[Completed] cant load offical roms - XDA Assist

Hi,
anyone know why my rom install via odin keeps failing?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1205)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> sbl1.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> sdi.mbn
<ID:0/010> NON-HLOS.bin
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> modem.bin
<ID:0/010> cache.img.ext4
<ID:0/010> hidden.img.ext4
<ID:0/010> FAIL! (Size)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1

XDA Visitor said:
Hi,
anyone know why my rom install via odin keeps failing?
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Added!!
<ID:0/010> Odin engine v(ID:3.1205)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> aboot.mbn
<ID:0/010> sbl1.mbn
<ID:0/010> rpm.mbn
<ID:0/010> tz.mbn
<ID:0/010> sdi.mbn
<ID:0/010> NON-HLOS.bin
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> system.img.ext4
<ID:0/010> modem.bin
<ID:0/010> cache.img.ext4
<ID:0/010> hidden.img.ext4
<ID:0/010> FAIL! (Size)
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1
Click to expand...
Click to collapse
Greetings!
Thank you for using XDA Assist.
First, please create an XDA account so you can post in our forums:
http://forum.xda-developers.com/register.php
After that, please respond to this thread with your exact device model so I can best assist you.

Related

[Q] Trying to Manually update to 5.0 SM-N9005; Odin - Error: FAIL!(Ext4)

Hi,
I am having a lot of trouble flashing my Note 3 (SM-N9005) 16gb to Android 5.0. At this point in time, all I can do is enter into DL mode.
I have been trying to use Odin to flash my device, but I think I must have messed up the PIT file by accident - using a 32gb instead of a 16 gb. I now know that I should never have touched the PIT button.
I am using this stock firmware: N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 to get back to old version.
Odin reads:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there someway to fix this?
Thanks in advance!
dmar16 said:
Hi,
I am having a lot of trouble flashing my Note 3 (SM-N9005) 16gb to Android 5.0. At this point in time, all I can do is enter into DL mode.
I have been trying to use Odin to flash my device, but I think I must have messed up the PIT file by accident - using a 32gb instead of a 16 gb. I now know that I should never have touched the PIT button.
I am using this stock firmware: N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 to get back to old version.
Odin reads:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Is there someway to fix this?
Thanks in advance!
Click to expand...
Click to collapse
Use the right pit file and you should be fine.
LS.xD said:
Use the right pit file and you should be fine.
Click to expand...
Click to collapse
Thanks. I tried that with this PIT file [HLTE_HKTW_OPEN_16G.pit], but get this message now:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
"ODIN : Invalid ext4 image"
Is there a better PIT file I should use?
Try restarting odin, use right pit file and it should flash the stock rom
Don't forget to hit thanks if I helped you...
dmar16 said:
Thanks. I tried that with this PIT file [HLTE_HKTW_OPEN_16G.pit], but get this message now:
<ID:0/005> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N9005XXUEND4_N9005FTMEND1_N9005XXUENC2_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/005> Odin v.3 engine (ID:5)..
<ID:0/005> File analysis..
<ID:0/005> SetupConnection..
<ID:0/005> Initialzation..
<ID:0/005> Set PIT file..
<ID:0/005> DO NOT TURN OFF TARGET!!
<ID:0/005> Get PIT for mapping..
<ID:0/005> Firmware update start..
<ID:0/005> SingleDownload.
<ID:0/005> aboot.mbn
<ID:0/005> NAND Write Start!!
<ID:0/005> sbl1.mbn
<ID:0/005> rpm.mbn
<ID:0/005> tz.mbn
<ID:0/005> sdi.mbn
<ID:0/005> NON-HLOS.bin
<ID:0/005> boot.img
<ID:0/005> recovery.img
<ID:0/005> system.img.ext4
<ID:0/005> FAIL! (Ext4)
<ID:0/005>
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
My phone says:
"ODIN : Invalid ext4 image"
Is there a better PIT file I should use?
Click to expand...
Click to collapse
You phone (or at least the stock firmware you want to use is "France - Orange") There has no official Lollipop update been released yet.
The pit file is "Hong Kong -Taiwan" , may be its not compatible to each other. Try to get a pit file that matches your firmware. Or take a firmware that matches the pit file. In any case you should backup your EFS before going on flashing different firmwares. Use TWRP to backup your EFS .
OK thanks. Downloading FW for Hong Kong - Taiwan now. I will let you know if it works.

Flashing troble,

when i try to flash my SM N915V and then i get this:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> aboot.mbn
<ID:0/004> NAND Write Start!!
<ID:0/004> sbl1.mbn
<ID:0/004> rpm.mbn
<ID:0/004> tz.mbn
<ID:0/004> sdi.mbn
<ID:0/004> NON-HLOS.bin
<ID:0/004> boot.img
<ID:0/004> recovery.img
<ID:0/004> system.img.ext4
<ID:0/004> FAIL! (Ext4)
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
At the Phone said like this:
IMG too big
How i can fix it?
Someone please help me
Are you flashing a custom rom or one from another region? Looks like your system img dies not match the data in your PIT file.
Flashing a stock rom should make it okay
Sent from my SM-N915G using Tapatalk

SM-G920F Odin flash error ( soft bricked)

I Tried multiple times to flash with odin but never with success, allays with the same error:
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1203)..
<ID:0/010> File analysis..
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> SingleDownload.
<ID:0/010> sboot.bin
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Help would be appreciated.

S7 edge SM-G935F blocked on TWRP

Hi guys help pls
I will be brief, my smartphone s7 SM-G935F he's stuck on TWRP... I wanted to install this firmware with ODIN
but impossible I have this message
<ID:0/010> Added!!
<ID:0/010> Removed!!
<ID:0/010> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/010> Odin engine v(ID:3.1301)..
<ID:0/010> File analysis..
<ID:0/010> Total Binary size: 3914 M
<ID:0/010> SetupConnection..
<ID:0/010> Initialzation..
<ID:0/010> Get PIT for mapping..
<ID:0/010> Firmware update start..
<ID:0/010> NAND Write Start!!
<ID:0/010> SingleDownload.
<ID:0/010> boot.img
<ID:0/010> recovery.img
<ID:0/010> FAIL!
<ID:0/010>
<ID:0/010> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
help pls guys
TY

I have a question about Odin, please help.

I am using the North American version of the Galaxy tablet s7 wifi (sm-T870).
Because I live in Korea I downloaded the Korean firmware and flashed it with Odin. In Odin it says PASS, but the software provider is still XAR/XAR.
Other S6 LITE OR GALAXY A7 2020 silver
Flashing Korean firmware with Odin
The software completely turns into KOO/KOO
All three are Android 10. Why does this difference appear?
If you know well about Flash or Odin, please help. Thank you
<ID:0/008> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/008> Odin engine v(ID:3.1301)..
<ID:0/008> File analysis..
<ID:0/008> skip file list for home binary
<ID:0/008> quest.fv
<ID:0/008> testvector.fv
<ID:0/008> spunvm.bin
<ID:0/008> persist.img
<ID:0/008> userdata.img
<ID:0/008> metadata.img
<ID:0/008> dqmdbg.img
<ID:0/008> misc.bin
<ID:0/008> Home Binary Download
<ID:0/008> Total Binary size: 8748 M
<ID:0/008> SetupConnection..
<ID:0/008> Initialzation..
<ID:0/008> Get PIT for mapping..
<ID:0/008> Firmware update start..
<ID:0/008> NAND Write Start!!
<ID:0/008> SingleDownload.
<ID:0/008> abl.elf
<ID:0/008> xbl.elf
<ID:0/008> xbl_config.elf
<ID:0/008> tz.mbn
<ID:0/008> hyp.mbn
<ID:0/008> devcfg.mbn
<ID:0/008> aop.mbn
<ID:0/008> cmnlib.mbn
<ID:0/008> cmnlib64.mbn
<ID:0/008> qupv3fw.elf
<ID:0/008> NON-HLOS.bin
<ID:0/008> dspso.bin
<ID:0/008> km4.mbn
<ID:0/008> storsec.mbn
<ID:0/008> sec.elf
<ID:0/008> bksecapp.mbn
<ID:0/008> tz_iccc.mbn
<ID:0/008> tz_hdm.mbn
<ID:0/008> apdp.mbn
<ID:0/008> msadp.mbn
<ID:0/008> uefi_sec.mbn
<ID:0/008> multi_image.mbn
<ID:0/008> vbmeta.img
<ID:0/008> vaultkeeper.mbn
<ID:0/008> boot.img
<ID:0/008> recovery.img
<ID:0/008> super.img
<ID:0/008> dtbo.img
<ID:0/008> vbmeta.img
<ID:0/008> vbmeta_samsung.img
<ID:0/008> cache.img
<ID:0/008> prism.img
<ID:0/008> optics.img
<ID:0/008> RQT_CLOSE !!
<ID:0/008> RES OK !!
<ID:0/008> Removed!!
<ID:0/008> Remain Port .... 0
<OSM> All threads completed. (succeed 1 / failed 0)
<ID:0/007> Added!!
<ID:0/007> Removed!!
<ID:0/007> Added!!
<ID:0/007> Removed!!

Categories

Resources