Hi! I'm searching for kernel that can reduce overheating problems on a phone, LG G4 & N5X already has such feature as undervolting, but no any kernels for Mi4c that has it.
Thanks for any answer, maybe tutorial how to do that or link on github.
No such thing yet for Mi4C, I'm afraid...I've searched for that too, and found nothing. Kernel was released in may 2016 for this phone and there are good stable roms, but no undervolting yet, just big cores disable/throttle management solutions.
Ok. Now I have that thing as display voltages via sysfs. It wasn't too hard to implement. But it only display that, no any changes if I trying change any values.
Also for geeks. Some screens with Geekbench when phone not throttling frequencies. It was hard (Environment temperature was 2°C, phone was on cooler).
Sorry can't upload screenshot (rules about 10 posts).
So power was 6W (I think 1W for 4xA53 (values from Anandtech), 0.5W for system and yeah 4.5W for only 2xA57). I don't undestand why so many.
Voltage table A53&A57
384mhz: 800 mV 460mhz: 865 mV 600mhz: 865 mV
672mhz: 885 mV 787mhz: 915 mV 864mhz: 945 mV
960mhz: 975 mV 1248mhz: 1070 mV 1440mhz: 1130 mV
384mhz: 890 mV 480mhz: 890 mV 633mhz: 890 mV
768mhz: 910 mV 864mhz: 920 mV 960mhz: 930 mV
1248mhz: 985 mV 1344mhz: 1005 mV 1440mhz: 1020 mV
1536mhz: 1040 mV 1632mhz: 1055 mV 1689mhz: 1070 mV
1824mhz: 1090 mV
I just closed down the cpu core to solve it
Ok, finally I compile that. Results are impressive. So A53 UV up to 0.97V, A57 up to 0.93V(at max frequencies). Geekbench and GFXbench phone pass. No any stutter. At lower voltages receive boot loop. Sorry if someone want to test, I don't have 10 posts yet to include external links. No more needed underclock CPU.
Also now I have another problem, in some games main overheating come from GPU(own power from GPU=4W). I searching how UV it, but w/o luck. If someone can help links or some other stuff.
weter11 said:
Ok, finally I compile that. Results are impressive. So A53 UV up to 0.97V, A57 up to 0.93V(at max frequencies). Geekbench and GFXbench phone pass. No any stutter. At lower voltages receive boot loop. Sorry if someone want to test, I don't have 10 posts yet to include external links. No more needed underclock CPU.
Also now I have another problem, in some games main overheating come from GPU(own power from GPU=4W). I searching how UV it, but w/o luck. If someone can help links or some other stuff.
Click to expand...
Click to collapse
Give me the link by pm and i will post it!!
Ok here is the link!
can you explain how to use this mod?,thanks!
https://mega.nz/#!UQFCCZ7D!j3q1vAeJiit5h0zkkHMMWWApkXKXN4u9TW_FRJBwpN4
So, I prefer install in 3 steps
1. Unzip image: /storage/emulated/0/uvv.img (home folder);
2. Reboot to TWRP - Intall - Install image - Select uvv.img - Install to boot.
3. Reboot.
Kernel support all modern features: F2FS, NTFS, EXFAT, different CPU, GPU, IO governors, LiveDisplay, KCAL.
Also minimum CPU frequency 302 MHz.
Frequency/voltage table can displayed by any kernel manager, that support this feature or manually /sys/devices/system/cpu/cpu0/cpufreq/UV_mv_table.
coroneta said:
Ok here is the link!
can you explain how to use this mod?,thanks!
https://mega.nz/#!UQFCCZ7D!j3q1vAeJiit5h0zkkHMMWWApkXKXN4u9TW_FRJBwpN4
Click to expand...
Click to collapse
I get only a .dtsi file from download, what am I supposed to do with it?
Sorry. This is the main file, that contain voltages, if someone want to know.
I'll send a new PM with kernel.
Here is the link with kernel
https://mega.nz/#!4csihbDZ!eUrWnOaYPtmgxor8TAMyLlnsAFJ8GiXKTtV-C9zSUak
coroneta said:
Here is the link with kernel
https://mega.nz/#!4csihbDZ!eUrWnOaYPtmgxor8TAMyLlnsAFJ8GiXKTtV-C9zSUak
Click to expand...
Click to collapse
Used this on miui and got bootloop
tried with CM13.1 by TS and didn't get past MI bootlogo. flashed via flashify
weter11 said:
Sorry. This is the main file, that contain voltages, if someone want to know.
I'll send a new PM with kernel.
Click to expand...
Click to collapse
For what roms does it work?
Its compatible with latest CM14.1. About other systems don't know. That needed another kernels as I can see now.
CM14.1 wokrs really good. Its have only one bug: it isn't themes manager at this moment, but interface much smoother than it was in 13.1. All features, that work in 13.1 also work in 14.1.
About Miui, don't know is it possible using custom kernels on Miui.
weter11 said:
Its compatible with latest CM14.1.
Click to expand...
Click to collapse
a request if I may ask: could you possibly compile a kernel for cm13? I'd like to try it, but as long as xposed is no-go for nougat, I won't switch to CM14 (national roaming is a must for me)
Ok. I understand. I'll try to compile it. Link to kernel for your CM 13.1 on github please or CM13.1 compatible with your ROM kernel.
weter11 said:
Ok. I understand. I'll try to compile it. Link to kernel for your CM 13.1 on github please or CM13.1 compatible with your ROM kernel.
Click to expand...
Click to collapse
https://github.com/kumajaya/android_kernel_xiaomi_msm8992
If you don't have time I can do it too, I already compiled this kernel.
Cozzmy13, of cource. File, that is needed to upgrade is on page 1. But if you want see voltages, there another two files to change. If interesting, tomorrow I'll write that.
Related
Kernel 2.6.29 (OC + UV patched)
8 MB Ram Hack
CFQ Scheduler
Pershoot's audiomod (loudness).
EXT4
tunnel module (automaticaly loaded on boot)
cifs + nfs module
Apply with recovery console.
There are 2 versions . (MCR and CM, If you have a Stock rom use the MCR version)
uvoc_v14 and oc_v14:
patched with UV-OC values up to 1267MHz.
8 Mb Ram Hack
CFQ scheduler
Audio-mod and some minor config changes.
setcpu.txt in package.
You need setcpu + the setcpu.txt for the OC kernels (copy it to the root of your sdcard) and choose "Custom Frequencies" in setcpu.
Please don't use setcpu's active widget (battery drain)
Dropped the auto-detection because of a contrast bug.
If you need other modules let me know.
Credits go to:
coolbho3000 for providing the oc-uv patches.
Version history:
V14 (oc and uvoc version):
compiler optimizations (-mcpu=cortex-a8 -march=armv7-a -mtune=cortex-a8 -mfpu=vfpv3 -O3 -Os)
Special Overclock only version
Audio-mod values lowered (some people reported echo)
uvoc_V13:
8 MB Ram Hack (thanks to coolbho3000)
uvoc_v12:
Pershoot's audio-mod values added
There is now an Overclock only update available (apply after one of the uvoc_v12 versions)
uvoc_V11:
Reverted to V7 config with just CFQ added.
No setcpu install means stock 245-998 Mhz (undervolted by 50 mV on all frequencies)
Only max-frequency 1267 MHz is running at stock 1300mV. (1113 MHz at 1275mV)
Special CM version available.
uvoc_V10:
changed CPU_FREQ_ONDEMAND_MIN to 245000.
Some minor tweaks.
uvoc_V9:
Change to voltages.
if you don't use setcpu stock frequency = 998MHz
CPU_FREQ_ONDEMAND_MIN = 128800
uvoc_V8:
CFQ standard scheduler
Included setcpu.txt with max 1113 MHz (if you want more edit setcpu.txt)
Some other kernel optimalisations based on Paul and Teknologist config.
uvoc_V7 :
switched the kernel modules tun.ko and cifs.ko because of a bug.
uvoc_V1-V6:
Lots of testing going on.
how to flash it? apply zip file from sd card in recovery, right?
Thanks! it boots..
fstluxe said:
This Kernel Doesn't Boot!
Click to expand...
Click to collapse
Tested on MCR (3) and using it with apps2sd + dalvik-cache on ext4
fstluxe said:
This Kernel Doesn't Boot!
Click to expand...
Click to collapse
booted for me
fstluxe said:
This Kernel Doesn't Boot!
Click to expand...
Click to collapse
What rom is on your device? I'm very sure the kernel can't be the problem. Just a different ramdisk maybe. I can make one specific for your rom.
Nice Kernel
Any chance to put in oc and uv?
richardtrip said:
What rom is on your device? I'm very sure the kernel can't be the problem. Just a different ramdisk maybe. I can make one specific for your rom.
Click to expand...
Click to collapse
The stock 1.5xx rom
sorry if this is a "noob" question but what exactly does this do?
fstluxe said:
The stock 1.5xx rom
Click to expand...
Click to collapse
Try attached zip. No automatic tun module loading (the stock boot ramdisk doesn't start init scripts).
bananapie said:
sorry if this is a "noob" question but what exactly does this do?
Click to expand...
Click to collapse
The update replaces the stock kernel and put some extra modules in /system/lib/modules. The compiled kernel does include some extra options (ext4,tun,cifs and a different scheduler named "The Brain F*ck Scheduler")
DocRambone said:
Nice Kernel
Any chance to put in oc and uv?
Click to expand...
Click to collapse
Yes, tested already, but i can't see the max above stock 998MHz in setcpu, so don't know if it's working. Used the same patch as coolbho3000 (http://forum.xda-developers.com/showthread.php?t=681733).
hmm are there Anny possibility's to use this with the stock rom because the stock rom is for me the most stable..
Edit : sorry i see a second file for the stock
richardtrip said:
Yes, tested already, but i can't see the max above stock 998MHz in setcpu, so don't know if it's working. Used the same patch as coolbho3000 (http://forum.xda-developers.com/showthread.php?t=681733).
Click to expand...
Click to collapse
Maybe we can use UV without OC for starters?
Hi i see you have test a own compiled version of your kernel with the acpulock patch of coolbho3000 .Can you maybe upload that Binary ? for us to test.
isn't it helping if you try to use the setcpu.txt and add there the OC LINES LIKE 1036800,1075200,1113600
richardtrip said:
Yes, tested already, but i can't see the max above stock 998MHz in setcpu, so don't know if it's working. Used the same patch as coolbho3000 (http://forum.xda-developers.com/showthread.php?t=681733).
Click to expand...
Click to collapse
Can you put up the CM version again?
fstluxe said:
Hi i see you have test a own compiled version of your kernel with the acpulock patch of coolbho3000 .Can you maybe upload that Binary ? for us to test.
isn't it helping if you try to use the setcpu.txt and add there the OC LINES LIKE 1036800,1075200,1113600
Click to expand...
Click to collapse
Tried that, but it didn't change anything (i can select higher, but it never goes above 998).
Hmm thats strange .. can this be caused by the bootloader
richardtrip said:
Tried that, but it didn't change anything (i can select higher, but it never goes above 998).
Click to expand...
Click to collapse
fstluxe said:
Hmm thats strange .. can this be caused by the bootloader
Click to expand...
Click to collapse
Check the first post (oc-uv is stable on my phone, but no better linpack-score's)
stingerpl said:
Maybe we can use UV without OC for starters?
Click to expand...
Click to collapse
ocuv version in first post.
Sorry for my English.
This is a kernel.
KERNEL BASED TO Korea .
I do not include the shift from the terminal using the command unless opperator rom includes it as standard. With this kernel works perfectly Bluetooth and wifi for ROM 21D.
Uploaded on OC to 1.3 and 1.2
GPU 400
Improvements and teaks several.
From time to test a first version, gradually add more options. Governors and modifications.
I can only thank SAMNO BEDWA And for explaining how to activate the baseband. What You Have 3 months with that. They are very large.
A THANK YOU FROM SAMNO and BEDWA. CREDITS FOR THEM
is very very fast at all.
Open gallery, internet navigation, and tight RAM.
Kernel oc 1.3
DROPBOX
http://dl.dropbox.com/u/32478891/BestiaGinger_V1.zip
MINUS
http://minus.com/m1FQ3CM3h#1o
This kernel comes with the clock speed to 1.2. I hope you work well.
Kernel oc 1.2 for 21D
http://dl.dropbox.com/u/32478891/BestiaGinger_V1_Oc_1.2.zip
GRACIAS
acura2201 said:
Sorry for my English.
This is a kernel.
Koreana for all based ROM 21A .
Click to expand...
Click to collapse
You mean 21D isn't it?
I do not include the shift from the terminal using the command unless opperator rom includes it as standard. With this kernel works perfectly Bluetooth and wifi.
Uploaded on OC to 1.3
GPU 400
Improvements and teaks several.
From time to test a first version, gradually add more options. Governors and modifications.
I can only thank SAMNO BEDWA And for explaining how to activate the baseband. What You Have 3 months with that. They are very large.
A THANK YOU FROM SAMNO and BEDWA. CREDITS FOR THEM
GRACIAS
Click to expand...
Click to collapse
Yes,for roms 21D.......kernel 2.6.35.7
Gunnme said:
You mean 21D isn't it?
Click to expand...
Click to collapse
If only for ROM based on last update. The 21D in Spain.
The reference you indicate is only the basis of KERNEL, a GLP korea.
But now that the base 21A.
Thanks Acura, works great wifi, bt, etc ....
Great job
Hi gets reboot when turn in Bluetooth
also laag: in games mc3
Mfg
Could you include in this thread the default flashable kernel in case the CPU can't handle such high frequencies?
kampfbestie said:
Hi gets reboot when turn in Bluetooth
also laag: in games mc3
Mfg
Click to expand...
Click to collapse
It seems that so often goes wrong at your end .. if you have the module opperator in your rom, you can do this to slow down.
Enter the terminal (in the market there are many)
# su
# Echo 1200000000> / proc / opperator
As long as you hold this value alone does not restart your phone .. tomorrow I'll upload another kernel with less speed.
omgomg said:
Could you include in this thread the default flashable kernel in case the CPU can't handle such high frequencies?
Click to expand...
Click to collapse
If you will try to clear up one morning with a oc to 1.2
acura2201 said:
It seems that so often goes wrong at your end .. if you have the module opperator in your rom, you can do this to slow down.
Enter the terminal (in the market there are many)
# su
# Echo 1200000000> / proc / opperator
As long as you hold this value alone does not restart your phone .. tomorrow I'll upload another kernel with less speed.
Click to expand...
Click to collapse
Now US Ing acurorom21d no Problem with 1.3 only when turn on Bluetooth restart
With thiaiz 2.6.1 i had 1.4 with Nov Problems
Theoretically the problem is the CPU.
If I can now at night I'll upload another kernel lower.
It is up to the first post the kernel to 1.2 to see if it suits you best.
lucky friend
acura2201 said:
Theoretically the problem is the CPU.
If I can now at night I'll upload another kernel lower.
Click to expand...
Click to collapse
Yes. Not all CPU can handle high OC. Tried many roms, but mine can run max at 1.15GHz.
Would be nice if there are lower OC versions (1.1Ghz). Thanks!
nice job thanks. v21 acura rom kernel 1.3 very very fast internet
Installed and working on V21D @ 1.3Ghz. Great stuff m8. thanks
---------- Post added at 08:55 AM ---------- Previous post was at 08:51 AM ----------
acura2201 said:
It seems that so often goes wrong at your end .. if you have the module opperator in your rom, you can do this to slow down.
Enter the terminal (in the market there are many)
# su
# Echo 1200000000> / proc / opperator
As long as you hold this value alone does not restart your phone .. tomorrow I'll upload another kernel with less speed.
Click to expand...
Click to collapse
Have a question, i use script manager with a script as root in systems folder and use the above command but doesnt change the clock. I want to try 1350 or higher.
hello
could you test M3D Benchmark v1.15 PowerVR (http://forum.xda-developers.com/showthread.php?t=1370745&page=16) i want to understand how much GPU OC will affect on performance.
excuse me if my post doesn't relate here.
please feedback in http://forum.xda-developers.com/showthread.php?t=1370745&page=23
thank you
Amazing kernel. Works perfectly with the acura 21d rom.
Would it be possible to run a script to disable the key backlights on boot? They're pointless since most people have already memorised the layouts of the keys, they're annoyingly bright at night and also only appear when pressed. (No point knowing you pressed the wrong key after pressing it)
This can be done through running the script
echo 0 > /sys/class/leds/keyboard-backlight/brightness
chmod 444 /sys/class/leds/keyboard-backlight/brightness
Click to expand...
Click to collapse
it basically sets the brightness file to a value of 0
Could you make this work with 21d and the 3d ics theme in the theme and app section because i can install the new kernel fine but when i add the ics 1.2 theme it goes full prossessor 100% and i really like this theme and want to use it and the kernel. Thanks
Hi, ive tested the 1.3oc version, works really good, and could reach up to 3.800 at quadrant. But the sad thing is that Wifi not working at all with Thiaiz 2.6.1 Prada.sadsad :/
Actually this one was the fastest kernel what ive met, so after the fixes i would use it
Thanks for your hard work
Draegloth said:
Hi, ive tested the 1.3oc version, works really good, and could reach up to 3.800 at quadrant. But the sad thing is that Wifi not working at all with Thiaiz 2.6.1 Prada.sadsad :/
Actually this one was the fastest kernel what ive met, so after the fixes i would use it
Thanks for your hard work
Click to expand...
Click to collapse
Friend ginger versions based on LA21 A.. Thiaiz and go with the kernel prada 21A have it in the first post. This way you will work the bluetooth and wifi. No problem but give kernel version of the rom you're carrying.
from README file :
CpuFreq Patch for Samsung Galaxy Y (S5360)
==========================================
what this patch do
------------------
1. add additional freq to cpufreq 624mhz, make it have 3 freq scaling
(312,624,832 mhz)
2. fix bug while reading
"/sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies"
that bug make cpu spy not working.
Apply patch
-----------
1. copy all patch files outside kernel source dir. dir should be like this
kernel/common/
kernel/modules/
bcm_cpufreq.c.patch
clock-21553.c.patch
device.c.patch
2. goto kernel/common
$cd kernel/common
3. apply patch
$patch -p2 < ../../bcm_cpufreq.c.patch
$patch -p2 < ../../clock-21553.c.patch
$patch -p2 < ../../device.c.patch
4. build kernel
Note
----
this patch work using clock mode betwen 0xC (312mhz) and 0xF (832mhz) in
file "clock-21553.c". 0xD and 0xE working on same frequency 624mhz. don't
know yet whitch one to use (i use 0xE), so please contact me if you have
more information. right now this patch only effectife if you using
performance (or powersave) with app to control it (like setcpu). not
limitation of patch, but bcm21553 governor look like
ignore scaling_{min|max}_freq.
if you capable, please review my patch. scaling_available_frequencies
related is pretty safe. if you only interested to that part, get it from
file "bcm_cpufreq.c.patch" which call "cpufreq_frequency_table_get_attr"
and "cpufreq_frequency_table_put_attr". the other i am not sure yet. i am
still test it about 2-3 days.
i am not experiance creating patch file, so check file before apply and
tell me if i do it wrong. but patch is so small, apply it manually not
going to hurt you
i include test build (boot-sgy.tar). flash it with odin (pda) if you want
to try. it close to stock kernel only with patch and powersave governor
enable. and like usual, i am not responsible if some thing bad (or good)
happen to you device.
Click to expand...
Click to collapse
additional note :
- this patch for samsung's GT-S5360_GB_Opensource_Update2.zip kernel source
- this thread is about patch, not custom kernel. i include kernel test build only to make easy if someone need test it. so please don't request features like a2sd, cwm,etc.
- this patch is alpha quality. i already testing (>2 days) before submit here. but some of patch work on low level system and maybe effect on long term usage. until it fully tested, use only for testing purpose and remove from your device when done.
- i make small mistake in "apply kernel" part on README file inside archive. i already corrected the one in this thread. sorry.
Link
http://www.mediafire.com/download.php?08gwuw8et04bg4r
pretty decent
wow. excellent patch.
for tapatalk users it may come in handy to have the kernel available as attachment to run KernelUpdate on.
don't miss out on CPU-spy app.
mai77 said:
wow. excellent patch.
for tapatalk users it may come in handy to have the kernel available as attachment to run KernelUpdate on.
don't miss out on CPU-spy app.
Click to expand...
Click to collapse
Is it being patched.
What if it is uc,oc ,how will it have 642
premolikeshtc said:
Is it being patched.
What if it is uc,oc ,how will it have 642
Click to expand...
Click to collapse
yes, the boot.img is a ready-made patched image.
try it out with cpu spy.
then try cpu tuner , no-frills cpu app and so forth.
report back if poss.
What Iam saying, if the kernel is Oc to 1Ghz, and uc to 200 Mhz.Do I have to modify for every kernel, And do we open boot.img and put it there.
no. instead of patching a binary, we patch the kernel source code.
with this kernel we should be able to find out, whether clockspeed changes are working.
for that purpose, some PROPER and accurate benchmarking may be performed.
premolikeshtc said:
What Iam saying, if the kernel is Oc to 1Ghz, and uc to 200 Mhz.Do I have to modify for every kernel, And do we open boot.img and put it there.
Click to expand...
Click to collapse
you need apply patch to kernel source and rebuild. that source patch, not binary patch. but you can't make sgy work on 200Mhz or 1Ghz. 312,624,832 is not random number, it's multiple of 26mhz (or 13mhz) which is base frequency of sgy.
so maybe it is not 200.000 MHz precisely, but a multiple of a base frequency
clock frequency can be changed at intervals only
---------- Post added at 05:39 AM ---------- Previous post was at 05:37 AM ----------
cpu tuner seems to be at ease with this kernel, btw
---------- Post added at 05:49 AM ---------- Previous post was at 05:39 AM ----------
"benchmark & tuning trial" app also displays the percentage of total time spent at a given f, like cpu spy
link backed up
thanks i will try this .
i'll try this later..
i hope this thread will not be deleted.. this is a great help for our device
one down
sasan258 said:
i'll try this later..
I hope this thread will not be deleted.. this is a great help for our device
Click to expand...
Click to collapse
well, I take it, the head honcho of this place kinda took PG101 off the roster.
probably not the worst decision, after all ...
i see.. then maybe were on our way to a great development then
indeed. that decision was a great stride forward.
mai77 said:
wow. excellent patch.
for tapatalk users it may come in handy to have the kernel available as attachment to run KernelUpdate on.
don't miss out on CPU-spy app.
Click to expand...
Click to collapse
@whitexp : just a favor ,buddy can you run linpack test and see if the freq 624 works?
i will try it later today, but am still doin some stuff, looking for reference books.
at some point we might also look at this "cpu spy" app. it is open source. maybe we should rack our brains whether that app can be improved on in some way.
post edited
So all we have to do is flash boot.img via SGYbiCWM,
BTW the boot.img is a stock kernel of what? Based on what firmware? (what i mean for example is that is it a stock kernel of DDLA1?)
it's in the post#1. very close to stock kernel of that samsung update file.
focus is on setting clockspeed.
which stock rom version used that particular version of published source code, I don't know. build timestamp may tell.
Disclaimer:
I'm not responsible for any damage of your device that may occur.
Prerequisites:
It's tested with tezet's builds and should also work with stock kernel. If not, please notify me and I will upload other versions.
For czechop's builds I added special files because the build uses a different kernel than tezet's. You do not break something if you install the wrong version, it just won't work.
You need CWM or TWRP of course...
Difference between the zip-files:
...active.zip: ...activates the governor on every boot.
...inactive.zip: ...installs the governor but you must choose it in settings.
You can (de-)activate the governor on boot by installing the corresponding version.
Information for users:
Boot to CWM/TWRP and flash the zip, that's it.
Information for devs:
You can pass parameter to the module. Read 99boostedASS. The values are sorted alphabetically:
Code:
awake_ideal_freq
down_rate_us
max_cpu_load
min_cpu_load
ramp_down_step
ramp_up_step
sample_rate_jiffies
sleep_ideal_freq
sleep_wakeup_freq
up_rate_us
If you want to change values, change them in 99boostedASS. If you want to use standard values of boostedASSv2 just leave the parameters away oder change the ones you want to be standard to negative values.
Credits:
Thanks to BMc08GT for source code of boostedASSv2
Thanks to ->--- for optimized values for the MS2
Thanks.. works fine..
Milestone_User / MS_User
Sent from my A953 using xda app-developers app
I had the Data-problem really heavy, so i will test, if this is the solution. Installed it a few minutes ago. will report in a few days my experience.
MS_User said:
Thanks.. works fine..
Milestone_User / MS_User
Sent from my A953 using xda app-developers app
Click to expand...
Click to collapse
Nice to see you!
carpet55 said:
I had the Data-problem really heavy, so i will test, if this is the solution. Installed it a few minutes ago. will report in a few days my experience.
Click to expand...
Click to collapse
If this governor really fixes problems with data connections with other governors, that would be great! Looking forward to hearing some positive reactions.
carpet55 said:
I had the Data-problem really heavy, so i will test, if this is the solution. Installed it a few minutes ago. will report in a few days my experience.
Click to expand...
Click to collapse
Me too..
SmartassV2
Any chance you do the same for SmartassV2? Would really appreciate it
Thanks for your work..
Which differences are about these ones? http://forum.xda-developers.com/showthread.php?t=1655480
Sorry for my English
JoseBerga said:
Thanks for your work..
Which differences are about these ones? http://forum.xda-developers.com/showthread.php?t=1655480
Sorry for my English
Click to expand...
Click to collapse
These don't work anymore due to 2nd-boot. You'll get bootloops, at least that is what I get and others.
Does it works on Danik's Ms2ginger version?
Thats my favorite rom.
Enviado de meu A953 usando o Tapatalk 2
Now i used it one day, and i never had data problems! Before this app my internet was not usable...
So, this app solved my connections problems! Thanks for Woody and the developers!
Alchedin said:
Any chance you do the same for SmartassV2? Would really appreciate it
Click to expand...
Click to collapse
boostedASSv2 is a modified smartASSv2 so I think it is not worth investigating in smartASSv2. If you can name good arguments for smartASSv2 I might look at it.
morcego.surf said:
Does it works on Danik's Ms2ginger version?
Thats my favorite rom.
Enviado de meu A953 usando o Tapatalk 2
Click to expand...
Click to collapse
Open "Settings/Phone Info". If it shows that you are using kernel 2.6.32.9 it should work. I would recommend an backup though. If it does not work please tell me which kernel you are using and I will upload a version for you.
carpet55 said:
Now i used it one day, and i never had data problems! Before this app my internet was not usable...
So, this app solved my connections problems! Thanks for Woody and the developers!
Click to expand...
Click to collapse
Great to hear! Besides, it is not an app, it is a governor...
blu2lz said:
boostedASSv2 is a modified smartASSv2 so I think it is not worth investigating in smartASSv2. If you can name good arguments for smartASSv2 I might look at it.
Click to expand...
Click to collapse
Well since you modified the BoostedAssV2 i was hoping you could tell me :silly:
But I searched about the differences between them and it seems you are right, there aren't any major differences between BoostedAss and SmartAss. Even seems boostedassv2 is more power efficient.
I used these links as reference:
link
and
link
@carpet55
You're welcome!
Here another note using boostedASSv2.
In the last days i got some randomly/variouse FCs without any clue what happens. Now i think i found it.
Before boostedASSv2 and the first days with, i used an "easy" lifewallpaper and sometimes, when the M2 wakes up from deepsleep it behaves strange.
After changing to a static wallpaper this is gone .
_WOODY_
Hi! i´m tryng to include the boostedASSv2 in a zip, a tezet´s cm10 nightly, but i´m a little lost. I´ve downloaded the zip file (the "active" one) finding 3 files inside. using the notepad++ found in the 99boostedASS that i should place the files symsearch.ko in /system/lib/modules/ and so the file cpufreq_boostedASS2.ko but there are some values at the end of the line that i dont´t know where and how they should be placed (i think in the cpufreq file , but...) And finaly, the last line, what does it means? Hope anybody can help me, and sorry for my english!
Thank for your work.
Dying to squeeze some more from the M2...
ramelco said:
Hi! i´m tryng to include the boostedASSv2 in a zip, a tezet´s cm10 nightly, but i´m a little lost. I´ve downloaded the zip file (the "active" one) finding 3 files inside. using the notepad++ found in the 99boostedASS that i should place the files symsearch.ko in /system/lib/modules/ and so the file cpufreq_boostedASS2.ko but there are some values at the end of the line that i dont´t know where and how they should be placed (i think in the cpufreq file , but...) And finaly, the last line, what does it means? Hope anybody can help me, and sorry for my english!
Click to expand...
Click to collapse
Read the information for devs in my first post. I explained the values there.
99boostedASS must be moved to /system/etc/init.d/.
Read the updater-script for further information on where to put files.
Now also available for czechop builds!
I just added files for czechop's builds. He uses a different kernel, so the old files are not working. It is tested with the most recent build of CM11, notify me if there are any problems.
Can't we use that governor on other devices?
It's not the first time I overclock one of my phones, but I'm stuck here. I'm on CM11 by czechop and flashed boostedASSv2_for_MS2_czechop_active.zip. Installed SetCPU, but can't choose more than 1000 MHz. I installed Aero Control, at least it shows I have boostedASSv2 installed. But can't change the MHz. Also tried Milestone Overclock, works temporarily (I know it says only for Stock ROM) and can see that change in the CM11 developer settings, but after a reboot, all is gone.
I went to the boot menu where I can change CLK 1 to 4. Changed 4 from 1000 to 1300 MHz but phone gets stuck during boot.
I know I'm doing something wrong . How can I get the boostedASS to work / run the phone with 1300 MHz (or less)? Thanks in advance.
i use Kernel auditor for CPU modifications ...is there any such way for GPU ??
May be cyclox kernel in ROM thread can help if you have not tried. However, i think we can only set to higher values for CPU if kernel supports but GPU can only be set to lower values or the max set but not overclocked.
shashank1320 said:
May be cyclox kernel in ROM thread can help if you have not tried. However, i think we can only set to higher values for CPU if kernel supports but GPU can only be set to lower values or the max set but not overclocked.
Click to expand...
Click to collapse
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response
shashank1320 said:
May be cyclox kernel in ROM thread can help if you have not tried. However, i think we can only set to higher values for CPU if kernel supports but GPU can only be set to lower values or the max set but not overclocked.
Click to expand...
Click to collapse
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response
sreekantt said:
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response
Click to expand...
Click to collapse
Hope he respond on that. Anyway GPU is fine for this phone and OC may or may not impact battery as well
Any luck?
BELIEVER PK said:
Any luck?
Click to expand...
Click to collapse
not yet bro
sreekantt said:
Yeah... I meant d max set.... Kernel auditor made my phone smooth but still animations r stuttering.... I asked d same thing in cyclox kernel thread.... Waiting for dev response
Click to expand...
Click to collapse
Can u suggest me what values to give in the max frequency and min frequency. Nd also stock frequency is 2.1 GHz, which doesn't seem to increase. How to increase that frequency from 2.1 to something higher. Thanks in advance.
Rishav Nath Pati said:
Can u suggest me what values to give in the max frequency and min frequency. Nd also stock frequency is 2.1 GHz, which doesn't seem to increase. How to increase that frequency from 2.1 to something higher. Thanks in advance.
Click to expand...
Click to collapse
If u really want max performance at the expense of battery
Just set CPU governor to perfomance mode....it will be in interactive mode by default....change all the 8 cores to perfomance- no need to play with frequency values.
But this isn't needed at all after latest cyclox kernel update
Here is the process i followed which made my phone buttery smooth maintaining the battery life
1. Flash latest Cyclox kernel (download from attachment or the thread if u can find it)
New GPU governor would be automatically activated which makes the animations smooth
2. i wasn't still satisfied with performance as it was lagging after a day or two if we don't reboot. If u r satisfied- No need to follow next step.
3. Root with Magisk - Flash run time optimization(ART optimization) module in recovery
Clear Cache & Dalvik Cache- Reboot
this worked like magic on my device
4. If u face any issues with ART optimization module...i have attached uninstaller too, if u have any connectivity or crashing issues which is unlikely as we r on same device - just in case - have attached crashfix.zip file(only use if u have problem with main moule)
Kernel & Module thread links - Download appropriate kernel file from thread if u r not on stock
https://forum.xda-developers.com/honor-6x/development/kernel-cyclox-kernel-honor-6x-t3676919
ART optimization thread link- they're few more advanced settings mentioned in this thread if u want to play with it - Default setting which is set to 'Speed' was sufficient for me.
https://forum.xda-developers.com/apps/magisk/module-android-runtime-optimization-t3596559
Thanx to developers for their wonderful work
sreekantt said:
If u really want max performance at the expense of battery
Just set CPU governor to perfomance mode....it will be in interactive mode by default....change all the 8 cores to perfomance- no need to play with frequency values.
But this isn't needed at all after latest cyclox kernel update
Here is the process i followed which made my phone buttery smooth maintaining the battery life
1. Flash latest Cyclox kernel (download from attachment or the thread if u can find it)
New GPU governor would be automatically activated which makes the animations smooth
2. i wasn't still satisfied with performance as it was lagging after a day or two if we don't reboot. If u r satisfied- No need to follow next step.
3. Root with Magisk - Flash run time optimization(ART optimization) module in recovery
Clear Cache & Dalvik Cache- Reboot
this worked like magic on my device
4. If u face any issues with ART optimization module...i have attached uninstaller too, if u have any connectivity or crashing issues which is unlikely as we r on same device - just in case - have attached crashfix.zip file(only use if u have problem with main moule)
Kernel & Module thread links - Download appropriate kernel file from thread if u r not on stock
https://forum.xda-developers.com/honor-6x/development/kernel-cyclox-kernel-honor-6x-t3676919
ART optimization thread link- they're few more advanced settings mentioned in this thread if u want to play with it - Default setting which is set to 'Speed' was sufficient for me.
https://forum.xda-developers.com/apps/magisk/module-android-runtime-optimization-t3596559
Thanx to developers for their wonderful work
Click to expand...
Click to collapse
Thanks a lot for helping me out. I've just rooted my Honor 6x. So was exited about it and trying out new things. I successfully flashed the Dolby Atmos and its working fine.