Database Info

Gmail issue?

I have my gmail account linked for pull notifications...
the problem is it will not connect to gmail via wifi rather it olny updates through the 3g data network.
I have checked the advanced settings where the connection type is set to internet but this doesnt change things...
Any suggestions?

make sure you have the wifi connected on and connected to the internet.
also, through the connection tab in settings make sure you have told it that internet connects to wifi,
although, it may be better for you to temporarily disable the data connection whilst you use the wifi if the above doesnt work.

Im for sure connected to my wifi network...
I make the other adjustments...
thanks for the reply!

hi
sometimes wm can be picky like that
why not update over the 3g network?

This comes up becasue I work in the basement of a building with little to no access to cell signal so I can enable wifi and connect but it will not sync wia wifi...

Losing Google Connection on WiFi

At home, when connected to WiFi, I seem to lose the connection to Google, for example for Google Talk. My WiFi connection is strong, but if I leave my phone for 10 minutes, when I turn the screen on the WiFi indicator is white and I have to open Google Talk to get it to then connect.
Wifi policy is set to never sleep. When on regular data connection I have no problem.
I'm on CM RC4 with Netarcy 1.3.2 and I also recently got a new wireless router as an AP for my bedroom, so I wonder if it's to do with settings within that?
Anyone with any ideas?

Old thread, same Problem. Anybody solved this?

Wifi stops working after being left for a while (still connected)

Having an issue with the Tab 2 where you go to pick it up and start browsing after it has been sitting around a while (not sure if the time matters, but it seems like after sitting for most of the day) and the wifi is still connected, but nothing works than needs data. It acts like it would if you had not internet connection. Toggling the wifi off and on will fix the issue and notificaitons and emails start pouring in.
Anyone else have this problem? I found a similar issue on the 7.7 forums but nobody reported a solution and I am not even sure if it would have worked on the Tab 2 anyways. I am thinking about making a script that toggles the wifi automatically if it detects it can't connect to the internet. But that is a little ridiculous needing to do that. It shouldn't be losing connection in the first place.

Hi Pirate
it's a bit depending on the ROM you have installed - but since Android 4 you have a quite reliable setting. The default behavior of Android devices is to deactivate the wifi connection when it goes to sleep.
Some ROMs don't recognize the disconnection and the switch/button still shows "Wifi on" although disconnected.
First step: go to settings / wifi settings, hit the menu button (top right three dots) and check the advanced settings.
Somewhat like "Keep WLAN active in standby" - set this to always.
That should solve it already under android 4.x
If this doesn't help, look into Play Store - search for "wifi keep alive". But for the SGT 2 you shouldn't need it
Greetz - Chris

It was already set to "Always" so I don't think that will help. I will look at that app to see what it does.
Sent from my Nexus 7 using Tapatalk HD

wifi turns off when not in use to save battery. I think it might be a default even if you have it set to always on.

guncrasher said:
wifi turns off when not in use to save battery. I think it might be a default even if you have it set to always on.
Click to expand...
Click to collapse
The problem is that it never comes back on. Well it shows the wifi icon and the signal and everything but it just doesn't have any data connection. Any apps that use data act like wifi is off. The only way to get it to start working again is to toggle wifi or reboot. I also forgot to mention it is the stock ROM, only rooted. It got the OTA a few days ago too and it has happened since then.

You're not alone
Skurvy_Pirate said:
Having an issue with the Tab 2 where you go to pick it up and start browsing after it has been sitting around a while (not sure if the time matters, but it seems like after sitting for most of the day) and the wifi is still connected, but nothing works than needs data. It acts like it would if you had not internet connection. Toggling the wifi off and on will fix the issue and notificaitons and emails start pouring in.
Anyone else have this problem? I found a similar issue on the 7.7 forums but nobody reported a solution and I am not even sure if it would have worked on the Tab 2 anyways. I am thinking about making a script that toggles the wifi automatically if it detects it can't connect to the internet. But that is a little ridiculous needing to do that. It shouldn't be losing connection in the first place.
Click to expand...
Click to collapse
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.

I know this isn't super helpful but I had the same bug you describe on the previous version of carbon. When I updated to the latest it seems to have stopped.
Sent from my GT-p5113 using xda premium

I had similar issue with my aTab Phone 4 and TP-Link TL-WR941ND (OpenWRT)
After disabling WMM capability in the router the problem disappeared!

Change router lease time to "2weeks"
Sent from my GT-I8190N using XDA Premium 4 mobile app

Same issue.
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
Same issue. also using connectify and also tried all things you have described. If you find any solution please let me know.

I had the same problem on my Huawei Honor. You need to set static IP in wifi settings (when connecting to AP, press "show advanced settings").
Mine settings were:
IP adress: 192.168.1.75 (make sure other devices are not connected with this IP)
Gateway: 192.168.1.254 (it could be different. Use the same as you're using to connect to your router)
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4

No option for static IP in connectify
jopsinas said:
I had the same problem on my Huawei Honor. You need to set static IP in wifi settings (when connecting to AP, press "show advanced settings").
Mine settings were:
IP adress: 192.168.1.75 (make sure other devices are not connected with this IP)
Gateway: 192.168.1.254 (it could be different. Use the same as you're using to connect to your router)
Network prefix length: 24
DNS 1: 8.8.8.8
DNS 2: 4.4.4.4
Click to expand...
Click to collapse
There is no option in connectify for static IP and in USB wifi dongle also there is no option to set static IP.

Help!
---

---

Same issue
karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
1. I have had the exact same issue for (atleast) the past 2 years. Have survived by repeatedly turning wifi on and off.
2. I too use connectify. This issue doesnt seem to happen on every wifi connection (just like your case). Even more specifically, it seems to happen ONLY when I connect my phone to the hotspot created via my laptop (connectify).
3. Even when the internet is actually working, some apps do not seem to recognise that(take some time to realize it is working), while others are able to connect instantly. Specifially, whatsapp is unable to send/receive messages for about 1-2 mins, after which I receive a whole bunch of messages at once.
This does not seem to be an issue due to connectify as well. I have tried creating a hotspot from my laptop without using connectify as well, but unfortunately, nothing changed. Further, this does not happen when my phone connects to a hotspot created via connectify by some other pc. The wifi and internet work perfectly fine when connected to a hotspot created via my friends computer.
Further, this problem happens only when a mobile connects to the hotspot. Doesn't occur when another laptop/PC connects (not sure about tablets).
I have looked into every nook and cranny on the internet, explored every forum for any working solution, but have been unsuccessful. In fact, this is the first place where I saw the exact same problem as mine, and was wondering if you have found any solution to it .

karankahlon said:
It's the same effing stuff people suggest to every wifi glitch out there.
To people who think it's due to the wifi sleep policy: although I've set it to always, why would wifi not resume, after screen is turned on? It's not the wifi that gets disconnected, it's the internet (or the download speed) that stops working.
To people who suggest it's a power saving feature under low battery conditions: Sorry, I've tested it while charging and with full battery.
To people with the above two arguments: Connection to some routers works perfect with the phone. Like when I turn on the hotspot on another phone, the wifi works great. Also, wifi on the other phone from the same source (laptop used as internet access point) works well.
To people who suggest resetting the router or wifi on phone: The internet does start working again, but only for a few minutes. Even if the screen is turned on, the internet may stop working mid-download.
The actual situation is that the phone disconnects from the internet, but keeps showing a connection to wifi. Like I used connectify hotspot to create an access point, and after a few minutes, the phone moved from "connected clients" list to the "previously connected clients", even as the phone showed connected to wifi with even the download arrows blinking, but no internet (or download speed). This only happens with certain sources (of wifi). And other phones may work well with the same source.
I have tried (several times and in different orders and permutations) the following to no effect:
1. Resetting the router.
2. Resetting the wifi on laptop.
3. Resetting the wifi on phone.
4. Restarting the phone and laptop.
5. Static IPs, gateways and DNSs. (Even though the problem was not with connecting to wifi and even internet works momentarily after resetting wifi).
6. Turning off items controlling wireless network in wireless connection properties.
7. Turning off firewall.
Waiting for a savior.
Click to expand...
Click to collapse
I'm having the exact same prob on my ZTE Grand x V 970
It started when i had kitkat and i couldnt even "fix it" restarting the wifi, i had to reset the phone in order to have my wifi work for like 2-5 mins and then stops recieving data, tried to reconnect and stays on turning on wifi.. Now i changed to the stock Rom and the problem is still there but at least now i can "fix it" restarting the wifi connection until certain point.

Issue sharing internet with Connectify from PC
Go to:
Control Panel\Network and Internet\Network and Sharing Center
On the left column, click on CHANGE ADAPTER SETTINGS.
You should be in: Control Panel\Network and Internet\Network Connections by now.
Then click on: Microsoft Virtual Miniport Adapter and click on Properties, then click on the 'Configure' button in the 'Networking' tab. From this window, go to the 'Power Management' tab and uncheck 'Allow the computer to turn off this device to save power'.
This works for me. Try this out
If this doesn't work further, you can try out mHotspot for the same purpose.

I've had the same issue, with the wifi saying it's connected even though it isn't.
This thread is 4 years old and this issue still hasn't been fixed. What a shame.

Same issue here on OnePlus 3 even after factory reset.

I have this same problem after the security patch Mid March to Jan 1, 2019. The WIFI doesn't show in the top status bar, but toggling wifi off/on fixes it till the next overnight. I did make one change to my wireless about that same time and that was moving the min connect speed from 6Mbps to 12Mbps to help with bandwidth issues being cause by devices using low speeds and having several SSID broadcast. My S7 and Tab A both work fine - so I think it was something in the security patch.

Whats the value of Wifi on a Gear S3 if you have your phone with you?

I believe the point of having Wifi at all on the gear S3 is so that your phone can continue to talk to your gear via the Samsung account over the internet (assuming both devices are on and connected to the internet over wifi)
Is this the only use case for Wifi being turned on?
Does this scenario only cover alerts, or will it also support calls texts and emails?

scoob101 said:
I believe the point of having Wifi at all on the gear S3 is so that your phone can continue to talk to your gear via the Samsung account over the internet (assuming both devices are on and connected to the internet over wifi)
Is this the only use case for Wifi being turned on?
Does this scenario only cover alerts, or will it also support calls texts and emails?
Click to expand...
Click to collapse
The two devices will talk to each other whether wifi is turned on or off. Wifi comes in handy for apps like Spotify so you don't have to use up your data and apps like Kodi gear where you can control multimedia through your watch .
Sent from my SM-N915T using Tapatalk

scoob101 said:
I believe the point of having Wifi at all on the gear S3 is so that your phone can continue to talk to your gear via the Samsung account over the internet (assuming both devices are on and connected to the internet over wifi)
Click to expand...
Click to collapse
You mean while out of bluetooth range? If so yes, that is one of the usages of wifi.
scoob101 said:
Is this the only use case for Wifi being turned on?
Click to expand...
Click to collapse
No as @MobileUnlockBase pointed out already.
scoob101 said:
Does this scenario only cover alerts, or will it also support calls texts and emails?
Click to expand...
Click to collapse
In Wifi mode you will keep receiving all kind of notifications including text, missing calls etc., but you can't make/receive phone call over wifi. Currently phone call over wifi is not available on this watch.

If you always have your phone with you (by definition this means within BT range) there is no reason to use WiFi. There is nothing that can be done via WiFi that can't be done via BT. But the reverse is not true.

So basically if you have your phone with you at all times, its a complete waste of battery. Turned off. Cheers.

10urshin said:
You mean while out of bluetooth range? If so yes, that is one of the usages of wifi.
No as @MobileUnlockBase pointed out already.
In Wifi mode you will keep receiving all kind of notifications including text, missing calls etc., but you can't make/receive phone call over wifi. Currently phone call over wifi is not available on this watch.
Click to expand...
Click to collapse
.
I'm totally unclear on the purpose of Wifi on this watch! I turned off Bluetooth to use Wifi and it can't connect because the of "sign-in procedure not supported"! Does that mean it can only connect to an open network??? Those really don't exist these days.

Why is there such a big discussion about wifi on this watch? The watch has wifi because Samsung wanted to put it in there and most of us are grateful. Do you want a smart watch without wifi? Again, there are apps like Spotify that it is better to be on wifi instead of GSM, depending on what network you use.
Sent from my SM-N915T using Tapatalk

RaymondPJR said:
.
I'm totally unclear on the purpose of Wifi on this watch! I turned off Bluetooth to use Wifi and it can't connect because the of "sign-in procedure not supported"! Does that mean it can only connect to an open network??? Those really don't exist these days.
Click to expand...
Click to collapse
No it can connect password protected networks, my watch is connected to my home wifi right now, password protected ofc. Try changing encryption protocol(i'm on TKIP+AES) of your access point or try to connect to another access point.

10urshin said:
No it can connect password protected networks, my watch is connected to my home wifi right now, password protected ofc. Try changing encryption protocol(i'm on TKIP+AES) of your access point or try to connect to another access point.
Click to expand...
Click to collapse
Lol, if i turn off password protection on my home network, then my neighbors will start using my Wifi! I can't believe Samsung overlooked this!! I'll just wait for a possible update???

I can confirm that it should connect to a wifi protected network. I use WPA2-PSK and it connects fine to my router.

MobileUnlockBase said:
Why is there such a big discussion about wifi on this watch? The watch has wifi because Samsung wanted to put it in there and most of us are grateful. Do you want a smart watch without wifi? Again, there are apps like Spotify that it is better to be on wifi instead of GSM, depending on what network you use.
Sent from my SM-N915T using Tapatalk
Click to expand...
Click to collapse
The discussion is because people want to understand the uses of their watch. Having it is nice, but there aren't too many use case scenarios for it. Most of the time where WiFi is available, the phone will be close at hand and connected via BT. Streaming music (over WiFi or otherwise) is a very limited application because of the battery drain. If/when moreb Tizen apps are developed for the watch, using WiFi may become practical.

At home i do leave my phone in 1 place, keep my S3 on yes moving around its always BT, but moving further around the house when BT drops the WIFI takes over.
Also once i forgot my phone at home, but when i reached the gym (was registered for their WIFI) i still got my notifications etc.
But all in all no much use, but i left it on as could not discern much battery loss with it being on.

you have to sync the wifi from your phone to the watch then it will just connect.. look on the gear app settings> gear connection > Sync wi-fi profiles..

It's not about giving a use for WiFi all the time. Most of the time WiFi should be off to conserve battery. It is more about the one off scenarios like you forgot your phone at home, but you can connect to WiFi at work and tell your wife you are alive through a text... or for the tizen app developer, to test apps on your watch you need to connect to the watch via wifi... or for spotify.. there are several reasons to have it, but still it should be off Moore often than not

jestexman said:
you have to sync the wifi from your phone to the watch then it will just connect.. look on the gear app settings> gear connection > Sync wi-fi profiles..
Click to expand...
Click to collapse
10urshin said:
No it can connect password protected networks, my watch is connected to my home wifi right now, password protected ofc. Try changing encryption protocol(i'm on TKIP+AES) of your access point or try to connect to another access point.
Click to expand...
Click to collapse
Odd, now it's connecting without doing either of your suggestions!!? Confusing!
Sent from my SM-T377T using XDA-Developers Legacy app

Well GWD needs the watch and PC connected to the same network (wifi) to get the faces from one place to another. Unless you get it into a store maybe, but having it on wifi is handy to test things out as you add them and modify themes.

Just to share my opinion. In my work I’m not allowed to have the phone with me. So the solution to continue receiving my notifications are through WiFi, and it works perfectly.

Streaming music from Spotify on my watch over Wifi.

scoob101 said:
I believe the point of having Wifi at all on the gear S3 is so that your phone can continue to talk to your gear via the Samsung account over the internet (assuming both devices are on and connected to the internet over wifi)
Is this the only use case for Wifi being turned on?
Does this scenario only cover alerts, or will it also support calls texts and emails?
Click to expand...
Click to collapse
WiFi (WiFi Direct) is also used for syncing Images, songs and large apps over to your watch; these would otherwise take lots of time over Bluetooth.

After last update there is no connection via wifi with my phone.. Does someone experienced the same issue?

[Q] WiFi and Bluetooth tethering

Hi,
First, I would Iike to thank you for the creation of this forum and the helpful organisation of it.
Now my two small issues:
I've a Nexus 7 2013 in my car's dashboard. I've connected my phone (for tethering and Make phone calls via tablet) to it via Bluetooth.
Now I've a backup camera that connects via Wi-Fi to my tablet. The problem here is that the camera is not connected to Internet, so my Wi-Fi connection keeps dropping as android don't like to keep connected to connections without internet. Without root, is there any way to solve this? Android asks me if I want to keep connected to this Wi-Fi, even without internet, which I confirm and tick the box to don't ask again, but it keeps asking.
When I manage to connect to Wi-Fi, for some reason I loose Internet connection via Bluetooth, as android seems to give preference to the backup camera Wi-Fi. Is there any way to force the Internet connection via Bluetooth only?
Thank you so much
Andre
Sent from my D6603 using Tapatalk