SDCard Missing when using Adopted Storage - Moto G 2015 Q&A, Help & Troubleshooting

SDCard Missing when using Adopted Storage - Moto G 2015 Q&A, Help & Troubleshooting

I've had this problem since I bought my 8GB osprey. Long story short, if you format the card as Adopted, it will work flawlessly for some weeks and then a notification saying "SDCard missing" will appear, and all the apps installed on it will vanish. It will only work again if you format it again, losing everything.
I've figured out that formatting it as Portable will work great, but creating a second partition and using on Link2SD or similiar won't. I've tried using EXT2, EXT3, EXT4 and F2FS on the second partition, and they won't even mount, neither through the app nor manually using the mount command.
This is really pissing me off, since I can install only 5-6 apps on the internal memory.
Useful dmesg output:
Code:
osprey:/ $ dmesg | egrep 'mmc1|mmcblk1'
[ 0.949370,0] mmc1: no vqmmc regulator found
[ 0.949383,0] mmc1: no vmmc regulator found
[ 0.981961,1] mmc1: SDHCI controller on 7864900.sdhci [7864900.sdhci] using 32-bit ADMA
[ 1.267895,1] mmc1: new ultra high speed SDR50 SDHC card at address aaaa
[ 1.268370,1] mmcblk1: mmc1:aaaa SS16G 14.8 GiB
[ 1.280566,1] mmcblk1:
[ 31.752721,1] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 31.752739,1] mmcblk1: retrying write for general error
[ 31.769379,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 31.769394,0] mmcblk1: retrying write for general error
[ 31.782204,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 31.782220,0] mmcblk1: retrying write for general error
[ 31.795130,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 31.795154,0] mmcblk1: retrying write for general error
[ 31.807492,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 31.807512,0] mmcblk1: retrying write for general error
[ 31.820289,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 31.820307,0] mmcblk1: retrying write for general error
[ 32.245241,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 32.245260,0] mmcblk1: retrying write for general error
[ 32.245280,0] mmc1: recovering card (3); health: 1/0, 0/141
[ 32.867793,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 32.867814,0] mmcblk1: retrying write for general error
[ 32.867858,0] mmc1: recovering card (3); health: 2/0, 0/170
[ 33.690134,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 33.690150,0] mmcblk1: retrying write for general error
[ 33.690167,0] mmc1: recovering card (3); health: 3/0, 0/199
[ 34.714127,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 34.714146,0] mmcblk1: retrying write for general error
[ 34.714191,0] mmc1: recovering card (3); health: 4/0, 0/228
[ 35.941315,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 35.941334,0] mmcblk1: retrying write for general error
[ 35.941356,0] mmc1: recovering card (3); health: 5/0, 0/257
[ 37.364783,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 37.364799,0] mmcblk1: retrying write for general error
[ 37.364820,0] mmc1: recovering card (3); health: 6/0, 0/286
[ 38.989613,1] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 38.989632,1] mmcblk1: retrying write for general error
[ 38.989652,1] mmc1: recovering card (3); health: 7/0, 0/315
[ 40.814170,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 40.814221,0] mmcblk1: retrying write for general error
[ 40.814245,0] mmc1: recovering card (3); health: 8/0, 0/344
[ 42.837554,0] mmcblk1: mmc_blk_err_check: general error sending status command, card status 0x80900
[ 42.837571,0] mmcblk1: retrying write for general error
[ 42.837591,0] mmc1: giving up on request after 10592 ms (9/0, 0/373, 1/3)
[ 42.837600,0] end_request: I/O error, dev mmcblk1, sector 31116248
[ 42.837610,0] Buffer I/O error on device mmcblk1, logical block 3889531
[ 42.837616,0] lost page write due to I/O error on mmcblk1
[ 42.837638,0] end_request: I/O error, dev mmcblk1, sector 31116256
[ 42.837647,0] Buffer I/O error on device mmcblk1, logical block 3889532
[ 42.837653,0] lost page write due to I/O error on mmcblk1
[ 42.837663,0] end_request: I/O error, dev mmcblk1, sector 31116264
[ 42.837670,0] Buffer I/O error on device mmcblk1, logical block 3889533
[ 42.837676,0] lost page write due to I/O error on mmcblk1
[ 42.837685,0] end_request: I/O error, dev mmcblk1, sector 31116272
[ 42.837693,0] Buffer I/O error on device mmcblk1, logical block 3889534
[ 42.837699,0] lost page write due to I/O error on mmcblk1
[ 42.837707,0] end_request: I/O error, dev mmcblk1, sector 31116280
[ 42.837715,0] Buffer I/O error on device mmcblk1, logical block 3889535
[ 42.837722,0] lost page write due to I/O error on mmcblk1
[ 43.858539,2] mmcblk1:
[ 43.910881,0] mmcblk1: p1
[ 44.596791,0] mmc1: recovering card (0); health: 1/0, 0/419
[ 45.308871,0] mmc1: recovering card (0); health: 2/0, 0/450
[ 46.222385,1] mmc1: recovering card (0); health: 3/0, 0/481
[ 47.333208,0] mmc1: recovering card (0); health: 4/0, 0/512
[ 48.646364,1] mmc1: recovering card (0); health: 5/0, 0/543
[ 50.159876,1] mmc1: recovering card (0); health: 6/0, 0/574
[ 51.873191,1] mmc1: recovering card (0); health: 7/0, 0/605
[ 53.786052,0] mmc1: recovering card (0); health: 8/0, 0/636
[ 55.899446,0] mmc1: giving up on request after 11302 ms (9/0, 0/667, 2/3)
[ 55.899457,0] end_request: I/O error, dev mmcblk1, sector 2048
[ 57.685012,1] SELinux: initialized (dev mmcblk1p1, type vfat), uses genfs_contexts
[ 135.186116,1] mmcblk1: p1
[ 136.292625,0] mmcblk1: p1 p2
[ 136.914438,0] mmc1: recovering card (0); health: 1/0, 0/2307
[ 137.574522,0] mmc1: recovering card (0); health: 2/0, 0/2338
[ 138.434276,0] mmc1: recovering card (0); health: 3/0, 0/2369
[ 139.489132,0] mmc1: recovering card (0); health: 4/0, 0/2400
[ 140.739048,0] mmc1: recovering card (0); health: 5/0, 0/2431
[ 142.189193,0] mmc1: recovering card (0); health: 6/0, 0/2462
[ 143.838737,0] mmc1: recovering card (0); health: 7/0, 0/2493
[ 145.689020,0] mmc1: recovering card (0); health: 8/0, 0/2524
[ 147.738979,0] mmc1: giving up on request after 10824 ms (9/0, 0/2555, 3/3)
[ 147.738989,0] mmc1: dropping card after 3 failures
[ 147.739012,0] end_request: I/O error, dev mmcblk1, sector 34816
[ 147.739149,0] mmc1: failed to re-detect removed SD card
[ 147.895107,3] mmc1: card aaaa removed
[ 147.921353,3] mmc1: ignoring bad card
It looks like this is a major Moto G 2015 hardware flaw, since I've seen a lot of people with this problem and it has happened on every ROM i've tried (and I change ROMs frequently).

Related

[Q]

Archos G9: anyone else encountered this probl
Code:
wl1271: ERROR command complete timeout
[ 1154.622924] ------------[ cut here ]------------
[ 1154.623443] WARNING: at drivers/net/wireless/wl12xx/cmd.c:108 wl1271_cmd_send+0x33c/0x374 [wl12xx]()
[ 1154.623687] Modules linked in: wl12xx_sdio wl12xx mac80211 cfg80211 hso [last unloaded: wl12xx_sdio]
[ 1154.625640] Backtrace:
[ 1154.626098] [<c005b1dc>] (dump_backtrace+0x0/0x110) from [<c05918a0>] (dump_stack+0x18/0x1c)
[ 1154.626525] r7:00000009 r6:0000006c r5:bf08851c r4:00000000
[ 1154.627838] [<c0591888>] (dump_stack+0x0/0x1c) from [<c009b5a0>] (warn_slowpath_common+0x54/0x6c)
[ 1154.628112] [<c009b54c>] (warn_slowpath_common+0x0/0x6c) from [<c009b5dc>] (warn_slowpath_null+0x24/0x2c)
[ 1154.628540] r9:00000000 r8:00000000 r7:000000b2 r6:cd657664 r5:ffffff92
[ 1154.632751] r4:cd657260
[ 1154.633850] [<c009b5b8>] (warn_slowpath_null+0x0/0x2c) from [<bf08851c>] (wl1271_cmd_send+0x33c/0x374 [wl12xx])
[ 1154.635620] [<bf0881e0>] (wl1271_cmd_send+0x0/0x374 [wl12xx]) from [<bf089684>] (wl1271_cmd_configure+0x44/0x68 [wl12xx])
[ 1154.636199] [<bf089640>] (wl1271_cmd_configure+0x0/0x68 [wl12xx]) from [<bf08ce84>] (wl1271_acx_sta_mem_cfg+0xc0/0xf0 [wl12xx])
[ 1154.636627] r6:00000020 r5:00000001 r4:d09355a0
[ 1154.640075] [<bf08cdc4>] (wl1271_acx_sta_mem_cfg+0x0/0xf0 [wl12xx]) from [<bf090240>] (wl1271_hw_init+0x260/0x534 [wl12xx])
[ 1154.640838] r7:cd656160 r6:cd657298 r5:00000000 r4:cd657260
[ 1154.642272] [<bf08ffe0>] (wl1271_hw_init+0x0/0x534 [wl12xx]) from [<bf085eb0>] (wl1271_op_add_interface+0xe4/0x25c [wl12xx])
[ 1154.642944] [<bf085dcc>] (wl1271_op_add_interface+0x0/0x25c [wl12xx]) from [<bf04f678>] (ieee80211_do_open+0x32c/0x638 [mac80211])
[ 1154.643615] [<bf04f34c>] (ieee80211_do_open+0x0/0x638 [mac80211]) from [<bf04f9f4>] (ieee80211_open+0x70/0x74 [mac80211])
[ 1154.644165] [<bf04f984>] (ieee80211_open+0x0/0x74 [mac80211]) from [<c0454714>] (__dev_open+0xa0/0xe8)
[ 1154.644897] r5:bf063e78 r4:ceace000
[ 1154.648620] [<c0454674>] (__dev_open+0x0/0xe8) from [<c0451618>] (__dev_change_flags+0xac/0x130)
[ 1154.649963] r7:00000001 r6:00001002 r5:00001003 r4:ceace000
[ 1154.652008] [<c045156c>] (__dev_change_flags+0x0/0x130) from [<c0454640>] (dev_change_flags+0x18/0x4c)
[ 1154.652465] r7:ee947700 r6:00000001 r5:00001002 r4:ceace000
[ 1154.656158] [<c0454628>] (dev_change_flags+0x0/0x4c) from [<c04cdb8c>] (devinet_ioctl+0x3a0/0x7bc)
[ 1154.656433] r7:ee947700 r6:00000001 r5:00008914 r4:00000000
[ 1154.657714] [<c04cd7ec>] (devinet_ioctl+0x0/0x7bc) from [<c04cf300>] (inet_ioctl+0xdc/0x10c)
[ 1154.658172] [<c04cf224>] (inet_ioctl+0x0/0x10c) from [<c0440cac>] (sock_ioctl+0x1fc/0x24c)
[ 1154.658416] r5:becec984 r4:00008914
[ 1154.659271] [<c0440ab0>] (sock_ioctl+0x0/0x24c) from [<c0126500>] (do_vfs_ioctl+0x548/0x5b4)
[ 1154.660003] r7:00000005 r6:00008914 r5:d45c3f00 r4:becec984
[ 1154.663757] [<c0125fb8>] (do_vfs_ioctl+0x0/0x5b4) from [<c01265ac>] (sys_ioctl+0x40/0x64)
[ 1154.664398] r9:cd52a000 r8:c00573a8 r7:00000005 r6:00008914 r5:becec984
[ 1154.665496] r4:d45c3f00
[ 1154.666351] [<c012656c>] (sys_ioctl+0x0/0x64) from [<c0057200>] (ret_fast_syscall+0x0/0x30)
[ 1154.666595] r7:00000036 r6:becec984 r5:00000005 r4:00e63b94
[ 1154.670745] ---[ end trace b791f248093db0fd ]---
[ 1154.671264] wl1271: WARNING CONFIGURE command NOK
[ 1154.672027] wl1271: WARNING wl1271 mem config failed: -110
[ 1156.004577] wl1271: ERROR firmware boot failed despite 3 retries

qtry said:
Archos G9: anyone else encountered this probl
Click to expand...
Click to collapse
No. Simply put mate;-
Post a sensible comment in your title - not just [Q]
Post a description of what the problem is that you are encountering
Post other useful info such as software versions etc

[Q] Random reboot debugging help needed

I've been running CM dailies for a while. A few weeks ago, i started getting tons of random reboots. I grabbed quite a few debugs, and if i'm reading it right, it seems like i have some memory errors that cause the reboots to happen. I tried a few formats and things, nothing seemed to help. I finally went back to stock, and have had no reboots for over a week.
So the questions are:
1) is there anything i can do to avoid the problem?
2) at boot, it says the kernel has option errors=panic. Can i easily turn that off w/o a recompile? Is that a good idea?
here's part of the last-kmsg that may be interesting:
[ 3868.222239] mmc0: error -110 during resume (card was removed?)
[ 3868.222769] fsa9480 7-0025: dev1: 0x0, dev2: 0x0
[ 3868.223166] wakeup wake lock: event2-364
[ 3868.223266] s3c-rtc s3c2410-rtc: rtc disabled, re-enabling
[ 3868.223467] [ wm8994_samsung.c (wm8994_resume,3113) ] ------WM8994 Revision = [3]-------
[ 3868.223773] PM: resume of devices complete after 1596.380 msecs
[ 3868.224134] Restarting tasks ... done.
Slept 56s418ms
Slept 56s418ms
[ 3868.236828] suspend: exit suspend, ret = 0 (2013-03-05 02:53:11.013550710 UTC)
[ 3868.238030] dai_active 0, IISMOD d0001c00, IISCON 8030c638
[ 3869.158603] mmcblk0: error -110 sending status command, retrying
[ 3869.159351] mmcblk0: error -110 sending status command, retrying
[ 3869.160035] mmcblk0: error -110 sending status command, aborting
[ 3869.160162] end_request: I/O error, dev mmcblk0, sector 2681264
[ 3869.160235] Buffer I/O error on device mmcblk0p2, logical block 203830
[ 3869.160354] lost page write due to I/O error on mmcblk0p2
[ 3869.163046] mmcblk0: error -110 sending status command, retrying
[ 3869.163779] mmcblk0: error -110 sending status command, retrying
[ 3869.164453] mmcblk0: error -110 sending status command, aborting
[ 3869.164575] end_request: I/O error, dev mmcblk0, sector 1071928
[ 3869.164705] end_request: I/O error, dev mmcblk0, sector 1071936
[ 3869.164774] end_request: I/O error, dev mmcblk0, sector 1071944
[ 3869.164893] end_request: I/O error, dev mmcblk0, sector 1071952
[ 3869.164961] end_request: I/O error, dev mmcblk0, sector 1071960
[ 3869.165081] end_request: I/O error, dev mmcblk0, sector 1071968
[ 3869.165148] end_request: I/O error, dev mmcblk0, sector 1071976
[ 3869.165267] end_request: I/O error, dev mmcblk0, sector 1071984
[ 3869.165372] Aborting journal on device mmcblk0p2-8.
[ 3869.166731] mmcblk0: error -110 sending status command, retrying
[ 3869.167414] mmcblk0: error -110 sending status command, retrying
[ 3869.168159] mmcblk0: error -110 sending status command, aborting
[ 3869.168230] end_request: I/O error, dev mmcblk0, sector 1055256
[ 3869.168353] Buffer I/O error on device mmcblk0p2, logical block 579
[ 3869.168420] lost page write due to I/O error on mmcblk0p2
[ 3869.168560] JBD2: I/O error detected when updating journal superblock for mmcblk0p2-8.
[ 3869.170927] journal commit I/O error
[ 3869.172122] mmcblk0: error -110 sending status command, retrying
[ 3869.172794] mmcblk0: error -110 sending status command, retrying
[ 3869.173514] mmcblk0: error -110 sending status command, aborting
[ 3869.173589] end_request: I/O error, dev mmcblk0, sector 1050624
[ 3869.173710] Buffer I/O error on device mmcblk0p2, logical block 0
[ 3869.173777] lost page write due to I/O error on mmcblk0p2
[ 3869.180609] EXT4-fs error (device mmcblk0p2): ext4_journal_start_sb:296: Detected aborted journal
[ 3869.182200] EXT4-fs (mmcblk0p2): Remounting filesystem read-only
[ 3869.182717] EXT4-fs (mmcblk0p2): previous I/O error to superblock detected
[ 3869.184561] mmcblk0: error -110 sending status command, retrying
[ 3869.185227] mmcblk0: error -110 sending status command, retrying
[ 3869.185950] mmcblk0: error -110 sending status command, aborting
[ 3869.186020] end_request: I/O error, dev mmcblk0, sector 1050624
[ 3869.186141] Buffer I/O error on device mmcblk0p2, logical block 0
[ 3869.186258] lost page write due to I/O error on mmcblk0p2
[ 3869.196306] Kernel panic - not syncing: EXT4-fs panic from previous error
[ 3869.196319]
[ 3869.196503] Backtrace:
[ 3869.196654] [<c003e3b8>] (dump_backtrace+0x0/0x10c) from [<c0611280>] (dump_stack+0x18/0x1c)
[ 3869.196775] r6:c08527e0 r5:00000000 r4:c0897a08 r3:00000000
[ 3869.197086] [<c0611268>] (dump_stack+0x0/0x1c) from [<c06113e0>] (panic+0x80/0x198)
[ 3869.197219] [<c0611360>] (panic+0x0/0x198) from [<c0185320>] (__ext4_abort+0xd8/0xec)
[ 3869.197339] r3:88020840 r2:db367cb8 r1:db367cac r0:c077df58
[ 3869.197640] r7:db366000
[ 3869.197768] [<c018524c>] (__ext4_abort+0x4/0xec) from [<c01853b8>] (ext4_journal_start_sb+0x84/0x128)
[ 3869.197888] r6:0000002a r5:e713a000 r4:e70c5800
[ 3869.198143] [<c0185334>] (ext4_journal_start_sb+0x0/0x128) from [<c0178be8>] (ext4_create+0x4c/0x118)
[ 3869.198210] r8:e76fbe80 r7:c062ce80 r6:e7529800 r5:e7568288 r4:e7529800
[ 3869.198636] [<c0178b9c>] (ext4_create+0x0/0x118) from [<c010f0f8>] (vfs_create+0x90/0xbc)
[ 3869.198802] [<c010f068>] (vfs_create+0x0/0xbc) from [<c011111c>] (do_last.isra.37+0x5ec/0x6a0)
[ 3869.198871] r6:db367e90 r5:00020241 r4:db367ed8
[ 3869.199172] [<c0110b30>] (do_last.isra.37+0x0/0x6a0) from [<c0111414>] (path_openat+0xc0/0x3b0)
[ 3869.199298] [<c0111354>] (path_openat+0x0/0x3b0) from [<c01117f8>] (do_filp_open+0x34/0x88)
[ 3869.199375] [<c01117c4>] (do_filp_open+0x0/0x88) from [<c01027e8>] (do_sys_open+0xf0/0x188)
[ 3869.199495] r7:00000001 r6:0000002e r5:00020241 r4:d49d0000
[ 3869.199856] [<c01026f8>] (do_sys_open+0x0/0x188) from [<c01028a8>] (sys_open+0x28/0x2c)
[ 3869.199930] [<c0102880>] (sys_open+0x0/0x2c) from [<c003a980>] (ret_fast_syscall+0x0/0x30)
[ 3869.200055] Rebooting in 5 seconds..
[ 3874.199803] Restarting Linux version 3.0.50-Cyanogenmod-g2a11ce9 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 PREEMPT Sun Mar 3 20:47:31 PST 2013
[ 3874.199814]
[ 3874.203399] arch_reset: attempting watchdog reset
Thanks for any help or ideas people have!

Did you ever get this sorted? I came across your post while going through essentially the same process.
I was fine on Slim Bean 4.4.2 build 3 with marmite 8.3-bigmem. Moved to Slim build 4.2 and turned on encryption, and had a couple reboots and a freeze with the capacitive buttons lit. Updated to build 5 and had two more solid freezes. Ditched encryption and moved to CM 10.1 RC2 and started getting frequent reboots, to the point where it'd go through 3 or 4 in a 15 minute period if I wasn't touching it. Started learning more and pulled last_kmsg on a couple, and found essentially the same thing: I/O errors on mmcblk0 right after it wakes.
[ 166.283105] wakeup wake lock: alarm
[ 167.142198] mmc0: error -110 during resume (card was removed?)
...
[ 167.217818] EXT4-fs (mmcblk0p2): previous I/O error to superblock detected
[ 167.219107] mmcblk0: error -110 sending status command, retrying
[ 167.219824] mmcblk0: error -110 sending status command, retrying
[ 167.220546] mmcblk0: error -110 sending status command, aborting
[ 167.220615] end_request: I/O error, dev mmcblk0, sector 1050624
[ 167.220733] Buffer I/O error on device mmcblk0p2, logical block 0
[ 167.220799] lost page write due to I/O error on mmcblk0p2
[ 167.220932] Kernel panic - not syncing: EXT4-fs panic from previous error
Back to stock 4.1.1 and it's been running perfectly since. Looking for any ideas before I go wandering through that entire process again in an effort to narrow it down.

I never really figured it out. I gave up on CM10.1 and went to stock. I didn't get any more reboots after that, but was getting some app crashes.
Went to Slim bean build 4 & 5 a few weeks ago and that's been running fine.
I'm really liking slim, so i'm just going to stick with it.... until i get antsy and try CM again.

Rooted OPO reboot issue

I am not sure what happened but since I unlock the boot loader and rooted my phone, its randomly rebooting, something 2-3 times a day.
Is there any app or way to track what is causing the reboot? or is there any app which keep tracking the reboot and crate a dump before a reboot?
thanks,

Check last_kmsg in /proc/ and debug from there after your phone rebooted.
Sent from my One A0001 using Tapatalk

zephiK said:
Check last_kmsg in /proc/ and debug from there after your phone rebooted.
Sent from my One A0001 using Tapatalk
Click to expand...
Click to collapse
Thanks.
Can you help me to understand whats going on here?
These are few of the lines of that file.
Code:
[ 1533.863461] PM: resume of devices complete after 93.547 msecs
[ 1533.865986] Restarting tasks ... done.
[ 1533.871762] PM: suspend exit 2014-10-01 13:29:50.427938915 UTC
[ 1533.871919] PM: suspend entry 2014-10-01 13:29:50.428106571 UTC
[ 1533.871998] PM: Syncing filesystems ... done.
[ 1533.920040] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1533.922444] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1533.924521] Suspending console(s) (use no_console_suspend to debug)
[ 1533.948401] PM: suspend of devices complete after 22.040 msecs
[ 1533.949716] PM: late suspend of devices complete after 1.305 msecs
[ 1533.952192] PM: noirq suspend of devices complete after 2.467 msecs
[ 1533.952199] Disabling non-boot CPUs ...
[ 1533.955966] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1533.956381] Enabling non-boot CPUs ...
[ 1533.957570] CPU3 is up
[ 1533.958907] PM: noirq resume of devices complete after 1.322 msecs
[ 1533.960451] PM: early resume of devices complete after 0.775 msecs
[ 1534.055657] PM: resume of devices complete after 95.196 msecs
[ 1534.058107] Restarting tasks ... done.
[ 1534.068767] PM: suspend exit 2014-10-01 13:30:00.635457661 UTC
[ 1535.388171] PM: suspend entry 2014-10-01 13:30:01.954831201 UTC
[ 1535.388416] PM: Syncing filesystems ... done.
[ 1535.424494] Freezing user space processes ... (elapsed 0.005 seconds) done.
[ 1535.430427] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[ 1535.435304] Suspending console(s) (use no_console_suspend to debug)
[ 1535.473647] PM: suspend of devices complete after 31.282 msecs
[ 1535.480317] PM: late suspend of devices complete after 6.627 msecs
[ 1535.489901] PM: noirq suspend of devices complete after 9.540 msecs
[ 1535.489934] Disabling non-boot CPUs ...
[ 1535.491507] IRQ40 no longer affine to CPU3
[ 1535.496131] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1535.497150] Enabling non-boot CPUs ...
[ 1535.500570] CPU3 is up
[ 1535.505224] PM: noirq resume of devices complete after 4.601 msecs
[ 1535.510740] PM: early resume of devices complete after 3.668 msecs
[ 1535.604334] PM: resume of devices complete after 93.579 msecs
[ 1535.607148] Restarting tasks ... done.
[ 1535.612843] PM: suspend exit 2014-10-01 13:31:36.730796685 UTC
[ 1536.519999] IRQ40 no longer affine to CPU2
[ 1541.496023] PM: suspend entry 2014-10-01 13:31:42.613969808 UTC
[ 1541.496123] PM: Syncing filesystems ... done.
[ 1541.522496] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1541.525719] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[ 1541.528212] Suspending console(s) (use no_console_suspend to debug)
[ 1541.554479] PM: suspend of devices complete after 23.443 msecs
[ 1541.556122] PM: late suspend of devices complete after 1.631 msecs
[ 1541.559185] PM: noirq suspend of devices complete after 3.052 msecs
[ 1541.559195] Disabling non-boot CPUs ...
[ 1541.562072] IRQ40 no longer affine to CPU3
[ 1541.562326] IRQ200 no longer affine to CPU3
[ 1541.562340] IRQ203 no longer affine to CPU3
[ 1541.563762] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1541.564253] Enabling non-boot CPUs ...
[ 1541.565462] CPU3 is up
[ 1541.567105] PM: noirq resume of devices complete after 1.626 msecs
[ 1541.569127] PM: early resume of devices complete after 1.090 msecs
[ 1541.664971] PM: resume of devices complete after 95.831 msecs
[ 1541.668348] Restarting tasks ... done.
[ 1541.673806] PM: suspend exit 2014-10-01 13:32:07.631144902 UTC
[ 1541.862383] PM: suspend entry 2014-10-01 13:32:07.819720266 UTC
[ 1541.862445] PM: Syncing filesystems ... done.
[ 1541.877994] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1541.880891] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1541.883129] Suspending console(s) (use no_console_suspend to debug)
[ 1541.906508] PM: suspend of devices complete after 21.317 msecs
[ 1541.907756] PM: late suspend of devices complete after 1.239 msecs
[ 1541.910353] PM: noirq suspend of devices complete after 2.588 msecs
[ 1541.910361] Disabling non-boot CPUs ...
[ 1541.919369] IRQ40 no longer affine to CPU3
[ 1541.920591] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1541.921029] Enabling non-boot CPUs ...
[ 1541.922221] CPU1 is up
[ 1541.923429] CPU2 is up
[ 1541.924454] CPU3 is up
[ 1541.925840] PM: noirq resume of devices complete after 1.370 msecs
[ 1541.927451] PM: early resume of devices complete after 0.793 msecs
[ 1542.021123] PM: resume of devices complete after 93.661 msecs
[ 1542.023836] Restarting tasks ... done.
[ 1542.027551] PM: suspend exit 2014-10-01 13:32:50.629481812 UTC
[ 1542.329804] IRQ40 no longer affine to CPU1
[ 1542.385757] IRQ40 no longer affine to CPU2
[ 1544.971343] IRQ40 no longer affine to CPU2
[ 1545.422541] IRQ40 no longer affine to CPU2
[ 1545.774138] IRQ40 no longer affine to CPU2
[ 1546.418944] PM: suspend entry 2014-10-01 13:32:55.020850040 UTC
[ 1546.419365] PM: Syncing filesystems ... done.
[ 1546.482236] Freezing user space processes ... (elapsed 0.005 seconds) done.
[ 1546.488605] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[ 1546.493502] Suspending console(s) (use no_console_suspend to debug)
[ 1546.538630] PM: suspend of devices complete after 38.007 msecs
[ 1546.544648] PM: late suspend of devices complete after 5.972 msecs
[ 1546.553858] PM: noirq suspend of devices complete after 9.171 msecs
[ 1546.553888] Disabling non-boot CPUs ...
[ 1546.562239] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1546.563059] Enabling non-boot CPUs ...
[ 1546.566170] CPU3 is up
[ 1546.570721] PM: noirq resume of devices complete after 4.499 msecs
[ 1546.576560] PM: early resume of devices complete after 3.736 msecs
[ 1546.676910] PM: resume of devices complete after 100.325 msecs
[ 1546.679496] Restarting tasks ... done.
[ 1546.684082] PM: suspend exit 2014-10-01 13:33:48.643802258 UTC
[ 1546.808840] PM: suspend entry 2014-10-01 13:33:48.768556737 UTC
[ 1546.808968] PM: Syncing filesystems ... done.
[ 1546.821426] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1546.824002] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1546.826110] Suspending console(s) (use no_console_suspend to debug)
[ 1546.850122] PM: suspend of devices complete after 22.167 msecs
[ 1546.851563] PM: late suspend of devices complete after 1.431 msecs
[ 1546.854317] PM: noirq suspend of devices complete after 2.744 msecs
[ 1546.854326] Disabling non-boot CPUs ...
[ 1546.863064] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1546.863449] Enabling non-boot CPUs ...
[ 1546.866187] CPU2 is up
[ 1546.867084] CPU3 is up
[ 1546.868456] PM: noirq resume of devices complete after 1.358 msecs
[ 1546.870074] PM: early resume of devices complete after 0.906 msecs
[ 1546.963379] PM: resume of devices complete after 93.293 msecs
[ 1546.965928] Restarting tasks ... done.
[ 1546.972588] PM: suspend exit 2014-10-01 13:34:15.961335320 UTC
[ 1547.323124] IRQ40 no longer affine to CPU2
[ 1549.194072] IRQ40 no longer affine to CPU2
[ 1550.008913] wlan: [1161:E :HDD] hdd_tx_rx_pkt_cnt_stat_timer_handler: Disable split scan
[ 1550.032013] IRQ40 no longer affine to CPU2
[ 1555.717687] PM: suspend entry 2014-10-01 13:34:24.706410211 UTC
[ 1555.717932] PM: Syncing filesystems ... done.
[ 1555.776745] Freezing user space processes ... (elapsed 0.005 seconds) done.
[ 1555.783146] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[ 1555.787948] Suspending console(s) (use no_console_suspend to debug)
[ 1555.832462] PM: suspend of devices complete after 37.581 msecs
[ 1555.838351] PM: late suspend of devices complete after 5.851 msecs
[ 1555.893962] PM: noirq suspend of devices complete after 55.567 msecs
[ 1555.893996] Disabling non-boot CPUs ...
[ 1555.895767] IRQ40 no longer affine to CPU3
[ 1555.896510] IRQ200 no longer affine to CPU3
[ 1555.896551] IRQ203 no longer affine to CPU3
[ 1555.900484] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1555.901233] Enabling non-boot CPUs ...
[ 1555.904208] CPU3 is up
[ 1555.908627] PM: noirq resume of devices complete after 4.367 msecs
[ 1555.914622] PM: early resume of devices complete after 3.738 msecs
[ 1556.017445] PM: resume of devices complete after 102.797 msecs
[ 1556.020365] Restarting tasks ... done.
[ 1556.024867] PM: suspend exit 2014-10-01 13:34:46.646524265 UTC
[ 1556.038475] PM: suspend entry 2014-10-01 13:34:46.660131557 UTC
[ 1556.038544] PM: Syncing filesystems ... done.
[ 1556.078722] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1556.081278] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1556.083388] Suspending console(s) (use no_console_suspend to debug)
[ 1556.107520] PM: suspend of devices complete after 22.303 msecs
[ 1556.108756] PM: late suspend of devices complete after 1.228 msecs
[ 1556.111288] PM: noirq suspend of devices complete after 2.523 msecs
[ 1556.111295] Disabling non-boot CPUs ...
[ 1556.113948] IRQ40 no longer affine to CPU3
[ 1556.115083] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1556.115496] Enabling non-boot CPUs ...
[ 1556.116745] CPU3 is up
[ 1556.117993] PM: noirq resume of devices complete after 1.233 msecs
[ 1556.119455] PM: early resume of devices complete after 0.843 msecs
[ 1556.214770] PM: resume of devices complete after 95.303 msecs
[ 1556.217780] Restarting tasks ... done.
[ 1556.223861] PM: suspend exit 2014-10-01 13:35:09.415251184 UTC
[ 1556.308899] PM: suspend entry 2014-10-01 13:35:09.500287851 UTC
[ 1556.309031] PM: Syncing filesystems ... done.
[ 1556.323301] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1556.325831] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1556.327930] Suspending console(s) (use no_console_suspend to debug)
[ 1556.353351] PM: suspend of devices complete after 23.376 msecs
[ 1556.354786] PM: late suspend of devices complete after 1.424 msecs
[ 1556.357549] PM: noirq suspend of devices complete after 2.753 msecs
[ 1556.357558] Disabling non-boot CPUs ...
[ 1556.370526] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1556.370935] Enabling non-boot CPUs ...
[ 1556.372254] CPU1 is up
[ 1556.373207] CPU2 is up
[ 1556.376156] CPU3 is up
[ 1556.377458] PM: noirq resume of devices complete after 1.288 msecs
[ 1556.379091] PM: early resume of devices complete after 0.957 msecs
[ 1556.474335] PM: resume of devices complete after 95.233 msecs
[ 1556.476874] Restarting tasks ... done.
[ 1556.481273] PM: suspend exit 2014-10-01 13:35:14.653456026 UTC
[ 1556.481446] PM: suspend entry 2014-10-01 13:35:14.653630505 UTC
[ 1556.481549] PM: Syncing filesystems ... done.
[ 1556.533047] Freezing user space processes ...
[ 1556.534035] last active wakeup source: PowerManagerService.WakeLocks
[ 1556.534135]
[ 1556.534229] Freezing of tasks aborted after 0.000 seconds (49 tasks refusing to freeze, wq_busy=0):
[ 1556.534281]
[ 1556.534331] Restarting tasks ... done.
[ 1556.535614] PM: suspend exit 2014-10-01 13:35:14.707798369 UTC
[ 1556.535704] PM: suspend entry 2014-10-01 13:35:14.707888890 UTC
[ 1556.535824] PM: Syncing filesystems ... done.
[ 1556.587363] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1556.589881] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[ 1556.592282] Suspending console(s) (use no_console_suspend to debug)
[ 1556.616623] PM: suspend of devices complete after 22.482 msecs
[ 1556.617859] PM: late suspend of devices complete after 1.226 msecs
[ 1556.620446] PM: noirq suspend of devices complete after 2.578 msecs
[ 1556.620453] Disabling non-boot CPUs ...
[ 1556.623380] IRQ40 no longer affine to CPU1
[ 1556.631190] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1556.631583] Enabling non-boot CPUs ...
[ 1556.632688] CPU1 is up
[ 1556.633810] CPU2 is up
[ 1556.634870] CPU3 is up
[ 1556.636128] PM: noirq resume of devices complete after 1.243 msecs
[ 1556.637525] PM: early resume of devices complete after 0.775 msecs
[ 1556.731002] PM: resume of devices complete after 93.467 msecs
[ 1556.733603] Restarting tasks ... done.
[ 1556.738972] PM: suspend exit 2014-10-01 13:35:21.395209304 UTC
[ 1556.739081] PM: suspend entry 2014-10-01 13:35:21.395329720 UTC
[ 1556.739220] PM: Syncing filesystems ... done.
[ 1556.789639] Freezing user space processes ...
[ 1556.790561] last active wakeup source: PowerManagerService.WakeLocks
[ 1556.790706]
[ 1556.790760] Freezing of tasks aborted after 0.001 seconds (49 tasks refusing to freeze, wq_busy=0):
[ 1556.790855]
[ 1556.790908] Restarting tasks ... done.
[ 1556.792115] PM: suspend exit 2014-10-01 13:35:21.448363158 UTC
[ 1556.792236] PM: suspend entry 2014-10-01 13:35:21.448485033 UTC
[ 1556.792296] PM: Syncing filesystems ... done.
[ 1556.842320] Freezing user space processes ...
[ 1556.843224] active wakeup source: qcom_rx_wakelock
[ 1556.843371] active wakeup source: PowerManagerService.WakeLocks
[ 1556.843451]
[ 1556.843505] Freezing of tasks aborted after 0.001 seconds (48 tasks refusing to freeze, wq_busy=0):
[ 1556.843600]
[ 1556.843652] Restarting tasks ... done.
[ 1556.844796] PM: suspend exit 2014-10-01 13:35:21.501045658 UTC
[ 1557.042374] IRQ40 no longer affine to CPU1
[ 1558.478373] PM: suspend entry 2014-10-01 13:35:23.134594668 UTC
[ 1558.478768] PM: Syncing filesystems ... done.
[ 1558.519189] Freezing user space processes ... (elapsed 0.005 seconds) done.
[ 1558.525315] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[ 1558.530151] Suspending console(s) (use no_console_suspend to debug)
[ 1558.574109] PM: suspend of devices complete after 37.208 msecs
[ 1558.580194] PM: late suspend of devices complete after 6.041 msecs
[ 1558.590790] PM: noirq suspend of devices complete after 10.555 msecs
[ 1558.590825] Disabling non-boot CPUs ...
[ 1558.592341] IRQ40 no longer affine to CPU3
[ 1558.593043] IRQ200 no longer affine to CPU3
[ 1558.593082] IRQ203 no longer affine to CPU3
[ 1558.596873] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1558.597711] Enabling non-boot CPUs ...
[ 1558.600857] CPU3 is up
[ 1558.605227] PM: noirq resume of devices complete after 4.320 msecs
[ 1558.610932] PM: early resume of devices complete after 3.841 msecs
[ 1558.713293] PM: resume of devices complete after 102.336 msecs
[ 1558.716146] Restarting tasks ... done.
[ 1558.721069] PM: suspend exit 2014-10-01 13:37:15.800330197 UTC
[ 1559.596437] IRQ40 no longer affine to CPU2
[ 1561.518386] shineled----lcds_set_brightness: light the red ,value = 0
[ 1561.518927] shineled-------------i2c send data 0x4 0x0
[ 1561.519091] shineled----lcds_set_brightness: light the green ,value = 0
[ 1561.519934] shineled-------------i2c send data 0x5 0x0
[ 1561.520099] shineled----lcds_set_brightness: light the blue ,value = 0
[ 1561.520409] shineled-------------i2c send data 0x6 0x0
[ 1561.520579] shineled----sled_blink_store: buf = 0
[ 1561.520583] : count = 2
[ 1561.520782] shineled----sled_blink_store: totalMS = 5000: onMS = 490
[ 1561.520856] shineled----sled_blink_store: color_R = 0: color_G = 0: color_B = 0,
[ 1561.521165] shineled-------------i2c send data 0x1d 0x0
[ 1561.521412] shineled-------------i2c send data 0x0 0x1
[ 1563.497732] PM: suspend entry 2014-10-01 13:37:20.576976497 UTC
[ 1563.497822] PM: Syncing filesystems ... done.
[ 1563.537314] Freezing user space processes ... (elapsed 0.003 seconds) done.
[ 1563.540655] Freezing remaining freezable tasks ... (elapsed 0.002 seconds) done.
[ 1563.543337] Suspending console(s) (use no_console_suspend to debug)
[ 1563.569379] PM: suspend of devices complete after 23.447 msecs
[ 1563.571031] PM: late suspend of devices complete after 1.639 msecs
[ 1563.574730] PM: noirq suspend of devices complete after 3.688 msecs
[ 1563.574740] Disabling non-boot CPUs ...
[ 1563.577802] IRQ40 no longer affine to CPU3
[ 1563.578343] IRQ200 no longer affine to CPU3
[ 1563.578379] IRQ203 no longer affine to CPU3
[ 1563.580448] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1563.580921] Enabling non-boot CPUs ...
[ 1563.582222] CPU3 is up
[ 1563.583863] PM: noirq resume of devices complete after 1.624 msecs
[ 1563.585783] PM: early resume of devices complete after 1.019 msecs
[ 1563.683739] PM: resume of devices complete after 97.943 msecs
[ 1563.686395] Restarting tasks ... done.
[ 1563.692349] PM: suspend exit 2014-10-01 13:37:46.635030132 UTC
[ 1569.250796] PM: suspend entry 2014-10-01 13:37:52.193447682 UTC
[ 1569.251215] PM: Syncing filesystems ... done.
[ 1569.298202] Freezing user space processes ... (elapsed 0.005 seconds) done.
[ 1569.304532] Freezing remaining freezable tasks ... (elapsed 0.003 seconds) done.
[ 1569.309282] Suspending console(s) (use no_console_suspend to debug)
[ 1569.350057] PM: suspend of devices complete after 33.923 msecs
[ 1569.355931] PM: late suspend of devices complete after 5.838 msecs
[ 1569.364920] PM: noirq suspend of devices complete after 8.952 msecs
[ 1569.364951] Disabling non-boot CPUs ...
[ 1569.368793] IRQ40 no longer affine to CPU3
[ 1569.373541] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1569.374483] Enabling non-boot CPUs ...
[ 1569.377345] CPU3 is up
[ 1569.381912] PM: noirq resume of devices complete after 4.516 msecs
[ 1569.387872] PM: early resume of devices complete after 3.991 msecs
[ 1569.486761] PM: resume of devices complete after 98.861 msecs
[ 1569.489675] Restarting tasks ... done.
[ 1569.499077] PM: suspend exit 2014-10-01 13:40:15.822754189 UTC
[ 1569.585592] PM: suspend entry 2014-10-01 13:40:15.909268929 UTC
[ 1569.585697] PM: Syncing filesystems ... done.
[ 1569.594731] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1569.597237] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1569.599341] Suspending console(s) (use no_console_suspend to debug)
[ 1569.623577] PM: suspend of devices complete after 22.471 msecs
[ 1569.625008] PM: late suspend of devices complete after 1.421 msecs
[ 1569.627724] PM: noirq suspend of devices complete after 2.706 msecs
[ 1569.627733] Disabling non-boot CPUs ...
[ 1569.641001] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1569.641426] Enabling non-boot CPUs ...
[ 1569.644824] CPU1 is up
[ 1569.645878] CPU2 is up
[ 1569.646986] CPU3 is up
[ 1569.648289] PM: noirq resume of devices complete after 1.289 msecs
[ 1569.649933] PM: early resume of devices complete after 0.903 msecs
[ 1569.743290] PM: resume of devices complete after 93.345 msecs
[ 1569.746114] Restarting tasks ... done.
[ 1569.750721] PM: suspend exit 2014-10-01 13:41:16.630230571 UTC
[ 1569.786692] PM: suspend entry 2014-10-01 13:41:16.666201612 UTC
[ 1569.786755] PM: Syncing filesystems ... done.
[ 1569.801018] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1569.803382] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1569.805426] Suspending console(s) (use no_console_suspend to debug)
[ 1569.829412] PM: suspend of devices complete after 22.174 msecs
[ 1569.830658] PM: late suspend of devices complete after 1.235 msecs
[ 1569.833126] PM: noirq suspend of devices complete after 2.459 msecs
[ 1569.833134] Disabling non-boot CPUs ...
[ 1569.836014] IRQ40 no longer affine to CPU1
[ 1569.843056] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1569.843442] Enabling non-boot CPUs ...
[ 1569.844547] CPU1 is up
[ 1569.845649] CPU2 is up
[ 1569.846700] CPU3 is up
[ 1569.847883] PM: noirq resume of devices complete after 1.169 msecs
[ 1569.849397] PM: early resume of devices complete after 0.858 msecs
[ 1569.946217] PM: resume of devices complete after 96.810 msecs
[ 1569.949235] Restarting tasks ... done.
[ 1569.952400] PM: suspend exit 2014-10-01 13:41:18.478180934 UTC
[ 1569.952548] PM: suspend entry 2014-10-01 13:41:18.478330934 UTC
[ 1569.952617] PM: Syncing filesystems ... done.
[ 1570.003526] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 1570.006180] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 1570.008459] Suspending console(s) (use no_console_suspend to debug)
[ 1570.034603] PM: suspend of devices complete after 23.881 msecs
[ 1570.036184] PM: late suspend of devices complete after 1.569 msecs
[ 1570.039284] PM: noirq suspend of devices complete after 3.088 msecs
[ 1570.039293] Disabling non-boot CPUs ...
[ 1570.042310] IRQ40 no longer affine to CPU1
[ 1570.042557] IRQ200 no longer affine to CPU1
[ 1570.042567] IRQ203 no longer affine to CPU1
[ 1570.049207] IRQ40 no longer affine to CPU3
[ 1570.051989] CPU0: msm_cpu_pm_enter_sleep mode:3
[ 1570.052474] Enabling non-boot CPUs ...
[ 1570.055454] CPU1 is up
[ 1570.056514] CPU2 is up
[ 1570.057596] CPU3 is up
[ 1570.059191] PM: noirq resume of devices complete after 1.578 msecs
[ 1570.060955] PM: early resume of devices complete after 0.989 msecs
[ 1570.158264] PM: resume of devices complete after 97.297 msecs
[ 1570.161692] Restarting tasks ... done.
[ 1570.164716] PM: suspend exit 2014-10-01 13:41:48.376758109 UTC
[ 1570.164845] PM: suspend entry 2014-10-01 13:41:48.376887796 UTC
[ 1570.164907] PM: Syncing filesystems ... done.
[ 1570.214557] Freezing user space processes ...

here is the latest reboot
Code:
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-cyanogenmod-g0ad30e5 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Aug 19 12:06:24 PDT 2014
[ 0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974Pro-AC One+ A0001
[ 0.000000] Initialized persistent memory from 60000000-600fffff
[ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000
[ 0.000000] cma: Found secure_region, memory base 0x00000000, size 252 MiB, limit 0xffffffff
[ 0.000000] cma: Found adsp_region, memory base 0x00000000, size 63 MiB, limit 0xffffffff
[ 0.000000] cma: Found qsecom_region, memory base 0x00000000, size 17 MiB, limit 0xffffffff
[ 0.000000] cma: Found audio_region, memory base 0x00000000, size 12 MiB, limit 0xffffffff
[ 0.000000] cma: Found [email protected], memory base 0x0fa00000, size 5 MiB, limit 0xffffffff
[ 0.000000] cma: Found [email protected], memory base 0x05a00000, size 33 MiB, limit 0xffffffff
[ 0.000000] cma: Found [email protected], memory base 0x07b00000, size 5 MiB, limit 0xffffffff
[ 0.000000] cma: Found [email protected], memory base 0x08000000, size 82 MiB, limit 0xffffffff
[ 0.000000] cma: CMA: reserved 252 MiB at 0xb0400000 for secure_mem
[ 0.000000] cma: CMA: reserved 64 MiB at 0xac400000 for adsp_mem
[ 0.000000] cma: CMA: reserved 20 MiB at 0xab000000 for qseecom_mem
[ 0.000000] cma: CMA: reserved 16 MiB at 0xaa000000 for audio_mem
[ 0.000000] cma: CMA: reserved 5 MiB at 0x0fa00000 for (null)
[ 0.000000] cma: CMA: reserved 33 MiB at 0x05a00000 for peripheral_mem
[ 0.000000] cma: CMA: reserved 5 MiB at 0x07b00000 for tz_apps
[ 0.000000] cma: CMA: reserved 82 MiB at 0x08000000 for modem_mem
[ 0.000000] cma: CMA: reserved 16 MiB at 0x2e800000 for default region
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] IMEM DT static mapping successful
[ 0.000000] PERCPU: Embedded 7 pages/cpu @cea59000 s16128 r0 d12544 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 748288
[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=bacon user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.emmc=true androidboot.serialno=b2415ff8 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_1080p_cmd oppo.pcb_version=12 LCD_id<4 oppo.rf_version=66 maxcpus=2 androidboot.startupmode=charger androidboot.mode=kernel lk_version=V1.0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 90MB 40MB 2817MB = 2947MB total
[ 0.000000] Memory: 2563028k/2563028k available, 582700k reserved, 2006016K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0e9a000 (14920 kB)
[ 0.000000] .init : 0xc0f00000 - 0xc1015f00 (1112 kB)
[ 0.000000] .data : 0xc1016000 - 0xc10e9fa0 ( 848 kB)
[ 0.000000] .bss : 0xc10e9fc4 - 0xc1403a74 (3175 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000108] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000129] pid_max: default: 32768 minimum: 301
[ 0.000295] Security Framework initialized
[ 0.000313] SELinux: Initializing.
[ 0.000417] Mount-cache hash table entries: 512
[ 0.001294] Initializing cgroup subsys debug
[ 0.001309] Initializing cgroup subsys cpuacct
[ 0.001320] Initializing cgroup subsys freezer
[ 0.001372] CPU: Testing write buffer coherency: ok
[ 0.001626] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001703] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
[ 0.005623] Setting up static identity map for 0xaefac0 - 0xaefb48
[ 0.005646] MSM Memory Dump table set up
[ 0.007704] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007895] Brought up 2 CPUs
[ 0.007909] SMP: Total of 2 processors activated (76.80 BogoMIPS).
[ 0.024098] dummy:
[ 0.041131] NET: Registered protocol family 16
[ 0.043992] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.046024] KPI: Bootloader start count = 3366664704
[ 0.046035] KPI: Bootloader end count = 3938378880
[ 0.046044] KPI: Bootloader display count = 176190644
[ 0.046053] KPI: Bootloader load kernel count = 506387928
[ 0.046063] KPI: Kernel MPM timestamp = 239095
[ 0.046072] KPI: Kernel MPM Clock frequency = 32768
[ 0.046090] socinfo_print: v8, id=194, ver=1.1, raw_id=1972, raw_ver=1, hw_plat=8, hw_plat_ver=65536
[ 0.046095] accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609
[ 0.046436] msm_8974_init_gpiomux:1453 socinfo_get_version 10001
[ 0.066586] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
[ 0.092536] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[ 0.120553] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
[ 0.121100] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
[ 0.121630] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
[ 0.122258] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
[ 0.122783] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.123323] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.123845] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.124432] 8841_s3: 1050 mV normal idle
[ 0.124989] 8841_s4: 815 <--> 900 mV at 0 mV normal idle
[ 0.125548] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.126078] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.126632] 8941_s1: 1300 mV normal idle
[ 0.127192] 8941_s2: 2150 mV normal idle
[ 0.127753] 8941_s3: 1800 mV normal idle
[ 0.128327] 8941_l1: 1225 mV normal idle
[ 0.128880] 8941_l2: 1200 mV normal idle
[ 0.129454] 8941_l3: 1000 <--> 1225 mV at 1000 mV normal idle
[ 0.130014] 8941_l4: 1225 mV normal idle
[ 0.130580] 8941_l5: 1800 mV normal idle
[ 0.131144] 8941_l6: 1800 mV normal idle
[ 0.131706] 8941_l7: 1800 mV normal idle
[ 0.132308] 8941_l8: 1800 mV normal idle
[ 0.132881] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.133470] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.134035] 8941_l11: 1225 <--> 1350 mV at 1300 mV normal idle
[ 0.134604] 8941_l12: 1800 mV normal idle
[ 0.135120] 8941_l12_ao: 1800 mV normal idle
[ 0.135704] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.136252] 8941_l14: 1800 mV normal idle
[ 0.136842] 8941_l15: 2050 mV normal idle
[ 0.137414] 8941_l16: 2700 mV normal idle
[ 0.137982] 8941_l17: 2700 <--> 2850 mV at 2700 mV normal idle
[ 0.138550] 8941_l18: 2850 mV normal idle
[ 0.139128] 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle
[ 0.139695] 8941_l20: 2950 mV normal idle
[ 0.140280] 8941_l21: 2950 mV normal idle
[ 0.140860] 8941_l22: 3000 mV normal idle
[ 0.141432] 8941_l23: 2800 <--> 3000 mV at 2800 mV normal idle
[ 0.142075] 8941_l24: 3075 mV normal idle
[ 0.142628] 8941_lvs1:
[ 0.143148] 8941_lvs2:
[ 0.143642] 8941_lvs3:
[ 0.146747] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
[ 0.146761] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
[ 0.147148] krait0: 500 <--> 1120 mV at 900 mV fast normal idle
[ 0.147773] krait1: 500 <--> 1120 mV at 900 mV fast normal idle
[ 0.148380] krait2: 500 <--> 1120 mV at 900 mV fast normal idle
[ 0.148989] krait3: 500 <--> 1120 mV at 900 mV fast normal idle
[ 0.192375] msm-thermal qcom,msm-thermal.70: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[ 0.193270] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[ 0.193293] msm-thermal qcom,msm-thermal.70: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
[ 0.193488] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 0.194105] persistent_ram: found existing buffer, size 932036, start 515058
[ 0.442642] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 0.693052] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 0.943465] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 1.193872] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 1.444258] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 1.694645] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 1.945033] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 2.195421] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 2.445809] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 2.633716] console [ram-1] enabled
[ 2.633911] 8941_l18: Failed to create debugfs directory
[ 2.634309] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 2.634456] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 2.635579] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[ 2.638013] 8941_boost: 4500 mV
[ 2.638673] 8941_mvs1:
[ 2.638848] qcom,qpnp-regulator qpnp-regulator-ee113400: Failed to find supply parent
[ 2.639156] spmi qpnp-regulator-ee113400: Driver qcom,qpnp-regulator requests probe deferral
[ 2.639646] 8941_mvs2:
[ 2.639785] 8941_mvs2: supplied by 8941_boost
[ 2.644426] sps:BAM 0xf9984000 (va:0xc5ae0000) enabled: ver:0x6, number of pipes:20
[ 2.644515] sps:BAM 0xf9984000 is registered.
[ 2.644662] sps:sps is ready.
[ 2.647202] gdsc_venus:
[ 2.647729] gdsc_mdss:
[ 2.648199] gdsc_jpeg:
[ 2.648690] gdsc_vfe:
[ 2.649199] gdsc_oxili_gx:
[ 2.649373] gdsc_oxili_gx: supplied by 8841_s4_corner
[ 2.649860] gdsc_oxili_cx:
[ 2.650346] gdsc_usb_hsic:
[ 2.651277] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 2.658892] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5e00000
[ 2.659543] Physical OCMEM zone layout:
[ 2.659632] zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
[ 2.659778] zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
[ 2.659864] zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
[ 2.687488] bio: create slab <bio-0> at 0
[ 2.688651] platform spi_eth_phy_vreg.80: Driver reg-fixed-voltage requests probe deferral
[ 2.689793] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
[ 2.690045] ION-heap mm: Cannot specify alignment for this type of heap
[ 2.690221] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
[ 2.690470] ION-heap adsp: Cannot specify alignment for this type of heap
[ 2.690657] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 2.690995] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
[ 2.691274] cma: Assigned CMA region at 5a00000 to 17.qcom,ion-heap device
[ 2.691614] cma: Assigned CMA region at 8000000 to 1a.qcom,ion-heap device
[ 2.692036] ION heap system created
[ 2.692279] ION heap kmalloc created
[ 2.692394] ION heap mm created at 0xb0400000 with size fc00000
[ 2.692560] ION heap adsp created at 0xac400000 with size 3f00000
[ 2.692663] ION heap qsecom created at 0xab000000 with size 1100000
[ 2.692827] ION heap audio created at 0xaa000000 with size c04000
[ 2.692931] ION heap pil_1 created at 0x05a00000 with size 2100000
[ 2.693096] ION heap pil_2 created at 0x08000000 with size 5200000
[ 2.695939] SCSI subsystem initialized
[ 2.696227] usbcore: registered new interface driver usbfs
[ 2.696382] usbcore: registered new interface driver hub
[ 2.696675] usbcore: registered new device driver usb
[ 2.697330] Linux media interface: v0.10
[ 2.697521] Linux video capture interface: v2.00
[ 2.701294] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5d00000, with 3 ctx banks
[ 2.703586] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5d20000, with 3 ctx banks
[ 2.703946] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 2.706959] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5d40000, with 5 ctx banks
[ 2.709109] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c5d60000, with 3 ctx banks
[ 2.711196] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c5d80000, with 3 ctx banks
[ 2.713385] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
[ 2.713636] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
[ 2.713993] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
[ 2.714322] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
[ 2.714587] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
[ 2.714897] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
[ 2.715233] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
[ 2.715500] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
[ 2.715809] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
[ 2.716116] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
[ 2.716425] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
[ 2.716736] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
[ 2.717040] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[ 2.717355] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[ 2.717625] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
[ 2.717934] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
[ 2.718239] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
[ 2.720860] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 2.721590] Bluetooth: Core ver 2.16
[ 2.721724] NET: Registered protocol family 31
[ 2.721869] Bluetooth: HCI device and connection manager initialized
[ 2.721952] Bluetooth: HCI socket layer initialized
[ 2.722097] Bluetooth: L2CAP socket layer initialized
[ 2.722461] Bluetooth: SCO socket layer initialized
[ 2.722894] cfg80211: Calling CRDA to update world regulatory domain
[ 2.723070] cfg80211: World regulatory domain updated:
[ 2.723152] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.723297] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.723441] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.723586] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.723667] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 2.723810] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 2.724001] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 2.724085] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 2.724228] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 2.724622] nfc: nfc_init: NFC Core ver 0.1
[ 2.724759] NET: Registered protocol family 39
[ 2.725623] Switching to clocksource arch_sys_counter
[ 2.764172] NET: Registered protocol family 2
[ 2.764508] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.765305] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.766968] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.767746] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.767889] TCP: reno registered
[ 2.767978] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.768168] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.768631] NET: Registered protocol family 1
[ 2.769122] Trying to unpack rootfs image as initramfs...
[ 2.803884] Freeing initrd memory: 512K
[ 2.808009] Detected 9 counters on the L2CC PMU.
[ 2.810715] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[ 2.811488] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[ 2.811787] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[ 2.812568] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[ 2.812870] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[ 2.813735] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[ 2.814011] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[ 2.814900] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[ 2.815141] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[ 2.816130] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[ 2.816457] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[ 2.817311] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[ 2.817603] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[ 2.818535] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[ 2.818830] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
[ 2.819784] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
[ 2.820019] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
[ 2.820989] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
[ 2.823179] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[ 2.828787] pil_pronto fb21b000.qcom,pronto: using secure boot
[ 2.831275] pil_venus fdce0000.qcom,venus: using secure boot
[ 2.844701] NET: Registered protocol family 27
[ 2.852415] clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
[ 2.852587] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
[ 2.852737] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 4
[ 2.852819] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
[ 2.857035] L2 @ 300000 KHz
[ 2.857251] CPU0 @ 960000 KHz
[ 2.857334] CPU1 @ unknown rate. Forcing new rate.
[ 2.857649] CPU1 @ 300000 KHz
[ 2.857845] CPU2 @ unknown rate. Forcing new rate.
[ 2.858089] CPU2 @ 300000 KHz
[ 2.858442] CPU3 @ unknown rate. Forcing new rate.
[ 2.858680] CPU3 @ 300000 KHz
[ 2.872454] msm_rpm_log_probe: OK
[ 2.894704] mpm_counter: [ 2.894683]:(332429)
[ 2.900028] audit: initializing netlink socket (disabled)
[ 2.900085] type=2000 audit(2.880:1): initialized
[ 2.900608] highmem bounce pool size: 64 pages
[ 2.902941] fuse init (API version 7.18)
[ 2.903086] msgmni has been set to 1120
[ 2.904576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.904643] io scheduler noop registered (default)
[ 2.904679] io scheduler deadline registered
[ 2.904720] io scheduler row registered
[ 2.904826] io scheduler cfq registered
[ 2.904863] io scheduler test-iosched registered
[ 2.905027] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
[ 2.905981] gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio
[ 2.908404] gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp
[ 2.909093] lm3630_probe:yanghai.
[ 2.910887] lm3630_chip_init: bl_initvalue=80
[ 2.910923] lm3630_chip_init: bl_initvalue=80,222
[ 2.911370] lm3630_probe:yanghai client irq =0
[ 2.911433] lm3630_probe:yanghai----
[ 2.911468] lm3630_bl 2-0036: LM3630 backlight register OK.
[ 2.911547] i2c-core: driver [lm3630_bl] using legacy suspend method
[ 2.911583] i2c-core: driver [lm3630_bl] using legacy resume method
[ 2.911748] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5dc0000
[ 2.911797] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5d76000
[ 2.911947] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
[ 2.913269] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[ 2.913331] mdss_dsi_panel_init: Panel Name = jdi 1080p cmd mode dsi panel
[ 2.913539] mdss_dsi_parse_panel_features:1139 Partial update disabled
[ 2.913605] mdss_dsi_parse_panel_features: ulps feature disabled
[ 2.913640] mdss_dsi_panel_init: Continuous splash enabled
[ 2.913945] dsi_panel_device_register:1550, lcd 5v en gpio not specified
[ 2.914046] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c5d78800 ctrl_size=1f8 phy_base=c5d7ab00 phy_size=2b0
[ 2.966240] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
[ 2.966454] mdss_hw_init: MDP Rev=10020001
[ 2.967605] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
[ 2.967671] controller config is not present
[ 2.967708] mdss_dsi_pref_prim_panel:can't find panel phandle
[ 2.967773] mdss_dsi_ctrl_probe: can't find panel node 0:qcom,mdss_dsi_jdi_1080p_cmd
[ 2.967813] mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 29
[ 2.968831] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.5
[ 2.969410] mdss_fb_parse_dt: split framebuffer left=0 right=0
[ 2.969498] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
[ 2.969675] mdss_fb_parse_dt: split framebuffer left=0 right=0
[ 2.969753] mdss_fb_register: FrameBuffer[1] 1920x1080 registered successfully!
[ 2.982104] sps: BAM device 0xf9944000 is not registered yet.
[ 2.982145] sps:BAM 0xf9944000 is registered.
[ 2.983956] f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART
[ 2.984025] msm_hs_set_mctrl_locked:Failed.Clocks are OFF
[ 2.987904] diagchar initialized nowkgsl bus ib [0] = 2456000000
[ 2.989010] kgsl bus ib [1] = 3680000000
[ 2.989073] kgsl bus ib [2] = 4912000000
[ 2.989108] kgsl bus ib [3] = 7464000000
[ 2.989143] kgsl bus index is 3 for pwrlevel 0
[ 2.989205] kgsl bus index is 2 for pwrlevel 1
[ 2.989240] kgsl bus index is 2 for pwrlevel 2
[ 2.989303] kgsl bus index is 1 for pwrlevel 3
[ 2.989338] kgsl bus index is 0 for pwrlevel 4
[ 2.989819] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[ 2.990247] kgsl: num bus is 4
[ 2.993153] brd: module loaded
[ 2.994349] loop: module loaded
[ 2.999232] QSEECOM: qseecom_probe: support_bus_scaling=0x1
[ 2.999271] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
[ 2.999369] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
[ 2.999437] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
[ 2.999533] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 2.999626] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
[ 3.000170] yanghai shineld driver init
[ 3.000255] yuyi,sn3193 power end
[ 3.000320] SN3193_power:yuyi for SN3193_SDB gpio---
[ 3.105827] SN3193_probe:sn3193 probe
[ 3.106125] shineled-------------i2c send data 0x4 0x0
[ 3.106317] shineled-------------i2c send data 0x5 0x0
[ 3.106480] shineled-------------i2c send data 0x6 0x0
[ 3.106670] shineled-------------i2c send data 0x7 0x0
[ 3.106831] shineled-------------i2c send data 0x1d 0x0
[ 3.107019] shineled-------------i2c send data 0x0 0x1
[ 3.107117] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 3.107182] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 3.107265] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 3.107329] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 3.107406] Loading pn544 driver
[ 3.107468] yuyi,clk_prepare_enable,return ret = 0
[ 3.107540] pn544_probe : requesting IRQ 345
[ 3.125975] SCSI Media Changer driver v0.25
[ 3.126422] sps:BAM 0xf9944000 (va:0xc5da0000) enabled: ver:0x13, number of pipes:24
[ 3.126668] spi_qsd f9966000.spi: master is unqueued, this is deprecated
[ 3.130002] spi_qsd f9965000.spi: using default bus_num -1
[ 3.130210] spi_qsd f9965000.spi: master is unqueued, this is deprecated
[ 3.133833] tun: Universal TUN/TAP device driver, 1.6
[ 3.133897] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 3.133978] rmnet_init: BAM devices[9]
[ 3.136568] PPP generic driver version 2.4.2
[ 3.136648] PPP BSD Compression module registered
[ 3.136684] PPP Deflate Compression module registered
[ 3.136911] PPP MPPE Compression module registered
[ 3.136948] NET: Registered protocol family 24
[ 3.137026] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 3.137091] CSLIP: code copyright 1989 Regents of the University of California.
[ 3.137310] wcnss_wlan probed in built-in mode
[ 3.137860] usbcore: registered new interface driver asix
[ 3.137911] usbcore: registered new interface driver cdc_ether
[ 3.137987] usbcore: registered new interface driver net1080
[ 3.138036] usbcore: registered new interface driver cdc_subset
[ 3.138112] usbcore: registered new interface driver zaurus
[ 3.138227] usbcore: registered new interface driver cdc_ncm
[ 3.389104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.389914] usbcore: registered new interface driver cdc_acm
[ 3.389979] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.390015] Initializing USB Mass Storage driver...
[ 3.390092] usbcore: registered new interface driver usb-storage
[ 3.390128] USB Mass Storage support registered.
[ 3.390201] usbcore: registered new interface driver ums-alauda
[ 3.390246] usbcore: registered new interface driver ums-cypress
[ 3.390319] usbcore: registered new interface driver ums-datafab
[ 3.390367] usbcore: registered new interface driver ums_eneub6250
[ 3.390440] usbcore: registered new interface driver ums-freecom
[ 3.390486] usbcore: registered new interface driver ums-isd200
[ 3.390559] usbcore: registered new interface driver ums-jumpshot
[ 3.390632] usbcore: registered new interface driver ums-karma
[ 3.390679] usbcore: registered new interface driver ums-onetouch
[ 3.390752] usbcore: registered new interface driver ums-sddr09
[ 3.390798] usbcore: registered new interface driver ums-sddr55
[ 3.390872] usbcore: registered new interface driver ums-usbat
[ 3.390921] usbcore: registered new interface driver usb_ehset_test
[ 3.391351] mbim_init: initialize 1 instances
[ 3.391421] mbim_init: Initialized 1 ports
[ 3.392117] rndis_qc_init: initialize rndis QC instance
[ 3.392344] gadget: Mass Storage Function, version: 2009/09/11
[ 3.392381] gadget: Number of LUNs=1
[ 3.392446] lun0: LUN: removable file: (no medium)
[ 3.392589] gadget: android_usb ready
[ 3.393662] mousedev: PS/2 mouse device common for all mice
[ 3.393872] usbcore: registered new interface driver xpad
[ 3.393976] 8941_l22: Failed to create debugfs directory
[ 3.394055] 8941_s3: Failed to create debugfs directory
[ 3.895830] [syna] vendor id: 2
[ 4.174799] [syna]maxx=1080,maxy=2040,vkh=114
[ 4.174915] input: synaptics-rmi-ts as /devices/f9924000.i2c/i2c-2/2-0020/input/input0
[ 4.175018] [syna]maxx=1080,maxy=2040,vkh=114
[ 4.914293] [syna]maxx=1080,maxy=2040,vkh=114
[ 4.946324] using rtc device, qpnp_rtc, for alarms
[ 4.946367] qcom,qpnp-rtc qpnp-rtc-ee112a00: rtc core: registered qpnp_rtc as rtc0
[ 4.946565] i2c /dev entries driver
[ 4.947348] ocmem: Notifier registered for 1
[ 4.948521] msm_cci_probe: pdev ee0e1e00 device id = -1
[ 5.577043] msm_eeprom_platform_probe line 901
[ 5.663699] msm_sensor_power_up:985
[ 5.682492] msm_sensor_power_up exit
[ 5.682678] msm_sensor_power_down:1169
[ 5.694246] [syna]maxx=1080,maxy=2040,vkh=114
[ 5.699456] msm_sensor_power_down exit
[ 5.699933] msm_sensor_power_up:985

-greenboy- said:
here is the latest reboot
Code:
[ 0.000000] Booting Linux on physical CPU 0
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.0-cyanogenmod-g0ad30e5 ([email protected]) (gcc version 4.7 (GCC) ) #1 SMP PREEMPT Tue Aug 19 12:06:24 PDT 2014
[ 0.000000] CPU: ARMv7 Processor [512f06f1] revision 1 (ARMv7), cr=10c5387d
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, PIPT instruction cache
[ 0.000000] Machine: Qualcomm MSM 8974 (Flattened Device Tree), model: Qualcomm MSM 8974Pro-AC One+ A0001
[ 0.000000] Initialized persistent memory from 60000000-600fffff
[ 0.000000] Node qcom,mdss_fb_primary memblock_reserve memory 3200000-5000000
[ 0.000000] cma: Found secure_region, memory base 0x00000000, size 252 MiB, limit 0xffffffff
[ 0.000000] cma: Found adsp_region, memory base 0x00000000, size 63 MiB, limit 0xffffffff
[ 0.000000] cma: Found qsecom_region, memory base 0x00000000, size 17 MiB, limit 0xffffffff
[ 0.000000] cma: Found audio_region, memory base 0x00000000, size 12 MiB, limit 0xffffffff
[ 0.000000] cma: Found [email protected], memory base 0x0fa00000, size 5 MiB, limit 0xffffffff
[ 0.000000] cma: Found [email protected], memory base 0x05a00000, size 33 MiB, limit 0xffffffff
[ 0.000000] cma: Found [email protected], memory base 0x07b00000, size 5 MiB, limit 0xffffffff
[ 0.000000] cma: Found [email protected], memory base 0x08000000, size 82 MiB, limit 0xffffffff
[ 0.000000] cma: CMA: reserved 252 MiB at 0xb0400000 for secure_mem
[ 0.000000] cma: CMA: reserved 64 MiB at 0xac400000 for adsp_mem
[ 0.000000] cma: CMA: reserved 20 MiB at 0xab000000 for qseecom_mem
[ 0.000000] cma: CMA: reserved 16 MiB at 0xaa000000 for audio_mem
[ 0.000000] cma: CMA: reserved 5 MiB at 0x0fa00000 for (null)
[ 0.000000] cma: CMA: reserved 33 MiB at 0x05a00000 for peripheral_mem
[ 0.000000] cma: CMA: reserved 5 MiB at 0x07b00000 for tz_apps
[ 0.000000] cma: CMA: reserved 82 MiB at 0x08000000 for modem_mem
[ 0.000000] cma: CMA: reserved 16 MiB at 0x2e800000 for default region
[ 0.000000] Memory policy: ECC disabled, Data cache writealloc
[ 0.000000] IMEM DT static mapping successful
[ 0.000000] PERCPU: Embedded 7 pages/cpu @cea59000 s16128 r0 d12544 u32768
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 748288
[ 0.000000] Kernel command line: console=ttyHSL0,115200,n8 androidboot.hardware=bacon user_debug=31 msm_rtb.filter=0x3F ehci-hcd.park=3 androidboot.emmc=true androidboot.serialno=b2415ff8 androidboot.baseband=msm mdss_mdp.panel=1:dsi:0:qcom,mdss_dsi_jdi_1080p_cmd oppo.pcb_version=12 LCD_id<4 oppo.rf_version=66 maxcpus=2 androidboot.startupmode=charger androidboot.mode=kernel lk_version=V1.0
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Memory: 90MB 40MB 2817MB = 2947MB total
[ 0.000000] Memory: 2563028k/2563028k available, 582700k reserved, 2006016K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] vmalloc : 0xf0000000 - 0xff000000 ( 240 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xef800000 ( 760 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] .text : 0xc0008000 - 0xc0e9a000 (14920 kB)
[ 0.000000] .init : 0xc0f00000 - 0xc1015f00 (1112 kB)
[ 0.000000] .data : 0xc1016000 - 0xc10e9fa0 ( 848 kB)
[ 0.000000] .bss : 0xc10e9fc4 - 0xc1403a74 (3175 kB)
[ 0.000000] SLUB: Genslabs=11, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:16 nr_irqs:16 16
[ 0.000000] sched_clock: 32 bits at 19MHz, resolution 52ns, wraps every 223696ms
[ 0.000000] Switching to timer-based delay loop
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] kmemleak: Kernel memory leak detector disabled
[ 0.000108] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000)
[ 0.000129] pid_max: default: 32768 minimum: 301
[ 0.000295] Security Framework initialized
[ 0.000313] SELinux: Initializing.
[ 0.000417] Mount-cache hash table entries: 512
[ 0.001294] Initializing cgroup subsys debug
[ 0.001309] Initializing cgroup subsys cpuacct
[ 0.001320] Initializing cgroup subsys freezer
[ 0.001372] CPU: Testing write buffer coherency: ok
[ 0.001626] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.001703] hw perfevents: enabled with ARMv7 Krait PMU driver, 5 counters available
[ 0.005623] Setting up static identity map for 0xaefac0 - 0xaefb48
[ 0.005646] MSM Memory Dump table set up
[ 0.007704] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.007895] Brought up 2 CPUs
[ 0.007909] SMP: Total of 2 processors activated (76.80 BogoMIPS).
[ 0.024098] dummy:
[ 0.041131] NET: Registered protocol family 16
[ 0.043992] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.046024] KPI: Bootloader start count = 3366664704
[ 0.046035] KPI: Bootloader end count = 3938378880
[ 0.046044] KPI: Bootloader display count = 176190644
[ 0.046053] KPI: Bootloader load kernel count = 506387928
[ 0.046063] KPI: Kernel MPM timestamp = 239095
[ 0.046072] KPI: Kernel MPM Clock frequency = 32768
[ 0.046090] socinfo_print: v8, id=194, ver=1.1, raw_id=1972, raw_ver=1, hw_plat=8, hw_plat_ver=65536
[ 0.046095] accessory_chip=0, hw_plat_subtype=0, pmic_model=65537, pmic_die_revision=196609
[ 0.046436] msm_8974_init_gpiomux:1453 socinfo_get_version 10001
[ 0.066586] gpiochip_add: registered GPIOs 0 to 145 on device: msmgpio
[ 0.092536] msm_watchdog f9017000.qcom,wdt: MSM Watchdog Initialized
[ 0.120553] 8841_s1: 675 <--> 1050 mV at 0 mV normal idle
[ 0.121100] 8841_s1_ao: 675 <--> 1050 mV at 0 mV normal idle
[ 0.121630] 8841_s1_so: 675 <--> 1050 mV at 675 mV normal idle
[ 0.122258] 8841_s2: 500 <--> 1050 mV at 0 mV normal idle
[ 0.122783] 8841_s2_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.123323] 8841_s2_corner_ao: 0 <--> 0 mV at 0 mV normal idle
[ 0.123845] 8841_s2_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.124432] 8841_s3: 1050 mV normal idle
[ 0.124989] 8841_s4: 815 <--> 900 mV at 0 mV normal idle
[ 0.125548] 8841_s4_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.126078] 8841_s4_floor_corner: 0 <--> 0 mV at 0 mV normal idle
[ 0.126632] 8941_s1: 1300 mV normal idle
[ 0.127192] 8941_s2: 2150 mV normal idle
[ 0.127753] 8941_s3: 1800 mV normal idle
[ 0.128327] 8941_l1: 1225 mV normal idle
[ 0.128880] 8941_l2: 1200 mV normal idle
[ 0.129454] 8941_l3: 1000 <--> 1225 mV at 1000 mV normal idle
[ 0.130014] 8941_l4: 1225 mV normal idle
[ 0.130580] 8941_l5: 1800 mV normal idle
[ 0.131144] 8941_l6: 1800 mV normal idle
[ 0.131706] 8941_l7: 1800 mV normal idle
[ 0.132308] 8941_l8: 1800 mV normal idle
[ 0.132881] 8941_l9: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.133470] 8941_l10: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.134035] 8941_l11: 1225 <--> 1350 mV at 1300 mV normal idle
[ 0.134604] 8941_l12: 1800 mV normal idle
[ 0.135120] 8941_l12_ao: 1800 mV normal idle
[ 0.135704] 8941_l13: 1800 <--> 2950 mV at 2950 mV normal idle
[ 0.136252] 8941_l14: 1800 mV normal idle
[ 0.136842] 8941_l15: 2050 mV normal idle
[ 0.137414] 8941_l16: 2700 mV normal idle
[ 0.137982] 8941_l17: 2700 <--> 2850 mV at 2700 mV normal idle
[ 0.138550] 8941_l18: 2850 mV normal idle
[ 0.139128] 8941_l19: 2900 <--> 3350 mV at 2900 mV normal idle
[ 0.139695] 8941_l20: 2950 mV normal idle
[ 0.140280] 8941_l21: 2950 mV normal idle
[ 0.140860] 8941_l22: 3000 mV normal idle
[ 0.141432] 8941_l23: 2800 <--> 3000 mV at 2800 mV normal idle
[ 0.142075] 8941_l24: 3075 mV normal idle
[ 0.142628] 8941_lvs1:
[ 0.143148] 8941_lvs2:
[ 0.143642] 8941_lvs3:
[ 0.146747] PDN krait_pdn_phase_scaling_init: eFuse phase scaling factor = 1/4
[ 0.146761] PDN krait_pdn_phase_scaling_init: initial phase scaling factor = 1/4
[ 0.147148] krait0: 500 <--> 1120 mV at 900 mV fast normal idle
[ 0.147773] krait1: 500 <--> 1120 mV at 900 mV fast normal idle
[ 0.148380] krait2: 500 <--> 1120 mV at 900 mV fast normal idle
[ 0.148989] krait3: 500 <--> 1120 mV at 900 mV fast normal idle
[ 0.192375] msm-thermal qcom,msm-thermal.70: probe_psm:Failed reading node=/soc/qcom,msm-thermal, key=qcom,pmic-sw-mode-temp. err=-22. KTM continues
[ 0.193270] msm_thermal:vdd_restriction_reg_init Defer vdd rstr freq init.
[ 0.193293] msm-thermal qcom,msm-thermal.70: probe_ocr:Failed reading node=/soc/qcom,msm-thermal, key=qti,pmic-opt-curr-temp. KTM continues
[ 0.193488] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 0.194105] persistent_ram: found existing buffer, size 932036, start 515058
[ 0.442642] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 0.693052] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 0.943465] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 1.193872] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 1.444258] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 1.694645] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 1.945033] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 2.195421] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 2.445809] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 2.633716] console [ram-1] enabled
[ 2.633911] 8941_l18: Failed to create debugfs directory
[ 2.634309] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 2.634456] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 2.635579] msm-jtag-fuse fc4be024.jtagfuse: JTag Fuse initialized
[ 2.638013] 8941_boost: 4500 mV
[ 2.638673] 8941_mvs1:
[ 2.638848] qcom,qpnp-regulator qpnp-regulator-ee113400: Failed to find supply parent
[ 2.639156] spmi qpnp-regulator-ee113400: Driver qcom,qpnp-regulator requests probe deferral
[ 2.639646] 8941_mvs2:
[ 2.639785] 8941_mvs2: supplied by 8941_boost
[ 2.644426] sps:BAM 0xf9984000 (va:0xc5ae0000) enabled: ver:0x6, number of pipes:20
[ 2.644515] sps:BAM 0xf9984000 is registered.
[ 2.644662] sps:sps is ready.
[ 2.647202] gdsc_venus:
[ 2.647729] gdsc_mdss:
[ 2.648199] gdsc_jpeg:
[ 2.648690] gdsc_vfe:
[ 2.649199] gdsc_oxili_gx:
[ 2.649373] gdsc_oxili_gx: supplied by 8841_s4_corner
[ 2.649860] gdsc_oxili_cx:
[ 2.650346] gdsc_usb_hsic:
[ 2.651277] AXI: msm_bus_fabric_init_driver(): msm_bus_fabric_init_driver
[ 2.658892] msm_ocmem fdd00000.qcom,ocmem: OCMEM Virtual addr c5e00000
[ 2.659543] Physical OCMEM zone layout:
[ 2.659632] zone graphics : 0xfec00000 - 0xfecfffff (1024 KB)
[ 2.659778] zone lp_audio : 0xfed00000 - 0xfed7ffff ( 512 KB)
[ 2.659864] zone video : 0xfed00000 - 0xfed7ffff ( 512 KB)
[ 2.687488] bio: create slab <bio-0> at 0
[ 2.688651] platform spi_eth_phy_vreg.80: Driver reg-fixed-voltage requests probe deferral
[ 2.689793] cma: Assigned CMA region at 0 to 8.qcom,ion-heap device
[ 2.690045] ION-heap mm: Cannot specify alignment for this type of heap
[ 2.690221] cma: Assigned CMA region at 0 to 16.qcom,ion-heap device
[ 2.690470] ION-heap adsp: Cannot specify alignment for this type of heap
[ 2.690657] cma: Assigned CMA region at 0 to 1b.qcom,ion-heap device
[ 2.690995] cma: Assigned CMA region at 0 to 1c.qcom,ion-heap device
[ 2.691274] cma: Assigned CMA region at 5a00000 to 17.qcom,ion-heap device
[ 2.691614] cma: Assigned CMA region at 8000000 to 1a.qcom,ion-heap device
[ 2.692036] ION heap system created
[ 2.692279] ION heap kmalloc created
[ 2.692394] ION heap mm created at 0xb0400000 with size fc00000
[ 2.692560] ION heap adsp created at 0xac400000 with size 3f00000
[ 2.692663] ION heap qsecom created at 0xab000000 with size 1100000
[ 2.692827] ION heap audio created at 0xaa000000 with size c04000
[ 2.692931] ION heap pil_1 created at 0x05a00000 with size 2100000
[ 2.693096] ION heap pil_2 created at 0x08000000 with size 5200000
[ 2.695939] SCSI subsystem initialized
[ 2.696227] usbcore: registered new interface driver usbfs
[ 2.696382] usbcore: registered new interface driver hub
[ 2.696675] usbcore: registered new device driver usb
[ 2.697330] Linux media interface: v0.10
[ 2.697521] Linux video capture interface: v2.00
[ 2.701294] msm_iommu_v1 fda64000.qcom,iommu: device jpeg_iommu mapped at c5d00000, with 3 ctx banks
[ 2.703586] msm_iommu_v1 fd928000.qcom,iommu: device mdp_iommu mapped at c5d20000, with 3 ctx banks
[ 2.703946] msm_thermal:msm_thermal_get_freq_table error reading cpufreq table
[ 2.706959] msm_iommu_v1 fdc84000.qcom,iommu: device venus_iommu mapped at c5d40000, with 5 ctx banks
[ 2.709109] msm_iommu_v1 fdb10000.qcom,iommu: device kgsl_iommu mapped at c5d60000, with 3 ctx banks
[ 2.711196] msm_iommu_v1 fda44000.qcom,iommu: device vfe_iommu mapped at c5d80000, with 3 ctx banks
[ 2.713385] msm_iommu_ctx_v1 fda6c000.qcom,iommu-ctx: context jpeg_enc0 using bank 0
[ 2.713636] msm_iommu_ctx_v1 fda6d000.qcom,iommu-ctx: context jpeg_enc1 using bank 1
[ 2.713993] msm_iommu_ctx_v1 fda6e000.qcom,iommu-ctx: context jpeg_dec using bank 2
[ 2.714322] msm_iommu_ctx_v1 fd930000.qcom,iommu-ctx: context mdp_0 using bank 0
[ 2.714587] msm_iommu_ctx_v1 fd931000.qcom,iommu-ctx: context mdp_1 using bank 1
[ 2.714897] msm_iommu_ctx_v1 fd932000.qcom,iommu-ctx: context mdp_2 using bank 2
[ 2.715233] msm_iommu_ctx_v1 fdc8c000.qcom,iommu-ctx: context venus_ns using bank 0
[ 2.715500] msm_iommu_ctx_v1 fdc8d000.qcom,iommu-ctx: context venus_sec_bitstream using bank 1
[ 2.715809] msm_iommu_ctx_v1 fdc8e000.qcom,iommu-ctx: context venus_fw using bank 2
[ 2.716116] msm_iommu_ctx_v1 fdc8f000.qcom,iommu-ctx: context venus_sec_pixel using bank 3
[ 2.716425] msm_iommu_ctx_v1 fdc90000.qcom,iommu-ctx: context venus_sec_non_pixel using bank 4
[ 2.716736] msm_iommu_ctx_v1 fdb18000.qcom,iommu-ctx: context gfx3d_user using bank 0
[ 2.717040] msm_iommu_ctx_v1 fdb19000.qcom,iommu-ctx: context gfx3d_priv using bank 1
[ 2.717355] msm_iommu_ctx_v1 fdb1a000.qcom,iommu-ctx: context gfx3d_spare using bank 2
[ 2.717625] msm_iommu_ctx_v1 fda4c000.qcom,iommu-ctx: context vfe0 using bank 0
[ 2.717934] msm_iommu_ctx_v1 fda4d000.qcom,iommu-ctx: context vfe1 using bank 1
[ 2.718239] msm_iommu_ctx_v1 fda4e000.qcom,iommu-ctx: context cpp using bank 2
[ 2.720860] Advanced Linux Sound Architecture Driver Version 1.0.25.
[ 2.721590] Bluetooth: Core ver 2.16
[ 2.721724] NET: Registered protocol family 31
[ 2.721869] Bluetooth: HCI device and connection manager initialized
[ 2.721952] Bluetooth: HCI socket layer initialized
[ 2.722097] Bluetooth: L2CAP socket layer initialized
[ 2.722461] Bluetooth: SCO socket layer initialized
[ 2.722894] cfg80211: Calling CRDA to update world regulatory domain
[ 2.723070] cfg80211: World regulatory domain updated:
[ 2.723152] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 2.723297] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.723441] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 2.723586] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 2.723667] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 2.723810] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 2.724001] cfg80211: (5490000 KHz - 5710000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 2.724085] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (300 mBi, 2000 mBm)
[ 2.724228] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm)
[ 2.724622] nfc: nfc_init: NFC Core ver 0.1
[ 2.724759] NET: Registered protocol family 39
[ 2.725623] Switching to clocksource arch_sys_counter
[ 2.764172] NET: Registered protocol family 2
[ 2.764508] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.765305] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.766968] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.767746] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.767889] TCP: reno registered
[ 2.767978] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.768168] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.768631] NET: Registered protocol family 1
[ 2.769122] Trying to unpack rootfs image as initramfs...
[ 2.803884] Freeing initrd memory: 512K
[ 2.808009] Detected 9 counters on the L2CC PMU.
[ 2.810715] gpiochip_add: registered GPIOs 992 to 1023 on device: smp2p
[ 2.811488] gpiochip_add: registered GPIOs 960 to 991 on device: smp2p
[ 2.811787] gpiochip_add: registered GPIOs 928 to 959 on device: smp2p
[ 2.812568] gpiochip_add: registered GPIOs 896 to 927 on device: smp2p
[ 2.812870] gpiochip_add: registered GPIOs 864 to 895 on device: slave-kernel
[ 2.813735] gpiochip_add: registered GPIOs 832 to 863 on device: master-kernel
[ 2.814011] gpiochip_add: registered GPIOs 800 to 831 on device: smp2p
[ 2.814900] gpiochip_add: registered GPIOs 768 to 799 on device: smp2p
[ 2.815141] gpiochip_add: registered GPIOs 736 to 767 on device: slave-kernel
[ 2.816130] gpiochip_add: registered GPIOs 704 to 735 on device: master-kernel
[ 2.816457] gpiochip_add: registered GPIOs 672 to 703 on device: smp2p
[ 2.817311] gpiochip_add: registered GPIOs 640 to 671 on device: smp2p
[ 2.817603] gpiochip_add: registered GPIOs 608 to 639 on device: slave-kernel
[ 2.818535] gpiochip_add: registered GPIOs 576 to 607 on device: master-kernel
[ 2.818830] gpiochip_add: registered GPIOs 544 to 575 on device: rdbg
[ 2.819784] gpiochip_add: registered GPIOs 512 to 543 on device: rdbg
[ 2.820019] gpiochip_add: registered GPIOs 480 to 511 on device: rdbg
[ 2.820989] gpiochip_add: registered GPIOs 448 to 479 on device: rdbg
[ 2.823179] pil-q6v5-lpass fe200000.qcom,lpass: using secure boot
[ 2.828787] pil_pronto fb21b000.qcom,pronto: using secure boot
[ 2.831275] pil_venus fdce0000.qcom,venus: using secure boot
[ 2.844701] NET: Registered protocol family 27
[ 2.852415] clock-krait-8974 f9016000.qcom,clock-krait: PVS config version: 1
[ 2.852587] clock-krait-8974 f9016000.qcom,clock-krait: Speed bin: 3
[ 2.852737] clock-krait-8974 f9016000.qcom,clock-krait: PVS bin: 4
[ 2.852819] clock-krait-8974 f9016000.qcom,clock-krait: PVS version: 1
[ 2.857035] L2 @ 300000 KHz
[ 2.857251] CPU0 @ 960000 KHz
[ 2.857334] CPU1 @ unknown rate. Forcing new rate.
[ 2.857649] CPU1 @ 300000 KHz
[ 2.857845] CPU2 @ unknown rate. Forcing new rate.
[ 2.858089] CPU2 @ 300000 KHz
[ 2.858442] CPU3 @ unknown rate. Forcing new rate.
[ 2.858680] CPU3 @ 300000 KHz
[ 2.872454] msm_rpm_log_probe: OK
[ 2.894704] mpm_counter: [ 2.894683]:(332429)
[ 2.900028] audit: initializing netlink socket (disabled)
[ 2.900085] type=2000 audit(2.880:1): initialized
[ 2.900608] highmem bounce pool size: 64 pages
[ 2.902941] fuse init (API version 7.18)
[ 2.903086] msgmni has been set to 1120
[ 2.904576] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.904643] io scheduler noop registered (default)
[ 2.904679] io scheduler deadline registered
[ 2.904720] io scheduler row registered
[ 2.904826] io scheduler cfq registered
[ 2.904863] io scheduler test-iosched registered
[ 2.905027] gpiochip_add: registered GPIOs 444 to 447 on device: pm8841-mpp
[ 2.905981] gpiochip_add: registered GPIOs 408 to 443 on device: pm8941-gpio
[ 2.908404] gpiochip_add: registered GPIOs 401 to 407 on device: pm8941-mpp
[ 2.909093] lm3630_probe:yanghai.
[ 2.910887] lm3630_chip_init: bl_initvalue=80
[ 2.910923] lm3630_chip_init: bl_initvalue=80,222
[ 2.911370] lm3630_probe:yanghai client irq =0
[ 2.911433] lm3630_probe:yanghai----
[ 2.911468] lm3630_bl 2-0036: LM3630 backlight register OK.
[ 2.911547] i2c-core: driver [lm3630_bl] using legacy suspend method
[ 2.911583] i2c-core: driver [lm3630_bl] using legacy resume method
[ 2.911748] mdss_mdp_probe: MDP HW Base phy_Address=0xfd900000 virt=0xc5dc0000
[ 2.911797] mdss_mdp_probe: MDSS VBIF HW Base phy_Address=0xfd924000 virt=0xc5d76000
[ 2.911947] mdss_mdp_parse_dt_prop_len: Error from prop qcom,mdss-clk-levels : spec error in device tree
[ 2.913269] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->0
[ 2.913331] mdss_dsi_panel_init: Panel Name = jdi 1080p cmd mode dsi panel
[ 2.913539] mdss_dsi_parse_panel_features:1139 Partial update disabled
[ 2.913605] mdss_dsi_parse_panel_features: ulps feature disabled
[ 2.913640] mdss_dsi_panel_init: Continuous splash enabled
[ 2.913945] dsi_panel_device_register:1550, lcd 5v en gpio not specified
[ 2.914046] mdss_dsi_retrieve_ctrl_resources: ctrl_base=c5d78800 ctrl_size=1f8 phy_base=c5d7ab00 phy_size=2b0
[ 2.966240] mdss_register_panel: adding framebuffer device fd922800.qcom,mdss_dsi
[ 2.966454] mdss_hw_init: MDP Rev=10020001
[ 2.967605] mdss_dsi_ctrl_probe: DSI Ctrl name = MDSS DSI CTRL->1
[ 2.967671] controller config is not present
[ 2.967708] mdss_dsi_pref_prim_panel:can't find panel phandle
[ 2.967773] mdss_dsi_ctrl_probe: can't find panel node 0:qcom,mdss_dsi_jdi_1080p_cmd
[ 2.967813] mdss_dsi_ctrl: probe of fd922e00.qcom,mdss_dsi failed with error 29
[ 2.968831] mdss_register_panel: adding framebuffer device qcom,mdss_wb_panel.5
[ 2.969410] mdss_fb_parse_dt: split framebuffer left=0 right=0
[ 2.969498] mdss_fb_register: FrameBuffer[0] 1080x1920 registered successfully!
[ 2.969675] mdss_fb_parse_dt: split framebuffer left=0 right=0
[ 2.969753] mdss_fb_register: FrameBuffer[1] 1920x1080 registered successfully!
[ 2.982104] sps: BAM device 0xf9944000 is not registered yet.
[ 2.982145] sps:BAM 0xf9944000 is registered.
[ 2.983956] f995d000.uart: ttyHS0 at MMIO 0xf995d000 (irq = 145) is a MSM HS UART
[ 2.984025] msm_hs_set_mctrl_locked:Failed.Clocks are OFF
[ 2.987904] diagchar initialized nowkgsl bus ib [0] = 2456000000
[ 2.989010] kgsl bus ib [1] = 3680000000
[ 2.989073] kgsl bus ib [2] = 4912000000
[ 2.989108] kgsl bus ib [3] = 7464000000
[ 2.989143] kgsl bus index is 3 for pwrlevel 0
[ 2.989205] kgsl bus index is 2 for pwrlevel 1
[ 2.989240] kgsl bus index is 2 for pwrlevel 2
[ 2.989303] kgsl bus index is 1 for pwrlevel 3
[ 2.989338] kgsl bus index is 0 for pwrlevel 4
[ 2.989819] kgsl kgsl-3d0: |kgsl_iommu_init| MMU type set for device is IOMMU
[ 2.990247] kgsl: num bus is 4
[ 2.993153] brd: module loaded
[ 2.994349] loop: module loaded
[ 2.999232] QSEECOM: qseecom_probe: support_bus_scaling=0x1
[ 2.999271] QSEECOM: qseecom_probe: disk-encrypt-pipe-pair=0x2
[ 2.999369] QSEECOM: qseecom_probe: file-encrypt-pipe-pair=0x0
[ 2.999437] QSEECOM: qseecom_probe: hlos-ce-hw-instance=0x1
[ 2.999533] QSEECOM: qseecom_probe: qsee-ce-hw-instance=0x0
[ 2.999626] QSEECOM: qseecom_probe: secure app region addr=0x7b00000 size=0x500000
[ 3.000170] yanghai shineld driver init
[ 3.000255] yuyi,sn3193 power end
[ 3.000320] SN3193_power:yuyi for SN3193_SDB gpio---
[ 3.105827] SN3193_probe:sn3193 probe
[ 3.106125] shineled-------------i2c send data 0x4 0x0
[ 3.106317] shineled-------------i2c send data 0x5 0x0
[ 3.106480] shineled-------------i2c send data 0x6 0x0
[ 3.106670] shineled-------------i2c send data 0x7 0x0
[ 3.106831] shineled-------------i2c send data 0x1d 0x0
[ 3.107019] shineled-------------i2c send data 0x0 0x1
[ 3.107117] i2c-core: driver [tabla-i2c-core] using legacy suspend method
[ 3.107182] i2c-core: driver [tabla-i2c-core] using legacy resume method
[ 3.107265] i2c-core: driver [wcd9xxx-i2c-core] using legacy suspend method
[ 3.107329] i2c-core: driver [wcd9xxx-i2c-core] using legacy resume method
[ 3.107406] Loading pn544 driver
[ 3.107468] yuyi,clk_prepare_enable,return ret = 0
[ 3.107540] pn544_probe : requesting IRQ 345
[ 3.125975] SCSI Media Changer driver v0.25
[ 3.126422] sps:BAM 0xf9944000 (va:0xc5da0000) enabled: ver:0x13, number of pipes:24
[ 3.126668] spi_qsd f9966000.spi: master is unqueued, this is deprecated
[ 3.130002] spi_qsd f9965000.spi: using default bus_num -1
[ 3.130210] spi_qsd f9965000.spi: master is unqueued, this is deprecated
[ 3.133833] tun: Universal TUN/TAP device driver, 1.6
[ 3.133897] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 3.133978] rmnet_init: BAM devices[9]
[ 3.136568] PPP generic driver version 2.4.2
[ 3.136648] PPP BSD Compression module registered
[ 3.136684] PPP Deflate Compression module registered
[ 3.136911] PPP MPPE Compression module registered
[ 3.136948] NET: Registered protocol family 24
[ 3.137026] SLIP: version 0.8.4-NET3.019-NEWTTY (dynamic channels, max=256) (6 bit encapsulation enabled).
[ 3.137091] CSLIP: code copyright 1989 Regents of the University of California.
[ 3.137310] wcnss_wlan probed in built-in mode
[ 3.137860] usbcore: registered new interface driver asix
[ 3.137911] usbcore: registered new interface driver cdc_ether
[ 3.137987] usbcore: registered new interface driver net1080
[ 3.138036] usbcore: registered new interface driver cdc_subset
[ 3.138112] usbcore: registered new interface driver zaurus
[ 3.138227] usbcore: registered new interface driver cdc_ncm
[ 3.389104] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.389914] usbcore: registered new interface driver cdc_acm
[ 3.389979] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 3.390015] Initializing USB Mass Storage driver...
[ 3.390092] usbcore: registered new interface driver usb-storage
[ 3.390128] USB Mass Storage support registered.
[ 3.390201] usbcore: registered new interface driver ums-alauda
[ 3.390246] usbcore: registered new interface driver ums-cypress
[ 3.390319] usbcore: registered new interface driver ums-datafab
[ 3.390367] usbcore: registered new interface driver ums_eneub6250
[ 3.390440] usbcore: registered new interface driver ums-freecom
[ 3.390486] usbcore: registered new interface driver ums-isd200
[ 3.390559] usbcore: registered new interface driver ums-jumpshot
[ 3.390632] usbcore: registered new interface driver ums-karma
[ 3.390679] usbcore: registered new interface driver ums-onetouch
[ 3.390752] usbcore: registered new interface driver ums-sddr09
[ 3.390798] usbcore: registered new interface driver ums-sddr55
[ 3.390872] usbcore: registered new interface driver ums-usbat
[ 3.390921] usbcore: registered new interface driver usb_ehset_test
[ 3.391351] mbim_init: initialize 1 instances
[ 3.391421] mbim_init: Initialized 1 ports
[ 3.392117] rndis_qc_init: initialize rndis QC instance
[ 3.392344] gadget: Mass Storage Function, version: 2009/09/11
[ 3.392381] gadget: Number of LUNs=1
[ 3.392446] lun0: LUN: removable file: (no medium)
[ 3.392589] gadget: android_usb ready
[ 3.393662] mousedev: PS/2 mouse device common for all mice
[ 3.393872] usbcore: registered new interface driver xpad
[ 3.393976] 8941_l22: Failed to create debugfs directory
[ 3.394055] 8941_s3: Failed to create debugfs directory
[ 3.895830] [syna] vendor id: 2
[ 4.174799] [syna]maxx=1080,maxy=2040,vkh=114
[ 4.174915] input: synaptics-rmi-ts as /devices/f9924000.i2c/i2c-2/2-0020/input/input0
[ 4.175018] [syna]maxx=1080,maxy=2040,vkh=114
[ 4.914293] [syna]maxx=1080,maxy=2040,vkh=114
[ 4.946324] using rtc device, qpnp_rtc, for alarms
[ 4.946367] qcom,qpnp-rtc qpnp-rtc-ee112a00: rtc core: registered qpnp_rtc as rtc0
[ 4.946565] i2c /dev entries driver
[ 4.947348] ocmem: Notifier registered for 1
[ 4.948521] msm_cci_probe: pdev ee0e1e00 device id = -1
[ 5.577043] msm_eeprom_platform_probe line 901
[ 5.663699] msm_sensor_power_up:985
[ 5.682492] msm_sensor_power_up exit
[ 5.682678] msm_sensor_power_down:1169
[ 5.694246] [syna]maxx=1080,maxy=2040,vkh=114
[ 5.699456] msm_sensor_power_down exit
[ 5.699933] msm_sensor_power_up:985
Click to expand...
Click to collapse
Need to see the most bottom. Usually if there's nothing wrong/no particular hardware problem it will say No errors detected on the bottom. If there were errors it would state them. Also it tells when it reboots, can you paste it in http://pastebin.com/ please?

nicholaschum said:
Need to see the most bottom. Usually if there's nothing wrong/no particular hardware problem it will say No errors detected on the bottom. If there were errors it would state them. Also it tells when it reboots, can you paste it in http://pastebin.com/ please?
Click to expand...
Click to collapse
thank you man.
here are the last few blocks of the file.
http://pastebin.com/LQ1KxFrn

-greenboy- said:
thank you man.
here are the last few blocks of the file.
http://pastebin.com/LQ1KxFrn
Click to expand...
Click to collapse
Ah, you have the same problem as me too.
Notice:
Code:
[11079.981547] SMP: [COLOR="Red"]failed to stop secondary CPUs[/COLOR]
[11080.982038] [COLOR="Red"]wcnss crash shutdown 0[/COLOR]
[11080.982110] Rebooting in 5 seconds..
[11087.546236] SMP: failed to stop secondary CPUs
[11087.546402] [COLOR="Red"]Going down for restart now[/COLOR]
[11087.547112] Calling SCM to disable SPMI PMIC arbiter
Always look at the last few lines of code from your last_kmsg to debug your issues.
It is due to the kernel/ROM combination you have. I am on AK and I have seen this on the release of ak045.
Try flashing a new kernel/custom kernel if you're just on stock - or reflash CM11S (if you are on stock)

Yes I am on stock, I flashed another kernel I remember, but battery was crappy so I reflash the stock kernel, I think thats where it screwed up maybe.
what kernel you recommend that I should try before reflash?
Thanks once again.

-greenboy- said:
Yes I am on stock, I flashed another kernel I remember, but battery was crappy so I reflash the stock kernel, I think thats where it screwed up maybe.
what kernel you recommend that I should try before reflash?
Thanks once again.
Click to expand...
Click to collapse
Try flashing the latest Franco kernel for CM11S. AK requires boot.img from your ROM prior to installing so that requires you to reflash CM11S.
Also if you can, wipe cache/dalvik after installing, possibly clearing bad app compiles the next time you boot.

You said AK required for the boot.img.
I am stock on 11S with the latest update and stock kernel.
Do I just need to flash the zip file?

just flash the zip file or along with Boot.img?

-greenboy- said:
You said AK required for the boot.img.
I am stock on 11S with the latest update and stock kernel.
Do I just need to flash the zip file?
Click to expand...
Click to collapse
It is required for the AnyKernel format ak uses in his kernel.
If you go the AK path:
Flash CM11S latest update again (to flash the latest boot.img for AK's AnyKernel)
Flash AK
Flash UKM (If you plan to use Synapse to tweak [RECOMMENDED!])
Install Synapse (If you plan to tweak the kernel)
If you go the Franco path:
Flash latest Franco kernel
Download FKU Updater (Paid/Free, just needed to update the kernel directly on your phone easily)
---------- Post added at 09:40 AM ---------- Previous post was at 09:39 AM ----------
-greenboy- said:
just flash the zip file or along with Boot.img?
Click to expand...
Click to collapse
You can't just flash any boot.img and it would be dangerous to find one/extract one yourself - if you do it wrong. Easiest is to reflash CM11S zip.

nicholaschum said:
If you go the Franco path:
Flash latest Franco kernel
Download FKU Updater (Paid/Free, just needed to update the kernel directly on your phone easily)
---------- Post added at 09:40 AM ---------- Previous post was at 09:39 AM ----------
You can't just flash any boot.img and it would be dangerous to find one/extract one yourself - if you do it wrong. Easiest is to reflash CM11S zip.
Click to expand...
Click to collapse
Franco Free isn't supported on the OPO.

zephiK said:
Franco Free isn't supported on the OPO.
Click to expand...
Click to collapse
I just realized.
it soft brick the phone and then I had to reflash the zip from recovery to get the phone boot it again.
the latest for OPO is r22 compare to FKU free suggest to update to r64

-greenboy- said:
I just realized.
it soft brick the phone and then I had to reflash the zip from recovery to get the phone boot it again.
the latest for OPO is r22 compare to FKU free suggest to update to r64
Click to expand...
Click to collapse
Latest is r22 for OPO. Only supported version is Franco Kernel Updater (paid) for opo.
I don't know where you got r64 from.

zephiK said:
Franco Free isn't supported on the OPO.
Click to expand...
Click to collapse
zephiK said:
Latest is r22 for OPO. Only supported version is Franco Kernel Updater (paid) for opo.
I don't know where you got r64 from.
Click to expand...
Click to collapse
from free version.

-greenboy- said:
from free version.
Click to expand...
Click to collapse
Yeah Franco free is not supported. But it's a cheap app and a lot of people recommend getting to support the developer
Sent from my OnePlus One using Tapatalk VIP

-greenboy- said:
from free version.
Click to expand...
Click to collapse
Not supported. Carefully read before you do things man, if that app actually flashed the kernel. it could have bricked your phone for flashing a kernel not for your phone.
Either buy the app as what nicholaschum said, or stay up-to-date to the Franco thread and update the kernel manually.

changing kernel back to Franco did not help.
Still getting reboots.
Do I need to reflash the stock rom?
can you link me please (I am on mobile)

Did the clean install and clear cache/dalvick, but reboot issue remain.
is there any tar flash tool that I can try to put it back as it came out of the factory?
like Samsung kies for samsung device.

Xfinity Home Touchscreen to Android OS?

Hello everyone, I got my hands on a xfinity home touch screen, if you go on Google Images it should be the first one and I was thinking if there would be any way that I could dual boot it so I could use Android OS. Thanks.

It does run Android, the only issue is Xfinity has it locked down like Fort Knox. I talked to a tech on the phone who spoke english, went to school for computers, and worked in the Philadelphia office.

JiuecBxoByo said:
Hello everyone, I got my hands on a xfinity home touch screen, if you go on Google Images it should be the first one and I was thinking if there would be any way that I could dual boot it so I could use Android OS. Thanks.
Click to expand...
Click to collapse
I myself have one of these gems Also the whole system
Lets see what we can do

TheMadScientist said:
I myself have one of these gems Also the whole system
Lets see what we can do
Click to expand...
Click to collapse
Did you guys end up being able to do anything with them?

Sqedlleshimers said:
Did you guys end up being able to do anything with them?
Click to expand...
Click to collapse
Nah the system was trash so I sent it back finally

I have a TCA300COM TCA300 made by technicolor . I have serial console on it. UBOOT looks for and can find a usb drive with a file called boot.img.usb.prod_signed . I have yet to get uboot to stop or get to cli via uboot.
Spoiler
boot log from putty
U-Boot 2014.04-gdd80f7a (Jul 18 2017 - 16:08:44)
CPU: Freescale i.MX6SOLO rev1.3 at 792 MHz
CPU: Temperature 36 C, calibration data: 0x57b5025f
Reset cause: POR
Board: MX6-SabreSD
I2C: ready
DRAM: 1 GiB
MMC: FSL_SDHC: 0, FSL_SDHC: 1, FSL_SDHC: 2
No panel detected: default to Hannstar-XGA
Display: Hannstar-XGA (1024x768)
In: serial
Out: serial
Err: serial
Found PFUZE100 deviceid=10,revid=21
Checking recovery variable ...
check_and_clean: reg 0, flag_set 0
Usb boot: tamper switch key pressed
boot from USB disk
flash target is MMC:2
BCB Command:
BCB Recovery:
Net: Phy not found
PHY reset timed out
FEC
Normal Boot
run usb start ......
(Re)start USB...
USB0: USB EHCI 1.00
scanning bus 0 for devices... 1 USB Device(s) found
scanning usb for storage devices... 0 Storage Device(s) found
scanning usb for ethernet devices... 0 Ethernet Device(s) found
** Bad device usb 0 **
stopping USB..
Failure boot boot.img.usb.prod_signed in usb disk. normal start.
booti mmc2
kernel @ 10808000 (4930992)
ramdisk @ 11800000 (393549)
kernel cmdline:
use boot.img command line:
console=ttymxc0,115200 init=/init nosmp video=mxcfb0:dev=mipi_dsi,if=RGB24,TRULY-WVGA video=mxcfb1ff video=mxcfb2ff fbmem=10M fb0base=0x17b00000 vmalloc=400M androidboot.console=ttymxc0 androidboot.hardware=freescale
No gpc device node -9, force to ldo-enable.
Starting kernel ...
Uncompressing Linux... done, booting the kernel.
Initializing cgroup subsys cpu
Linux version 3.0.35-g82dfb36959 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Jun 20 12:53:06 CDT 2018
CPU: ARMv7 Processor [412fc09a] revision 10 (ARMv7), cr=10c53c7d
CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache
Machine: Freescale i.MX 6Quad/DualLite/Solo Sabre-SD Board
Memory policy: ECC disabled, Data cache writealloc
CPU identified as i.MX6DL/SOLO, unknown revision
PERCPU: Embedded 7 pages/cpu @c1352000 s6528 r8192 d13952 u32768
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 208128
Kernel command line: printk.time=Y console=ttymxc0,115200 init=/init nosmp video=mxcfb0:dev=mipi_dsi,if=RGB24,TRULY-WVGA video=mxcfb1ff video=mxcfb2ff fbmem=10M fb0base=0x17b00000 vmalloc=400M androidboot.console=ttymxc0 androidboot.hardware=freescale
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 123MB 634MB 64MB = 821MB total
[ 0.000000] Memory: 820104k/820104k available, 228472k reserved, 441344K highmem
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
[ 0.000000] DMA : 0xfbe00000 - 0xffe00000 ( 64 MB)
[ 0.000000] vmalloc : 0xd9800000 - 0xf2000000 ( 392 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd9000000 ( 400 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .init : 0xc0008000 - 0xc0142000 (1256 kB)
[ 0.000000] .text : 0xc0142000 - 0xc0a11f6c (9024 kB)
[ 0.000000] .data : 0xc0a12000 - 0xc0abe8f8 ( 691 kB)
[ 0.000000] .bss : 0xc0abe91c - 0xc0b48150 ( 551 kB)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] NR_IRQS:624
[ 0.000000] MXC GPIO hardware
[ 0.000000] sched_clock: 32 bits at 3000kHz, resolution 333ns, wraps every 1431655ms
[ 0.000000] Set periph_clk's parent to pll2_pfd_400M!
[ 0.000000] arm_max_freq=1GHz
[ 0.000000] =============cpu is imx6dl================
[ 0.000000] =============cpu is 1g================
[ 0.000000] MXC_Early serial console at MMIO 0x2020000 (options '115200')
[ 0.000000] bootconsole [ttymxc0] enabled
[ 0.224492] Calibrating delay loop... 1581.05 BogoMIPS (lpj=7905280)
[ 0.317258] pid_max: default: 32768 minimum: 301
[ 0.322025] Security Framework initialized
[ 0.326183] SELinux: Initializing.
[ 0.329833] Mount-cache hash table entries: 512
[ 0.335151] Initializing cgroup subsys debug
[ 0.339480] Initializing cgroup subsys cpuacct
[ 0.343991] Initializing cgroup subsys freezer
[ 0.348484] CPU: Testing write buffer coherency: ok
[ 0.353612] hw perfevents: enabled with ARMv7 Cortex-A9 PMU driver, 7 counters available
[ 0.433246] Brought up 1 CPUs
[ 0.436232] SMP: Total of 1 processors activated (1581.05 BogoMIPS).
[ 0.468604] print_constraints: dummy:
[ 0.472617] NET: Registered protocol family 16
[ 0.483184] print_constraints: vddpu: 725 <--> 1300 mV at 700 mV fast normal
[ 0.490892] print_constraints: vddcore: 725 <--> 1300 mV at 1150 mV fast normal
[ 0.498812] print_constraints: vddsoc: 725 <--> 1300 mV at 1175 mV fast normal
[ 0.506819] print_constraints: vdd2p5: 2000 <--> 2775 mV at 2400 mV fast normal
[ 0.514700] print_constraints: vdd1p1: 800 <--> 1400 mV at 1100 mV fast normal
[ 0.522518] print_constraints: vdd3p0: 2625 <--> 3400 mV at 3000 mV fast normal
[ 0.532159] Reg address:0xf41b4018 Original Value=0x1600
[ 0.539213] ram_console: got buffer at 3ff00000, size 100000
[ 0.545223] ram_console: uncorrectable error in header
[ 0.550383] ram_console: no valid data in buffer (sig = 0xffffffff)
[ 0.563562] console [ram-1] enabled
[ 0.892227] add wake up source irq 105
[ 5.702310] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers.
[ 5.709210] hw-breakpoint: 1 breakpoint(s) reserved for watchpoint single-step.
[ 5.716786] hw-breakpoint: maximum watchpoint size is 4 bytes.
[ 5.722742] L310 cache controller enabled
[ 5.726985] l2x0: 16 ways, CACHE_ID 0x410000c8, AUX_CTRL 0x32050000, Cache size: 524288 B
[ 5.782687] bio: create slab <bio-0> at 0
[ 5.791692] mxs-dma mxs-dma-apbh: initialized
[ 5.796617] print_constraints: vmmc: 3300 mV
[ 5.803779] SCSI subsystem initialized
[ 5.807880] spi_imx imx6q-ecspi.0: bitbang start failed with -22
[ 5.814052] spi_imx: probe of imx6q-ecspi.0 failed with error -22
[ 5.821355] usbcore: registered new interface driver usbfs
[ 5.827318] usbcore: registered new interface driver hub
[ 5.832947] usbcore: registered new device driver usb
[ 5.838188] Freescale USB OTG Driver loaded, $Revision: 1.55 $
[ 5.847330] mc_pfuze 1-0008: ID: 0,Full lay: 2 ,Metal lay: 1
[ 5.853659] mc_pfuze 1-0008: FAB: 0 ,FIN: 0
[ 5.869858] print_constraints: PFUZE100_SW1A: 300 <--> 1875 mV at 1300 mV
[ 5.877637] print_constraints: PFUZE100_SW1B: 300 <--> 1875 mV at 300 mV
[ 5.886231] print_constraints: PFUZE100_SW1C: 300 <--> 1875 mV at 1300 mV
[ 5.894078] print_constraints: PFUZE100_SW2: 800 <--> 3950 mV at 3300 mV
[ 5.901719] print_constraints: PFUZE100_SW3A: 400 <--> 1975 mV at 1500 mV
[ 5.909565] print_constraints: PFUZE100_SW3B: 400 <--> 1975 mV at 1500 mV
[ 5.917316] print_constraints: PFUZE100_SW4: 800 <--> 3950 mV at 3150 mV
[ 5.925059] print_constraints: PFUZE100_SWBST: 5000 <--> 5150 mV at 5000 mV
[ 5.933036] print_constraints: PFUZE100_VSNVS: 1200 <--> 3000 mV at 1800 mV
[ 5.941353] print_constraints: PFUZE100_VREFDDR: at 750 mV
[ 5.947849] print_constraints: PFUZE100_VGEN1: 800 <--> 1550 mV at 1500 mV
[ 5.955695] print_constraints: PFUZE100_VGEN2: 800 <--> 1550 mV at 1500 mV
[ 5.963582] print_constraints: PFUZE100_VGEN3: 1800 <--> 3300 mV at 2800 mV
[ 5.972484] print_constraints: PFUZE100_VGEN4: 1800 <--> 3300 mV at 1800 mV
[ 5.981320] print_constraints: PFUZE100_VGEN5: 1800 <--> 3300 mV at 3000 mV
[ 5.989293] print_constraints: PFUZE100_VGEN6: 1800 <--> 3300 mV at 3300 mV
[ 6.000047] mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 driver probed
[ 6.006675] mxc_mipi_csi2 mxc_mipi_csi2: i.MX MIPI CSI2 dphy version is 0x3130302a
[ 6.014575] MIPI CSI2 driver module loaded
[ 6.019173] Advanced Linux Sound Architecture Driver Version 1.0.24.
[ 6.026810] Bluetooth: Core ver 2.16
[ 6.030709] NET: Registered protocol family 31
[ 6.035248] Bluetooth: HCI device and connection manager initialized
[ 6.041878] Bluetooth: HCI socket layer initialized
[ 6.046852] Bluetooth: L2CAP socket layer initialized
[ 6.052107] Bluetooth: SCO socket layer initialized
[ 6.058817] i2c-core: driver [max17135] using legacy suspend method
[ 6.065325] i2c-core: driver [max17135] using legacy resume method
[ 6.071625] Switching to clocksource mxc_timer1
[ 6.076392] cfg80211: Calling CRDA to update world regulatory domain
[ 6.096628] NET: Registered protocol family 2
[ 6.101308] IP route cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 6.108964] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[ 6.117499] TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
[ 6.125449] TCP: Hash tables configured (established 65536 bind 65536)
[ 6.132073] TCP reno registered
[ 6.135346] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 6.141358] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 6.148080] NET: Registered protocol family 1
[ 6.152880] RPC: Registered named UNIX socket transport module.
[ 6.158951] RPC: Registered udp transport module.
[ 6.163828] RPC: Registered tcp transport module.
[ 6.168624] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.175439] Unpacking initramfs...
[ 6.205431] Freeing initrd memory: 384K
[ 6.210311] PMU: registered new PMU device of type 0
[ 6.215683] Static Power Management for Freescale i.MX6
[ 6.221003] wait mode is enabled for i.MX6
[ 6.225559] cpaddr = d9820000 suspend_iram_base=d98b8000
[ 6.231059] PM driver module loaded
[ 6.234997] IMX usb wakeup probe
[ 6.238497] the wakeup pdata is 0xd63ff960
[ 6.243180] add wake up source irq 75
[ 6.253876] IMX usb wakeup probe
[ 6.257366] the wakeup pdata is 0xd63ff6a0
[ 6.262104] mxc_bt_rfkill driver success loaded
[ 6.266777] rfkill: BT RF going to : on
[ 6.270773] bluetooth power on mx6_bt_power_change!!!
[ 6.276380] cpu regulator mode:ldo_bypass
[ 6.280568] =============cpu is imx6dl================
[ 6.292981] =============cpu is 1g================
[ 6.304795] _regulator_get: get() with no identifier
[ 6.309924] mx6_cpu_regulator_init: failed to get pu regulator
[ 6.334954] i.MXC CPU frequency driver
[ 6.338842] =============cpu is imx6dl================
[ 6.352948] =============cpu is 1g================
[ 6.373045] audit: initializing netlink socket (disabled)
[ 6.378555] type=2000 audit(6.040:1): initialized
[ 6.413153] highmem bounce pool size: 64 pages
[ 6.417936] ashmem: initialized
[ 6.433107] NTFS driver 2.1.30 [Flags: R/O].
[ 6.437569] JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[ 6.443867] fuse init (API version 7.16)
[ 6.453081] msgmni has been set to 740
[ 6.456986] SELinux: Registering netfilter hooks
[ 6.503009] NET: Registered protocol family 38
[ 6.507829] cryptodev: driver loaded.
[ 6.511590] io scheduler noop registered
[ 6.515651] io scheduler deadline registered
[ 6.520099] io scheduler cfq registered (default)
[ 6.542991] init_notifier
[ 6.545816] sdhci: Secure Digital Host Controller Interface driver
[ 6.552137] sdhci: Copyright(c) Pierre Ossman
[ 6.573114] mmc_add_host: sdio_host add slot is 0.
[ 6.578045] mmc0: SDHCI controller on (null) [sdhci-esdhc-imx.3] using ADMA
[ 6.597045] sdhci sdhci-esdhc-imx.1: no card-detect pin available!
[ 6.612965] mmc0: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 6.621856] mmc_add_host: sdio_host add slot is 1.
[ 6.629207] select_sdio_host: sdio_host assigned.(d6268000)
[ 6.652960] mmc1: SDHCI controller on (null) [sdhci-esdhc-imx.1] using ADMA
[ 6.660110] sdhci sdhci-esdhc-imx.2: no write-protect pin available!
[ 6.702961] mmc_add_host: sdio_host add slot is 2.
[ 6.707890] mmc2: SDHCI controller on (null) [sdhci-esdhc-imx.2] using ADMA
[ 6.721414] imx-sdma imx-sdma: loaded firmware 1.1
[ 6.741168] imx-sdma imx-sdma: initialized
[ 6.784726] mmc0: new high speed MMC card at address 0001
[ 6.791406] mmcblk0: mmc0:0001 4FPD3R 3.64 GiB
[ 6.796912] mmcblk0boot0: mmc0:0001 4FPD3R partition 1 4.00 MiB
[ 6.804068] mmcblk0boot1: mmc0:0001 4FPD3R partition 2 4.00 MiB
[ 6.814534] mmcblk0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 p10 >
[ 6.827834] mmcblk0boot1: unknown partition table
[ 6.835782] mmcblk0boot0: unknown partition table
[ 6.872990] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 6.963279] mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 7.053164] mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 7.093104] Serial: IMX driver
[ 7.096404] imx-uart.3: ttymxc3 at MMIO 0x21f0000 (irq = 61) is a IMX
[ 7.103587] imx-uart.2: ttymxc2 at MMIO 0x21ec000 (irq = 60) is a IMX
[ 7.112726] imx-uart.1: ttymxc1 at MMIO 0x21e8000 (irq = 59) is a IMX
[ 7.121816] imx-uart.0: ttymxc0 at MMIO 0x2020000 (irq = 58) is a IMX
[ 7.130533] console [ttymxc0] enabled, bootconsole disabled
[ 7.130533] console [ttymxc0] enabled, bootconsole disabled
[ 7.159309] loop: module loaded
[ 7.164577] GPMI NAND driver registered. (IMX)
[ 7.170321] vcan: Virtual CAN interface driver
[ 7.179253] CAN device driver interface
[ 7.183254] flexcan netdevice driver
[ 7.187122] FEC Ethernet Driver
[ 7.192990] mmc1: mmc_rescan_try_freq: trying to init card at 100000 Hz
[ 7.266027] In Event 1: Event Number is 1
[ 7.439856] Set FEC phy reset high!
[ 7.563321] Sleep 120ms done!
[ 7.568777] fec_enet_mii_bus: probed
[ 7.573132] mxc_mipi_dsi mxc_mipi_dsi: i.MX MIPI DSI driver probed
[ 7.579637] PPP generic driver version 2.4.2
[ 7.584214] MIPI DSI driver module loaded
[ 7.588295] In Event 2: Event Number is 1
[ 7.592487] mxc_sdc_fb mxc_sdc_fb.0: register mxc display driver mipi_dsi
[ 7.599855] PPP Deflate Compression module registered
[ 7.605110] PPP BSD Compression module registered
[ 7.609882] tun: Universal TUN/TAP device driver, 1.6
[ 7.615142] tun: (C) 1999-2004 Max Krasnyansky <[email protected]>
[ 7.622149] usbcore: registered new interface driver asix
[ 7.627871] usbcore: registered new interface driver cdc_ether
[ 7.643106] usbcore: registered new interface driver net1080
[ 7.653025] usbcore: registered new interface driver cdc_subset
[ 7.666076] ## MIPI DSI get video mode##
[ 7.670149] add wake up source irq 100
[ 7.674003] usbcore: registered new interface driver zaurus
[ 7.679653] cdc_ncm: 04-Aug-2011
[ 7.683655] usbcore: registered new interface driver cdc_ncm
[ 7.689400] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 7.796051] ## LCD RESET ##
[ 7.852961] OTP_FIELD_RETURN: 00000001
[ 7.856775] New LCM, updating init commands...
[ 7.861339] ## MIPI DSI LCD setup ##
[ 8.420167] 2222 foxconn ting [email protected]@@
[ 8.426607] got pwm for vcom
[ 8.827630] fsl-ehci fsl-ehci.0: Freescale On-Chip EHCI Host Controller
[ 8.834389] fsl-ehci fsl-ehci.0: new USB bus registered, assigned bus number 1
[ 8.862990] fsl-ehci fsl-ehci.0: irq 75, io base 0x02184000
[ 8.882968] fsl-ehci fsl-ehci.0: USB 2.0 started, EHCI 1.00
[ 8.889551] hub 1-0:1.0: USB hub found
[ 8.903004] hub 1-0:1.0: 1 port detected
[ 8.907153] mxc_sdc_fb mxc_sdc_fb.1: Can't get fb option for mxcfb1!
[ 8.914229] add wake up source irq 72
[ 8.918006] fsl-ehci fsl-ehci.1: Freescale On-Chip EHCI Host Controller
[ 8.925034] fsl-ehci fsl-ehci.1: new USB bus registered, assigned bus number 2
[ 8.952975] fsl-ehci fsl-ehci.1: irq 72, io base 0x02184200
[ 8.962960] mmc2: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 8.972961] fsl-ehci fsl-ehci.1: USB 2.0 started, EHCI 1.00
[ 8.987506] hub 2-0:1.0: USB hub found
[ 8.991362] hub 2-0:1.0: 1 port detected
[ 9.003086] usbcore: registered new interface driver cdc_acm
[ 9.010868] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 9.021056] Initializing USB Mass Storage driver...
[ 9.028225] usbcore: registered new interface driver usb-storage
[ 9.036437] USB Mass Storage support registered.
[ 9.043480] usbcore: registered new interface driver usbserial
[ 9.051494] usbserial: USB Serial Driver core
[ 9.058088] USB Serial support registered for cp210x
[ 9.068423] usbcore: registered new interface driver cp210x
[ 9.077236] cp210x: v0.09:Silicon Labs CP210x RS232 serial adaptor driver
[ 9.084284] USB Serial support registered for GSM modem (1-port)
[ 9.090585] usbcore: registered new interface driver option
[ 9.100365] option: v0.7.2:USB Driver for GSM modems
[ 9.105540] USB Serial support registered for Qualcomm USB modem
[ 9.111850] usbcore: registered new interface driver qcserial
[ 9.117696] mmc2: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 9.124471] ARC USBOTG Device Controller driver (1 August 2005)
[ 9.135760] android_usb gadget: Mass Storage Function, version: 2009/09/11
[ 9.142825] android_usb gadget: Number of LUNs=1
[ 9.149627] lun0: LUN: removable file: (no medium)
[ 9.165534] Gadget Android: controller 'fsl-usb2-udc' not recognized
[ 9.171967] android_usb gadget: android_usb ready
[ 9.177872] Suspend udc for OTG auto detect
[ 9.184194] fsl-usb2-udc: bind to driver android_usb
[ 9.193974] current dev change status , usb: 1 eth: -1 bat:-1
[ 9.202026] mousedev: PS/2 mouse device common for all mice
[ 9.209818] hub 2-0:1.0: port 1, status 0101, change 0000, 12 Mb/s
[ 9.220728] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[ 9.235312] DebugPoint:796(drivers/input/touchscreen/ft5x06_ts.c), ==ft5x0x_ts_init==
[ 9.235319]
[ 9.247972] [FTS] Probe ... driver version is 3.0.
[ 9.252990] SN:TCB733303876130X
[ 9.256202] TS SN:TCB733303876130 num = 16
[ 9.260943] TS ID:0x83
[ 9.267434] This is TOPTPUCH touch screen!!!
[ 9.272272] app_i ver = 19
[ 9.275445] input: FT5X06 as /devices/virtual/input/input1
[ 9.283007] mmc2: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 9.342976] usb 2-1: new full speed USB device number 2 using fsl-ehci
[ 9.373072] mmc2: mmc_rescan_try_freq: trying to init card at 100000 Hz
[ 9.437044] DebugPoint:720(drivers/input/touchscreen/ft5x06_ts.c), [FTS] Firmware version = 0x19
[ 9.437051]
[ 9.451086] DebugPoint:723(drivers/input/touchscreen/ft5x06_ts.c), [FTS] report rate is 0Hz.
[ 9.451092]
[ 9.461712] DebugPoint:726(drivers/input/touchscreen/ft5x06_ts.c), [FTS] touch threshold is 140.
[ 9.461718]
[ 9.472185] CheckPoint:1092(drivers/input/touchscreen/ft5x06_ex_fun.c), err = 0
[ 9.479665] [FTS] Probe OK
[ 9.482685] DebugPoint:798(drivers/input/touchscreen/ft5x06_ts.c), ret=0
[ 9.482690]
[ 9.491141] TP statistic init!
[ 9.491145]
[ 9.496449] input: pwm-beeper as /devices/platform/pwm-beeper.0/input/input2
[ 9.504868] i2c-core: driver [isl29023] using legacy suspend method
[ 9.511339] i2c-core: driver [isl29023] using legacy resume method
[ 9.519229] using rtc device, snvs_rtc, for alarms
[ 9.524159] snvs_rtc snvs_rtc.0: rtc core: registered snvs_rtc as rtc0
[ 9.531204] i2c /dev entries driver
[ 9.536267] Linux video capture interface: v2.00
[ 9.561699] option 2-1:1.0: GSM modem (1-port) converter detected
[ 9.569409] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 9.577359] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video16
[ 9.585262] option 2-1:1.1: GSM modem (1-port) converter detected
[ 9.592395] mxc_v4l2_output mxc_v4l2_output.0: V4L2 device registered as video17
[ 9.600066] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 9.607744] usbcore: registered new interface driver uvcvideo
[ 9.613745] option 2-1:1.2: GSM modem (1-port) converter detected
[ 9.620190] USB Video Class driver (v1.1.0)
[ 9.625037] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 9.631894] Huawei MU509 3G module: ON
[ 9.636942] add wake up source irq 98
[ 9.675834] i2c-core: driver [bq27531-battery] using legacy suspend method
[ 9.682838] i2c-core: driver [bq27531-battery] using legacy resume method
[ 9.689875] i2c-core: driver [mag3110] using legacy suspend method
[ 9.696226] i2c-core: driver [mag3110] using legacy resume method
[ 9.703104] imx2-wdt imx2-wdt.0: IMX2+ Watchdog Timer enabled. timeout=60s (nowayout=1)
[ 9.711486] device-mapper: uevent: version 1.0.3
[ 9.716629] device-mapper: ioctl: 4.20.0-ioctl (2011-02-02) initialised: [email protected]
[ 9.725242] Bluetooth: Virtual HCI driver ver 1.3
[ 9.730366] Bluetooth: HCI UART driver ver 2.2
[ 9.735084] Bluetooth: HCI H4 protocol initialized
[ 9.740275] mxc_vdoa mxc_vdoa: i.MX Video Data Order Adapter(VDOA) driver probed
[ 9.748684] VPU initialized
[ 9.752782] mxc_asrc registered
[ 9.756333] Galcore version 4.6.9.9754
[ 9.776511] Thermal calibration data is 0x57b5025f
[ 9.781380] Thermal sensor with ratio = 181
[ 9.785771] setting trigger mode 3 for irq 81 failed (gic_set_type+0x0/0xe4)
[ 9.812973] Anatop Thermal registered as thermal_zone0
[ 9.818413] =============cpu is imx6dl================
[ 9.823664] =============cpu is 1g================
[ 9.828582] anatop_thermal_probe: default cooling device is cpufreq!
[ 9.835542] Registered led device: panic_led
[ 9.840150] leds_pwm leds_pwm: unable to request PWM 2
[ 9.845422] leds_pwm: probe of leds_pwm failed with error -16
[ 9.853127] logger: log_main kmalloc'ed 2097152 bytes at 0xD7A00000
[ 9.859814] logger: created 2048K log 'log_main'
[ 9.864647] logger: log_events kmalloc'ed 262144 bytes at 0xD6700000
[ 9.871355] logger: created 256K log 'log_events'
[ 9.876266] logger: log_radio kmalloc'ed 262144 bytes at 0xD6740000
[ 9.882869] logger: created 256K log 'log_radio'
[ 9.887680] logger: log_system kmalloc'ed 262144 bytes at 0xD6780000
[ 9.894392] logger: created 256K log 'log_system'
[ 9.900212] usbcore: registered new interface driver snd-usb-audio
[ 9.907296] mxc_hdmi_soc mxc_hdmi_soc.0: MXC HDMI Audio
[ 9.913034] Cirrus Logic CS42888 ALSA SoC Codec Driver
[ 9.918409] i2c-core: driver [cs42888] using legacy suspend method
[ 9.924759] i2c-core: driver [cs42888] using legacy resume method
[ 9.932340] imx-hdmi-soc-dai imx-hdmi-soc-dai.0: Failed: Load HDMI-video first.
[ 9.941551] imx_3stack asoc driver
[ 9.945983] Initialize HDMI-audio failed. Load HDMI-video first!
[ 9.952115] imx_asoc_pcm51xx_init in...
[ 10.096923] asoc: tlv320aic3110-MM_EXT <-> imx-ssi.1 mapping ok
[ 10.104182] ALSA device list:
[ 10.107277] #0: pcm51xx-audio
[ 10.111032] oprofile: using arm/armv7-ca9
[ 10.115265] u32 classifier
[ 10.118093] Actions configured
[ 10.121560] Netfilter messages via NETLINK v0.30.
[ 10.126442] nf_conntrack version 0.5.0 (12820 buckets, 51280 max)
[ 10.132886] ctnetlink v0.93: registering with nfnetlink.
[ 10.138499] NF_TPROXY: Transparent proxy support initialized, version 4.1.0
[ 10.145611] NF_TPROXY: Copyright (c) 2006-2007 BalaBit IT Ltd.
[ 10.152082] xt_time: kernel timezone is -0000
[ 10.156753] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 10.162280] arp_tables: (C) 2002 David S. Miller
[ 10.167086] TCP cubic registered
[ 10.170379] Initializing XFRM netlink socket
[ 10.174873] NET: Registered protocol family 10
[ 10.180159] Mobile IPv6
[ 10.182702] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 10.188318] IPv6 over IPv4 tunneling driver
[ 10.193423] NET: Registered protocol family 17
[ 10.197959] NET: Registered protocol family 15
[ 10.202523] can: controller area network core (rev 20090105 abi 8)
[ 10.208906] NET: Registered protocol family 29
[ 10.213461] can: raw protocol (rev 20090105)
[ 10.217856] can: broadcast manager protocol (rev 20090105 t)
[ 10.223698] Bluetooth: RFCOMM TTY layer initialized
[ 10.228709] Bluetooth: RFCOMM socket layer initialized
[ 10.234123] Bluetooth: RFCOMM ver 1.11
[ 10.237997] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 10.243390] Bluetooth: BNEP filters: protocol multicast
[ 10.248682] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 10.254854] lib80211: common routines for IEEE802.11 drivers
[ 10.260643] lib80211_crypt: registered algorithm 'NULL'
[ 10.265983] lib80211_crypt: registered algorithm 'WEP'
[ 10.271186] lib80211_crypt: registered algorithm 'CCMP'
[ 10.276547] lib80211_crypt: registered algorithm 'TKIP'
[ 10.281837] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4
[ 10.289900] =============cpu is imx6dl================
[ 10.295127] =============cpu is 1g================
[ 10.300292] Bus freq driver module loaded
[ 10.304426] Bus freq driver Enabled
[ 10.310718] mxc_dvfs_core_probe
[ 10.314059] =============cpu is imx6dl================
[ 10.319267] =============cpu is 1g================
[ 10.324424] DVFS driver module loaded
[ 10.330350] regulator_init_complete: PFUZE100_VGEN3: incomplete constraints, leaving on
[ 10.339194] regulator_init_complete: PFUZE100_VGEN2: incomplete constraints, leaving on
[ 10.347820] regulator_init_complete: PFUZE100_VGEN1: incomplete constraints, leaving on
[ 10.356048] snvs_rtc snvs_rtc.0: setting system clock to 1970-01-01 00:00:00 UTC (0)
[ 10.364723] Freeing init memory: 1256K
[ 14.842164] type=1400 audit(4.960:4): avc: denied { entrypoint } for pid=2332 comm="init" path="/sbin/healthd" dev=rootfs ino=1463 scontext=u:r:healthd:s0 tcontext=ubject_r:rootfs:s0 tclass=file
[ 14.870310] init: Created socket '/dev/socket/mdns' with mode '660', user '0', group '1000'
[ 14.895906] init: Created socket '/dev/socket/zygote' with mode '660', user '0', group '1000'
[ 14.912407] init: starting 'installd'
[ 14.921578] init: Created socket '/dev/socket/dnsproxyd' with mode '660', user '0', group '3003'
[ 14.932319] init: computing context for service '/system/etc/install-recovery.sh'
[ 14.948382] init: Created socket '/dev/socket/installd' with mode '600', user '1000', group '1000'
[ 14.959967] healthd: wakealarm_init: timerfd_create failed
[ 14.966391] init: starting 'flash_recovery'
[ 14.971320] init: Created socket '/dev/socket/netd' with mode '660', user '0', group '1000'
[ 14.981627] init: computing context for service '/system/bin/keystore'
[ 15.008528] init: starting 'keystore'
[ 15.012923] init: computing context for service '/system/bin/rild'
[ 15.023050] init: starting 'ril-daemon'
[ 15.031899] init: cannot find '/vendor/sbin/procMgr', disabling 'procMgr'
[ 15.053993] init: Created socket '/dev/socket/rild-ppp' with mode '660', user '1001', group '1000'
[ 15.065309] init: command 'class_start' r=0
[ 15.069878] init: processing action 0x54f90 (boot)
[ 15.075217] init: Created socket '/dev/socket/rild-debug' with mode '660', user '1001', group '1000'
[ 15.095024] init: command 'symlink' r=0
[ 15.105213] init: command 'setprop' r=0
[ 15.109763] init: command 'setprop' r=0
[ 15.119756] init: Created socket '/dev/socket/rild' with mode '660', user '0', group '1001'
[ 15.139880] init: command 'symlink' r=0
[ 15.149161] init: command 'write' r=-16
[ 15.157857] init: command 'write' r=-2
[ 15.161713] init: command 'write' r=-2
[ 15.192356] init: command 'write' r=0
[ 15.197337] init: command 'write' r=0
[ 15.205577] init: command 'setprop' r=0
[ 15.219724] init: command 'setprop' r=0
[ 15.234057] init: command 'setprop' r=0
[ 15.242869] warning: `rild' uses 32-bit capabilities (legacy support in use)
[ 15.256330] init: command 'setprop' r=0
[ 15.264581] init: command 'setprop' r=0
[ 15.268939] init: command 'setprop' r=0
[ 15.273450] init: command 'setprop' r=0
[ 15.279389] init: command 'setprop' r=0
[ 15.284661] init: command 'setprop' r=0
[ 15.296419] init: command 'setprop' r=0
[ 15.329897] init: command 'setprop' r=0
[ 15.338190] init: command 'setprop' r=0
[ 15.383603] init: command 'setprop' r=0
[ 15.387620] init: command 'setprop' r=0
[ 15.445861] init: command 'setprop' r=0
[ 15.449808] init: command 'setprop' r=0
[ 15.487012] init: command 'stop' r=0
[ 15.490757] init: command 'setprop' r=0
[ 15.501133] init: command 'setprop' r=0
[ 15.505145] init: command 'setprop' r=0
[ 15.513265] init: command 'setprop' r=0
[ 15.517718] init: command 'setprop' r=0
[ 15.526828] init: command 'chown' r=0
[ 15.531105] init: command 'chmod' r=0
[ 15.553713] init: command 'chown' r=0
[ 15.563342] init: command 'chmod' r=0
[ 15.581597] init: command 'chown' r=0
[ 15.634507] init: command 'chmod' r=0
[ 15.638301] init: command 'chown' r=0
[ 15.642129] init: command 'chmod' r=0
[ 15.700694] init: command 'chown' r=0
[ 15.733360] init: command 'chown' r=0
[ 15.737205] init: command 'chmod' r=0
[ 15.784021] init: command 'chown' r=-2
[ 15.787897] init: command 'chmod' r=-2
[ 15.858698] init: command 'chown' r=-2
[ 15.862571] init: command 'chmod' r=-2
localhost login: [ 15.903305] init: command 'chown' r=-2
[ 15.910399] init: command 'chmod' r=-2
[ 15.966530] init: command 'setprop' r=0
[ 15.970457] init: command 'setprop' r=0
[ 16.047748] init: command 'setprop' r=0
[ 16.047906] init: command 'chown' r=0
[ 16.047983] init: command 'chmod' r=0
[ 16.048029] init: command 'chmod' r=0
[ 16.048070] init: command 'setprop' r=0
[ 16.048102] init: command 'setprop' r=0
[ 16.048134] init: command 'setprop' r=0
[ 16.048166] init: command 'setprop' r=0
[ 16.048265] init: command 'mount' r=0
[ 16.048294] init: processing action 0x568e0 (boot)
[ 16.048310] init: using deprecated syntax for specifying property 'ro.serialno', use ${name} instead
[ 16.048325] init: property 'ro.serialno' doesn't exist while expanding '$ro.serialno'
[ 16.048339] init: cannot expand '$ro.serialno' while writing to '/sys/class/android_usb/android0/iSerial'
[ 16.048352] init: command 'write' r=-22
[ 16.048365] init: using deprecated syntax for specifying property 'ro.product.manufacturer', use ${name} instead
[ 16.048463] init: command 'write' r=0
[ 16.048480] init: using deprecated syntax for specifying property 'ro.product.model', use ${name} instead
[ 16.048543] init: command 'write' r=0
[ 16.048559] init: processing action 0x576a0 (boot)
[ 16.048645] init: command 'chmod' r=0
[ 16.094401] init: command 'chown' r=0
[ 16.094453] init: command 'chown' r=0
[ 16.094500] init: command 'chown' r=0
[ 16.094547] init: command 'chown' r=0
[ 16.094589] init: command 'chown' r=0
[ 16.094639] init: command 'chown' r=0
[ 16.094683] init: command 'chown' r=0
[ 16.094725] init: command 'chown' r=0
[ 16.094770] init: command 'chown' r=0
[ 16.094812] init: command 'chown' r=0
[ 16.094853] init: command 'chmod' r=0
[ 16.095040] init: command 'chmod' r=0
[ 16.095084] init: command 'chmod' r=0
[ 16.095125] init: command 'chmod' r=0
[ 16.095164] init: command 'chmod' r=0
[ 16.095204] init: command 'chmod' r=0
[ 16.095242] init: command 'chmod' r=0
[ 16.095280] init: command 'chmod' r=0
[ 16.095321] init: command 'chmod' r=0
[ 16.095359] init: command 'chmod' r=0
[ 16.095430] init: command 'chown' r=0
[ 16.095483] init: command 'chmod' r=0
[ 16.095510] init: processing action 0x57ca8 (queue_property_triggers)
[ 16.095585] init: command 'queue_property_triggers' r=0
[ 16.095604] init: processing action 0x4ef08 (nonencrypted)
[ 16.095724] init: computing context for service '/system/bin/sh'
[ 16.095924] init: starting 'wifi_mac'
[ 16.096510] init: computing context for service '/system/bin/sdcard'
[ 16.096690] init: starting 'sdcard'
[ 16.097221] init: computing context for service '/system/bin/magd'
[ 16.097373] init: starting 'magd'
[ 16.097874] init: computing context for service '/system/bin/start_tch.sh'
[ 16.098026] init: starting 'start_tch'
[ 16.098505] init: computing context for service '/system/bin/ingsvcd'
[ 16.098658] init: starting 'ing'
[ 16.098950] init: command 'class_start' r=0
[ 16.099018] init: processing action 0x4f1c8 (property:sys.powerctl=*)
[ 16.099036] init: property 'sys.powerctl' doesn't exist while expanding '${sys.powerctl}'
[ 16.099047] init: powerctl: cannot expand '${sys.powerctl}'
[ 16.099059] init: command 'powerctl' r=-22
[ 16.099097] init: processing action 0x4f218 (property:sys.sysctl.extra_free_kbytes=*)
[ 16.099114] init: property 'sys.sysctl.extra_free_kbytes' doesn't exist while expanding '${sys.sysctl.extra_free_kbytes}'
[ 16.099128] init: cannot expand '${sys.sysctl.extra_free_kbytes}' while writing to '/proc/sys/vm/extra_free_kbytes'
[ 16.099143] init: command 'write' r=-22
[ 16.099157] init: processing action 0x53230 (propertyersist.sys.usb.config=*)
[ 16.099226] init: command 'setprop' r=0
[ 16.099244] init: processing action 0x56bf0 (property:sys.usb.config=mtp,adb)
[ 16.099352] android_usb: already disabled
[ 16.099373] init: command 'write' r=0
[ 16.099442] init: command 'write' r=0
[ 16.099503] init: command 'write' r=0
[ 16.099568] init: command 'write' r=0
[ 16.099621] mtp_bind_config
[ 16.099659] adb_bind_config
[ 16.099695] init: command 'write' r=0
[ 16.099767] init: cannot find '/vendor/sbin/adbd', disabling 'adbd'
[ 16.099780] init: command 'start' r=0
[ 16.099833] init: command 'setprop' r=0
[ 16.173911] init: Created socket '/dev/socket/athrsupl59991' with mode '666', user '1000', group '1000'
[ 16.174235] init: Created socket '/dev/socket/athrshmsocket' with mode '666', user '1000', group '1000'
[ 16.174525] init: Created socket '/dev/socket/athrkv9988' with mode '666', user '1000', group '1000'
[ 16.183855] init: waitpid returned pid 2395, status = 00007f00
[ 16.183874] init: process 'wifi_mac', pid 2395 exited
[ 16.223204] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 16.374369] init: waitpid returned pid 2397, status = 0000ff00
[ 16.374389] init: process 'magd', pid 2397 exited
[ 17.052367] ERROR: v4l2 capture: slave not found!
[ 17.052401] ERROR: v4l2 capture: slave not found!
[ 17.060242] ERROR: v4l2 capture: slave not found!
[ 17.060268] ERROR: v4l2 capture: slave not found!
[ 17.060509] ERROR: v4l2 capture: slave not found!
[ 17.060530] ERROR: v4l2 capture: slave not found!
[ 17.073559] ERROR: v4l2 capture: slave not found!
[ 17.073586] ERROR: v4l2 capture: slave not found!
[ 17.520848] init: computing context for service '/system/bin/bootanimation'
[ 17.576745] init: starting 'bootanim'
[ 17.725235] Set zigbee_pa5 to input
[ 17.773804] Set zigbee_reset to low
[ 17.780552] Set zigbee_reset to High
[ 18.394353] init: waitpid returned pid 2346, status = 00000000
[ 18.400271] init: process 'flash_recovery', pid 2346 exited
[ 19.253382] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 21.964628] pre_pmu: switching to HP
[ 22.144336] init: waitpid returned pid 2398, status = 00000000
[ 22.154134] init: process 'start_tch', pid 2398 exited
[ 24.701947] initialized event id sequence to 14
[ 24.707137] initialized event id sequence to 14
[ 27.672422] init: processing action 0x4ebb8 (property:sys.interactive=active)
[ 27.688053] init: command 'chown' r=-2
[ 27.697948] init: command 'chmod' r=-2
[ 27.710794] init: command 'chown' r=-2
[ 27.723179] init: command 'chmod' r=-2
[ 27.727055] init: command 'chown' r=-2
[ 27.730969] init: command 'chmod' r=-2
[ 27.743323] init: command 'chown' r=-2
[ 27.764509] init: command 'chmod' r=-2
[ 27.786195] init: command 'chown' r=-2
[ 27.790064] init: command 'chmod' r=-2
[ 27.804763] init: command 'chown' r=-2
[ 27.808693] init: command 'chmod' r=-2
[ 27.812548] init: command 'chown' r=-2
[ 27.849865] init: command 'chmod' r=-2
[ 27.860981] init: command 'chown' r=-2
[ 27.866875] init: command 'chmod' r=-2
[ 27.870753] init: command 'chown' r=-2
[ 27.883194] init: command 'chmod' r=-2
[ 27.888260] init: command 'chown' r=-2
[ 27.892129] init: command 'chmod' r=-2
[ 29.439456] request_suspend_state: wakeup (3->0) at 29106509005 (1970-01-02 00:00:02.111977334 UTC)
[ 29.450936] cpufreq_interactive_input_connect: connect to FT5X06
[ 29.458123] init: processing action 0x4ebb8 (property:sys.interactive=active)
[ 29.470252] init: command 'chown' r=0
[ 29.492442] init: command 'chmod' r=0
[ 29.508966] init: command 'chown' r=0
[ 29.518502] init: command 'chmod' r=0
[ 29.529065] init: command 'chown' r=0
[ 29.542499] init: command 'chmod' r=0
[ 29.573301] init: command 'chown' r=0
[ 29.577149] init: command 'chmod' r=0
[ 29.580933] init: command 'chown' r=0
[ 29.632786] init: command 'chmod' r=0
[ 29.636991] init: command 'chown' r=0
[ 29.645381] init: command 'chmod' r=0
[ 29.650684] init: command 'chown' r=0
[ 29.667715] init: command 'chmod' r=0
[ 29.671507] init: command 'chown' r=0
[ 29.697373] init: command 'chmod' r=0
[ 29.711778] init: command 'chown' r=0
[ 29.733136] init: command 'chmod' r=0
[ 29.736941] init: command 'chown' r=-2
[ 29.740858] init: command 'chmod' r=-2
[ 29.760044] init: processing action 0x4f218 (property:sys.sysctl.extra_free_kbytes=*)
[ 29.787160] init: command 'write' r=-2
[ 29.894020] eth0: Freescale FEC PHY driver [Generic PHY] (mii_bushy_addr=1:00, irq=-1)
[ 29.902399] PHY register address:0x0,value=0x1000
[ 29.960287] New PHY register address:0x0,value=0x1000
[ 29.965744] PHY register address:7.16,value=0x1ffa
[ 29.970822] PHY register address:7.16,value=0x1ffa
[ 29.976193] PHY register address:7.14,value=0x0
[ 29.980906] PHY register address:7.14,value=0x0
[ 29.985795] +++++++++++++++++++++++++++++++++++++++++++++++++++++
[ 29.992194] RTL8201 Page 0 reg 0,value=0x1000
[ 29.996947] RTL8201 Page 0 reg 1,value=0x7849
[ 30.001402] RTL8201 Page 0 reg 2,value=0x1c
[ 30.006026] RTL8201 Page 0 reg 3,value=0xc816
[ 30.011340] RTL8201 Page 0 reg 4,value=0x1e1
[ 30.016568] RTL8201 Page 0 reg 5,value=0x1
[ 30.020766] RTL8201 Page 0 reg 6,value=0x4
[ 30.025293] RTL8201 Page 0 reg 7,value=0x0
[ 30.029542] RTL8201 Page 0 reg 8,value=0x0
[ 30.034989] RTL8201 Page 0 reg 9,value=0x0
[ 30.039210] RTL8201 Page 0 reg 10,value=0x0
[ 30.044032] RTL8201 Page 0 reg 11,value=0x0
[ 30.048330] RTL8201 Page 0 reg 12,value=0x0
[ 30.057606] RTL8201 Page 0 reg 13,value=0x0
[ 30.061949] RTL8201 Page 0 reg 14,value=0x0
[ 30.066605] RTL8201 Page 0 reg 15,value=0x0
[ 30.070941] RTL8201 Page 0 reg 16,value=0x31f
[ 30.075855] RTL8201 Page 0 reg 17,value=0x1f10
[ 30.080396] RTL8201 Page 0 reg 18,value=0x12
[ 30.085082] RTL8201 Page 0 reg 19,value=0x5e21
[ 30.089620] RTL8201 Page 0 reg 20,value=0x3e3e
[ 30.095475] RTL8201 Page 0 reg 21,value=0x2c5
[ 30.100431] RTL8201 Page 0 reg 22,value=0x5b85
[ 30.105323] RTL8201 Page 0 reg 23,value=0x1
[ 30.110602] RTL8201 Page 0 reg 24,value=0x8310
[ 30.115629] RTL8201 Page 0 reg 25,value=0x0
[ 30.120074] RTL8201 Page 0 reg 26,value=0x4000
[ 30.124996] RTL8201 Page 0 reg 27,value=0xc00a
[ 30.129720] RTL8201 Page 0 reg 28,value=0x40c6
[ 30.134621] RTL8201 Page 0 reg 29,value=0x0
[ 30.138901] RTL8201 Page 0 reg 30,value=0x0
[ 30.143468] RTL8201 Page 4 reg 16,value=0x7377
[ 30.148088] RTL8201 Page 4 reg 21,value=0xc5a0
[ 30.152646] RTL8201 Page 7 reg 16,value=0x1ffa
[ 30.157557] RTL8201 Page 7 reg 17,value=0xf12
[ 30.162091] RTL8201 Page 7 reg 18,value=0x7720
[ 30.166942] RTL8201 Page 7 reg 19,value=0x403c
[ 30.171558] RTL8201 Page 7 reg 20,value=0x30d5
[ 30.176548] RTL8201 Page 7 reg 24,value=0x0
[ 30.181632] +++++++++++++++++++++++++++++++++++++++++++++++++++++
[ 30.189823] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 30.729859] dhd_module_init in
[ 30.738885] found wifi platform device bcmdhd_wlan
[ 30.750231] Power-up adapter 'DHD generic adapter'
[ 30.760071] acc_open
[ 30.762398] acc_release
[ 30.785238] wifi_platform_set_power = 1
[ 30.791845] power up wlan!!!!!!
[ 30.969779] init: processing action 0x4ebb8 (property:sys.interactive=active)
[ 30.985509] init: command 'chown' r=0
[ 31.000842] init: command 'chmod' r=0
[ 31.025096] init: command 'chown' r=0
[ 31.028886] init: command 'chmod' r=0
[ 31.033331] dhd_customer_card_detect: got mmc_host(d6268000), call mmc_detect_change()
[ 31.083593] init: command 'chown' r=0
[ 31.101091] init: command 'chmod' r=0
[ 31.134216] init: command 'chown' r=0
[ 31.138004] init: command 'chmod' r=0
[ 31.159172] init: command 'chown' r=0
[ 31.184379] init: command 'chmod' r=0
[ 31.206168] init: command 'chown' r=0
[ 31.243329] init: command 'chmod' r=0
[ 31.247179] init: command 'chown' r=0
[ 31.283011] wifi_platform_bus_enumerate device present 1
[ 31.288700] init: command 'chmod' r=0
[ 31.292542] init: command 'chown' r=0
[ 31.298675] bcm_wifi_set_carddetect: 1
[ 31.322865] bcm_wifi_set_carddetect: Nobody to notify
[ 31.340182] init: command 'chmod' r=0
[ 31.381628] init: command 'chown' r=0
[ 31.428715] init: command 'chmod' r=0
[ 31.432515] init: command 'chown' r=-2
[ 31.465406] init: command 'chmod' r=-2
[ 31.763839] init: processing action 0x52908 (property:sys.usb.config=none)
[ 31.779629] init: command 'stop' r=0
[ 31.803194] init: command 'write' r=0
[ 31.813562] init: command 'write' r=0
[ 31.822662] init: command 'setprop' r=0
[ 31.871833] init: processing action 0x56ad0 (property:sys.usb.config=mtp)
[ 31.888128] android_usb: already disabled
[ 31.894495] init: command 'write' r=0
[ 31.907150] init: command 'write' r=0
[ 31.924078] init: command 'write' r=0
[ 31.937541] init: command 'write' r=0
[ 31.954142] mtp_bind_config
[ 31.971081] init: command 'write' r=0
[ 31.976664] init: command 'setprop' r=0
[ 33.615329] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 33.992698] mmc1: mmc_sdio_init_card: trying to alloc card
[ 34.073176] mmc1: mmc_sdio_init_card: mmc type is sdio
[ 34.124910] mmc1: mmc_sdio_init_card: trying to read cccr register
[ 34.225417] mmc_host_uhs = 1618185231
[ 34.296755] Foxconn debug SDIO running on SDIO 3.0 data = 7
[ 34.443187] mmc1: queuing unknown CIS tuple 0x80 (2 bytes)
[ 34.472224] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 34.474656] mmc1: queuing unknown CIS tuple 0x80 (3 bytes)
[ 34.489440] mmc1: queuing unknown CIS tuple 0x80 (7 bytes)
[ 34.505297] type=1400 audit(86407.170:5): avc: denied { search } for pid=3166 comm="ast.xfinityhome" name="com.comcast.xfinityhome" dev=mmcblk0p10 ino=230 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 34.647499] mmc1: mmc_sdio_init_card: trying to read sis register
[ 35.029629] type=1400 audit(86407.690:6): avc: denied { getattr } for pid=3166 comm="ast.xfinityhome" path="/data/app" dev=mmcblk0p10 ino=37 scontext=u:r:untrusted_app:s0 tcontext=ubject_r:apk_data_file:s0 tclass=dir
[ 35.221360] ########## mmc_sdio_init_card:808##########
[ 35.316016] ####init func error : 0##############
[ 35.376473] ####init func error : 0##############
[ 35.381320] mmc1: new ultra high speed SDIO card at address 0001
[ 35.464129] In Event 1: Event Number is 1
[ 35.483699] Error: Driver 'mxc_mipi_dsi' is already registered, aborting...
[ 35.559254] mipi_dsi_driver register failed
[ 35.595677] notifier_call_chain error
[ 35.634590] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 35.642662] bcmsdh_sdmmc: bcmsdh_sdmmc_probe Enter
[ 35.681371] bus num (host idx)=1, slot num (rca)=1
[ 35.766052] found adapter info 'DHD generic adapter'
[ 35.886387] F1 signature OK, socitype:0x1 chip:0x4324 rev:0x5 pkg:0xd
[ 35.984942] DHD: dongle ram size is set to 589824(orig 589824) at 0x0
[ 36.052668] wifi_platform_prealloc: failed to alloc static mem section 7
[ 36.116866] wl_create_event_handler(): thread:wl_event_handler:cad started
[ 36.124206] CFG80211-INFO2) wl_event_handler : tsk Enter, tsk = 0xd33813f4
[ 36.199353] p2p0: P2P Interface Registered
[ 36.207633] dhd_attach(): thread:dhd_watchdog_thread:cb7 started
[ 36.263199] dhd_attach(): thread:dhd_dpc:cba started
[ 36.302737] dhd_deferred_work_init: work queue initialized
[ 36.351387] dhdsdio_download_firmware: firmware path=/etc/firmware/bcm43241.bin, nvram path=/etc/firmware/bcm43241nvram.cal
[ 36.630667] sdioh_request_buffer: [1] doing memory copy buf=d2878000, len=1273
[ 36.662353] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 36.811626] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 36.827077] add wake up source irq 108
[ 36.847287] Firmware up: op_mode=0x0015, MAC=2c:db:0d
[ 36.868435] dhdcdc_set_ioctl: SET PM to 48
[ 36.881718] dhd_wl_ioctl: WLC_IOCTL: cmd: 86, ret = -1
[ 36.893027] [WIFI_SEC] sec_control_pm: /data/.psm.info open failed, so set PM to 48
[ 36.923328] [WIFI_SEC] dhd_sel_ant_from_file: File [/data/.ant.info] open error
[ 36.966725] Firmware version = wl0: Oct 28 2015 01:47:42 version 6.10.197.117 (r595661) FWID 01-bf102184
[ 37.003519] [WIFI_SEC] .wifiver.info already saved.
[ 37.029386] dhd_wlfc_init(): successfully enabled bdcv2 tlv signaling, 79
[ 37.049371] dhd_wlfc_init(): wlfc_mode=0x0, ret=-23
[ 37.067102] [WIFI_SEC] dhd_check_module_mac: Check module mac by legacy FW : 2c:db:0d
[ 37.110339] Dongle Host Driver, version 1.141.85 (r)
[ 37.110347] Compiled in drivers/net/wireless/bcmdhd on Apr 26 2017 at 13:57:11
[ 37.191897] Register interface [wlan0] MAC: 2c:db:0d
[ 37.191902]
[ 37.275025] init: computing context for service '/system/bin/wpa_supplicant'
[ 37.291390] init: starting 'wpa_supplicant'
[ 37.318097] init: Created socket '/dev/socket/wpa_wlan0' with mode '660', user '1010', group '1010'
[ 37.643373] CFG80211-INFO2) wl_cfg80211_attach_post : p2p0: p2p_dev_addr=2e:db:0d
[ 38.445142] type=1400 audit(86411.110:7): avc: denied { getattr } for pid=3166 comm="ast.xfinityhome" path="/data/data/com.comcast.xfinityhome/code_cache" dev=mmcblk0p10 ino=331 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 38.486536] type=1400 audit(86411.150:8): avc: denied { open } for pid=3166 comm="ast.xfinityhome" name="MultiDex.lock" dev=mmcblk0p10 ino=515 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=file
[ 38.509904] type=1400 audit(86411.170:9): avc: denied { lock } for pid=3166 comm="ast.xfinityhome" path="/data/data/com.comcast.xfinityhome/code_cache/secondary-dexes/MultiDex.lock" dev=mmcblk0p10 ino=515 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=file
[ 38.722195] type=1400 audit(86411.380:10): avc: denied { write } for pid=3273 comm="pool-11-thread-" name="shared_prefs" dev=mmcblk0p10 ino=404 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 38.770788] type=1400 audit(86411.430:11): avc: denied { remove_name } for pid=3273 comm="pool-11-thread-" name="CRASH_PREFERENCES.xml" dev=mmcblk0p10 ino=535 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 38.799856] type=1400 audit(86411.460:12): avc: denied { rename } for pid=3273 comm="pool-11-thread-" name="CRASH_PREFERENCES.xml" dev=mmcblk0p10 ino=535 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=file
[ 38.835059] type=1400 audit(86411.500:13): avc: denied { add_name } for pid=3273 comm="pool-11-thread-" name="CRASH_PREFERENCES.xml.bak" scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 39.883379] init: processing action 0x4eac0 (property:sys.boot_completed=1)
[ 39.896991] init: command 'write' r=0
[ 39.916877] init: command 'write' r=-2
[ 39.941874] init: command 'write' r=0
[ 39.956224] init: sys_prop: permission denied uid:1003 name:service.bootanim.exit
[ 40.045687] init: command 'write' r=0
[ 40.049635] init: command 'write' r=0
[ 40.140829] init: waitpid returned pid 2473, status = 00000000
[ 40.184352] init: process 'bootanim', pid 2473 exited
[ 40.971675] rfkill: BT RF going to : off
[ 41.002794] bluetooth power off mx6_bt_power_change!!!
[ 41.055915] rfkill: BT RF going to : on
[ 41.069393] bluetooth power on mx6_bt_power_change!!!
[ 42.592758] audit_printk_skb: 21 callbacks suppressed
[ 42.917695] type=1400 audit(86415.250:21): avc: denied { search } for pid=3316 comm="AnalyticsHandle" name="com.comcast.xfinityhome" dev=mmcblk0p10 ino=230 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 45.215691] type=1400 audit(86417.880:22): avc: denied { lock } for pid=3316 comm="AnalyticsHandle" path="/data/data/com.comcast.xfinityhome/databases/com.localytics.android.cb796d1c60986c4e90e6455e35388d6a97ad27d2c5a61180e418e355a00ba009.analytics.sqlite" dev=mmcblk0p10 ino=464 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=file
[ 48.124869] type=1400 audit(86420.790:23): avc: denied { open } for pid=3316 comm="AnalyticsHandle" name="com.localytics.android.cb796d1c60986c4e90e6455e35388d6a97ad27d2c5a61180e418e355a00ba009.analytics.sqlite-journal" dev=mmcblk0p10 ino=480 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=file
[ 50.038810] initialized event id sequence to 86422
[ 52.146952] type=1400 audit(86424.810:24): avc: denied { setattr } for pid=3316 comm="AnalyticsHandle" name="com.localytics.android.cb796d1c60986c4e90e6455e35388d6a97ad27d2c5a61180e418e355a00ba009.analytics.sqlite-journal" dev=mmcblk0p10 ino=480 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=file
[ 54.897360] turn on screen
[ 56.535691] type=1400 audit(86429.200:25): avc: denied { read } for pid=3316 comm="AnalyticsHandle" name="databases" dev=mmcblk0p10 ino=454 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 57.665323] type=1400 audit(86430.330:26): avc: denied { open } for pid=3316 comm="AnalyticsHandle" name="databases" dev=mmcblk0p10 ino=454 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 66.337257] type=1400 audit(86439.000:27): avc: denied { getattr } for pid=3722 comm="yhome:analytics" path="/data/data/com.comcast.xfinityhome/code_cache" dev=mmcblk0p10 ino=331 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 67.544200] type=1400 audit(86440.210:28): avc: denied { write } for pid=3784 comm="pool-11-thread-" name="shared_prefs" dev=mmcblk0p10 ino=404 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 67.753456] type=1400 audit(86440.420:29): avc: denied { remove_name } for pid=3784 comm="pool-11-thread-" name="CRASH_PREFERENCES.xml" dev=mmcblk0p10 ino=543 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 67.967795] type=1400 audit(86440.630:30): avc: denied { rename } for pid=3784 comm="pool-11-thread-" name="CRASH_PREFERENCES.xml" dev=mmcblk0p10 ino=543 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=file
[ 68.143208] type=1400 audit(86440.810:31): avc: denied { add_name } for pid=3784 comm="pool-11-thread-" name="CRASH_PREFERENCES.xml.bak" scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=dir
[ 68.405163] type=1400 audit(86441.070:32): avc: denied { create } for pid=3784 comm="pool-11-thread-" name="CRASH_PREFERENCES.xml" scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=file
[ 68.611250] type=1400 audit(86441.270:33): avc: denied { ioctl } for pid=3784 comm="pool-11-thread-" path="/data/data/com.comcast.xfinityhome/shared_prefs/CRASH_PREFERENCES.xml" dev=mmcblk0p10 ino=549 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=file
[ 69.037805] type=1400 audit(86441.700:34): avc: denied { unlink } for pid=3784 comm="pool-11-thread-" name="CRASH_PREFERENCES.xml.bak" dev=mmcblk0p10 ino=543 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=file
[ 73.001772] type=1400 audit(86445.660:35): avc: denied { read write } for pid=3920 comm="RxCachedThreadS" name="access_control.new_commit.cv" dev=mmcblk0p10 ino=436 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=fifo_file
[ 73.410468] type=1400 audit(86446.070:36): avc: denied { open } for pid=3920 comm="RxCachedThreadS" name="access_control.new_commit.cv" dev=mmcblk0p10 ino=436 scontext=u:r:untrusted_app:s0 tcontext=ubject_rlatform_app_data_file:s0 tclass=fifo_file
ff
localhost login: root
Password:
Login incorrect
localhost login: root
Password:
Login incorrect
localhost login: [ 375.251440] init: waitpid returned pid 2330, status = 00000100
[ 375.258853] init: untracked pid 2330 exited
[ 375.263754] init: waitpid returned pid 4361, status = 00000100
[ 375.269731] init: untracked pid 4361 exited
[ 376.026526] dhd_pno_get_for_batch : wifi location service is not supported
[ 376.066891] failed to getting batching results
[ 376.080700] dhd_pno_stop_for_batch : wifi location service is not supported
[ 376.100943] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
[ 376.109535] NULL POINTER (_dhd_pno_clear_all_batch_results) : head->next is NULL
[ 376.117317] failed to stop batching scan
[ 376.274265] init: service 'wpa_supplicant' is being killed
[ 376.304829] init: waitpid returned pid 3267, status = 00000009
[ 376.310750] init: process 'wpa_supplicant', pid 3267 exited
[ 376.586847] remove wake up source irq 108
[ 376.590942] dhd_prot_ioctl : bus is down. we have nothing to do
[ 376.612624] dhd_wlfc_deinit():3271, ampdu_hostreorder get failed Err = -1
[ 376.643004] dhd_prot_ioctl : bus is down. we have nothing to do
[ 376.660428] dhd_wl_ioctl: WLC_SET_VAR: tlv, ret = -1
[ 376.678450] dhd_wlfc_deinit():3294 failed to enable/disable bdcv2 tlv signaling Err = -1
[ 376.783376] dhd_detach(): thread:dhd_watchdog_thread:cb7 terminated OK
[ 376.793309] dhd_dpc_thread: Unexpected up_cnt 0
[ 376.797988] dhd_detach(): thread:dhd_dpc:cba terminated OK
[ 376.863099] CFG80211-INFO2) wl_event_handler : was terminated
[ 376.869067] wl_destroy_event_handler(): thread:wl_event_handler:cad terminated OK
[ 376.913241] wifi_platform_prealloc: failed to alloc static mem section 7
[ 376.943157] found wifi platform device bcmdhd_wlan
[ 376.948135] unregister wifi platform drivers
[ 376.952490] wifi_platform_set_power = 0
[ 376.962983] power down wlan!!!!!!
[ 376.966632] dhd_customer_card_detect: got mmc_host(d6268000), call mmc_detect_change()
[ 377.103005] wifi_platform_bus_enumerate device present 0
[ 377.108450] bcm_wifi_set_carddetect: 0
[ 377.126238] bcm_wifi_set_carddetect: Nobody to notify
[ 379.529456] mmc1: card 0001 removed
[ 379.573017] mmc1: mmc_rescan_try_freq: trying to init card at 400000 Hz
[ 379.663002] mmc1: mmc_rescan_try_freq: trying to init card at 300000 Hz
[ 379.752966] mmc1: mmc_rescan_try_freq: trying to init card at 200000 Hz
[ 379.842968] mmc1: mmc_rescan_try_freq: trying to init card at 100000 Hz
[ 379.911089] In Event 1: Event Number is 1
[ 379.915467] Error: Driver 'mxc_mipi_dsi' is already registered, aborting...
[ 379.922499] mipi_dsi_driver register failed
[ 379.927084] notifier_call_chain error
[ 394.614115] dhd_module_init in
[ 394.617465] found wifi platform device bcmdhd_wlan
[ 394.622561] Power-up adapter 'DHD generic adapter'
[ 394.628527] wifi_platform_set_power = 1
[ 394.632436] power up wlan!!!!!!
[ 394.873177] dhd_customer_card_detect: got mmc_host(d6268000), call mmc_detect_change()

I'll add some pictures to the thread of the insides. Trying to repurpose the screen from something like Pi...
Looks like it's using the android 4.2.2 - https://www.vantiva.com/app/uploads/2023/01/tca300_v1.0_oss_publication_0.pdf
We can also request the opens source software by contacting them - [email protected]
Source - https://www.vantiva.com/regulatory-information/?category=&product=tca300&doc_type=&query=
Screen Label
m-qst7m0128a
AQ2017/01/28/30165 - same as barcode
40 pin cable

Average8821 said:
I'll add some pictures to the thread of the insides. Trying to repurpose the screen from something like Pi...
Looks like it's using the android 4.2.2 - https://www.vantiva.com/app/uploads/2023/01/tca300_v1.0_oss_publication_0.pdf
We can also request the opens source software by contacting them - [email protected]
Source - https://www.vantiva.com/regulatory-information/?category=&product=tca300&doc_type=&query=
Screen Label
m-qst7m0128a
AQ2017/01/28/30165 - same as barcode
40 pin cable
Click to expand...
Click to collapse
Thanks for getting the picts up! The serial (uart) port I connected to is on your first image. the 2 rows of 6 solder / test points to the left of the power connector. Serial is on the upper row of points, 3 and 4 from the left ... or right for that matter. Labeled TP22 and TP23. 23 is the Board ts 24 is Board rx. If you hold the little black switch down above and to the right of the usb port , uboot reports "Fastboot normal" during boot up . When you get booted up and hit enter it gives a Localhost login prompt. Only login I have found is root, have tried multiple generic passwords ..... no success yet.

jimmybobby said:
Thanks for getting the picts up! The serial (uart) port I connected to is on your first image. the 2 rows of 6 solder / test points to the left of the power connector. Serial is on the upper row of points, 3 and 4 from the left ... or right for that matter. Labeled TP22 and TP23. 23 is the Board ts 24 is Board rx. If you hold the little black switch down above and to the right of the usb port , uboot reports "Fastboot normal" during boot up . When you get booted up and hit enter it gives a Localhost login prompt. Only login I have found is root, have tried multiple generic passwords ..... no success yet.
Click to expand...
Click to collapse
update: the little black switch needs to be pressed , you can stop u-boot but requires a security code.

Random hard reboots

Hi guys,
I am experiencing random reboots on one of my one plus one devices.
Long story short:
reboots seem to started happening after switching to a certain carrier (Swisscom)
one of my OPOs is fine, even with the Swisscom sim card, whereas the other is affected by reboots
reboots happen even when the phone is sitting on its own, I could not identify a specific use case that triggers them
reboots happened both on stock rom and on resurrection remix (ResurrectionRemix-M-v5.7.4-20161117-bacon)
reboots seem to happen only when connected to the carrier (not in airplane mode i.e. or wifi only)
Please, see below.
Any idea?
Thanks
drive.google.com/file/d/0B_8rkSiZf4DORVhVQmZRb0R6WWc/view?usp=sharing Here the last_kmsg
Code:
[ 1376.252565] diag: Invalid private data
[ 1376.255702] smd_write_start: packet header failed to write
[ 1376.255779] msm_ipc_router_smd_remote_write: ipc_rtr_smd_ipcrtr chnl reset
[ 1376.255847] smd_write_start: packet header failed to write
[ 1376.255907] msm_ipc_router_smd_remote_write: ipc_rtr_smd_ipcrtr chnl reset
[ 1376.263753] mmc0: Starting deferred resume
[ 1376.397649] mmc0: Deferred resume completed
[ 1376.788145] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset
[ 1376.870168] Notify: smsm init
[ 1386.786487] subsys-restart: wait_for_err_ready(): [modem]: Error ready timed out
[ 1386.788152] modem_notifier_cb: sysmon_send_event error -38
[ 1386.788365] M-Notify: General: 5
[ 1386.788917] Kernel panic - not syncing: [dcde0f00]: Timed out waiting for error ready: modem!
[ 1386.789177] [<c010e24c>] (unwind_backtrace+0x0/0x148) from [<c0cd5494>] (panic+0xa4/0x1fc)
[ 1386.789582] [<c0cd5494>] (panic+0xa4/0x1fc) from [<c017ade8>] (subsystem_restart_wq_func+0x550/0x58c)
[ 1386.789985] [<c017ade8>] (subsystem_restart_wq_func+0x550/0x58c) from [<c01c8d8c>] (process_one_work+0x178/0x4c4)
[ 1386.790379] [<c01c8d8c>] (process_one_work+0x178/0x4c4) from [<c01c94bc>] (worker_thread+0x190/0x40c)
[ 1386.790764] [<c01c94bc>] (worker_thread+0x190/0x40c) from [<c01cf914>] (kthread+0xbc/0xc0)
[ 1386.790996] [<c01cf914>] (kthread+0xbc/0xc0) from [<c01080b4>] (kernel_thread_exit+0x0/0x8)
[ 1386.791363] CPU2: stopping
[ 1386.791432] [<c010e24c>] (unwind_backtrace+0x0/0x148) from [<c010cbc4>] (handle_IPI+0x1c4/0x1e0)
[ 1386.791533] [<c010cbc4>] (handle_IPI+0x1c4/0x1e0) from [<c0100680>] (gic_handle_irq+0xb0/0x100)
[ 1386.791626] [<c0100680>] (gic_handle_irq+0xb0/0x100) from [<c010731c>] (__irq_usr+0x3c/0x60)
[ 1386.791715] Exception stack(0xdae53fb0 to 0xdae53ff8)
[ 1386.791766] 3fa0: 9efb2d78 331ae060 00000000 0000c534
[ 1386.791855] 3fc0: 000066ad 331ae060 331ae2c0 9efb3b90 9ea3f858 9443ba00 9443ba8c 9ea3f5c4
[ 1386.791944] 3fe0: 00000000 9ea3f510 a0b45869 7287f3a4 000f0030 ffffffff
[ 1386.792036] CPU3: stopping
[ 1386.792571] [<c010e24c>] (unwind_backtrace+0x0/0x148) from [<c010cbc4>] (handle_IPI+0x1c4/0x1e0)
[ 1386.792964] [<c010cbc4>] (handle_IPI+0x1c4/0x1e0) from [<c0100680>] (gic_handle_irq+0xb0/0x100)
[ 1386.793354] [<c0100680>] (gic_handle_irq+0xb0/0x100) from [<c0107140>] (__irq_svc+0x40/0x74)
[ 1386.793719] Exception stack(0xee18df10 to 0xee18df58)
[ 1386.793926] df00: 8d4fdf3b 83126e97 060225a0 00002f57
[ 1386.794296] df20: 00000003 c1499380 00b8ebe4 00000000 cea76f60 ee18c028 005eae06 00000000
[ 1386.794664] df40: 00000000 ee18df58 00000000 c018e4c0 00000013 ffffffff
[ 1386.794900] [<c0107140>] (__irq_svc+0x40/0x74) from [<c018e4c0>] (lpm_cpuidle_enter+0x148/0x168)
[ 1386.795295] [<c018e4c0>] (lpm_cpuidle_enter+0x148/0x168) from [<c07846e8>] (cpuidle_enter_state+0x24/0x7c)
[ 1386.795678] [<c07846e8>] (cpuidle_enter_state+0x24/0x7c) from [<c0784804>] (cpuidle_idle_call+0xc4/0x214)
[ 1386.796060] [<c0784804>] (cpuidle_idle_call+0xc4/0x214) from [<c0108388>] (cpu_idle+0x90/0x118)
[ 1386.796437] [<c0108388>] (cpu_idle+0x90/0x118) from [<00cd0bd4>] (0xcd0bd4)
[ 1386.796870] wcnss crash shutdown 0
[ 1386.797111] Rebooting in 5 seconds..
[ 1391.799303] Going down for restart now

theoldbarneys said:
Hi guys,
I am experiencing random reboots on one of my one plus one devices.
Long story short:
reboots seem to started happening after switching to a certain carrier (Swisscom)
one of my OPOs is fine, even with the Swisscom sim card, whereas the other is affected by reboots
reboots happen even when the phone is sitting on its own, I could not identify a specific use case that triggers them
reboots happened both on stock rom and on resurrection remix (ResurrectionRemix-M-v5.7.4-20161117-bacon)
reboots seem to happen only when connected to the carrier (not in airplane mode i.e. or wifi only)
Please, see below.
Any idea?
Thanks
drive.google.com/file/d/0B_8rkSiZf4DORVhVQmZRb0R6WWc/view?usp=sharing Here the last_kmsg
Code:
[ 1376.252565] diag: Invalid private data
[ 1376.255702] smd_write_start: packet header failed to write
[ 1376.255779] msm_ipc_router_smd_remote_write: ipc_rtr_smd_ipcrtr chnl reset
[ 1376.255847] smd_write_start: packet header failed to write
[ 1376.255907] msm_ipc_router_smd_remote_write: ipc_rtr_smd_ipcrtr chnl reset
[ 1376.263753] mmc0: Starting deferred resume
[ 1376.397649] mmc0: Deferred resume completed
[ 1376.788145] pil-q6v5-mss fc880000.qcom,mss: modem: Brought out of reset
[ 1376.870168] Notify: smsm init
[ 1386.786487] subsys-restart: wait_for_err_ready(): [modem]: Error ready timed out
[ 1386.788152] modem_notifier_cb: sysmon_send_event error -38
[ 1386.788365] M-Notify: General: 5
[ 1386.788917] Kernel panic - not syncing: [dcde0f00]: Timed out waiting for error ready: modem!
[ 1386.789177] [<c010e24c>] (unwind_backtrace+0x0/0x148) from [<c0cd5494>] (panic+0xa4/0x1fc)
[ 1386.789582] [<c0cd5494>] (panic+0xa4/0x1fc) from [<c017ade8>] (subsystem_restart_wq_func+0x550/0x58c)
[ 1386.789985] [<c017ade8>] (subsystem_restart_wq_func+0x550/0x58c) from [<c01c8d8c>] (process_one_work+0x178/0x4c4)
[ 1386.790379] [<c01c8d8c>] (process_one_work+0x178/0x4c4) from [<c01c94bc>] (worker_thread+0x190/0x40c)
[ 1386.790764] [<c01c94bc>] (worker_thread+0x190/0x40c) from [<c01cf914>] (kthread+0xbc/0xc0)
[ 1386.790996] [<c01cf914>] (kthread+0xbc/0xc0) from [<c01080b4>] (kernel_thread_exit+0x0/0x8)
[ 1386.791363] CPU2: stopping
[ 1386.791432] [<c010e24c>] (unwind_backtrace+0x0/0x148) from [<c010cbc4>] (handle_IPI+0x1c4/0x1e0)
[ 1386.791533] [<c010cbc4>] (handle_IPI+0x1c4/0x1e0) from [<c0100680>] (gic_handle_irq+0xb0/0x100)
[ 1386.791626] [<c0100680>] (gic_handle_irq+0xb0/0x100) from [<c010731c>] (__irq_usr+0x3c/0x60)
[ 1386.791715] Exception stack(0xdae53fb0 to 0xdae53ff8)
[ 1386.791766] 3fa0: 9efb2d78 331ae060 00000000 0000c534
[ 1386.791855] 3fc0: 000066ad 331ae060 331ae2c0 9efb3b90 9ea3f858 9443ba00 9443ba8c 9ea3f5c4
[ 1386.791944] 3fe0: 00000000 9ea3f510 a0b45869 7287f3a4 000f0030 ffffffff
[ 1386.792036] CPU3: stopping
[ 1386.792571] [<c010e24c>] (unwind_backtrace+0x0/0x148) from [<c010cbc4>] (handle_IPI+0x1c4/0x1e0)
[ 1386.792964] [<c010cbc4>] (handle_IPI+0x1c4/0x1e0) from [<c0100680>] (gic_handle_irq+0xb0/0x100)
[ 1386.793354] [<c0100680>] (gic_handle_irq+0xb0/0x100) from [<c0107140>] (__irq_svc+0x40/0x74)
[ 1386.793719] Exception stack(0xee18df10 to 0xee18df58)
[ 1386.793926] df00: 8d4fdf3b 83126e97 060225a0 00002f57
[ 1386.794296] df20: 00000003 c1499380 00b8ebe4 00000000 cea76f60 ee18c028 005eae06 00000000
[ 1386.794664] df40: 00000000 ee18df58 00000000 c018e4c0 00000013 ffffffff
[ 1386.794900] [<c0107140>] (__irq_svc+0x40/0x74) from [<c018e4c0>] (lpm_cpuidle_enter+0x148/0x168)
[ 1386.795295] [<c018e4c0>] (lpm_cpuidle_enter+0x148/0x168) from [<c07846e8>] (cpuidle_enter_state+0x24/0x7c)
[ 1386.795678] [<c07846e8>] (cpuidle_enter_state+0x24/0x7c) from [<c0784804>] (cpuidle_idle_call+0xc4/0x214)
[ 1386.796060] [<c0784804>] (cpuidle_idle_call+0xc4/0x214) from [<c0108388>] (cpu_idle+0x90/0x118)
[ 1386.796437] [<c0108388>] (cpu_idle+0x90/0x118) from [<00cd0bd4>] (0xcd0bd4)
[ 1386.796870] wcnss crash shutdown 0
[ 1386.797111] Rebooting in 5 seconds..
[ 1391.799303] Going down for restart now
Click to expand...
Click to collapse
Are you sure sim is inserted correctly?
Did you try reinserting it?

Mr.Ak said:
Are you sure sim is inserted correctly?
Did you try reinserting it?
Click to expand...
Click to collapse
Hi,
yes, tried several times.
Also, let me add the fact that this OPO has a couple of years of perfect service, so I would exclude HW problems.

theoldbarneys said:
Hi,
yes, tried several times.
Also, let me add the fact that this OPO has a couple of years of perfect service, so I would exclude HW problems.
Click to expand...
Click to collapse
Try clean flashing Cos through fastboot.

Mr.Ak said:
Try clean flashing Cos through fastboot.
Click to expand...
Click to collapse
Yep, done that already with twrp and installed a fresh resurrection remix

Database Info

welcome

SDCard Missing when using Adopted Storage - Moto G 2015 Q&A, Help & Troubleshooting

Related

[Q]

[Q] Random reboot debugging help needed

Rooted OPO reboot issue

Xfinity Home Touchscreen to Android OS?

Random hard reboots

Categories

Resources