Database Info

[Q] "working phone", but black screen after the boot logo

Hello guys,
some days ago my phone was permantly booting up in the recovery mode nothing else was possible. As I was on road and couldn't access internet anywhere I just tried to do some wipes, which then made my phone not show anything. I guess the reason that it didn't boot up anymore was that the battery was fully drained. When I was finally back home I was able to charge my phone but then the following happend:
I can start my OPO, see the android logo and then it turns black, but it fully boots up. I mean I can even click the touchscreen and hear some touch reactions/sounds. Also I'm able to turn up/down the volume and hear my phone. Furthermore I'm also able to do the "V-gesture" to turn on the flashlight. When I boot up into fastboot mode I also see the message "fastboot mode" + the little cyanogen face.
All in all everything seems to work, aside that I dont see anything else than dark after the logo.
I tried flashing new roms, stock reset, like seriously anything, but I can't get my phone to work probably again.
Does that mean that my phone got some hardware problems, maybe the touchscreen?
Help is appreciated, thanks in advance!
btw: English isn't my first language, so please excuse any mistakes.

You'll have to try flashing completely stock CM11 rom or CM12 rom, img by img in fastboot..modem, boot, system etc. I helped a friend who had this kind of problem. Probably not the cleanest way, but at least it works.

Already did that 3times using different methods. Stock CM11, CM12 and colorOS

I have a similar problem, did you manage to fix it? And if so, how?
Thanks,
Capelare.

Bricked!

After installing blisspop (or I don't really remember), I realized that WiFi wasn't working and neither was bluetooth so I decided to flash Extended Stock Kernel kernel, first with flashing the boot, then flashing the zip from recovery mode and even after that, the result was the same. It didn't work. Later on I went to the Phantom kernel's page and flashed that without checking that the kernel was meant for 4.4 and it bricked my device. Now, whenever the phone starts, it shows the Phantom kernel boot at start with its logo without any led light appearing below and due to that I'm unable to go into either flashmode or fastboot. It keeps restarting the Phantom boot at start and doesn't go any further. Please help!
EDIT: A more detailed version that I wrote a few months ago to the kernel's developer.
-
Previously I had my Xperia L reset on stock ftp then flashed the Extended Stock Kernel on it. Since the wifi wasn't working, I tried to download R17 and flashed it through CWM and now the phone keeps restarting on the Phantom Logo. It shows the logo, waits for about 10 seconds then restarts and the same keeps repeating. I saw it was for Kitkat but then too I insisted on installing. I can't access neither bootloader nor recovery mode. The light which comes when the Phantom Logo pops doesn't appear either. Can you help me please? Anything would be greatly appreciated. I know I did a stupid thing but I really don't want to give up on this device.
-

Xephor_EX said:
After installing blisspop (or I don't really remember), I realized that WiFi wasn't working and neither was bluetooth so I decided to flash Extended Stock Kernel kernel, first with flashing the boot, then flashing the zip from recovery mode and even after that, the result was the same. It didn't work. Later on I went to the Phantom kernel's page and flashed that without checking that the kernel was meant for 4.4 and it bricked my device. Now, whenever the phone starts, it shows the Phantom kernel boot at start with its logo without any led light appearing below and due to that I'm unable to go into either flashmode or fastboot. It keeps restarting the Phantom boot at start and doesn't go any further. Please help!
EDIT: A more detailed version that I wrote a few months ago to the kernel's developer.
-
Previously I had my Xperia L reset on stock ftp then flashed the Extended Stock Kernel on it. Since the wifi wasn't working, I tried to download R17 and flashed it through CWM and now the phone keeps restarting on the Phantom Logo. It shows the logo, waits for about 10 seconds then restarts and the same keeps repeating. I saw it was for Kitkat but then too I insisted on installing. I can't access neither bootloader nor recovery mode. The light which comes when the Phantom Logo pops doesn't appear either. Can you help me please? Anything would be greatly appreciated. I know I did a stupid thing but I really don't want to give up on this device.
-
Click to expand...
Click to collapse
yea.... output battery... reinput it.... DONT TOUCH POWERBUTTON.... holf vol - and connevt to pc
Sent from my Xperia T using XDA Free mobile app

SdtBarbarossa said:
yea.... output battery... reinput it.... DONT TOUCH POWERBUTTON.... holf vol - and connevt to pc
Sent from my Xperia T using XDA Free mobile app
Click to expand...
Click to collapse
-
It worked, I flashed the generic ftf and everything's okay. Thank you so much!
-

Honor 6 (H60-L04) only Fastboot mode works

Hello everyone,
i have a problem with a Honor 6 from a friend. The phone has an Unlocked bootloader and was rooted.
Then my friend received an Update Notification on the phone and he has done that update. I have said before, that this won't work and it will brick your phone. But i don't know why, he made the Update.
Since then the Phone stucks on bootloader with the "Honor" Logo" AND the LED Notification is blinking first 1 x Red and then 3x in Green. This blinking is repeating 2 or 3 times then only the Honor Logo stays on the screen.
The Phone can access fastboot mode, but not the recovery mode (Volume Up + Power) or the 3-Finger-Mode, to install a stock rom from the sd-card. We have flashed a lot of Roms with the Multitool in the Unbrick Mode, but nothing works, still the same.
Our Problem is:
- We don't know on which version the Phone was before the Update. We know only that it was Kitkat with 4.4.2 and Emui 3.0 --> Maybe this is important for downgrade?
- After the update, he couldn't turn off the phone. So, the phone stayed on until it turned off by itself.
-> When we wanted to enter recovery mode one day later, the screen showed up an Icon with red flash, like the battery was empty.
--> the battery was completely empty because of not turning off -> We charged the battery by connecting the empty battery to another Honor 6 mainboard. After that the icon didn't show up but we still can't enter recovery mode or 3-Finger-Mode.
What can we do now? Every solution would be appreciated.
Thanks in advance

Same problem here. Any hint?

medusa_gorgona said:
Same problem here. Any hint?
Click to expand...
Click to collapse
Until now, i haven't found a solution

works only while charging
seems same is the case with me after updating , it only works when its being charged else only the honor screen and shutting down

me to have same problem

I forgot to say i have an L12.
The only thing that has worked for I have tried is to flashing TWR for emui4.0 from Multitool.
But ROMs and OTAs at this thread are not prepared to be installed via recovery.
I guess I could use an L12 backup to be restored at TWR, if someone can tell me where can I download it.
I want to try everything with stock roms before I try with custom ones.
P.D.: sorry for my bad english.

Finally, I managed to work again.
The steps I followed (keep in mind i have an L12):
Using Multitool -> Unbrick, I extracted the imgs from the B535 ROM
At Stock recovery, I made a factory and cache reset.
I flashed USERDATA from Fastboot
This worked for me.
I hope it helps

i am using l04 and i'm have same problem bro..

OPO stuck in recovery mode

Hi Friends,
I installed cm-13.0-ZNH0EAS2JK and it was running fine but today something weird happened. I rebooted my OPO and it got stuck in TWRP recovery.
No matter what I do, after powering up, it goes to TWRP recovery. I tried to installed another ROM also, but that also didn't helped.
Can someone please help me out over here?

Flash the COS 13.1 fastboot zip using bootloader...

deepakaryan1988 said:
Hi Friends,
I installed cm-13.0-ZNH0EAS2JK and it was running fine but today something weird happened. I rebooted my OPO and it got stuck in TWRP recovery.
No matter what I do, after powering up, it goes to TWRP recovery. I tried to installed another ROM also, but that also didn't helped.
Can someone please help me out over here?
Click to expand...
Click to collapse
I've got the same problem as you, but different build of cm13. Nothing I've tried has worked. Is there something wrong with your volume button by chance? I've researched this issue thoroughly, and that seems to be the common denominator. Apparently the volume button is somehow being pressed, and making the phone boot into recovery when powered on. If you figure it out let me know. It's the bane of my existence right now

Rebooting Problem After ROM Instal....

Hi all, I have a problem with my Galaxy 4+ & really need help that will be such appreciated!!
I installed TWRP recovery threw odin. The went into the recovery, followed all the guides, videos & I was sure
everything was done okay!
I am trying to install DotOS for the J4+ but after I install, do all the wipes etc everyting seems fine, until I go to reboot.
but everytime I reboot it just reboots to TWRP again.. with a msg on the top left of the screenn saying Set Warrenty Bit : recovery
in yellow and no matter what I do I just keep getting back into TWRP the ROM never boots.
Can anyone PLEASE help me out, I have no phone now at the min over this UGHHHH!!!
Il be so so greatful if I can get some help to fix this issue...
regards.