Database Info

Help s3 gt i9300

So I rooted and rom my galaxy note just fine even help a friend to recover his note 2.
But another friend try to root or place a rom on his S3 I dont know really and now the samsung galaxy sIII gt I9300 is stock on that logo.
So far I've try the following
Odin3 v3.07
philz_touch_6.07.9-i9300.tar.md5
I get:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1
odin3 v1.85.exe
CF-Root-SG3-V6.1.TAR
DRIVER SW installation is ok
I get:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
odin3 v3.07
I9300UBELL6_I9300UBELL1_I9300CRCELL_1HOME.tar.md5
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBELL6_I9300UBELL1_I9300CRCELL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I had try this one from xda as well:
- Unzip the attached Odin3-vX.X.zip file
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
- NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.
But this last doesn’t work either…

Choko888 said:
So I rooted and rom my galaxy note just fine even help a friend to recover his note 2.
But another friend try to root or place a rom on his S3 I dont know really and now the samsung galaxy sIII gt I9300 is stock on that logo.
So far I've try the following
Odin3 v3.07
philz_touch_6.07.9-i9300.tar.md5
I get:
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.07.9-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1
odin3 v1.85.exe
CF-Root-SG3-V6.1.TAR
DRIVER SW installation is ok
I get:
<ID:0/007> Added!!
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> recovery.img
<ID:0/007> NAND Write Start!!
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
odin3 v3.07
I9300UBELL6_I9300UBELL1_I9300CRCELL_1HOME.tar.md5
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBELL6_I9300UBELL1_I9300CRCELL1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
I had try this one from xda as well:
- Unzip the attached Odin3-vX.X.zip file
- Download and unzip the CF-Auto-Root-....zip file (see posts below this one)
- If you end up with a recovery.img and cache.img file, you've extracted twice. You need to end up with a .tar.md5 file - don't extract that one
- (USB) Disconnect your phone from your computer
- Start Odin3-vX.X.exe
- Click the PDA button, and select CF-Auto-Root-....tar.md5
- Put your phone in download mode (turn off phone, then hold VolDown+Home+Power to boot - if it asks you to press a button to continue, press the listed button, or run adb reboot download command)
- (USB) Connect the phone to your computer
- Make sure Repartition is NOT checked
- Click the Start button
- Wait for Android to boot
- Done (if it took you more than 30 seconds, you need practise!)
- NOTE: Sometimes the device does *not* boot into recovery mode and root your device. Just do the entire procedure again if this happens. If it still will not install root and such, make sure that in Odin "Auto Reboot" is not checked. Then after flashing, pull the battery, and boot with VolUp+Home+Power button to boot into recovery manually. This will start the install process.
But this last doesn’t work either…
Click to expand...
Click to collapse
Which firmware version is actually installed on the S3 ?

firmware
LS.xD said:
Which firmware version is actually installed on the S3 ?
Click to expand...
Click to collapse
I dont know I got the phone only with de dowload option available, but I think should be
PDA: I9300UBEMH2
CSC: I9300ICEEMH1
MODEM: I9300UBEMH1

Choko888 said:
I dont know I got the phone only with de dowload option available, but I think should be
PDA: I9300UBEMH2
CSC: I9300ICEEMH1
MODEM: I9300UBEMH1
Click to expand...
Click to collapse
Use this CF-AUTO-ROOT --> LINK
and the latest TWRP --> LINK
or the latest PhilZ CWM --> LINK
idk where you got your files from, but they are out of date...

LS.xD said:
Use this CF-AUTO-ROOT -->
and the latest TWRP -->
or the latest PhilZ CWM -->
idk where you got your files from, but they are out of date...
Click to expand...
Click to collapse
with the CF auto root I get:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CF-Auto-Root-m0-m0xx-gti9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
and If I try philz
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> philz_touch_6.26.6-i9300.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
twrp:
<ID:0/006> Added!!
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> recovery.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)

Have you tried flashing stock firmware first?
Sent from my beloved HTC One S using (most time buggy) Tapatalk

Good

I try to download at sammobile but it doesn't allow me ...
Sent from my GT-N7000 using XDA Free mobile app

Choko888 said:
I try to download at sammobile but it doesn't allow me ...
Sent from my GT-N7000 using XDA Free mobile app
Click to expand...
Click to collapse
use samsung-updates.com instead

LS.xD said:
use samsung-updates.com instead
Click to expand...
Click to collapse
Thanks I think I left one downloading last night I hope its the same one in samsung updates as soon as I get out of work. I´ try it.

LS.xD said:
use samsung-updates.com instead
Click to expand...
Click to collapse
Now I have a doubt, samsung-updates shows CRC (my country)
Galaxy S 3 (International)GT-I9300 CRC I9300UBELL6 4.1.2 31.12.2012 767276 and the information I pull from sammobile said this
Galaxy S 3 (International)GT-I9300 CRC I9300UBEMH2 and samsung updates doesnt have my country code with the same PDA as sammobile.
Do you think samsung-updates has a diferent code for my country? What should I do? Wich one should I pick ?

Choko888 said:
Now I have a doubt, samsung-updates shows CRC (my country)
Galaxy S 3 (International)GT-I9300 CRC I9300UBELL6 4.1.2 31.12.2012 767276 and the information I pull from sammobile said this
Galaxy S 3 (International)GT-I9300 CRC I9300UBEMH2 and samsung updates doesnt have my country code with the same PDA as sammobile.
Do you think samsung-updates has a diferent code for my country? What should I do? Wich one should I pick ?
Click to expand...
Click to collapse
Which firmware is actually installed?

LS.xD said:
Which firmware is actually installed?
Click to expand...
Click to collapse
I dont know I got the phone only with de dowloading option available, Where can I see it if this is the only state of the phone?...

So try the one I think it was for my country I9300UBEMH2_I9300ICEEMH1_ICE but I get
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300UBEMH2_I9300UBEMH1_I9300ICEEMH1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006> Firmware update start..
<ID:0/006> boot.img
<ID:0/006> NAND Write Start!!
<ID:0/006> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
Since it is international version I try with some firmwares from germany , uk and rusia but it did work either

what does this odin fail log mean?

my reflashing of a stock rom in odin failed, here is the log, please tell me what went wrong
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> BcmCP.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)

Kobro said:
my reflashing of a stock rom in odin failed, here is the log, please tell me what went wrong
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5360XXMI1_S5360XEUMI1_S5360XXMG1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> sbl.bin
<ID:0/007> NAND Write Start!!
<ID:0/007> BcmCP.img
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<ID:0/007> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
It can't write the file to your phones NAND memory, this can usualy be rectified by flashing a PIT file as well to fix any mult-media card corruptions as it will re-partition it.

Thanks, but where do i find a pit file?

How to upadate Nougat to the latest version???

Hello,
i have the DPLT nougat firmware and I want to update to the latest one. The only option is using Odin? Can I do it thru zip file?
I have twrp. Will I nee to put it again, and root, and clean the data partition and everything...?
Thanks

dari-woka said:
Hello,
i have the DPLT nougat firmware and I want to update to the latest one. The only option is using Odin? Can I do it thru zip file?
I have twrp. Will I nee to put it again, and root, and clean the data partition and everything...?
Thanks
Click to expand...
Click to collapse
Check for OTA update first from settings menu If that does not work, flash "HOME_CSC" from the new firmware via Odin and your data should not be affected.

mrd0pe said:
Check for OTA update first from settings menu If that does not work, flash "HOME_CSC" from the new firmware via Odin and your data should not be affected.
Click to expand...
Click to collapse
thanks for the answer, but it does not update the system when I check it on the phone
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)

dari-woka said:
thanks for the answer, but it does not update the system when I check it on the phone
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Added!!
<ID:0/008> Odin engine v(ID:3.1203)..
<ID:0/008> File analysis..
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Set PIT file..
<ID:0/008> DO NOT TURN OFF TARGET!!
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> SingleDownload.
<ID:0/008> cache.img
<ID:0/008> hidden.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
Click to expand...
Click to collapse
My bad, I guess i wrote that reply a little too fast.. It's the AP file you should flash.

sm-j415f software bricked!keep restarting only

sm-j415f keep restarting.cannot enter recovery.download mode ok.i tried to flash below firmware.i use odin 3.14.1 but not fixed.
1.J415FXXU5BSL1
2.J415FXXU6BTB3
3.COMBINATION_FAC_FA81_J415FXXU4ASG2_FACFAC_CL14376089_QB24592148_REV00_user_mid_noship_MULTI_CERT.tar.md5
4.COMBINATION_FAC_FA81_J415FXXU5ASK1_FACFAC_CL14376089_QB27234897_REV00_user_mid_noship_MULTI_CERT.tar
after i flash abow all firmwares, i saw this common error message in phone screen and odin.
Phone screen say- (Secure check fail:sbl1 )
Odin say -
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 1881 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
.

geeth rb said:
sm-j415f keep restarting.cannot enter recovery.download mode ok.i tried to flash below firmware.i use odin 3.14.1 but not fixed.
1.J415FXXU5BSL1
2.J415FXXU6BTB3
3.COMBINATION_FAC_FA81_J415FXXU4ASG2_FACFAC_CL14376089_QB24592148_REV00_user_mid_noship_MULTI_CERT.tar.md5
4.COMBINATION_FAC_FA81_J415FXXU5ASK1_FACFAC_CL14376089_QB27234897_REV00_user_mid_noship_MULTI_CERT.tar
after i flash abow all firmwares, i saw this common error message in phone screen and odin.
Phone screen say- (Secure check fail:sbl1 )
Odin say -
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Added!!
<ID:0/007> Odin engine v(ID:3.1401)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 1881 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
.
Click to expand...
Click to collapse
Use odin 3.13.1, the one your using is for android 10 and above.

respectablenoob said:
Use odin 3.13.1, the one your using is for android 10 and above.
Click to expand...
Click to collapse
i used odin 3.13.1.but fail.same result showing odin and phone screen

Make sure your csc and cp is exactly the same model as your phone for your region. Search your firmware+ your region. And if everything doesnt work, dont put the other files, just the AP file.
---------- Post added at 05:52 PM ---------- Previous post was at 05:51 PM ----------
geeth rb said:
i used odin 3.13.1.but fail.same result showing odin and phone screen
Click to expand...
Click to collapse
Make sure your csc and cp is exactly the same model as your phone for your region. Search your firmware+ your region. And if everything doesnt work, dont put the other files, just the AP file.

samsung sm-j415f security error/// pls can i get solutions for this?

Need assistance please on combination flash, PIT, etoken - Note 10 (SM-N970U)

Good day to all,
I've been trying to flash into Combination with no success at all. Tried several methods to no avail. Can some OG's please help me.
Phone model : Samsung note 10 (SM-N970U)
i had all the required combination flash file and the PIT file as well. When i try to flash it shows :
SW REV CHECK FAIL : [abl]Fused 5 > Binary 1 (on my phone)
Odin Log :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 3963 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> abl.elf
<ID:0/007> xbl.elf
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Darklord888 said:
Good day to all,
I've been trying to flash into Combination with no success at all. Tried several methods to no avail. Can some OG's please help me.
Phone model : Samsung note 10 (SM-N970U)
i had all the required combination flash file and the PIT file as well. When i try to flash it shows :
SW REV CHECK FAIL : [abl]Fused 5 > Binary 1 (on my phone)
Odin Log :
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin engine v(ID:3.1301)..
<ID:0/007> File analysis..
<ID:0/007> Total Binary size: 3963 M
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> NAND Write Start!!
<ID:0/007> SingleDownload.
<ID:0/007> abl.elf
<ID:0/007> xbl.elf
<ID:0/007> FAIL! (Auth)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
AFAIK the SM-N970U has a locked bootloader. That prevents flashing another firmware files.
If you want to flash other firmware files, you either need to get the bootloader unlocked (what is not that easy so some devices and not available at all for others), or better get an unlocked device.