Database Info

[ROM][5.1][x2xtreme] Allview's Stock Modified (soon prerooted, w/ Xposed)

Allview's Stock Modified ROM for Allview X2 Soul Xtreme
So far we haven't got any working custom ROM so I've managed to make flashable zip package of stock ROM for Allview X2 Soul Xtreme. You are able to flash it via TWRP recovery.​
FEATURES (actual):
Every stock ROM's feature
BemDev's Kernel
FEATURES (coming soon):
Prerooted
Debloated
Custom bootanimation
With Xposed Modules
With MODs you want me to add in this ROM
Code:
Warning
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* [B]bemolx[/B]
*/
COMPATIBILITY:
Tested on Allview X2 Soul Xtreme. May work on other devices.
DOWNLOADS:
Google Drive (1.4GB)
HOW TO INSTALL:
Make a backup
Perform factory reset
Flash zip (can take a while)
Wpie /data
Reboot and enjoy
Thanks
XDA:DevDB Information
Allview's stock modified, ROM for the Blu Pure XL
Contributors
bemolx
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP Recovery
Based On: Stock
Version Information
Status: Stable
Created 2016-04-26
Last Updated 2016-04-26

Reserved

Think this will flash to the BLU PureXl? Im doing nandroid now so I can check

tbirdguy said:
Think this will flash to the BLU PureXl? Im doing nandroid now so I can check
Click to expand...
Click to collapse
It is possible to do so because when we flash for example Gionee's ROM via SPFT on one of our devices it will work and this is just an easier method. Hope it boots on your Pure XL

I'll try this later
Sent from my E8 using XDA-Developers mobile app

Gracias!!!! descargando

Sorry if this is a stupid question, but when you say "stock" do we mean unmodded android? Or is this just the rom for the Allview with no alterations on your part exempting compatibility?

TheLastCanadian said:
Sorry if this is a stupid question, but when you say "stock" do we mean unmodded android? Or is this just the rom for the Allview with no alterations on your part exempting compatibility?
Click to expand...
Click to collapse
If you think about Google's pure Android as a 'stock ROM' you are wrong. Stock ROM is a ROM released (or unreleased in our case) by specific OEM. This is ROM from X2 Xtreme by Allview. So... I think you have the answear now. Any other info is mentioned in the main post.
Cheers,
bemolx

Sorry, what build version is this Rom?
Thanks for your help and support! [emoji4]
Enviado desde mi PURE XL mediante Tapatalk

no tengo LTE solo 4g

I just installed on my Blu pure xl. Everything is working fine but calls. I can't make calls or receive them.
Edit: I just reflashed the rom and now calling works.

i dont have lte only show 4g
how i fix?

gionfj said:
i dont have lte only show 4g
how i fix?
Click to expand...
Click to collapse
From what I know 4G equals LTE. In this stock ROM you won't be able to change it into 'LTE', maybe with some Xposed Modules but I don't know if they'd work with this ROM.
Sent from Nexus 5

does this rom works on blu life pure xl L260L ?

leboreiro said:
does this rom works on blu life pure xl L260L ?
Click to expand...
Click to collapse
BLU Life Pure XL isn't the same device as BLU Pure XL.

Hi Bemolx
First - Tnx for Your job.
I install Your ROM, via TWRP 274, make wipes etc.
After reboot, i notice two problems:
1. Internal memory sims to be read only - same problem as => http://forum.xda-developers.com/pure-xl/help/allview-x2-xtreme-memories-fixed-t3476414
2. PlayStore dont work properly (i repair it with two appk from site Allview), now work OK, but i have often PlayeStore error (without other issues).

resolved problems
Hi All
Problem with read only internal memory -> factory reset, reflash old TWRP backuo - dont remove problem.
After some research i reflash with SPFlash Tool oryginal Allview ROM., (without reflashing recovery.img (i love TWRP ).
Now, all work very fine

you can solve internal memory read only by this command :
Fixed with terminal command in TWRP by comand:
chown -R media_rw:media_rw /data/media/
find /data/media/ -type d -exec chmod 775 {} ';'
find /data/media/ -type f -exec chmod 664 {} ';'

Any ideea how to disable the USB charge power limit on this phone (kernel).My USB has sufficient power to charge at 2A (tested with Samsung phone) but on this phone it only works when a chop off the data pins on the USB (

CIURI2786 said:
Any ideea how to disable the USB charge power limit on this phone (kernel).My USB has sufficient power to charge at 2A (tested with Samsung phone) but on this phone it only works when a chop off the data pins on the USB (
Click to expand...
Click to collapse
I know on PC it offers the option to select charge.
My suggestion as a simpler option would be to buy a microusb off eBay and I'm sure for $1 you can afford to vandalize it.

AOSP 7.0 Nougat for Z5 Premium DUAL

--AOSP for Xperia Z5 Premium DUAL--
Should be compatible with all Z5 Premium DUAL variants!​
Things you should know before using:
If you would like to use Android Pay, you will need to lock your bootloader since the SafetyNet API checks for an unlocked bootloader.
Features:
- Split Screen
- System UI tuner with Notification Importance
- Default App selecting that includes which voice command app you want to use as default (Google Now, Cortana, Hound, etc.)
- Extended Settings
- Toggle 8MP and 23MP mode for rear facing camera (requires reboot)
- ADB over network toggle​
I am not responsible if your phone bricks, catches fire, or explodes. You are flashing this ROM at your own risk!
-Before you flash ANY of the images, you must make sure your device is unlocked through Sony's unlock boot loader service!!
Current Bugs:
1. The rear camera doesn't always work and the orientation is wrong for the front facing camera.
2. The Fingerprint sensor doesn't work.
3. No SD Card support
4. SIM card isn't read on new updated kernel.
---------------------------------------------------------------------------------------​
How to Install the ROM:
1. Download the AOSP images: https://drive.google.com/open?id=0B6sxb_DTSRXuRjVPd2NneTFUWEE
2. Flash AOSP image to your device:
1. On your device: Connect the device to your computer in Fastboot mode, by pressing volume up while inserting the USB cable. When the device is in Fastboot mode, the LED on the device will be illuminated in blue.
2. On your computer: Go to where you downloaded the files and open a cmd screen. Then, flash the boot, system and userdata images by entering the following commands in a terminal window:
Code:
fastboot -S 256M flash boot boot.img
fastboot -S 256M flash system system.img
fastboot -S 256M flash userdata userdata.img
Note: It's not necessary to re-flash the userdata every time you flash your device, but sometimes the new software is incompatible with previous content, which might result in a device that doesn't boot. If you experience this, try to re-flash only the userdata again.
3. Disconnect your device from the computer and power it on.
First boot may take a while so please be patient!
Congrats!! You now have AOSP on your Z5 Premium Dual!
---------------------------------------------------------------------------------------​
Installing GApps:
Download which GApps you would like to use (recommended GApps are the OCT 31st GApps from OpenGApps). You can either download the zip onto your phone, or if you forget to do that - like me - then download the zip onto your computer.
Download the TWRP boot.img for Z5 Premium Dual: E6883.img (I recommend you download this where you saved the other img files you downloaded earlier!)
Plug your Phone into your PC in fastboot mode.
Open a cmd screen where you downloaded the recovery img and run this code:
Code:
fastboot flash boot E6883.img
Once that's done, unplug your phone and boot into recovery. If it asks about the system being mounted as read-only click the button that keeps the system as READ-ONLY as this doesn't affect flashable zip files.
If you downloaded your GApps zip onto your phone:
Click install zip and navigate to where you saved it and install the zip.
If you downloaded your GApps zip onto your PC:
On TWRP go to Advanced -> ADB Sideload.
On your PC go to where you downloaded the zip file and open a cmd window.
Once you do that you can run this command on your computer:
Code:
adb sideload <your GApps.zip file>
Wait until the install is finished before unplugging your phone!!
Once the installation is finished press the back button
Go to Reboot -> Bootloader
Once your phone reboots into bootloader mode, flash the boot.img that you downloaded at the start with:
Code:
fastboot flash boot boot.img
YOUR PHONE WON'T REBOOT TO THE SYSTEM IF YOU DON'T DO THIS STEP!
When the flash is finished, unplug your phone and reboot it.
Congrats!! You now have GApps installed!
XDA:DevDB Information
Z5 Premium DUAL AOSP 7.0 Nougat, ROM for the Sony Xperia Z5 Premium
Contributors
Archfeind2, Sony Developer World Mobile
Source Code: https://github.com/ZeroX25/Z5_Premium_Dual_AOSP
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Unlocked Bootloader
Based On: AOSP
Version Information
Status: Beta
Current Stable Version: 0.5.0
Stable Release Date: 2016-11-30
Current Beta Version: 0.6.0
Beta Release Date: 2016-12-30
Created 2016-11-16
Last Updated 2017-04-10

Bug Reporting
If you find a bug or like to help out in debugging the OS:
Check to see if the bug report is already reported under the "Bug Report" Section. If it isn't then:
- Enable developer options
- Select "Bug report shortcut"
- Press and hold the power button until the Power Menu shows up
- Select "Take Bug Report"
This will make a bug report that you can share. I suggest you share it to your email, download it onto your desktop.
Go to the "Bug Reports" Section and fill in the information required including:
What phone you're using
What build you're on
And what steps you took that created the bug so that it can be recreated.

Build 0.6.0 Changelog: (Coming Soon)
Built on AOSP 7.0 r24!
Reverted change rx8 digital audio back to 84 (was 87)
Lowered screen brightness level from 10 to 5
Removed newlabs ringtones
Camera button can now take pictures! Use power button to call upon camera.
Colors are fixed in camera; front-facing camera still rotated on 90 deg in ui
Older Version(s):
Build 0.5.0 Changelog:
Built on AOSP 7.0 r21!
Discarded some outdated ringtones, notification sounds and alarms for new (and hidden) material sounds
No need to set DPI before build. 7.0 Nougat has default support for dpi changing!
- Settings: Display for small, medium or large
OR
- Settings: Developer Options -> Drawing -> Smallest Width for a custom DPI setting!
BOOT.IMG ISSUE FIXED! boot.img needs to come from r17 only!
Increased thermal throttle threshold in device/sony/satsuki/rootdir/system/thermanager.xml by 5 deg C
Enabled KSM in:
-kernel/msm/arch/arm64/config/aosp_kitakami_satsuki_dsds_defconfig
-device/sony/kitakami/rootdir/init.kitakami.rc
Build 0.4.0 Changelog:
-Now based on AOSP 7.0 r19 (NBD91P)!
Build 0.3.1 Changelog:
-Changed BUILD_VARIANT from userdebug to user
-Changed selinux from permissive to enforcing
Build 0.3.0 Changelog:
-Changed DPI to 440 so 5 apps can be horizontal on the homescreen instead of 4 (original DPI was 480)
-Changed Speaker mixer ceiling from 84 to 90 (this should help with the maximum speaker volume)

will have a try if sd card bug fix lol

pandan80 said:
will have a try if sd card bug fix lol
Click to expand...
Click to collapse
Sound's good :good:
The xperiadev website was using an old revision of 7.0 (r17) so I'm updating the ROM now to the newest revision (r21) to see if that helps alleviate any bugs.

after flash phone blank only is normal?my devices is E6883

pandan80 said:
after flash phone blank only is normal?my devices is E6883
Click to expand...
Click to collapse
Can you re-word this please? What did you flash and did you go into the settings to disable auto brightness? You must flash boot.img, userdata.img and system.img if you are flashing for the first time.
EDIT:
I've uploaded the working boot.img file so this should fix the issue. Just run this command in the folder you downloaded it to:
Code:
fastboot flash -S 256M boot boot.img

Follow the command and flash....but on vibration only...sorry for my bad english

pandan80 said:
Follow the command and flash....but on vibration only...sorry for my bad english
Click to expand...
Click to collapse
So you're not getting any sound?
Can you tell me which files you flashed as well?
Edit:
It could be something to do with the kernel. Since we're using the first boot.img that I created (all future boot.img files didn't boot the phone up past the black screen; will have to do more testing) I can upload the new boot.img later today to see if that fixes the issue.

0.4.0 on my userexperience
wifi ok.....no reset and random
bluetooth ok....no reset and random
camera crash...only can open went boot...video record only working on 720p...no 4k option
no sd card support
ringing vibrate dual speaker ok
dual sim dual stanby ok
Fingerprint sensor doesn't work
quick charge 2.0 is working

thanks for the update :good:
I'm trying to figure out why the new boot.img files keep failing. Even starting from scratch doesn't seem to remedy the issue. For now we'll have to use the first boot.img that I uploaded so no big updates until that gets fixed.

Build 0.5.0 is uploaded! Check out the changelog for details!
When updating:
Download new images
Fastboot flash new boot.img and system.img
If you want to flash GApps do that now with the directions above
NOTE: TWRP can flash boot images, if you save the boot image to your storage, you can flash the image in TWRP.

it possible flash on single sim ? or so dangerous ? thank's you very much

xrenoix said:
it possible flash on single sim ? or so dangerous ? thank's you very much
Click to expand...
Click to collapse
DON'T flash on single sim! If you would like to have nougat there is a thread for the Z5 Premium already made or you can build it yourself by heading over to the Sony developer world mobile website and follow the nougat 7.x.x build guide.

Sony now supports the new r_24 update to Nougat 7.0.0 so I will be updating the ROM soon!
NEW UPDATE IS UPLOADED! Let me know if you run into any issues!

Hi there
Could I follow this tutorial for flashing my e6833?
In advance, thank you very much
Sent from my E6833 using Tapatalk

br0nka said:
Hi there
Could I follow this tutorial for flashing my e6833?
In advance, thank you very much
Sent from my E6833 using Tapatalk
Click to expand...
Click to collapse
If you're flashing this ROM then you should be able to. The ROM is discontinued unfortunately because my phone broke a while back

[ROM][7.1.2][FINAL] CodeOfHonor's OmniROM 7.1 for Huawei P8 Lite 2017

OmniROM is our Android custom ROM variant, feature-packed but always with stability as #1 priority in mind.
Based on the Android Open Source Project (AOSP) and enriched by our developers with lots of custom enhancements, OmniROM has set out to give you a great Android experience on your mobile.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]P8 Lite 2017.
[*]P9 Lite 2017.
[*]P10 Lite.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP, flash my latest build to avoid error 7 from here.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
tell me.
Downloads:
Code:
[B][I]**21/05/2018**[/I][/B]
[LIST]
[*][URL="https://www.haky86.com/2018/05/21/omnirom-nougat-hi6250/"]From Haky's Blog[/URL]
[/LIST]
Changelogs:
Code:
[B][I]**21/05/2018**[/I][/B]
[LIST]
[*]re-works
[/LIST]
Source Code:
Device Tree:
https://github.com/hak86/android_device_huawei_hi6250
Kernel GPL:
https://github.com/hak86/android_kernel_huawei_prague
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
OmniROM for PRA-LX1, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, Meticulus
Source Code: https://github.com/hak86?tab=repositories
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 5.x "C432B161"
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-01-17
Created 2018-01-17
Last Updated 2018-01-17

ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

*reserved v2*

Download Link is not working
Edit: There is a " in the end of the link that shouldn't be there.. Maybe you should edit the link

Zillinda said:
Download Link is not working
Edit: There is a " in the end of the link that shouldn't be there.. Maybe you should edit the link
Click to expand...
Click to collapse
fixed

I have a totally weird issue on this ROM. I don't have this issue on any of your ROMs except this one.
When i use your vendor my SIM Card is not detected (even if i disable Dual Sim and reboot)
But the weird thing is, when i flash my stock vendor from P10 Lite the Sim is working BUT the sound is not working.
I flashed this one like every ROM from you, and every ROM worked but not this one :/
Are you using the latest Code of Meticulus? Because i had this issues with earlier builds of Meticulus' ROMs
Except that everything works fine. I will go back to your fully working SlimROM until you release AOSPExtended.

Zillinda said:
I have a totally weird issue on this ROM. I don't have this issue on any of your ROMs except this one.
When i use your vendor my SIM Card is not detected (even if i disable Dual Sim and reboot)
But the weird thing is, when i flash my stock vendor from P10 Lite the Sim is working BUT the sound is not working.
I flashed this one like every ROM from you, and every ROM worked but not this one :/
Are you using the latest Code of Meticulus? Because i had this issues with earlier builds of Meticulus' ROMs
Except that everything works fine. I will go back to your fully working SlimROM until you release AOSPExtended.
Click to expand...
Click to collapse
In your case you must edit the /vendor/phone.prop file
* search for [0X3B412000]
* and make sure to set the following string.
persist.radio.multisim.config=single
persist.dsds.enabled=false
* save and reboot.
you get this problem because my vendor.img is designed to run with single sim devices only.
AOSPE will be available after AOSPA Paranoid, isn't available on any hi6250 device as I see.
Edit: remove persist.radio.multisim.config=single, save and reboot.

haky 86 said:
In your case you must edit the /vendor/phone.prop file
* search for [0X3B412000]
* and make sure to set the following string.
persist.radio.multisim.config=single
persist.dsds.enabled=false
* save and reboot.
you get this problem because my vendor.img is designed to run with single sim devices only.
AOSPE will be available after AOSPA Paranoid, isn't available on any hi6250 device as I see.
Edit: remove persist.radio.multisim.config=single, save and reboot.
Click to expand...
Click to collapse
Thanks, i will try it now.
But why don't i have this issue with your other ROMs?

Zillinda said:
Thanks, i will try it now.
But why don't i have this issue with your other ROMs?
Click to expand...
Click to collapse
it's releated to vendor.img partition since it's designed to run on single sim.. just fix the flags I wrote and will get fixed.
a thing you should do manually on dual sim phones.

haky 86 said:
it's releated to vendor.img partition since it's designed to run on single sim.. just fix the flags I wrote and will get fixed.
a thing you should do manually on dual sim phones.
Click to expand...
Click to collapse
I get error, that it's Read-Only File system and if i want to change the permission of the file with Root Browser it says Changing permissions was not successful. Both the Editor and the Root Browser have root permissions.
Edit: i see the file is symlinked to /hwvendor/phone.prop so i edited it inside there but it's still not working

Zillinda said:
I get error, that it's Read-Only File system and if i want to change the permission of the file with Root Browser it says Changing permissions was not successful. Both the Editor and the Root Browser have root permissions.
Edit: i see the file is symlinked to /hwvendor/phone.prop so i edited it inside there but it's still not working
Click to expand...
Click to collapse
set via adb shell and tell us if fixed
setprop persist.radio.multisim.config single
setprop persist.dsds.enabled false

haky 86 said:
set via adb shell and tell us if fixed
setprop persist.radio.multisim.config single
setprop persist.dsds.enabled false
Click to expand...
Click to collapse
nope, i don't know if i am too stupid or if it's really not working, but none of this methodes is working.

Zillinda said:
nope, i don't know if i am too stupid or if it's really not working, but none of this methodes is working.
Click to expand...
Click to collapse
well, as you see it's working for me in screenshots.

I finally got it working by replacing the /hwvendor/phone.prop file from my STOCK vendor into the vendor of @haky 86.

@haky 86
Intalled the C432B161 firmware, then proceed to flash this rom with your instructions, everything works except video recording on camera, also for whatsapp, facebook, messenger, etc
Any hints ? Maybe I missed something

rubentkato77 said:
@haky 86
Intalled the C432B161 firmware, then proceed to flash this rom with your instructions, everything works except video recording on camera, also for whatsapp, facebook, messenger, etc
Any hints ? Maybe I missed something
Click to expand...
Click to collapse
Enable Google H264 in Settings -> Extra
Sent from my hi6250 using XDA Labs

Zillinda said:
Enable Google H264 in Settings -> Extra
Sent from my hi6250 using XDA Labs
Click to expand...
Click to collapse
Already did that and reboot the phone, but the problem persist.
[/ATTACH]

rubentkato77 said:
Already did that and reboot the phone, but the problem persist.
[/ATTACH]
Click to expand...
Click to collapse
what is your device?also did you flash my vendor partition?

haky 86 said:
what is your device?also did you flash my vendor partition?
Click to expand...
Click to collapse
I bought it as P9 Lite 2017 PRA-LX3C69B110 branded from Telcel Mexico, then converted PRA-LX1C432B110 dual sim unbranded and got updated to B170.
Then unlock bootloader, instal your latest TWRP, follow your unbrick guide fro C432B161.
Then flash omni ROM + pico gapps.
In some point I didn flash your vendor img (how did I miss that !#@$!) do I needto flash it again before omni rom or after?
Regards. :good:

rubentkato77 said:
I bought it as P9 Lite 2017 PRA-LX3C69B110 branded from Telcel Mexico, then converted PRA-LX1C432B110 dual sim unbranded and got updated to B170.
Then unlock bootloader, instal your latest TWRP, follow your unbrick guide fro C432B161.
Then flash omni ROM + pico gapps.
In some point I didn flash your vendor img (how did I miss that !#@$!) do I needto flash it again before omni rom or after?
Regards. :good:
Click to expand...
Click to collapse
well yes, you have to flash my own vendor from unbrick guide!
but before doing that pull /vendor/phone.prop from converted firmware and paste into system/vendor/ to avoid sim problems.
as you see my screenshot the camera is fully works without enable google codecs.

[ROM][7.1.2][12/05/2018] CodeOfHonor's AOSPA Paranoid v7.3.1 for Huawei P8 Lite 2017

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, Meticulus
Source Code: https://github.com/hak86/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-02-09
Created 2018-02-09
Last Updated 2018-02-08

ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

Thank you for your awesome work! AOSPA is my fking favorite ROM.

NetfariousIntent said:
Thank you for your awesome work! AOSPA is my fking favorite ROM.
Click to expand...
Click to collapse
glad to hear that
I'll post in p9 lite and honor 6x sections later
here a screenshot of my friend that run on his p10lite and have almost 19%..

it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all

karasoulas said:
it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all
Click to expand...
Click to collapse
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP

haky 86 said:
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
Click to expand...
Click to collapse
yup. works. i dont know why man. but the stock rom is faaaaar faster than ur roms. Not trying to be rude i love ur work but i dont know. maybe iim doing something wrong?

** Note **
**11/02/2018**
pa_hi6250-7.3.1-EOL-20180210.zip
Changelogs:
**11/02/2018**
possible fix for ril crashes

Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?

atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated

sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/

atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
NetfariousIntent said:
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/
Click to expand...
Click to collapse
I use pico, always.

Sim keep disconnecting itself

It gives error while saving the finger print, both in this and the slim rom

atsmurat said:
It gives error while saving the finger print, both in this and the slim rom
Click to expand...
Click to collapse
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back

CarlosAG10 said:
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back
Click to expand...
Click to collapse
İ didnt erase fingerprints in Omni ROM . From that ?
Where is Elite Rom ?

haky 86 said:
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
I use pico, always.
Click to expand...
Click to collapse
Noto solve the SIM from disconnecting itself

Wire1122 said:
Noto solve the SIM from disconnecting itself
Click to expand...
Click to collapse
I will do a test-build post dinner, I fix the problems around here a few weeks ago on some roms!

Have You found the bug? I really want use your rom for Daily use.

** Note **
**13/02/2018**
pa_hi6250-7.3.1-EOL-20180213.zip
**13/02/2018**
Fix RIL crashes.
How to fix RIL Crashes?
Follow this post

New [ROM][PORT][Oreo]MIUI 10 for Mi A1 [8.1]

MIUI X Mi5 X ROM
This one isn´t my Rom i only provide this ROM to You from this Autor
Igor​Original 4PDA Version / Thread
You can find out more and talk each other over the Telegram Chat: https://t.me/MiuiMIA1tissot
Also there wil be postet new Rom version´s.
Code:
include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
If you like to report errors use https://github.com/berlinux2016/MIUI10
All Rom Downloads are here availble: Androidfile Host (Right side).
The most up to date is the onelike these example: 9=Year 3= Month 1= Day
Also this one is Weekly Beta Version: xiaomi.eu_multi_MI A1_9.3.1_v10-8.1.zip
and this are Stable signed version > "MiRoom" < : Mi A1_MIUI_9.2.28_MiRoom_8.1.zip
Instructions how to Install if you are still on Android 8
- Wipe Data / System / Art / Dalvik
- Flash Rom
- If necessary, we flash the userdata
- Reboot, give time for initial setup We have patience, the setup takes about 15-25 minutes.
- After initial setup, restart again. it may seem that the system is terribly slow
Enjoying!
If system does not boot after 25 minutes:
Fastboot flash userdata with command
Code:
Code:
fastboot flash userdata userdata.img
Userdata Download
Reboot to recovery
Flash MIUI ROM
For Update:
- install the update without Wipe
-Reboot into Recovery and flash Rom
- after that set the Camera Fix you find them with Magisk Online "Mi A1 Camera Fix Lag Fix Oero" Once Downloaded/ Installed there you can use them next time with manual mode in Downloads folder.
For the one who are using the new Android 9 and need to downgrade need to use this tutorial for Downgrade without loosing the Imei:
https://forum.xda-developers.com/mi-a1/how-to/tutorial-downgrade-9-0-to-8-1-edl-imei-t3879624
Download of all files included the Downgrade files (about 3.2GB):
https://mega.nz/#F!v81xzQJb!JXXsokMUM8hwEa-v-ivs2g

I just made this relativly quick so please tell me if i forgot something.
By the way, here are the old Miui Thread: https://forum.xda-developers.com/mi-a1/development/rom-miui-10-mi-a1-epic-mod-t3879804

If you have questions, write to the topic.

Lets try
But where is they cámara Fix??
I Saw a Lot of roms.. but no te camera Fix..
Whats they difference between mirom and EU..

Camera Fix is in Magisk Online.
It´s the normal "Mi A1 Camera Lag FIx Oreo"
And one thing: Ican´t Boot the Weekly version 9.3.1. It was instant reboot to TWRP =/
I go with Normal version MiRoom and ignored the TWRP message in instal log.
First impression are: Verry snappy and fast.
The new miui 10 theme are not the same i know from Epic Miui because of the square shaped icon´s.
If you like to update Magisk u need to do this over the magisk app by Direct Install.

In epicrom, camera Fix, is for portait mode...
Portait mode works?
Mi cloud works?

Smartphone Camera for me are only to take fast shots. If i like to make good Pictures, i take my Sony Alpha 7 II
So i don´t know because i do not use them.

Maximaro said:
I just made this relativly quick so please tell me if i forgot something.
Click to expand...
Click to collapse
Telegram link: https://t.me/MiuiMIA1tissot

Miroom is not in spanish...
And xiaomi.eu 9.3.1 works perfect!
But i can't sing mi account... Pocarropa in epic rom do it!

Nueva actualización 9.3.14

I'm using the EU beta as my daily driver ?

i see only 9.3.1 on the download-link, u has 9.3.14, from where?
okay got it.
but the backlight of the 3 buttons is not working right.
it only lightning for 1-2 seconds, i setup to 5.
and most time it doesn´t light up

Can someone explain the differences of pro beta, Room beta, EU beta, and EU stable? Also, is this based on 4.9 or 3.18 kernel?

3.18 kernel, you can see in the screenshot of lovelyjcp above.
for me it´s currently not usable since i have the bug with the backlight of the buttons and also i think the power consumption is too high.

SeMo87 said:
i see only 9.3.1 on the download-link, u has 9.3.14, from where?
okay got it.
but the backlight of the 3 buttons is not working right.
it only lightning for 1-2 seconds, i setup to 5.
and most time it doesn´t light up
Click to expand...
Click to collapse
I don't have this bug ...

SeMo87 said:
i see only 9.3.1 on the download-link, u has 9.3.14, from where?
okay got it.
but the backlight of the 3 buttons is not working right.
it only lightning for 1-2 seconds, i setup to 5.
and most time it doesn´t light up
Click to expand...
Click to collapse
I can't find the 9.3.14

blade_m2003 said:
I can't find the 9.3.14
Click to expand...
Click to collapse
https://drive.google.com/file/d/1vUpOTlT1BWeBs1x9vSZ4Fmkp4rGli_Hc/view

I installed this rom, lots of force stops.

Sadegh said:
I installed this rom, lots of force stops.
Click to expand...
Click to collapse
LOL how about a clean install =/
I use the 9.3.14 version since there come out and hav not a singel problem!
So like always: the problem is in front of the screen.

Could you plz tell me the difference of these files:
xiaomi.eu_multi_MI A1_V10.2.3.0.ODBCNXM_v10-8.1.zip
xiaomi.eu_multi_MI A1_9.3.1_v10-8.1.zip
Mi A1_MIUI_9.2.28_MiRoom_8.1.zip
and 9.3.14 in google drive link above ?
are they all miui roms?