Unable to unlock bootloader - YU5010A - YU Yuphoria

According to various posts, I tried the following commands to unlock the bootloader of my phone:
- fastboot -i 0x2A96 devices
- fastboot -i 0x2A96 oem unlock
And always I receive the same error:
FAILED (remote: oem unlock is not allowed)
Even after rooting the phone using KingRoot I got the same error. I had enabled OEM unlocking in Developer options. Please help! I wish to take back up of current ROM and flash CM13 snapshot released for Yu Yuphoria.

Softwarelord said:
Don't use cmd from -fastboot use fastboot -i0x2A96 oem unlock
Click to expand...
Click to collapse
Same herr

LakhveerS said:
Same herr
Click to expand...
Click to collapse
fastboot -i 0x2A96 oem unlock
use this cmd

yu 5010 A , no need to unlock bootloader, it is already unlocked by company. if you flash cyanogen mod 13 on yu5010a, it will locked again.
---------- Post added at 07:57 PM ---------- Previous post was at 07:54 PM ----------
just flash customrecovery like twrp, then flash your rom.

Softwarelord said:
Don't use cmd from -fastboot use fastboot -i0x2A96 oem unlock
Click to expand...
Click to collapse
Still not working!

akash.kansara96 said:
According to various posts, I tried the following commands to unlock the bootloader of my phone:
- fastboot -i 0x2A96 devices
- fastboot -i 0x2A96 oem unlock
And always I receive the same error:
FAILED (remote: oem unlock is not allowed)
Even after rooting the phone using KingRoot I got the same error. I had enabled OEM unlocking in Developer options. Please help! I wish to take back up of current ROM and flash CM13 snapshot released for Yu Yuphoria.
Click to expand...
Click to collapse
did u solve it , m also stuck

nop its not unlocked i did the same but stuck in bootloop
panuganties said:
yu 5010 A , no need to unlock bootloader, it is already unlocked by company. if you flash cyanogen mod 13 on yu5010a, it will locked again.
---------- Post added at 07:57 PM ---------- Previous post was at 07:54 PM ----------
just flash customrecovery like twrp, then flash your rom.
Click to expand...
Click to collapse
I did the same and yuphoria stuck in bootloop bcz bootloader was not unlocked.and had to visit sercvice centre and they had given me the time of one week but it took nearly 24 days to give it to me?

Related

OEM unlock not appearing in developer options.

I cant seem to find the unlock OEM option at all in the developer options. I tried to add images to show my problems but was not allowed to....sigh. Either way I cannot see the OEM option in my phone.
Model: MHA-AL00
Build: MHA-AL00C00B156
This is what I get after flashing TWRP with no issues and trying to reboot into recovery.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot TWRP.img
downloading 'boot.img'...
OKAY [ 0.464s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.471s
Any help would be greatly appreciated.
Chinese firmware doesn't have oem unlock option.
Did you unlock bootloader?
gm007 said:
Chinese firmware doesn't have oem unlock option.
Did you unlock bootloader?
Click to expand...
Click to collapse
Yes I did. I can't seem to figure out what to do next. It shows to me that the twrp recovery has been installed but when i go to it it comes up with the recovery from the huawei. So i can't flash anything.
So if it doesn't have the OEM option to unlock can I not install recovery or root the handset?
Without the phone plugged,hold volume up and power till u see the logo, release power while keeping volume up pressed.
try this
shut down phone
press vol up + power
when saw the huawei logo
release all buttons
wait
done
u r in twrp
GH04ST said:
I cant seem to find the unlock OEM option at all in the developer options. I tried to add images to show my problems but was not allowed to....sigh. Either way I cannot see the OEM option in my phone.
Model: MHA-AL00
Build: MHA-AL00C00B156
This is what I get after flashing TWRP with no issues and trying to reboot into recovery.
C:\Program Files (x86)\Minimal ADB and Fastboot>fastboot boot TWRP.img
downloading 'boot.img'...
OKAY [ 0.464s]
booting...
FAILED (remote: Command not allowed)
finished. total time: 0.471s
Any help would be greatly appreciated.
Click to expand...
Click to collapse
fastboot boot is not supported. try the keys combination
Fastboot boot twrp.img would not flash twrp, what it tries is downloading twrp.img then boot it without flashing.
I'm not sure how it is for the Chinese Mate 9s, but you'd want 'fastboot flash recovery twrp.img', that flashes twrp (if your twrp is named twrp.img).
If it says it flashed twrp, try 'adb reboot recovery'.
Never flash recovery to boot partition.
For recovery : "fastboot flash recovery twrp.img"
gm007 said:
Never flash recovery to boot partition.
For recovery : "fastboot flash recovery twrp.img"
Click to expand...
Click to collapse
Yikes, thanks for noticing. I'm tired. Edited
Thank you so much. It greatly helped.
hello
GH04ST said:
Yes I did. I can't seem to figure out what to do next. It shows to me that the twrp recovery has been installed but when i go to it it comes up with the recovery from the huawei. So i can't flash anything.
Click to expand...
Click to collapse
Are you unlocked it without click that oem unlock??
I also have mate 9china version I can not assign root if you succeeded without oem un
ante0 said:
Yikes, thanks for noticing. I'm tired. Edited
Click to expand...
Click to collapse
OEM Unlock
GH04ST said:
Yes I did. I can't seem to figure out what to do next. It shows to me that the twrp recovery has been installed but when i go to it it comes up with the recovery from the huawei. So i can't flash anything.
Click to expand...
Click to collapse
Were you able to unlock the bootloader of your Mate 9, MHA-AL00?
In my Developer Options there is no "OEM Unlocking"
Model: MHA-AL00
Build: MHA-AL00C00B213
I've been trying for days and I can not because the error always appears:
...
FAILED (remote: command not allowed)
Finished. Total time: 0.031s.
Do you or anyone that else got were can help me out?
Thanks
tigrelouco said:
Were you able to unlock the bootloader of your Mate 9, MHA-AL00?
In my Developer Options there is no "OEM Unlocking"
Model: MHA-AL00
Build: MHA-AL00C00B213
I've been trying for days and I can not because the error always appears:
...
FAILED (remote: command not allowed)
Finished. Total time: 0.031s.
Do you or anyone that else got were can help me out?
Thanks
Click to expand...
Click to collapse
Are you using "fastboot flash recovery twrp.img" or "fastboot boot twrp.img"? The boot command is not allowed.
ante0 said:
Are you using "fastboot flash recovery twrp.img" or "fastboot boot twrp.img"? The boot command is not allowed.
Click to expand...
Click to collapse
I'm still trying to unlock the bootloader using the command prompt and ADB and Fastboot, after I got the Huawei code:
Step-1: Open the command prompt and enter the following command.
Adb reboot bootloader
Step-2: Your phone will reboot and enter into bootloader mode.
Step-3: Now enter the following command to finally unlock the bootloader.
Fastboot oem unlock xxxxxxxxxxxxxxxxxxxx
And it always fails.
I do not know how to use "fastboot flash recovery twrp.img" or "fastboot boot twrp.img".
Do you have a guide how should I do it?
tigrelouco said:
I'm still trying to unlock the bootloader using the command prompt and ADB and Fastboot, after I got the Huawei code:
Step-1: Open the command prompt and enter the following command.
Adb reboot bootloader
Step-2: Your phone will reboot and enter into bootloader mode.
Step-3: Now enter the following command to finally unlock the bootloader.
Fastboot oem unlock xxxxxxxxxxxxxxxxxxxx
And it always fails.
I do not know how to use "fastboot flash recovery twrp.img" or "fastboot boot twrp.img".
Do you have a guide how should I do it?
Click to expand...
Click to collapse
You can done follow this link.
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
---------- Post added at 07:31 AM ---------- Previous post was at 07:30 AM ----------
tigrelouco said:
I'm still trying to unlock the bootloader using the command prompt and ADB and Fastboot, after I got the Huawei code:
Step-1: Open the command prompt and enter the following command.
Adb reboot bootloader
Step-2: Your phone will reboot and enter into bootloader mode.
Step-3: Now enter the following command to finally unlock the bootloader.
Fastboot oem unlock xxxxxxxxxxxxxxxxxxxx
And it always fails.
I do not know how to use "fastboot flash recovery twrp.img" or "fastboot boot twrp.img".
Do you have a guide how should I do it?
Click to expand...
Click to collapse
command for unlock via cmd
fastboot oem unlock xxxxxxxxxxxxxxxx
You can done follow this link.
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
newyesor said:
You can done follow this link.
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
---------- Post added at 07:31 AM ---------- Previous post was at 07:30 AM ----------
command for unlock via cmd
fastboot oem unlock xxxxxxxxxxxxxxxx
You can done follow this link.
https://www.howtogeek.com/239798/how-to-unlock-your-android-phones-bootloader-the-official-way/
Click to expand...
Click to collapse
But he says it fails every time.
@tigrelouco
Open a terminal or adb shell and enter these commands:
getprop sys.oem_unlock_allowed
getprop ro.oem_unlock_supported
And post results.
Found this in another thread:
tohc1 said:
To answer my own problem/ for anyone else having problems it is necessary to remove the factory reset protection (frp) to do this you need to remove all pin/password/fingerprint locks, then remove all google accounts and finally do a factory reset.
Then the usual adb/fastboot commands work fine.
As linux33it says the bootloader can be unlocked without the option in the developer options.
Click to expand...
Click to collapse
Might be of help.
ante0 said:
But he says it fails every time.
@tigrelouco
Open a terminal or adb shell and enter these commands:
getprop sys.oem_unlock_allowed
getprop ro.oem_unlock_supported
And post results.
Found this in another thread:
Might be of help.
Click to expand...
Click to collapse
And how do I open a Shell command?
tigrelouco said:
And how do I open a Shell command?
Click to expand...
Click to collapse
Download Terminal emulator from the playstore or use adb from command prompt.
By the way, you dont happen to use Linux?

[RECOVERY][TWRP][Unofficial][Port][ROOT] Ulefone T1

This is a ported TWRP that I put together from another MTK6757 recovery that was twrp ready. I have only used it so far to root my device. I am not responsible for any harm to your device.
1) Backup your phone.
2) Unlock Bootloader (!! YOU ARE WIPING EVERYTHING ON YOUR PHONE !!)
3) fastboot boot recovery-20170912-t1-twrp
4) Swipe modify system partition
5) Install desired root method (I installed Magisk here.)
6) You phone will be back to factory, with root installed.
Enjoy!
Succeeded
Thank you ^ ^
Open CMD (command prompt) and type the next command :
adb reboot bootloader (and press enter)
Now type the next command :
fastboot boot c:\adb\recovery.img (and press enter)
**I installed Magisk but magisk hide not wroking!!! **Why??
how did you get the t1 in too fastboot boot
deanlee121 said:
how did you get the t1 in too fastboot boot
Click to expand...
Click to collapse
Enable USB debugging...
Run: adb reboot bootloader
arcane47 said:
Enable USB debugging...
Run: adb reboot bootloader
Click to expand...
Click to collapse
i have it in fastboot now but when i try to flash twrp i get error: cannot load 'twrp.img
---------- Post added at 08:45 PM ---------- Previous post was at 08:30 PM ----------
lol now i am geting Permission denied
deanlee121 said:
lol now i am geting Permission denied
Click to expand...
Click to collapse
You didn't unlock bootloader:
fastboot oem unlock (This will wipe your data after rebooting)
ok so i got it all working right down to where you flash recovery but when i try to boot to recovery just goes black then reboots thansk for any help think i am going up now lol
thank you got it working
kim wongyu said:
Succeeded
Thank you ^ ^
Open CMD (command prompt) and type the next command :
adb reboot bootloader (and press enter)
Now type the next command :
fastboot boot c:\adb\recovery.img (and press enter)
**I installed Magisk but magisk hide not wroking!!! Why??
Click to expand...
Click to collapse
Ulefone t1
Any custom rom?
Ulefone t1 bootloader
Hello guys I have the latest version of ulefone t1 firmware and I flashed the custome recovery successfully to the phone but I can't enter the recovery + I don't know how to unlock bootloader. Any help ?
iroxor said:
Hello guys I have the latest version of ulefone t1 firmware and I flashed the custome recovery successfully to the phone but I can't enter the recovery + I don't know how to unlock bootloader. Any help ?
Click to expand...
Click to collapse
I only just got my T1 and this is my first time using it but under "Developer options" in settings of the device there is an option for "OEM unlocking". Googling that the first result says "OEM Unlock is a protective in Android Lollipop and later that is usually a step that users need to enable in order to officially unlock the bootloader of their device." Hopefully that helped.
Dizioboy said:
I only just got my T1 and this is my first time using it but under "Developer options" in settings of the device there is an option for "OEM unlocking". Googling that the first result says "OEM Unlock is a protective in Android Lollipop and later that is usually a step that users need to enable in order to officially unlock the bootloader of their device." Hopefully that helped.
Click to expand...
Click to collapse
Hello i already unlocked OEM + running Ulefone T1 version 20170912 but still cant go into recovery :/
iroxor said:
Hello i already unlocked OEM + running Ulefone T1 version 20170912 but still cant go into recovery :/
Click to expand...
Click to collapse
I am now having he same issue. I can boot TWRP remotely but SuperSU didn't work and I can not access the recovery any other way :/
Dizioboy said:
I am now having he same issue. I can boot TWRP remotely but SuperSU didn't work and I can not access the recovery any other way :/
Click to expand...
Click to collapse
Hello, can you tell me what version of ulefone rom & TWRP are you using? thanks
iroxor said:
Hello, can you tell me what version of ulefone rom & TWRP are you using? thanks
Click to expand...
Click to collapse
My version is 2017/08/03
kim wongyu said:
Succeeded
Thank you ^ ^
Open CMD (command prompt) and type the next command :
adb reboot bootloader (and press enter)
Now type the next command :
fastboot boot c:\adb\recovery.img (and press enter)
**I installed Magisk but magisk hide not wroking!!! **Why??
Click to expand...
Click to collapse
Hello, I installed magisk and It works... But with this method "fastboot boot c:\adb\recovery.img (and press enter)" recovery is on PC and If I try "adb reboot recovery" the phone reboot on a black display and after I reboot in normal mode !!!.
And of course, the power+ vol up doesn't work.
Wonder when they will actually create a thread for this phone.
I have the following problem:
PS C:\adb> adb reboot bootloader
PS C:\adb> fastboot boot c:\adb\recovery.img
downloading 'boot.img'...
OKAY [ 0.605s]
booting...
FAILED (remote: not allowed in locked state)
finished. total time: 0.609s
OEM unlock enabeld
USB debugging enabeld
Running currently rom P15_GQ3039LF1_Ulefone_T1_V05_20171030
---------- Post added at 12:17 PM ---------- Previous post was at 11:23 AM ----------
sawo69 said:
I have the following problem:
PS C:\adb> adb reboot bootloader
PS C:\adb> fastboot boot c:\adb\recovery.img
downloading 'boot.img'...
OKAY [ 0.605s]
booting...
FAILED (remote: not allowed in locked state)
finished. total time: 0.609s
OEM unlock enabeld
USB debugging enabeld
Running currently rom P15_GQ3039LF1_Ulefone_T1_V05_20171030
Click to expand...
Click to collapse
Found a solution needed give the commando:
fastboot oem unlock
So the steps should be:
1 adb reboot bootloader
2 fastboot oem unlock
3 fastboot boot c:\adb\recovery.img
sawo69 said:
I have the following problem:
PS C:\adb> adb reboot bootloader
PS C:\adb> fastboot boot c:\adb\recovery.img
downloading 'boot.img'...
OKAY [ 0.605s]
booting...
FAILED (remote: not allowed in locked state)
finished. total time: 0.609s
OEM unlock enabeld
USB debugging enabeld
Running currently rom P15_GQ3039LF1_Ulefone_T1_V05_20171030
---------- Post added at 12:17 PM ---------- Previous post was at 11:23 AM ----------
Found a solution needed give the commando:
fastboot oem unlock
So the steps should be:
1 adb reboot bootloader
2 fastboot oem unlock
3 fastboot boot c:\adb\recovery.img
Click to expand...
Click to collapse
Did this work for you and have you had any issues with your device at all? This is my first MTK device so I want to make sure it's all good. Seems almost too easy compared to rooting and unlocking my Xiaomi devices
When I enter the cmd fastboot reboot bootloader, all I get when the phone reboots is "bootloader mode...." in the lower left corner. When I type fastboot oem unlock all I get it "waiting for device"

[Guide] Unlocking Red Magic 3's Bootloader

Requirements:
- To Unlock Bootloader On Nubia Red Magic 3 (NX629J), you will need a computer.
- Charge the Nubia Red Magic to at least 50%.
- You need a USB cable to connect your phone to PC. (Users reported better luck with usb 2.0 port vs usb 3.0.)
Connect your rm3 to your windows 10 pc without developer options enabled. It will be a cd drive, and you can double click it to install the usb drivers
1) Enable the Developer Options
- To Enable Developer Options, Go to your Settings -> About -> Software Information -> More -> Now Tap on the Build Number 10 Times until you see a toast message “Developer options enabled“
2) Go back to settings -> Now you need to enable the OEM Unlock by going to Settings -> Developer Options and check the box for OEM Unlock and USB Debugging
3) Connect your phone to Computer using USB Cable.
4) Open a command prompt window on your computer and type: "adb devices"
5) You will see a pop up window on your phone to allow USB Debugging on your phone. Click ok.
6) Now type the commannd "adb reboot bootloader"
7) Once your phone has rebooted into it's bootloader, type in the command prompt "fastboot devices". This will list the devices connected, your phone should show up.
8) Then, enter "fastboot oem nubia_unlock NUBIA_NX629J"
9) Then enter "fastboot flashing unlock"
9) Finally type "fastboot reboot" into the command prompt.
10) From here you can install twrp, root your phone, etc.
TO RELOCK BOOTLOADER Restart into fastboot on your phone, and use the commands:
"fastboot oem lock"
"fastboot flashing lock"
"fastboot oem relock"
https://imgur.com/pZR4KkL
Thx..now wait for custom rom
twrp here
---------- Post added at 05:44 PM ---------- Previous post was at 04:45 PM ----------
Nubia red magic 3 twrp here
---------- Post added at 05:44 PM ---------- Previous post was at 05:44 PM ----------
https://drive.google.com/file/d/10CZYW-C1scN30y6xxYYCx5lV_eSMwamG/view?usp=drivesdk
sandeepkhatri said:
Plz share twrp here
---------- Post added at 05:44 PM ---------- Previous post was at 04:45 PM ----------
Nubia red magic 3 twrp here
---------- Post added at 05:44 PM ---------- Previous post was at 05:44 PM ----------
https://drive.google.com/file/d/10CZYW-C1scN30y6xxYYCx5lV_eSMwamG/view?usp=drivesdk
Click to expand...
Click to collapse
Thank you for sharing it! I had no clue how to download it from Baidu!
Always welcome friend
Fastboot flashing unlock does not work for me, its not recognizing the command.
SmartViewYTC said:
Fastboot flashing unlock does not work for me, its not recognizing the command.
Click to expand...
Click to collapse
You did fastboot oem unlock first, and then fastboot flashing unlock?
Yep, sadly, same result :/
UPDATE:
FIXED BY USING A USB 2 PORT!!!
Hello guys is there any way to relock bootloader?
It work perfect but remember it delete all of your personal information
aKs. said:
Hello guys is there any way to relock bootloader?
Click to expand...
Click to collapse
Sorry, I was on vacation. fastboot flashing lock in fastboot should work to relock it.
Secretcow said:
Sorry, I was on vacation. fastboot flashing lock in fastboot should work to relock it.
Click to expand...
Click to collapse
Can you confirm this with the global edition?
This command is not working on me.
9) Then enter "fastboot flashing unlock"
Tried different ports on my PC.
mhex said:
This command is not working on me.
9) Then enter "fastboot flashing unlock"
Tried different ports on my PC.
Click to expand...
Click to collapse
Try first "fastboot oem nubia_unlock NUBIA_NX629J"
then "fastboot flashing unlock"
Can you please help me, I want to flash to Global ROM again, But i have this Package Failure errorm
mhex said:
Can you please help me, I want to flash to Global ROM again, But i have this Package Failure errorm
Click to expand...
Click to collapse
Sure thing! I'm assuming you have access to fastboot & are using windows.
Download the right global rom for your phone: https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
Once you've downloaded the rom, extract the folder. Use the following commands.
cd "path of folder" (example: "cd C:\Users\Worldchamp\Downloads\NX629J_Z69_EN_WPJ0O_V111") - dont use the quotation marks.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
Thanks
Secretcow said:
Sure thing! I'm assuming you have access to fastboot & are using windows.
Download the right global rom for your phone: https://eu.redmagic.gg/blogs/news/red-magic-3-global-rom-flash-instructions
Once you've downloaded the rom, extract the folder. Use the following commands.
cd "path of folder" (example: "cd C:\Users\Worldchamp\Downloads\NX629J_Z69_EN_WPJ0O_V111") - dont use the quotation marks.
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash parameter parameter.img
fastboot reboot
fastboot oem nubia_unlock NUBIA_NX629J
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash splash splash.img
fastboot flash modem NON-HLOS.bin
fastboot flash system system.img
fastboot reboot
Click to expand...
Click to collapse
So what I do if there is no system.img after extracting to flash?
So anyone make any custom rom this gaming beast
On global rom, the fastboot flashing unlock does not work... even if i change ports from 3.0 to 2.0... The TWRP is available only for China rom ? On Global does not work ?
LE: Make sure you have latest ADB Drivers 1.43, after i updated to these, the flashing unlocked worked

Razer phone Android 9.0 Pie cheryl-P-Magisk-twrp-boot

This boot comes with twrp and Magisk
Fastboot command :
fastboot flash boot_a cheryl-P-Magisk-twrp-boot.img
fastboot flash boot_b cheryl-P-Magisk-twrp-boot.img
fastboot reboot
download
https://drive.google.com/file/d/1VbmtVm3OGLxXYZ92YOOxsQkoyuOvi91_/view?usp=sharing
Thanks @将军和妓 Making a boot file
Twrp is working for me but not Magisk, I had to flash it via recovery. Thank you very much for sharing
MusTangKKK said:
This boot comes with twrp and Magisk
Fastboot command :
fastboot flash boot_a cheryl-P-Magisk-twrp-boot.img
fastboot flash boot_b cheryl-P-Magisk-twrp-boot.img
fastboot reboot
download
https://drive.google.com/file/d/1VbmtVm3OGLxXYZ92YOOxsQkoyuOvi91_/view?usp=sharing
Thanks @将军和妓 Making a boot file
Click to expand...
Click to collapse
I tried with fastboot boot cheryl-P-Magisk-twrp-boot.img and nothing happened.
I'll try properly flashing the image when I have the time to make a backup.
Anyone has been able to backup the clean Pie boot.img ?
EDIT: Tried flashing the boot image and it bootloops. Maybe device encription has to be disabled for twrp to work?
thank you so much for this
I worked after I flashed my phone to 7.1.1 and updated to 9 but when I did it again and after updated did a wipe(just going into the setting and wiping) I couldn't flash part b of the boot just got an error
:tools root# ./fastboot flash boot_a cheryl-P-Magisk-twrp-boot.img
Sending 'boot_a' (26840 KB) OKAY [ 0.840s]
Writing 'boot_a' OKAY [ 3.657s]
Finished. Total time: 4.503s
:tools root# ./fastboot flash boot_B cheryl-P-Magisk-twrp-boot.img
Sending 'boot_B' (26840 KB) OKAY [ 0.659s]
Writing 'boot_B' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
(EDIT: I'm retarded didn't notice the uppercase B but it seem they really didn't care of Gen1)
If you can't get into the system, you can go in twrp to restore factory settings and then restart, you can enter the system
MusTangKKK said:
If you can't get into the system, you can go in twrp to restore factory settings and then restart, you can enter the system
Click to expand...
Click to collapse
No everything is working just notice it said Razer 2
Djcall11 said:
No everything is working just notice it said Razer 2
Click to expand...
Click to collapse
This boot only supports Razer phone 1
[/LIST]
[/LIST]
MusTangKKK said:
If you can't get into the system, you can go in twrp to restore factory settings and then restart, you can enter the system
Click to expand...
Click to collapse
MusTangKKK said:
This boot only supports Razer phone 1
Click to expand...
Click to collapse
My guy only Razer 1 has 7.1.1 I just seen this after I reset after updating to pie everything I fine thank or care doe
I made the mistake of trying to get into recovery after this update using the Volume + plug in USB-C. (Update removed root/Magisk of course). It then wiped my entire device!!! No warning. No recovery screen. Just a message saying wiping device.
I immediately wiped it to put Lineage on it.
waiflih said:
I tried with fastboot boot cheryl-P-Magisk-twrp-boot.img and nothing happened.
I'll try properly flashing the image when I have the time to make a backup.
Anyone has been able to backup the clean Pie boot.img ?
EDIT: Tried flashing the boot image and it bootloops. Maybe device encription has to be disabled for twrp to work?
Click to expand...
Click to collapse
You need to make a copy of the flash all batch file and edit it and take out the line that reads "erase userdata" save the file. What this will do is make the factory image skip factory reset if you want to keep your files but wanna restore to fix or whatever.
---------- Post added at 10:03 AM ---------- Previous post was at 09:59 AM ----------
MusTangKKK said:
This boot comes with twrp and Magisk
Fastboot command :
fastboot flash boot_a cheryl-P-Magisk-twrp-boot.img
fastboot flash boot_b cheryl-P-Magisk-twrp-boot.img
fastboot reboot
download
https://drive.google.com/file/d/1VbmtVm3OGLxXYZ92YOOxsQkoyuOvi91_/view?usp=sharing
Thanks @将军和妓 Making a boot file
Click to expand...
Click to collapse
So i flashed this and i also even tried flashing twrp and magisk like normal but after i would boot, most apps would not load. Im currently reverted to 8 to figure this out. If you could help me figure out what is wrong, would be appreciated.
Guys am running android 9 on razer phone 1 and bootloader unlocked. However keep getting error write to device failed. Any advise please?
marvi0 said:
Guys am running android 9 on razer phone 1 and bootloader unlocked. However keep getting error write to device failed. Any advise please?
Click to expand...
Click to collapse
Any suggestions?
marvi0 said:
Guys am running android 9 on razer phone 1 and bootloader unlocked. However keep getting error write to device failed. Any advise please?
Click to expand...
Click to collapse
Do you have both parts of the bootloader unlocked?
iliais347 said:
Do you have both parts of the bootloader unlocked?
Click to expand...
Click to collapse
hello buddy. Aaa you might be onto something. I am afraid I don't have my phone with me now. How do I check though if I have both parts of the bootloader unlocked?
marvi0 said:
hello buddy. Aaa you might be onto something. I am afraid I don't have my phone with me now. How do I check though if I have both parts of the bootloader unlocked?
Click to expand...
Click to collapse
Try fastboot oem device-info
---------- Post added at 03:55 AM ---------- Previous post was at 03:29 AM ----------
marvi0 said:
hello buddy. Aaa you might be onto something. I am afraid I don't have my phone with me now. How do I check though if I have both parts of the bootloader unlocked?
Click to expand...
Click to collapse
But fyi, the razer phone has two parts to the bootloader. One is unlocked with
"Fastboot flashing unlock"
And the other is
"Fastboot flashing unlock_critical" i believe
iliais347 said:
Try fastboot oem device-info
---------- Post added at 03:55 AM ---------- Previous post was at 03:29 AM ----------
But fyi, the razer phone has two parts to the bootloader. One is unlocked with
"Fastboot flashing unlock"
And the other is
"Fastboot flashing unlock_critical" i believe
Click to expand...
Click to collapse
Oh so I need to unlock both? Thanks will check this tonight
After install can't open music file on extened memory, usb otg
iliais347 said:
Try fastboot oem device-info
---------- Post added at 03:55 AM ---------- Previous post was at 03:29 AM ----------
But fyi, the razer phone has two parts to the bootloader. One is unlocked with
"Fastboot flashing unlock"
And the other is
"Fastboot flashing unlock_critical" i believe
Click to expand...
Click to collapse
Please can someone else confirm this please before I go ahead as I don't want to risk it?
marvi0 said:
Please can someone else confirm this please before I go ahead as I don't want to risk it?
Click to expand...
Click to collapse
Yes you need to unlock both and each command will also do a factory reset so backup anything you may need on the internal storage.
This is working great for me. Thanks
Sent from my Phone using Tapatalk

Volte Not Come in Mi S2

When May bounced in Mui 10 and then came back in Mui 11, my vote is not coming.
Please Help me Anbody
Redmi y2/s2 volte fix
[I assume u hav an unlocked bootloader]
The problem is due to corrupt baseband firmware...
Just download dummy.img from fastboot firmware miui 11.0.2.0 pefmixm
Paste it in your fastboot folder.
Open a command window in your fastboot folder.
Enable devoloper options in your phone.
Connect the phone to pc in fastboot mode.
Enter these commands:
Fastboot devices
Fastboot flash modemst1 dummy.img
Fastboot flash modemst2 dummy.img
Reboot and enjoy volte
Note: this is what i have tried before...
1.Rebooting..
2.Factory reset..
3.Flashing miui global stable(10.2.1.0, 10.3.2, 10.3.5 etc) via fastboot and twrp
4.Installed lineage 16 custom rom
5.Enter engineering mode and changing bands to "only LTE" mode (it worked but temporary fix)
If it doesn't work, try flashing dummy.img from diff fastboot firmware.
Where is dummy img... For mi s2
Where is dummy img for mi s2
jagadeesh0074 said:
Redmi y2/s2 volte fix
[I assume u hav an unlocked bootloader]
The problem is due to corrupt baseband firmware...
Just download dummy.img from fastboot firmware miui 11.0.2.0 pefmixm
Paste it in your fastboot folder.
Open a command window in your fastboot folder.
Enable devoloper options in your phone.
Connect the phone to pc in fastboot mode.
Enter these commands:
Fastboot devices
Fastboot flash modemst1 dummy.img
Fastboot flash modemst2 dummy.img
Reboot and enjoy volte
Note: this is what i have tried before...
1.Rebooting..
2.Factory reset..
3.Flashing miui global stable(10.2.1.0, 10.3.2, 10.3.5 etc) via fastboot and twrp
4.Installed lineage 16 custom rom
5.Enter engineering mode and changing bands to "only LTE" mode (it worked but temporary fix)
If it doesn't work, try flashing dummy.img from diff fastboot firmware.
Click to expand...
Click to collapse
Where is dummy img for mi s2
Any link
jagadeesh0074 said:
Redmi y2/s2 volte fix
[I assume u hav an unlocked bootloader]
The problem is due to corrupt baseband firmware...
Just download dummy.img from fastboot firmware miui 11.0.2.0 pefmixm
Paste it in your fastboot folder.
Open a command window in your fastboot folder.
Enable devoloper options in your phone.
Connect the phone to pc in fastboot mode.
Enter these commands:
Fastboot devices
Fastboot flash modemst1 dummy.img
Fastboot flash modemst2 dummy.img
Reboot and enjoy volte
Note: this is what i have tried before...
1.Rebooting..
2.Factory reset..
3.Flashing miui global stable(10.2.1.0, 10.3.2, 10.3.5 etc) via fastboot and twrp
4.Installed lineage 16 custom rom
5.Enter engineering mode and changing bands to "only LTE" mode (it worked but temporary fix)
If it doesn't work, try flashing dummy.img from diff fastboot firmware.
Click to expand...
Click to collapse
Any link any video .. big problem please help
Cant post outside links,
Give me ur mail id...
Mine is [email protected]
---------- Post added at 03:37 AM ---------- Previous post was at 03:36 AM ----------
Will create a video or detailed blog soon... Just mail me
My email id
jagadeesh0074 said:
Cant post outside links,
Give me ur mail id...
Mine is [email protected]
---------- Post added at 03:37 AM ---------- Previous post was at 03:36 AM ----------
Will create a video or detailed blog soon... Just mail me
Click to expand...
Click to collapse
My gmail I'd [email protected]
jagadeesh0074 said:
Cant post outside links,
Give me ur mail id...
Mine is [email protected]
Please fast create a video. Is big problem please solve this..
---------- Post added at 03:37 AM ---------- Previous post was at 03:36 AM ----------
Will create a video or detailed blog soon... Just mail me
Click to expand...
Click to collapse
Fast create a video . Is big problem please solve this problem
Yes it did work for me
---------- Post added at 05:58 AM ---------- Previous post was at 05:51 AM ----------
Vikas44u said:
Where is dummy img... For mi s2
Click to expand...
Click to collapse
"\Xiaomi_Redmi_Y2_V10.3.3.0.PEFMIXM_20190803.0000.00_Global_9.0_XFT\Firmware\images" This will be the folder where you will find the dummy img. You have to download the fastboot file first for mi y2. Hope you are clear if not tell me again. Link : - "https://firmwarefile.com/xiaomi-redmi-y2".
uploaded a video on this!
here is a easy and temporary solution:
jagadeesh0074 said:
Redmi y2/s2 volte fix
[I assume u hav an unlocked bootloader]
The problem is due to corrupt baseband firmware...
Just download dummy.img from fastboot firmware miui 11.0.2.0 pefmixm
Paste it in your fastboot folder.
Open a command window in your fastboot folder.
Enable devoloper options in your phone.
Connect the phone to pc in fastboot mode.
Enter these commands:
Fastboot devices
Fastboot flash modemst1 dummy.img
Fastboot flash modemst2 dummy.img
Reboot and enjoy volte
Note: this is what i have tried before...
1.Rebooting..
2.Factory reset..
3.Flashing miui global stable(10.2.1.0, 10.3.2, 10.3.5 etc) via fastboot and twrp
4.Installed lineage 16 custom rom
5.Enter engineering mode and changing bands to "only LTE" mode (it worked but temporary fix)
If it doesn't work, try flashing dummy.img from diff fastboot firmware.
Click to expand...
Click to collapse
This issue I had for years I can say.
Thank you very much bro!!

Categories

Resources