[ROM][5.1][x2xtreme] Allview's Stock Modified (soon prerooted, w/ Xposed)

[ROM][5.1][x2xtreme] Allview's Stock Modified (soon prerooted, w/ Xposed) - Blu Pure XL

Allview's Stock Modified ROM for Allview X2 Soul Xtreme
So far we haven't got any working custom ROM so I've managed to make flashable zip package of stock ROM for Allview X2 Soul Xtreme. You are able to flash it via TWRP recovery.
FEATURES (actual):
Every stock ROM's feature
BemDev's Kernel
FEATURES (coming soon):
Prerooted
Debloated
Custom bootanimation
With Xposed Modules
With MODs you want me to add in this ROM
Code:
Warning
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards, thermonuclear
* war, or you getting fired because the alarm app failed. Please do some
* research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* [B]bemolx[/B]
*/
COMPATIBILITY:
Tested on Allview X2 Soul Xtreme. May work on other devices.
DOWNLOADS:
Google Drive (1.4GB)
HOW TO INSTALL:
Make a backup
Perform factory reset
Flash zip (can take a while)
Wpie /data
Reboot and enjoy
Thanks
XDA:DevDB Information
Allview's stock modified, ROM for the Blu Pure XL
Contributors
bemolx
ROM OS Version: 5.1.x Lollipop
ROM Kernel: Linux 3.10.x
ROM Firmware Required: TWRP Recovery
Based On: Stock
Version Information
Status: Stable
Created 2016-04-26
Last Updated 2016-04-26

Reserved

Think this will flash to the BLU PureXl? Im doing nandroid now so I can check

tbirdguy said:
Think this will flash to the BLU PureXl? Im doing nandroid now so I can check
Click to expand...
Click to collapse
It is possible to do so because when we flash for example Gionee's ROM via SPFT on one of our devices it will work and this is just an easier method. Hope it boots on your Pure XL

I'll try this later
Sent from my E8 using XDA-Developers mobile app

Gracias!!!! descargando

Sorry if this is a stupid question, but when you say "stock" do we mean unmodded android? Or is this just the rom for the Allview with no alterations on your part exempting compatibility?

TheLastCanadian said:
Sorry if this is a stupid question, but when you say "stock" do we mean unmodded android? Or is this just the rom for the Allview with no alterations on your part exempting compatibility?
Click to expand...
Click to collapse
If you think about Google's pure Android as a 'stock ROM' you are wrong. Stock ROM is a ROM released (or unreleased in our case) by specific OEM. This is ROM from X2 Xtreme by Allview. So... I think you have the answear now. Any other info is mentioned in the main post.
Cheers,
bemolx

Sorry, what build version is this Rom?
Thanks for your help and support! [emoji4]
Enviado desde mi PURE XL mediante Tapatalk

no tengo LTE solo 4g

I just installed on my Blu pure xl. Everything is working fine but calls. I can't make calls or receive them.
Edit: I just reflashed the rom and now calling works.

i dont have lte only show 4g
how i fix?

gionfj said:
i dont have lte only show 4g
how i fix?
Click to expand...
Click to collapse
From what I know 4G equals LTE. In this stock ROM you won't be able to change it into 'LTE', maybe with some Xposed Modules but I don't know if they'd work with this ROM.
Sent from Nexus 5

does this rom works on blu life pure xl L260L ?

leboreiro said:
does this rom works on blu life pure xl L260L ?
Click to expand...
Click to collapse
BLU Life Pure XL isn't the same device as BLU Pure XL.

Hi Bemolx
First - Tnx for Your job.
I install Your ROM, via TWRP 274, make wipes etc.
After reboot, i notice two problems:
1. Internal memory sims to be read only - same problem as => http://forum.xda-developers.com/pure-xl/help/allview-x2-xtreme-memories-fixed-t3476414
2. PlayStore dont work properly (i repair it with two appk from site Allview), now work OK, but i have often PlayeStore error (without other issues).

resolved problems
Hi All
Problem with read only internal memory -> factory reset, reflash old TWRP backuo - dont remove problem.
After some research i reflash with SPFlash Tool oryginal Allview ROM., (without reflashing recovery.img (i love TWRP ).
Now, all work very fine

you can solve internal memory read only by this command :
Fixed with terminal command in TWRP by comand:
chown -R media_rw:media_rw /data/media/
find /data/media/ -type d -exec chmod 775 {} ';'
find /data/media/ -type f -exec chmod 664 {} ';'

Any ideea how to disable the USB charge power limit on this phone (kernel).My USB has sufficient power to charge at 2A (tested with Samsung phone) but on this phone it only works when a chop off the data pins on the USB (

CIURI2786 said:
Any ideea how to disable the USB charge power limit on this phone (kernel).My USB has sufficient power to charge at 2A (tested with Samsung phone) but on this phone it only works when a chop off the data pins on the USB (
Click to expand...
Click to collapse
I know on PC it offers the option to select charge.
My suggestion as a simpler option would be to buy a microusb off eBay and I'm sure for $1 you can afford to vandalize it.

Related

[ROM][V410 ONLY][BETA] Skinny Rom | KK 4.4.2 | Based on V4101d | All The Goodies!

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
..:: Introducing Skinny ROM ::..
Based on KOT49I.V4101d
Stock Kernel
Debloated
Deodexed
Zipaligned
Rooted
Busybox
Init.d Support
More to come!
..:: Flashing Instructions ::..
1. Download ROM and save to sdcard
2. Boot into TWRP Recovery
3. Perform a full backup
4. Factory reset, wipe cache and system
5. Flash ROM
6. Reboot
7. Enjoy! (Optional)
..:: Downloads ::..
Skinny ROM v410

XDA:DevDB Information
Skinny ROM for v410, ROM for the LG G Pad 10.1
Contributors
timmytim
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: V410 Only
Based On: Stock
Version Information
Status: Beta
Current Beta Version: 1.0
Beta Release Date: 2015-03-02
Created 2015-03-03
Last Updated 2015-03-02

Reserved
..:: Known Issues ::..
Upon first boot, the Google and AT&T Folder on the Homescreen have missing icons. - Delete both folders and recreate if desired

Do we have any chance on porting this for the v400?

Thanks Tim. I very much appreciate the slimmed down ROM! This should hold me over till you get around to porting Candy!

Thanks for this. I haven't had a chance to try it yet due to work, but I definitely will this weekend. Thanks for taking the time to create ROMs for the v410.

izzet3838 said:
Do we have any chance on porting this for the v400?
Click to expand...
Click to collapse
I only have the v410 but if you can get me system and boot dumps I can probably whip something up for you v400 owners

timmytim said:
I only have the v410 but if you can get me system and boot dumps I can probably whip something up for you v400 owners
Click to expand...
Click to collapse
Is right? Do you compile for v400?
And you can compile cm12? Please

eduardozeassesme said:
Is right? Do you compile for v400?
And you can compile cm12? Please
Click to expand...
Click to collapse
If you or someone else can get me system and boot dumps for the v400 I can make a deodexed deflated rom.

Can up any twrp backup?

ok bro do you just need a cwm backup or what do you mean by system backup?
tell me and i'll make and send them to you
(device is rooted and cwm installed so shouldn't be a problem)

Got this installed and it is running great! Thanks for giving this tablet new life. I guess I should take down the 'for sale' ad on craigslist now. I'm excited to see what's ahead for us here!

izzet3838 said:
ok bro do you just need a cwm backup or what do you mean by system backup?
tell me and i'll make and send them to you
(device is rooted and cwm installed so shouldn't be a problem)
Click to expand...
Click to collapse
I need both system and boot images, you may wanna grab your recovery while you're at it.... You'll need to get them from ADB or if you're careful you can get them from a Terminal Emulator app.
...YOU MUST BE ROOTED TO RUN THESE COMMANDS...
Run the following commands from ADB shell or Terminal Emulator...
First you need to acquire root
Code:
su
Grab System Partition
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/system of=/sdcard/system.img
Grab Boot Partition
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/boot of=/sdcard/boot.img
Grab Recovery Partition
Code:
dd if=/dev/block/platform/msm_sdcc.1/by-name/recovery of=/sdcard/recovery.img
This will spit out 3 images on your internal sdcard so make sure that there is room on there. Should be about 2GB of stuff, maybe a little more...
After they are on your sdcard copy them to your computer and upload them somewhere please.

I tried with the android terminal emulator app but it didn't work can you please gibe me some specific info om how to do it

izzet3838 said:
I tried with the android terminal emulator app but it didn't work can you please gibe me some specific info om how to do it
Click to expand...
Click to collapse
Hey, sorry I should have mentioned that you must be rooted to run these commands. I went ahead and updated the post with the commands above to include acquiring root. Let me know if you still need more help.

I stalled this ROM last night. Works great. Hangs on the AT&T logo for a bit on first boot (like any ROM), so don't think it's frozen, just give it a few minutes.
Sent from my LG-V500 using XDA Free mobile app

Bro i'm uplouding the system file now it's 2gb but i have a useless uploud speed so it will probably take a while when done i'll dm the files too you

LeighR said:
I stalled this ROM last night. Works great. Hangs on the AT&T logo for a bit on first boot (like any ROM), so don't think it's frozen, just give it a few minutes.
Sent from my LG-V500 using XDA Free mobile app
Click to expand...
Click to collapse
Were you able to advance restore data from previous backup after Skinny Rom installation? Or did you even try?

Flashed this last night... Forgot to enable WiFi... Clean install + 50 apps hurts the data....

Flashed this last night, and I can definitely tell a difference between this and stock. I'm still not overly impressed with this tablet, I hope this is just the beginning.
I've been away from android for some time now. Do we still have access to compile and flash custom kernels?
Hoping the biggest issue with this tablet isn't the 1gb of ram. It's really sluggish at times.

Swizzle82 said:
Were you able to advance restore data from previous backup after Skinny Rom installation? Or did you even try?
Click to expand...
Click to collapse
I didn't try. I do have a back up but I didn't need it.
Sent from my LG-V500 using XDA Free mobile app

[ROM][7.1.2][FINAL] CodeOfHonor's OmniROM 7.1 for Huawei P8 Lite 2017

OmniROM is our Android custom ROM variant, feature-packed but always with stability as #1 priority in mind.
Based on the Android Open Source Project (AOSP) and enriched by our developers with lots of custom enhancements, OmniROM has set out to give you a great Android experience on your mobile.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]P8 Lite 2017.
[*]P9 Lite 2017.
[*]P10 Lite.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP, flash my latest build to avoid error 7 from here.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
tell me.
Downloads:
Code:
[B][I]**21/05/2018**[/I][/B]
[LIST]
[*][URL="https://www.haky86.com/2018/05/21/omnirom-nougat-hi6250/"]From Haky's Blog[/URL]
[/LIST]
Changelogs:
Code:
[B][I]**21/05/2018**[/I][/B]
[LIST]
[*]re-works
[/LIST]
Source Code:
Device Tree:
https://github.com/hak86/android_device_huawei_hi6250
Kernel GPL:
https://github.com/hak86/android_kernel_huawei_prague
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
OmniROM for PRA-LX1, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, Meticulus
Source Code: https://github.com/hak86?tab=repositories
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emui 5.x "C432B161"
Based On: AOSP
Version Information
Status: Stable
Stable Release Date: 2018-01-17
Created 2018-01-17
Last Updated 2018-01-17

ROM stuck at animation boot?
this because you must change the file system from F2FS to EXT4 to done boot process
* reboot to TWRP.
* go to Wipe -> Advanced Wipe.
* check Data -> Change file system -> select EXT4.
* swipe the screen to wipe it .
How can I fix Sim?
* go to Settings -> Extras -> disable "Sim Card Slot2 " and reboot.
How can I enable Google Codecs
* go to Settings -> Extras -> enable "Use Google H264" (it's a bit laggy but better than nothing).
How to enable Double Touch To Wake?
* go to Settings -> Extras -> enable "Double Touch to Wake"
Should I reflash the vendor partition if come from other roms?
* if you coming from Emui 5.x, the answer is no because the custom rom are based on Emui 5.0 source code, so all you
have to is flashing your favorite custom rom
Audio and camera are not working?
* bring up a logcat to help us, instead of writing useless comments.
I got error 7, how can I fix that?
* use my own TWRP recovery. or you can simply remove the whole assert line in the updater-script file inside the META-INF folder save and re-flash.
How can I fix RIL Crashes
flash root.
Copy the phone.prop into /system/vendor and /vendor.
reboot, now you should able to do calls for more than 2 minuts
Calls still crash even with fix SIM
Run adb shell and type the following command xxd /sys/firmware/devicetree/base/hisi,modem_id .
the result will be something like the following out ( for single sim devices):
1|hi6250:/ $ xxd /sys/firmware/devicetree/base/hisi,modem_id
00000000: xxxx x000 ;xx.
Click to expand...
Click to collapse
Search for your xxxxx000, and setup the following flags .
ro.config.client_number=1
ro.config.modem_number=1
persist.dsds.enabled=false
persist.radio.multisim.config=dsds (remove it properly)
for dual sim devices just edit these 2 flags:
ro.config.client_number=1
ro.config.modem_number=1
Save and reboot.

*reserved v2*

Download Link is not working
Edit: There is a " in the end of the link that shouldn't be there.. Maybe you should edit the link

Zillinda said:
Download Link is not working
Edit: There is a " in the end of the link that shouldn't be there.. Maybe you should edit the link
Click to expand...
Click to collapse
fixed

I have a totally weird issue on this ROM. I don't have this issue on any of your ROMs except this one.
When i use your vendor my SIM Card is not detected (even if i disable Dual Sim and reboot)
But the weird thing is, when i flash my stock vendor from P10 Lite the Sim is working BUT the sound is not working.
I flashed this one like every ROM from you, and every ROM worked but not this one :/
Are you using the latest Code of Meticulus? Because i had this issues with earlier builds of Meticulus' ROMs
Except that everything works fine. I will go back to your fully working SlimROM until you release AOSPExtended.

Zillinda said:
I have a totally weird issue on this ROM. I don't have this issue on any of your ROMs except this one.
When i use your vendor my SIM Card is not detected (even if i disable Dual Sim and reboot)
But the weird thing is, when i flash my stock vendor from P10 Lite the Sim is working BUT the sound is not working.
I flashed this one like every ROM from you, and every ROM worked but not this one :/
Are you using the latest Code of Meticulus? Because i had this issues with earlier builds of Meticulus' ROMs
Except that everything works fine. I will go back to your fully working SlimROM until you release AOSPExtended.
Click to expand...
Click to collapse
In your case you must edit the /vendor/phone.prop file
* search for [0X3B412000]
* and make sure to set the following string.
persist.radio.multisim.config=single
persist.dsds.enabled=false
* save and reboot.
you get this problem because my vendor.img is designed to run with single sim devices only.
AOSPE will be available after AOSPA Paranoid, isn't available on any hi6250 device as I see.
Edit: remove persist.radio.multisim.config=single, save and reboot.

haky 86 said:
In your case you must edit the /vendor/phone.prop file
* search for [0X3B412000]
* and make sure to set the following string.
persist.radio.multisim.config=single
persist.dsds.enabled=false
* save and reboot.
you get this problem because my vendor.img is designed to run with single sim devices only.
AOSPE will be available after AOSPA Paranoid, isn't available on any hi6250 device as I see.
Edit: remove persist.radio.multisim.config=single, save and reboot.
Click to expand...
Click to collapse
Thanks, i will try it now.
But why don't i have this issue with your other ROMs?

Zillinda said:
Thanks, i will try it now.
But why don't i have this issue with your other ROMs?
Click to expand...
Click to collapse
it's releated to vendor.img partition since it's designed to run on single sim.. just fix the flags I wrote and will get fixed.
a thing you should do manually on dual sim phones.

haky 86 said:
it's releated to vendor.img partition since it's designed to run on single sim.. just fix the flags I wrote and will get fixed.
a thing you should do manually on dual sim phones.
Click to expand...
Click to collapse
I get error, that it's Read-Only File system and if i want to change the permission of the file with Root Browser it says Changing permissions was not successful. Both the Editor and the Root Browser have root permissions.
Edit: i see the file is symlinked to /hwvendor/phone.prop so i edited it inside there but it's still not working

Zillinda said:
I get error, that it's Read-Only File system and if i want to change the permission of the file with Root Browser it says Changing permissions was not successful. Both the Editor and the Root Browser have root permissions.
Edit: i see the file is symlinked to /hwvendor/phone.prop so i edited it inside there but it's still not working
Click to expand...
Click to collapse
set via adb shell and tell us if fixed
setprop persist.radio.multisim.config single
setprop persist.dsds.enabled false

haky 86 said:
set via adb shell and tell us if fixed
setprop persist.radio.multisim.config single
setprop persist.dsds.enabled false
Click to expand...
Click to collapse
nope, i don't know if i am too stupid or if it's really not working, but none of this methodes is working.

Zillinda said:
nope, i don't know if i am too stupid or if it's really not working, but none of this methodes is working.
Click to expand...
Click to collapse
well, as you see it's working for me in screenshots.

I finally got it working by replacing the /hwvendor/phone.prop file from my STOCK vendor into the vendor of @haky 86.

@haky 86
Intalled the C432B161 firmware, then proceed to flash this rom with your instructions, everything works except video recording on camera, also for whatsapp, facebook, messenger, etc
Any hints ? Maybe I missed something

rubentkato77 said:
@haky 86
Intalled the C432B161 firmware, then proceed to flash this rom with your instructions, everything works except video recording on camera, also for whatsapp, facebook, messenger, etc
Any hints ? Maybe I missed something
Click to expand...
Click to collapse
Enable Google H264 in Settings -> Extra
Sent from my hi6250 using XDA Labs

Zillinda said:
Enable Google H264 in Settings -> Extra
Sent from my hi6250 using XDA Labs
Click to expand...
Click to collapse
Already did that and reboot the phone, but the problem persist.
[/ATTACH]

rubentkato77 said:
Already did that and reboot the phone, but the problem persist.
[/ATTACH]
Click to expand...
Click to collapse
what is your device?also did you flash my vendor partition?

haky 86 said:
what is your device?also did you flash my vendor partition?
Click to expand...
Click to collapse
I bought it as P9 Lite 2017 PRA-LX3C69B110 branded from Telcel Mexico, then converted PRA-LX1C432B110 dual sim unbranded and got updated to B170.
Then unlock bootloader, instal your latest TWRP, follow your unbrick guide fro C432B161.
Then flash omni ROM + pico gapps.
In some point I didn flash your vendor img (how did I miss that !#@$!) do I needto flash it again before omni rom or after?
Regards. :good:

rubentkato77 said:
I bought it as P9 Lite 2017 PRA-LX3C69B110 branded from Telcel Mexico, then converted PRA-LX1C432B110 dual sim unbranded and got updated to B170.
Then unlock bootloader, instal your latest TWRP, follow your unbrick guide fro C432B161.
Then flash omni ROM + pico gapps.
In some point I didn flash your vendor img (how did I miss that !#@$!) do I needto flash it again before omni rom or after?
Regards. :good:
Click to expand...
Click to collapse
well yes, you have to flash my own vendor from unbrick guide!
but before doing that pull /vendor/phone.prop from converted firmware and paste into system/vendor/ to avoid sim problems.
as you see my screenshot the camera is fully works without enable google codecs.

[ROM][7.1.2][12/05/2018] CodeOfHonor's AOSPA Paranoid v7.3.1 for Huawei P8 Lite 2017

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/hak86/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Huawei P8lite/P8 Lite
Contributors
haky 86, Meticulus
Source Code: https://github.com/hak86/
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-02-09
Created 2018-02-09
Last Updated 2018-02-08

Thank you for your awesome work! AOSPA is my fking favorite ROM.

NetfariousIntent said:
Thank you for your awesome work! AOSPA is my fking favorite ROM.
Click to expand...
Click to collapse
glad to hear that
I'll post in p9 lite and honor 6x sections later
here a screenshot of my friend that run on his p10lite and have almost 19%..

it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all

karasoulas said:
it is stable? can i try it?
---------- Post added at 09:44 AM ---------- Previous post was at 09:05 AM ----------
stuck at installing the rom. it says tested fir you p8 lite 2017 by haky86....... and it doesnt move at all
Click to expand...
Click to collapse
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP

haky 86 said:
sounds like you didn't use my recovery.
https://basketbuild.com/devs/haky86/HuaweiP8Lite2017/TWRP
Click to expand...
Click to collapse
yup. works. i dont know why man. but the stock rom is faaaaar faster than ur roms. Not trying to be rude i love ur work but i dont know. maybe iim doing something wrong?

** Note **
**11/02/2018**
pa_hi6250-7.3.1-EOL-20180210.zip
Changelogs:
**11/02/2018**
possible fix for ril crashes

Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?

atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated

sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/

atsmurat said:
Hello, the Rom is running smoothly. Thank you. but the network is coming After 30 second going . What is the solution?
Click to expand...
Click to collapse
sys01 said:
This is happening also to me, probably due to newer blobs on emui5.0.1 (I came from that version to AOSPA)
Also why permessive? I think debug it's done as everything works! Better enforcing
Thanks for your hardwork btw, very appreciated
Click to expand...
Click to collapse
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
NetfariousIntent said:
Was happening to me until I flashed Gapps aroma with the new dialer and stuff. now everything works smoothly :/
Click to expand...
Click to collapse
I use pico, always.

Sim keep disconnecting itself

It gives error while saving the finger print, both in this and the slim rom

atsmurat said:
It gives error while saving the finger print, both in this and the slim rom
Click to expand...
Click to collapse
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back

CarlosAG10 said:
Did you erase all of your fingerprints in stock ROM before flashing?
If not, flash elite ROM, erase fingerprints, and then flash this/slim back
Click to expand...
Click to collapse
İ didnt erase fingerprints in Omni ROM . From that ?
Where is Elite Rom ?

haky 86 said:
some devices require the following flags in build.prop ;
ro.config.client_number=2
rild.libargs1=-m modem1
rild.libpath1=/vendor/lib64/libbalong-ril-1.so
rild.libpath=/vendor/lib64/libbalong-ril.so
rild.libargs=-m modem0
save and reboot, should fix the problem then.
I use pico, always.
Click to expand...
Click to collapse
Noto solve the SIM from disconnecting itself

Wire1122 said:
Noto solve the SIM from disconnecting itself
Click to expand...
Click to collapse
I will do a test-build post dinner, I fix the problems around here a few weeks ago on some roms!

Have You found the bug? I really want use your rom for Daily use.

** Note **
**13/02/2018**
pa_hi6250-7.3.1-EOL-20180213.zip
**13/02/2018**
Fix RIL crashes.
How to fix RIL Crashes?
Follow this post

[ROM][7.1.2] AOSPA Paranoid v7.3.1 for Honor 6x

Paranoid Android is a custom ROM aiming to extend the system, working on enhancing the already existing beauty of Android and following the same design philosophies that were set forward by Google for Android Open Source Project.
Code:
* Your warranty is now void.
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
Compatible device?:
Code:
[LIST]
[*]All devices that use hi6250 chipset and use kernel 4.1.
[/LIST]
Mandatory:
* hit thank buttons, it's free.
* want more roms for P8 Lite 2017/P9 Lite 2017, simply bring me up beers by the following button.
Requirements:
TWRP.
Unlocked bootloader.
Unlocked FRP.
vendor.img: you must be on stock one, so don't wipe it because with other custom vendor.img will never ever boot.
This ROM is provided by CodeOfHonor
Installation Guide:
Make sure to the stock backup saved on pc, I'm not responsible for any bricked or damage.
Reboot to TWRP.
Go to Wipe.
Choose Advance Wipe.
Check on Data and change file system to EXT4, will not ever boot with F2FS.
Wipe cache, data, dalvik and system.
Flash the rom.
Reboot and have fun then.
Working:
Audio.
Bluetooth.
Camera: it's fully works with stock or other apps .
Display.
Graphis: both gralloc & hwcomposer.
Lights.
NFC.
RIL.
Sensors.
Storages.
Wifi
Bugs:
Dual sim might will not work all variants, so don't waste your time by asking me to fix it.
You don't like it?, easy revert to Emui 5.x.
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.
Source Code:
Device Tree:
https://github.com/codeofhonor-dev/android_device_huawei_hi6250
Kernel GPL:
https://github.com/codeofhonor-dev/android_kernel_huawei_hi6250
Vendors:
https://github.com/codeofhonor-dev/android_vendor_huawei_hi6250
XDA:DevDB Information
AOSPA Paranoid for Hi6250, ROM for the Honor 6X
Contributors
haky 86, HassanMirza01, felix-development
Source Code: https://github.com/codeofhonor-dev, Meticulus and the stuff of CodeOfHonor.
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 4.x
ROM Firmware Required: Emiui 5.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 7.3.1
Stable Release Date: 2018-04-27
Beta Release Date: 2018-04-27
Created 2018-04-27
Last Updated 2018-04-27

I'm coming from EliteRom 7.5 and I love AOSPA but there are 2 little problems I have with this rom.
First of all fingerprint doesn't work correctly, no matter how often I press my finger on the sensor it stays at the ~10% mark.
The other problem is that I don't know how to root this rom. I tried installing magisk manager and flashing the zip but I get error 1 in TWRP.
Except this issues it's working very nicely on my device.
Thanks in advance for helping me out

MadMurl0c said:
I'm coming from EliteRom 7.5 and I love AOSPA but there are 2 little problems I have with this rom.
First of all fingerprint doesn't work correctly, no matter how often I press my finger on the sensor it stays at the ~10% mark.
The other problem is that I don't know how to root this rom. I tried installing magisk manager and flashing the zip but I get error 1 in TWRP.
Except this issues it's working very nicely on my device.
Thanks in advance for helping me out
Click to expand...
Click to collapse
10% mark?
Did you entirely remove all the fingerprints before flashing this Tom?
Go back to Elite or Stock, remove all fingerprints and reinstall the Rom
For Root, you can try changing recovery or using an older version of Magisk that worked for you

I am currently reverting back to stock and will try to flash the rom again, I guess I didn't remove the fingerprints before flashing.
I tried Magisk Version 15 and 16 which both worked on EliteRom, I even tried SuperSu which didn't gave me an error message in twrp but It didn't work tho. After flashing the zip there was no "SuperSu" App so I downloaded it from the playstore, the app told me "root not found". Do you know what the cause of this could be?
Edit: Fingerprints are working now But root still doesn't

After I downgrade from emui 8 to emui 5 in 5 minutes now I can fix this rom so expect a build within these days

hoping to try this rom , following for updates

Hey guys I just installed the rom, but I did notice that I don't have access to any Gapps. How to I install them? I'm using TWRP. I was just able to get my unlock code from Honor today, so I unlocked and rooted, and flashed your rom as the first thing, so I'm running a fresh flash of the latest version.

Flash package with Twrp: https://opengapps.org/

Thanks guys, I realized that yesterday right after I posted lol. So far I'm really loving the plain stock-ness of this rom, hopefully it give the device some more life so I won't have to upgrade soon.

MadMurl0c said:
I am currently reverting back to stock and will try to flash the rom again, I guess I didn't remove the fingerprints before flashing.
I tried Magisk Version 15 and 16 which both worked on EliteRom, I even tried SuperSu which didn't gave me an error message in twrp but It didn't work tho. After flashing the zip there was no "SuperSu" App so I downloaded it from the playstore, the app told me "root not found". Do you know what the cause of this could be?
Edit: Fingerprints are working now But root still doesn't
Click to expand...
Click to collapse
Yeah I'm having the same issue to, with no root.

Can someone tell me why this rom is different to all others ? Why is this one using stock vendor and can we easy revert to Emui ? Why don't all others ?
I'm on stock now.

How is the quality of the photos compared to stock rom? It is possible to install Emui camera or other huawei cameras?

** Note **
developments of hi6250 is end reason: switch to another phone, have phone.

** Note **
Developments for hi6250 has been resumed but just for this ROM, sorry for the inconvenience.
I'm already downloading the source for releasing new build but AOSPA will take a wile since have bigger source.

** Note **
Downloads:
**13/05/2018**
pa_hi6250-7.3.1-EOL-20180513.zip|500.4 MB
Changelogs:
**13/05/2018**
Boot with F2FS without problems.
Fix Magisk.

Had anyone tried installing Xposed yet?

Support BLL version? Honor 6X

The rom overall is great and smoorh, even F2FS works now
But somehow magisk still doesn't work. It says
Code:
! System installed root detected, mount rw :(
when I try to flash the magisk.zip file.

MadMurl0c said:
The rom overall is great and smoorh, even F2FS works now
But somehow magisk still doesn't work. It says
Code:
! System installed root detected, mount rw :(
when I try to flash the magisk.zip file.
Click to expand...
Click to collapse
Guys to flash magisk or superSU use Meticulus TWRP, other twrp like eliteTwrp show an error when it is recompilling the boot.img

Development [ROM][OFFICIAL] LOS-Modded 19.0[DISCONTINUED]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
LineageOS Modded is a free, community built, aftermarket firmware distribution of Android 12 (S), which is designed to increase performance and reliability over stock Android for your device.
LineageOS Modded is based on the Android Open Source Project and LineageOS with extra contributions from many people within the Android community.
All the source code for LineageOS Modded is available in the LineageOS Modded Github repo.
Make sure to wipe userdata, ensure you have at least taken one stock OTA!
Flashing Instructions:-
TinyFastbootScript:-
Make sure to wipe userdata
1. Download TinyFastbootScript
2. Download the ROM named *Images*
3. Unpack TinyFastbootScript and the ROM into the same directory
4. Run the bat file for TinyFastbootScript
5. Choose latest fastboot version
6. Place device in bootloader mode
7. Run the command for flashing custom firmware
8. Done!
Fastboot Method:-
1. Download the Images zip
2.
Code:
fastboot update *Images*.zip
3. Reboot and enjoy!
Bugs :
Permissive
Safetynet
DualSIM
Some Settings Functions
* Drop a comment down below if you need any help, you can also Join https://t.me/electimonrel on telegram if you need any help.
Downloads:
Lineage-Modded:
https://build.lolinet.com/file/lineage/nio/
Contributors
@Electimon, @erfanoabdi, @dianlujitao
Source Code: moto-sm8250
Version Information
Status: Beta
Jan 06: initial release

Amazing work

awesome

Great work on the ROM electimon, smoothest available, and the battery management is excellent.

Hi,
I think scoped storage doesn't work properly on my Moto Edge S with Lineage 19. I'm trying to use some apps that require it, but they crash every time I try to add a directory, like aethersx2 for example.

Hi all
I successfully installed the Rom but only sim 1 work
How to activate two sims please .
Thanks all

Makhreta said:
Hi all
I successfully installed the Rom but only sim 1 work
How to activate two sims please .
Thanks all
Click to expand...
Click to collapse
check again the above bug list

bawitdol said:
check again the above bug list
Click to expand...
Click to collapse
Yes i know ,
so this mean no solution for this problem ?

Makhreta said:
Yes i know ,
so this mean no solution for this problem ?
Click to expand...
Click to collapse
Some people on Telegram have reported both sims working by flashing Evolution X, then flashing to los-modded 19 without wiping. Your results may vary though

Beetle84 said:
Some people on Telegram have reported both sims working by flashing Evolution X, then flashing to los-modded 19 without wiping. Your results may vary though
Click to expand...
Click to collapse
but i cannot find evolution x rom for this device ???!!!

Makhreta said:
but i cannot find evolution x rom for this device ???!!!
Click to expand...
Click to collapse
Motorola Moto G100 / Edge S
The Motorola Moto G100 / Edge S is a 6.7" phone with a 1080x2520p resolution display. The Qualcomm SM8250-AC Snapdragon 870 5G chipset is paired with 6/8GB of RAM. The main camera is 64+16+2MP and the selfie camera is 16+8MP. The battery has a 5000mAh capacity.
forum.xda-developers.com

is it android 12?

i tried version 18 and the two sims is o.k

HOW TO INSTAL MAGISK in this rom
1. download TWRP 3.5.2 and magisk 23.0
2. command <fastboot boot twrp.img> in bootloader mode
3. command <adb push magisk.zip /sdcard> in twrp
4. flash magisk.zip file
5. reboot to system
^^

Works great thanks!
having some issues with Android Auto showing black display since switching to this tho?
anyone know how to fix?

Is there a newer build?

xisa11 said:
Is there a newer build?
Click to expand...
Click to collapse
Under development

Just wondering what the differences would be between thins and the non-modded Lineage? I'm assuming more features, add-ons, but what are they?

Hello and thanks to everyone who is working on these different Roms for the g100!
One question, which is the most stable Rom for the g100 (without Google) to use as an daily driver?
Is this Rom 19.0 capable as an daily driver?
Thank you

How do I flash this on Linux ?. I suppose it is a bunch of fastboot commands but I am not sure.

Database Info

welcome