Hello, guys I am noob af so when I was flashing Ubuntu Touch I disconnected my phone and now its don't even show up as USB it just dead no lights no anything but battery is full I checked with multimeter. So I was wondering if its possible to use UART pins to flash kernel so it can boot. Thank You all so much and if it possible just point right direction were i can find more info on serial connections.
mark1320 said:
Hello, guys I am noob af so when I was flashing Ubuntu Touch I disconnected my phone and now its don't even show up as USB it just dead no lights no anything but battery is full I checked with multimeter. So I was wondering if its possible to use UART pins to flash kernel so it can boot. Thank You all so much and if it possible just point right direction were i can find more info on serial connections.
Click to expand...
Click to collapse
There are other ways to start your device from hard-brick state; I once hard-bricked my opo and used ColorOS (Can't remember exactly) with some chinese tool and it then showed fastboot mode from there you can pick it up.
anaskhan27 said:
There are other ways to start your device from hard-brick state; I once hard-bricked my opo and used ColorOS (Can't remember exactly) with some chinese tool and it then showed fastboot mode from there you can pick it up.
Click to expand...
Click to collapse
Yes but it requires to show up as some weird usb in device manager but my don't even show when i plug it in
Charge your phone for 5 to 6 hours, this is what I did then my phone showed up in that device manager. Also follow each step on the unbrick guide on xda
thank you for help
Rex2688 said:
Charge your phone for 5 to 6 hours, this is what I did then my phone showed up in that device manager. Also follow each step on the unbrick guide on xda
Click to expand...
Click to collapse
Its now connecting but stuck in 8974_msimage_mbn loop it just trying to flash 8974_msimage_mbn and resets. Please Help.
Suggestion:
Connect with USB to Linux PC.
Big chance that yr PC sees memory card of OPO.
Copy Rom to the card.
Install with TWRP, if available, or with other similar.
That worked for my OPO brick.
Arvie
Color OS method worked for me. Just install the correct drivers and your good to go.
Related
Since Xiaomi and Micro$oft released a public ROM of Windows 10 Mobile for Mi4, the curiosity drives me to try it. But I felt so uncomfortable after successfully installed win10 on my mi4.
So I decided go back to Android roms. But sh*t happened - my mi4 got bricked during the flashing.
Phone won't boot with black screen and no boot options. Holding any buttons (including power button + volume down more than 2 minutes) won't work.
The pc can not recognize a USB device after it is plugged in (in both Windows XP and Windows 8.1).
Then I plug it into my Mac OS X with a VirtualBox of Windows 7 OS inside.
The USB devices shows a unknown device of id 05C6:F006.
I did a lot of googling of 05c6:f006 which seems to be 05c6:9008 and something Qualcomm related.
And the most important thing is to make my computer to recognize it.
So things I need to figure out:
Is my phone hardware damaged or software damaged (hard bricked or soft bricked)?
Do I need to disassemble it?
How can I make my pc to recognize it ?
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
darkmaster566 said:
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
Click to expand...
Click to collapse
My phone was recognized as a USB input device, VID_05C6&PID_F006, seems to be Qualcomm_QHSUSB 9008 related
I have exacly the same probleme here, do you have find any solution ?
If it's getting recognised, we can try flashing another recovery or directly boot into recovery from command prompt by using command fastboot boot recovery.img
Try this and let me know if it works
xiaomi mi4 lte not turn on
darkmaster566 said:
If it's getting recognised, we can try flashing another recovery or directly boot into recovery from command prompt by using command fastboot boot recovery.img
Try this and let me know if it works
Click to expand...
Click to collapse
Good evening. I have a problem with my Xiaomi 4 lte, after trying to return from 6 to android 4.4 android after this tutorial : ]Now the phone does not start, if you stick to connect to PC loaded or red LED flashes once and the computer sounds like something I plugged in but not afiseaja nimicc device. He is charged for 24 hours and not start and MIFLASH program is not found
Mi4w hard brick
darkmaster566 said:
Please add screenshot of your phone state. Maybe we can determine if its a hardware or software issue
Click to expand...
Click to collapse
Hey! I had bymistakely flashed wrong partition and tried flash in miii 6.3.3 ROM....
Now my device is bricked....Whenever i connect to charger the red light blinks....And when connected to pc....The red light comes.....But no drivers come on my pc...Means its to recognising.....Can you help me please????
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
I am not able to post image. Help me. I don't have 10 post count yet.
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Agent_fabulous said:
So, you cannot get into flashmode or fastboot? Power off your phone, hold volume up and plug it into your pc without hitting the power button. Do you get any blue led or quick led flash at all? I'm not sure about your device's condition but I can surely try getting you files from my phone.
Try installing flashtool and see if flashtool recognizes your phone at all.
Click to expand...
Click to collapse
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
nik_123 said:
Only red LED glows while I plug it in PC. Flashtool can not recognize. EMMC tool recognize but can't find/download the files.
I am pretty sure once I get the tool running it will bring back my phone alive.
Click to expand...
Click to collapse
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Agent_fabulous said:
Hmm, can QPST find your phone? I'm trying to get a QPST/QCN backup which could be helpful. However, fastboot, flashmode, recovery or device running, I get ports empty. Can anyone help me out here? I can try draining my battery so I have the little phase of the dull red led where the device won't power on until it's a little charged.
Click to expand...
Click to collapse
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
nik_123 said:
I guess yes, but I don't remember exactly. Switch off your phone and connect may be it should detect.
Click to expand...
Click to collapse
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
nik_123 said:
I was upgrading my Xperia TO 5.1 and was flashing recovery. TWRP was flashed but I was not able to flash any zip through it.
I tried unlocking bootloader but nothing happened. I tried this 3-4 times and suddenly my Phone gone blank.
Now the condition is neither LED or any kind of vibration is working. Phone is detected as Qualcomm Qloader 9008. I tried figuring out and found that bootloader is corrupt. Many person having Snapdragon Chipset have same problem. I found EMMC DL Tool which can repair this but in version 5.2.0.r I am getting invalid user error.
Then I tried Tool studio EMMC tool from ZTE but I am getting error while downloading the Hex file. Phone is detected but unfortunately I am not able to fix it.
Please go through screenshot.
Someone please help me to fix. Either using this emmc tool or anyother.
P.S. Went to SC they said to replace MB which will cost around 6500-7500. But I don't think to spend such money for repairing when I can but much better phone in that price segment.
Click to expand...
Click to collapse
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
stuckbootloader said:
Jesus Christ, you installed a ROM without unlocking the bootloader first?... yare yare daze...
Click to expand...
Click to collapse
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
nik_123 said:
I unlocked it but the ROM zip was not flashing through TWRP. After 2-3 tries my phone went full dead. If you can help it will be great.
Click to expand...
Click to collapse
I'm afraid I can't...
Agent_fabulous said:
Tried that but it ends up turning on and goes to the charging animation. (Which is after the Sony Logo.) Waiting for my phone to drain
Click to expand...
Click to collapse
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
SdtBarbarossa said:
eh... if your device is showing loading anymation this means charger is loaded.... so no you dont have a hardbrick... try to reach fastbootmode over and over again
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Agent_fabulous said:
My phone is working fine. However, I've no idea how to get a QPST/QCN Backup (which I guess could) help out @nik_123
Click to expand...
Click to collapse
nope... even if we have a snapdragon... since this is a semcflash device a backup is useless...
Sent from my Xperia T using XDA Free mobile app
Hello sir,
I had the same problem a month ago and I fixed my bricked Xperia L.
Just go to this thread and follow the steps ^^
http://forum.xda-developers.com/showthread.php?t=2695344
The thread says u need to download WMSHUA, but its in chinese language. If you don't know what it means just reply to this and i will translate it.
Good luck!
If it didn't worked, or u need help reply.
Good day gents and ladies
Well let me start from the beginning.
I'm was using mi-globe 6.12.22
Last week Friday evening downloaded 7.2.9 mi-globe,read around the mi-globe forum.Didn't see anything funny so flashed via twrp on Saturday morning.Hmmmmmmmm this is when all my problems started.
Basically what I should of done is download 7.2.9,new 3.0.3 twrp for norgat,go into recovery flash new recovery, restart recovery,flash 7.2.9 and then have happy days.But it wasn't to be and now I'm basically sitting with a useless mi4c device.
The device works but warms up and I only get about 4 hours battery life.
If I try boot into recovery I just get black screen.
If I connect device to PC it is not recognized, have tried 3 x different laptop/PC's and different cables.
So fastboot,mi-flash,mi-unlock are all not possible as device is not recognized.
I have been trying different solutions without any success.
I think if it would be possible to root device directly without PC then maybe it will be possible to get flashfire working and I can flash new norgat recovery?
Any suggestions would be greatly appreciated?
NB.I have tried loading Qualcomm drivers ,google drivers etc etc.no luck can't connect my device too PC,either get device not recognized or the PC doesn't even see the device.Enable USB debugging etc etc nothing works.Been fiddling for 4 days!!!!!!!
Tried to root with kingoroot,framaroot directly on device etc nothing works?
Please help,else device is a nice piece of plastic that holds paper down on my table.lol
BR
Ant
have you tried fastboot
fastboot oem edl
Click to expand...
Click to collapse
then MiFlash to flash official rom
Fastboot don't work,as PC don't see the phone?
DeAntman said:
Fastboot don't work,as PC don't see the phone?
Click to expand...
Click to collapse
Is usb charging via pc working and have you tried miui updater? , This seems weird state you have ... If none working might be tried deep flash cable flashing ... Or go to nearest service center. Hope that help. Best luck.
Hi,yes USB chargers device via PC but that's all.
How does one deep flash,could you post link please?
I bought the device in China about 18 months ago,Xiaomi never sold mi4c in my country so doubt they could help me locally.
Seems I have soft bricked the device?Tried every thing no solution.
If it would possible to root without USB cable I could maybe try flash new twrp via flash fire?Then could wipe all and try start again?
DeAntman said:
Hi,yes USB chargers device via PC but that's all.
How does one deep flash,could you post link please?
I bought the device in China about 18 months ago,Xiaomi never sold mi4c in my country so doubt they could help me locally.
Seems I have soft bricked the device?Tried every thing no solution.
If it would possible to root without USB cable I could maybe try flash new twrp via flash fire?Then could wipe all and try start again?
Click to expand...
Click to collapse
You havent answered the miui updater part, have you tried flash miui rom.zip, using miui updater apps ?
Does fastboot mode boot on your phone ? i mean the bunny sceen showed up ?
For dfc here the link http://xiaomitips.com/guide/miui-deep-flash-engineering-cable-solution-to-non-edl-device/
Please take dfc as last resort. And do research more on this... Do with your own risk. Good luck
Hi,
Yes sorry I have tried updater, I download rom start updater it starts but after about 2 minutes stops and phones shuts down.
I then have to restart phone with long press of power button. It restarts but nothing has changed.
Wrt fastboot it goes into fastboot but this is useless cause no Pc can see my device and if it sees it it sees unknown device, spent countless hours trying different things without any success.
Seems have soft bricked the device, phone works but gets hot and battery life maybe 4 hours if I'm lucky?
Not sure what more today?
DeAntman said:
Hi,
Yes sorry I have tried updater, I download rom start updater it starts but after about 2 minutes stops and phones shuts down.
I then have to restart phone with long press of power button. It restarts but nothing has changed.
Wrt fastboot it goes into fastboot but this is useless cause no Pc can see my device and if it sees it it sees unknown device, spent countless hours trying different things without any success.
Seems have soft bricked the device, phone works but gets hot and battery life maybe 4 hours if I'm lucky?
Not sure what more today?
Click to expand...
Click to collapse
Before this has your pc able to use the miflash ? Try to follow this guide to setup it correctly http://en.miui.com/thread-136188-1-1.html ... I follow this guide and the adb n fastboot even works on an old pentium 4, 512mb ram, win xp laptop.
Ps: I think, its only a matter of incorrect driver setup on your side, best luck.
Hello everyone !
This morning, out of the blue (I think it was during a Whatsapp automatic backup), my Google Pixel 2 XL shut down. I can't get it started and the phone is stuck on the white screen with the Google Logo. I can access the bootloader and Recovery though, so that's something. I spent my whole day skimming through the forum and other websites/videos. but I only have a slight understanding of what is happening and I'm not sure where my problem lays. Now when I click on the Start option in the bootloader, it just starts back in the bootloader screen.
I've been a bad scholar and did not backup my data. So if there is a solution, I'd rather not factory reset my phone.
Got my phone a month ago.
I unlocked the bootloader and rooted the phone (Magisk).
Stock Rom
Today,
I tried to connect my phone to my computer but so far it is not recognised by my computer and I can't access OEM unlocking/usb modes.
I verified. I have the latest adb and fastboot version on my computer, dowloading the latest SDK platforms tools.
I downloaded the usb driver packages from the SDK manager.
I tried using an universal android adb driver tool.
I've used multiple usb-c to usb-c and usb-c to usb-a cables, on different ports.
I restarted my phone and computer multiple times (just to make sure)
My phone doesn't appear in the Device manager.
I am now completely lost and would really much appreciate your help.
Thank you for reading this. Thank you for helping me !
Sounds bad.....maybe in first instance try letting tge device shut off due to low battery. Maybe this helps to hard reset. So just leave it on in fastboot mode
donkeydances said:
Hello everyone !
This morning, out of the blue (I think it was during a Whatsapp automatic backup), my Google Pixel 2 XL shut down. I can't get it started and the phone is stuck on the white screen with the Google Logo. I can access the bootloader and Recovery though, so that's something. I spent my whole day skimming through the forum and other websites/videos. but I only have a slight understanding of what is happening and I'm not sure where my problem lays. Now when I click on the Start option in the bootloader, it just starts back in the bootloader screen.
I've been a bad scholar and did not backup my data. So if there is a solution, I'd rather not factory reset my phone.
Got my phone a month ago.
I unlocked the bootloader and rooted the phone (Magisk).
Stock Rom
Today,
I tried to connect my phone to my computer but so far it is not recognised by my computer and I can't access OEM unlocking/usb modes.
I verified. I have the latest adb and fastboot version on my computer, dowloading the latest SDK platforms tools.
I downloaded the usb driver packages from the SDK manager.
I tried using an universal android adb driver tool.
I've used multiple usb-c to usb-c and usb-c to usb-a cables, on different ports.
I restarted my phone and computer multiple times (just to make sure)
My phone doesn't appear in the Device manager.
I am now completely lost and would really much appreciate your help.
Thank you for reading this. Thank you for helping me !
Click to expand...
Click to collapse
Flash latest factory image (either 8.1 or DPx/P/9.0).
mrorange2108 said:
Sounds bad.....maybe in first instance try letting tge device shut off due to low battery. Maybe this helps to hard reset. So just leave it on in fastboot mode
Click to expand...
Click to collapse
I'm trying that. Thank you !
xFirefly93 said:
Flash latest factory image (either 8.1 or DPx/P/9.0).
Click to expand...
Click to collapse
Thank you for your answer. How would you do that ? I can't get it to be recognized by my computer.
donkeydances said:
Thank you for your answer. How would you do that ? I can't get it to be recognized by my computer.
Click to expand...
Click to collapse
Have you tried with the Fastboot protocol?
xFirefly93 said:
Have you tried with the Fastboot protocol?
Click to expand...
Click to collapse
Like I said, I can't get my phone to be recognized by my computer so no Fastboot protocol. I am not sure why it doesn't get recognized though.
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
kool_am said:
Hey guys. I need some help. this is my wrong doing !!
I got a network unlocked T mobile which I started using with AT&T. Today I received the unlock code from T mobile to unlock bootloader which I did. then I I installed TWRP and Magisk without any issues. then I tried to fix the persis.img coz fingerpritn is not working. it didnt work so I left it alone. But I dont know why I wiped cache, data and then phone got stuck at boot loop. (no backup). I tried to install using MSM tool but it didnt work. MSM tool was not detecting the phone. then in TWRP I clicked on EDL and now the phone screen is blank. tried every possible combination of keys but no luck. was doing all this on windows 10. any help would be greatly appreciated. thanks
Click to expand...
Click to collapse
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
kool_am said:
So it turns out its not a hard brick. I'm stuck on TWRP. I'm able to get to fastboot. I tried to install Oxygen OS thru fastboot but the PC is not detecting the phone in fastboot. Mac detects it but I believe all the stock Roms are for PC use. I did try it on my MAc and was able to open a terminal window inside the Oxygen OS folder but then the fastboot device command is not found. any help would be greatly appreciated. I installed SDK and ADB drivers on PC but in device manager the device still only shows as Android device with no drivers. !! thanks
Click to expand...
Click to collapse
Solved !
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
JCroffut said:
solved how? i greatly would like to know how to flash from fastboot, i know that isnt what this thread was about but im having the exact same problems you are with msm. i can see the phone in fastboot but i have no idea how to flash or what to flash from there. I can get into recovery but i cant copy anything over to the phone and the drivers dont show up for adb. so i pretty much ONLY have fastboot and dont know what to do! 2 days since the phone been down and im lost AF
Click to expand...
Click to collapse
Can msm detect the phone when connected in fastboot. Also check device manager in pc to make sure it detects the phone as qualcomm device. Otherwise msm will not work.
Download msm. Turn phone off. Connect phone to pc. Open msm. Press start. Press volume down and power button on phone. It should be detected by msm and should start flashing the software.
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
JCroffut said:
Standby....
When plugged in the phone in EDL it shows
QUSB_BULK_CID0412 with an exclamation mark inside a yellow triangle
When i plugged in the phone and open fastboot it shows
Android with an exclamation point inside a yellow triangle
I booted up msm, clicked other, clicked start, pressed volume down and volume up and plugged it in. still says waiting for device to connect. ive also tried this with a number of keys being help, ive tried to boot from twrp straight into edl mode, none of which works
which all says to me its a driver issue of some kind, but for 3 days ive been slaving away on xda and cannot for the life of me figure out where to get the drivers.
Click to expand...
Click to collapse
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
kool_am said:
It is a driver issue for sure. When connected device manager should detect as qualcomm hd9008.......
Click to expand...
Click to collapse
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
JCroffut said:
i figured that, i am at a complete loss as to where to find the drivers. i actually might need you to hold my hand on this one a tiny bit because im about to smash the phone on the ground and say someone stole it. thats where i am with this phone haha
Click to expand...
Click to collapse
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
standby ill read through it now. we also have 2 different threads going so i can combine them if thats easier for you
kool_am said:
qualcomm hs-usb qdloader 9008 - this is the exact name of the driver.
Try this link: https://forum.xda-developers.com/t/guide-fixing-hard-bricks-qualcomm-hs-usb-qdloader-9008.3403868/
Click to expand...
Click to collapse
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
kool_am said:
Only download the qualcomm driver from this link. Or search for it online.
I have spent much more time than you trying to figure this out. I have a pc and Mac both. Mac is not compatible with a lot of the software and my pc usb ports are all bad. Point being, leave it alone for a day or so. Come back at it with a fresh start and fresh mind.
Click to expand...
Click to collapse
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
kool_am said:
If I were you, I wouldn't throw the phone away. Like I said it's a simple issue of driver. Install the correct driver and make sure you see it as qualcomm device in device manager. Trust me, from then on, it's just a matter of a few clicks.
I unbricked my phone to t mobile and then converted to global rom without any issues.
Click to expand...
Click to collapse
i sent you a private convo on here if thats ok so i dont spam the forum! You may be able to help me out if i could borrow a few minutes of your time!
JCroffut said:
i hear that. after 3 days of non stop working at it im pretty sure im just not smarter than the phone today lol. looks like this phone is now stolen and going into a trash can lol
Click to expand...
Click to collapse
i was definatly kidding tho this is my only phone and i have to solve this problem lol
I'm not sure if you have read this thread already. I messed up my phone a couple days ago as well and follow the steps there and was able to MSM my phone back to stock.
[OP8][OOS TMO 55CB] Unbrick tool to restore your device to OxygenOS
Disclaimer: By attempting any of the processes listed in this thread you accept full responsibility for your actions. I will not be held responsible if your device stops working, catches fire, or turns into a hipster and claims to have been...
forum.xda-developers.com