so I have the asus transformer prime TF-201 and the twrp recovery available is 2.6.6. Can i actually flash 2.8.5 ?
QuadTurbo said:
so I have the asus transformer prime TF-201 and the twrp recovery available is 2.6.6. Can i actually flash 2.8.5 ?
Click to expand...
Click to collapse
The latest official TWRP version is 2.6.3.0 and the device is no longer maintained.
Where did you find the 2.8 version?
QuadTurbo said:
so I have the asus transformer prime TF-201 and the twrp recovery available is 2.6.6. Can i actually flash 2.8.5 ?
Click to expand...
Click to collapse
Yes, you can upgrade your version of TWRP as long as there is a newer version of TWRP for your model number.
If you get it in .img format you can flash it in TWRP(TWRP can flash .img files) or with Flashify.
Or
If you get it in .zip format you can flash it in TWRP also.
Just remember, after you flash it in TWRP you need to find the reboot option at TWRP main menu and choose "reboot recovery" and it will reboot into the new TWRP, if you fail to do this step you won't keep the new version and it will revert back to the older version that you already had.
Sent from my SCH-I535 using Tapatalk
http://forum.xda-developers.com/transformer-tf700/development/rom-t3457417
Well if you look at this thread the rom is for TF-700 and TF-201 and the pre requisites require TWRP 28.0.0. While The official release for TF-201 Is 26.6.3. This Confuses me. How Do I flash it???
Droidriven said:
Yes, you can upgrade your version of TWRP as long as there is a newer version of TWRP for your model number.
If you get it in .img format you can flash it in TWRP(TWRP can flash .img files) or with Flashify.
Or
If you get it in .zip format you can flash it in TWRP also.
Just remember, after you flash it in TWRP you need to find the reboot option at TWRP main menu and choose "reboot recovery" and it will reboot into the new TWRP, if you fail to do this step you won't keep the new version and it will revert back to the older version that you already had.
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/tra...overy-kang-twrp-tf700t-2-8-x-xarea51-t3049395.
Can you Just explain This KANG TWRP?????
QuadTurbo said:
http://forum.xda-developers.com/transformer-tf700/development/rom-t3457417
Well if you look at this thread the rom is for TF-700 and TF-201 and the pre requisites require TWRP 28.0.0. While The official release for TF-201 Is 26.6.3. This Confuses me. How Do I flash it???
Click to expand...
Click to collapse
When you see a thread that says a ROM requires a certain version of TWRP, it means you need "at least" that version and not a version older than that. Best bet is to always use the newest, most up to date TWRP then you don't have to worry about it because newer versions of TWRP can flash older ROMs with no problem but older versions of TWRP can't flash some newer ROMs. As ROMs become newer they require newer TWRP because partitioning structure changes with each new version of android so the recovery has to be compatible with the changes made in partition structure, that's why older recovery can't flash some newer ROMs, because the older recover doesn't have the necessary changes to keep up with changes in partition structure.
Sent from my SCH-I535 using Tapatalk
---------- Post added at 05:06 PM ---------- Previous post was at 05:02 PM ----------
QuadTurbo said:
http://forum.xda-developers.com/tra...overy-kang-twrp-tf700t-2-8-x-xarea51-t3049395.
Can you Just explain This KANG TWRP?????
Click to expand...
Click to collapse
There isn't much to explain other than the fact that "KANG" means they created that recovery using work someone else did, it means they probably ported that recovery from a different device.
Sent from my SCH-I535 using Tapatalk
@QuadTurbo
Good advice: READ! As much as you can find about what you're going to do. XDA + google will help you to find nearly everything...
KANG TWRP is a unofficial TWRP, its built for a unofficial bootloader (ported from another device) (included in the Hairybean Rom Thread)
Latest TWRP 3.0.2.0 + Hairybean Bootloader 4.2.1 + instructions can be found when you click the links.
Make sure to READ and UNDERSTAND everything before you proceed flashing a modified bootloader to your device, as you can easily (hard)brick it by flashing a wrong bootloader.
So you're implying that i can actually flash an unofficial version of TWRP Recovery.
LS.xD said:
@QuadTurbo
Good advice: READ! As much as you can find about what you're going to do. XDA + google will help you to find nearly everything...
KANG TWRP is a unofficial TWRP, its built for a unofficial bootloader (ported from another device) (included in the Hairybean Rom Thread)
Latest TWRP 3.0.2.0 + Hairybean Bootloader 4.2.1 + instructions can be found when you click the links.
Make sure to READ and UNDERSTAND everything before you proceed flashing a modified bootloader to your device, as you can easily (hard)brick it by flashing a wrong bootloader.
Click to expand...
Click to collapse
Since I plan on running a NV Flash on my prime before flashing any other official or unofficial version of custom recovery. How do i Find out the number of my bootloader. Since I Unlocked The Bootloader, CPU-Z and any other app like it keeps showing me bootloader unknown.
Related
i updated my new tf700 to jb official update through OTA , but it lags alot, very dissappointed by the performance , now im thinking of a custom rom, kindly guide me how can i unlock and root official stock jb tf700?
harrisfayyaz said:
i updated my new tf700 to jb official update through OTA , but it lags alot, very dissappointed by the performance , now im thinking of a custom rom, kindly guide me how can i unlock and root official stock jb tf700?
Click to expand...
Click to collapse
OK, let do one step at a time, go here http://forum.xda-developers.com/showthread.php?t=1795156 and download the unlock tool app, then run the tool to unlock your device, it's very safe and you need internet connectivity while unlocking. Give it a try and report back. If sucessful, we will take you to next step.
buhohitr said:
OK, let do one step at a time, go here http://forum.xda-developers.com/showthread.php?t=1795156 and download the unlock tool app, then run the tool to unlock your device, it's very safe and you need internet connectivity while unlocking. Give it a try and report back. If sucessful, we will take you to next step.
Click to expand...
Click to collapse
thank you very much for the help
but it says only for ics...?
harrisfayyaz said:
but it says only for ics...?
Click to expand...
Click to collapse
Ignore this, they forgot to update the description. Many xda members have successfully used the unlock tool on JB.
_that said:
Ignore this, they forgot to update the description. Many xda members have successfully used the unlock tool on JB.
Click to expand...
Click to collapse
succesfully done, plz proceed.
harrisfayyaz said:
succesfully done, plz proceed.
Click to expand...
Click to collapse
Go here http://forum.xda-developers.com/showthread.php?t=1938129 and proceed start with Section 2.
Make sure you download TWRP version 2.3.1.0 or 2.3.3.0, don't download the latest version.
This section is showing you how to install Custom recovery TWRP. Once done we will proceed to the final phase.
buhohitr said:
Go here http://forum.xda-developers.com/showthread.php?t=1938129 and proceed start with Section 2.
Make sure you download TWRP version 2.3.1.0 or 2.3.3.0, don't download the latest version.
This section is showing you how to install Custom recovery TWRP. Once done we will proceed to the final phase.
Click to expand...
Click to collapse
done. what is the next step.
harrisfayyaz said:
done. what is the next step.
Click to expand...
Click to collapse
OK, you are set, now you have many options:
1. Stock with rooted
If you want to keep stock, then just download the SuperSu and use twrp to flash "install" the zip package can be found here http://download.chainfire.eu/310/SuperSU/UPDATE-SuperSU-v1.04.zip?retrieve_file=1
2. Custom rom and custom kernel.(use TWRP to flash the rom or kernel zip file).
They come with pre-rooted, so you don't need root. Here is the best rom which compatible with both the tablet and dock:
http://forum.xda-developers.com/showthread.php?t=2049274
I would take option 2, option1 is pointless.
buhohitr said:
OK, you are set, now you have many options:
1. Stock with rooted
If you want to keep stock, then just download the SuperSu and use twrp to flash "install" the zip package can be found here http://download.chainfire.eu/310/SuperSU/UPDATE-SuperSU-v1.04.zip?retrieve_file=1
2. Custom rom and custom kernel.(use TWRP to flash the rom or kernel zip file).
They come with pre-rooted, so you don't need root. Here is the best rom which compatible with both the tablet and dock:
http://forum.xda-developers.com/showthread.php?t=2049274
I would take option 2, option1 is pointless.
Click to expand...
Click to collapse
what about this one?
http://forum.xda-developers.com/showthread.php?t=2107271
and do i have to flash jb bootloader or mo .25 one, nd should i flash deodex or odex version and which kernal is better
harrisfayyaz said:
what about this one?
http://forum.xda-developers.com/showthread.php?t=2107271
Click to expand...
Click to collapse
This one is just stock with root, no performance gain...it just stock with root!! You're UNLOCKED, why stay with stock rom, right? Custom rom is the way to go from now on....
---------- Post added at 11:53 AM ---------- Previous post was at 11:49 AM ----------
harrisfayyaz said:
and do i have to flash jb bootloader or mo .25 one, nd should i flash deodex or odex version and which kernal is better
Click to expand...
Click to collapse
You already on .25 JB right? then you don't need to flash any bootloader. Here is the best setup:
Cromi (cleanrom) 3.2.2 ODEX with _that_stock kerne. During the setup select:
fsync disabled and seeder.(with seeder, you can download later on so no big deal).
buhohitr said:
This one is just stock with root, no performance gain...it just stock with root!! You're UNLOCKED, why stay with stock rom, right? Custom rom is the way to go from now on....
---------- Post added at 11:53 AM ---------- Previous post was at 11:49 AM ----------
You already on .25 JB right? then you don't need to flash any bootloader. Here is the best setup:
Cromi (cleanrom) 3.2.2 ODEX with _that_stock kerne. During the setup select:
fsync disabled and seeder.(with seeder, you can download later on so no big deal).
Click to expand...
Click to collapse
thank you man for all your help ...
buhohitr said:
Go here http://forum.xda-developers.com/showthread.php?t=1938129 and proceed start with Section 2.
Make sure you download TWRP version 2.3.1.0 or 2.3.3.0, don't download the latest version.
This section is showing you how to install Custom recovery TWRP. Once done we will proceed to the final phase.
Click to expand...
Click to collapse
@buhohitr
Question for the master: I am on CROMI 3.2.1 and still have TWRP 2.2.3. Should I push TWRP 2.3.1.0 or 2.3.3.0 before I flash CROMI 3.2.2?? I've been reading posts about conflicts between outdated recoveries and bootloader. What's outdated? At the same time, the latest TWRP builds seem to be buggy and sdbags wrote he went back to CWM? What's your advice?
berndblb said:
@buhohitr
Question for the master: I am on CROMI 3.2.1 and still have TWRP 2.2.3. Should I push TWRP 2.3.1.0 or 2.3.3.0 before I flash CROMI 3.2.2??
Click to expand...
Click to collapse
Update to TWRP 2.3.1, it works for most of us. I don't know which version was the first to be compatible with the JB bootloader, but 2.2.3 sounds quite old - and if you choose "wipe data" from the bootloader menu or use any "boot to recovery" tools with an incompatible recovery, you risk turning your tablet into an expensive paperweight.
_that said:
Update to TWRP 2.3.1, it works for most of us. I don't know which version was the first to be compatible with the JB bootloader, but 2.2.3 sounds quite old - and if you choose "wipe data" from the bootloader menu or use any "boot to recovery" tools with an incompatible recovery, you risk turning your tablet into an expensive paperweight.
Click to expand...
Click to collapse
Thanks for that, _that - no pun intended. Really appreciate it, I had a feeling, the recovery may be too old.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
I am on the new 4.2 bootloader and TWRP 2.4. Last night I went to upgrade TWRP. I chose the TWRP file named twrp-2.5.0.0-tf300t-4.2.blob. I renamed the file twrp.blob and pushed it out via fast boot. When done I rebooted via fastboot, and then rebooted into recovery.
Now something is not right, twrp is split into two screens horizontily and shows the lock picture on both. I have to power cylce to get back to Andriod. Where did I go wrong? Should I have chosen the .img file?
Ok I think think I realized there has been a second 4.2 bootloader update from Asus and that's my problem. Is that right?
Sent from my GT-N7100 using Tapatalk 2
yes.
A lot of people have soft bricked their device because of this.
Yeah from what I've read twrp 2.5.0.0-4.2 will only work correctly on JB bootloader 10.6.1.15.3, not sure yet if twrp 2.4.4.0-4.2 works on 10.6.1.15.3.
I have no issues with twrp 2.5.0.0-4.2 on JB 10.6.1.15.3
10.6.1.8 - TWRP 2.4.4.0-4.2
10.6.1.15.3 - TWRP 2.5.0.0-4.2
pjc21 said:
Yeah from what I've read twrp 2.5.0.0-4.2 will only work correctly on JB bootloader 10.6.1.15.3, not sure yet if twrp 2.4.4.0-4.2 works on 10.6.1.15.3.
I have no issues with twrp 2.5.0.0-4.2 on JB 10.6.1.15.3
10.6.1.8 - TWRP 2.4.4.0-4.2
10.6.1.15.3 - TWRP 2.5.0.0-4.2
Click to expand...
Click to collapse
So I have 10.6.1.8 and installed 2.5.0.0 and am experiencing the same problem (the noob proof guide wasn't very noob proof apparently). How would I go about putting on the correct version?
EDIT: So I just took the plunge and reflashed the correct version which I found http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.4.4.0-tf300t-4.2.blob here. I was initially worried because I wasnt sure if I could just flash over and downgrade versions...it worked for me, and TWRP is currently making a backup and is full screen and running.
TWRP GONE Wrong
Tunameltsalad said:
So I have 10.6.1.8 and installed 2.5.0.0 and am experiencing the same problem (the noob proof guide wasn't very noob proof apparently). How would I go about putting on the correct version?
EDIT: So I just took the plunge and reflashed the correct version which I found http://techerrata.com/file/twrp2/tf300t/openrecovery-twrp-2.4.4.0-tf300t-4.2.blob here. I was initially worried because I wasnt sure if I could just flash over and downgrade versions...it worked for me, and TWRP is currently making a backup and is full screen and running.
Click to expand...
Click to collapse
Ok I may be late but I am having the same problem I rooted my tf300t with motochopper not hard at all but once I tried to flash twrp I have two screens. I downloaded what the same blob file you did but not sure the command to type so I typed -i 0x0B05 flash recovery twrp.blob. What should I type?
dmont2006 said:
Ok I may be late but I am having the same problem I rooted my tf300t with motochopper not hard at all but once I tried to flash twrp I have two screens. I downloaded what the same blob file you did but not sure the command to type so I typed -i 0x0B05 flash recovery twrp.blob. What should I type?
Click to expand...
Click to collapse
Which bootloader do you have?
cmendonc2 said:
Which bootloader do you have?
Click to expand...
Click to collapse
same problem 4.2 bootloader
i update to twrp v2.6.3.0 to try and didnt work to same as 2.0.7.1
its annoying because the (normal ) working version was around 2.0....
i can go back by using terminal emulator and twrp blob instal but i want to instal cm11 so i need latest or higher than v2.6.3.0
i dont know how to make it work .
wouttii said:
same problem 4.2 bootloader
i update to twrp v2.6.3.0 to try and didnt work to same as 2.0.7.1
its annoying because the (normal ) working version was around 2.0....
i can go back by using terminal emulator and twrp blob instal but i want to instal cm11 so i need latest or higher than v2.6.3.0
i dont know how to make it work .
Click to expand...
Click to collapse
Hi, ive been searching recently but can't seem to find out how to update the bootloader. Dont hate me:'( trust me ive tried to find it myself but id really appreciate if someone could give me a link or tell me how. Thanks in advance.
First of all sorry if there are some solution in other thread but i was searching a lot and found nothing. Also i cannot ask this on the twrp thread because of the xda system that don't allow me to write there or on some other development thread because my account have few than 10 messages (very frustrating this).
I tried to install the twrp 2.8.6.0 and it's impossible to have it working, when i install it always i have a bootloop that don't allow the phone to enter to the recovery.
I tried all the ways to install it (app flashify, app twrp manager, app kernel adiutor, cmd, toolkit, through twrp 2.8.7.0, 2.8.4.0, 2.8.7 multirom) and still without luck. It's very strange because is THAT specific version (2.8.6.0) that don't work, when i flash other version like 2.8.7 works perfectly.
Anyone knows what's the problem?
mustang_ssc said:
First of all sorry if there are some solution in other thread but i was searching a lot and found nothing. Also i cannot ask this on the twrp thread because of the xda system that don't allow me to write there or on some other development thread because my account have few than 10 messages (very frustrating this).
I tried to install the twrp 2.8.6.0 and it's impossible to have it working, when i install it always i have a bootloop that don't allow the phone to enter to the recovery.
I tried all the ways to install it (app flashify, app twrp manager, app kernel adiutor, cmd, toolkit, through twrp 2.8.7.0, 2.8.4.0, 2.8.7 multirom) and still without luck. It's very strange because is THAT specific version (2.8.6.0) that don't work, when i flash other version like 2.8.7 works perfectly.
Anyone knows what's the problem?
Click to expand...
Click to collapse
Install either TWRP 2.8.6.0.6 materialised (personally tested works perfect) or the latest 2.8.7.0.5 materialised other users say it works with flashing firmware and works with encrypted systems
https://www.androidfilehost.com/?w=files&flid=30332
Sent from my A0001 using Tapatalk
Renosh said:
Install either TWRP 2.8.6.0.6 materialised (personally tested works perfect) or the latest 2.8.7.0.5 materialised other users say it works with flashing firmware and works with encrypted systems
https://www.androidfilehost.com/?w=files&flid=30332
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
And do you know if works well with the new Sultan CM13 versions? That's the problem i have, the other TWRP versions cannot flash correctly that rom and also i heard that the TWRP 2.8.6.0.6 don't flash the rom correctly, maybe I'm wrong.
Me and many people have this strange problem that don't allow us to flash the 2.8.6.0. Hope someone can help us.
Thanks anyway.
mustang_ssc said:
And do you know if works well with the new Sultan CM13 versions? That's the problem i have, the other TWRP versions cannot flash correctly that rom and also i heard that the TWRP 2.8.6.0.6 don't flash the rom correctly, maybe I'm wrong.
Me and many people have this strange problem that don't allow us to flash the 2.8.6.0. Hope someone can help us.
Thanks anyway.
Click to expand...
Click to collapse
The problem isn't flashing the ROM correctly its that you don't have the correct firmware so it gives an error and refuses to flash the latest Sultan builds. TWRP 2.8.6.0.6 or 2.8.7.0.5 both in that directory I posted earlier can flash the correct firmware. You'll need to download the latest CM13 flash that wipe again and then flash Sultan to have the latest baseband version
Renosh said:
The problem isn't flashing the ROM correctly its that you don't have the correct firmware so it gives an error and refuses to flash the latest Sultan builds. TWRP 2.8.6.0.6 or 2.8.7.0.5 both in that directory I posted earlier can flash the correct firmware. You'll need to download the latest CM13 flash that wipe again and then flash Sultan to have the latest baseband version
Click to expand...
Click to collapse
I did that you told me and now i have the Sultan cm13 working perfectly.
I didn't know that, thanks.
Okay, many of us don't do this everyday but I flashed TWRP 3.0.2.0 on my OPO and needed to go back to 2.8.6.0 to use jgcaap's MM build.
So i tried flashing 2.8.6.0 img file from 3.0.2 and guess what happened? No. It didn't downgrade it self, instead I lost my recovery. My phone rebooted straight to system after being stuck on Bootlogo for a while. So I flash the recovery AGAIN via fastboot, flashify, RashR, Flashfire, Mobile Terminal whatever I could think of. But nope, same result whatsoever. Flashing other recoveries doesn't work either. Same errors return.
Then I thought of flashing 3.0.0.0 instead of 2.8.6.0 and yes, flashing 3.0.0.0 from 3.0.2.0 worked indeed. Then I started to download all the recovery files till 2.8.6.0 and started flashing them one after another, step by step climbing down the number and it kept downgrading but ONE version down at a time, if I try to skip it returns the same bs as before. Then flashing down until I reached 2.8.6.0 and then flashed that too via RashR. And surprise! Surorise! The recovery version I needed was not working. It would be flashed then the recovery would disappear and it would go into a no recovery state like before again. Then I'd flash 2.8.6.1 and get recovery back. And now finally after all the endeavor I'm on 2.8.6.1.
Anybody might know the reason of this stupid anomaly? And why it doesn't work?
And also why I can't flash ANY OTHER recovery?
Unnecessary screenshot attached :good: enjoy~
Tiash420 said:
Okay, many of us don't do this everyday but I flashed TWRP 3.0.2.0 on my OPO and needed to go back to 2.8.6.0 to use jgcaap's MM build.
So i tried flashing 2.8.6.0 img file from 3.0.2 and guess what happened? No. It didn't downgrade it self, instead I lost my recovery. My phone rebooted straight to system after being stuck on Bootlogo for a while. So I flash the recovery AGAIN via fastboot, flashify, RashR, Flashfire, Mobile Terminal whatever I could think of. But nope, same result whatsoever. Flashing other recoveries doesn't work either. Same errors return.
Then I thought of flashing 3.0.0.0 instead of 2.8.6.0 and yes, flashing 3.0.0.0 from 3.0.2.0 worked indeed. Then I started to download all the recovery files till 2.8.6.0 and started flashing them one after another, step by step climbing down the number and it kept downgrading but ONE version down at a time, if I try to skip it returns the same bs as before. Then flashing down until I reached 2.8.6.0 and then flashed that too via RashR. And surprise! Surorise! The recovery version I needed was not working. It would be flashed then the recovery would disappear and it would go into a no recovery state like before again. Then I'd flash 2.8.6.1 and get recovery back. And now finally after all the endeavor I'm on 2.8.6.1.
Anybody might know the reason of this stupid anomaly? And why it doesn't work?
And also why I can't flash ANY OTHER recovery?
Click to expand...
Click to collapse
Did you try flashing the recovery img via TWRP itself? And are you using any theme on TWRP 3.x.x.x?
Nope no themes and I tried flashing through every method I could think of but nope, doesn't work.
Tiash420 said:
Nope no themes and I tried flashing through every method I could think of but nope, doesn't work.
Click to expand...
Click to collapse
You don't need to be on TWRP 2.8.6.0 to flash jgcaap MM build. Just use 3.0.2.0 it flashes modem and does everything the older one you're trying to get to can do.
Sent from my A0001 using Tapatalk
Renosh said:
You don't need to be on TWRP 2.8.6.0 to flash jgcaap MM build. Just use 3.0.2.0 it flashes modem and does everything the older one you're trying to get to can do.
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I get the notification quick settings bug, I mean, I can't get quick setting toggles directly from notification nor can I have a regular basic swipe lock screen. And the bugs persist no matter which ever recovery I'm flashing through and with or without Gapps. How do I get pass that? Meanwhile my friend on the other hand downloaded the same version from the same place and he doesn't face those bugs. :'| Why is this happening to me?
Tiash420 said:
I get the notification quick settings bug, I mean, I can't get quick settings directly from notification nor can I have a regular basic swipe lock screen. And the bugs persist no matter which ever recovery I'm flashing through and with or without Gapps. How do I get pass that?
Click to expand...
Click to collapse
I've been seeing mentions of flashing 21/4 build first set it up then dirty flash latest update. I also got the same issue when I last flashed jgcaap MM ROM. It would have been best to just ask for advise there than assume it's a recovery issue
Sent from my A0001 using Tapatalk
Renosh said:
I've been seeing mentions of flashing 21/4 build first set it up then dirty flash latest update. I also got the same issue when I last flashed jgcaap MM ROM. It would have been best to just ask for advise there than assume it's a recovery issue
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
I'll thank my friends who owned the OPO before I did for the recovery 'assumptions' :|
Tiash420 said:
I'll thank my friends who owned the OPO before I did for the recovery 'assumptions' :|
Click to expand...
Click to collapse
I'm guessing they insisted because of the previous problems with flashing modems for TWRP. Flash the latest 3.0.2.0 and I guarantee it'll work for every ROM only issue that still exists is if you want encryption on CM13 and that's present on all current TWRP versions
Sent from my A0001 using Tapatalk
Renosh said:
I'm guessing they insisted because of the previous problems with flashing modems for TWRP. Flash the latest 3.0.2.0 and I guarantee it'll work for every ROM only issue that still exists is if you want encryption on CM13 and that's present on all current TWRP versions
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Well doesn't matter, I flashed Sultan's unofficial CM13 build via Kumajaya's TWRP 3.0.0.0 and it works fabulously! jgcaap can wait, I'm sure it's not much different in features and stuff! :3
This is an unofficial port of TWRP Recovery for the Oppo F1F on Project Spectrum Bootloader. Much Thanks and credit goes to the TWRP team, Lineage team, and brinleyaus for making this possible. This will allow flashing of modification zips (eg. supersu, magisk, xposed, etc) over the top of Project Spectrum or flashing spectrum based ROMS.
Instructions:
Already running Project Spectrum
- If you haven't already unlocked you bootloader you will need to go into SETTINGS > ABOUT PHONE and tap BUILD NUMBER 7 times to unlock DEVELOPER OPTIONS, Then go into SETTINGS > DEVELOPER OPTIONS and enable them, also enable ADB DEBUGGING and OEM UNLOCK. Now reboot into fastboot (adb reboot bootloader) and run fastboot oem unlock.
- Install this image file through fastboot (If you are unsure of this step follow one of the many tutorials about installing TWRP through fastboot)
On ColourOs with TWRP
- Do a full wipe first or the install will fail. (In TWRP hit WIPE then swipe to factory reset.) Do a backup first as you will lose data.
- Flash this zip file through twrp and then hit "wipe dalvic and cache", then hit HOME then REBOOT then RECOVERY. (rebooting to the new recovery will ensure the recovery sticks) then Flash any Spectrum based rom or restore any Spectrum based backup. NOTE the ColorOs system and boot.img will still be there but wont boot so you MUST flash or restore a Spectrum based rom before you reboot to system.
Reserved.
MiniBlu said:
Reserved.
Click to expand...
Click to collapse
Battery can't charge full!! Help ?
Added file and instructions to OP to flash Spectum bootloader,firmware and twrp From ColorOs TWRP.
Thank.link from androidfilehost is slowly. I using wifi
Sent from my F1w using XDA-Developers Legacy app
MiniBlu said:
Added file and instructions to OP to flash Spectum bootloader,firmware and twrp From ColorOs TWRP.
Click to expand...
Click to collapse
The TWRP is not the 3.1.1
It is the 3.0.1
khannz7 said:
The TWRP is not the 3.1.1
It is the 3.0.1
Click to expand...
Click to collapse
Which file are you talking about, I just checked the links and the flashable zip was actually pointing to the full ROM which defiantly has the 3.1.1-0 version. (I just fixed the link to point at the bootloader, firmware and twrp zip.) Are you rebooting to recovery after flashing to make it stick?
MiniBlu said:
Which file are you talking about, I just checked the links and the flashable zip was actually pointing to the full ROM which defiantly has the 3.1.1-0 version. (I just fixed the link to point at the bootloader, firmware and twrp zip.) Are you rebooting to recovery after flashing to make it stick?
Click to expand...
Click to collapse
The PS 1
Yeah doing it right....But it is the same old twrp 3.0.1 mentioned somewhere in the G+ forums....
Never mind ....did you get the port to work
khannz7 said:
Yeah doing it right....But it is the same old twrp 3.0.1 mentioned somewhere in the G+ forums....
Never mind ....did you get the port to work
Click to expand...
Click to collapse
Which ps1 g or zip?
I have just checked. None of the files I have posted are the old version. They are all the newest 3.1.1-0 version.
No not yet.
MiniBlu said:
I have just checked. None of the files I have posted are the old version. They are all the newest 3.1.1-0 version.
No not yet.
Click to expand...
Click to collapse
I have installed the full ps rom with twrp but what I got is not 3.1.1 it is the 3.0.1
+
Maybe I could help you somewhere with the port
I have to remove the sd card and then re-insert it then it received. who can solve it? The battery will charge too long to fill up
khannz7 said:
I have installed the full ps rom with twrp but what I got is not 3.1.1 it is the 3.0.1
Click to expand...
Click to collapse
OK, I'll download it and check, maybe I uploaded from the old folder. Hope not 6.5 hours to upload it.
MiniBlu said:
OK, I'll download it and check, maybe I uploaded from the old folder. Hope not 6.5 hours to upload it.
Click to expand...
Click to collapse
I would love to help you with the port and maybe I could get something new to learn:fingers-crossed:
Phucan2017 said:
I have to remove the sd card and then re-insert it then it received. who can solve it? The battery will charge too long to fill up
Click to expand...
Click to collapse
No one. If you don't like it stick with ColorOs or Lineage.
khannz7 said:
I would love to help you with the port and maybe I could get something new to learn:fingers-crossed:
Click to expand...
Click to collapse
Not just yet, just got to work out the ramdisk changes needed to get ported roms to boot properly with spectrum kernel, then I'll share the info with you and then let the porting begin.
MiniBlu said:
No one. If you don't like it stick with ColorOs or Lineage.
Not just yet, just got to work out the ramdisk changes needed to get ported roms to boot properly with spectrum kernel, then I'll share the info with you and then let the porting begin.
Click to expand...
Click to collapse
Cool
I did that. But for oppo f1 this rom is not finished yet but there are still many bugs. I return coloros
Just used the spectrum zip and worked flawlessly.(from other thread oops) Thanks alot.
How to go back to coloros ? Do i need to flash stock recovery ?
Sent from my F1f using XDA Labs
the_reds2000 said:
How to go back to coloros ? Do i need to flash stock recovery ?
Sent from my F1f using XDA Labs
Click to expand...
Click to collapse
No, Read the OP of this thread. There is a zip (and instructions) to return to ColorOs Bootloader,firmware and TWRP. From there you can flash any TWRP flashable ColourOs based Rom (ColorOs or LineageOS) or restore backups from them.
Which root method will be used for this?