Related
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
I have similar problem, can't connect to PC anymore, but flashing with SD card works for me
have you tried different ROM images?
TQY said:
Hi Help me pls,
I've tried to flash my rom via ActiveSync. Every thing went well until i get the progress bar then it got stuck at 0% for ages so i disconnect the whole thing and tried to restart the process.
NOW I CAN'T ACTIVESYNC ANYMORE !!!! but the connection as "memory card reader" still working.
I went through all the post and tried to flash the ROM via bootloader with the "RAPHIMG.nbh" in my SD card ( already formated FAT32 ) but every time the PDA got stuck at the first stage "loading".
HELP ME PLEASE
Click to expand...
Click to collapse
It sounds like you did not carefully read this.
That is also where this should have been posted. A new thread should not be started for this type of issue. I understand you are panicing. However, in almost all situations the phone can be recovered.
That said, Hold volume down and hit the reset button. It will put you in the tricolor screen. In the white it says serial. Connect it to your usb cord. It should now say usb. Now flash the STOCK rom.
be sure that battery over 50% then follow arupphental's
I have a friend with a kaiser and the same problem. can this be applied to it? i dont want to search through the forum forever...
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
X2D said:
I would start by going to the kaiser forums and checking the stickies. Search within the kaiser forum also works.
Click to expand...
Click to collapse
ok i thought someone would say that. was just wondering off hand. thanks x2d
A.creature said:
I have This problem on Vista OS, i connect my touch pro after reboot system, and if i disconnect device and try again connect, my system not see device!
On device manager in OS, my touch pro stay present after disconnect device. This problem retry if after connect i try flash rom on device, black screen on and flashing stop with error connect to device.
Please Help!!!!!
P.S. Sorry my Bad English
Click to expand...
Click to collapse
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
I had the same problem after a faulty ROM from Vodafone NL, what I had to do is before I wanted to flash my ROM do a hard reset on my device (please back-up your personal data before doing this). After the hard reset, I could get a stable connection with activesync and flash my ROM
While the circumstances are different, my advice is still the same: http://forum.xda-developers.com/showthread.php?t=481527
longnguyen30 said:
go to bootloader (tricolor on screen)& flash a rom, your PPC 'll be fine. when you flash ROM, PC transfer data through USB to PPC therefor not need connect by activesync.
Click to expand...
Click to collapse
Stumbled upon this.. and yes the advise is good, when you run the flashing utility (i.e. CustomRUU.exe), it says you need an Active Sync connection, but you really dont, you can flash it anyway, it seems to find the device via USB regardless.
ufff!!!! to me yes found right, thank you thank you to first post. (flashing from SD)
Undetected
Well i had the problem where my phone wasnt getting detected at all.... i put the stock rom and radio but couldnt put stock spl on the phone with sdcard.... after trying different computers/usb wires/settings i returned it for a new one and this one works fine.
hello, i think this forum is my last hope, i have a tablet and i've been searched the correct rom for it, but is not very commun in the market (DOPO), and i am a very noob in this kind of topics, i tried the recovery mode but now shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the no1, it stays there for hours without anything happening, i guess, i only have the choice to flash the tablet with a rom, but i will apreciate if you guys help me how to find the right way to reinstall my android OS,or find the right OS for my tablet. please, help me
My Tablet:
DOPO Double Power
Model: GS-918
9" multitouch display
8GB Memory
Android 4.1.1 Jelly Bean operating system
1.5GHz Amlogic Cortex A9 dual-core processor
1GB system memory
800 x 480 resolution
sdesignz said:
hello, i think this forum is my last hope, i have a tablet and i've been searched the correct rom for it, but is not very commun in the market (DOPO), and i am a very noob in this kind of topics, i tried the recovery mode but now shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the no1, it stays there for hours without anything happening, i guess, i only have the choice to flash the tablet with a rom, but i will apreciate if you guys help me how to find the right way to reinstall my android OS,or find the right OS for my tablet. please, help me
My Tablet:
DOPO Double Power
Model: GS-918
9" multitouch display
8GB Memory
Android 4.1.1 Jelly Bean operating system
1.5GHz Amlogic Cortex A9 dual-core processor
1GB system memory
800 x 480 resolution
Click to expand...
Click to collapse
Download This File
https://docs.google.com/file/d/0B8YnQA1FX-_yUU1ERXh1TjNUbnc/edit?usp=sharing
Click to expand...
Click to collapse
Install Cwm On your tab with mtk droid tools (search for it on the internet)
Boot into recovery mode....
The file you downloaded must be in your sd card....
Select apply update from sd card...
Choose the zip file....
Click yes....
The phone will boot normally....
do everything at your own risk... don't forget to make a backup of your tab with mtkdroid tools..... I am not responsible for any harm caused to your device
Click to expand...
Click to collapse
N'ayam Amarsh'e said:
Download This File
Install Cwm On your tab with mtk droid tools (search for it on the internet)
Boot into recovery mode....
The file you downloaded must be in your sd card....
Select apply update from sd card...
Choose the zip file....
Click yes....
The phone will boot normally....
Click to expand...
Click to collapse
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
EDIT: ok i run the the .zip file named dopo7088stk and this is what it says:
install/sdcard...
finding update package...
opening update package...
verifying update package...
installation aborted.
sdesignz said:
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
Click to expand...
Click to collapse
Mtkdroid tools only works with mediatek devices (with a mediatek chip eg mt6577, mt6589 etc) so will not work with your device
What actually is wrong with your tablet?
sdesignz said:
wow thank you for the quick reply!
i am trying to do the back up to my rom but the MTKdroidTools does not recognize my device when i plug in with the usb cable to the pc
EDIT: ok i run the the .zip file named dopo7088stk and this is what it says:
install/sdcard...
finding update package...
opening update package...
verifying update package...
installation aborted.
Click to expand...
Click to collapse
Sorry Then i can't help... But you can try to do factory reset from CWM REcovery... If this helps then you can boot normally.. If this too doesn't works then you will have to give it to SVC.....
Sorry Then i can't help... But you can try to do factory reset from CWM REcovery... If this helps then you can boot normally.. If this too doesn't works then you will have to give it to SVC.....
Click to expand...
Click to collapse
but to do a cwm recovery i need the tablet drivers isn't it?
and i don't have them :/
oscarblue48 said:
Mtkdroid tools only works with mediatek devices (with a mediatek chip eg mt6577, mt6589 etc) so will not work with your device
What actually is wrong with your tablet?
Click to expand...
Click to collapse
it freezes in the operating system start logo, or shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the 1, it stays there for hours without anything happening. I already tried using the system recovery but it did not work, i tried with diferent roms but nothing :/, i don't have the warranty paper, i guess i'm ****ed :C
sdesignz said:
but to do a cwm recovery i need the tablet drivers isn't it?
and i don't have them :/
it freezes in the operating system start logo, or shows me a box that says: Android is upgrading, Optimizing app 1 of 39, but never pass the 1, it stays there for hours without anything happening. I already tried using the system recovery but it did not work, i tried with diferent roms but nothing :/, i don't have the warranty paper, i guess i'm ****ed :C
Click to expand...
Click to collapse
Can you get into the recovery menu and do factory reset or anything else??
I guess you've tried resetting via the reset button?
There doesn't appear to be a stock rom available for the GS-918 on the Dopo website, have you contacted them to see if they are able to help?
You could try leaving the tablet on when it freezes until the battery runs right down and it turns off, then put it on charge and try it again, not much else I can think of at the moment
oscarblue48 said:
Can you get into the recovery menu and do factory reset or anything else??
I guess you've tried resetting via the reset button?
There doesn't appear to be a stock rom available for the GS-918 on the Dopo website, have you contacted them to see if they are able to help?
You could try leaving the tablet on when it freezes until the battery runs right down and it turns off, then put it on charge and try it again, not much else I can think of at the moment
Click to expand...
Click to collapse
yes i can do everything but it doesn't fix anything :C
and yes, i've tried the ressetting via reset button.
i can swear you there is no dopo GS-918 model drivers or rom in the whole web u.u
I contacted them but they only told me about the recovery menu, and i send them a question but they haven't answered me yet.
((((
now the pc recognizes the tablet via usb, well, it recognized first like vid_1f3a_pid_efe8_driver, then it disappeared and recognized a M3-CHIP driver but with errors (The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver, blabla.)
so i think i need to find the M3-CHIP driver isn't?
EDIT:
I let the battery ran out, and now shows me the box that says: Android is upgrading, Optimizing app 1,2,3,4,5,6,7 of 39, but never pass the 7 now, then i restart the tablet againt, and say: optimizing app 20 of 23, but it freezes,then i restart the tablet... againt, and say: optimizing app 1 of 7, i restart again the tablet, and then it freezes in the first logo forever, the end :C
So, i think one of those last applications is creating the conflict
EDIT 2:
so, now im stuck in the system recovery, i choose reboot system now, and again, i am in System recovery , even if i only press the + volume or -, with the tablet off, it boots automaticly the system recovery :S
sdesignz said:
yes i can do everything but it doesn't fix anything :C
and yes, i've tried the ressetting via reset button.
i can swear you there is no dopo GS-918 model drivers or rom in the whole web u.u
I contacted them but they only told me about the recovery menu, and i send them a question but they haven't answered me yet.
((((
now the pc recognizes the tablet via usb, well, it recognized first like vid_1f3a_pid_efe8_driver, then it disappeared and recognized a M3-CHIP driver but with errors (The drivers for this device are not installed. (Code 28)
There are no compatible drivers for this device.
To find a driver for this device, click Update Driver, blabla.)
so i think i need to find the M3-CHIP driver isn't?
EDIT:
I let the battery ran out, and now shows me the box that says: Android is upgrading, Optimizing app 1,2,3,4,5,6,7 of 39, but never pass the 7 now, then i restart the tablet againt, and say: optimizing app 20 of 23, but it freezes,then i restart the tablet... againt, and say: optimizing app 1 of 7, i restart again the tablet, and then it freezes in the first logo forever, the end :C
So, i think one of those last applications is creating the conflict
EDIT 2:
so, now im stuck in the system recovery, i choose reboot system now, and again, i am in System recovery , even if i only press the + volume or -, with the tablet off, it boots automaticly the system recovery :S
Click to expand...
Click to collapse
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
oscarblue48 said:
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
Click to expand...
Click to collapse
well i contacted the dopo tech support guy , to see if i can do something else, i guess there is no mucho to do now, maybe i could sell the tablet for parts :C
too bad because i just have 4 months with it, at least i learned something about android, do a f ucking backup and enable debugging mode xd
thanks for all your help and the given support .
I apreciate your replies and now i know a litte bit of this kind of topics .
oscarblue48 said:
I think its banjaxed mate, I think your only hope is if the manufacturer is willing to help you, there are no files available anywhere that I can find, the only thing that might have fixed it is a factory reset, and I guess that is not working from your recovery menu?
Is it out of the question to return it to Dopo?
I suppose you could try running the battery right down again, then leaving it for a while and then restarting again, and keep doing that in the hope that it fires up as its supposed to, but to be honest I have my doubts that it will.
Sorry I cant be of any more help.
Click to expand...
Click to collapse
The factory reset on these models (DOPO/nobis/apex) only re-initialize the data/cache partitions it will not touch/fix the system partition.
Based on the gist of the initial post -- the only solution is to send the tablet to the factory so that they can reload the firmware.
I am in the same boat right now...
Originally I had some file system errors on the internal nand (on APEX GS-918) that caused the boot animation to loop endlessly -- because I had 'USB Debugging' enabled' I was able to open a adb shell
and run fsck/e2fsck and fix it.
But I have a similar problem now (possibly due to adding an option in build.prop) and also disabled 'USB Debugging' and
I can no longer use adb to open a shell during the boot logo.
PS: I hate to necro a thread -- but people need to know that the issue, described, is by-design........they want you to send it in the factory.
When doing a factory reset, any respectable stock recovery, should restore the system partition.
PPS: I do not believe you can install and update in the stock recovery that attempts to write to the system partition.
I believe that can only be handled by using various amlogic tools (such as amlogic usb burning tool, which requires the firmware image that we don't have)
Hi guys...
The phone is an BGH Joy Smart A6D (really is a ZTE P172F10 board with MT6572)
I can't enable USB Debugging because when I try it... ¿virus? restarts android
I thought... "I make an hard reset and ready...." but not
The phone ignore "absolutely" the hard reset (with 3 buttons), I can follow the procedure but the phone never erase the data
ok... then... heavy gun
Flash Tool... I replace firmware... dowload ok, etc but... the phone always has the exactly same data
How I can't enable usb debugging (I think) I neither can enter in "fastmode" only sideload
when I try upload throught sideload...
when it uploaded near 85%... it shows error "protocol fault (no status)"
Really I don't know what I must to do.
Can you help me?
damalisani said:
Hi guys...
The phone is an BGH Joy Smart A6D (really is a ZTE P172F10 board with MT6572)
I can't enable USB Debugging because when I try it... ¿virus? restarts android
I thought... "I make an hard reset and ready...." but not
The phone ignore "absolutely" the hard reset (with 3 buttons), I can follow the procedure but the phone never erase the data
ok... then... heavy gun
Flash Tool... I replace firmware... dowload ok, etc but... the phone always has the exactly same data
How I can't enable usb debugging (I think) I neither can enter in "fastmode" only sideload
when I try upload throught sideload...
when it uploaded near 85%... it shows error "protocol fault (no status)"
Really I don't know what I must to do.
Can you help me?
Click to expand...
Click to collapse
Greetings and welcome to assist. I can not find any information at all on your device unfortunately, maybe if you ask in general q&a some one with your device maybe able to help
http://forum.xda-developers.com/android/help
Good Luck
Sawdoctor
Hello guys , I know this phone is unheard of.
I have Philz Recovery running in this phone with CM13.1 Android Marshmallow.
If there is atleast someone in need of a rom for this device , I'll be happy to upload it.
Post Reply to let me know.
Yes please. I want it bro- [email protected]
Please help
akash14darshan said:
Hello guys , I know this phone is unheard of.
I have Philz Recovery running in this phone with CM13.1 Android Marshmallow.
If there is atleast someone in need of a rom for this device , I'll be happy to upload it.
Post Reply to let me know.
Click to expand...
Click to collapse
I have this device and i want to use Lollipop/Marsh mellow in it. Let me know the procedure to update android.
rny.geo said:
I have this device and i want to use Lollipop/Marsh mellow in it. Let me know the procedure to update android.
Click to expand...
Click to collapse
Try rooting your device first.
Use kingoroot pc application and use it to root your device.
After rooting your device, try "Automatic Philz toolkit for MTK" , available in xda
https://forum.xda-developers.com/showthread.php?t=2748169
When u have recovery installed, do contact me, via pm/reply.
I'll guide u further
Bootloop Spice Mi-526n
akash14darshan said:
Try rooting your device first.
Use kingoroot pc application and use it to root your device.
After rooting your device, try "Automatic Philz toolkit for MTK" , available in xda
https://forum.xda-developers.com/showthread.php?t=2748169
When u have recovery installed, do contact me, via pm/reply.
I'll guide u further
Click to expand...
Click to collapse
My brother's phone was given for repairing and the person told that :
The phone contained two Firmwares and not one, and told to proceed to the service centre.
Phone is currently in bootloop and not even charging (tried connecting it via USB to pc and found it disconnecting & connecting).
I want the OS you mentioned and explain the procedure also.
Plz Plz Plz.
My email is : [email protected]
nikhil_destiny said:
My brother's phone was given for repairing and the person told that :
The phone contained two Firmwares and not one, and told to proceed to the service centre.
Phone is currently in bootloop and not even charging (tried connecting it via USB to pc and found it disconnecting & connecting).
I want the OS you mentioned and explain the procedure also.
Plz Plz Plz.
My email is : [email protected]
Click to expand...
Click to collapse
If phone is connecting and disconnecting from charge, it simply means that charging port is loose. Try connecting it in an angle.
Tried connecting it with different angle.
Also when I connect it to pc. It shows USB Device not recognised after I flashed some scatter file and got an error of old file logs.
After that it doesn't boot or charge and also there isn't a bit sign of charger getting heated although it should.
But the same charger works for other phones too.
Any new suggestion is accepted.
nikhil_destiny said:
Tried connecting it with different angle.
Also when I connect it to pc. It shows USB Device not recognised after I flashed some scatter file and got an error of old file logs.
After that it doesn't boot or charge and also there isn't a bit sign of charger getting heated although it should.
But the same charger works for other phones too.
Any new suggestion is accepted.
Click to expand...
Click to collapse
If you cant even flash a new rom, there is nothing I can do. Maybe the emmc is toast. Or maybe the bootloader is corrupt.
Buy a new device and pls dont mess with that phone unless you know what you are doing.
http:$$androidxda.com$flash-stock-rom-using-smart-phone-flash-tool
Replace $ with /
Instructions from this site.
And after extracting the zip file named :
Spice-Mi-526N-IND-Ver4.0
I got the folders named Driver, Firmware & Flash Tool.
And nothing went wrong except the error I got.
nikhil_destiny said:
http:$$androidxda.com$flash-stock-rom-using-smart-phone-flash-tool
Replace $ with /
Instructions from this site.
And after extracting the zip file named :
Spice-Mi-526N-IND-Ver4.0
I got the folders named Driver, Firmware & Flash Tool.
And nothing went wrong except the error I got.
Click to expand...
Click to collapse
If you flashed stock rom itself, you must have done something wrong before that itself.
Tell me the reason you flashed stock over again?
Maybe I'll be able to help
It wasn't me but the repairer from the shop.
The phone used to switch off/hang oftenly.
So my brother took it to the repairer.
After 2 days, he said that the phone had 2 rom instead one as it was given for repair previously also.
That might be the root cause of it.
And the phone was returned with a blue-black-unobvious display of spice logo on it.
Neither charging, constantly booting, and it's not even charging after that scatter file error.
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Did you try msm download tool? If not, nead that thread and good luck
whizeguy said:
Did you try msm download tool? If not, nead that thread and good luck
Click to expand...
Click to collapse
Hi!
Thanks for your reply, but I think you do not read my entire post
As I said, i've already tried at least 8 different versions of msmDownloadTool.
If you have any other suggestion, I'll appreciate.
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
EarthquakeXS said:
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
Click to expand...
Click to collapse
Yes, I am unable to enter into Fastboot Mode.
When I try, the logo saying "fastboot" appears, but after 4 seconds, the systems stucks on CrashDump error screen again.
That way my PC cannot find my phone with ADB or FASTBOOT commands.
The only tool that works is msmDownloadTool, but even with a success run with that tool, my system does not start and stills under CrashDump error.
I was thinking if exists some version of msmDownloadTool that justs restore the fastboot and unlock bootloader with brute force.
Thats my last hope
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
sanaulla jauhar said:
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
Click to expand...
Click to collapse
Hi!
Can you please provide some link to this tool?
Thanks for your help!
mikesmarcos said:
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Click to expand...
Click to collapse
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Hi dude are u here ? i will help u
Try this
Rhach1d237 said:
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Click to expand...
Click to collapse
Source is a videotutorial. google oneplus 6 hardbrick and click the video of Max Lee
(it worked for me)
the download takes an awful lot of time
first get your phone into qualcomm download mode by holding down volume up + power button and plug your device in your PC.
(first unzip the hardbrick zip folder) then the oneplus 6 folder and than the .exe file and click 'start' if it detects your phone.
That is flashing every chip and Hydrogen OS 5.whatever.3 but that is not important. Your phone should boot and than you can install Oxygen OS with android 10(thats the other zip folder) using the local upgrade feature.
(make sure to enable google play services after upgrade from hydrogen OS)
Hope it will work for you too if you haven't tried it already.