Database Info

will an HTC 7 Pro work with Page Plus?

I am from the Android world, zero experience with WP7 and I want to buy this exact phone and possibly flash a custom ROM
and the goal is to get this to work on Page Plus (Verizon MVNO) and NOT Sprint
the phone is currently set up for C-Spire - a smaller CDMA carrier in Mississippi (formerly Cellular South)
I have access to CDMA workshop and other CDMA tools, such as qpst
I need Verizon coverage and a REAL keyboard at a cheap price ($55/month) and this looks like it could be the ticket!

I had the same question and found a post from bing searches with someone claiming to have succeeded in activating it on Page Plus. Unfortunately the person never really detailed how he did it.
I'd still like to know how it can be done.

The Arrive can be flashed to P+. I'm using one on it. You'll need the paid CDMAWS, not the hacked version.
Also, before you do this, remember that the 3G will be intermittent. The reason for this is that you cannot upload the authentication file to the phone's file system, so the phone never gets true 3G, it cycles between connecting and 1XRTT. To make this work properly, you'll need to have a ROM loaded that's a direct port from the HTC Trophy, or an Arrive ROM that has the Verizon operator package in it. I've yet to learn how to do this, but as time permits, I'll figure it out. I've got a few requests in to ansar and leadpoizon, two ROM Chefs that are heavily involved in GOLD_C (our phone's) development here.
Here's what I did:
1. Put the phone in Diag Mode, using ##MFG# on the phone dialer and connect to CDMAWS.
2. Obtain your MSL/SPC by using the HTC Method, then write it to 000000.
3. Program the phone using CDMAWS just as you would an android device; put in MIN, MDN and set your data settings to your#@vzw3g.com.
4. Load a modded PRL to put the phone on Verizon's Towers, and lose the roam triangle. (Attached)
5. Call P+ and give them the MEID of the Arrive. They'll tell you to do *22890, but do NOT do it.
6. Once they say it's active, make a test call, and enjoy your Arrive.
The steps above will give you voice calls, SMS, and spotty 3G. MMS will not work, unless you hack the registry of the phone. The phone works great with WiFi, though.
If you're brave, try forcing the phone into 1X by finding a non-EvDo PRL. You'll be showing that you're roaming, but it may yield better data results. If you do set 1X though, be sure to set MIP type (in CDMAWS) to Simple IP.
Post here w/ questions, if you have any...

Verizon S3 / S4 / S5 / Note 2 / Note 3 to Page Plus Flashing with 3G

I want this to be a thread dedicated to help others to flash the mentioned devices to Page Plus / Selectel / Next-G / Service in REAL 3G....
I have been flashing phones for a several years now as a hobby and want to pass on some of my knowledge and advice to others making this transition.
A few things I want to do when time allows as I work a full time job and have a family.. (Not to mention my Flashing Phone Hobby)
1. Keep a list of PRL's that work with Page Plus with no roaming symbol...
2. Maintain a summary of how to get into Diag Mode on all phones and methods to get your SPC/MSL on Sprint Phones......
3. Post useful Apks,, 16 Digit Passwords, and other instructions on flashing the phones.......
4. Maintain a Current List of Page plus Sids for Flashing..........
5. Make this a thread that people can come to and discuss issues etc....
Now I am not good at writing Guides and truthfully at this time have no desire to do so, but I will however try my best to help you along the way when my time is available. So please I ask do not flood my Inbox with request for a guide etc. (Post here so others can contribute and everyone can learn together)
One thing I have learned over the years of flashing devices is its better to think it through and work by trial and error so you can truly learn the skill of performing successful flashes.
(Please everyone keep it civil and make this a community effort to help each and everyone)
Current Status is that I can pull Keys/Passwords on Verizon S3 / S4 / Note 2, Sprint S2 / S3 /S4 / Note 2, US Cellular S2 / S3 / S4 and Note 2 phones, Plus several other Phones and get REAL 3G with no donor on Page Plus / Selectel / Next-G....
(Again let me stress, please do not flood me with request to show you how to do this, as currently I will not post this information, I have my reasons and I hope you can respect that and use this thread for the other benefits you can get from it)
** Note: I did not include Verizon Prepaid or Straight Talk in this due to my beliefs that the cloning of esns/meids to obtain service is not LEGAL **
Viper

Page Plus Sid List
https://www.dropbox.com/s/o4yatnkv7g6lwm5/PagePlusSIDList.xls
16 Digit Passwords:
USCC S3 / S4 / S5 /Note 2 / Note 3 2010031619780721
USSC Note 3 (Kit Kat) 2013051320130909
Verizon S3 / S4 / S5/ Note 2 / Note 3 2009031920090615
Sprint S3 01F2030F5F678FF9 or 2012112120131219
Sprint S4 / S5 2012112120131219
Sprint Note 2 / Note 3 2012112120131219
Metro PCS S3 2FF811282FF9F323
Cricket S3: 2010031619780721
Cricket S4: 01F2030F5F678FF9
Gusto (Friend) U365 2011101116083112
Working PRL's by Original Carrier phone:
Sprint
60009 PRL Latest Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/i6659mf3vo1xbuy/60009.prl
60008 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/nnykb969xd9daz1/60008.prl
60007 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/7upnkzpi41u2kf1/60007.prl
65002 PRL Most Popular https://www.dropbox.com/s/hfw92t2r3i8icfn/65002.prl
52874 PRL https://www.dropbox.com/s/rrpkxqwhk5khtpw/52874-page-plus-sprint-phones.prl
52896 PRL https://www.dropbox.com/s/r47fa53i32c3596/52896-page-plus-sprint-phones.prl
59317 PRL https://www.dropbox.com/s/6svp8p8qcqhk5ea/59317 sprint modified.prl
65005 PRL Modded PRL https://www.dropbox.com/s/1mkxmv4mox6hzw0/65005.prl
53263 PRL Selectel Latest (Not Modded) https://www.dropbox.com/s/734mz0pj0wng0ws/53263Selectel.prl
53269 PRL Page Plus Latest (Not Modded) https://www.dropbox.com/s/fphctk79gf7k0cd/53269PPlus.prl
Verizon
60009 PRL Latest Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/i6659mf3vo1xbuy/60009.prl
60008 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/nnykb969xd9daz1/60008.prl
60007 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/7upnkzpi41u2kf1/60007.prl
65002 PRL Most Popular https://www.dropbox.com/s/hfw92t2r3i8icfn/65002.prl
53078 PRL https://www.dropbox.com/s/1nd3erjcpkym55v/53078.prl
53126 PRL https://www.dropbox.com/s/u1i4w9kqfj609fr/53126verizon.prl
53188 PRL https://www.dropbox.com/s/l9rqhbvrgqiochc/53188verizon.prl
53160 Selectel PRL https://www.dropbox.com/s/vc0i0pea8igr78d/53160.prl
65005 PRL Modded PRL https://www.dropbox.com/s/1mkxmv4mox6hzw0/65005.prl
53263 PRL Selectel Latest (Not Modded) https://www.dropbox.com/s/734mz0pj0wng0ws/53263Selectel.prl
53269 PRL Page Plus Latest (Not Modded) https://www.dropbox.com/s/b41fbuimja5dw9y/53269-page-plus-sprint-phones.prl
US Cellular
60009 PRL Latest Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/i6659mf3vo1xbuy/60009.prl
60008 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/nnykb969xd9daz1/60008.prl
60007 PRL Modded Verizon PRL All Carrier Phones https://www.dropbox.com/s/7upnkzpi41u2kf1/60007.prl
65002 PRL Most Popular https://www.dropbox.com/s/hfw92t2r3i8icfn/65002.prl
52874 PRL https://www.dropbox.com/s/rrpkxqwhk5khtpw/52874-page-plus-sprint-phones.prl
59317 PRL https://www.dropbox.com/s/6svp8p8qcqhk5ea/59317 sprint modified.prl
65005 PRL Modded PRL https://www.dropbox.com/s/1mkxmv4mox6hzw0/65005.prl
53263 PRL Selectel Latest (Not Modded) https://www.dropbox.com/s/734mz0pj0wng0ws/53263Selectel.prl
53269 PRL Page Plus Latest (Not Modded) https://www.dropbox.com/s/b41fbuimja5dw9y/53269-page-plus-sprint-phones.prl
What is a PRL and what it does:
PRL=(Preferred Roaming List)
The PRL is a list of information that resides in the memory of some kinds of digital phones. It lists the radio frequencies the phone can use in various geographic areas.
The part of the list for each area is ordered by the bands the phone should try to use first. Therefore it's a kind of priority list for which towers the phone should use.
The PRL helps determine which home-network towers to use, and also which towers belonging to other networks to use in roaming situations (areas where the home network
has no coverage.) When roaming, the PRL may instruct the phone to use the network with the best roaming rate for the carrier, rather than the one with the strongest signal at the moment.
Since a PRL tells the phone "where" to search for a signal, as carrier networks change over time, an updated PRL may be required for a phone to "see" all of the coverage that it should,
both with the home network and for roaming.
10.key if needed:
10.key https://www.dropbox.com/s/ybyi51lodiislt5/10.key
PagePlus APN:
https://www.dropbox.com/s/h81z8am5pk0tr7g/apnpageplus.zip
The Best MMS Apk by far fully Flash Compatible
Version 1.31: http://8s.ms/download/releases/8sms-1.31.apk
Read all about it: (I have tested works on all carrier phones)
http://8s.ms/
(Settings
Instructions Below:
Setup Instructions Below:
1) Launch 8sms app.
2) Press Menu button on your phone.
3) Choose Settings
4) Choose MMSC Settings
5) Press "MMSC".
6) Type in "http://mms.vtext.com/servlets/mms?X-VZW-MDN=Your Phone number including area code" do not include the double quotes. Press OK button. EXample: http://mms.vtext.com/servlets/mms?X-VZW-MDN=7792559415
7) Press "MMS PROXY".
8) Make it Blank
9) Press "MMS PORT".
10) Make it Blank
Press OK button.
Press the Phones Back Button
Choose Phone number under the extra settings and enter your 10 digit phone number then press the ok button.....
Restart the Phone.........
DONE..................
____________________________________________________________________________________________________________________
Working MMS Program:
USSC/Verizon MMS Messages (Must be on JB and up to use)
This MMS apk. will keep you from having the issue of when sending a MMS it showing up as the Phone Number on the Sim Card
https://www.dropbox.com/s/eclk63eyssz4to6/workingmms2.apk
When you install the apk and open, it will ask you the carrier you flashed the phone to, along with the phone number. It is very important that you fill this information in. If you fail to do so, the apk will not function.
Verizon Messages (Messaging Apk. for use with Flashed phones)
https://play.google.com/store/apps/details?id=com.verizon.messaging.vzmsgs
Slightly Themed Version of Verizon Messages:
https://www.dropbox.com/s/w9kmkyhpkj6ljnr/vzmThemed.apk
Voicemail Notification Apk for Flashed Phones (Does not suppose to have ads):
https://www.dropbox.com/s/32lvu0n7dlill84/voicemailnotifier.apk
DFS latest
http://cdmatool.com/downloadFiles/application/Setup DFS 14.04.16.0.zip
QPST 2.7.402
https://www.dropbox.com/s/4et0l079vnf0jir/QPST.2.7.402.msi
Hidden menu Apk:
https://www.dropbox.com/s/hefr96pykkuifj1/HiddenMenu_No_Root.apk
Samsung Drivers
http://www.samsung.com/us/support/owners/product/SCH-I545ZKAVZW#

Helpful Tips:
How to Enter Diag Mode by Carrier Phone:
Sprint SPH-L710 (Galaxy S III) and SPH-L900 (Note 2)
Open Dialer enter ##3424#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
____________________________________________________________________________________________________________________________________________________
Sprint SPH-L720 (Galaxy S4,S5)
There are two options to dial for diag menu on this phone
##3424# and *#7284#
One will ask for an SPC Code and One will Not
Use the one that does not ask for SPC Code
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
____________________________________________________________________________________________________________________________________________________
Verizon ]SPH-I535 (Galaxy S III) and SCH-I605 (Note 2) up to 4.2.2 Android Version
Open Dialer enter *#22745927
When Enable/Disable Menu comes up tap "Hidden Menu Disabled"
Select "Enable" on Popup
Press Home button
Open Dialer
Dial **87284
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
________________________________________________________________________________________________________________
Verizon ]SPH-I535 (Galaxy S III) and SCH-I605 (Note 2) 4.3 Android Version
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
____________________________________________________________________________________________________________________________________________________
Verizon SPH-I545/SM-G900F (Galaxy S4, S5) / Galaxy Stellar I200 4.1.2
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
____________________________________________________________________________________________________________________________________________________
USCellular SCH-R530 U (Galaxy S III) and SCH-R950 (Note 2) up to 4.1.2 Android Only
Open Dialer enter *#22745927
When Enable/Disable Menu comes up tap "Hidden Menu Disabled"
Select "Enable" on Popup
Press Home button
Open Dialer
Dial *#7284#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
____________________________________________________________________________________________________________________
USCellular SCH-R530 U (Galaxy S III) and SCH-R950 (Note 2) 4.3 Android Only
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
_______________________________________________________________________________________________________________________
USCellular SCH-R970 (Galaxy S4) under 4.3
Open Dialer enter *#22745927
When Enable/Disable Menu comes up tap "Hidden Menu Disabled"
Select "Enable" on Popup
Press Home button
Open Dialer
Dial *#0808#
When PhoneUtil Opens Select PDA
Tap Qualacomm USB Setting
Select DM+Modem+ADB
Tap OK
(Remember after flashing to return and put phone back to MTP+ADB)
__________________________________________________________________________________________________________________________________________________
USCellular SCH-R970 (Galaxy S4, S5) 4.3
Dial ##DMMODE#
Tap On
(Remember after flashing to return and Tap OFF)
____________________________________________________________________________________________________________________________________________________
APK to Get SPC/MSL on Sprint Phones running 4.3 Android
https://www.dropbox.com/s/gy1729al1zn4hzg/SPCUtility .apk
_______________________________________________________________________________________________________________________
Utility to Get in Diag Mode.......
https://www.dropbox.com/s/555mcjdpcp3vem3/PhoneUtilss.apk
_______________________________________________________________________________________________________________________
How to Bypass Verizon S3 Activation Screen without Sim Card
While in Portrait Mode of the Languge Screen
- Tap below the last language, Left side - Right Side
- Left Side - Right Side
- Volume up Button.
____________________________________________________________________________________________________________________________________________________
YouTube Fix for Sprint Flashed Phones:
Dial ##3282#
Enter SPC (000000)
Look through Menus and find the options to change the below, and modify them to below settings
RSTP Proxy Port
0
RSTP Proxy Address
0.0.0.0
HTTP PD Proxy Port
0
HTTP PD Proxy Address
0.0.0.0
____________________________________________________________________________________________________________________________________________________
How to Reset a Sprint Samsung Phone back to Sprint
Open Dialer and dial ##RTN# then enter your MSL/SPC Code (Most likely is 000000 if it has been flashed before
You most likely will need to also put a Sprint PRL on the phone also if you are not using the Sprint Corporate PRL
If so you can use this one and it should work fine:
https://www.dropbox.com/s/frdvl985bsdfdt9/24006.prl
_______________________________________________________________________________________________________________________
Remove No Sim Card Icon from Taskbar
Must be Rooted
Use BuildProp Editor here to edit: https://www.dropbox.com/s/srnoi9qwzggujex/com.jrummy.apps.build.prop.editor-1.apk
Ad the Below line to Build Prop at the very bottom
ro.config.donot_nosim=true
Tap Save and reboot
_______________________________________________________________________________________________________________________
Verizon S3 i535 Casual Root/Unlock/Recovery
(THIS IS ONLY COMPATIBLE WITH FIRMWARES UP TO 4.1.2 MF1 if you try on any other versions you will BRICK your device)
Easy way to Root/Unlock/Install Recovery Verizon S3 Only
http://forum.xda-developers.com/showthread.php?t=2332825
**As always use at your own Risk... This is not my work.... Give credit and thanks to the developers of the methods please**
_______________________________________________________________________________________________________________________
How to Reset a Sprint Samsung Phone back to Sprint
Open Dialer and dial ##RTN# then enter your MSL/SPC Code (Most likely is 000000 if it has been flashed before
You most likely will need to also put a Sprint PRL on the phone also if you are not using the Sprint Corporate PRL
If so you can use this one and it should work fine:
https://www.dropbox.com/s/frdvl985bsdfdt9/24006.prl
_______________________________________________________________________________________________________________________
Android 4.3 Upgrade Methods for Verizon and Sprint Phones
DO NOT DOWNLOAD THESE FILES AND ATTEMPT UNLESS YOU ARE 100% SURE YOU KNOW WHAT YOU ARE DOING
THIS WILL LOCK YOUR BOOTLOADER FOREVER NO GOING BACK TO PREVIOUS VERSIONS EVER
Let me stress that anytime you flash either with ODIN or normal methods you take the chance of BRICKING your device.
SO be sure you know what you are doing as I am not responsible for anything that may go wrong.....
These will wipe your devices and bring the phone back to like is what was brand new, and should not affect your flash, but then again do at your own risk.....
______________________________________________________________________________________________________________________
ODIN 3.07 Program to use for the Update: https://www.dropbox.com/s/zjw7zhr9br...Odin_v3.07.rar
Flashing Firmware with Odin Instructions:
1. Put your phone into download mode. To do this turn the phone off and then press volume down+home button+power button at the same time. You will then get a warning saying press up to continue and down to cancel, press volume up and you are now in download mode
2. Start Odin
3.At this point please make sure that ONLY TWO OPTIONS TICKED are "Auto Reboot" and "F.Reset Time" (otherwise you could end up with a very expensive paperweight)
4. Select the PDA button in the Odin program: Direst it to the tar file that you are using to upgrade the one you downloaded for your device......
5. Plug your Phone into the computer, wait for the drivers to install and then wait for the ID:COM section to turn blue in ODIN.
7.Press start and the flash will begin, once this has started do not remove the usb cable or turn off your computer or the device (or you will have brick for sure) the phone will reboot once the flash has finished.
8. All Done Enjoy 4.3
______________________________________________________________________________________________________________________
SPRINT S3 ONLY 4.3 Jelly Bean L710VPUCMK3
You cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
Link 1:
http://terafile.co/243485193552/L710...UCMK3_HOME.zip
Link 2:
http://ul.to/q2tqpepc
Link 3:
http://rg.to/file/d084d17f683d047600...ginal.zip.html
__________________________________________________ __________________________________________________________________
Verizon S3 ONLY 4.3 Jelly Bean I535VRUCML1
You cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
Link:
http://www.androidfilehost.com/?fid=23269279319199798
_____________________________________________________________________________________________________________________
Verizon S4 ONLY 4.3 Jelly Bean I545VZWEMK2
You cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
Link:
http://terafile.co/99d3fb3e0855/VZW_I545VRUEMK2_I545VZWEMK2.zip
______________________________________________________________________________________________________________________
SAFEROOT
Safe Method to Root Only the Device: (This will work on other versions OF Android also) Does not include Custom Recovery (ROOT ONLY)
Will not trip KNOX for warranty purposes either:
Link:
http://forum.xda-developers.com/showthread.php?t=2565758&highlight=s3
Before you try using this rooting program, you'll need to have the USB drivers installed for your phone: (Linked Below)
Drivers Download: https://www.dropbox.com/s/8n1bl5uusy... (2).exe
Step 1 - Install Drivers Above
Step 2 - Enable USB Debugging
Step 3 - Unzip the saferoot.zip
Step 4 - Root your phone
Double click on the "install.bat" to run the root. It will root and reboot your phone. Once that's done, you're rooted!
(Follow Instructions that are included in exploit)
remember you cannot downgrade from 4.3 if you try with ODIN or any other method you will BRICK your phone....
______________________________________________________________________________________________________________________
Things Not To Do With A Flashed Phone
1. NO OTA Android Updates Period (You will break your flash)
2. No OTA Programming *228, *22890, *22800, *22801 or any other Variants
3. Some Rom's do not play well with Flashed Phones do your research before flashing.
4. Never do a RTN (Return to Network) Reset ##786# on a Flashed Device (Most definitely will break your flash)
5. Some Radios/Modems cause issues if you flash (If the phone is working leave it be)
6. Factory Reset ( I recommend not to do this also, some versions of Android phones it will break things period)
7. PRLS ..... aww my favorite, everyone thinks these are the answer to all their prayers
a. If the phone is working leave it be (my personal stance)
b. Some PRL's are not EVDO or have not been Modded and will break your 3G or throw the Roaming Symbol
c. I have posted many PRL's above that will work with 3G (Latest one I modded is 60007 for all carrier phones)
8. No Phone Number Change (You change your carrier assigned number, you must reflash)
_______________________________________________________________________________________________________________________
Why Is My 3G Data Slow?
It's a complaint I hear everyday from people using flashed smartphones performed by them or another flashing provider...
Why are my speeds so slow and is it possible to improve the situation?
There are a variety of reasons why 3G data speeds may be less than stellar, and each one requires a different solution.
Before assuming there's a problem, though, make sure you understand the realistic capabilities of your service.
VERIZON/Page Plus/Selectel:
2G 1xRTT: 50-100kbps download and upload with bursts to 144 kbps
3G EVDO Rev-A: (shows up as "3G" on your phone): 600-1400kbps download with bursts to 3Mbps, 200-800kbps upload with bursts to 1.8Mbps
(Don't get to caught up in running speedtest as these can be very confusing and fool you at times into thinking you have a problem when actually
the way they test and the servers they use get congested also)
POTENTIAL PROBLEM #1: Weak signal
If you're too far away from the tower (or if there are a lot of obstructions/interference between you and the tower), your device won't be able
to pick up a strong signal and your performance will suffer.
Solution: Try other locations in your home or area you are in, some areas do not get great signal strength and this could be your issue.
POTENTIAL PROBLEM #2: Tower overcrowding (Network Congestion)
The bandwidth available from a cell tower is shared amongst all the users connecting to the tower. A cell tower can only provide so much bandwidth,
and the more users there are connecting to the tower, the slower everyone's speeds will be.
Is this YOUR problem? If you notice that your speeds tend to follow a pattern most days (for example, nice and fast late at night or early in the day but slower in the evening when everyone is home from work and school) and you've confirmed that the problem isn't signal-related (by testing your speeds at home and then again somewhere closer to the tower), you'll know your tower is simply being used by lots of other subscribers at the same time.
Solution: Unfortunately, there's nothing you can do about this (other than consider switching to a different provider who might have more capacity at their towers or isn't as oversold in your area).
POTENTIAL PROBLEM #3: Incorrectly Performed Flash
It's very common for flashed phones to have been done incorrectly.
Is this YOUR problem? This is very possibly the source of the problem if your flash was done incorrectly or you made changes to your setup recently.
Solution: You'll need to either troubleshoot the phone and or reflash the problem phone.
POTENTIAL PROBLEM #4: Tower issues
Providers periodically do maintenance or upgrade work on cell towers, which can disrupt service; other factors like severe weather occasionally damage cell towers and cause problems.
Is this YOUR problem? If your service suddenly degrades significantly and doesn't improve much during non-peak hours (which it would if the problem was overcrowding), and you've confirmed it's not a problem with your flash, the problem likely lies with the tower. The best way to confirm is to take your device several miles away where you'll be connecting to a different tower and test there — if everything works fine when connected to a different tower, you'll know something is amiss with your home tower.
Solution: Out of your control, bear with it until the provider finishes work and repairs.....
Potential Problem #5: Sprint and USSC Devices
I hate to say it but I have seen some Sprint/USSC phones have this issue, likely due to weaker radios and or hardware implemented in the device.
Is this YOUR problem? This is very possibly the source of the problem if your flash was done correctly and you verify that other devices on the network in the same location as yours get consistently better data speeds.
Solution: Verify flash is correct and that your connected at EVDO in settings and passwords have passed authentication. If so this most likely a Sprint/USSC device issue out of control by the user. Replace device with another Cellphone Carrier brand and most of the time problem will be solved. (I see this allot with some of the Samsung S3 Devices from Sprint/USSC, almost like certain lots had a weak radio for whatever reason)
In the end your speeds can be related to any or all of these issues, and a proper flash is key to performing at optimal speeds.
Sometimes as much as we hate to admit a professional flasher is needed to correct speed issues, you would not believe some of the poor flashes I see when I read preflashed phones everyday that so called profesSB_Driver_1.5.1

Reserved.................

Viper32 said:
Reserved.................
Click to expand...
Click to collapse
Wow really surprised this topic has gained no attention......
Anyways if anyone has any questions reply here or message me.....
Viper

I flashed my phone to verizon prepaid but wanted to give pageplus since all of the issues with mifi. Will I need to get cdma workshop and are you gonna post a guide?

thatguythatdid said:
I flashed my phone to verizon prepaid but wanted to give pageplus since all of the issues with mifi. Will I need to get cdma workshop and are you gonna post a guide?
Click to expand...
Click to collapse
Just PM me

If only it had 4g I'd switch.
Sent from my SCH-I535 using Tapatalk 2

Is it possible to do this with an older samsung fascinate or droid x2? I got a buddy who is in need of a prepaid account and I wonder if we could use one of my old devices that still works.

TheDiabolicaL1 said:
Is it possible to do this with an older samsung fascinate or droid x2? I got a buddy who is in need of a prepaid account and I wonder if we could use one of my old devices that still works.
Click to expand...
Click to collapse
Shouldn't you be able to do these old phones w/ Page Plus, no problem?

Flashing help
I have 2 phones that I need to get flashed over to pageplus. 1 Galaxy S2 sch-R760 and 1 Galaxy S2 sph-D710. I have been reading and trying to find complete tuts or a reasonably priced service to get these flashed over but no one seems to be able to get 3g working. The R760 I had flashed to PP but I only get 1x data speeds. I have not tried to do the D710 yet. My wife and I are already on pageplus with a DroidX and a Droid X2 so I guess during the flashing process you have to get or PP telephone numbers on the phones since you cannot do a normal ESN swap with customer support on flashed phones. Can anyone help?

dcpr5480 said:
I have 2 phones that I need to get flashed over to pageplus. 1 Galaxy S2 sch-R760 and 1 Galaxy S2 sph-D710. I have been reading and trying to find complete tuts or a reasonably priced service to get these flashed over but no one seems to be able to get 3g working. The R760 I had flashed to PP but I only get 1x data speeds. I have not tried to do the D710 yet. My wife and I are already on pageplus with a DroidX and a Droid X2 so I guess during the flashing process you have to get or PP telephone numbers on the phones since you cannot do a normal ESN swap with customer support on flashed phones. Can anyone help?
Click to expand...
Click to collapse
PM me I can help you out........
Viper

Can anyone verify 3g will work?
Sent from my S3, because iPhone is faget.

warbdan said:
Can anyone verify 3g will work?
Sent from my S3, because iPhone is faget.
Click to expand...
Click to collapse
Yeah I can, since I do them everyday
Viper

Tried to pm you, but I don't think it sent. Is there a way I can flash the prl and get 3g on my phone with net10 or do I need to flash to pp?
Sent from my S3, because iPhone is faget.

Galaxy Nexus i515 to Page Plus
Viper,
I have sent you a PM on this. I have been trying to get it to work by reading through the thread - http://forum.xda-developers.com/showthread.php?t=1696621 but to no avail. Appreciate if you could help. I am ok with not having 3G if the solution is not complicated.

Long time PP user with new (to me) SIII
Ill send you a pm. I would like to get this working for my wife. I love to tinker and have flashed old VZW phones when we first came to PP, but time is limited for me.
Thanks!

I'm trying to pm you, Viper, but for some reason messages aren't going through. Are you around for a flashing?

First thanks forbthe topic and help. I need to know how to un flash my s3 so I can use it on my contract. I traded for this s3 and did not know it was flashed to pageplus. All help is greatly appreciated.
Happy fathers day.
Sent from my SCH-I535 using xda app-developers app

Trying to get 3g on your verizon galaxy s3? Stop searching. Viper is awesome! 1000 thanks, man!

SM-G920W8 | No Option To Connect to LTE

I bought an Unlocked Canadian S6 recently, and it just won't let me connect to the LTE network.
Model Numer : SM-G920W8
Android Version : 5.0.2
Baseband : G920W8VLU1AOCG
Connecting to the LTE is not even an option. When I go in the Network Options, I get the choice between :
-WDCMA/GSM (auto connect)
- WDCMA only
- GSM only
I know for a fact that I am in the coverage zone, so no need to ask that silly question
I've tried different SIM cards, played in the options a bit, and factory reset the phone about 5 times now, yet nothing seems to work.
Also, when I try to do the update, it just reboots and gives me an Android logo and a failed Icon
I've only seen one other post like this from a carrier's support website, but no solutions were found.
**Update : For a reason, after a recovery, it will connect to the LTE for a bit or until next boot, then go back to what it is now.

First question, who did you buy the phone from? Second, Is it second hand? By default, Wind mobile does not allow the LTE option to be displayed in system settings as they as a carrier don't have LTE. It is blocked by the CSC setting for the carrier. As for other carriers It should leave you the option to connect in settings where you say it is not. If it is a Wind phone, You would need to change the CSC to enable the LTE selection. There is a method to force LTE even without option in settings, but I think it is removed in the latest firmware. Try dialing *#2263# in the dialer. It may bring you to menu that will allow you to select LTE. This is not a permanent method though as it will need to be done every boot. The other way, (If you are in fact a Wind/Mobilicity phone) is to enter dialer and enter *#272*IMEI# with IMEI being your devices unique code. If at all possible, take a full nand and Titanium Backup before doing this and be sure to transfer everything off the phone to a PC. This method wipes everything and I mean everything off the phone buy is a surefire way to enable LTE.

Yes, it was second hand. I didn't ask who was his carrier simply because it was unlocked.
I'll try it tomorrow, thanks for the information

Here is the menu you will see when you type the *#272*imei# code into your dialer. The codes are the carrier names. Mine which is GLW is Wind, BMC is Bell, RWC is Rogers, etc.

Maybe there is no LTE in your area...

roydok said:
Maybe there is no LTE in your area...
Click to expand...
Click to collapse
It would still be visible in the Settings/Mobile Networks/Network Mode menu which it is not. His problem is more than that.

BCSC said:
First question, who did you buy the phone from? Second, Is it second hand? By default, Wind mobile does not allow the LTE option to be displayed in system settings as they as a carrier don't have LTE. It is blocked by the CSC setting for the carrier. As for other carriers It should leave you the option to connect in settings where you say it is not. If it is a Wind phone, You would need to change the CSC to enable the LTE selection. There is a method to force LTE even without option in settings, but I think it is removed in the latest firmware. Try dialing *#2263# in the dialer. It may bring you to menu that will allow you to select LTE. This is not a permanent method though as it will need to be done every boot. The other way, (If you are in fact a Wind/Mobilicity phone) is to enter dialer and enter *#272*IMEI# with IMEI being your devices unique code. If at all possible, take a full nand and Titanium Backup before doing this and be sure to transfer everything off the phone to a PC. This method wipes everything and I mean everything off the phone buy is a surefire way to enable LTE.
Click to expand...
Click to collapse
Sweet! It works :good: Thanks man
Now, would you have any ideas on why the update won't work? I didn't get much into it yet, but I will soon.

I'm not sure why it wouldn't update, but now that you have changed the CSC you can download the update and flash with Odin. Pick your carrier and go to town. The guy running the following thread runs his own firmware host. He's got amazing DL speeds. Usually takes me 6 or so minutes to do the 1.6gb file. http://forum.xda-developers.com/showthread.php?t=3086387

I'm having the same issue.
Scurbs said:
Sweet! It works :good: Thanks man
Now, would you have any ideas on why the update won't work? I didn't get much into it yet, but I will soon.
Click to expand...
Click to collapse
Connected with someone selling a G920W8 version. LTE is disabled and the codes aren't working. Can you reaffirm which unlock code worked for you? I'm on Fido, what LTE network are you using?

hi BCSC
Thanks for the details. I searched complete net and read all articles but nothing set me up with the proper thing. i read your solution i dialled *#2263# and all i got is service mode and in that i went to band selection , LTE and the all ....... Yes and its showing LTE in mobile data. THanks so much.
But now another issue, network is showing perfect but no outgoing and incoming calls.
in incoming its showing busy and on outgoing its not connecting to another phone.
And, Lte is not showing in mobile networks, There only 3 options still are showing.
Mine is same Wind S6 but i had to use in India.
Let Me know
Thanks once again
Cheeerzzzzz
Varun

Picking LTE from the service mode will note make it visible from the settings menu. Its more of a workarpund instead of a way of permanently enabling it. As for the issue of no out/in calls, my best guess is that it could be due to which LTE bands are being used or are available in India. Unfortunatly I have no way to test that option. I only was successful in getting the Wind LTE option on Canadian carriers.
Sent from my SM-G935W8 using XDA-Developers mobile app

S6 unable to see test mobile network

I'm building a test mobile network on some laptops and with a software defined radio based on Open AirInterface (is googleable, but I can't post the link cos I'm a newb) code, and I have this up and running. Additionally, I've bought some programmable SIMs to work with it on a bunch of phones. The information on these I've added into my HSS implementation. The Country Code/Network code deployed on the SIMs is 901/70 - so it doesn't interfere with commercial networks.
I'm testing with a bunch of phones in an isolation chamber, and my end goal is to shift the network into something I have a license for and "go public", but this network will have a low channel bandwidth (3MHz or 1.4MHz in Band 3 LTE). Not many phones have supported this, so I started with a 5MHz channel, which most do support - and I've successfully connected an S4 and a Nexus to my little network. However, when I tried the S6 with a SIM that worked in another phone, it cannot even see the network. I've seen hints of Samsung doing operator whitelisting, but would like to know if this is the case and, if possible, how to add my operator codes into the whitelist.
So far, I've tried the following:
a) "*#0011#" puts you into ServiceMode where you used to be able to enable/disable frequency bands and other such settings with the "Q0000" menu entry - but it looks like Samsung have squished this, also I know the phone has Band 3 operational as I can put a commercial SIM in it that runs on that band. I've not found any way of actually modifying any settings within this mode.
b) I found the file "/system/etc/apns-conf.xml" which contains a list of operator APN addresses - I updated mine to contain my settings, but no joy, and if I "reset to default" my APN settings, my settings are not picked up and I have to manually add my APN (but at least that stays selected)
c) I found some databases in "/data/data/com.android.providers.telephony/databases/", in particular "nwk_info.db" and added my network details to it. The phone then changed from basically saying I was only able to make emergency calls to "Selected mobile network (901/70) unavailable", which kind of at least hints I've moved it in the right direction
The S6 is running a rooted factory reset, and allows SIMS from two different commercial operators on it so it should be completely unlocked. It's never been out of the country, so should have "defeated" the region locks that Sammy put on the phones nowadays (although it begs the question whether rooting the phone resets this and perhaps it's still awaiting 5 mins of calls via a local SIM?).
Does anyone know of a whitelist of MNC/MCC numbers I can add my settings to? Or any other possible solution to this?
The long winded solution is to change the MNC/MCC info on each of my SIMs, but that's a PITA and I'm not even sure it'll work yet (I will attempt to try one soon, but changing the configs on my mobile network is also non-trivial!)

Can you flash ATT, VZW to XAA Branded in Download Mode

Forgive me if this has been covered but I havn't found the answer. I've flashed just about every phone I've ever had but my question here is can I / how do I flash to where the phone reads as XAA in download Mode?
The situation is my phone was originally on at&t. They unlocked it and I'm on Verizon. It all works great (it still says at&t on download Mode screen)
My problem is that if I log into the my Verizon app it disables my visual voicemail. I finally got a Verizon tech on the phone that explained that it is unsupported due to originally being on a different carrier and their system identifies that and disables the VVM. The only fix I can find is to put my sim in my backup S9+ that came from Samsung unlocked (or any Verizon phone) and I can then reactivate my VVM by resubscribing.
I currently have 3 Note 20 Ultras. One Each originally from Samsung, ATT and Verizon but the AT&T is the only one that is 512GB or I would just switch phones. I have flashed them all to U1 firmware but notice they all still reflect the original carrier in Download Mode so again my question is can I change this by flashing it / or is it just a matter of what sim card is in it when it's flashed? I need it to be seen as XAA by Verizon system so not to loose VVM... Pics attached.
Any advice here is greatly appreciated in advance.

Just a try... You can try the *#272*imei# method... But thats If it works. Not sure if the sims has to be in the phone for that to work.

GDHAMTON7 said:
Just a try... You can try the *#272*imei# method... But thats If it works. Not sure if the sims has to be in the phone for that to work.
Click to expand...
Click to collapse
Yes it brings up this menu... So I just select the XAA and that's it? I've been reading forums and this method is reversible it seems ... I'm familiar with Odin and all that but these hidden menus are new to me...
Thanks for the reply btw

You may have to activate the bottom most option to stay.
Don't worry if you can't access the menu after the change. You can download samsung band selection and change to automatic or one of the lte options then back to automatic to get to the menu.

CSC Guide
CSC (which I think means Carrier Service Code) helps to set what options for settings show in the device for things like voicemail and wifi calling, as well as sets network code information for things like carrier aggregation combos.
When you go to your phone settings->about phone->software information and look in the Service Provider SW ver. section, you will see as the last line a combo like XXX/YYY/ZZZ. This indicates what carrier sales and network code is set and what brand the phone was manufactured as.
I think of the XXX/YYY/ZZZ configuration as follows
XXX=Sales Code-What kind of features are setup in the firmware like wifi calling, video calling and settings menus
YYY=Network Code-What kind of network features are set for things like carrier aggregation and LTE/5G bands
ZZZ=Manufactured as Code- What model the phone was originally manufactured as. Ot has no affect on the system settings or options. THIS CAN NOT CHANGE. IT SHOULD ALWAYS BE THE SAME. ONLY A ROOTED PHONE WOULD BE ABLE TO ACCESS THE FILES NECESSARY TO CHANGE THIS.
for more details, refer to post:-
[Guide] Service Mode and CSC Guide/Enable LTE/5G Bands and Services/5G Low Band on U1
Hello All, Many people have asked about service mode and CSC related questions and I thought we should get a discussion going that is all in one place. *DISCLAIMER* I do not take any responsibility for any issues that may occur from changing...
forum.xda-developers.com