Original, k1 root? confused. - Shield Tablet Q&A, Help & Troubleshooting

Hi,
I have a replaced 32gb LTE with B01 battery.
Is this called original Shield in the forums?
If i want to root it and perhaps install twrp and a custom rom i can't follow K1 guides?
thanks.

Yes, that's called the "Original" here. But you can follow the k1 guides here since the hardware is virtually identical and twrp and roms work on both model. For rooting the stock rom I would use cf-autoroot.

How to just enable root permission? No ROM change.

Niii4 said:
How to just enable root permission? No ROM change.
Click to expand...
Click to collapse
I followed this guide.
I did download the latest twrp instead of the one in the guide.
Note that when fastboot oem unlock everything is ereased from the tablet, it is doing a factory reset.
http://forum.xda-developers.com/shield-tablet/general/complete-guide-shield-tablet-k1-root-t3315965

Niii4 said:
How to just enable root permission? No ROM change.
Click to expand...
Click to collapse
Didn't you read? Use CF-Autoroot

i did unlock my bootloader, flashed TWRP and flashed then over twrp latest SuperSu.zip. That 's all

edisso10018 said:
Yes, that's called the "Original" here. But you can follow the k1 guides here since the hardware is virtually identical and twrp and roms work on both model. For rooting the stock rom I would use cf-autoroot.
Click to expand...
Click to collapse
Factory images work on both models too?
Enviado desde mi Nexus 6P mediante Tapatalk

No.

Related

[Q] Dev Edition, Unlocked Bootloader Root Question

Hey uys, first off if this is a dupe, my bad. I did a bit of searching and couldnt find a topic that addressed this question specifically for the droid maxx DE.
I have my DE on 4.2.2, never took any updates. I have since unlocked the bootloader, and am rooted.
I wanted to know if rooting this phone with bootloader unlocked was as simple as installing supersu or superuser from the play store? I have heard that with an unlocked bootloader there is no additional steps needed (such as rock/pwn mymoto etc). Can anyone confirm that this is true?
Also does the same apply with KitKat? Am I simply able to root by installing supersu since my bootloader is unlocked?
Thank you and appreciate the help.
asuhoops8628 said:
Hey uys, first off if this is a dupe, my bad. I did a bit of searching and couldnt find a topic that addressed this question specifically for the droid maxx DE.
I have my DE on 4.2.2, never took any updates. I have since unlocked the bootloader, and am rooted.
I wanted to know if rooting this phone with bootloader unlocked was as simple as installing supersu or superuser from the play store? I have heard that with an unlocked bootloader there is no additional steps needed (such as rock/pwn mymoto etc). Can anyone confirm that this is true?
Also does the same apply with KitKat? Am I simply able to root by installing supersu since my bootloader is unlocked?
Thank you and appreciate the help.
Click to expand...
Click to collapse
It IS simple but not as simple as that. After you unlock you need to flash TWRP, after that in the bootloader menu boot recovery then reboot from recovery and it will ask if you want to install Su, swype to to that and then you're rooted. The same method applies to KitKat.
BladeRunner said:
It IS simple but not as simple as that. After you unlock you need to flash TWRP, after that in the bootloader menu boot recovery then reboot from recovery and it will ask if you want to install Su, swype to to that and then you're rooted. The same method applies to KitKat.
Click to expand...
Click to collapse
I take it same applies if using cwm or other recovery
asuhoops8628 said:
I take it same applies if using cwm or other recovery
Click to expand...
Click to collapse
in theory, yes. I've had an issue with getting root to stick using CWM touch. If you use a recovery other than TWRP and it doesn't work you can always root using TWRP then flash your recovery of choice after.
What is correct CWM recovery for xt1080 ?
I am looking here:
http://clockworkmod.com/rommanager
and here:
http://goo.im/devs/cm
I dont see any of xt1080, or Droid Ultra/Maxx/Mini.
I have a Dev Ed xt1080
On philz site:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition
there is only "moto_msm8960" and no "moto_msm8960dt".
Help
the msm_8960dt is the one you need as i am using the same thing since i have the dev edition also
happysteve11c said:
the msm_8960dt is the one you need as i am using the same thing since i have the dev edition also
Click to expand...
Click to collapse
Thank you for your reply. I know the "dt" version ROM is for this phone, but that isn't the question.
My question is: What is the correct CWM recovery for this phone? Where do I find it?
Thanks
http://forum.xda-developers.com/showthread.php?t=2543400
http://skrilax.droid-developers.org/xt1080/open_recovery_209_25_11_2013.img
asuhoops8628 said:
Hey uys, first off if this is a dupe, my bad. I did a bit of searching and couldnt find a topic that addressed this question specifically for the droid maxx DE.
I have my DE on 4.2.2, never took any updates. I have since unlocked the bootloader, and am rooted.
I wanted to know if rooting this phone with bootloader unlocked was as simple as installing supersu or superuser from the play store? I have heard that with an unlocked bootloader there is no additional steps needed (such as rock/pwn mymoto etc). Can anyone confirm that this is true?
Also does the same apply with KitKat? Am I simply able to root by installing supersu since my bootloader is unlocked?
Thank you and appreciate the help.
Click to expand...
Click to collapse
its pretty easy. see my thread here: http://forum.xda-developers.com/showthread.php?t=2645122
install TWRP and thats all.

[Q] simple root/upgrade question

Hi. Been out the loop for a while and struggling to find the answer to my question.
I'm on 4.4.4 no custom revovery but with root.
I have an OTA notice to go to lollipop, which should be fine, as I have stock evetything?
How do I simply get root back afer the update?
So many posts with options, I'm struggling to find the right answer.
Unlock bootloader, and then either use cf-autoroot or flash latest SuperSU BETA through twrp.
beekay201 said:
Unlock bootloader, and then either use cf-autoroot or flash latest SuperSU BETA through twrp.
Click to expand...
Click to collapse
Thanks, bootloader is already unlocked. I don't really want to install any custom recoveries, so the cf-autoroot sounds like the way to go.
Do you have a link for how to use this method?
Here you go http://autoroot.chainfire.eu/
Sent from my Nexus 5 using Tapatalk
teapea said:
Thanks, bootloader is already unlocked. I don't really want to install any custom recoveries, so the cf-autoroot sounds like the way to go.
Do you have a link for how to use this method?
Click to expand...
Click to collapse
to use a custom recovery you don't need to flash it.. just boot it.
'fastboot boot whatever_custom_recovery_you_want.img'

Root? Kingroot?

What's going on with kingroot for Xperia z3 lolipop 5.1.1? There is a date for available kingroot for this version?
No there isn't. Kingroot only supports 5.0 not 5.1 You could always flash 5.0.2, root with kingroot then flash a pre-rooted 5.1.1
heywheelie said:
No there isn't. Kingroot only supports 5.0 not 5.1 You could always flash 5.0.2, root with kingroot then flash a pre-rooted 5.1.1
Click to expand...
Click to collapse
I did it but when I updated to 5.1.1 the Root was deleted
DANIELTZ19 said:
What's going on with kingroot for Xperia z3 lolipop 5.1.1? There is a date for available kingroot for this version?
Click to expand...
Click to collapse
No date available...
I'm waiting for it too :crying:
DANIELTZ19 said:
I did it but when I updated to 5.1.1 the Root was deleted
Click to expand...
Click to collapse
Did you flash a stock 5.0.2, then root with kingroot, install the latest dual recovery from PC, boot to recovery, do a complete wipe then flash a pre-rooted 5.1.1 from recovery. It should work. I tried it here, worked perfectly.
BTW make sure you put the pre-rooted 5.1.1 on your sdcard before you start so once you go into recovery to do a full wipe you don't reboot until you flash the pre-rooted 5.1..1
heywheelie said:
Did you flash a stock 5.0.2, then root with kingroot, install the latest dual recovery from PC, boot to recovery, do a complete wipe then flash a pre-rooted 5.1.1 from recovery. It should work. I tried it here, worked perfectly.
BTW make sure you put the pre-rooted 5.1.1 on your sdcard before you start so once you go into recovery to do a full wipe you don't reboot until you flash the pre-rooted 5.1..1
Click to expand...
Click to collapse
I don't install pre-rooted 5.1.1 because it needs to Recovery .. and I don't want to do a recovery in my device .... i just Burning a normal version of 5.1.1
DANIELTZ19 said:
I don't install pre-rooted 5.1.1 because it needs to Recovery .. and I don't want to do a recovery in my device .... i just Burning a normal version of 5.1.1
Click to expand...
Click to collapse
Then just delete the recovery after you have flashed the pre rooted 5.1.1. The ramdisks are in the system partition.
gregbradley said:
Then just delete the recovery after you have flashed the pre rooted 5.1.1. The ramdisks are in the system partition.
Click to expand...
Click to collapse
If I do now Recovery then it deletes all my stuff in the cell phone .. other than that it will lose my warranty and it might make my cell phone issues
DANIELTZ19 said:
If I do now Recovery then it deletes all my stuff in the cell phone
Click to expand...
Click to collapse
It should not do that if you do it properly. You only lose stuff in your phone if you unlock the bootloader and you do not need to do that. Also, making a backup of things you want to keep is always a good idea.
DANIELTZ19 said:
.. other than that it will lose my warranty and it might make my cell phone issues
Click to expand...
Click to collapse
No you will not lose warranty if you follow the locked bootloader tutorial. You do not need to unlock the bootloader to install recovery and flash a pre-rooted 5.1.1
Please take a moment to look through any of the multiple guides in the general section to see how to do this
gregbradley said:
It should not do that if you do it properly. You only lose stuff in your phone if you unlock the bootloader and you do not need to do that. Also, making a backup of things you want to keep is always a good idea.
No you will not lose warranty if you follow the locked bootloader tutorial. You do not need to unlock the bootloader to install recovery and flash a pre-rooted 5.1.1
Please take a moment to look through any of the multiple guides in the general section to see how to do this
Click to expand...
Click to collapse
Okay, thank you very much, but there will be no hacking with "Kingroot"? This is the most easy and simple ..
DANIELTZ19 said:
Okay, thank you very much, but there will be no hacking with "Kingroot"? This is the most easy and simple ..
Click to expand...
Click to collapse
Kingroot will send your IMEI to an IP address in china, I do not recommend it. Downgrade and use giefroot, install dual recovery, flash a pre rooted 5.1.1, then delete the recovery if you want, but I do not see why you would do this.
gregbradley said:
Kingroot will send your IMEI to an IP address in china, I do not recommend it. Downgrade and use giefroot, install dual recovery, flash a pre rooted 5.1.1, then delete the recovery if you want, but I do not see why you would do this.
Click to expand...
Click to collapse
Because that everyone I know who did Recovery then it's destroyed a lot of things on the device ..
DANIELTZ19 said:
Because that everyone I know who did Recovery then it's destroyed a lot of things on the device ..
Click to expand...
Click to collapse
You are confusing recovery with losing drm keys when unlocking the bootloader.
I have never come across anyone who has recovery installed correctly and used correctly who has had problems like that
@DANIELTZ19
If you're worried and want another opinion then my advice is that everything GregBradley has stated is correct. His method is also the safest and reliable with an excellent tutorial in the General forum. Read it http://forum.xda-developers.com/z3/general/guide-rootrecovery-how-to-root-install-t3017056
cheers

How to root 6.0.1

Everything is in the title how to root an updated to marshmallow 6045i.
Thanks
wiwild said:
Everything is in the title how to root an updated to marshmallow 6045i.
Thanks
Click to expand...
Click to collapse
Just flash this Supersu
https://download.chainfire.eu/751/SuperSU/
other versions not works
Alek Dev said:
Just flash this Supersu
https://download.chainfire.eu/751/SuperSU/
other versions not works
Click to expand...
Click to collapse
So just to clarify, I have a 6045I factory global unlocked from Amazon, It has never been rooted, bootloader unlocked, nothing. So would I place on SD and apply update through stock recovery, or is there a different method? Really just want root for adaway and xposed. TWRP would be nice, but not necessary. Just don't want a new paperweight. Thanks!
Can i install twrp to flash thid or stock is fine?
You can try windroid toolkit v3.1.
First u have to unlock bootloader then to flash recovery and supersu .
For me it is not recognising my phone hope u will get success.
If try then pls share ur experience.
yash_rathore25 said:
You can try windroid toolkit v3.1.
First u have to unlock bootloader then to flash recovery and supersu .
For me it is not recognising my phone hope u will get success.
If try then pls share ur experience.
Click to expand...
Click to collapse
I downloaded twice, and twice got security that windroid 3.1 has trojan, and was quarantined!?!
dongarritas said:
I downloaded twice, and twice got security that windroid 3.1 has trojan, and was quarantined!?!
Click to expand...
Click to collapse
For me it got downloaded but showing device either offline or unauthorized
I'd run a full virus /malware scan.... I use 360 Security on mobile devices and PC's. It, along with SUPERAntiSpyware has served me well.
Sent from my LG-H631 using Tapatalk
Just install the TWRP 3.0 in android development (it has instructions in the thread) and then you can flash the supersu mentioned.
famewolf said:
Just install the TWRP 3.0 in android development (it has instructions in the thread) and then you can flash the supersu mentioned.
Click to expand...
Click to collapse
Bro,
They also on locked bootloader with no fastboot commands working like me.
yash_rathore25 said:
Bro,
They also on locked bootloader with no fastboot commands working like me.
Click to expand...
Click to collapse
Well the obvious choices are:
1) Use mobile Q to restore to 5.0.2...unlock bootloader, install twrp....upgrade to marshmallow using the modified update.zip that doesn't wipe recovery and finally root using the file mentioned.
or
2) Live with it as it is until someone figures out how to restore fastboot which will probably still require downgrading.
famewolf said:
Well the obvious choices are:
1) Use mobile Q to restore to 5.0.2...unlock bootloader, install twrp....upgrade to marshmallow using the modified update.zip that doesn't wipe recovery and finally root using the file mentioned.
or
2) Live with it as it is until someone figures out how to restore fastboot which will probably still require downgrading.
Click to expand...
Click to collapse
I am waiting some days otherwise i will downgrade
BTW my device is recognized in fastboot but commands not working. It means fastboot is working but commands have been changed
dongarritas said:
So just to clarify, I have a 6045I factory global unlocked from Amazon, It has never been rooted, bootloader unlocked, nothing. So would I place on SD and apply update through stock recovery, or is there a different method? Really just want root for adaway and xposed. TWRP would be nice, but not necessary. Just don't want a new paperweight. Thanks!
Click to expand...
Click to collapse
The root install it with TWRP !
Alek Dev said:
The root install it with TWRP !
Click to expand...
Click to collapse
That's the problem. This phone is totally stock with nothing done but the update. I literally charged it, turned it on and 20 minutes later 6.0.1 was nagging for install, which I did. There is now the OEM unlock switch in developing options, but I don't know where to start, or flash.
Sent from my LG-H631 using Tapatalk
dongarritas said:
That's the problem. This phone is totally stock with nothing done but the update. I literally charged it, turned it on and 20 minutes later 6.0.1 was nagging for install, which I did. There is now the OEM unlock switch in developing options, but I don't know where to start, or flash.
Sent from my LG-H631 using Tapatalk
Click to expand...
Click to collapse
You must go back to 5.0 to install and then update it because in 6.0.1 update Removes Fastboot commands so you can't install it twrp....
I have a problem with rooting 6039Y on rom 6.0.1 by persona78. Stock rom 5.0.2 and root working fine. When i flash via TWRP after the update to MM i get this message:
-Cheking patch status
---Already patched, attempting to find stock backup
---Stock restore failed, attempting ramdisk restore
---Ramdisk restore failed, aborting
This solution - echo SYSTEMLESS=true >> /data/.supersu - not working.
Phone was simlock removed via furiousgold, maybe this is a problem?
Alcatel one touch idol 3 (5.5) 6045Y
i have this model Alcatel one touch idol 3 (5.5) 6045Y
full unlocked with unlocked bootloader and sim free (single sim model) with 6.0.1 from alcatel not updated to 6.0.1 already i got with 6.0.1 from alcatel (i know you will say "but that phone has 5.0 and updated to 6.0.1 trough a phone update online" But it is not updated ,phone came directly from factory and how i can root this device if there is any help.
Still no solution to rooting stock MM 6045I?
Hope this helps someone
I know this thread is dead, but replying so people can find the information easier.
I used this guide to flash twrp then used twrp to root on stock 6045O 6.0.1.

Rooting on Android 10

Hi, Im new in this forum, just got my OP 7 Pro. I've been away from anything root related for a long time, since my previous devices couldnt be rooted.
I remember using magisk when it was a new thing, and everyone was using greenify to extend battery life.
I just updated to Android 10 Beta, can I root my device?
If it is possible, what do I lose if I root besides widevine?
The only thing I'm really looking forward is gcam port and the use of aux cams, since a lot of things have to be updated to Android 10, I don't think there's a lot to do right now besides that.
I think you have to come back to the android p stable, root, install the twrp and after you will able to update with the root. Now im on the beta with root and twrp throw a dirty installing
vuoshino said:
I think you have to come back to the android p stable, root, install the twrp and after you will able to update with the root. Now im on the beta with root and twrp throw a dirty installing
Click to expand...
Click to collapse
Hi! Thanks. If you don't mind, can you give point me to a guide or something to downgrade? I'm a total noob with everything OnePlus related.
You don't have to downgrade to Pie.
Do it like this:
https://forum.xda-developers.com/oneplus-7/how-to/guide-how-to-flash-android-10-twrp-t3964131
You just need stock boot.img:
https://forum.xda-developers.com/on...isk-patched-boot-image-oneplus-7-pro-t3964345
There's also another way which avoids to downgrade.
Flash the magisk patched img you'll find in this forum.
After following instructions from there, you'll be rooted but without TWRP.
If you need that also... flash the TWRP installer zip as a magisk module, reinstall magisk (direct install), reboot and you're done.
Inviato dal mio GM1913 utilizzando Tapatalk
tidschi said:
You don't have to downgrade to Pie.
Do it like this:
https://forum.xda-developers.com/oneplus-7/how-to/guide-how-to-flash-android-10-twrp-t3964131
You just need stock boot.img:
https://forum.xda-developers.com/on...isk-patched-boot-image-oneplus-7-pro-t3964345
Click to expand...
Click to collapse
Wow, thanks!! that seems stupidly easy, even for me. Two questions:
Do I need a PC to do the extraction?
Will this wipe any data?
And as for my initial question, is there anything besides widevine lost when rooting?
donelwero said:
Wow, thanks!! that seems stupidly easy, even for me. Two questions:
Do I need a PC to do the extraction?
Will this wipe any data?
And as for my initial question, is there anything besides widevine lost when rooting?
Click to expand...
Click to collapse
You can download Magisk patched boot.img from second link above.
Flashing boot.img will not wipe any data.
If I remember right, Widevine will get L3 with unlocked bootloader.
tidschi said:
You can download Magisk patched boot.img from second link above.
Flashing boot.img will not wipe any data.
If I remember right, Widevine will get L3 with unlocked bootloader.
Click to expand...
Click to collapse
Awesome!! Thank you very much, thought I had to unlock the bootloader by myself using a PC.
Edit: I'm so dumb, just realized I still have to flash the boot.img using fastboot
I have a question, in order to root and flash twrp coming with android 10 (no root) I must unlock the bootloader, right?
littlejonny17 said:
I have a question, in order to root and flash twrp coming with android 10 (no root) I must unlock the bootloader, right?
Click to expand...
Click to collapse
Yes bootloader must be unlocked to flash TWRP or Root the device also when you unlock the bootloader it will factory reset the device so make sure you backup any personal data you need before unlocking.
Thank you

Categories

Resources