hi all..
I need guidance..
Ok.. the story was, my Transformer was rooted, running on Prime firmware.
Recently i want to un-root, prior to update to 3.2. So, i followed this guide >> http://forum.xda-developers.com/showthread.php?t=1154947.
Ok, the guide has 3 steps,
1. Install repacked firmware
2. Install recovery
3. Install stock firmware downloaded from Asus website
The thing is, after i done step 2, it failed in step 3! I dunno why, but it failed to flash the stock update fie. The "warning triangle" appear while flashing, it stucked there, so ihave to force reboot using the power button. It managed to boot, a message appear "update failed, the device was restored to previous firmware".
So, i guess my device was stucked in the "repacked" firmware. CWM recovery gone, but SU app remains. The device still running, but seems buggy.. i tried to reinstall the stock update several times, but stil failed. I gaved up for the day
Then, just now,i connected it to a wifi. Suddenly the device starts to download 3.2 update. I let it finished. Then, i install it. It works! Updates done. My device is on 3.2 now.
BUT, SU app is still there!
Now im not sure if im really on stock firmware 3.2 or not.
How to remove the SU app?
how to do a clean/complete restore to stock firmware?
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Kleo2 said:
Hi guys,
I'm running my Moto G 16GB on Kitkat 4.4.2 system version 175.44.1.falcon_umts.Retail.en.DE. Today it offered to download and install the latest OTA update (called 176.44.1.en.DE). I started the download and tried to install it.
After downloading the update was placed in /cache. The file name was 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE.zip', which surprised me. I was expecting something like 'Blur_Version.176.44.1.falcon_umts.Retail.en.DE.zip'.
When I tried to install it without removing root and without going back to stock recovery it ended with a signature error in CWM. Installing the untrusted zip manually didn't work as well - as expected.
Then I tried to follow advise from other threads and went back to stock recovery (extracted from a full install package 'Blur_Version.175.44.1.falcon_umts.Retail.en.DE' - 444MB) That seemed to work and the install of the OTA update went fine before getting stuck on the boot animation on the first boot. It sat there for 10 minutes before I rebooted and restored a CWM backup.
I'm running out of ideas. Some say it's sufficient to go back to stock recovery temporarily. Others say you need to go back to full stock.
I have to repeat that I'm rooted and that I've de-activated a few unused apps (mainly harmless google stuff (hangout, search, music and so on) and Motorola Assist, Migrate and 'Context Services') .
Are there further findings about what stops the OTA from succeeding?
Many thanks in advance,
Kleo2
Click to expand...
Click to collapse
If your phone is rooted or there is a CWM installed or there is any change in system files then ota will fail till you flash stock rom. You can't just bring back stock recovery. You have to "delete" root as well.
There is some info http://forum.xda-developers.com/showpost.php?p=47495650&postcount=6
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
CromoPT said:
I will post my case here, I had the same problem, I had CWM and root and when I rebooted to update I get installation failed and boot loop.
Then I just flashed stock recovery (only) rebooted and now I already have the update installed
Click to expand...
Click to collapse
Hi, thanks for your replies. Because of your report and others, who state the same (installing stock recovery only to get the update working) I was hoping to get around going back to full stock. It always takes a lot of time to configure the phone the way it was configured before essentially wiping.
Just to repeat what I did: when I try to install the OTA while CWM is installed there's just an error message in CWM, the update fails, but the phone is working normally afterwards. It's just not updated.
When I try with stock recovery the update process finishes without errors, but the phone get stuck during the boot animation.
Maybe there's a way to fix the boot loop?
Looking forward to any suggestions
Cheers, Kleo2
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Kleo2 said:
I tried again and found a way without going back to full stock.
Click to expand...
Click to collapse
Thanks. :good: Did 1 to 3 and phone booted just fine (not stuck on boot animation)
My phone: No logo fix, root, Xposed Framework
After update root was still there, Xposed needed a new install
total noob
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Papshmir said:
i would so much like to update my rooted moto g.. because of my card reader.
does anyone know a step-by-step-for-complete-noobs-post and could provide a link?
i'm just starting.. and so happy and proud that i got my phone rooted.. and that i got rid of this rebooting problem by erasing the cache.
but i'm already lost when i read "flashed stock recovery".. yeah i know: that much noob!
help would be much appreciated!
Papshmir
Click to expand...
Click to collapse
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Thanks!
Kleo2 said:
I tried again and found a way without going back to full stock.
1. flashed stock recovery from full 175.44.1 image
2. let the phone download the OTA and restart to install it
3. ota install in stock recovery went fine
4. reboot -> stuck on boot animation again
5. flashed CWM and wiped cache AND dalvik cache
6. next boot took longer than normal but got past the boot animation
7. android optimized/cached my apps and then started normally
8. version is now 176.44.1 and the phone seems to work normally (after 30 minutes of usage)
Hope that helps someone and that I won't have issues going forward because I did it this way.
Cheers, Kleo2
Click to expand...
Click to collapse
Thanks,
Wiping cache and dalvik cache did the trick for me. You saved my day
Please please help
I have the same problem. I've tried to update the new OTA and failed. After restoring full stock rom, the system simply doesn't boot!
I had Faux Kernel and GravityBox but I didn't revert anything. I thought that a full stock rom would clear all system settings.
This is my version of stock (Blur_Version.174.44.9.falcon_umts.Retail.en.GB) and I tried to flash it several times now. No success. I get stuck on the boot logo.
I tried to downgrade to 4.3 using version Blur_Version.14.71.8.falcon_umts.Retail.en.GB. I was able to boot and see the initial setup but I have no WIFI! I was trying to install 4.3 then try to update via OTA but OTA only works with WIFI so I'm stuck.
I also tried installing the 24th Feb nightly build of Cyanogen and the device also booted but with no WIFI.
I really don't know what to do! Please help me. I've tried other stock images out of despair but none with sucess.
Does anyone have a clue to what might be to problem and how to revert it?
Thank you
draco259 said:
So I am trying to put back my stock recovery so I can take the OTA, but after I flash the recovery and try to reboot to it, it says "No Command". I have reflashed TWRP and then the stock recovery again with the same result. The phone itself will boot fine, but I can't install the OTA as it gets an error part of the way into the install. Any ideas? I have the 1034.
EDIT: Well I remembered I did the H+ mod, so after reverting that the OTA flashed I had Faux Kernel before hand, but after reflashing it my wi-fi wont enable, any ideas?
Click to expand...
Click to collapse
Before flashing stock ROM try to clear/format all your partitions with a custom recovery!
Sent from my XT1032 using xda app-developers app
I installed the OTA update using the CWM recovery but not root, I changed the update-script to not give error during installation
Hui91 said:
I UPDATED my rooted Kitkat Tesco version SUCCESFULLY! and still rooted.
What I did:
1. install Motorola Device Manager (RESTART computer and telephone)
2. downloaded MotoTool
3. Made a Nandroid backup in CMW, made a backup with MotoTool too. Just in case
And deactived (did not uninstall) my Xposed framework modules (if you dont have it, you dont need to)
I have some system apps disabled, but didnt re-activate it. (was too lazy haha)
4. downloaded the correct ROM from: http://sbf.droid-developers.org/phone.php?device=14 (Tesco UK 4.4.2)
5. unzipped the ROM and rename and overwrite the recovery.img to the exact name as in the MotoTool All In One 2.6\Data\KitKat\StockKitKatrecovery.img (Just for sure it's the same as my ROM, I dont know if all the ROMs have the same recovery sooo )
6. started MotoTool, unplug&replug device. Checked KitKat option in the program, did a connection check, it was okay. Did a NORMAL restart via progam. You have to grant permisson on your phone.
7. after reboot, rebooted the phone to FASTBOOT.
8. Checked Stock Fastboot in the program, it flashed succesfully. Then I went into recovery (1×down volume, then 1× up volume) checked if the recovery was working. It was working (android logo+ no command error message)
9. reboot (long press power button)
10. Updeted OTA, settings/inf./update.. blabla okay okay next next. Wait until it downloads (only 7.9 MB )
11. wait for the update to be done, then it reboots, then apps are being updated. Everything looks fine and working
+1 flash CMW or other recovery again.
Hope this helps! I was afraid to do it too. I'm not used to MotoTool and other Motorola stuff because I had a HTC Desire, it was much simplier with that. But no risk here either! Good luck!
Click to expand...
Click to collapse
At part 8, I am getting an image of the android guy with his stomach open with a big red '!'. That's 'no command' right?
Any ideas? I have no idea what I am doing
Guys, a really easy way to update is:
1. Install Philz recovery - http://forum.xda-developers.com/showthread.php?t=2639583
2. Reboot and then download the OTA update when prompted - select Install when prompted
3. It will now reboot into Philz recovery, install the update and reboot
4. You'll see Android is Upgrading...
5. Re-boot back into recover and re-install faux kernel
I have just upgraded my XT1032 on 174.44.9 en GB (rooted + faux008) to 176.44.1 using this... worked like a dream! All I had to do was re-install faux kernel as that was overwritten by the OTA, but Root was in-tact...
i have root, twrp recovery and faux kernel, the problem is only faux kernel? Or I must remove all? (root recovery etc)
System update cannot be applied:
1) download system update
2) tap reboot and install
3) start installation
4) got error message "Error!" after 5 seconds
/system/bin/app_process has unexpected contents
E:Error in /cache/blablablanumbershere.signed-hummerhead-KTU84M-from-KOT59H.d174d546.zip
Status 7
1) Tried to wipe cache data
2) Then install ADB update - not success after an hour
Did somebody have the same problem?
Hey, hope this help.
Install this from the play store
https://play.google.com/store/apps/details?id=com.tassadar.multirommgr
Use it ONLY to install the recovery at this stage.
After it's done reboot, make sure you're still rooted.
Apply update as per normal, should work with this new recovery .
yons88 said:
System update cannot be applied:
1) download system update
2) tap reboot and install
3) start installation
4) got error message "Error!" after 5 seconds
/system/bin/app_process has unexpected contents
E:Error in /cache/blablablanumbershere.signed-hummerhead-KTU84M-from-KOT59H.d174d546.zip
Status 7
1) Tried to wipe cache data
2) Then install ADB update - not success after an hour
Did somebody have the same problem?
Click to expand...
Click to collapse
If you're rooted, do not bother wasting time with OTA updates
Just download the full rooted stock ROM in android development and flash it without wipe from recovery.
It's actually fewer steps anyway.
OTA = revert system changes and/or kernel, reboot into recovery, flash the OTA , boot to bootloader, connect to pc, fastboot flash recovery, reboot into recovery, flash supersu.
Rooted stock = reboot into recovery, flash the ROM.
No brainer really. Flashing an OTA if rooted is a fool's errand.
Hi,
I'm trying to update my MT7-TL10 with the OTA update called "B122SP06_B123SP03". When the download is finished, the phone reboot into recovery and tries to install the update but fails after some seconds.
What I already did:
Flash original recovery
Unroot
Factory reset
Update with SD card: fail
Update with HiSuite: fail
What may be related with update failure:
I installed the xposed module and tried to change build.prop file some weeks ago.
The original recovery is not the right one maybe, how to know?
The current ROM is MT7-TL10V100R001CHNC00B122SP06
Thanks to anyone who can help
Hello,
i have a Huawei Honor 6X (BLN-L21):
Multitool picture while phone is connected via fastboot:
ibb.co/Ykk6DdP
I had LineageOS 14.1 installed on my phone but I was missing some of the EMUI features. I decided to go back to EMUI (EMUI5.0). Everything worked fine. After that I wanted to install Magisk with this tutorial: How to install Magisk (xda)
After flashing the zip with TWRP the phone wanted a password for decrypting. I entered my normal screen lock pin. After checking it was saying that the password ist correct but my files were corrupted. I had to click on "reset phone" which was starting something like "factory reset lowlevel" but the same issue appeared after that.
I decided to get the firmware BLN-L21C432B382 with the Firmware Finder and I am having trouble to install that. First I wiped with TWRP then installed stock recovery and stock erecovery but when I try to force install the stock firmware, the installation gets stuck at 5% and then skips all the way to 100% and restarts. After the reboot I can see the Honor boot animation but it restarts before the normal screen appears. I guess this is called a bootloop. Any suggestions about it?
PS: I already tried to use erecovery to download the right firmware but its telling me "getting package info failed"