Database Info

[Q] Cyberpad iView 7xx TPC Rooting?

Anyone doing any "development" rooting, firmware flashing, CWmods etc on iView tablet/phones?
I found someone who did actually...named: eyeoncomputers (hey there!) who made a very comprehensive and excellent Youtube tutorial seen here (I hope this is allowed), titled:
IVIEW 760TPC Advanced Improvements - Flashing Firmware, Custom Scripts & more...
http://www.youtube.com/watch?v=fATLTulwdQg
So now, at least I know it can be done on an iView....
I'm tempted to just go for it....unfortunately, a 760TPC spec is pretty much too far off from a 792 TPC model (dual sim phone capabilities + 2G/3G + GPS/A-GPS connectivities which will most likely get messed up) if I flash it...and without any firmware back-up I'd most likely brick it before I could say I have root!)
Basically...I just want the 792 TPC rooted (for backing up purposes Titanium back up needs root right?)....so has anyone done it yet? or knows how to do it? or maybe an idea on how to go about it? Anyone? :-?

detartrated said:
Anyone doing any "development" rooting, firmware flashing, CWmods etc on iView tablet/phones?
I found someone who did actually...named: eyeoncomputers (hey there!) who made a very comprehensive and excellent Youtube tutorial seen here (I hope this is allowed), titled:
IVIEW 760TPC Advanced Improvements - Flashing Firmware, Custom Scripts & more...
http://www.youtube.com/watch?v=fATLTulwdQg
So now, at least I know it can be done on an iView....
I'm tempted to just go for it....unfortunately, a 760TPC spec is pretty much too far off from a 792 TPC model (dual sim phone capabilities + 2G/3G + GPS/A-GPS connectivities which will most likely get messed up) if I flash it...and without any firmware back-up I'd most likely brick it before I could say I have root!)
Basically...I just want the 792 TPC rooted (for backing up purposes Titanium back up needs root right?)....so has anyone done it yet? or knows how to do it? or maybe an idea on how to go about it? Anyone? :-?
Click to expand...
Click to collapse
I has a Iview 754 tpc and like you Im searching for some extra info for modding these tablet, but after hrs and hrs searching on internet, it appears like noone works on these brand, these a pitty, because its a cheap and common brand (iview) between people...

zizou_cr said:
I has a Iview 754 tpc and like you Im searching for some extra info for modding these tablet, but after hrs and hrs searching on internet, it appears like noone works on these brand, these a pitty, because its a cheap and common brand (iview) between people...
Click to expand...
Click to collapse
I have one of the 760tpc 's - I gave it to my mother but I need to get in and do Something to it because it's crashing and losing her apps. (Tired of walking her through reinstalling solitaire lol) here's a thread on another forum that may help or get you closer to your answers lol
http://tabletrepublic.com/forum/ivi...60tpc-k-ployer-momo9-official-thread-883.html
Sent from my SAMSUNG-SGH-I527 using Tapatalk 4

stinkeye22 said:
I have one of the 760tpc 's - I gave it to my mother but I need to get in and do Something to it because it's crashing and losing her apps. (Tired of walking her through reinstalling solitaire lol) here's a thread on another forum that may help or get you closer to your answers lol
http://tabletrepublic.com/forum/ivi...60tpc-k-ployer-momo9-official-thread-883.html
Sent from my SAMSUNG-SGH-I527 using Tapatalk 4
Click to expand...
Click to collapse
thanks, I"ll search inside this forum for the 754TPC models.. :good:

zizou_cr said:
thanks, I"ll search inside this forum for the 754TPC models.. :good:
Click to expand...
Click to collapse
My friend have an Iview-795TPC tablet but seems like a different story for them.
One of the kids or someone changed the lock pattern and one day the owner tried to open and locked after several attempts of trials.
Now, it asks for an email account and password of the (last) user who created and accessed the tablet but even the owner's account (email & password) seems like can't open it.
I also tried the HARD RESETTING of this gadget because when they sent it to me to do the remedy or fix it back to factory settings, I cannot undo it. Even I followed all the instructions and step-by-step procedures on the YouTube video, still cannot restore it.
Is anybody successfully tried to restore back to factory setting of this IView Tablet Model 975TPC?
I appreciate it to someone help me on this situation. Link or simple tutorial-instructions can do.
Thanks in advanced.

elsuirad said:
My friend have an Iview-795TPC tablet but seems like a different story for them.
One of the kids or someone changed the lock pattern and one day the owner tried to open and locked after several attempts of trials.
Now, it asks for an email account and password of the (last) user who created and accessed the tablet but even the owner's account (email & password) seems like can't open it.
I also tried the HARD RESETTING of this gadget because when they sent it to me to do the remedy or fix it back to factory settings, I cannot undo it. Even I followed all the instructions and step-by-step procedures on the YouTube video, still cannot restore it.
Is anybody successfully tried to restore back to factory setting of this IView Tablet Model 975TPC?
I appreciate it to someone help me on this situation. Link or simple tutorial-instructions can do.
Thanks in advanced.
Click to expand...
Click to collapse
Hi,
As you says my tablet model its diferent from yours, but when I realize my investigation on the web about a custom firmware from these tablet brand, I found these info, how can help you:
http://www.wikiforu.com/2013/03/how-to-reset-unlock-iview-tablet.html
By the way, could you please tell us, how its your experiense with these tablet? Bad or good?
Thanks..
P.S.: After search and search, I dont find anyone who make custom firmwares for these brand ...

zizou_cr said:
Hi,
As you says my tablet model its diferent from yours, but when I realize my investigation on the web about a custom firmware from these tablet brand, I found these info, how can help you:
http://www.wikiforu.com/2013/03/how-to-reset-unlock-iview-tablet.html
By the way, could you please tell us, how its your experiense with these tablet? Bad or good?
Thanks..
P.S.: After search and search, I dont find anyone who make custom firmwares for these brand ...
Click to expand...
Click to collapse
Thanks for the response.
Unfortunately, I cannot tell you about this tablet because it's my friend's gadget but I found out that it's okay to use for starters and I'm an ACER Tab user (A500),
I only brought this attention because my pal couldn't fix it. :fingers-crossed:

elsuirad said:
Thanks for the response.
Unfortunately, I cannot tell you about this tablet because it's my friend's gadget but I found out that it's okay to use for starters and I'm an ACER Tab user (A500),
I only brought this attention because my pal couldn't fix it. :fingers-crossed:
Click to expand...
Click to collapse
Here is the firmware for all the iview tablets. just unzip it and install the software and it will install the firmware to the device
iviewus.com/download/firmware/

iview 797tpc
I just purchased the Iview 797 TPC with jellybean 4.1.2.
These just released mid 2013, and have been looking all over for firmware, etc.
Not much out there for these models.
I had it connected to PC and the phone icon on desktop through media espresso said HTC generic.
So possibly these are clones of HTC.
These tabs are excellent except for the sound, they are to quiet for playback and handset volume.
So my question is can developers put aside the higher end models and get some ROMs for a Iview.
I would at least like to get jellybean 4.3 or even a piece of that KitKat .......

Flash / install the firmware
xgamer224 said:
Here is the firmware for all the iview tablets. just unzip it and install the software and it will install the firmware to the device
iviewus.com/download/firmware/
Click to expand...
Click to collapse
Now that I have downloaded the firmware, how do I put on the device? I don't have Windows (or rather would like not to use it).
I did successfully installed Android 4.4 on a Transformer Prime not so long ago, so I am comfortable with adb and fastboot tools.
Does anyone know?

[ROM][ODIN] P500VPBMB3 Sprint 4.1.2 Firmware

P500VPBMB3 Sprint 4.1.2 Firmware
For some unusual reason there is little to no development for the SPH-P500 and absolutely ZERO official firmware available for the Sprint model. This means, if you soft brick the tablet trying to install something you should not have, you have no easy way of getting back to the stock firmware. In addition, getting to the 4.1.2 version of the firmware is a royal pain due to the massive amount of "PATCH CHECKS" and assert checks built in to the OTA update. This means any deodexed system or a number of other reasons will be rejected if you try the OTA update while on non-official or approved firmware. So, for your convenience, I have compiled a simple ODIN-Flashable TAR file which will jet you up to speed installing the latest official Sprint 4.1.2 firmware.
Details:
P500VPBMB3 Stock w/ MB3 Modem
Package Includes: BOOT, RECOVERY, SYSTEM, MODEM AND CACHE ZONES
Download:
P500VPBMB3 Sprint 4.1.2 Firmware
Password on the archive is: www.mobiletechvideos.com
How To Flash:
BACKUP YOUR FILES AND DATA BEFORE FLASHING...ALWAYS. First extract this file using WinRAR or a program capable of extracting a RAR package as the package inside it is the TAR file you need. This was done to save time on the download. Once extracted, using ODIN, select PDA and choose this file. Now place your tablet in DOWNLOAD MODE by having it powered off, then power on by holding POWER and VOLUME DOWN until you see the on-screen text come up. Release the buttons and press VOLUME UP to enter DOWNLOAD MODE. Now click START on ODIN. Once completed (takes around 10 minutes), it is advised to enter RECOVERY MODE and perform a FACTORY DATA RESET for the best bug free experience since I don't know what ROM you are flashing from.
Did this help you out? Great, I'm glad it did! Click that THANKS button next to my name if you have the time. Please note, if you find yourself in a hard/soft brick situation of any type on any advice, give me a shout via PM or email through the contact page on our site. We also offer repairs on a number of other issues.

27 downloads and nothing? I'd love some feedback so others can be confident in the firmware.

It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....

Haha it seems that way! Well thanks for your response. Nice to hear from somebody about this. For some reason the Tab 2 10.1 forum members seem to be dead but want development anyhow without any input!

There are a lot of people here in a german forum there is mostly nobody ...
i hope you get some feedback! if not: there is not problem first things that will reported are problems

Haha, how true! No news is good news right?

problem and feedback if it works...
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks

shmusie said:
Hi. I am pretty new here (although I have been a member for a while, I have not really been active). I do have a Sprint Samsung Galaxy tab 2 10.1 inch display model P500VPBMB3. Perhaps I can try out what you are talking about if it helps me with my problem below and then I will be more than happy to give you feedback.
PROBLEM
I never really rooted a device before but I am at a loss here since the current version of Android that I have on my device is 4.1.2 . It's working OK but I run out of space very often since I only have 16GB of main memory. I would love to upgrade to 4.2.x so that I have the option of storing apps on the external SD card. I am not clear exactly what you are giving us here on your thread. If you can explain it to me and especially if it does what I am outlining above I would want done, I would love to give it a shot and then give you some feedback.
Either way thank you for helping is Sprint tablet people whether or not what you have above will help me.
Thanks
Click to expand...
Click to collapse
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.

connexion2005 said:
You will actually want to look into custom recovery combined with a custom ROM to enable this type of option. What I have provided here is a stock firmware (stock operating system). This is actually already what you have installed on the device.
Click to expand...
Click to collapse
Thank you very much for your prompt reply. You seem to be a helpful sort of person. I am sorry to be so dense but I have no idea what those things are. Is there a place where I can, sort of begin from scratch to learn all about these things or can you please fully explain what I need to do here?
I get that yo said that what you are offering is what I already have. What I don't understand is what exactly what to look for. I do know that if I install the wrong thing, I can brick my device. What I don't know if how to find what I am looking for. I already tried it in the search box-that's how I got to your thread.

This is honestly a very tough section as the P500 is a rare unit that has little to no development. You are in the right sub-forum but finding any mods for your unit may not be possible at this time unfortunately.

Thank you, thank you, thank you!!!!! You can root with Kingo root and make modifications with xposed. I just have been so busy with work.
I will flash this when I have time. Now I can be more risky with flashing because I can now go back to stock ROM.
Sent from my SM-N900P using Tapatalk

Android-Andi said:
It´s a disease from all P31XX and P51XX useres don´t hitting the thanks button and don´t giveing feedback... maybe they don´t want any support.... (?)...
i don´t have a P51XX - i can´t give other feddback then this... sorry....
Click to expand...
Click to collapse
Hello, I know its been almost a year, but I tried to flash this ROM and get stuck after the tab reboots with the message "POWER RESET or UNKNOWN UPLOAD MODE", is there anything I can do to restore the tab (I did not do any backup).
Thanks a bunch

Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.

connexion2005 said:
Do you have the Sprint model? If so, try re-downloading it and flashing again. Afterwards, perform a factory data reset.
Click to expand...
Click to collapse
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.

meresis said:
The tab comes from China but in the options i've seen SPH-P500 so I supposed it was a model made for Sprint.
I did flash again and reset factory but nothing changed.
Click to expand...
Click to collapse
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...

connexion2005 said:
That is definitely unusual though the fact it came from China. This likely is NOT the right firmware for your model. The back of the unit should have the model number. See what it says...
Click to expand...
Click to collapse
Indeed the back says P5110 ... Chinese devices ... Thanks a lot ! :good:

P500
Wow!! I made a mistake!! I bought this tab to have some fun rooting and installing custom roms. I should have checked the forums first to see if there was any support. Thanks for what you've provided here. I'm going to at least try to root and install xposed.

I have a sprint gtab2 10.1 that's out of contract, so i'm willing to start working on things if needed.

if we no longer need to use the Sprint data can we flash a SPH-P5100 rom for wifi only ?

resurrecting an old thread. Need to find the original firmware for sph-p500. This appears to be it, but I can't find or get the password to the .rar file. I can't find the firmware anywhere else after a TON of google searches. any help appreciated in either getting the password to the .rar file, or a different place to download the firmware.

[Q] general (?) problem with device

Hello Guys!
This weekend i had the Galaxy S4 GT-I9505 of a friend cause he wanted me to try to simunlock his device.
In order to do that i had to flash a other modem version and since I had i there aldready, i flashed some custom roms to satisfy myself (I myself have a company (I)Phone and since then i hadn't used an android phone).
And here's the problem... the wifi didn't work (when i tried to activate it, it just said: activating wifi, please wait...). when I wanted to play a song it said: EQ could not be found. please close other music players(non installed) or restart phone (didn´t help). And when I wanted to switch from photos to videos in the camera app, it just threw out an error message (can't remember what it said). Maybe there were more errors but this are the ones I found in the short testing time.
Yesterday evening I somehow managed to fix it (still don't know how or why). But now I am curious about what happened.
Factory resets and stock rom didn't help. I restored the phone to stock as much as possible, but I think that this wasn't the solution.
Anybody here encountered the same problem(s) and can tell me what the reason was? I searched the forums and google (maybe wrong?) and couldn't find the reason.
I hope someone can tell me =)
thanks
Edit: Sorry, didn't read all stickies =/ (about no questions in general)

Hmmmmmmm Download orginal stock from sammobile an flash it but dont start the phone. Go to recovery and make a superwipe. try.
Sent from my GT-I9300 using XDA Premium 4 mobile app

amazing_goose said:
Hello Guys!
This weekend i had the Galaxy S4 GT-I9505 of a friend cause he wanted me to try to simunlock his device.
In order to do that i had to flash a other modem version and since I had i there aldready, i flashed some custom roms to satisfy myself (I myself have a company (I)Phone and since then i hadn't used an android phone).
And here's the problem... the wifi didn't work (when i tried to activate it, it just said: activating wifi, please wait...). when I wanted to play a song it said: EQ could not be found. please close other music players(non installed) or restart phone (didn´t help). And when I wanted to switch from photos to videos in the camera app, it just threw out an error message (can't remember what it said). Maybe there were more errors but this are the ones I found in the short testing time.
Yesterday evening I somehow managed to fix it (still don't know how or why). But now I am curious about what happened.
Factory resets and stock rom didn't help. I restored the phone to stock as much as possible, but I think that this wasn't the solution.
Anybody here encountered the same problem(s) and can tell me what the reason was? I searched the forums and google (maybe wrong?) and couldn't find the reason.
I hope someone can tell me =)
thanks
Edit: Sorry, didn't read all stickies =/ (about no questions in general)
Click to expand...
Click to collapse
The problem might be related to modem.
It is reponsible for the wifi and you mobile network.
And when u flashed some else it breaked that function. ..
And after flashing the Stock one Your might have fixed the problem.
This is how I interpreted the problem.
Might be the Reason. ..
Regards,
Zeuscluts
----------Signature---------
Need Some Cool Guides Visit Hmpshah Guides

[Q] Touchscreen does not work at all after flashing wrong ROM

Hello everyone.
I have an Alcatel One Touch 908F running Android 2.2.2 that I chose to root and install a 2.3 ROM since no official update was released and it had a lot of advantages that I really need. I successfully rooted it with VROOT, install a CWM 5.0.2.7 recovery and flashed two custom ROMs based on 2.2.2 (the one for Alcatel One Touch 908S WIND, and the one for Alcatel One Touch 908Q T-Mobile) just for testing.
Both successfully worked with no problems at all (except the fact that Back, Home and Menu changed their places but it was fixed by flashing a tool that I found on this forum - Thank you so much, developers!) so I wanted to flash a 2.3 ROM, but I didn't realize that it wasn't approprite (It was only for Alcatel One Touch Telenor, and the worst: it wasn't told in the instructions!). I knew it when, once my phone booted for the 1st time, it showed the "Telenor" logo reversed on top, and white lines at the bottom of the screen. So I reverted back to my stock ROM using a backup made with CWM.
I got the stock ROM again. Only now, neither the touchscreen nor the lighting Home, Menu and Back keys are working! Hitting the screen acts like hitting the Menu button!
I tried many ROMs, and it didn't work. Well, the good thing is that I still have root access, USB debugging enabled and CWM 5.0.2.8 recovery.
I'm really desperate. My phone is out of warranty. Is my phone really as useful as a brick, now? I hope it isn't. Can you help me, please? I urgently need my phone to work again because I can't afford to buy a new one or repair it! Is there any software that can bring my only smartphone back to life? Shall I switch to TWRP recovery? Which ROM shall I flash?
Thank you so much in advance for your help!

UP... (Since there was no reply for so long...)
I see, it is not a popular model
I found out that the problem can be solved by flashing the stock kernel which contains the original touchscreen drivers needed to make it work again, but I couldn't find the file. Can anyone upload it for me, please? If this is not the right way,
Does anyone have another, please? Thank you!

mallouka97 said:
UP... (Since there was no reply for so long...)
I see, it is not a popular model
I found out that the problem can be solved by flashing the stock kernel which contains the original touchscreen drivers needed to make it work again, but I couldn't find the file. Can anyone upload it for me, please? If this is not the right way,
Does anyone have another, please? Thank you!
Click to expand...
Click to collapse
Flash everything ( including ROM , boot.img etc. ) created for your device . It will solve the problem .
As a warning, don't flash other device's firmware , until you became a porter or using an Android one :sly:
Hope I helped !

AlfasMP said:
Flash everything ( including ROM , boot.img etc. ) created for your device . It will solve the problem .
As a warning, don't flash other device's firmware , until you became a porter or using an Android one :sly:
Hope I helped !
Click to expand...
Click to collapse
Sorry I was late... I will give it a try. Thanks anyway!

Did you solve this?

gringobenuk said:
Did you solve this?
Click to expand...
Click to collapse
OP hasn't been online since 2015 so provably yes

Boot loop after twrp restore of original Nandroid on gt-n8013

Howdy
Not sure where to start asking for help. Here is where I'm at :
Twrp (2.8.6?) works great... Too good
Used it to create a complete Nandroid of my original (jb) system.. I backed up everything I could see.
Installed a blisspop rom that also worked.
Decided to return to the original system .
In twrp did factory reset, advanced wipe of dalvic cache, data, and system each time.
Did restore with md5 check. 6 md5's all good, no failures
Restore from Nandroid file on ext micro sd. Everything successful. No fails reported anywhere.
Reboot. System tries to start but returns to twrp instead of booting to system. Have done this 3 times with same results.
My stock was something like UEUCOI1.
I hate to have to start over but will if that's the best I can do. If so I don't know where to proceed from here. Where to locate a stock room
Any suggestions are much appreciated,
Best regards,
Dr Dan

Jonathan Kang said:
Ok, I have seen what you have done. You installed and did too many things at once on TWRP! If you do that you will get a bootloop or a soft-brick which is very common. If I ever got stuck I just downloaded Samsung Smart Switch for Windows.
1st: Turn off your tablet/phone.
2nd: Press More then Emergency software recovery and initialization.
3rd: Press Device initialization.
4th: Take off your cover of your tablet/phone and see the sticker for the Model Number and the Serial Number and type it in.
5th: Sit back and wait for 10 - 120 minutes and it should be done!
(Not all steps have been written down in this post. You'll see it in the Smart Switch app for Windows.)
That should do it!
Hope I helped,
Jonathan
Click to expand...
Click to collapse
Thank you very much Jonathan. Your words are more comforting than you know and much appreciated. It'll be late today before I've time to test this out but I'll get back with you either way.
Best regards,
Dr Dan :victory:

drdan123 said:
Thank you very much Jonathan. Your words are more comforting than you know and much appreciated. It'll be late today before I've time to test this out but I'll get back with you either way.
Best regards,
Dr Dan :victory:
Click to expand...
Click to collapse
Hi Jonathan,
I got the back cover off and found something that I suspect is the serial number. It is SNR32CB01G4SN. Does that seem right to you? Inside the back cover (plastic) is KIGDSW1102 504B. Regardless it never asks for a serial number.
Your instructions call for a model number. I could not find one inside the back cover. The smart switch PC app is calling for a model name. There is no place for a serial number. The app will not accept GT-N8013 in the name space nor will it accept Samsung Galaxy Note 10.1.
I don't know what other info I can give it. What do you recommend?
Thanks for helping me get started,
Dr Dan

drdan123 said:
Hi Jonathan,
I got the back cover off and found something that I suspect is the serial number. It is SNR32CB01G4SN. Does that seem right to you? Inside the back cover (plastic) is KIGDSW1102 504B. Regardless it never asks for a serial number.
Your instructions call for a model number. I could not find one inside the back cover. The smart switch PC app is calling for a model name. There is no place for a serial number. The app will not accept GT-N8013 in the name space nor will it accept Samsung Galaxy Note 10.1.
I don't know what other info I can give it. What do you recommend?
Thanks for helping me get started,
Dr Dan
Click to expand...
Click to collapse
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.

drdan123 said:
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.
Click to expand...
Click to collapse
I actually starting to think that twrp is just not the right recovery for Note 10.1. When I was trying to flash the original software it happened to me too. It just has a bug or insufficiency to install system on some roms. Here is what I did:
-Installed gnabo rom for a system base. I STRONGLY SUGGEST THAT YOU FLASH THE SAME BASED ROM WITH THE ROM YOU WANT TO FLASH.
-Wipe everything EXCEPT system.
-Flash the rom you want. In my case it was the stock rom.
Well, not a proper, solid solution but if it's working, who cares?

Hi furkey,
I also saw the gnabo room. I got 6 files...
Gnabo room v8
N801x+v6. Zip
Update-supersu-v1. 99.zip
Gt-n8013-kk-WiFi -fix .zip
Stock-gt-n8000-leaked-kk-boot.img-cwr-installer.zip (really a convoluted name?)
V8-final-fix.zip
I was unable to get the kernal. Each attempt sent me to the playstore to install Mega drive. I have it already installed and am fully subscribed but...
I wrote Mikyno (the creator of gnabo) asking for help but never heard back.
The morass of gnabo files is bewildering. I don't know what I need and don't need and how or with what tools to load them.
I'm pretty sure I need the kernal as I understand it the kernal is the interface between hardware and software. Without it and without some guidance or support from the creator I gave up.
Then I spent a couple of days trying to locate a 4.1,2 stock firmware (ready to give up on roms altogether) . There were several published but all links have expired and the posters do not respond. Sammobile requires a puzzle be solved to register. I spent several hours trying to make my tablet move a puzzle piece. No success.
Finally I gave up and reloaded the blisspop I'd installed to start this journey. It is a bit flakey at times but it's all I have. I cannot go forward and cannot go backward.
Any directions you can send my way are much appreciated.
Dr Dan

Hello,
I too am experiencing this. I really can't throw this device away. I have even tried a stock rom from high on android. Downloaded and used odin to flash to no avail. I hope anyone will have an answer or another stock rom or anything!
Thank you!
Tony

Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan

drdan123 said:
Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan
Click to expand...
Click to collapse
Dr. Dan!
of course! here's the link:
http://rootgalaxynote.com/galaxy-note-10-1-2/how-to-unrootunbrick-galaxy-note-10-1-factory-firmware/
the link to download the rom is here:
http://stockroms.net/file/GalaxyNote10.1/N8013/N8013UEALI3_N8013XARALI3_XAR.zip
i have not tried the blisspop rom. I believe I was using the latest twrp.

Just do what I said in the first place. It worked out for me and I have a strong feeling that it will work out for you too (well, hopefully). You can use just the main rom file, not thinking others are required too. Or you can simply flash the tab s sensation rom instead of gnabo rom. It can be found in this page: http://forum.xda-developers.com/galaxy-note-10-1/development/gnabo-rom-x-tab-s-feature-t3164779. Notify me if you succeed or not.
And do not forget to mention me otherwise I may not notice that you have wroten to me.

badteddy said:
Dr. Dan!
of course! here's the link:
http://rootgalaxynote.com/galaxy-note-10-1-2/how-to-unrootunbrick-galaxy-note-10-1-factory-firmware/
the link to download the rom is here:
http://stockroms.net/file/GalaxyNote10.1/N8013/N8013UEALI3_N8013XARALI3_XAR.zip
i have not tried the blisspop rom. I believe I was using the latest twrp.
Click to expand...
Click to collapse
Hi Tony,
Thanks much for the links. That site has always given me grief. When I select download it simply takes me back to the same page to select download again etc. This time your 2nd link worked! Great day. I got the file, unzipped it, removed the ". Md5" extension and ran the md5 Checker. It failed. I hope you checked yours before installing it. Is there any other place I can get that file. Upon returning to the same page to dl the file again I got stuck back in the old circle I have always found myself in.
On anther note; I think furkey is stepping in to help. He wants us to try the gnabo rom. It looks good but there are 7 files needed. I don't know if furkey was referring to you or to me in his last post. I'll ask and see. I think he can easily clear the air on what is needed to load gnabo.
I also am using the latest twrp (2.8.6 I think).
I'll get back when I learn more.
Dr Dan

furkey said:
Just do what I said in the first place. It worked out for me and I have a strong feeling that it will work out for you too (well, hopefully). You can use just the main rom file, not thinking others are required too. Or you can simply flash the tab s sensation rom instead of gnabo rom. It can be found in this page: http://forum.xda-developers.com/galaxy-note-10-1/development/gnabo-rom-x-tab-s-feature-t3164779. Notify me if you succeed or not.
And do not forget to mention me otherwise I may not notice that you have wroten to me.
Click to expand...
Click to collapse
Hi furkey,
Thanks much for stepping in. I'm assuming you mean me instead of (possibly in addition to) badteddy.
I'd never heard of the tab s rom. It looks really good. The gnabo scares me a little. My concern is you likely have flashed more support software than I. What works for you may well crash mine.
The tab s rom was given without an md5 so I can only hope I got a good download.
Once I've rebuilt my courage I'll give it a go and report back to you (and badteddy) with results.
Best regards,
Dr Dan
I don't recall a stylus on the tab s. Does this rom support the active stylus? Do you know if there is an addon that will include support of not? I'll also ask the creator but I've yet to hear back from any rom maker save the sweet lady that made the blisspop rom.... Needy blonde.

drdan123 said:
Hi furkey,
Thanks much for stepping in. I'm assuming you mean me instead of (possibly in addition to) badteddy.
I'd never heard of the tab s rom. It looks really good. The gnabo scares me a little. My concern is you likely have flashed more support software than I. What works for you may well crash mine.
The tab s rom was given without an md5 so I can only hope I got a good download.
Once I've rebuilt my courage I'll give it a go and report back to you (and badteddy) with results.
Best regards,
Dr Dan
I don't recall a stylus on the tab s. Does this rom support the active stylus? Do you know if there is an addon that will include support of not? I'll also ask the creator but I've yet to hear back from any rom maker save the sweet lady that made the blisspop rom.... Needy blonde.
Click to expand...
Click to collapse
It's not a Tab S rom. It's a Note 10.1 rom with Tab S features in it like new touchwiz, file explorer and etc. Your s-pen will work on this rom.

drdan123 said:
Hi badteddy,
Perhaps we can work this out together. I'd like to try out the stock rom you have. I went to the site but was unable to search very well at all and could not find any stock roms. Can you send me a download link to it? I assume it is for the UEUCOI1 build. I think anything close should work. I also assume your tablet is the GT-N8013 Wifi only version.
Have you loaded the blisspop rom and twrp both? I have both working as advertised with a minor improvement.
Looking forward to hearing from you ,
Dan
Click to expand...
Click to collapse
OK. I tried out the Tab S Sensation Rom. It is outstanding. Here is a link that shows what I did,
http://forum.xda-developers.com/showpost.php?p=67440486&postcount=342
Furkey recommended it and he was spot on!
I was never able to dl the link you gave but I did find the file and checksum on a different mirror. I finally got it but have no use for it as the tab s room works better than the stock.
Enjoy,
Dr Dan

furkey said:
It's not a Tab S rom. It's a Note 10.1 rom with Tab S features in it like new touchwiz, file explorer and etc. Your s-pen will work on this rom.
Click to expand...
Click to collapse
You are the greatest. That rom is everything you said it would be. Wish I'd found it 2 years ago.
Best regards,
Dr Dan

drdan123 said:
You are the greatest. That rom is everything you said it would be. Wish I'd found it 2 years ago.
Best regards,
Dr Dan
Click to expand...
Click to collapse
You're welcome mate. I am glad that worked out for you

drdan123 said:
Update :
After experimenting and pushing a bunch of buttons I was able to get it to accept the model name as GT-N8013 and the serial number as written above except that I omitted the first 2 letters (SN). The search then reported...
"'GT-N8013' does not support initializing. Please contact our service center."
Looks like I'm still up the proverbial Creek. Stuck in TWRP never never land.
Thanks for trying ,
Dr Dan
Update. Upon reading about smart switch it says it is only good for devices with android 4.3 or higher. This tablet in its last update was 4.1.2. The last rom I had (Blisspop) was 5.1.1 but I doubt samsung would accept that as valid software.
Conclusion, smart switch is a dead end. I'm hoping to make either gnoba or hyperdrive rom work but am having a hard time getting the files needed. Also cannot make Sammobile site work so I cannot get the original firmware to flash.
I'll keep swinging as long as I can.
Click to expand...
Click to collapse
Hello, drdan123,
I am Jonathan Kang, and I'm using my secondary account.
So try to use Samsung Kies because it probably supports older devices. Smart Switch is for the newer devices. I hope I helped!