RCA tab 2 can open to restore but cant access the sd card ,
Android kitkat 4.4
Hi,
I can't find any helpful info on this. You should be able to do what you are suggesting, but you need a proper flashable file. And usually that would be a custom ROM. And you'd likely need a custom recovery as well.
As far as accessing the card, you should have an option in your recovery to "mount" and may need to mount the SD card.
Again, I can't find much about this anywhere, so I'm just tossing out ideas. You can register on the site and create a thread here to see if you can find further help, http://forum.xda-developers.com/android/help
Or contact RCA support.
Good luck! :good:
Related
The manufacture for my tablet an irulu x7 running 4.4.2 posted an update that is a zip file containing PhoenixCard & and img file with instructions on how to use it to format the sd card. I followed all of the directions and it says that it finished. The SD card still appears to have no files in windows, when I put the sd card into my tablet and boot up it is supposed to automatically start the install of the new rom (don't have to go into recovery). Of course it does nothing and just boots up normally.
So is there something else I can do another program to get the img onto the SD card they way it should be, or another way to install the img file to the tablet. Any help would be greatly appreciated.
Hi,
I can't find any information about your issue on XDA. You will need to ask here...
> General discussion > Questions and Answers
Hopefully someone that knows about your tablet will be able to help you.
Good luck!
I have a Blue studio 5.5s and after flashing a font it would not boot, I couldn't get a stock rom so I used a My Phone Ocean Pro custom rom that worked. However for some reason the SD CARD will not mount I see it and access it in CWM and flash the phone but android does not see it.
It seems like the whole file system is restricted I tried root explorer an tried to mount it and I receive the message "Sd card is not currently mounted" and in settings for the system the sd card area is not accessible just white. I know the card is good cause CWM sees it and I flash from it but for some reason android is not seeing it nor mounting. Any help would be appreciated.
Hi,
I can't find anything relevant on XDA for your device on this issue. Just because a rom for another device flashed successfully, doesn't mean you won't face issue.... Which may be your problem. You may need a rom specifically made for your device, or the stock firmware.
You can ask for help here,
> Android Development and Hacking > Android Q&A, Help & Troubleshooting
Good luck!
Thank you. Thread closed.
No support from zeki. They said sorry can't help. And past any warranty to return.
Zeki tablet TBQG884B kitkat 4.4.2
I tried a swap ram thing to try increase memory size/speed.
dev_mount sd card change
I didn't quite know what I was doing. Didn't make a backup, etc.
I rooted tablet with kingoroot it's still on it. So is superuser but it asks to download binary files again, but can't because no sd card mounted. Internal or external.
It won't connect to computer usb debuging or mass storage at all.
I can no longer get into system files file explorer etc., to try to reverse/fix what I did.
It said nand flash something instead of sd in video. I now know I shouldn't of edited it.
Is there any way I fix it. Maybe put a different OS on it? If that would fix it? Maybe something from google/android and kitkat?
It works as far as going online with brower. But not much more. won't mount either sd.
I looked everywhere and trying everything. Please help. Thanks.
It said in video to go into sysytem files and change ...
If helps video was: To prevent spam on the XDA forums, ALL new users prevented from posting outside links in their messages. After approximately 10 posts, you will be able to post outside links.
Hello and thank you for using XDA Assist,
please ask in our Android Q&A section:
Android Q&A, Help & Troubleshooting
The experts there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
I am a complete newbie to rooting. I followed the kingoroot guidelines and rooted my Idea Aurus 3 phone. Root was success. The next step I did was downloading custom recovery and cyanogenmod ROM from here to my memory card
I flashed the custom recovery with flashify. The next step I did was wiping all data from the device by entering in to recovery mode (including cache and everything)
I was hoping I could simply install zip from sd card. But when i click on this option, I cannot find my sd card nor zip file (I checked most folders including emmc, etc, sd-ext and couldn't find SD card. The custom recovery name is Phylz touch 6
Now basically I have a phone without OS and all I can do is accessing custom recovery. I don't have a back up too
I can also see an error log "Cannot mount custom path"
I formatted the memory card to exFAT from exFAT 32 hoping that would work, it didn't help as well.
Also tried to connect phone to pc using USB (thinking I can move rom to system memory), but wouldn't detect phone memory
Now, is there any way to get this fixed? Any help would be awesome
Thanks!!!
kumarj said:
I am a complete newbie to rooting. I followed the kingoroot guidelines and rooted my Idea Aurus 3 phone. Root was success. The next step I did was downloading custom recovery and cyanogenmod ROM from here to my memory card
I flashed the custom recovery with flashify. The next step I did was wiping all data from the device by entering in to recovery mode (including cache and everything)
I was hoping I could simply install zip from sd card. But when i click on this option, I cannot find my sd card nor zip file (I checked most folders including emmc, etc, sd-ext and couldn't find SD card. The custom recovery name is Phylz touch 6
Now basically I have a phone without OS and all I can do is accessing custom recovery. I don't have a back up too
I can also see an error log "Cannot mount custom path"
I formatted the memory card to exFAT from exFAT 32 hoping that would work, it didn't help as well.
Also tried to connect phone to pc using USB (thinking I can move rom to system memory), but wouldn't detect phone memory
Now, is there any way to get this fixed? Any help would be awesome
Thanks!!!
Click to expand...
Click to collapse
Hello,
Please try posting your query in Android Q&A Forum, the experts there maybe able to assist you.
Regards
Vatsal,
Forum Moderator.
Hello All. I’ve run into an issue with my new Moto G4+. I rooted the phone a couple of weeks ago and all was well with that. I downloaded the AOKP rom last Friday and was going to flash it over the weekend. To my surprise, TWRP does no see my external SD card so I can’t do a backup. The internal storage does not have enough space to backup. I have the 16gb model. I can see/use the SD card with no problem when the phone is running. I’ve searched the forums for a solution, but the only thing I’ve found is to format the SD card as internal storage. However, folks seem to be really, really divided on this solution. I really want to flash AOKP, but I need to do a Nandroid backup first. I tried doing an on-line backup with the TWRP app, but it doesn’t provide me with an MD5 for verification. Any help with getting TWRP in recovery mode to see the SD card would be greatly appreciated. TWRP file manager and terminal allow me to see the card (sdcard1 is its name in TWRP recovery), but it does not show up for "select storage" or "mount" options.
Thanks.
Hi there,
Please read the Sticky threads for XDA Assist. Our purpose here is to guide new members to the correct section for their issues. As a Senior Member, you should be able to use the search features provided to you to find the correct section to post your question.
Thanks for understanding.
Thread closed.
Razvan
Forum Moderator