hole in order to unlock the phone. Can you comment on this?
I would also like to see the buttons as this detail is missing on the pictures.
Other than that the cases look good.
Click to expand...
Click to collapse
We've tested the case thoroughly here and found no problems with the access to the finger print scanner. The sensor itself seems to be so efficient that when holding the phone in front of you the tip of the index finger is more than sufficient to unlock it, and we've found this just as easy to do with the case on as without the case.
As per my previous post, you can see some extra pictures of the buttons here:
http://imgur.com/a/dPwzy

Very nice indeed.

JenCover-Up said:
I've taken some quick pictures to give you more of an idea:
http://imgur.com/a/dPwzy
They're fully covered by the case's TPU edges for extra protection, but still easily pressed. I hope these pictures help, but just shout if not - I can always get our photographer to take some better ones in the studio for you.
Click to expand...
Click to collapse
Thanks, I can discern the buttons. Maybe one of the "multi angle" shots should include this?
thanks

bench_strength said:
Thanks, I can discern the buttons. Maybe one of the "multi angle" shots should include this?
thanks
Click to expand...
Click to collapse
Working on it as we speak @bench_strength Will let you know as soon as the new photos are up on our website.

If you could please post more photos in the hand like you had of the front and back and sides please. Anyway possible to include nexus engraving by custom request? Other companies offer this without posting on their website to go around copyright issues
Sent from my Nexus 6P using Tapatalk

Ordered a cedar case, and excited to receive it! Don't see many people with wood phone cases out on the street, so I'm glad that you've developed something for this phone.
Like @nexicon I, too, would have liked to have had the Nexus logo engraved by custom request. Toastmade, dbrand, and Slickwraps all offer this option (Toast by custom request) so I'm curious as to whether there's some especially obnoxious, UK-specific law preventing that?

LuckyDragan said:
Ordered a cedar case, and excited to receive it! Don't see many people with wood phone cases out on the street, so I'm glad that you've developed something for this phone.
Like @nexicon I, too, would have liked to have had the Nexus logo engraved by custom request. Toastmade, dbrand, and Slickwraps all offer this option (Toast by custom request) so I'm curious as to whether there's some especially obnoxious, UK-specific law preventing that?
Click to expand...
Click to collapse
Unfortunately whilst we can't speak for other companies, engraving the Nexus logo onto the case without Google's permission would be enough to constitute an infringement of Google's Nexus trademark and so (for the time being at least) it's not something that we're able to offer, even by custom request.

nexicon said:
The case looks way too thick. I'm waiting for reviews. Carved.com looks slimmer
Sent from my Nexus 6P using Tapatalk
Click to expand...
Click to collapse
If you e-mail Carved customer support, you'll hear from them that they have no plans to make a case for the Nexus 6P.
Furthermore, both Carved and Cover-Up have two different versions of their cases: the Slim/Snap series (respectively) and the Traveler/Explorer series (respectively). If you compare the products (for their iPhone 6 lineup) they're literally identical (even down to the design of the rubber surrounding the wood back; I wouldn't even be surprised if they sourced the exact same components and materials). The former happens to be more minimalistic, while the latter offers more protection.
At least Cover-Up decided on making a case for the N6P; they're just only offering it in the Explorer version, since it's more versatile. Personally, I'm glad for this decision because the Slim/Snap series leave the top and bottom edges exposed, meaning less coverage against scratches and drops.

Ya thanks to know
Sent from my Nexus 6P using Tapatalk

Our #WoodBack cases for 6P are now ready! All pre-orders will ship later on today.
I have uploaded a very quick video of the case here. Please excuse the poor quality of the video, I hope to get our in-house photographer to create something a little better later this week but wanted to give you a sneak peek.
I've also added some extra photos. (This particular case is Bamboo.)
As ever, any questions just shout .

The link you provided directs to an old video of the iPhone 6 and galaxy S6.
The case seems to be as thick as the thickest part of the phone, I guess it's not possible to shape the wood to adhere the the phone's shape?
Is there a gap below the camera where the phone is thinner?