I want to root my tablet, but ı couldn't.
android version:4.2.2
CPU ABI : x86
CPU ABI2 : armeabi-v7a
Related
Hi,
I've got problem with building Android kernel modules. I'm using GoClever A73 with Android ICS (4.0.3, kernel 3.0.8) for Eken T02 (both are Allwinner A10 based). I'm trying to compile modules for this kernel. Module I've found in Android has following modinfo:
Code:
filename: /home/sid/usbnet.ko
license: GPL
description: USB network driver framework
author: David Brownell
depends:
vermagic: 3.0.8+ preempt mod_unload modversions ARMv7
parm: msg_level:Override default message level (int)
And file:
Code:
/home/sid/usbnet.ko: ELF 32-bit LSB relocatable, ARM, version 1 (SYSV), not stripped
I'm using sources from github: madprogrammer/linux-aurora . I want to build for example usbserial.ko and pl2303.ko. I've built module with modinfo:
Code:
filename: drivers/usb/serial/usbserial.ko
license: GPL
description: USB Serial Driver core
author: Greg Kroah-Hartman, [email protected],
depends:
vermagic: 3.0.8+ preempt mod_unload modversions ARMv7
parm: vendor:User specified USB idVendor (ushort)
parm: product:User specified USB idProduct (ushort)
parm: debug:Debug enabled or not (bool)
Code:
drivers/usb/serial/usbserial.ko: ELF 32-bit LSB relocatable, ARM, version 1 (SYSV), not stripped
But when I'm trying to insmod module I've got Exec format error. There is a line:
Code:
usbserial: no symbol version for module_layout
strace says:
Code:
(...)
init_module(" ELF", 0xb634) = -1 ENOEXEC (Exec format error)
(...)
I'm think that there are some config values set in wrong way but haven't idea which.
There is .config in attachement. (Unfortunetely kernel running on Android doesn't provide config through /proc).
Have You got any idea where I made mistake?
Thanks
sorry buddy, I have no answer for you, but if you manage to build kernel, please post it here... thanks!
There is an SlateDroid post that might help you out.
I still can't post outside links, so ...
www dot slatedroid dot com
+
/topic/27852-generic-usb-serial-gps-hal-driver/page__view__findpost__p__344837
Regards,
Rodrigo
Can anyone copy files or compile for bluetooth usb adapter for Chinese Tablet and serial fdti?
I try too install two file but i have problem:
- one have wrong vermagic "vermagic=3.0.8+ SMP preempt mod_unload ARMv7"
- second one "Exec format error" disagrees about version of symbol module_layout
My tablet have:
- Android 4.0.3 (kernel 3.0.8)
- CPU ARMv7 rev2 (v7l)
- Hardware sun5i
- vermagic=3.0.8 preempt mod_unload modversions ARMv7
I think Allwinner A10 have the same configuration.
Hello Developers
will someone please compile "adb 1.0.31" binary for ARMv7 processor rev 2 (v7l)
I followed this guide (adb 1.0.31 for ARM devices) http://forum.xda-developers.com/showthread.php?t=2586472
And got an error
# Segmentation fault
Any help is going to be appreciated.
Platform: LG Qualcomm
Selected port: COM18
Selected model: D820
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba ([email protected]) (gcc version 4.7 (GCC) ) #3
SMP PREEMPT Tue Nov 26 12:04:50 CST 201
Android version: 4.4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Performed by 2.4.6 Software version.
--------------------------------------------------------------------------------
Checking data...OK
Platform: LG Qualcomm
Selected port: COM18
Selected model: D820
Reading info...
Initializing ADB...OK
Waiting for phone...OK
Model ID: Nexus 5
Firmware version:
Kernel version: 3.4.0-g9eb14ba ([email protected]) (gcc version 4.7 (GCC) ) #3
SMP PREEMPT Tue Nov 26 12:04:50 CST 201
Android version: 4.4.4
Hardware: Qualcomm MSM 8974 HAMMERHEAD (Flattened Device Tree)
ARMv7 Processor rev 0 (v7l)
Switching to Fastboot mode...OK
Unlocking Bootloader...
Bootloader is unlocked.
Writing Bootloader...OK
Please, wait while the phone will turn on and press "Ok" button.
Trying to enable Diagnostics ports...
Initializing ADB...OK
Waiting for phone...OK
Checking root access...
Phone is already rooted.
Diagnostics ports are enbled!
Switching to Serial Port...
Failed!
Performed by 2.4.6 Software version.
Any Solution ?
I'm not sure what the problem would be since the software and box should force flash the phone, assuming the phone is not physically damaged.
I have been repaired, But what is the Solution Of " Mobile network Not Available ' And ' No Signal " ?
Was the phone dropped? Possible loose internal connection? Phone is showing the correct imei?
Yes It's Have A Correct Imei , I'm not dropped the phone ...
is The problem Of Hardware ?
I bought this phone from China. It came with chinese rom 4.4.4 without google services and root.
At the moment I've tried to root it with no luck (all known ways don't work). The bootloader is locked and, therefore no custom roms can be flashed.
There is no "OEM unlocking" menu in debug mode and it doesn't appear after software update request and changing time to +7 days.
I've digged out some information, and the phone turned out to be a clone of G360F (at least I see no difference):
Device Model: SM-G3608
Bootloader: G3608ZMU1AQA2
RAM: 768 MB
Board: MSM8916
Toolchain: GCC 4.7
Runtime Dalivk: 1.6.0
Chipset: QUALCOMM TECHNOLOGIES, INC MSM 8916
SDK Version: 19
Kernel: Linux 3.10.28
CPU Chipset: Qualcomm Snapdragon 410, 28nm LP
Processor Rev: 0 (v71)
Processor Design: Cortex A53
Processor Architecture: ARMV7L
CPU Cores: 4x1190MHz
CPU ABI: ARMEABI-V7A
CPU ABI2: ARMEABI
CPU Revicion: r0p0
CPU implementation: 0x41
Display Resolution: 480x800 TFT
Pixel Density: 210X/210Y ppi
Aspect Ratio: 1.675:1
Refresh Rate: 60 Hz
Orientation: Portrait
Graphics: Qualcomm Adreno (TM) 306
Grpahics API: OpenGL ES 3.0 [email protected] [email protected] ([email protected])
Texture Units: 16
Usable RAM: 630 MB
SD Card 0: 2.28 GB
So I tried to flash the TWRP:
twrp-2.8.7.1-coreprimelte.img.tar and twrp-3.2.2-0-coreprimelte.img.tar
dl.twrp.me/coreprimelte/
github.com/TeamWin/android_device_samsung_coreprimelte
But the phone refuses to run in recovery. It seems that some offsets are different.
I need your help to rebuild twrp-coreprimelte with new parameters or help me to make a correct build config.
All the data for the phone:
Code:
settings.cfg: yadi.sk/d/NV7UF8wK3Zy6Ka
boot_ramdisk.zip: yadi.sk/d/c5xwH9jE3Zy5qo
recovery_ramdisk.zip: yadi.sk/d/SkQPPU653Zy5tV
recovery.img.7z: yadi.sk/d/5AOXxtbV3Zy5zC
build.prop: yadi.sk/d/1QU6Uvf_3Zy6Du
PIT_Analysis_001.txt: yadi.sk/i/2z77_B7a3Zy6FV
ROSSALTE_CHN_CMCC.pit: yadi.sk/d/rBF0t8dm3Zy6Ja
dt.img: yadi.sk/d/mweD5DWT3ZyHNi
recovery.img-zImage: yadi.sk/d/oPkaNM3a3ZyJJY
Here is what (in my opinion) should be changed:
1) BoardConfig.mk
user_debug=23 -> user_debug=31 ?
2) dt.img
replace dt.img
3) kernel
replace kernel -> recovery.img-zImage ?
4) recovery.fstab
recovery_ramdisc\ramdisc\etc\recovery.fstab
no system_image
no data
no misc
efs (efs1) -> ext4 ?
no efs2
external_sd (mmcblk1p1)
other partitions form fstab.qcom ?
Is it correct?, and I'm still confused ,recovery.fstab it's completely different from original recovery.fstab and fstab.qcom