Related
Here are all the current KDZ files for flashing Your LG V10 Back to Stock!
Will Be adding Firmwares as I get them, Give me a little time to fix up the guide a little as it WILL be the SAME method as the G2 and G Pro, G Flex, Etc. KDZ's & TOT's HERE
NOTICE! - IF you download fails or does not download all the way USE A DOWNLOAD MANAGER!, Files that are usually over 1GB browsers have issues downloading them especially if you have a slow connection.
First Off Not Responsible if you flash the wrong one!!!!
_____________________________________________________________________________________________________________________________
LGUP Method flashes both KDZ & TOT files:
Thanks to @shakeyabooti for LGUP!
Download LGUP from HERE
Install the file with the DLL name in them first and then LGUP_Install_Ver_1_14_3 Then copy the folder "common" to C:\Program Files (x86)\LG Electronics\LGUP\model (this should resolve unknown error)
Make sure you have downloaded the required KDZ file MM or LP
Open LGUP on your computer "make sure your phone is plugged in"
ARE YOU HAVING TROUBLE WITH LGUP NOT SEEING YOUR MOBILE?
Try this....... take the back off your mobile so you can get at the battery. Connect your mobile via USB. Start LGUP, if it does not see your phone DO NOT DISCONNECT, DO NOT RESTART OR TURN OFF LGUP. Take out the battery and then put it back in.......let the phone restart on its own. LGUP should now see it.
LG Drivers: All Others - HERE Verizon - HERE
TO DO A FULL WIPE AND INSTALL MM - Open the LGUP on your computer. FILE PATH point it towards the MM KDZ.
IMPORTANT!!!!!!! shut down LGUP!
Now open LGUP again - you will notice that the MM KDZ will still be showing in the FILE PATH section. Select REFURBISH and make sure BIN file is ticked. Press Start. Make cup of tea and be patient
TO GO BACK TO LP FROM MM - Open LGUP on your computer, click on FILE PATH and point it towards your LP KDZ. Close LGUP and re-open LGUP. Make sure you select REFURBISH this will do a FULL wipe, tick BIN file. Press Start. Make cup of tea and be patient
Video Guide: (Thanks to @KiaTheKing
https://www.youtube.com/watch?v=iPKcuYwDoxY
_________________________________________________________________________________________________________________________________________________________________
How to flash ROM KDZ Method
The Files are Hosted on my server for fast speeds! Most if not all NEEDED KDZ files are on my Server
How to flash ROM KDZ Method
First off I`d like to THANK @quangnhut123 for making a new way & easy way to flash the KDZ Method!!
1). Download all The Files Below!
1) Firmware Files - HERE!
2) Download LG Drivers - LG Drivers Here - 10.9 Mb
2.1)Verizon Drivers (Verizon Only)LG_VZW_United_v2.22.0.exe - 7.8 Mb
3) Download LG Flash Tool 2014 tool and extract - LG_Flash_Tool_2014.zip - 3.1 Mb
4) Enter to Download Mode and plug USB into your PC
5) Run LGFlashTool2014.exe and do as following pictures :
(If you cannot run LGFlashTool2014.exe, please install Visual C++ Runtime Library) - Download HERE
Normal Flash: Flash ROM without losing any data. Only use this when you need to fix system error. Beware of boot loop when flashing ROM that differ from current ROM on your phone or MOD ROM.
CSE Flash: Choose this option when you need a fresh format. All data will be gone. It's suitable for upgrading or downgrading ROM or simply use this when you need to back to Stock.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
No need to choose desired language, it automatically change to English as a default setting.
Wait until 100% to complete !
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
_______________________________________________________________________________________________________________________________
2015 (updated with pictures) TOT Method!
RETURN TO STOCK TOT METHOD!, AT&T, T-Mobile, Sprint, Verizon, & a The few International TOT`s that are available
How to Flash YouTube Video:
1. Download Everything!
1.1) Download Both Stock Image & DLL File – Download Here
1.2) Download LG FlashTools V1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
1.3) Download Drivers (Any LG Phone) - Here (Verizon Only) – Here
1.4) Megalock DLL File - Megalock.dll Download
Install:
2. Install LG Drviers
3. Install Flashtool (Don’t run it yet)
4. Extract the TOT file from the Zip
5. Copy MegaLock.dll file to C:\LG\LGFlashtool (This might be a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file)
6. Power off your Device & or pull battery (G3),(G Pro),(G Flex)
7. Press and hold the Vol UP Key and plug in the USB cable to your phone you should now see “Firmware Update/Download Mode” and be in Download mode.
8. Open up Device Manger on your PC
8.1) Click on ports and double click LGEModem
8.2) Go to Port Settings Tab and click Advanced
8.3) Change COM Port to COM41 and click Okay.
8.4) After this you may need to rereboot your phone back into download mode.
9. Run LG Flashtool as Administrator
10. Select Manual Mode at the top
11. Click The DLL Box and choose the DLL file from Above meant for your device
12. Click the S/W box and select the firmware file with the .tot extension, Then Click OK when done.
13. Now Click the Yellow Arrow Button at the top left, The Firmware install will be triggered
14. You may need to unplug/replug phone before Firmware install will start (If it does nothing after clicking the yellow button
15. Should take anywhere between 4-8 Minutes, When its done your phone should reboot
16. LG G3 Only, After reboot you will be presented with a Factory reset screen, Just pull battery and put it back in and it should boot right up!
Do NOT Close the FlashTool Window during firmware update.
99% of the time FlashTool will FAIL after 85% anything after 85% is just your phone rebooting so your safe
_______________________________________________________________________________________________________________________________
2014 TOT Method (Old/Outdated)
RETURN TO STOCK TOT Method! AT&T & Sprint Verzion & The Few International TOTs I have available Also T-Mobile Can be Flashed back this way if you are having issues!
Download
1. Download Both Stock Image File & DLL file - Download
2. LGFlashTools v1.8 - Setup_LGFlashTool_1.8.1.1023.exe - 9.3 Mb
3).Download Drivers (ANY LG Phone)- LGUnitedMobileDriverVer_3.8.1.exe - 10.6 Mb
3.2) Download Drivers (Verizon Only) - LG_VZW_United_WHQL_v2.11.1.exe - 7.8 Mb
4.Megalock DLL File: Megalock.dll Download
Credit to @madmack for making most of this Guide for the G Pro Which also works on our G2!
Install:
1. Install the LG drivers downloaded above.
2. Install LGFlashTools v1.8 (but don't run it)
3. Extract the TOT file from the ZIP
When LG Flash Tool is installed, do not launch it.
7) Copy MegaLock.dll to C:\LG\LGFlashTool, This is a hidden folder so enable "hidden folders". Replace the old MegaLock.dll file if you have already installed LG Flash Tool on your computer.
8) When the firmware is downloaded, boot your LG G2 into Download Mode. To do this, press and hold the Volume Up key and then plug the USB cable.
9) Launch LG Flash Tool.
You might see a window with Korean language, just click on OK.
Check the Select Manual Mode on the top.
10) MAKE SURE UNDER, DEVICE MANAGER, YOUR PORT IS SET TO COM 41 FOR YOUR DEVICE.
11) Click the DLL box and choose the dll file from above for you phone model.
12) Click the S/W box and select the firmware file with .tot extension.(the 2.04 gb file from above)
13) Now click the Yellow arrow button on the top left of the main window.
The firmware installation will be triggered.
Ignore if you see any temporary error and just wait patiently till it is finished.
Do not close the Flash Tool window.
14) Press and hold power button until phone turns off, leaving usb cable connected to device AND computer ,immediately hold volume up button until phone boots it into Download Mode.
Your LG G2 will restart showing firmware installation progress in percent (%).
When all is done, reboot your phone and enjoy!
Credit [email protected] for making a cleaner guide for the TOT Method
Click to expand...
Click to collapse
_______________________________________________________________________________________________________________________________
Remember if you have bootloop or stuck on LG Logo after flashing make sure you FACTORY RESET!
Extra Important Info:
To Fix ANY Driver issues make sure you reboot your computer after removing and then re-install again, Also try different USB ports or USB cable or try another PC.
Also try this for any driver issues: http://forum.xda-developers.com/showpost.php?p=53313255&postcount=5400
REMEMBER if you get Bootlooping after flashing perform a factory hard reset!
Instructions Here: https://support.t-mobile.com/docs/DOC-7590
My Links are ALWAYS hosted on MY servers for NO Downtime! If My site does NOT have what your looking for PM me or post what you want and I will try and get it for you
Feel Free to support me by helping with Server Costs, Late night Beer, and Coffee if you feel my work has helped you Thank you!
Thank you so much!
Donations: @avinash Rajkumar, @penone1130, @nilesd
Thread now opened!
hyelton said:
Thread now opened!
Click to expand...
Click to collapse
You mean you found the firmware files for the H901?
NYLimited said:
You mean you found the firmware files for the H901?
Click to expand...
Click to collapse
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
hyelton said:
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Hi,
I bought my V10 at expansys australia, and the version is H961N Dual Sim,
but the software version is v10b-SEA-XX instead of v10b-HKG_XX, I believe it is a singapore version.
Any one has the v10b-SEA-XX kdz file?
or
Is that compatible to flash v10c-HKG-XX on my Singapore version of V10???
These .KDZ files look to come from the LG site although I have not been able to verify them or test flashing them yet.
http://forum.xda-developers.com/showthread.php?p=65742064
[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method
burnsky05 said:
These .KDZ files look to come from the LG site although I have not been able to verify them or test flashing them yet.
http://forum.xda-developers.com/showthread.php?p=65742064
Click to expand...
Click to collapse
All my kdz files come from LGs site that are on all my guides. I also have KDZs that are no longer available as well for other models.
Sent from my iPhone using Tapatalk
Maybe some more updated .KDZ files being release
http://forum.xda-developers.com/showthread.php?p=65768787
burnsky05 said:
Maybe some more updated .KDZ files being release
http://forum.xda-developers.com/showthread.php?p=65768787
Click to expand...
Click to collapse
Thanks, I've been keeping watching and uploading as I get them !
hyelton said:
Not for that one yet. :/. Just some other models
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
I don't understand.. This thread is, according to the title, for LG v10...
NYLimited said:
I don't understand.. This thread is, according to the title, for LG v10...
Click to expand...
Click to collapse
Yes, Remember there are close to 10 different models for the V10. There are more than just the T-Mobile H901 V10
Hey guys what's the odds on the Verizon v10 getting at least root?
Sent from my VS990 using Tapatalk
mwebb34 said:
Hey guys what's the odds on the Verizon v10 getting at least root?
Sent from my VS990 using Tapatalk
Click to expand...
Click to collapse
Go to this thread
http://forum.xda-developers.com/showthread.php?t=3244237
Thanks
Sent from my VS990 using Tapatalk
Is it possible to install a different kdz on an identical spec phone?
I have h960a, can I install the new Turkish mm 6.0 kdz?
Keep in mind that Tr version is 64gb.
Is there kdz for H960A 32gb ?
Is this confirmed working for the VS990?
hi folks,
i ve been trying the kdz for my f660k, everything goes fine, except after the location and language window, it check phone settings, and after i get a message saying it cannot connect to the server, and nothing get installed on the phone.
any work around?
if you have a tip for help i would appreciate.
thxx a lot
[Guide] LG V10 Stock Firmware (Go Back to Stock) KDZ & TOT Method
nocomp said:
hi folks,
i ve been trying the kdz for my f660k, everything goes fine, except after the location and language window, it check phone settings, and after i get a message saying it cannot connect to the server, and nothing get installed on the phone.
any work around?
if you have a tip for help i would appreciate.
thxx a lot
Click to expand...
Click to collapse
Did you drag that window over?? That's normal. That message is supposed to come up.. In most cases when you drag it over you'll see it's actually flashing. It says that because there's not as it's not needed. But you should be using LGUP not the older flash tool
Sent from my iPhone using Tapatalk
ZUK ZUI Marshmallow version (2.3) link https://mega.nz/#!fYpwFRCT!RyQrvcXGVR5z9GokqgUc-pRbSdgK8uSUoiwmPorIwe8
stock ROM for Lenovo ZUK Z1 - Android 5.1.1 (Official Version:ZUI) Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729
This is ZUK Z1 zui version which is Chinese and you can change the language to English after the flash
Hey Guyzzz...
Last week i'm searching how to flash ZUK z1 zui version finally got some idea how to do that. so here i'm just posting my experience maybe it will hep for others as well. This is the first time I'm posting some thread related to mobile so obviously there should be some mistakes in typing and explaining. first of all i do apology for that.
Download the Full ROM file from here and extract to your computer. Here is the link https://mega.nz/#!fYpwFRCT!RyQrvcXGV...uSUoiwmPorIwe8
1. You need to install Qualcomm driver and ZUK Z1 driver to you PC, you can download it from this link https://mega.nz/#!7ZpXUSSK!Rx8IptfmNcu_5TORmR7Z2egWOJbDV8l_0gE3E5aevNY
2. The Qualcomm driver file shouldn't be signed so most of the windows operating system will not allow you to install, to install the Qualcomm driver you need to enable the unsigned driver installation.
If you are using windows 10 or windows 8. or 8.1 you can enable in this way. (go to the power option from the start menu hold the shift key from the keyboard and select restart option) for more information you can see this link http://www.howtogeek.com/167723/how-...igned-drivers/
If you are using windows 7 you can disable the driver signature verification from the boot menu. (when you see your computer motherboard name or pc logo just type F8 so there you can choose the option disable driver verification)
3. If you install the driver files successfully then you need to download and install the QFIL tool you can download the file from this link https://mega.nz/#!jYQh0bzS!Uvg2hqXOQ8Q2pyKBT6PkL8v4rRbde3l__ZXpY9yKMKs
open the QFIL tool you can see on the top "no port available" then just power off you mobile volume up key hold connect the usb cable to the computer then you can see the QFILL too will detect the driver the name like "Qualcomm HS-USB QDloader 9008 (COM4)" now the driver installation has completed.
Attachment 3573534
(Note the driver file will stay maximum 5 seconds before that you need to press the download key)
Then browse programmer path select the "prog_emmc_firehose_8974.mbn" file then load XML file "rawprogram0.xml" and "patch0.xml" now you can select the download key.
Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729 _qpst.rar file which is extracted earlier all files you will get it from the ROM folder.
if it's finished then your mobile will be restart automatically.
NOTE:- You will get new update but don't update it now install the recovery and flash the gapps file other wise if you updated to the newer version which is 1.2.0.40 then it's not easy to flash the recovery.
If you have any doubt please leave the comment. Be careful if you brick the mobile i will not responsible so if you have any doubt before you proceed please ask.
Ramshu97 said:
Stock ROM for Lenovo ZUK Z1 - Android 5.1.1 (Official Version:ZUI) Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729
This is ZUK Z1 zui version which is Chinese and you can change the language to English after the flash
Hey Guyzzz...
Last week i'm searching how to flash ZUK z1 zui version finally got some idea how to do that. so here i'm just posting my experience maybe it will hep for others as well. This is the first time I'm posting some thread related to mobile so obviously there should be some mistakes in typing and explaining. first of all i do apology for that.
Download the Full ROM file from here and extract to your computer. Here is the link https://mega.nz/#!rYgB2QpK!r2raxb6-Ms-Zz1MIiSw3MJJBozWNoFc-DXbb3U4YAMA
1. You need to install Qualcomm driver and ZUK Z1 driver to you PC, you can download it from this link https://mega.nz/#F!LcgDmRyC!4unf8UQqOBoZayAuv-D3Tg
2. The Qualcomm driver file shouldn't be signed so most of the windows operating system will not allow you to install, to install the Qualcomm driver you need to enable the unsigned driver installation.
If you are using windows 10 or windows 8. or 8.1 you can enable in this way. (go to the power option from the start menu hold the shift key from the keyboard and select restart option) for more information you can see this link http://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/
If you are using windows 7 you can disable the driver signature verification from the boot menu. (when you see your computer motherboard name or pc logo just type F8 so there you can choose the option disable driver verification)
3. If you install the driver files successfully then you need to download and install the QFIL tool you can download the file from this link https://mega.nz/#!qIx0ybKC!YfeWZMHTF6WoNhI2DeJxIps93gK2v8rEqDr5rEOYUc4
open the QFIL tool you can see on the top "no port available" then just power off you mobile volume up key hold connect the usb cable to the computer then you can see the QFILL too will detect the driver the name like "Qualcomm HS-USB QDloader 9008 (COM4)" now the driver installation has completed.
View attachment 3573534
(Note the driver file will stay maximum 5 seconds before that you need to press the download key)
Then browse programmer path select the "prog_emmc_firehose_8974.mbn" file then load XML file "rawprogram0.xml" and "patch0.xml" now you can select the download key.
Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729_qpst.rar file which is extracted earlier all files you will get it from the ROM folder.
if it's finished then your mobile will be restart automatically.
NOTE:- You will get new update but don't update it now install the recovery and flash the gapps file other wise if you updated to the newer version which is 1.2.0.40 then it's not easy to flash the recovery.
If you have any doubt please leave the comment. Be careful if you brick the mobile i will not responsible so if you have any doubt before you proceed please ask.
Click to expand...
Click to collapse
can you take videos n share the links,
( this where will get it, and pls explain in better way Then browse programmer path select the "prog_emmc_firehose_8974.mbn" file then load XML file "rawprogram0.xml" and "patch0.xml" now you can select the download key.)
[email protected] said:
can you take videos n share the links,
( this where will get it, and pls explain in better way Then browse programmer path select the "prog_emmc_firehose_8974.mbn" file then load XML file "rawprogram0.xml" and "patch0.xml" now you can select the download key.)
Click to expand...
Click to collapse
@[email protected] Please check the below link it's not ZUK Z1 flashing but it's the same method just read the article.
https://boycracked.wordpress.com/2015/06/03/unbrick-lenovo-a6000/
Where exactly to obtain these files?
"prog_emmc_firehose_8974.mbn", "rawprogram0.xml" and "patch0.xml"
I don't see them included in the files with tools that you listed.
ferbulous said:
Where exactly to obtain these files?
"prog_emmc_firehose_8974.mbn", "rawprogram0.xml" and "patch0.xml"
I don't see them included in the files with tools that you listed.
Click to expand...
Click to collapse
It's not with tool, it's with the ROM file download the ROM from this link https://mega.nz/#!rYgB2QpK!r2raxb6-Ms-Zz1MIiSw3MJJBozWNoFc-DXbb3U4YAMA
and extract with winrar then you can see those files
Ramshu97 said:
It's not with tool, it's with the ROM file download the ROM from this link https://mega.nz/#!rYgB2QpK!r2raxb6-Ms-Zz1MIiSw3MJJBozWNoFc-DXbb3U4YAMA
and extract with winrar then you can see those files
Click to expand...
Click to collapse
Oh man, I didn't notice that
Thanks, that was bugging me the whole time where to get those files
hello where is the softwere toflash
lior1262 said:
hello where is the softwere toflash
Click to expand...
Click to collapse
Read the form properly
Marshmallow ZUI version is coming soon..... Just started uploading.
Official ZUI marshmallow version you can download from below link.
https://mega.nz/#!fYYh0QDA!nYf0vvXpzyl5q5t-8-cZQWENbYoIN__vaHO_Weyg-YU
Marshmallow screenies
Thanks Ramshu,
Can you post some screenshots in case you're running this version,
Any new features worth mentioning?
Thanks
Nickthegr8 said:
Thanks Ramshu,
Can you post some screenshots in case you're running this version,
Any new features worth mentioning?
Thanks
Click to expand...
Click to collapse
Currently i'm not using this version, i'm testing with other custom ROMS like CM13 unofficial if you want to know the details about ZUI please followup with below link.
http://bbs.zuk.cn/z1/t56977/
ZUI 1.6.225 (Android 6 Marshmallow) Stable flashable ZIP for TWRP
DOWNLOAD ROM Provided by Tymoon @ 4PDA.ru Forum
Included:
Unlocked Bootloader
SuperSU
Gapps:
DOWNLOAD GAPPS
Use morelocal 2 to change apps to your language
Best Rom for me... So much better than cm
Happy flashing
Thanks for the sharing, will check the version.
Raphi86 said:
ZUI 1.6.225 (Android 6 Marshmallow) Stable flashable ZIP for TWRP
DOWNLOAD ROM Provided by Tymoon @ 4PDA.ru Forum
Included:
Unlocked Bootloader
SuperSU
Gapps:
DOWNLOAD GAPPS
Use morelocal 2 to change apps to your language
Best Rom for me... So much better than cm
Happy flashing
Click to expand...
Click to collapse
Thanks for sharing
Raphi86 said:
ZUI 1.6.225 (Android 6 Marshmallow) Stable flashable ZIP for TWRP
DOWNLOAD ROM Provided by Tymoon @ 4PDA.ru Forum
Included:
Unlocked Bootloader
SuperSU
Gapps:
DOWNLOAD GAPPS
Use morelocal 2 to change apps to your language
Best Rom for me... So much better than cm
Happy flashing
Click to expand...
Click to collapse
Thank you! How is it going to work in the future for updates?
Ramshu97 said:
ZUK ZUI Marshmallow version link https://mega.nz/#!fYYh0QDA!nYf0vvXpzyl5q5t-8-cZQWENbYoIN__vaHO_Weyg-YU
stock ROM for Lenovo ZUK Z1 - Android 5.1.1 (Official Version:ZUI) Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729
This is ZUK Z1 zui version which is Chinese and you can change the language to English after the flash
Hey Guyzzz...
Last week i'm searching how to flash ZUK z1 zui version finally got some idea how to do that. so here i'm just posting my experience maybe it will hep for others as well. This is the first time I'm posting some thread related to mobile so obviously there should be some mistakes in typing and explaining. first of all i do apology for that.
Download the Full ROM file from here and extract to your computer. Here is the link https://mega.nz/#!rYgB2QpK!r2raxb6-M...Fc-DXbb3U4YAMA
1. You need to install Qualcomm driver and ZUK Z1 driver to you PC, you can download it from this link https://mega.nz/#F!LcgDmRyC!4unf8UQqOBoZayAuv-D3Tg
2. The Qualcomm driver file shouldn't be signed so most of the windows operating system will not allow you to install, to install the Qualcomm driver you need to enable the unsigned driver installation.
If you are using windows 10 or windows 8. or 8.1 you can enable in this way. (go to the power option from the start menu hold the shift key from the keyboard and select restart option) for more information you can see this link http://www.howtogeek.com/167723/how-...igned-drivers/
If you are using windows 7 you can disable the driver signature verification from the boot menu. (when you see your computer motherboard name or pc logo just type F8 so there you can choose the option disable driver verification)
3. If you install the driver files successfully then you need to download and install the QFIL tool you can download the file from this link https://mega.nz/#!qIx0ybKC!YfeWZMHTF...8rEqDr5rEOYUc4
open the QFIL tool you can see on the top "no port available" then just power off you mobile volume up key hold connect the usb cable to the computer then you can see the QFILL too will detect the driver the name like "Qualcomm HS-USB QDloader 9008 (COM4)" now the driver installation has completed.
Attachment 3573534
(Note the driver file will stay maximum 5 seconds before that you need to press the download key)
Then browse programmer path select the "prog_emmc_firehose_8974.mbn" file then load XML file "rawprogram0.xml" and "patch0.xml" now you can select the download key.
Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729 _qpst.rar file which is extracted earlier all files you will get it from the ROM folder.
if it's finished then your mobile will be restart automatically.
NOTE:- You will get new update but don't update it now install the recovery and flash the gapps file other wise if you updated to the newer version which is 1.2.0.40 then it's not easy to flash the recovery.
If you have any doubt please leave the comment. Be careful if you brick the mobile i will not responsible so if you have any doubt before you proceed please ask.
Click to expand...
Click to collapse
Password for "ZUK_Z1_1.5.215_M_ST_160105_Modifyed.zip" ?
Raphi86 said:
ZUI 1.6.225 (Android 6 Marshmallow) Stable flashable ZIP for TWRP
DOWNLOAD ROM Provided by Tymoon @ 4PDA.ru Forum
Included:
Unlocked Bootloader
SuperSU
Gapps:
DOWNLOAD GAPPS
Use morelocal 2 to change apps to your language
Best Rom for me... So much better than cm
Happy flashing
Click to expand...
Click to collapse
Can it be flashed with Breadcrust's twrp update 5 and can gapps be flashed back to back after flashing rom or do we need to reboot after flashing rom and then reboot back to recovery to flash gapps. Do we need to edit updater script to be able to flash via twrp and lastly will it erase internal data.
Sent from my Z1 using Tapatalk
os_man said:
Password for "ZUK_Z1_1.5.215_M_ST_160105_Modifyed.zip" ?
Click to expand...
Click to collapse
New link has updated with key, https://mega.nz/#!fYYh0QDA!nYf0vvXpzyl5q5t-8-cZQWENbYoIN__vaHO_Weyg-YU
ranka79 said:
Can it be flashed with Breadcrust's twrp update 5 and can gapps be flashed back to back after flashing rom or do we need to reboot after flashing rom and then reboot back to recovery to flash gapps. Do we need to edit updater script to be able to flash via twrp and lastly will it erase internal data.
Sent from my Z1 using Tapatalk
Click to expand...
Click to collapse
Just flash the rom and the gapps without a reboot in any twrp recovery. Internal data will not be erased. No edits needed
Zui device is code named k9 and cyanogenOS is code named hem, are you sure no need to edit updater script or it has already been modified, I'm currently on cos, will I be able to flash back cos in case something goes wrong. Sorry for noob questions
Sent from my Z1 using Tapatalk
- Link google : FIle TOt https://docs.google.com/uc?id=0Bz9JnvkWYtwcRXRCTTBRWS1lRmM&export=download
: And LGUP
1. Download this.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. For the "BIN File" select the "rootedsystemvs.tot" file you extracted in step 3.
12. You'll have root in about 3 minutes!
Donate : [email protected] (paypal of my have problem use paypal myfriend)
Thank you upload help me. Thank.
i have h960p(64gb) with h960tr mm firmware, this work with??
i not sure.
https://drive.google.com/file/d/0B8mSVItI_cqRdXY3aFdHQXVHQU0/view?usp=sharing
rootedsystem h960a gogogo.
Hey thanks mate!
Next stop is.. H960 64GB?
Root without bootloader right?
I ll buy tomorrow a V10 and I am starting root
Στάλθηκε από το MT11i μου χρησιμοποιώντας Tapatalk
Thanks mate, great job
Now is time to by a V10....
D855
RUNNING:N&N 2.0 STOCK MM
Doesn´t work for my V10 (non branded german Version)
LGUP displays an error message " Error: TOT file is invailed"
Process mode is "refurbish"
I think the link is down or am I missing something?
EDIT: never mind. It was my browser F'in up.
Sent from my iPad using Tapatalk
The Link still works: https://drive.google.com/file/d/0B8mSVItI_cqRdXY3aFdHQXVHQU0/view?usp=sharing :
Didn't work here either (unbranded Danish version). Same error code. Invalid TOT file.
Sent from my iPad using Tapatalk
+1 Didn't work: unbranded NLD version.
flash successfully v10 H960 International.
Edit:
Update:
Root perfectly.. I am so happy..
Weird that it works in some and not in some other H960's.
rmlsalta;
was your phone 5.1.1 before?
tungkick said:
- Link google : FIle TOt https://drive.google.com/file/d/0B8mSVItI_cqRdXY3aFdHQXVHQU0/view?usp=sharing
: And LGUP
1. Download this.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. For the "BIN File" select the "rootedsystemvs.tot" file you extracted in step 3.
12. You'll have root in about 3 minutes!
Donate : [email protected] (paypal of my have problem use paypal myfriend)
Thank you upload help me. Thank.
Click to expand...
Click to collapse
Andoid 6 is on the way for the LG V10. Do you know, will the phone get an update when it is rooted?
Lucky man...its course your using Softwareversion V10c regulary.
My decice uses V10a, so there is no official tot file from LG yet...
Funkymonkey54 said:
Lucky man...its course your using Softwareversion 10c regulary.
My decice uses 10p, so there is no official tot file from LG...
Click to expand...
Click to collapse
Mine is V10c-EUR-xx but it still fails on my end.
Sent from my iPad using Tapatalk
Funkymonkey54 said:
Doesn´t work for my V10 (non branded german Version)
LGUP displays an error message " Error: TOT file is invailed"
Process mode is "refurbish"
Click to expand...
Click to collapse
same problem, HELP PLEASE !
LG V10 H960a AME (V 5.1.1 )
Funkymonkey54 said:
Doesn´t work for my V10 (non branded german Version)
LGUP displays an error message " Error: TOT file is invailed"
Process mode is "refurbish"
Click to expand...
Click to collapse
lg up say Error: TOT file is invailed right.? ok i will teamveiwer PC of you find fix . But the night i think tomorow.
if can open teamveiwer now i can teamveiwer find fix now because i have only 30minute .
tungkick said:
if can open teamveiwer now i can teamveiwer find fix now because i have only 30minute .
Click to expand...
Click to collapse
Thanks a lot for your efforts mate.
I'm at work so I cannot open Teamviewer in here. Do you think your solution will work on 6.0 devices, too?
Like V20b?
ROOT V20J H901
LOAD UP ON FILE WITH LG UP TOT
FILE HAS FULL ROOT + TWRP
LINK: https://drive.google.com/file/d/0B3R77elw9JjNQkpaUWkwNGstU1U/view
Flash files extract via LG UP tot
1: Flash files extract via LG UP choose upgrade then choose file tot.
2: Flash finished command "adb reboot recovery" or using the hard keys, power off, press the volume keys simultaneously 2 + source reduction, to release the logo and press the power key hands always, reduce the volume keys remain, keeping 2 keys, until into TWRP
3: When connected to a computer to copy TWRP SuperSU zip copied to the computer to download
4: Flash SuperSU
5: Reboot
Donate Paypal: [email protected]
You sir are my hero!! Donation coming in the next few days!!?
Slightly different way than we performed last night, but looks much more precise
Great work!
Sent from my A0001 using XDA-Developers mobile app
what exactly is "downloadmod"
tnpapadakos said:
what exactly is "downloadmod"
Click to expand...
Click to collapse
I believe he means "Download Mode"
Power Off
Hold Volume Up
Plug In USB
(i think)
tnpapadakos said:
what exactly is "downloadmod"
Click to expand...
Click to collapse
volume up on your phone as you plug in your usb
warp64 said:
volume up on your phone as you plug in your usb
Click to expand...
Click to collapse
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
tnpapadakos said:
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
Click to expand...
Click to collapse
Update TWRP to 3.0.2
Then you can use Eliminater74 Rom
Flash Part 1 Dont Reboot
Flash A Part 2 Dont Reboot
Flash SuperSU
Note**If Elimnater74s Rom does happen to delete your recovery.img then you can still flash TWRP by using FlashFire by ChainFire**
Also once you upgrade to MM even if its a ROM you CANNOT revert back to LP.
tnpapadakos said:
so, in the stock recovery I guess...
what if I have stock LP, but rooted, and with TWRP recovery?
Click to expand...
Click to collapse
Then you need to go to the Developer Section and see Eliminater74 because i think he's the only one with a rooted MM
[ROM] [STOCK] V10_H901_V20E_Stock2,430 posts
Thanks: 8,189
Double0EK said:
Update TWRP to 3.0.2
Then you can use Eliminater74 Rom
Flash Part 1 Dont Reboot
Flash A Part 2 Dont Reboot
Flash SuperSU
Note**If Elimnater74s Rom does happen to delete your recovery.img then you can still flash TWRP by using FlashFire by ChainFire**
Also once you upgrade to MM even if its a ROM you CANNOT revert back to LP.
Click to expand...
Click to collapse
OK thanks :good:
tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choosekdz v20e H901then chooseREFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
Where in these instructions do we flash the MM version of twrp? Or, is it already part of the tot file?
sanjsrik said:
Where in these instructions do we flash the MM version of twrp? Or, is it already part of the tot file?
Click to expand...
Click to collapse
It is part of the tot, directions look good, follow completely and you can have stock-rooted MM
Sent from my A0001 using XDA-Developers mobile app
demkantor said:
It is part of the tot, directions look good, follow completely and you can have stock-rooted MM
Click to expand...
Click to collapse
All I was looking for, thanks, will try this this weekend.
OP, just a suggestion, you may want to indicate that twrp is part of the tot file. It wasn't clear there.
This method certainly looks cleaner than the other method discussed last night. Looks like pure stock rooted which is exactly what I want. I passed out last night after i finished backing up everything which is a good thing now! I don't see anything about unlocking the bootloader in his instructions which is interesting. Basically it's flash the kdz, flash the tot, reboot recovery and flash superSu and you're golden. You would assume that this is necessary but has anyone tried this yet and not had to do that? It would actually be a bonus to not have to do that and avoid the corruption splash screen.
tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choose kdz v20e H901 then choose REFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
You will have a donation from me later in the week
tungkick said:
Download rom kdz: https://docs.google.com/uc?id=0B3R77elw9JjNSmVsVjhjbWdLcEU&export=download
Download Tot add twrp: https://docs.google.com/uc?id=0B8mSVItI_cqRc0NPVlEtZmxqb2s&export=download
LG UP Download:MEGA, GOOGLEDRIVE
Step by step flash:
1. Download all file.
2. Install the LG Drivers.
3. Extract the RAR File to get the .TOT file.
4. Unzip "lgupnew.zip"
5. Run LGUP_Store_Frame_Ver_1_14_3.msi
6. LGUP_8994_DLL_Ver_0_0_1_18.msi
7. Copy the "common" folder to "C:\Program Files (x86)\LG Electronics\LGUP\model"
8. Plug phone into Downloadmod.
9. Run "LGUP" from your start menu.
10. Select your Phone if see option.
11. Choose bin file choose kdz v20e H901 then choose REFUBISH
12. Go to setting > develop > enabable usb debugging + oem unlock check.
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
14. Put phone to twrp download Supper SU (https://drive.google.com/file/d/0B8mSVItI_cqRNTlFeVJFNC1aejA/view?usp=sharing) Copy to phone memory then flash it> Done phone have root.
Donate : Click
Thank you @ Eliminater74
Click to expand...
Click to collapse
If we are already on stock MM do we need to install the KDZ first? Or is that just to get you to MM?
Great write up by the way, even with a language barrier you made this simple and easy to understand!
[emoji106]
Sent from my LG-H901 using Tapatalk
Sorry for interrupting, i am H961N's user.
I am curious will this method also works on H961N and other models? Does this method need unlocked bootloader?
Cause' i am very desirous to have root on MM.
Thank you.
Everything seems fine until I get to this point:
13. Put downloadmod again, open lgup choose UPGRADE > choose file TOT LGH901AT-00-V20e-TMO-US-MAR-16-2016-ARB01+0.tot >Start.
Click to expand...
Click to collapse
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Nevermind, had to get into fastboot via Vol down + plug in USB then unlock the bootloader via adb command
ReelFiles said:
Everything seems fine until I get to this point:
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Click to expand...
Click to collapse
are you already on Marshmallow or are you doing this from Lollipop 5.1.1?
ReelFiles said:
Everything seems fine until I get to this point:
after that I just get boot loops, red text boot verification failed.
I enabled OEM unlock in settings, so I don't know what the issue is. I also tried redownloading the files.
Click to expand...
Click to collapse
is your bootloader unlocked? that was my problem. had to unlock it to get the phone to boot, then i got into TWRP and flashed su. i got it all done with the help of member warp64
Hello, here is a brief explanation to install stock rom pie with screen recording, which also contains some cool settings. It does not differ in any way with the official stock v30e, (kdz file) you can get on the website of lg firmwares or other places. just the screen recording and i think i remember the update patch is not the same either. The installation of this .up file has to be done from the 20k firmware, otherwise it does not work.
in general features what we will do will be:
1-we make downgrade to android 8, with refurbish option and kdz 20k
2-quickly configure our device and
3-update the device with the option fota upgrade and .up file.
read it a couple of times, to familiarize yourself with the process, if this is your case and you have not done it before.
Donwload this file from mega,weighs 1.91gb;
https://mega.nz/file/WQkTjbrA
Password f1T67seph-BxIOcivfpcFFxiCueHQgukTiK-e820eEo
>Download 20k kdz for f800l from lg firmwares.
enable usb debugging and back up your files. You are warned, since by downgrade you will lose everything in the internal storage, if you are in the latest version 30e of android 9. once done extract zip to a folder. first install the lgup .exe (if you don't have it installed) and then the .exe (msi) if you don't have it installed either. IMPORTANT: you have to find out how is your arb (anti-rollback) on the device.
write to the device's dialer.
*#*#244773825625#*#*
once you enter these numbers and symbols, a window will open and, sliding down you will find the tab; antirollback version. everything that appears in red should be 0 (zero).
*****IMPORTANT*****
If so, you can continue, if not, you will turn the device into brick.
***********************
the zip also contains the .up file,another called wpdapi and finally lgup_common.dll.
copy and paste these two files (wpdapi, lgup_common.dll) in the following path; local disk / x86 program files / lg electronics / lgup / model / common, If you have installed 1.0.28.5 (.dll), this is replaced by the one I leave you, it is a version for lg v20 f800 s / l / k, and it is version 1.0.36.0. Pasting into the common folder will add the wpdapi file and you will replace it when prompted by lgup_common.dll.
What I did before pasting these files in the common folder was to copy and save the version 1.0.28.5 .dll file in another folder, in case the connection between the phone and the lgup tool fails. so you don't have to run the msi .exe again just change it.
Having everything ready we connect the device to the pc, it doesn't matter if it is on, we will open the lgup tool, select refurbish and the kdz 20k. we wait for it to finish.
We quickly configure our device, you will be in android 8, enable usb debugging and reconnect to the pc.
this time we select the option fota upgrade, and the .up file of the zip and flash with the mobile on and without losing sight of the screen. I recommend having the screen timeout always on or in 5 min.
You will see that lgup freezes at 4 percent, but it is normal, soon a warning will appear in blue, "fota upgrade easy", on the mobile screen we press the back button and we go to the main screen, we wait ... he will only update. look closely at the screen and let it finish.
and done !, it has not been so brief. a big hug to all.
Video: https://youtu.be/Qc5loYw9MFo
notice: how to delete or remove dual clock on pie rom.
I have rescued this way to remove the dual clock from the lock screen of an xda member. all credits to him @vanhoavn.
1.download app called setedit(settings database editor) from google play and install it.
2.activate developer options and usb debugging, connect to pc. file transfer.
3. open command window (cmd) in adb folder and type
4.adb devices, adb shell and type
5. pm grant by4a.setedit22 android.permission.WRITE_SECURE_SETTINGS
6.hit enter
7.open app setedit, select SECURE TABLE in the drop-down on the right
8.Look for the" roaming _dualclock" option and change the value to 1.
9.done, Lock the screen and unlock with two taps and see the change.
tested today August 25 with the update 30h.
Logically if we do a factory reset this change will return with both watches.
hello, good news. new upgrade for lg v20 f800l version 30h. install via ota or lg firmwares page.
lg v20 latest android pie update
bernavaldiesel1 said:
hello, good news. new upgrade for lg v20 f800l version 30h. install via ota or lg firmwares page.
Click to expand...
Click to collapse
Hey, so have you updated your lg v20 to latest pie update please let me know how is the performance of this update....is it better than android 8 (oreo)
Its a security patch
Would anyone know where I can find an OTA for the update? I need a .up file not a KDZ, tks.
Wow, this works on a Lg G6 with android 9, thank you