This is j7108's
is from 5.1.1 but should can use in 6.0.1 as well:
https://mega.nz/#!nNkliAQb!VvopPnS5Zkk15Mhlikaixmg6zWbhyfS_xXe2unSmRqo
Boot Logo =/= Boot animation
Tool you need:
Windows Pc : 7zip, Odin, maybe a linux OS as well
Please note that I'm not responsible if you brick your device, flash back original BL_{firmware version}.tar.md5 to unbrick it
1. You need to get BL_{firmware version}.tar.md5 from your stock firmware, I get from SmartSwitch/Kies which has 4 .tar.md5 files
If your stock firmware consist of only 1, you might can extract it, not entirely sure how. Do share in the comment if you know.
2. You should open BL_{firmware version}.tar.md5 inside linux environment and modify param.bin because the tar contain permission information
Inside param.bin contain Logo.jpg which you can replace it
(rename the param.bin to param.tar so you can open it, after replace the picture, check the permission, tar it, rename it back to param.bin)
Note: The order(cm, sboot then param) and the permission inside the tar is extremely important. Once messed you will brick your phone
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Please share your method how to pack tar on Windows as well. I don't know how to set the permission in windows.
3. Once done repack the 3 files to anynameBL.tar note the .md5 is not needed. If you want to use .tar.md5, Odin need to verify it and it need extra steps
I apologies for lack of linux knowledge, I can't provide comprehensive method. All these steps are simplest possible approach.
We are almost done, now before you flash the Bootloader that you just repack, you need to make sure Frp Lock(if your phone has this feature) is OFF else you will brick your device.
To close Frp Lock, enable Developer Options(google it for step), enable OEM Unlock
Put your device to Odin mode, and you can start flashing
enjoy your new favorite stylish boot logo and turn off OEM Unlock to secure your device back
you write "The order(cm, sboot then param) inside the tar is extremely important" but in the screenshot there is another order.
And in some BL-images which i examined, it is always sboot, param and then cm!
hi
how to edit permission logo after edit file?
windows 32bit
Related
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry, but my English is not very good.
so, sorry if something is not understood.
If the post is not in its right place, please move it.
You are someone who is always trying rom and you have to be changing a recovery to another, or simply you messed with the commands, then this is your tool.
Hello I present, fastboot pitcher that I did and that I use to not have to be getting command, etc.. I install recoverys faster.
1. - Go to bootloader
Taking the phone in usb charge only restart the phone to bootloader.
For this to work the phone must have USB debugging enabled
2. - ClockworkMod
Taking the phone in Bootloader flaseamos the CWM
3. - TWRP
Taking the phone in Bootloader flaseamos the TWRP
4. - Stock
Taking the phone in Bootloader flaseamos the Stock (The recovery of origin)
5.-Out
Leaving
Setup
Once installed, before we start to tell where the famous folder you use to unlock the phone and that is commonly used to flasear.Por default is C: \ android that is where I have.
But how do you set?
Let C: \ Program Files \ Only recoverys and we will find a file called RutaBootloader.cfg, rename it to txt and give it to edit, and there put the folder path when completed it again to rename Cfg and ready .
If you give us permission problems administrator rutabootloader.cfg to copy the desktop, do the whole process and cfg renamed once again had its destination.
Recovery update
The recoverys are updated with the latest version, but if you use another version or an update.
Clockwork -------> recovery-clockwork-5.8.3.1-ville.img
TWRP ------------> OpenRecovery-TWRP-2.2.0-ville.img
simply:
We will:
C: \ Program Files \ Only recoverys \ Recovery
We eliminate the recovery we want to update and replace it with the updated renaming the corresponding name.
For example: If an update of TWRP recovery delete the recovery "Twrp.img" Our new recovery and rename it to "Twrp.img"
For more comfort recoverys.txt edit the file and places the version update to know that we have currently installed recovery.
Download
Note: I am not responsible for any misuse of the application.
It's just a launcher command "fastboot flash recovery XXXXXXX.IMG"
Important: Since I'm doing utiidades, I have never asked a single beer. Because I do it because I like it. But at least you can give the thanks button or comment.
A hug.
Your picture upload failed.
Gesendet von meinem HTC One S mit Tapatalk 2
What pictures is't failed???
Thanks for that!!!
Grettings.
Enviado desde mi Htc One S usando Tapatalk 2
Weak Intro :
Well, I find few people who're curious to change their TWRP splash screen and even the themes. Don't know how to do this weird stuff? You're at the right place! . I know few of them might be bored with staring at the same splash screen for a long time. How about trying something crazy? :silly:.
Prerequisites:
1. Knowledge of how to repack/unpack img. If you don't know how to do this, Just follow this thread by @osm0sis: https://forum.xda-developers.com/showthread.php?t=2073775
2. A TWRP recovery image for our device which can be found here: https://eu.dl.twrp.me/x3/
3. A splash screen image(format in PNG) of your choice.
4. Notepad++ for XML editing. You can get it from here: https://notepad-plus-plus.org/download/v7.5.2.html
5. PATIENCE! :silly:
Procedure:
Ok now that you're happy with the prerequisites, Let's start being crazy!
I assume that you know how to use the Android Image Kitchen by @osm0sis and thereby I'll proceed without any AIK instructions.
Let's start!
1. Extract the TWRP image you wish using the AIK. To do this, Just drag the TWRP image file onto unpackimg.bat file
2. Now you'll find 2 folders.
-> ramdisk
-> spllit_img
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Leave the "split_img" folder aside.(We don't need anything to do with it) and open the "ramdisk" folder.
4. Open the "twres" folder and then right-click on the "splash.xml" file. Then choose Edit with Notepadd++ in the context menu.
5. Scroll down till you find the page XML tag.
6. Now, delete the lines as shown below.
7. Add this line shown below
8. All done! Now you need to get your PNG image of resolution 1920 x 1080(height x width) of your choice.
9. Go to this directory: ramdisk/twres/images. You'll find a file "splashlogo.png". Just Overwrite it with your PNG image and you're done!
10. Finally, you need to pack the modified stuff to make TWRP image. To do this, head onto the AIK folder and then click repackimg.bat. You'll find a a new file in the same folder called "image-new.img". This file is your modified TWRP img. Just flash it and you're good to go.
Credits
1. @osm0sis, for his awesome Android Image Kitchen
2. TWRP, for their trending recovery!
Today I had a problem with FRP protection and tried to bypass it and I did some searching on google and I installed Combination Firmware on the phone and I successfully skipped the protection anyway. I want to create a combination file, but I found that I need two files in an AP file and a sboot.bin in BL but I did not find the sboot.bin file in A705FN and G532F, so is there anyway to resolve this problem ?
A705FN: BL file
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
G532F: BL file
I tried with my S8 G950U1 same problem occured if you know anything how to get sboot file in BL kindly help.
Scorx-Sv1 said:
Today I had a problem with FRP protection and tried to bypass it and I did some searching on google and I installed Combination Firmware on the phone and I successfully skipped the protection anyway. I want to create a combination file, but I found that I need two files in an AP file and a sboot.bin in BL but I did not find the sboot.bin file in A705FN and G532F, so is there anyway to resolve this problem ?
A705FN: BL file
View attachment 5208483
G532F: BL file
View attachment 5208485
Click to expand...
Click to collapse
I had the same problem and struggled to find this same file . And I found the answer ..it was really easy .. download 7zip app and install it. Try opening the same firmware file as you did in WinRAR .It should now show the file you are looking for . WinRAR hides these for some reason is all I can figure . I was unable to find how to enable this in their settings. I tried 7zip just for the hell of it and it just worked. Let me know if this solves your problem . I was able to create my combination file and fix my frp lock on my phone successfully . It's the one I'm on now writing you this message . Good luck . Peace .
Hi guys many of you would have tried to install stock rom root your phone etc and it didn't go well and resulted your phone getting stuck on download mode here's a solution
PRE - REQUSITES
1. ODIN - https://odindownload.com/download/Odin3_v3.14.1.zip
2. Samsung Usb Drivers - https://download2330.mediafire.com/...f1rn/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
3. Frija tool ( For Downloading your phone's Stock Rom ) - https://forum.xda-developers.com/attachments/frija-v1-4-3-zip.5129367/
Now open that frija tool and Enter your phone model number for example my phone is F41 so the model Number is SM-F415F And type your CSC Code and click check Update and dwonload your latest stock rom
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Steps to fix your phone stuck on dwonload mode
1. Extract the fimware of your phone and open ODIN Tool and in CP insert the CP on AP insert AP And Same for all
NOTE - IF u HAVE unlocked your bootloader and you don't want it to get relocked or want your data back select the last one in Odin USERDATA and select HOME CSC OR you want to do a clean wipe and install Your Stock Rom Don't Select the USERDATA
2. Now click on Options and just check weather Auto reboot and F.reset time is only select don't select anything else
3. now click start it might might 5 to 6 minutes and after that it shows Pass on ODIN And your phone will be rebooted Automatically
You can also check this out - HOW TO ROOT Samsung f41 without getting bricked
[HOW TO ROOT] Samsung f41 both one UI2/3
Hey guys, I know that most have doubts on rooting Samsung f41 . let's go step by step This method does not brick your phone [Fully Tested] the only thing is you have to follow all steps properly 1. go to developer settings ( to enable it go...
forum.xda-developers.com
having similar issue but no success until now https://forum.xda-developers.com/t/s20-fe-bootloop-after-security-update.4568331/#post-88383211
My phone battery went off I plugged the charger and it boots me to twrp even though I didn't wish to open it when I press to boot me to system I still end up in twrp window... I also get this noffication
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Au123456 said:
My phone battery went off I plugged the charger and it boots me to twrp even though I didn't wish to open it when I press to boot me to system I still end up in twrp window... I also get this noffication View attachment 5479285
Click to expand...
Click to collapse
Do you want to be able to modify your system partition(including rooting the device) at some point in the future? If so, check the box beside the "never show this screen during boot again" then just swipe the slider at the bottom to allow modifications in the future.
Or
If you do not plan to modify your system partition in any kind of way, tap the "keep read only" button.
This happened to me multiple times, for me it was an error with flashing Treble GSI from google, tho i fixed it by going in fastboot mode/bootloader and on my PC to flash boot, lk, lk2, recovery (official one) and then reboot my phone, but you will delete the TWRP Recovery just so you know.
_________________________________________________________________________________________________________________________
NOTE: I don't know if this will work for you and might brick your device if you don't use correct ROM files...
_________________________________________________________________________________________________________________________
Also if it then boots into Fastboot mode than you can try flashing all files (It will factory reset your phone)
You have to install adb and fastboot on your PC
Commands:
cd *the path to adb and fastboot*
fastboot devices
fastboot flash *what you wanna flash* *filename of the file that you wanna flash*
For Example if you wanna flash boot it will be like ( fastboot flash boot boot.img ) if the filename is with .bin wich most new devices use it will be fastboot flash boot boot.bin
Hope that this helps