[Completed] Very rare issue, possible virus - XDA Assist

Hi guys...
The phone is an BGH Joy Smart A6D (really is a ZTE P172F10 board with MT6572)
I can't enable USB Debugging because when I try it... ¿virus? restarts android
I thought... "I make an hard reset and ready...." but not
The phone ignore "absolutely" the hard reset (with 3 buttons), I can follow the procedure but the phone never erase the data
ok... then... heavy gun
Flash Tool... I replace firmware... dowload ok, etc but... the phone always has the exactly same data
How I can't enable usb debugging (I think) I neither can enter in "fastmode" only sideload
when I try upload throught sideload...
when it uploaded near 85%... it shows error "protocol fault (no status)"
Really I don't know what I must to do.
Can you help me?

damalisani said:
Hi guys...
The phone is an BGH Joy Smart A6D (really is a ZTE P172F10 board with MT6572)
I can't enable USB Debugging because when I try it... ¿virus? restarts android
I thought... "I make an hard reset and ready...." but not
The phone ignore "absolutely" the hard reset (with 3 buttons), I can follow the procedure but the phone never erase the data
ok... then... heavy gun
Flash Tool... I replace firmware... dowload ok, etc but... the phone always has the exactly same data
How I can't enable usb debugging (I think) I neither can enter in "fastmode" only sideload
when I try upload throught sideload...
when it uploaded near 85%... it shows error "protocol fault (no status)"
Really I don't know what I must to do.
Can you help me?
Click to expand...
Click to collapse
Greetings and welcome to assist. I can not find any information at all on your device unfortunately, maybe if you ask in general q&a some one with your device maybe able to help
http://forum.xda-developers.com/android/help
Good Luck
Sawdoctor

Related

[Q] Real HELP NEEDED..Everythings dead

Guys I REALLY NEED your HELP.
Here's What I did..
1. Installed CWM on my NOKIA X
2.Got into Recovery mode(It's Cool actually)
3.Thought of installing minirom kitkat on it..(I had already copied it to my removable sd card.)
4.Went through all the menus,,, did nothing,,, and somewhere I saw advanced,, got into it (I didn't know what I was thinking) I cleared every option that it had including cache, memory,sd card, emmc and also some boot related stuff..
5.All of a sudden I couldn't move the options so I just removed the battery and tried to power it on....(**** Happens)-Phone is not powering on.... no boot no light just A DEAD PHONE.
plz gus I Really NEED HELP. How Can I Solve this Problem.........................................................................................Plz plz plz plz.......:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
I think this is hard brick.(very hard to fix) are you able to open factory mod now? if no then wait for developers to help you to fix hard brick. or if your device showing on pc then you can flash stock rom...
•axe• said:
I think this is hard brick.(very hard to fix) are you able to open factory mod now? if no then wait for developers to help you to fix hard brick. or if your device showing on pc then you can flash stock rom...
Click to expand...
Click to collapse
no my phone's not powering up and i'm not able to open factory mode....... Plz help
Aztile said:
no my phone's not powering up and i'm not able to open factory mode....... Plz help
Click to expand...
Click to collapse
download and open ADB driver installer
is your device showing here? or download and open adb shell and type adb devices
is your device listed here?
if yes then download stock rom for nokia x
and flash is with any flash tool (like odin)
(make sure you have installed your phone to the same pc before means you have drivers)
if your device not showing then contact nokia care (dont tell them your story otherwise your warrenty will over tell them only that your mobile is not turning on )
•axe• said:
download and open ADB driver installer
is your device showing here? or download and open adb shell and type adb devices
is your device listed here?
if yes then download stock rom for nokia x
and flash is with any flash tool (like odin)
(make sure you have installed your phone to the same pc before means you have drivers)
if your device not showing then contact nokia care (dont tell them your story otherwise your warrenty will over tell them only that your mobile is not turning on )
Click to expand...
Click to collapse
Sorry buddy...... Tried it... but no use
All we can do is to refer you to a service center. Sorry.
Moderators, please verify my account. I am sick of the five-minute post wait.
Sent from my XT1022 using the XDA Premium 4 app.
Try this..power the phone off, wait 5 mins, then press and hold power for 60 seconds, and check if you see any signs of the phone coming back to life. If not, then the next option is the service center
that too is not working.................Is there no one inthis whole XDA Universe who can help me..... come on guys there must be someone................:crying::crying::crying:
tech_master said:
Moderators, please verify my account. I am sick of the five-minute post wait.
Click to expand...
Click to collapse
The five-minute post limit is lifted once you have reached 10 posts. The moderators have nothing to do with it, as the process is automated to lift the wait after you post 10 times.
The reason for this wait is to keep new users from rapidly posting uselessly just to achieve 10 posts.
Dude This is crazy
thenookieforlife3 said:
The five-minute post limit is lifted once you have reached 10 posts. The moderators have nothing to do with it, as the process is automated to lift the wait after you post 10 times.
The reason for this wait is to keep new users from rapidly posting uselessly just to achieve 10 posts.
May I have a post thank for helping?
Click to expand...
Click to collapse
Dude this is really crazy....... I thought it was someone trying to help me there and now this............................................ AAAhhhhhhh:crying::crying::crying:
Aztile said:
Dude this is really crazy....... I thought it was someone trying to help me there and now this............................................ AAAhhhhhhh:crying::crying::crying:
Click to expand...
Click to collapse
Oops, sorry to get your hopes up.
I do actually have a few things to say about the real problem here:
1. Are you sure that your device is charged up? If not, make sure to plug it in to charge.
2. If charging isn't the problem, I'm going to give it a safe bet that your device is bricked. Like, turned into nothing more than a brick. (That's what "bricked" actually means ) If the device doesn't respond to the power button (which your posts have led me to believe), then there is no way to revive your device.
aah come on
thenookieforlife3 said:
Oops, sorry to get your hopes up.
I do actually have a few things to say about the real problem here:
1. Are you sure that your device is charged up? If not, make sure to plug it in to charge.
2. If charging isn't the problem, I'm going to give it a safe bet that your device is bricked. Like, turned into nothing more than a brick. (That's what "bricked" actually means ) If the device doesn't respond to the power button (which your posts have led me to believe), then there is no way to revive your device.
Post thank for the real answer?
Click to expand...
Click to collapse
Jesus!!!! Did you just say "NO WAY" come on buddy don't do this to me..................................................... It's like i'm half dead...... there must be some way to unbrick it.........................Come on PLZ plz plz:crying::crying::crying::crying::crying::crying::crying:
aah come on
thenookieforlife3 said:
Oops, sorry to get your hopes up.
I do actually have a few things to say about the real problem here:
1. Are you sure that your device is charged up? If not, make sure to plug it in to charge.
2. If charging isn't the problem, I'm going to give it a safe bet that your device is bricked. Like, turned into nothing more than a brick. (That's what "bricked" actually means ) If the device doesn't respond to the power button (which your posts have led me to believe), then there is no way to revive your device.
Post thank for the real answer?
Click to expand...
Click to collapse
Jesus!!!! Did you just say "NO WAY" come on buddy don't do this to me..................................................... It's like i'm half dead...... there must be some way to unbrick it.........................Come on PLZ plz plz:crying::crying::crying::crying::crying::crying::crying:
Aztile said:
Jesus!!!! Did you just say "NO WAY" come on buddy don't do this to me..................................................... It's like i'm half dead...... there must be some way to unbrick it.........................Come on PLZ plz plz:crying::crying::crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
You said you've cleared eMMC and also some boot related stuff.
Well, messing with your eMMC and boot partition isn't a good idea, if you wiped your entire eMMC partition it means you've also wiped bootloader stuff...
I'm sorry but looks like your phone is totally bricked....
First of all stop shouting...!
Are you sure you choose "advaneced menu" and not "mount and storage" ....?
Also me too I think your device is bricked...
If you can't recognise it from fastboot and adb and you can boot to bootloader and recovery mode it is bricked...
root-expert said:
First of all stop shouting...!
Are you sure you choose "advaneced menu" and not "mount and storage" ....?
Also me too I think your device is bricked...
If you can't recognise it from fastboot and adb and you can boot to bootloader and recovery mode it is bricked...
Click to expand...
Click to collapse
Ooops Sorry.....
Ok I understood..... IT'S BRICKED..........
Well then how to unbrick it
Aztile said:
Ooops Sorry.....
Ok I understood..... IT'S BRICKED..........
Well then how to unbrick it
Click to expand...
Click to collapse
If your phone won't turn on at all, it's totally bricked. Only a motherboard replacement will fix it...
As you know your phone has hard bricked buddy
then you should also know you cant fix it
try odin and flash bootloader (if u can without open download mode)
or Nokia care is the best way...

[HELP]Oneplus One fastboot USB not connected sound!

Hello, I have a big problem with my Oneplus One! I had an buggy rom and I flashed another one but this failed and it was a long time the loading screen (about 15 min), after I tried a full wipe but this bricked the phone.
When I start the phone normaly I just see the Opo logo. I can open the recovery mode and use it (teamwin recovery) and I can start the phone in fastboot mode, I've google & samsung adb triber but when i connect the phone to USB it makes a "not connected" sound
Did somebody had this problem too? Is it a totaly brick ?
I hope some one can help me, I googled this problem and didn't found any useable :/
I'm really sorry for my english, but I hope you can understand it.
Eather said:
Hello, I have a big problem with my Oneplus One! I had an buggy rom and I flashed another one but this failed and it was a long time the loading screen (about 15 min), after I tried a full wipe but this bricked the phone.
When I start the phone normaly I just see the Opo logo. I can open the recovery mode and use it (teamwin recovery) and I can start the phone in fastboot mode, I've google & samsung adb triber but when i connect the phone to USB it makes a "not connected" sound
Did somebody had this problem too? Is it a totaly brick ?
I hope some one can help me, I googled this problem and didn't found any useable :/
I'm really sorry for my english, but I hope you can understand it.
Click to expand...
Click to collapse
its not bricked just follow this to unbrick http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
wilbur2brooks said:
its not bricked just follow this to unbrick http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Click to expand...
Click to collapse
Yea, I wasn't at home and it didn't worked at the computer which I've used.
I fixed it at home, sorry for this thread.
And thank you for the answer

[Completed] Utok D40 XS How to install the firmware again

Hi, i have this wonderfull phone (jk) which has encountered a problem with failed encryption, i don't know how. It tells me to reset phone but nothing works, wipe data+ wipe cache.
I've google the problem but little to now answers about this phone, just a thing on the official website but i've discovered that my micro usb has some problems too, and the software provided by utok is working only like that (tryed 3 cables same effect).
I can't find a rom to flash it with stock recovery so i'm stuck here trying to pack somehow the unpacked version which i have here : LINK
or can i find a compatible one for MediaTek 6572 ?
paradise660 said:
Hi, i have this wonderfull phone (jk) which has encountered a problem with failed encryption, i don't know how. It tells me to reset phone but nothing works, wipe data+ wipe cache.
I've google the problem but little to now answers about this phone, just a thing on the official website but i've discovered that my micro usb has some problems too, and the software provided by utok is working only like that (tryed 3 cables same effect).
I can't find a rom to flash it with stock recovery so i'm stuck here trying to pack somehow the unpacked version which i have here : LINK
or can i find a compatible one for MediaTek 6572 ?
Click to expand...
Click to collapse
Greetings and welcome to asssit. There is very little information on your device and not 100% certain what you are trying to do. I can link you some tools that will unpack an .img file but can you not use adb/fast boot to reset the phone ?
Regards
Sawdoctor
sawdoctor said:
Greetings and welcome to asssit. There is very little information on your device and not 100% certain what you are trying to do. I can link you some tools that will unpack an .img file but can you not use adb/fast boot to reset the phone ?
Regards
Sawdoctor
Click to expand...
Click to collapse
Thanks!
I'll give it a try, also here's some photos with the error itself and when i factory reset he can't mount data.
http://epvpimg.com/4Gecd
http://epvpimg.com/ntwkf
//edit: i've tryed but can't connect my phone to computer succefully, all diferent drivers and tips, i think it has a problem with microusb. On the official website it says that phoe must be turned off and battery removed, then connect it to pc. When i do this it connecting then lose it then again and again. When i connect it started it remains connected but unkow to the Device manager.
Sry bad english, the verbs kills me.
paradise660 said:
Thanks!
I'll give it a try, also here's some photos with the error itself and when i factory reset he can't mount data.
http://epvpimg.com/4Gecd
http://epvpimg.com/ntwkf
//edit: i've tryed but can't connect my phone to computer succefully, all diferent drivers and tips, i think it has a problem with microusb. On the official website it says that phoe must be turned off and battery removed, then connect it to pc. When i do this it connecting then lose it then again and again. When i connect it started it remains connected but unkow to the Device manager.
Sry bad english, the verbs kills me.
Click to expand...
Click to collapse
The only other thing I can suggest is sp flashtools, hopefully this thread may help you
http://forum.xda-developers.com/showthread.php?t=2691299
Good Luck
Sawdoctor

[HELP] Bricked Oneplus 6 - Qualcomm CrashDump - already tried everything

Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Did you try msm download tool? If not, nead that thread and good luck
whizeguy said:
Did you try msm download tool? If not, nead that thread and good luck
Click to expand...
Click to collapse
Hi!
Thanks for your reply, but I think you do not read my entire post
As I said, i've already tried at least 8 different versions of msmDownloadTool.
If you have any other suggestion, I'll appreciate.
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
EarthquakeXS said:
so you can't boot into fastbootmode anymore?
Had the same problem once before and solved it by flashing the correct twrp by fastboot
Click to expand...
Click to collapse
Yes, I am unable to enter into Fastboot Mode.
When I try, the logo saying "fastboot" appears, but after 4 seconds, the systems stucks on CrashDump error screen again.
That way my PC cannot find my phone with ADB or FASTBOOT commands.
The only tool that works is msmDownloadTool, but even with a success run with that tool, my system does not start and stills under CrashDump error.
I was thinking if exists some version of msmDownloadTool that justs restore the fastboot and unlock bootloader with brute force.
Thats my last hope
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
sanaulla jauhar said:
hello. heres what u need to do. download miracle kraked version. hold volume+ and - key simultaneously.
go to device manager in pc. look for port expand it and u should see qualcomm Qloader.
now use miracle under qualcomm tab select patch and flash!!
Click to expand...
Click to collapse
Hi!
Can you please provide some link to this tool?
Thanks for your help!
mikesmarcos said:
Hi everyone!
Well guys, sorry to bring this subject on thread again (because this forum has a lot of guides to solve this problem).
But I'm without hope with my phone at this moment.
Let me tell you guys my sad story...
I have an Oneplus 6 since december 2018, and never, NEVER, tried to use any modification on my phone.
I am from Brazil (so sorry for my bad english =] ), and here we CANNOT use Oneplus Support services (I've tried but only received the response "sorry I cannot help you on your country"), so because of this, I've decided to never apply any modification to avoid problems.
This week after a simple reboot my OP6 started with "Qualcomm CrashDump" error and my despair begins.
I'm not able to enter on Fastboot Mode. When I try, the systems attempt to boot (the fastboot mode logo appears) and fall down into crash again.
I'm not able to enter on Recovery Mode either. This method shows nothing, only black screen and after some time the crash screen comes again.
I do not have Bootloader unlocked too.
Any suggestion to use TWRP via fastboot.exe or ADB are useless, because I cant make the connection. At least I think that is impossible because the 'adb devices' command does not find the device.
I followed a lot of guides from XDA to solve my problem, including the Mega Unbrick Thread.
I already downloaded at least 8 different versions of msmdownloadtool in consecutive attempts of unbrick my phone. Nothing really helps.
The most weird situation is that msmDownlodTool can finish the proccess with success. The driver installation is working... everything seens OK using the tool but my phone does not revive
Someone have a suggestion for me?
Any suggestion, tool or alternative method is welcome in my actual situation.
Sorry if I posted at wrong local, just tell me and I can fix if necessary.
Thanks in advance to all of you guys.
Click to expand...
Click to collapse
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Hi dude are u here ? i will help u
Try this
Rhach1d237 said:
Hi there ! I am experiencing a similar issue on the same device. Did you manage to fix it ?
Click to expand...
Click to collapse
Source is a videotutorial. google oneplus 6 hardbrick and click the video of Max Lee
(it worked for me)
the download takes an awful lot of time
first get your phone into qualcomm download mode by holding down volume up + power button and plug your device in your PC.
(first unzip the hardbrick zip folder) then the oneplus 6 folder and than the .exe file and click 'start' if it detects your phone.
That is flashing every chip and Hydrogen OS 5.whatever.3 but that is not important. Your phone should boot and than you can install Oxygen OS with android 10(thats the other zip folder) using the local upgrade feature.
(make sure to enable google play services after upgrade from hydrogen OS)
Hope it will work for you too if you haven't tried it already.

Question Rog Phone 5 Brick

Hello to all,
I apologize in advance for this message.
I mistakenly bricked my phone,
It was running WW-18.0840.2201.226 (Android 11).
I'm not sure if I'm going to be able to use it again, but I'm sure I'll be able to use it again in the future.
The recovery mode does not work anymore. It remains stuck on the logo.
Concerning the device manager :
In Bootloader, nothing is detected
When I test the recovery mode, it detects 'Android Composite ADB interface'.
However, the ADB commands do not work (Unauthaurized)
This is a call for help, I don't know which tutorial to look at to help me.
Do I need to get a Deep Flash Cable to restore the phone?
Excuse my English, I'm French ^^'
Hi, I'm not sure, but I think you will have to delete this POST... It doesn't respect the forum rules... That said, you can follow this link for your problem. https://forum.xda-developers.com/t/...to-unlock-bootloader-to-modify-country-cn-to- ww.4353865/não lido
Hi Rico,
If I have to delete the post I will do it, it's not a problem.
Do you think I can put this post in the topic you gave me?
I had come across it in my research but I didn't know if it needed a Deep Flash Cable
I didn't know that my problem was similar to the one in the post because I don't have a 9008 mode
B.
Balmyr said:
Hi Rico,
If I have to delete the post I will do it, it's not a problem.
Do you think I can put this post in the topic you gave me?
I had come across it in my research but I didn't know if it needed a Deep Flash Cable
I didn't know that my problem was similar to the one in the post because I don't have a 9008 mode
B.
Click to expand...
Click to collapse
There is nothing wrong with your post at all.
Do you have access to see and send Fastboot commands to the phone when on the bootloader screen? You need to get that right first and get your driver on your PC sorted. Forget ADB, that's not going to help you here.
Once you have sorted the above, doing a RAW flash following one of the guides you can find on this form with a rom version that matches your device should get you back on track.
At this stage you shouldn't need EDL or a deep flash cable before exploring the above option.
Good luck.
Hello Andrologic,
Thanks for your reply
I only have access to the Bootloader with 'Start / Restart Bootloader / Recovery Mode / Power Off'.
I bought a Deep Cable, this one detects me when I connect it to the pc, previously my other cables did not want it
So I can indeed use the Fastboot commands whereas before I couldn't
Andrologic said:
There is nothing wrong with your post at all.
Do you have access to see and send Fastboot commands to the phone when on the bootloader screen? You need to get that right first and get your driver on your PC sorted. Forget ADB, that's not going to help you here.
Once you have sorted the above, doing a RAW flash following one of the guides you can find on this form with a rom version that matches your device should get you back on track.
At this stage you shouldn't need EDL or a deep flash cable before exploring the above option.
Good luck.
Click to expand...
Click to collapse
Thank you very much Andrologic!
The phone works like magic again, I can't believe it T_T
When I should do the updates, should I reflash the phone?
It doesn't offer me any new ones even though I'm on Android 11
B.
Balmyr said:
Thank you very much Andrologic!
The phone works like magic again, I can't believe it T_T
When I should do the updates, should I reflash the phone?
It doesn't offer me any new ones even though I'm on Android 11
B.
Click to expand...
Click to collapse
Nice. No, I would suggest updating the conventional way, i.e download ROM for ASUS and let the device pick it up and flash it. If you have TWRP installed, you can flash from there too, but there is no need for that unless the first method is not working

Categories

Resources