So I have this weird problem, I wanted to root my phone so I did a factory reset from the stock recovery. The phone boots up like normal and i start clicking thru the setup. The I need to enter in my wifi password so i click on the password field and nothing happens, the keyboard is not showing up on the screen. I would assume that the system has been damaged in some way so that the stock keyboard isn't working. I got past the wifi screen by deactivating the wifi password but now I can't get past the google account verification. Note that adb debugging is off and I can't turn it on as the setup is not completed.
My phone is a Blu Life One X(2016) with stock recovery
You can download the google keyboard using this link:
http://www.apkmirror.com/apk/google...load-arm64-v8a-android-apk-download/download/
Hope it works if yes then please press the thanks button
Regards milkyway3
milkyway3 said:
You can download the google keyboard using this link:
http://www.apkmirror.com/apk/google...load-arm64-v8a-android-apk-download/download/
Hope it works if yes then please press the thanks button
Regards milkyway3
Click to expand...
Click to collapse
How would I go about installing the keyboard? As the setup is not completed I don't have access to the phone. Is there a way to flash an apk from a computer?
JazzzoooHere said:
How would I go about installing the keyboard? As the setup is not completed I don't have access to the phone. Is there a way to flash an apk from a computer?
Click to expand...
Click to collapse
If you can unlock your device then you can just copy the apk from pc to your device using a usb cable and then install it hazzlefree
Regards milkyway3
milkyway3 said:
If you can unlock your device then you can just copy the apk from pc to your device using a usb cable and then install it hazzlefree
Regards milkyway3
Click to expand...
Click to collapse
Sadly I need to enter in my google account credentials to pass the setup to unlock the phone. I have tried some bypasses of the google account verification but nothing seems to work.
JazzzoooHere said:
Sadly I need to enter in my google account credentials to pass the setup to unlock the phone. I have tried some bypasses of the google account verification but nothing seems to work.
Click to expand...
Click to collapse
Was usb debugging enabled in developer options?
Regards milkyway3
If usb debugging enabled then do the following:
WARNING : I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE. DO IT AT YOUR OWN RISK.
Download cdc driver from here:
http://gsmusbdriver.com/blu-life-one-x-2016
Download flashing software qfil from here:
https://androiddatahost.com/fgd43
Now follow the steps below
This will install stock firmware on your device
All the best
Please push the thanks button if it helped you out
Regards milkyway3
Have you tried resetting the phone via recovery again?
Ok I have solved it, I downloaded a twrp backup onto my phone, then I flashed twrp with SPflash tool and installed the backup
JazzzoooHere said:
Ok I have solved it, I downloaded a twrp backup onto my phone, then I flashed twrp with SPflash tool and installed the backup
Click to expand...
Click to collapse
Regards milkyway3
Related
I have this Livefan L1 tablet gadgetsdealer.com/product112773.html now it stuck on too many pattern attempt screen and not know google account. Try following for reset but failed
Sqlite3 command but it not have sqlite installed
Recovery boot not have reset function only Android guy with open belly exclamation mark
Try to flash CWM recovery but failed due to bin/sh not exist
Even Adb Shell command also failed
Now only way left flash it using livesuite but not have firmware so if anyone have then please upload it as quickly as possible and if anyone know other way than above to reset it then please post. Waiting for your kind response.
Kind regards
wsw243 said:
I have this Livefan L1 tablet gadgetsdealer.com/product112773.html now it stuck on too many pattern attempt screen and not know google account. Try following for reset but failed
Sqlite3 command but it not have sqlite installed
Recovery boot not have reset function only Android guy with open belly exclamation mark
Try to flash CWM recovery but failed due to bin/sh not exist
Even Adb Shell command also failed
Now only way left flash it using livesuite but not have firmware so if anyone have then please upload it as quickly as possible and if anyone know other way than above to reset it then please post. Waiting for your kind response.
Kind regards
Click to expand...
Click to collapse
had the same problem..same tablet..u need a LAN to USB ADAPTER
plug in a lan cable which has internet enabled enter ur user name n pswd for gmail..n ur good to go
saifjaf said:
had the same problem..same tablet..u need a LAN to USB ADAPTER
plug in a lan cable which has internet enabled enter ur user name n pswd for gmail..n ur good to go
Click to expand...
Click to collapse
What if you not know google account which set in this tablet? I solved my problem by flash firmware download from official website midlele. com
Regards
wsw243 said:
What if you not know google account which set in this tablet? I solved my problem by flash firmware download from official website midlele. com
Regards
Click to expand...
Click to collapse
then i guess flashing is the only way out!
hello, i have a chines tablet called GAOXIN with android 4.0
after too many failed pattern attempts, it's giving me this message :"to unlock ,sign in with your google gmail"
i have entered my email and password but it's giving me incorrect username or password. i think it's giving me that message because i'm not connected to internet, i'm trying to connect to wifi but i cant't go to settings before passing this message
please help me,THANK YOU IN ADVANCE
hello, i have a chines tablet called GAOXIN with android 4.0<br />
after too many failed pattern attempts, it's giving me this message :"to unlock ,sign in with your google gmail"<br />
i have entered my email and password but it's giving me incorrect username or password. i think it's giving me that message because i'm not connected to internet, i'm trying to connect to wifi but i cant't go to settings before passing this message<br />
please help me,THANK YOU IN ADVANCE
Click to expand...
Click to collapse
This happened to me with my One S. I think I had to do a factory reset. But try connecting to the internet first. Or rebooting. Cache wipe? Hard reboot.
sauprankul said:
This happened to me with my One S. I think I had to do a factory reset. But try connecting to the internet first. Or rebooting. Cache wipe? Hard reboot.
Click to expand...
Click to collapse
there is no recovery in this tablet , and i can't connect to wifi
aflefel said:
there is no recovery in this tablet , and i can't connect to wifi
Click to expand...
Click to collapse
wut.
No recovery? Really? I'm pretty sure it comes with a stock recovery on it, which can be used for basic functions like wiping.
I don't mean custom recovery. Just try seeing what happen when you hold power +vol up or vol down (try both).
EDIT: Oh I see. It's a Chinese tablet... well, damn.
If there isn't a recovery, then maybe you can use something like Android device manager? I'm really at a loss.
sauprankul said:
wut.
No recovery? Really? I'm pretty sure it comes with a stock recovery on it, which can be used for basic functions like wiping.
I don't mean custom recovery. Just try seeing what happen when you hold power +vol up or vol down (try both).
EDIT: Oh I see. It's a Chinese tablet... well, damn.
If there isn't a recovery, then maybe you can use something like Android device manager? I'm really at a loss.
Click to expand...
Click to collapse
i'll try i, thx for helping
aflefel said:
hello, i have a chines tablet called GAOXIN with android 4.0
after too many failed pattern attempts, it's giving me this message :"to unlock ,sign in with your google gmail"
i have entered my email and password but it's giving me incorrect username or password. i think it's giving me that message because i'm not connected to internet, i'm trying to connect to wifi but i cant't go to settings before passing this message
please help me,THANK YOU IN ADVANCE
Click to expand...
Click to collapse
try my guide
http://forum.xda-developers.com/showthread.php?p=44413989#post44413989
.
.
there r some problem in the link
so download from here
http://d-h.st/rCh
.
http://adbdriver.com/upload/AdbDriverInstaller.exe
prantoroy said:
try my guide
http://forum.xda-developers.com/showthread.php?p=44413989#post44413989
.
.
there r some problem in the link
so download from here
http://d-h.st/rCh
.
http://adbdriver.com/upload/AdbDriverInstaller.exe
Click to expand...
Click to collapse
Thx buddy it's works
aflefel said:
Thx buddy it's works
Click to expand...
Click to collapse
You. Are. Welcome.
i lucked we lucked out... Cerberus was installed and i was able to send an "unlock" txt command. it unlocked but still wanted password after locking again, even when we changed it to PIN lock code. but we where able to turn WiFi on and then the username and password where accepted.
i knew that app would pay off
fix too many pattern attempts android
Factory reset is the best option to restore android device pattern, but after doing this you can lose your contacts and other applications or data. So if factory reset is not suitable for you then you can try the other stuffs:-
Firstly connect your device with your desktop or laptop by using USB cord, but make sure that USB debugging is enabled on your device after that go to ADB Command prompt and type the following commands.
Commands:-
• Adbshell
• cd/data/data/com.android.providers.settings/databases
• sqlite3 settings.db
• update system set value=0 where name=’lockpatternautolock’;
• update system set value=0 where name=’lockscreen.lockedout permanently’;
• .quit
More information visit: what-is.in/howto/reset-android-pattern-after-too-many-wrong-attempts.html
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Anyone? Still locked out of my phone. :crying:
Reboot normaly > go to settings > developer setting > oem unlock check yes
#gggirlgeek
Reboot normaly > go to settings > developer setting > oem unlock > check yes
I can't get into the phone at all. It is FRP (Google) locked because I did a factory reset from recovery. I can only manipulate it from PC or stock recovery. I have ADB, Odin and Samsung Kies on my PC if that helps.
What is the reason I am getting the ODIN error: "Complete(Write) operation failed"? Is it due to the FRP lock?
If not, would flashing the same stock firmware even help? (I have read that it's not possible to flash older firmware versions.)
Is the boot partition where the FRP status is stored? Is it possible to flash a new boot image to reset it?
I assume flashing a custom recovery would be useless? I doubt it could be done without USB debugging/ADB being enabled anyway.
One of the reason for that odin error is flashing an old build of stock ROM, your guess is right
Even if you are able to flash a stock FW via ODIN you'll still not be able to boot to your OS.
You have to login using the same google id that was previously logged in
OR you have to bypass the Google Account Login Screen.
There are varous method on youtube (i know you saw them) to bypass that screen (Side Sync method worked for me at the 10th attempt) inorder to install a 3rd party app either to
1. enable the developer option or enable OEM unlock ( to flash custom ROM or custom recovery)
OR
2. to overwrite the previous google account saved with your new account details. (THIS ONE HELPED ME)
WITH FRP LOCK ON, ODIN SHOULD NOT GIVE YOU ERROR ONLY IF YOU ARE FLASHING STOCK ROM. BUT STILL YOU WILL BE LOCKED WITH GOOGLE ACCOUNT LOGIN SCREEN BECAUSE OF FRP LOCK ON AND STOCK ROM
FRP info. is saved in Sboot. Flashing a new sboot works only for devices those were never upgraded to Android 6. For J7 2015 that was upgraded to android 6, flashing Sboot bricks the phone as said by a cell phone repair agent
Regards,
Sid
@saddam.khan999 : Thank you so much for replying. This is helpful. :highfive:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Tried different USB ports, and even different PC's to get it to pop up on the phone. Tried old usb drivers too. Sidesync never senses it, and My Computer only show MTP folder that won't accept any file pasted to it.
You did this with Android 6.0.1 October 2016 update? They fix more holes every time.
Also, can you give me the link to the unlock tutorial you used with Sidesync? Just want to compare my method.
Hi,
gggirlgeek said:
This is helpful. :highfive:
Click to expand...
Click to collapse
How grateful I am to read the above line! Thanks :good:
gggirlgeek said:
You did this with Android 6.0.1 October 2016 update?
Click to expand...
Click to collapse
Yes on Android 6.0.1 but i dont remember the build date.
gggirlgeek said:
Also, can you give me the link to the unlock tutorial you used with Sidesync?
Click to expand...
Click to collapse
I tired two different tutorials of SideSync to crack it. Once I reach home in the next 10 hours from now. I'll search on youtube and give u the links. Right now I cannot remember it.
gggirlgeek said:
What did you do to get the sidesync to work? Mine wouldn't even connect to Sidesync on my PC.
Click to expand...
Click to collapse
I followed below step to fix popup issue
1. Uninstall all samsung apps like, Kies, SmartSwitch, SideSync everything.
2. Uninstall Samsung USB drivers
3. Install SmartSwicth (to get best drivers)
4. Now install SideSync (latest)
5. Open SideSync and check for OTA updates in your PC (update it if available)
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
gggirlgeek said:
I give up. I'm going to pay somebody. He can use one of those low-level programs to unlock it remotely. It only costs $15. Well worth it. Wish me luck!
Click to expand...
Click to collapse
@gsmDabbler this guy says he/she can solve FRP issue for 5$ on skype. I dont know if he's fake or real. Best of luck
1. At welcome screen push next.
2. Connect to wifi and push next.
3. Accept terms and conditions and push next
4. Attempt to sign in to your google account.
5. On loopback to sign in page, push back intel you see the welcome screen again.
6. Push emergency dialer.
7. Dial 112
8. Put in on speaker and when the disbatcher askes what is your emergency, quickly swipe where the speaker option is to your left and click on email.
9. Ask the disbatcher for the number for non-emergency. (EXTREAMLY IMPORTANT TO NOT SKIP THIS STEP)
10. Sign into your email.
11. Compose a new message.
12. On another device download drive.google.com/file/d/0B3quVdCaxqLfaG9VY2xjd3hhWmM/view?usp=drivesdk[/url]
13. Move this file to a microsd card, and put it into the j7.
14. Push attach
15. Locate your sdcard and select es file explorer.
16. Once attached to the email, click on the box inside the email that says es file explorer. If redirected to security setting check the box that says "Unknown Sources".
17. If then redirected to install screen for es file explorer, install app and skip the next step.
18. Push back intel your on the screen with your new composed email with attachment, and once again click on es file explorer, and then install...
19. After install, restart your phone.
20. On welcome screen, plug your j7 into a power source.
21. Toggle your power button off, and then back on.
22. Click on the far right last bubble.
23. On home screen of es file explorer, take the sdcard out of the j7 and put back into the extra device you downloaded es file explorer to, and download these 2 files.
drive.google.com/file/d/0B3quVdCaxqLfNVFvMHlOWnNnY2M/view?usp=drivesdk[/url]
&
drive.google.com/file/d/0B3quVdCaxqLfc0gyRTBTNGNXOTA/view?usp=drivesdk[/url]
24. Copy these files to your microsd card from earlier, and put back into your j7.
------------> continued to next post of mine!
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip"]J700TUVU2APJ3_J700TTMB2APJ3_TMB[/URL].tar.md5
Where I got firmware: qc3.androidfilehost.com/dl/T2pLZbjUe0enTeLqQNLjsA/1482428974/385035244224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip[/URL]
Click to expand...
Click to collapse
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
?guys...no.. just Go to settings tap build 7 times go to developer options, turn on oem unlock, turn on usb debugging.ta dah.
mohitmallick17 said:
Its simple. Just flash the latest firmware through odin and you'll be booted on stock.
Don't forget to turn on OEM unlock next time
Click to expand...
Click to collapse
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
victhesunshine said:
^^^^^^ Does flashing the latest firmware really work
?????????????????????????????????????????????
Click to expand...
Click to collapse
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
gggirlgeek said:
Hello,
I wonder if someone would help me FRP unlock my phone. It is a T-mobile sm-J700t 2015. I have searched the forum but don't see a clear answer.
I have tried (from Youtube) the USB cable method, the camera method and flashing the 10/2016 stock firmware through ODIN. In Odin I get an error: "Complete(Write) operation failed". I cannot turn on USB debugging of course because I cannot get into the device. Haven't tried updating with Kies yet because I'm nervous they'll patch any additional back doors I could try.
I am somewhat experienced at flashing and such and I think there must be a way to completely wipe the device and flash new firmware but I don't see instructions for that.
Thanks in advance!
Odin v3.10.7 & v3.12.3
Recovery: Haven't changed
USB installed from Samsung Kies (made sure Kies isn't running)
Firmware: J700TUVU2APJ3_J700TTMB2APJ3_TMB.tar.md5
Where I got firmware: https://qc3.androidfilehost.com/dl/...224401143/J700TUVU2APJ3_J700TTMB2APJ3_TMB.zip
Click to expand...
Click to collapse
Saw a same issue please check & follow this steps if it helps you some way.
Download the latest samfirm tool available on xda.
Open the samfirm tool. Enter model and region. Tick Auto and binary nature.
Click on Check update. It will show the latest firmware available on samsung server.
Then click on download. It will download four file full firmware. Then flash it through odin.
You need a strong internet connection to download the file.
fullofhell said:
Just take out your battery and reboot, turn oem unlock on and do whatever.its simple.
Click to expand...
Click to collapse
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
hightech316 said:
Not so simple.
During FRP Lock you are restricted to the google sign in page, locked out of everything else. Cannot even pull down the status bar. So no way to get to settings.
This can be done via ADB , but only if you had USB Debugging enabled prior.
I just obtained a used J7000T1 and FRP lock is activated , Even on the bootloader it displays "FRP Locked" . USB Debugging was never enabled .
If I find a way , I'll post. Any one have luck yet?
Once " FRP Locked " is off the bootloader, I'm sure we can just load a recovery / rom via Odin .... But that's where I am a stuck of course.
Click to expand...
Click to collapse
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
fullofhell said:
I had this happen last Feb when I got the phone and was trying to install twrp, and it says frp lock when I tried flashing the recovery tar via odin. I literally took out the battery rebooted back into the OS and turned on oem unlock and USB Debugging and it was fine then when I flashed twrp. I have never heard of this other issue u speak of. The phone has an unlocked bootloader to begin with. If u are stuck in a Google sign in page, I would download the Samsung z3 tool and make sure u have drivers installed and unlock the frp that way.it does have an option for frp lock
Click to expand...
Click to collapse
Thanks.
Drivers are installed.
Just cannot move from the google sign in.
There is a guide that shows how to use a USB drive with a shortcut apk on it , hooked up via OTG and is able to open settings. Although that did not work for me as well...
Maybe N version is different than MM ?
Almost the same problem here.....but in my j700f, I can't boot to recovery at all...can't flash stock firmware also due frp locked
Phone got infected by several malware and root it. I can't connect my phone to my pc. Settings>Storage>USB computer connection is disabled. Settings>About Phone>Build Number is hidden. I tried to dial *#0808# and *#0808#, but it fails. I tried the factory reset but the malware is still there. Can't install apk from google play because Download Manager was uninstalled. Please help me. I just want to enable the USB computer connection so I can flash my stock ROM
pryxen said:
Phone got infected by several malware and root it. I can't connect my phone to my pc. Settings>Storage>USB computer connection is disabled. Settings>About Phone>Build Number is hidden. I tried to dial *#0808# and *#0808#, but it fails. I tried the factory reset but the malware is still there. Can't install apk from google play because Download Manager was uninstalled. Please help me. I just want to enable the USB computer connection so I can flash my stock ROM
Click to expand...
Click to collapse
You need to flash your stock rom in fastboot mode. No need of connect your phone in usb mass storage.
Ashwinrg said:
You can flash your stock rom in fastboot mode. No need of connect your phone in usb mass storage.
Click to expand...
Click to collapse
Sir I don't have fastboot in my phone. All I can see is the recovery mode.
pryxen said:
Sir I don't have fastboot in my phone. All I can see is the recovery mode.
Click to expand...
Click to collapse
Your phone must have fastboot.
Would be handy if you told us what brand and model phone you are talking about. So we can tell you the exact shortcut for fastboot. Because it can vary on some phones.
NiTrOwow said:
Your phone must have fastboot.
Would be handy if you told us what brand and model phone you are talking about. So we can tell you the exact shortcut for fastboot. Because it can vary on some phones.
Click to expand...
Click to collapse
my phone is Starmobile UP HD sir.
pryxen said:
my phone is Starmobile UP HD sir.
Click to expand...
Click to collapse
Try your Luck. When you need Help, just Quote.
I advise you to close the Ad if you got not an Blocker.
http://firmwares2you.blogspot.co.at/2015/08/star-mobile-up-hd-firmwarestock-rom-to.html#
Silversniper said:
Try your Lock. When you need Help, just Quote.
I advise you to close the Ad if you got not an Blocker.
http://firmwares2you.blogspot.co.at/2015/08/star-mobile-up-hd-firmwarestock-rom-to.html#
Click to expand...
Click to collapse
thank you sir for the link I will try it right away.
Just reply. When any Error left or Misunderstandings, something Unclear just Quote.
Greetings, Galaxy S20 FE inherited but password locked even after factory reset, can not enter into usb debugging any solutions?
Hard resetting doesn't remove password? Are you sure about that? You did it from the recovery and completely wiped everything?
That is impossible so I'm guessing you mean FRP.
Do you see this message " This device was reset. To continue, sign in with a Google Account that was previously synced on this device. " on your phone?
If so then follow this guide to help you with bypassing it. I recommend resetting the phone again but from the menu after you're done.
You can also follow this guide, it uses different method should the first fail. You can get your phone stock ROM from here.
Goodluck.
XDHx86 said:
Hard resetting doesn't remove password? Are you sure about that? You did it from the recovery and completely wiped everything?
That is impossible so I'm guessing you mean FRP.
Do you see this message " This device was reset. To continue, sign in with a Google Account that was previously synced on this device. " on your phone?
If so then follow this guide to help you with bypassing it. I recommend resetting the phone again but from the menu after you're done.
You can also follow this guide, it uses different method should the first fail. You can get your phone stock ROM from here.
Goodluck.
Click to expand...
Click to collapse
Thank you. I downloaded my rom from Sam firmware and extracted the but when I changed the ap file to a zip I needed a password to extract it to create combination file
Issue was resolved thank you kindly for responding
Fixed by @hainguyenthao