Related
Hi all you wizards,
I had this now brick rooted and jiggling around it with uninstalling some preinstalled apps, but when I attempted to replace some fonts which was my main goal, it turned out that it was not really rooted!!! probably the rooting method and app was malicious. Then none of the apps could fully root it. Z4root followed by Superoneclick and Universalandroot have been tried, no chance but slow and unstable device. finally I decided to master reset. After this, a strange virus like fake warning sticks to the screen saying the battery cover is open and asking to restart! when I really open the cover another warning comes up that battery cover removed. phone is working in background. It responds to USB connection, even detects an update of ROM I copied to solve the problem but no chance.
Has anybody any idea to get it back to life by using PC as there is no direct interactions with the phone coz of the virus?
basically I prefer to get rid of the virus through SDK and ADB if possible although I am a mushroom and Dono how.
Is it possible to wipe off some infected data or I have to wash out all the ROM and install a new one?
I have another phone handy exactly the same thing, should I copy all data from other one to this one or the update version of original ROM would work?
it is Garmin Asus A50 nuvifone with built in full GPS and navigator; 256 ROM, 256 RAM, 600 MHtz CPU, ARMv6, android 2.1 update 1
Thanks so much in advance for any participation even your experiences without useful result
here is some more information about the matter;
I needed to install some fonts for other languages which are not supported by android
So I tried to use information and files to get my device rooted and replace some fonts in system/fonts directory and some files in system/lib directory to use other languages in my android.
1- I started with Z4root , I downloaded through device and installed it, and I uninstalled my antivirus as it always said it is not safe, so I activated USB debugging and then permanent root and I had the super user. I installed some apps and used them to uninstall some preinstalled app and similar issues. When I tried to replace fonts and files, my file explorer with root ability, it said I don’t have enough authorization or something to access the file, I tried more root file explorer but same result, even a root checker said my device is not rooted!
2- Then I tried UniversalAndroot-1.6.2-beta5. Again I downloaded it through my device browser but it could not help as it said fails! I thought it is because of Z4root so I uninstalled Z4root but failed to root again.
3- I wanted to use pc method and root my phone by PC, even though this method was for android ginger bread and not my brand but as much as tried, my device did not show a recovery mode in start up by pressing power button and volume key but when I pressed middle key of arrow keys went to safe mode. so I ignored it.
4- Finally I downloaded the oneclick app through my device from the net. It was a zip file with so many files and super user, I just installed superuser but not helpful to replace font, then uninstalled.
5- Again installed Z4root but my phone was freezing and unstable so decided to master reset to factory setting. I did it once but after reset, nothing changed so I did it again. This time a warning sticks on the screen says;
” close the battery cover, and restart the device to complete first time set up.”
and asks for restart.
There should be something wrong as when I really open the battery cover, another warning comes up and says; battery cover removed!
Phone is working in background, even I copied a factory update of my ROM and its been detected but the crazy warning does not let to do anything but restart!
Now I need help to show me how I can use my PC to reset my device as upon a usb connection it asks for interaction and lets me to work via usb cable, and then how I can go to recovery mode in start up?
Otherwise it is a brick, lol
it does not let me to do any interaction cause of the crazy warning. it asks for restart, thats all I can do, or other warnings like asking to do update or usb connection option or battery cover removed, but no more. it means I can not activate usb debugging if needed or follow update process through mobile UI. besides in this kind of phone there is no recovery mode but just something like "USB polling mode" and "safe mode." the warning is in safe mode too and I dono how to use "USB polling mode".
however the only option is ADB, and I do not have an backup of the rom but another simillar phone to make copy or the update file, if possible to copy them via ADB which I am dono how; like which commands and where to copy them?
honestonline said:
it does not let me to do any interaction cause of the crazy warning. it asks for restart, thats all I can do, or other warnings like asking to do update or usb connection option or battery cover removed, but no more. it means I can not activate usb debugging if needed or follow update process through mobile UI. besides in this kind of phone there is no recovery mode but just something like "USB polling mode" and "safe mode." the warning is in safe mode too and I dono how to use "USB polling mode".
however the only option is ADB, and I do not have an backup of the rom but another simillar phone to make copy or the update file, if possible to copy them via ADB which I am dono how; like which commands and where to copy them?
Click to expand...
Click to collapse
same situation, no solution ???
ogabic said:
same situation, no solution ???
Click to expand...
Click to collapse
solution for this?
http://kazzi.net/tips-tricks/revive...r-deadly-close-the-battery-cover-message.html
found this but dont know how to adb .
but for sure on giving a missed call and following the idea in link u can use the phone but annoying error wont go away
I have the same problem but I cannot receive calls
Hello
A couple days ago I got a Garminfone from a friend, I use it mostly as a GPS only, because T-Mobile does not have any coverage in my country and I don't have the unlock code.
Yesterday I wanted to make a hard reset to start over, holding the D-pad left while powering on the phone, **WIPE USERDATA** appeared on the screen.
Everything was fine until it restarted, after the restart it showed the following warning: "Close the battery cover, and restart the device to complete first-time setup", the battery cover is closed and it does not let me do anything, the official ROM update does not install and If I do another hard reset the error persist and the phone does not make or receive calls.
Before this issue I got it rooted using z4root
Is it there anyway to update the device without using the update launcher from the phone?, or reinstall the 2.1 update using the usb cable via command prompt or any tool?.
I just want to get rid of this error and keep using the device as a regular GPS
Anyone can help?
I really appreciate any help you can provide.
Im trying to access the data on a Galaxy S4 on which the screen is not working at all(no backlight and doesn't respond to touch). the data I mainly require is the contacts.db file. what I have tried sofar:
1. tried to access the data via USB but cant access the content due to the lock on the phone.
2. tried to access the data with KIES but once again failed to do so due to the lock on the phone.
3. Downloaded the ADB shell and installed the required USB drivers but cant access the phone, when running the command "adb devices" it says no devices found which I think is because the USB Debugging setting on the phone is not enabled.
4. Also tried to sync with the Google account but unfortunately it was not setup to sync contacts with the Google account.
Some other suggestions were to get another S4 and connect its screen to the the one in question which im sure will work but is there no other way to access the data or to somehow remove the pattern lock from the phone? maybe using another platform to gain full access to the phone or anything?
Hello, and welcome to XDA Assist! You may want to try this tool: [Tool][Windows] Control a device with a broken screen, or possibly use a programme such as Droid Explorer to view your files. If all fails, try and ask here: General discussion Questions and Answers. You will need to register to post.
Good luck!
I'm working on an ADB port which allows ADB(client/server) to run directly on Android device.
The app allows you to connect your phone to another Android device via USB OTG and perform some tasks that you normally perform from your PC(that has ADB installed).
For example
- take screenshots
- check logs
- install/remove packages
- check running processes
- push/pull files (also from locations that are not available to regular apps)
- run shell scripts executed as privileged ADB user
- create ADB backups and inspect backup files
- copy apps/APKs between phones
It's still work in progress(even though it's published), and I'm not even sure what features of ADB I should make available through the UI.
I was hoping to get some feedback here.
What are the main issues with UI? (because adb has so many features, I found it extremely hard to pack it into UI that would be intuitive)
What features would you expect from this kind of app?
Should I also embed fastboot, so that users would be able to flash Android from phone to phone?
Is it even worth to work on another one of these apps? (Maybe most people just prefer to always use ADB features directly from PC)
Bugjaeger Mobile ADB - Develop & Debug via USB OTG
Google play link: https://play.google.com/store/apps/details?id=eu.sisik.hackendebug
Update
I also ported Fastboot - user should be able to execute fastboot commands
Thanks
Correct me if I'm wrong, but can't you use a local terminal to execute certain commands?
SaadatM said:
Correct me if I'm wrong, but can't you use a local terminal to execute certain commands?
Click to expand...
Click to collapse
Not sure if I understand what you mean with "local terminal". .. Do you mean a shell spawned from regular app running on your phone?
The point of the app is to perform some privileged tasks that cannot be performed by regular apps on non-rooted phone.
You should be able to perform these tasks without the need to install ADB on your PC, or even without having a pc currently at your hands(e.g., if you're on-the-go).
Additionally, you should be able to perform a lot of these tasks with a couple of taps (instead of typing shell commands).
Is it possible to connect to localhost (127.0.0.1), and issue adb commands to the device running this app?
crunchybutternut said:
Is it possible to connect to localhost (127.0.0.1), and issue adb commands to the device running this app?
Click to expand...
Click to collapse
It's actually doing the opposite.
You issue commands from app to the connected device. The app is running the adb components you are running on your pc.
You connect one device that runs the app to another device that you want to debug. You can connect the devices via Wi-Fi or USB OTG.
bugjaeger said:
It's actually doing the opposite.
You issue commands from app to the connected device. The app is running the adb components you are running on your pc.
You connect one device that runs the app to another device that you want to debug. You can connect the devices via Wi-Fi or USB OTG.
Click to expand...
Click to collapse
I get that is the purpose, I was just curious if it was possible to point at the same device. It would make ADB stuff much simpler when no other devices are available.
I get that is the purpose, I was just curious if it was possible to point at the same device. It would make ADB stuff much simpler when no other devices are available.
Click to expand...
Click to collapse
If you made adbd listen on specific port before(adb tcpip 5555), then yes, you can issue adb commands from the app to the same device running the app.
bugjaeger said:
If you made adbd listen on specific port before(adb tcpip 5555), than yes, you can issue adb commands from the app to the same device running the app.
Click to expand...
Click to collapse
I believe you'd need root to do that though, right?
crunchybutternut said:
I believe you'd need root to do that though, right?
Click to expand...
Click to collapse
No, I don't think you need root. I used it a lot on my non-rooted Nexus 5x and once on an old Asus Zenfone during testing and it was working as expected.
That's great . I was just wondering if there was something like this already out there. Thanks for your efforts and I hope you are prosperous.
bugjaeger said:
I'm working on an ADB port which allows ADB(client/server) to run directly on Android device.
The app allows you to connect your phone to another Android device via USB OTG and perform some tasks that you normally perform from your PC(that has ADB installed).
For example
- take screenshots
- check logs
- install/remove packages
- check running processes
- push/pull files (also from locations that are not available to regular apps)
- run shell scripts executed as privileged ADB user
- create ADB backups and inspect backup files
It's still work in progress(even though it's published), and I'm not even sure what features of ADB I should make available through the UI.
I was hoping to get some feedback here.
What are the main issues with UI? (because adb has so many features, I found it extremely hard to pack it into UI that would be intuitive)
What features would you expect from this kind of app?
Should I also embed fastboot, so that users would be able to flash Android from phone to phone?
Is it even worth to work on another one of these apps? (Maybe most people just prefer to always use ADB features directly from PC)
Bugjaeger Mobile ADB - Develop & Debug via USB OTG
Google play link: play.google.com/store/apps/details?id=eu.sisik.hackendebug
Update
I've added the possibility to copy apps/APKs between phones
Thanks
Click to expand...
Click to collapse
I have a question about this app. I have installed it and find a few over internet connections (android box, fire tv) but when i connect my wifes non rooted S9 snapdragon. It asks what i want to use visa otg cable. (Smartswitch ect..)
Maybe the best way to put this is to tell you want i want to do.
I have a rooted note 5 and my wife has a new non rooted S9 from T mobile. The bloatware sucks as i am sure you can imagine. I have read how to remove the bloat with package disabler without root. My issues is i need to make PIP a sister app for package disabler a device owner app. This is done through adb and a few simple commands. My problem to solve my issue is i have no PC in order to use ADB on. I have looked for way to use phone to phone ADB with OTG but never been able to put ADB on my note 5 to use the terminal like from a PC.
Any help would be great thanks.
lodk said:
I have a question about this app. I have installed it and find a few over internet connections (android box, fire tv) but when i connect my wifes non rooted S9 snapdragon. It asks what i want to use visa otg cable. (Smartswitch ect..)
Maybe the best way to put this is to tell you want i want to do.
I have a rooted note 5 and my wife has a new non rooted S9 from T mobile. The bloatware sucks as i am sure you can imagine. I have read how to remove the bloat with package disabler without root. My issues is i need to make PIP a sister app for package disabler a device owner app. This is done through adb and a few simple commands. My problem to solve my issue is i have no PC in order to use ADB on. I have looked for way to use phone to phone ADB with OTG but never been able to put ADB on my note 5 to use the terminal like from a PC.
Any help would be great thanks.
Click to expand...
Click to collapse
So you tried to connect your phone (with Bugjaeger installed) to you wife's phone via USB OTG cable? And the phone with Bugjaeger app doesn't detect any ADB device connection (or other dialogs pop up)? Did I understand this correctly?
You might need to temporarily disable the other protocols that Android offers via USB so that there are no other dialogs popping up (on your wife's phone). On my Nexus with Android 8, I can go to Connected devices -> USB and switch it to only "Charge this device" (so PTP or the other stuff is disabled).
In case there is some other app doing stuff with ADB USB devices, you might also need to change your defaults so that Bugjaeger can handle ADB USB devices.
Then you also need to make sure that Developer options are enabled on your wife's phone (and USB debugging of course).
Once you successfully connected and authorized the phone, you should do the following
- In Bugjaeger app switch to Packages tab and click on Add button top right (the button with the plus sign). Then you should pick the package disabler APK. This should install the package to your wife's phone
- Switch back to Commands tab (first tab) and either click on plus button in top right or shell into the device with the floating action button ("<>").
You can then activate the device owner with something like this
Code:
dpm set-device-owner disabler.package.name/.DisablerAdminReceiver
*Note that I don't prefix the command with "adb shell" here
When activating device owner you also need to make sure that there are no other accounts configured on your wifes phone (e.g. google account) because otherwise it probably won't work.
You can also check my blog post where I describe how to activate device owner with Bugjaeger in more detail (at the end of the blog post)
https://sisik.eu/blog/android/dev-admin/set-dev-owner
Hope that helps
going to give this a try thanks will post later with results,
Hi, I have a problem and I hope your app can help me.
I am without a PC and I have a tablet without root where I installed the application and a Samsung mobile phone that starts only in download mode, otherwise it gives me the message: Custom Binary blocked by FRP lock
Can I install a rom or a custom recovery with the app? I tried to connect them with the cable but it does not find the device.
Crisal said:
Hi, I have a problem and I hope your app can help me.
I am without a PC and I have a tablet without root where I installed the application and a Samsung mobile phone that starts only in download mode, otherwise it gives me the message: Custom Binary blocked by FRP lock
Can I install a rom or a custom recovery with the app? I tried to connect them with the cable but it does not find the device.
Click to expand...
Click to collapse
Hi,
Unfortunately, I don't think my app can help you in this case.
Hi, thanks for the reply. Do you know a way to help me?
please help me!!
will this app install an apk ive downloaded onto my phone onto my wear os watch? i have them both connected and wifi debugging. not sure how to go about installing the apk though. any help would be appreciated. thank you
lindsay
bugjaeger said:
I'm working on an ADB port which allows ADB(client/server) to run directly on Android device.
The app allows you to connect your phone to another Android device via USB OTG and perform some tasks that you normally perform from your PC(that has ADB installed).
For example
- take screenshots
- check logs
- install/remove packages
- check running processes
- push/pull files (also from locations that are not available to regular apps)
- run shell scripts executed as privileged ADB user
- create ADB backups and inspect backup files
- copy apps/APKs between phones
It's still work in progress(even though it's published), and I'm not even sure what features of ADB I should make available through the UI.
I was hoping to get some feedback here.
What are the main issues with UI? (because adb has so many features, I found it extremely hard to pack it into UI that would be intuitive)
What features would you expect from this kind of app?
Should I also embed fastboot, so that users would be able to flash Android from phone to phone?
Is it even worth to work on another one of these apps? (Maybe most people just prefer to always use ADB features directly from PC)
Bugjaeger Mobile ADB - Develop & Debug via USB OTG
Google play link: play.google.com/store/apps/details?id=eu.sisik.hackendebug
Update
I also ported Fastboot - for now the user can dump bootloader info
Thanks
Click to expand...
Click to collapse
lindser112 said:
will this app install an apk ive downloaded onto my phone onto my wear os watch? i have them both connected and wifi debugging. not sure how to go about installing the apk though. any help would be appreciated. thank you
lindsay
Click to expand...
Click to collapse
I don't have any wear os watch at my hands right now and I can't test it at the moment. Is the APK compatible with the watch? If you're able to establish an adb connection between Bugjaeger and the watch, try to check the "Packages" tab in Bugjaeger app. There's a "+" button in the top toolbar, which allows you to select apk for installing on the target device.
The official docs are showing how to establish ADB connection with the watch - https://developer.android.com/training/wearables/apps/debugging
In Bugjaeger you then need to tap the connect button (plug with a plus sign in top toolbar), type in the IP address of the device, and tap on connect button. Both devices should be connected to the same WiFi network to make this work.
i figured it out!!!! go to packages, press the plus button, install from apps installed on phone. it was soooo easy. i couldnt get adb to work on my pc!! i am so thankful to you for this app!!!!!
lindser112 said:
will this app install an apk ive downloaded onto my phone onto my wear os watch? i have them both connected and wifi debugging. not sure how to go about installing the apk though. any help would be appreciated. thank you
lindsay
Click to expand...
Click to collapse
lindser112 said:
i figured it out!!!! go to packages, press the plus button, install from apps installed on phone. it was soooo easy. i couldnt get adb to work on my pc!! i am so thankful to you for this app!!!!!
Click to expand...
Click to collapse
Perfect :laugh:
Hi, I've come to these forums because you guys are knowlegeable.
I essentially uninstalled thorugh ADB the package installer (com.google.android.packageinstaller) and little did I know that was a big mistake on my part, as I didn't realize the package installer was a core part of the system. All was going well until i turned on and off my phoen, and it is now always stuck in recovery mode.
- Rebooting the phone just sends me back to the menu.
- I've not tried wiping the data yet, since I want to keep my files (for the moment).
- Connect with MiAssistant allows me to connect my phone to my PC, but it in sideload mode automatically. I can go in fastboot mode though, and fortunately I have turned USB Debugging on.
As I've come to realize, a factory reset or flashing a ROM would fix my issue, but also delete all my files (photos, music...). I was planning to do a backup of my photos, but now it's too late.
Is there any way I can access my files and pull them to my PC on sideload/fastboot mode?
The only thread i have seen with a similar problem is this one: https://forum.xda-developers.com/showthread.php?t=2487147
I also get the error:closed when I try an adb pull.
Thanks in advance.
Hi,
I'm still using CD Receiver XC-HM82. There is a dedicated, quite old, application Control App which Pioneer released some time ago. After installing the app, when a CD receiver is discovered the app unfortunately downloads some data needed for managing this particular model.
Recently I reinstalled android system and when I try downloading those data it says "download failed". The reason might be that there are some issues on Pioneer server side or they've simply stopped supporting this device.
I have still one phone where this application is fully installed and working fine. I think that the data (downloaded from Pioneer servers to manage XC-HM82) are being store at: /data/user/0. However, I haven't rooted this phone.
The question. How can I retrieve data from /data/user/0 and what's maybe even more important can I create APK which will include all data needed for managing XC-HM-82 so I could still use this application to manage my CD receiver?
Thanks for any tips
I'll answer to my own post for users who might use it.
1.Turn on Developers option in your phone
2. If you use Lineage OS allow Debugging as Root or Root via ADB
3. Check all aps you have installed
adb shell pm list packages -f -3
4. To backup base apk (in my case)
adb pull /data/app/jp.pioneer.avsoft.android.controlapp-PIpLM2ikeE7WRs7X2TlOFg==/base.apk pioneer.apk
5. To backup data of the application (including packet for controlling particular model)
adb backup -f pioneer.adb -apk jp.pioneer.avsoft.android.controlapp
Please note: you'll have to accept this action in Android
6. You should received two files: pioneer.apk and pioneer.adb
7. To restore base apk (in my case)
adb install pioneer.apk
8. To restore data of your app (in my case)
adb restore pioneer.adb
Please note: you'll have to accept this action in Android
Eventually, you should have a feel backup of you app with data folder.
This procedure has been created based on this source page:
https://gist.github.com/AnatomicJC/e773dd55ae60ab0b2d6dd2351eb977c1 \
Thanks to "@AnatomicJC"
gregory_cooky said:
I'll answer to my own post for users who might use it.
1.Turn on Developers option in your phone
2. If you use Lineage OS allow Debugging as Root or Root via ADB
3. Check all aps you have installed
adb shell pm list packages -f -3
4. To backup base apk (in my case)
/data/app/jp.pioneer.avsoft.android.controlapp-PIpLM2ikeE7WRs7X2TlOFg==/base.apk pioneer.apk
5. To backup data of the application (including packet for controlling particular model)
adb backup -f pioneer.adb -apk jp.pioneer.avsoft.android.controlapp
Please note: you'll have to accept this action in Android
6. You should received two files: pioneer.apk and pioneer.adb
7. To restore base apk (in my case)
adb install pioneer.apk
8. To restore data of your app (in my case)
adb restore pioneer.adb
Please note: you'll have to accept this action in Android
Eventually, you should have a feel backup of you app with data folder.
This procedure has been created based on this source page:
https://gist.github.com/AnatomicJC/e773dd55ae60ab0b2d6dd2351eb977c1 \
Thanks to "@AnatomicJC"
Click to expand...
Click to collapse
Gregory, thank you very much for your post!
First of all, I learned that I could stop checking my home network/router/settings etc.. to find the cause of the failing download.
I have the bluray player Pioneer MCS-FS232, with the controlapp working on my tablet.
I want to transfer the app to my phone.
I followed your steps:
Pulled the apk and backed up the data
I re-installed the app with adb install, and I restored the data with the commands above. Device report success after restoring data.
Unfortunately the app persists in asking for a download (also after restarting device). I tried also on another device, same result.
Could it be that the data restore command do need more specifications?
Thanks in advance for your reply...
Ptr
PS: the full command for step 4 would be (in my case)
adb pull /data/app/jp.pioneer.avsoft.android.controlapp-HjWUmVnui7FpTk0qKpQ3Ow==/base.apk pioneer.apk
you might want to add
adb pull
to your text in step 4
Thanks PtKt for your post and correction regarding "adb pull" missing.
There's no problem with base apk:
Pioneer ControlApp for Android - APK Download
Download Pioneer ControlApp apk 4.1.0 for Android. ControlApp is an application for corresponding Pioneer Products control.
apkpure.com
The thing is the data files (downloaded from Pioneer servers when it was still possible). What's the version of system: on a tablet and phone?
Recently, I realized that this method works on Android 9-11 but not on Android 7 cause there's a different folder structure. It recognized CD receiver but crashes when trying to connect to it.
Hello Gregory,
1. first tried it on my phone (where I had the app, but deleted it ( ). Android 11. This is the taarget-device. Not rooted. APK file installed with adb succesfully
2. when this did not work I tried on a tablet (rooted Asus transformer tf701t with timduru android 7). installed APK, date reports succes, but no working app.
3. device where the app works is Huawei tablet with android 10 (not rooted)
4. My computer is an old IMAC with Ununtu 20.4 lts
I tried to open the pioneer adb file, only partly accessible and only 5 lines.
I checked Androi/data/jp.pioneer.avsoft (etc), on my android 7 tablet, there is a map ' files' but without files.
tbc, Ptr
I'm not so advanced in this matter, but up to Android Version it's about folder /data/data/jp.pioneer... (and so on). You can't access it without root. Maybe you can do that via TWRP on Android 7 on later version it's an issue in easy way. Other solution is to use Magisk to manually copy needed files.
I'm not sure if referring to the system version different files were downloaded from Pioneer's serves. Unfortunately, I don't know.
gregory_cooky said:
I'm not so advanced in this matter, but up to Android Version it's about folder /data/data/jp.pioneer... (and so on). You can't access it without root. Maybe you can do that via TWRP on Android 7 on later version it's an issue in easy way. Other solution is to use Magisk to manually copy needed files.
I'm not sure if referring to the system version different files were downloaded from Pioneer's serves. Unfortunately, I don't know.
Click to expand...
Click to collapse
Aiai.... after a few days of efforts my conclusion was that you need root access to your source device.
And then I re-read your solution and I saw that I overlooked the last part of point 2 of your solution....
"2. If you use Lineage OS allow Debugging or Root via ADB." I did allow USB debugging but I missed 'as Root or Root via ADB'
OK, it is a pity, I'm not going to root my Android 10 tablet where the working app lives. Meanwhile I learned a lot and that's always fun....
Thank you very much for your work, if I come across another solution I will report here.
Ptr
Great. You're very welcome.
Hi guys. I have problem with this Control App from Pioneer too.
On my Android 11 phone is after starting the app visible only the loading screen or a black screen and nothing happend more.
On the old tablet with Android 5 run this app, but it want to download more files from the server, but that is not possible yet beacuse of severs shutdown? (it works well two months ago).
Can you please give me a advice how to run this app on Android 11 and share the downloaded files for my Android 5 tablet.
Because of this is using of my XC-HM72 very limited.
Thank your for every advice (My devices are not rootet).
Rdbc26 said:
Hi guys. I have problem with this Control App from Pioneer too.
On my Android 11 phone is after starting the app visible only the loading screen or a black screen and nothing happend more.
On the old tablet with Android 5 run this app, but it want to download more files from the server, but that is not possible yet beacuse of severs shutdown? (it works well two months ago).
Can you please give me a advice how to run this app on Android 11 and share the downloaded files for my Android 5 tablet.
Because of this is using of my XC-HM72 very limited.
Thank your for every advice (My devices are not rootet).
Click to expand...
Click to collapse
Hiya,
You won't download needed files (graphics or some scripts customized particularly for your XC- HM72) because there are no files on Pioneer's servers, anymore. If you don't have any device with fully working app you have to ask anyone who has it still working to export needed files (usually as "adb" file) for you then you just import it by a command:
adb restore exported_file_name.adb
Click to expand...
Click to collapse
and that's all.
Nevertheless, since Android 8 I think that the folder with user data files has a different location, so mentioned method should work for Android 8 - 11 (I haven't tested it on 12). That's all what I can suggest you.
gregory_cooky could you please share you date with adb file?Thank you
Rdbc26 said:
gregory_cooky could you please share you date with adb file?Thank you
Click to expand...
Click to collapse
There you go. Please unzip it and good luck!
Thank you for the file, but still without success. I tried adb restore pioneer.adb and on my android 5 tablet and still want to download files from innactive servers. The same I have done on my phone with android 12 and there is still the freeze or black screen :-( What now? Thanks
Rdbc26 said:
Thank you for the file, but still without success. I tried adb restore pioneer.adb and on my android 5 tablet and still want to download files from innactive servers. The same I have done on my phone with android 12 and there is still the freeze or black screen :-( What now? Thanks
Click to expand...
Click to collapse
I'm not much surprised about Android 5 cause it mightn't work. Unfortunately, I don't have any other news for you. I'm not even sure if my files were suitable for the model of yours. Further steps you should do by yourself. Maybe you'll find a solution and provide it for someone else who has the same CD Receiver as yours.
I've spend a lot of time trying to run the app for my old, but still well performing XC-HM71.
Luckily I've found old Titanium Backup (playstore) backups from 2015 and 2017. I successfully restored the app and settings on my forgotten redmi note 3 pro as root and old android were needed. If anyone is interested and want to try again, both backups are attached. Older app version is 3.5.0, never is 4.1.0. I'll recommend to start with older version, then restore just the newer app without data. It worked for me. Good luck.
But I've remembered the app a bit differently. Seems to be a bit useless, same can be done with remote itself.
Its just a bit faster to add internet radio stations, as browsing on unit itself is a bit pain in the backside.
XC-HM71 is a base version, no Bluetooth, Spotify or other currently standard addons, so really the Pioneer app do not have any real advantages.
Btw, I've had no luck with adb files from @gregory_cooky.
How to control my vsx 527 with control app? Can someone please help
Hi
I need files for Pioneer XC-HM81.
Can someone please help.
Good news!
I finally managed to transfer the needed Pioneer ControlApp data from my -non rooted- tablet (Huawei M5, android 10) to my -also non rooted- telephone (Samsung Galaxy A40, Android 11), based on gregory_cooky’s procedure in post 2 of this thread.
I tried it half a year ago (see above, my post 3) and gave up.
But a renewed attempt this week, learned me that I overlooked a crucial element: both devices need to have “USB debugging enabled” to operate the adb commands from my computer successfully.
Obviously, I misinterpreted step 2 in gregory_cooky’s procedure.
After enabling ‘developers option’ on both devices, you need to go to enable USB debuging . Without that, your devices are only partly accessible from your computer and adb commands will give error messages.
In detail: go to settings, scroll down towards about tablet or info telephone, look for software and then ‘buildnumber . Tap 7 times on buildnumber. this activates developers option. Go back to settings, you can now find developers option as the last point under settings. Tap developers option, enable it, look then for USB debugging and enable it. Do this on both devices.
Connect your source device (=device with a working ControlApp) to your computer. Open a terminal screen on your computer and type adb devices.
[email protected]:~$ adb devices
List of devices attached
P15YC3E10080000000007FC1881C0 device
Then proceed as described by gregory_cooky in post 2.
Be sure to have your source files (ControlApp apk and data) in the root of your home directory, otherwise adb cannot find it. Be aware this type of commands is capital sensitive, so if you ask for Pioneer.adb but the name of the file is pioneer.adb the computer comes with No such file or directory.
I use the ControlApp for my Pioneer MCS-FS232, which I can now easily operate from my arm chair. Volume, switch from CD to Aux or FM, etc.
Peter
It appears ControlApp has finally given up.
Looking if anyone has perhaps a copy of the source files.
ControlApp downloads the files from the following URL: http://www.pioneer.eu/files/support/Wr5Ch9makajA/smartphone_app/common/controlapp/sma/SmaHtml_14.zip
Note that this is a HTTP URL, so can easily be faked for the device, however need the ZIP. Used to have it, now it's gone
hello,
would anyone have a working adb for Pioneer X-HM72 please?