Related
Something went wrong while flashing CWM on my TF300T. It showed successful in cmd window on pc, but the statusbar on my pad kept showing 100% but nothing happend (no message or automaticly rebooting). After waiting 10 minutes or so, I turned off the device and restarted it.
Now the device is not started up anymore, keeps stuck on message:
"The Device is Unlocked".
When I try te start it up in Fastboot ( pwr+vol down) the screen get stuck on message:
"The Device is Unlocked.
Android cardhu-user bootloader <2.10 e> released by "ww_epad-9.4.3.29-20120511" A03
Checking for android ota recovery
Booting recovery kernel image"
Now the pad is not starting up the ROM and I can't get in fastboot mode anymore.
The solutions given in other treads about a simular problem, you need to put your pad into USB mode.
But that is not posible anymore.
Is there any other solution for this problem??
Thanks guy's
problem
I also have the same brick .... like it ....
Hello,
me too...
Tablet starts always automatically into CWM recovery.
Fastboot and ADB doesnt work either...
Could it be ADB isnt working because debugging mode isnt activated?
But how can I change without a working android?
Is there someone out there who can help me out of this problem?
Or is RMA the only solution?
But I dont want to send my transformer to asus so they can change the motherboard. Its only a software problem...
Can someone help me? Please
Give it what it is looking for and hope for the best. Stock update ( ww_epad-9.4.3.29-20120511 ) If when plugged into pc you have access to internal sdcard put it there, if not put it on external sdcard and reboot unit. If that does not load update try to get into fastboot as you mention above maybe it will install from there since it tells you ( Checking for android ota recovery ).
Good Luck!
If you downloaded the file from asus you will need to unzip once and still have a zip but slightly different name!
tobdaryl said:
Give it what it is looking for and hope for the best. Stock update ( ww_epad-9.4.3.29-20120511 ) If when plugged into pc you have access to internal sdcard put it there, if not put it on external sdcard and reboot unit. If that does not load update try to get into fastboot as you mention above maybe it will install from there since it tells you ( Checking for android ota recovery ).
Good Luck!
If you downloaded the file from asus you will need to unzip once and still have a zip but slightly different name!
Click to expand...
Click to collapse
Hello tobdaryl,
thanks for your answer!
Unfortunately I dont have access to internal sdcard... also I cant get into fastboot mode...
I think ADB could help, but I cant get ADB to work. I have to activate usb debugging, right?
But how could I do without starting Android?
Droid_1 said:
Hello tobdaryl,
thanks for your answer!
Unfortunately I dont have access to internal sdcard... also I cant get into fastboot mode...
I think ADB could help, but I cant get ADB to work. I have to activate usb debugging, right?
But how could I do without starting Android?
Click to expand...
Click to collapse
place it on external sdcard if you can't access internal. if this works you don't need adb or fastboot. we are trying to let your unit update for you and clear your problem. as far as fastboot I'm only suggesting do as you said about trying to go into fastboot as when you received the message about update.
sounds harder than it is.
place update on external sdcard. reboot, if no love reboot into fastboot as when you received update message. at that point we hope your unit will auto install the update for you.
time is all you might loose.
Good Luck!:good:
tobdaryl said:
place it on external sdcard if you can't access internal. if this works you don't need adb or fastboot. we are trying to let your unit update for you and clear your problem. as far as fastboot I'm only suggesting do as you said about trying to go into fastboot as when you received the message about update.
sounds harder than it is.
place update on external sdcard. reboot, if no love reboot into fastboot as when you received update message. at that point we hope your unit will auto install the update for you.
time is all you might loose.
Good Luck!:good:
Click to expand...
Click to collapse
Hey tobdaryl,
my transformer didnt recognized the external sd...
But I made it out of the cwm loop.
Nonetheless many thanks for your help! :good:
Droid_1 said:
Hey tobdaryl,
my transformer didnt recognized the external sd...
But I made it out of the cwm loop.
Nonetheless many thanks for your help! :good:
Click to expand...
Click to collapse
Great!!!
Could you give quick info how you recovered? Several others are waiting for resolve same problem.
tobdaryl said:
Great!!!
Could you give quick info how you recovered? Several others are waiting for resolve same problem.
Click to expand...
Click to collapse
Sorry, I forgot to post the link
http://forum.xda-developers.com/showthread.php?p=32787029#post32787029
Droid_1 said:
Sorry, I forgot to post the link
http://forum.xda-developers.com/showthread.php?p=32787029#post32787029
Click to expand...
Click to collapse
Thanks for sharing and taking the time to create a thread for others to use.
Good Luck!
hello, i have a chines tablet called GAOXIN with android 4.0
after too many failed pattern attempts, it's giving me this message :"to unlock ,sign in with your google gmail"
i have entered my email and password but it's giving me incorrect username or password. i think it's giving me that message because i'm not connected to internet, i'm trying to connect to wifi but i cant't go to settings before passing this message
please help me,THANK YOU IN ADVANCE
hello, i have a chines tablet called GAOXIN with android 4.0<br />
after too many failed pattern attempts, it's giving me this message :"to unlock ,sign in with your google gmail"<br />
i have entered my email and password but it's giving me incorrect username or password. i think it's giving me that message because i'm not connected to internet, i'm trying to connect to wifi but i cant't go to settings before passing this message<br />
please help me,THANK YOU IN ADVANCE
Click to expand...
Click to collapse
This happened to me with my One S. I think I had to do a factory reset. But try connecting to the internet first. Or rebooting. Cache wipe? Hard reboot.
sauprankul said:
This happened to me with my One S. I think I had to do a factory reset. But try connecting to the internet first. Or rebooting. Cache wipe? Hard reboot.
Click to expand...
Click to collapse
there is no recovery in this tablet , and i can't connect to wifi
aflefel said:
there is no recovery in this tablet , and i can't connect to wifi
Click to expand...
Click to collapse
wut.
No recovery? Really? I'm pretty sure it comes with a stock recovery on it, which can be used for basic functions like wiping.
I don't mean custom recovery. Just try seeing what happen when you hold power +vol up or vol down (try both).
EDIT: Oh I see. It's a Chinese tablet... well, damn.
If there isn't a recovery, then maybe you can use something like Android device manager? I'm really at a loss.
sauprankul said:
wut.
No recovery? Really? I'm pretty sure it comes with a stock recovery on it, which can be used for basic functions like wiping.
I don't mean custom recovery. Just try seeing what happen when you hold power +vol up or vol down (try both).
EDIT: Oh I see. It's a Chinese tablet... well, damn.
If there isn't a recovery, then maybe you can use something like Android device manager? I'm really at a loss.
Click to expand...
Click to collapse
i'll try i, thx for helping
aflefel said:
hello, i have a chines tablet called GAOXIN with android 4.0
after too many failed pattern attempts, it's giving me this message :"to unlock ,sign in with your google gmail"
i have entered my email and password but it's giving me incorrect username or password. i think it's giving me that message because i'm not connected to internet, i'm trying to connect to wifi but i cant't go to settings before passing this message
please help me,THANK YOU IN ADVANCE
Click to expand...
Click to collapse
try my guide
http://forum.xda-developers.com/showthread.php?p=44413989#post44413989
.
.
there r some problem in the link
so download from here
http://d-h.st/rCh
.
http://adbdriver.com/upload/AdbDriverInstaller.exe
prantoroy said:
try my guide
http://forum.xda-developers.com/showthread.php?p=44413989#post44413989
.
.
there r some problem in the link
so download from here
http://d-h.st/rCh
.
http://adbdriver.com/upload/AdbDriverInstaller.exe
Click to expand...
Click to collapse
Thx buddy it's works
aflefel said:
Thx buddy it's works
Click to expand...
Click to collapse
You. Are. Welcome.
i lucked we lucked out... Cerberus was installed and i was able to send an "unlock" txt command. it unlocked but still wanted password after locking again, even when we changed it to PIN lock code. but we where able to turn WiFi on and then the username and password where accepted.
i knew that app would pay off
fix too many pattern attempts android
Factory reset is the best option to restore android device pattern, but after doing this you can lose your contacts and other applications or data. So if factory reset is not suitable for you then you can try the other stuffs:-
Firstly connect your device with your desktop or laptop by using USB cord, but make sure that USB debugging is enabled on your device after that go to ADB Command prompt and type the following commands.
Commands:-
• Adbshell
• cd/data/data/com.android.providers.settings/databases
• sqlite3 settings.db
• update system set value=0 where name=’lockpatternautolock’;
• update system set value=0 where name=’lockscreen.lockedout permanently’;
• .quit
More information visit: what-is.in/howto/reset-android-pattern-after-too-many-wrong-attempts.html
So I have this weird problem, I wanted to root my phone so I did a factory reset from the stock recovery. The phone boots up like normal and i start clicking thru the setup. The I need to enter in my wifi password so i click on the password field and nothing happens, the keyboard is not showing up on the screen. I would assume that the system has been damaged in some way so that the stock keyboard isn't working. I got past the wifi screen by deactivating the wifi password but now I can't get past the google account verification. Note that adb debugging is off and I can't turn it on as the setup is not completed.
My phone is a Blu Life One X(2016) with stock recovery
You can download the google keyboard using this link:
http://www.apkmirror.com/apk/google...load-arm64-v8a-android-apk-download/download/
Hope it works if yes then please press the thanks button
Regards milkyway3
milkyway3 said:
You can download the google keyboard using this link:
http://www.apkmirror.com/apk/google...load-arm64-v8a-android-apk-download/download/
Hope it works if yes then please press the thanks button
Regards milkyway3
Click to expand...
Click to collapse
How would I go about installing the keyboard? As the setup is not completed I don't have access to the phone. Is there a way to flash an apk from a computer?
JazzzoooHere said:
How would I go about installing the keyboard? As the setup is not completed I don't have access to the phone. Is there a way to flash an apk from a computer?
Click to expand...
Click to collapse
If you can unlock your device then you can just copy the apk from pc to your device using a usb cable and then install it hazzlefree
Regards milkyway3
milkyway3 said:
If you can unlock your device then you can just copy the apk from pc to your device using a usb cable and then install it hazzlefree
Regards milkyway3
Click to expand...
Click to collapse
Sadly I need to enter in my google account credentials to pass the setup to unlock the phone. I have tried some bypasses of the google account verification but nothing seems to work.
JazzzoooHere said:
Sadly I need to enter in my google account credentials to pass the setup to unlock the phone. I have tried some bypasses of the google account verification but nothing seems to work.
Click to expand...
Click to collapse
Was usb debugging enabled in developer options?
Regards milkyway3
If usb debugging enabled then do the following:
WARNING : I AM NOT RESPONSIBLE IF ANYTHING HAPPENS TO YOUR DEVICE. DO IT AT YOUR OWN RISK.
Download cdc driver from here:
http://gsmusbdriver.com/blu-life-one-x-2016
Download flashing software qfil from here:
https://androiddatahost.com/fgd43
Now follow the steps below
This will install stock firmware on your device
All the best
Please push the thanks button if it helped you out
Regards milkyway3
Have you tried resetting the phone via recovery again?
Ok I have solved it, I downloaded a twrp backup onto my phone, then I flashed twrp with SPflash tool and installed the backup
JazzzoooHere said:
Ok I have solved it, I downloaded a twrp backup onto my phone, then I flashed twrp with SPflash tool and installed the backup
Click to expand...
Click to collapse
Regards milkyway3
i get the "Your device is corrupt" and idk how to boot into the blu spark twrp(i cant get the screen to show). I was on 8.1 and did a system update to 9.0 and i get this error. any ideas? Thanks
bradman117 said:
i get the "Your device is corrupt" and idk how to boot into the blu spark twrp(i cant get the screen to show). I was on 8.1 and did a system update to 9.0 and i get this error. any ideas? Thanks
Click to expand...
Click to collapse
You're going to have to use the MSM Download Tool to flash back to stock to get rid of that message or just ignore it as it doesn't seem to affect anything. There are about 6 or 7 threads on this already. Use the search this forum box and type in device is corrupt.
ajsmsg78 said:
You're going to have to use the MSM Download Tool to flash back to stock to get rid of that message or just ignore it as it doesn't seem to affect anything. There are about 6 or 7 threads on this already. Use the search this forum box and type in device is corrupt.
Click to expand...
Click to collapse
I was watching the youtube video but i cant seem to update my driver. i direct the link to x64
bradman117 said:
I was watching the youtube video but i cant seem to update my driver. i direct the link to x64
Click to expand...
Click to collapse
Make sure you're not using a USB 3.1 port in your pc. A USB 2.0 or 3.0 should work. When I use a 3.1 Port in my PC the software never finds my phone but any other USB port works fine.
delete
I did a troubleshoot and it says " Android bootloader interface cant work properly with 3.0" which i only have 3.0
anyone help please, ive spent all day trying to fix my phone now. after 2-3 hours of trying to get my laptop to see my MSM Download Tool i gave up and went to 9.0.2-PIE-OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9-FASTBOOT and now i cant even boot my phone. I get TWRP flashed but the screen freezes with no touch
bradman117 said:
anyone help please, ive spent all day trying to fix my phone now. after 2-3 hours of trying to get my laptop to see my MSM Download Tool i gave up and went to 9.0.2-PIE-OnePlus6Oxygen_22_OTA_027_all_1810260000_d46787d2c9-FASTBOOT and now i cant even boot my phone. I get TWRP flashed but the screen freezes with no touch
Click to expand...
Click to collapse
You don't need MSN tool at all. Uninstall magisk then flash magisk 17.2
something I come across reflashing files onto my bootloader is
"wiping userdata...
CreateProcess failed: %1 is not a valid Win32 application. (193)
error: Cannot generate image for userdata
Press any key to continue . . ."
I have manually wiped my userdata but still get this error
Delete
Found this is another thread, Hope it helps someone. It helped me.
Install Material Terminal from Play Store
Just type in terminal:
su
reboot "dm-verity enforcing"
Hit enter
Phone will reboot and no more corrupt issue in red.
My daughter locked herself out of a nokia mediatek helio p22 by pin lock. During my relentless searching I came across an article showing how to use fastboot cmd commands to get the userdata pin password encryption and how to decipher it by taking out certain things. To be able to enter into the phone. I CAN'T FIND THE ARTICLE NOW!! . The phone itself will not hard reset by hardware keys. Will not enter into recovery mode only fastboot works. I've tried using many screen unlocking software but they all say device not supported o need usb debugging which I can't enable. Fastboot erase userdata ver throws up errors. Does anyone know the fastbood I'm looking for. I've tried all other possibilities that I can find. Any and all help would be greatly appreciated.
Fastboot operates on device's bootloader, not on Android OS. The FRP code is stored within Android file system what can only get accessed by ADB.
jwoegerbauer said:
Fastboot operates on device's bootloader, not on Android OS. The FRP code is stored within Android file system what can only get accessed by ADB.
Click to expand...
Click to collapse
Correct I know. But the device isn't recognized with adb only fastboot recognizes it. I've tried erasing the device with all fastboot commands and everything results in error. When I try to fastboot recovery it has the no command andriod guy and if I press any hardware buttons it reboot back to lock screen. Do u have any ideas on a work around. Or how to access the userdata using cmd promt?
Try to connect phone in USB-MTP mode via a USB-C cable - requires phone supports USB-C.
@Tlink00
Plug up to your PC and do:
sudo fastboot -w (push enter)
That will format data and erase everything on the device, pictures and all. If you are trying to get in your phone I've been able to delete lockscreen.db and a few other directories using TWRP file manager in the past on OnePlus 6t and also on a few Motorola phone's I've owned. But I believe you have to have encryption disabled to go that route. Best to just wipe it with fastboot -w. Just be sure you know your password to your Google account because if your phones signed in and has a Google account on it the password will be required to use the device again.
Tlink00 said:
My daughter locked herself out of a nokia mediatek helio p22 by pin lock. During my relentless searching I came across an article showing how to use fastboot cmd commands to get the userdata pin password encryption and how to decipher it by taking out certain things. To be able to enter into the phone. I CAN'T FIND THE ARTICLE NOW!! . The phone itself will not hard reset by hardware keys. Will not enter into recovery mode only fastboot works. I've tried using many screen unlocking software but they all say device not supported o need usb debugging which I can't enable. Fastboot erase userdata ver throws up errors. Does anyone know the fastbood I'm looking for. I've tried all other possibilities that I can find. Any and all help would be greatly appreciated.
Click to expand...
Click to collapse
I can send you tools that support the Nokia 2.2/2.3 (I'm assuming from chipset) that can erase user data and frp
areallydumbperson said:
I can send you tools that support the Nokia 2.2/2.3 (I'm assuming from chipset) that can erase user data and frp
Click to expand...
Click to collapse
Yeah...that be great! I'm willing to try anything. But the usb debugging isn't enabled.
flash713 said:
@Tlink00
Plug up to your PC and do:
sudo fastboot -w (push enter)
That will format data and erase everything on the device, pictures and all. If you are trying to get in your phone I've been able to delete lockscreen.db and a few other directories using TWRP file manager in the past on OnePlus 6t and also on a few Motorola phone's I've owned. But I believe you have to have encryption disabled to go that route. Best to just wipe it with fastboot -w. Just be sure you know your password to your Google account because if your phones signed in and has a Google account on it the password will be required to use the device again.
Click to expand...
Click to collapse
I've tried the fastboot -w but it comes up with an error about not having permission. Idk about the encryption being disabled or not. And I haven't been successful with TWRP even coming up. Maybe I'm missing something
jwoegerbauer said:
Try to connect phone in USB-MTP mode via a USB-C cable - requires phone supports USB-C.
Click to expand...
Click to collapse
Are you taking about changing it in the PC device manager properties? Bc I don't have access to change it on the device itself. I will try it though. I'll let u know what happens. Thanks for the idea!
Have found it that your Nokia 2.2 supports OTG.
Tlink00 said:
Yeah...that be great! I'm willing to try anything. But the usb debugging isn't enabled.
Click to expand...
Click to collapse
Doesn't matter because it uses fastboot and the way the tool works bypasses permission errors
areallydumbperson said:
Doesn't matter because it uses fastboot and the way the tool works bypasses permission errors
Click to expand...
Click to collapse
Ok thanks! I'll let u know if it works!
Tlink00 said:
Ok thanks! I'll let u know if it works!
Click to expand...
Click to collapse
did it work?
areallydumbperson said:
did it work?
Click to expand...
Click to collapse
I haven't had a chance to try it, yet. But I will really soon. I'm very eager to use it.
areallydumbperson said:
did it work?
Click to expand...
Click to collapse
It says request permission fail. I have phone in fastboot mode
Nvm I GOT IT!!! OMG u are a life savor. Thank you, thank you,thank you!!! I've been working on this for 2 months now. Thank u so much!!
Tlink00 said:
Nvm I GOT IT!!! OMG u are a life savor. Thank you, thank you,thank you!!! I've been working on this for 2 months now. Thank u so much!!
Click to expand...
Click to collapse
Haha np
Having the same issue here, my son locked his nokia with a passcode he can't remember. Unable to get it into recovery mode, stuck on "no command"
djekl said:
Having the same issue here, my son locked his nokia with a passcode he can't remember. Unable to get it into recovery mode, stuck on "no command"
Click to expand...
Click to collapse
should be able to get in by pressing power + volume up or power + volume down at that no command screen
Tried that, just got back from the local phone repair shop, and they were unable to factory reset it also, and get past the no command screen.