When you buy a new phone for your child. You want it must be a cool phone, but you also don't want your child uses WiFi function.
I have seen many people wondering here and there to Disable the WiFi permanently in their device. So i thought to make a thread regarding this.
I have seen many posts asking to remove or rename the WiFi Modules to Disable the WiFi but when i tried that unfortunately it failed to delete the Module.
So i moved on for another step and found easy steps to Disable WiFi permanently
Tested & worked in HTC M8 (4.4.2) & Nexus 5 (5.1)
This is a simple trick played in Build.prop which can disable the WiFi of your device for ever.
All you need is :
Rooted Device
ES File Explorer
RB Text Editor
First of all i recommend you to make a system backup with TWRP
here we go :
1. Open ES File Explorer and get Root access
2. Go to system folder and open Build.prop using RB Text Editor (i recommend you to backup original file)
3. Remove the below mentioned lines in Build.prop
Code:
[COLOR="red"]wifi.interface=
wifi.supplicant_scan_interval=[/COLOR]
4. save it and reboot!!
You can notice that WiFi buttons are no longer in use
Warning!
Im not responsible for any damage caused. Always Make Backup
Disclaimers:
PM me before you post!​
#Reserved
Does this cause problems with broadcasting a Hotspot?
olearius said:
Does this cause problems with broadcasting a Hotspot?
Click to expand...
Click to collapse
No i guess
did not test that yet
please before i install new version of cm 12 how i can edit wifi to not turn on auto
Is there any Way to Disable Mobile Network Internet also ? Like 2G Edge , 3G ,4G etc.,
There is manual option to Disable Data Usage.
Is there any permanent Solution ?
Yes you can disable data permanently....
ashu55 said:
Is there any Way to Disable Mobile Network Internet also ? Like 2G Edge , 3G ,4G etc.,
There is manual option to Disable Data Usage.
Is there any permanent Solution ?
Click to expand...
Click to collapse
From my experience you have three options: 1. go into settings and disable your data that way, 2. download an app that allows for easy data on/off switching or 3. which I'm going to do myself when I buy a new (used ebay) phone in the next couple weeks for someone: contact my prepaid carrier and ask them to "disable the data". They can do this at the carrier-level. This will prevent a child for example from re-enabling the data just by clicking a button on their phone. I just verified with my carrier today that they can in fact do this. Good luck!
Hello .. sir ... I had seen that file in that text editor .. i dont found that coding... Nw what i can do.. pls tell me...
[email protected]
This did not work for my phone, as those program lines are not present in my build.prop folder, but I found a solution for my Samsung Galaxy S5 Neo (6.0.1) that I know many others are looking for, it will probably work for all the galaxy models or at least some of them. Here it is:
1. Root your phone using "oneclickroot.com", they will do everything for you, including installing TWRP and SuperSU. Be sure to pay attention to how to access TWRP (Team Win Recovery Project)... for me it was by holding down the volume up, home, and power keys simultaneously and then releasing the power key on seeing red letters. It might vary phone to phone.
2. Make a system backup with TWRP after rooting by accessing TWRP and simply clicking "backup" and then swipe. In the event that you need to restore just access TWRP and click and swipe "restore".
3. Use a file managing app like "Root Browser" by JRummy from google play to go into these file folders: "system/etc/wifi"
4. In the Wifi folder delete the first four files:
bcmdhd_apsta.bin
bcmdhd_ibss.bin
bcmd_mfg.bin
bcmd_sta.bin
4. Now reboot your phone by simply turning it off and back on again.
5. All done, your phone's wifi will no longer work.
6. If for whatever reason you don't want to be able to get it back ever again, just go delete your system backup in TWRP and you won't be able to get it back.
If you don't see these files in your phone after rooting, don't be discouraged. I figured it out with a little experimentation and I knew absolutely nothing about programming or androids... I still don't. Just make a system backup with TWRP and experiment by deleting different files that have "Wifi" in their name. Only delete one at a time or a small group of files at a time, and restart the phone every time as programming changes will not take effect until you do. Every time you brick (disable) the phone, just use TWRP to restore your OS (Operating System) using your TWRP backup. It only takes about 2 minutes to restore every time. I bricked my phone about 4 times in the process of figuring this out. Very simple and easy.
Also, your carrier will usually be willing to apply a "data block" to your account if you call them. For $2/month Koodo will apply a data block that makes it impossible to access data.
Hello,
I couldn't find neither the file "Build.prop"
neither these files.
I have an intel tab with android 5.0
me too
I have android 6.. didn't find any of them...
Jasmin74 said:
Hello,
I couldn't find neither the file "Build.prop"
neither these files.
I have an intel tab with android 5.0
Click to expand...
Click to collapse
And to enable it whats the number Code ?? I have lenovo Vibek4 note , my wifi configured interface is Disable, Please help
If I did this to disable wi-fi on my child's phone, could they simply undo it by doing a factory reset of the phone?
Disable Wifi on Moto G6 / Pie
I recently had to do the same thing with my child's phone. She was just too good at circumventing the usual child protections and getting on the internet to surf adult material and chat with random stalkers halfway around the planet.
She has a Moto G6 with Android 9.0 PIE.
1. Rooted it
2. Loaded a file manager and after much trial and error found that wifi could be disabled with name changes on:
/vendor/lib/modules/wlan.ko -> wlan.bak
/vendor/lib/modules/pronto_wlan.ko -> pronto_wlan.back
Then, reboot the phone.
The user can attempt to start wifi, but it fails. No boot issues.
thedude06 said:
If I did this to disable wi-fi on my child's phone, could they simply undo it by doing a factory reset of the phone?
Click to expand...
Click to collapse
Yes, they could. That's why I also used Google Family Link to set up a minor child account for her and made it the main account for the phone after I changed the file names above, but before rebooting. GLF prevents a factor reset from within the phone or changing the user. She could try to boot into recovery and perform a factory flash, but then it's going to want the same google account as before....and she doesn't have the password. Fastboot is locked as well. The only issue you might have is that google somehow thinks all 14 yr-olds should be independent enough to remove supervision, but I guess you could do the same thing that the kids do to get around age limits - change the birth date.
I also shut off data at the wireless provider.
Now, she's got a smart phone that calls and texts, but can't get on the internet or play store. Also, without the internet, no updates that will wipe out these changes.
Does not work for me
Hi
I have a Samsung Galaxy Grand Prime with LineageOs, rooted. I didnt find the files you were speaking about.
Except build.prop, but the mentioned lines didnt even exist in my phone files. Is there any other way to disable wifi permanently ?
Thanks
Sorry for the bump, but I really need to disable wifi in a Android 10 LineageOS based rom, but none of this solutions works...
How can I do this?
How to find Driver Files to disable the Wifi
There were a couple of bumps on this thread regarding driver files for wifi and how people weren't able to find these files on their phone.
The answer is that if you don't see the driver files mentioned in the thread above, it's because they're called something else, if they exist at all.
For the Moto 6, I spent a fair amount time doing trial and error renaming of system files until something worked. It took me some time and research to determine that for PIE, the .ko files represented some sort of driver files. Then, I went searching for .ko files with wifi in them, and then finally, I located the two files mentioned in the thread above. For your phone, they may be in a completely different directory, or named something different.
I knew that I had figured it out when I booted the phone, and was unable to get the wifi to work or even detect any signal.
Maybe there's a parameter file on your phone that controls the wifi settings, or maybe you rename driver files like I did.
I've done this a couple of times now on my kid's phones, and for each phone, the driver files were different. The last phone I did, I went ahead and posted to this forum so maybe someone else can get some benefit.
Best of luck!
-Oldguy51
An alternative solution for this issue is to assign a wrong universal local IP address for all wifi connections and the final user cant change it... Just Saying.
Wrong Universal Local IP Address
Orbitv said:
An alternative solution for this issue is to assign a wrong universal local IP address for all wifi connections and the final user cant change it... Just Saying.
Click to expand...
Click to collapse
That's in interesting concept. How would you do this on an Android phone?
etienne_9000 said:
Does not work for me
Hi
I have a Samsung Galaxy Grand Prime with LineageOs, rooted. I didnt find the files you were speaking about.
Except build.prop, but the mentioned lines didnt even exist in my phone files. Is there any other way to disable wifi permanently ?
Thanks
Click to expand...
Click to collapse
mdio said:
Sorry for the bump, but I really need to disable wifi in a Android 10 LineageOS based rom, but none of this solutions works...
How can I do this?
Click to expand...
Click to collapse
Well Well Well, I'm just 2 years late bumped on this thread .
It's Andoid 11 minimum in these times or even 12 & now 13 is also available.
But I managed to keep Wifi off while keeping Bluetooth Pairing & BT file transfers On, Hotspot On & Data On specially because Flight Mode no longer Disables WiFi, Bluetooth & Hotspot (only keeps Data off) since andoid 9 i think.
------------------ Worked on Andoid 11 GSI, Galaxy M-Series -----------------
I] If you just want WiFi disabled permanently, then Here are the steps that worked :
> Install Magisk or SuperSU And Optionally TWRP/Any Custom Recovery
> Install any Root Exploration app & grant it Root permissions
> Create a Backup (nandroid or anything that can backup your data)
> Using the Root Exploration app navigate to (vendor/etc/wifi)
> Look for the file ( wpa_supplicant_overlay.conf ), Tap and select Text Editor option
> Change to this -> [ p2p_disabled=0 ] , [ update_config=0 ], [ pmf=0 ] then tap Save.
> Reboot.
> Go to Settings >> Apps >> Bluetooth MIDI Service >> Reset the app
> Go to Settings >> Apps >> Bluetooth >> Reset the app
> Reset Network Settings (Settings >> System >> Reset Options >> Reset WiFi, Mobile & Bluetooth)
> Reset Firewall Settings(AFFirewall+, Netguard etc.)
> Reboot to Recovery
> Wipe Dalvik/ART Cache & Cache
> Reboot to System
Now WiFi & Location should be permanently disabled but you can still connect BT wireless & send/receive BT files (mp3, jpeg etc. but not apk, exe etc.) also Hotspot, Data , Manual Location (Not GPS Location) works.
#BUGS: Windows does not Connect Automatically to phone Hotspot, manual reconnect needed everytime. GPS Location breaks but Manual Location entry can be picked-up by apps like Opera Browser etc.
II] There is also another same way to get WiFi, BT, Hotspot Disabled while keeping ONLY Data Enabled but that was not the original question on this post so no need I guess.
Hopefully this might help someone who comes across a similarly bizarre situation. I've gone into detail to ensure anyone who tries this has all the info needed, so apologies for the biblical post but this 100% worked for me on my S6.
Ok, so here's the dilemma I was faced with which was a total nightmare. My phone (although otherwise fully functional) was slowing down a tad and becoming quite laggy so I decided to factory reset it (as I've done a hundred times before to several phones over the years). All the usual pre-requisites were carried out (back-ups taken, usb debugging on, reactivation lock cleared, etc.) I proceeded to factory reset the device, all went as expected without any issues. Once completed and at the 1st setup page, I selected language and proceeded. I set up WiFi connection and proceeded. I was then met with the next setup page, my Samsung Account. However, there was a message - "This device is locked because of an abnormal factory reset. Sign in to the Samsung account that you have already signed in to on this device to confirm that it belongs to you." Well, I naturally proceeded to enter my Samsung ID and correct password, but that's when things got weird. After a longer than expected period to sign in, I got a brief pop-up to say "Processing failed". That was it, no other explanation, no other option, no other way around it. I was now 100% locked out of my phone which I have had (store bought from brand new) for 2yrs. I contacted Samsung support, but I think we all know that was a complete waste of time - so I began to research extensively. I came here to XDA first but couldn't find any solution, I then scoured the web and checked a tonne of YT videos. Again, nothing doing - it was all either outdated information, Samsung had patched vulnerabilities, or the methods were just time-wasting idiots posting hoax fixes which did nothing. It was worth it to a point though because I got several tips and picked up some software. Then after about 8hrs, I stumbled across another post from someone here on XDA https://forum.xda-developers.com/verizon-galaxy-s6-edge/help/reactivation-lock-bypass-samsung-account-t3625723#post73617288. Massive thanks to him/her. The basis of his/her method definitely works, but I had a few improvements, particularly concerning the dialling of emergency numbers. So, that's the background to the issue I had and how I got to here. The following is the full method of what I did and I can say that I have a 100% fully functional S6 again. I've gone into this detail as I've found that a lot of posts can be a bit vague, so hopefully this helps someone out....
1. On the 1st setup wizard page after the factory reset has completed; select your language, then connect to (WiFi preferably). You then arrive at the Samsung Account sign-in and cannot proceed any further.
2. Make sure that your phone is NOT connected to your PC at this stage and just for clarity - also make sure than your SIM card is still in your phone. (Some instructions say to remove it, don't do that if you want this to work.)
3. Leave your phone alone for the moment.
4. Ensure that 'Samsung Drivers' for your phone are installed on your PC. (If they already are - great. If not, install them so that when you eventually connect your phone to your PC later, you can see it.
5. Next, download the terminal program here: https://drive.google.com/file/d/0B4OYgE4A8WCzckpyTDVuODc4TWs/view It's called Realterm and is only about 12MB. (There are other newer versions of this available, but this one worked for my purposes.) Extract the program and install (running it as Admin) and ensure that all 4 boxes are 'ticked' as you install (i.e. usually 'source' & 'DLPortIO' boxes are un-ticked, so put a tick in both and then complete the install. As the install completes, un-tick both boxes 'Register' and 'Show ReadMe'. Done. You should now have 'Realterm' icon on your desktop.
6. Back to your phone now. With it still stuck at the Samsung Account sign-in window (or any preceding window), connect the phone to your PC. If an 'installing drivers' pop-up appears on your PC, wait for the Samsung driver to finish installing. If on the other hand, you phone connects to your PC straight away, then proceed straight to 'Manage'. (i.e. Right-click on 'My Computer', select 'Manage' and select 'Device Manager' from the left list. Then in the main window select 'Modems', then right-click on 'Samsung Mobile USB Modem' and select 'Properties'. Hit the 'Modem' tab at the top and simply note the Port. It should be Com & a number, for example 'Com3'. Once noted, you can now close all 'Manage' windows.
7. Open 'Realterm' from your desktop icon by right-clicking and running as admin. (a) On the 'Display' tab, ensure the 'Half Duplex' box has a tick inside it. Don't mess with any other settings here. (b) Then hit on the 'Port' and ensure that the port number you noted from #6 above is selected. If it's not, select it using the dropdown option and once selected, apply it by hitting the 'Change' button with the green check-mark to the right. (c) Once completed, then hit on the 'Send' tab. Open the extracted folder where you installed the terminal program from (#5 above) and open the 'code.txt' file. Copy/paste the first line of text to the very first blank box (i.e. directly under the tabs 'Display', 'Port', 'Capture' etc.) Then hit the 'Send ASCII' button. You should see the pasted text in the black terminal window above, followed by 'ok'. Now remove the pasted text and copy/paste the second line from the 'code.txt' file to the exact same location. Again, hit the 'Send ASCII' button. **Now, quickly look at your phone screen as it should be attempting to make a call to a dead '900' number. You need to be quick, but cancel the call by hitting the red phone symbol and 'quickly' hit on the 'Message' button as if you were going to send a text.
8. You should now arrive at a screen where you can send a text message to the dead number 900. In the text field, type 'www.google.com' and send the text. The text goes nowhere, but now you've created a hyperlink to Google that you can follow (as long as you have WiFi on). Follow it by clicking on the link and you arrive at Google home screen.
9. Search for Package Disabler Pro 9.8.
10. Download it and install it.
11. After installing, you might get a pop-up window to say that PDP Engine needs to be installed in order for Package Disabler Pro to work. If so, install that too.
12. I also found that searching for and installing ES File Explorer was hugely beneficial, because (a) you have extremely limited functionality on your phone (i.e. you can download the programs, but can't just pull-down from the top of your screen to select them as you may be used to doing. As in, they install, but may not be easily selectable so you have to navigate to their location to run them and (b) now that you have partial access again via Google, you need to be careful not to lose your window of opportunity.
13. So, once you've downloaded & installed #9, #11 (if needed) & #12, open Package Disabler Pro.
14. Search for "Samsung account".
15. Once found, click on it, 'Clear Data' and then 'Disable' it.
16. Go back to Google now and search for QuickShortMaker.
17. Install it and open it. (You may need to use ES File Explorer to be able to navigate to it and open it.)
18. Within 'QuickShortMaker' > 'Incremental search' > 'Activities'; search for "Setup Wizard". It should be near the bottom. There are lots of setup wizards once you find it so pay close attention to specifics here.
19. Select the one with ".setupwizards.SetupExitActivity". (It's near the bottom of that particular screen but again, you need to pay attention to the small print and ensure you select the right one.)
20. Once you find it, select 'Create'.
21. Done! You can now restart your phone and after you select your language, then connect to WiFi, you will bypass Samsung Account and gain full access to your phone.
After this you can go and check that there is no Samsung account displayed (i.e. Settings > Accounts). There won't be, but you won't be able to add one at this point either....
1. Go back to Package Disabler Pro and re-enable the "Samsung Account" option.
2. Go to Storage (Settings > Storage) and clear all cache.
3. Go to Find my Mobile (Settings > Lock screen and security > Find my Mobile) and from there you should be prompted to insert your Samsung Account details to successfully add your Samsung account.
4. Once completed, you can either choose to do a Factory data reset (from within 'Settings' > 'Backup and reset'. NOT from recovery. Or you can simply restart your phone if you don't need a factory reset and you should be good to go.
5. Done, now you should have your Samsung account registered to your phone and can sync with your account.
This is what worked for me anyway and gave me full access back to my S6 running stock 6.0.1.
I've tried to be as detailed as I could with this post to ensure all necessary steps are there to follow. It may seem daunting to some before you try it, but I assure you it's relatively straightfoward and I had no problems. I hope someone finds it helpful and it recovers your S6 too if you get stuck in a similar situation to me. All the best.
Well done!
It worked well for me! Thank you!
I had such high hopes for this to work on my Samsung S4, but it doesn't I've got to step 7, did everything as you noted, and when i'm copying text and pressing "Send ASCII" button, it appears in the black field above, but isn't followed by "ok". I put in the second part of the text, still no "ok" and there is no call going through the phone.... I'm not able to proceed any further than this step. Why could that happen? Please help!
Linking to here would be better than writing a long wall of text, just saying. Also for S6 to S7 edge you can downgrade from nougat back to marshmallow 7.0 to 6.0 if needed for FRP bypass / Google Account lock.
http://forum.gsmhosting.com/vbb/f77...ote-7-frp-bypass-all-samsung-devices-2124806/
I'm stucked to the connection of my S6. I have an S6 Edge and it connect normally, but when I try the S6 that has a samsuns block, it says some problem with the driver even if I have installed the Samsung Driver Pack... Am I doing something wrong? Can someone help me please
i can get to the browser part, i downloaded all the apps i needed for this task, but when i try to install them it wont run the install and nothing happens so now i have a phone i cant get in to and apps sitting in the download folder in the phone and cant do anything with any of it....... looks like its just time to take a hammer to it and say hell with it
I Know the Thread is old
I can't reanable Samsung account, i enable it with package disabler, clear cache and nothing happens after hit add account und find my phone
warpilein said:
I Know the Thread is old
I can't reanable Samsung account, i enable it with package disabler, clear cache and nothing happens after hit add account und find my phone
Click to expand...
Click to collapse
Same here.
I can click on Samsung account +, but nothing happens.
If I try to make a samsung account over the option accounts....nothing happens....
swordomega said:
Same here.
I can click on Samsung account +, but nothing happens.
If I try to make a samsung account over the option accounts....nothing happens....
Click to expand...
Click to collapse
Now I made somehow another samsung accaunt over other means. made reset over this other samsung account.
After reboot/factory reset still stuck at samsung. WTF. Did samsung made it bulletproof in their updates?
thanks bro I followed all steps one by one and it worked like a charm thanks alot bro
thanks Big boss, I followed all steps one by one and it worked like a charm without any obstacle for my S5 device now i can use it like before many thanks bro for your valuable assistance and I really appreciate for it, there is no way I can pay you back but my plan is to appreciate ... keyse mire in mogadishu- Somalia via phone number 0615276667
i've got error at this stage...
at+creg?
+CREG: 0,3
OK
atd900;
CLIR:255
OK
ERROR
not call from 900 (
added steps and much headache
Decided I should add to the thread after break activation lock on my G900A (S5 AT&T) that had Android 6.0.1. Around Step 8 is where I got stock and used another thread to get the rest of the way in the phone...albeit a VERY long way around.
Instead of sending a text in Step 8, you can click the paperclip and long press google maps. There's some steps to get to the privacy policy / terms of use (I don't have all the things you had to click). From here, most people long press a word or phrase and use web search or assistant. I got stuck again with some security error.
However, the GOOGLE logo at the top of the page is clickable into Google app and voila I can search for Package Disabler. There is a waffle (3x3 dots) at the top and you can click PLAY STORE but it's the desktop version...dam! However, and it gets worse, you can download but not install any packages from app browser b/c it needs permission for storage. This is where it got hilarious. I found a package disabler download page that advertised to install their proprietary app....clicking that advertisement popped me into Play Store app....hurray!
I was able to search for chrome and open it (you can't download or install any apps from Play store)...then continue on with the with steps. I had difficulty getting package disabler installed with PDP but just kept retrying and it eventually worked. BAM....I'm past the setup login and on the home screen. However, still unable to get reactivation lock turned off nor able to factory reset. The option was not greyed out but putting in my samsung credentials was successful (I could even see my phone in Samsung Find my Phone) but reactivation lock still turned on. dam again! At this point i'm thinking to sell the phone with reactivation lock and try to make $20 on it.
After some interesting research, it appeared that Lollipop and Kitkat were not so secure when it came to Reactivation Lock. One thread suggested to delete your samsung account, downgrade to Lollipop first (then KitKat if unsuccessful), then re-create your samsung account with exact email and password, then boot the phone. This is what ultimately did the trick! I used ODIN and backed down to Android 5.1.1. I signed in and the first setup screen after signin asked to turn on reactivation lock. Unchecked and it's gone! I verified in the bootloader that indeed the lock is gone! HALLELUJAH!!!!!!!
It works on other samsung phones as well. I fixed a mega 2 using this method. Thanks a bunch
I can't see any texting option after cancelling 900 dead dial on Samsung S6
Please help me anyone
sc0rch3d said:
Decided I should add to the thread after break activation lock on my G900A (S5 AT&T) that had Android 6.0.1. Around Step 8 is where I got stock and used another thread to get the rest of the way in the phone...albeit a VERY long way around.
Instead of sending a text in Step 8, you can click the paperclip and long press google maps. There's some steps to get to the privacy policy / terms of use (I don't have all the things you had to click). From here, most people long press a word or phrase and use web search or assistant. I got stuck again with some security error.
However, the GOOGLE logo at the top of the page is clickable into Google app and voila I can search for Package Disabler. There is a waffle (3x3 dots) at the top and you can click PLAY STORE but it's the desktop version...dam! However, and it gets worse, you can download but not install any packages from app browser b/c it needs permission for storage. This is where it got hilarious. I found a package disabler download page that advertised to install their proprietary app....clicking that advertisement popped me into Play Store app....hurray!
I was able to search for chrome and open it (you can't download or install any apps from Play store)...then continue on with the with steps. I had difficulty getting package disabler installed with PDP but just kept retrying and it eventually worked. BAM....I'm past the setup login and on the home screen. However, still unable to get reactivation lock turned off nor able to factory reset. The option was not greyed out but putting in my samsung credentials was successful (I could even see my phone in Samsung Find my Phone) but reactivation lock still turned on. dam again! At this point i'm thinking to sell the phone with reactivation lock and try to make $20 on it.
After some interesting research, it appeared that Lollipop and Kitkat were not so secure when it came to Reactivation Lock. One thread suggested to delete your samsung account, downgrade to Lollipop first (then KitKat if unsuccessful), then re-create your samsung account with exact email and password, then boot the phone. This is what ultimately did the trick! I used ODIN and backed down to Android 5.1.1. I signed in and the first setup screen after signin asked to turn on reactivation lock. Unchecked and it's gone! I verified in the bootloader that indeed the lock is gone! HALLELUJAH!!!!!!!
Click to expand...
Click to collapse
I found a much simpler work around. After you long press google maps, simply open the sidebar menu and press Google earth. It will pop you into the play store app on the Google earth app page. Just search for package disable pro and pdp engine and voila! The only catch is the app itself is $3.45 and I don't think the free version is available anymore. I bought it just to use for this and was going to get it refunded once I'm done. But that avoids the hassle of finding the link that will take you to the store app since I searched endlessly for that promised link to no avail, lol
Sent from my perry using XDA Labs
Also, I ended up having to download an app named blackmart in order to get the PDP app. Even after purchasing through play store. So if anyone needs the apks I can try uploading to a hosting site to save the hassle
what do you mean exactly when you say "android drivers" on your pc?
An opportunity to access phone settings and home screen
The..King said:
Hopefully this might help someone who comes across a similarly bizarre situation. I've gone into detail to ensure anyone who tries this has all the info needed, so apologies for the biblical post but this 100% worked for me on my S6.
Ok, so here's the dilemma I was faced with which was a total nightmare. My phone (although otherwise fully functional) was slowing down a tad and becoming quite laggy so I decided to factory reset it (as I've done a hundred times before to several phones over the years). All the usual pre-requisites were carried out (back-ups taken, usb debugging on, reactivation lock cleared, etc.) I proceeded to factory reset the device, all went as expected without any issues. Once completed and at the 1st setup page, I selected language and proceeded. I set up WiFi connection and proceeded. I was then met with the next setup page, my Samsung Account. However, there was a message - "This device is locked because of an abnormal factory reset. Sign in to the Samsung account that you have already signed in to on this device to confirm that it belongs to you." Well, I naturally proceeded to enter my Samsung ID and correct password, but that's when things got weird. After a longer than expected period to sign in, I got a brief pop-up to say "Processing failed". That was it, no other explanation, no other option, no other way around it. I was now 100% locked out of my phone which I have had (store bought from brand new) for 2yrs. I contacted Samsung support, but I think we all know that was a complete waste of time - so I began to research extensively. I came here to XDA first but couldn't find any solution, I then scoured the web and checked a tonne of YT videos. Again, nothing doing - it was all either outdated information, Samsung had patched vulnerabilities, or the methods were just time-wasting idiots posting hoax fixes which did nothing. It was worth it to a point though because I got several tips and picked up some software. Then after about 8hrs, I stumbled across another post from someone here on XDA https://forum.xda-developers.com/verizon-galaxy-s6-edge/help/reactivation-lock-bypass-samsung-account-t3625723#post73617288. Massive thanks to him/her. The basis of his/her method definitely works, but I had a few improvements, particularly concerning the dialling of emergency numbers. So, that's the background to the issue I had and how I got to here. The following is the full method of what I did and I can say that I have a 100% fully functional S6 again. I've gone into this detail as I've found that a lot of posts can be a bit vague, so hopefully this helps someone out....
1. On the 1st setup wizard page after the factory reset has completed; select your language, then connect to (WiFi preferably). You then arrive at the Samsung Account sign-in and cannot proceed any further.
2. Make sure that your phone is NOT connected to your PC at this stage and just for clarity - also make sure than your SIM card is still in your phone. (Some instructions say to remove it, don't do that if you want this to work.)
3. Leave your phone alone for the moment.
4. Ensure that 'Samsung Drivers' for your phone are installed on your PC. (If they already are - great. If not, install them so that when you eventually connect your phone to your PC later, you can see it.
5. Next, download the terminal program here: https://drive.google.com/file/d/0B4OYgE4A8WCzckpyTDVuODc4TWs/view It's called Realterm and is only about 12MB. (There are other newer versions of this available, but this one worked for my purposes.) Extract the program and install (running it as Admin) and ensure that all 4 boxes are 'ticked' as you install (i.e. usually 'source' & 'DLPortIO' boxes are un-ticked, so put a tick in both and then complete the install. As the install completes, un-tick both boxes 'Register' and 'Show ReadMe'. Done. You should now have 'Realterm' icon on your desktop.
6. Back to your phone now. With it still stuck at the Samsung Account sign-in window (or any preceding window), connect the phone to your PC. If an 'installing drivers' pop-up appears on your PC, wait for the Samsung driver to finish installing. If on the other hand, you phone connects to your PC straight away, then proceed straight to 'Manage'. (i.e. Right-click on 'My Computer', select 'Manage' and select 'Device Manager' from the left list. Then in the main window select 'Modems', then right-click on 'Samsung Mobile USB Modem' and select 'Properties'. Hit the 'Modem' tab at the top and simply note the Port. It should be Com & a number, for example 'Com3'. Once noted, you can now close all 'Manage' windows.
7. Open 'Realterm' from your desktop icon by right-clicking and running as admin. (a) On the 'Display' tab, ensure the 'Half Duplex' box has a tick inside it. Don't mess with any other settings here. (b) Then hit on the 'Port' and ensure that the port number you noted from #6 above is selected. If it's not, select it using the dropdown option and once selected, apply it by hitting the 'Change' button with the green check-mark to the right. (c) Once completed, then hit on the 'Send' tab. Open the extracted folder where you installed the terminal program from (#5 above) and open the 'code.txt' file. Copy/paste the first line of text to the very first blank box (i.e. directly under the tabs 'Display', 'Port', 'Capture' etc.) Then hit the 'Send ASCII' button. You should see the pasted text in the black terminal window above, followed by 'ok'. Now remove the pasted text and copy/paste the second line from the 'code.txt' file to the exact same location. Again, hit the 'Send ASCII' button. **Now, quickly look at your phone screen as it should be attempting to make a call to a dead '900' number. You need to be quick, but cancel the call by hitting the red phone symbol and 'quickly' hit on the 'Message' button as if you were going to send a text.
8. You should now arrive at a screen where you can send a text message to the dead number 900. In the text field, type 'www.google.com' and send the text. The text goes nowhere, but now you've created a hyperlink to Google that you can follow (as long as you have WiFi on). Follow it by clicking on the link and you arrive at Google home screen.
9. Search for Package Disabler Pro 9.8.
10. Download it and install it.
11. After installing, you might get a pop-up window to say that PDP Engine needs to be installed in order for Package Disabler Pro to work. If so, install that too.
12. I also found that searching for and installing ES File Explorer was hugely beneficial, because (a) you have extremely limited functionality on your phone (i.e. you can download the programs, but can't just pull-down from the top of your screen to select them as you may be used to doing. As in, they install, but may not be easily selectable so you have to navigate to their location to run them and (b) now that you have partial access again via Google, you need to be careful not to lose your window of opportunity.
13. So, once you've downloaded & installed #9, #11 (if needed) & #12, open Package Disabler Pro.
14. Search for "Samsung account".
15. Once found, click on it, 'Clear Data' and then 'Disable' it.
16. Go back to Google now and search for QuickShortMaker.
17. Install it and open it. (You may need to use ES File Explorer to be able to navigate to it and open it.)
18. Within 'QuickShortMaker' > 'Incremental search' > 'Activities'; search for "Setup Wizard". It should be near the bottom. There are lots of setup wizards once you find it so pay close attention to specifics here.
19. Select the one with ".setupwizards.SetupExitActivity". (It's near the bottom of that particular screen but again, you need to pay attention to the small print and ensure you select the right one.)
20. Once you find it, select 'Create'.
21. Done! You can now restart your phone and after you select your language, then connect to WiFi, you will bypass Samsung Account and gain full access to your phone.
After this you can go and check that there is no Samsung account displayed (i.e. Settings > Accounts). There won't be, but you won't be able to add one at this point either....
1. Go back to Package Disabler Pro and re-enable the "Samsung Account" option.
2. Go to Storage (Settings > Storage) and clear all cache.
3. Go to Find my Mobile (Settings > Lock screen and security > Find my Mobile) and from there you should be prompted to insert your Samsung Account details to successfully add your Samsung account.
4. Once completed, you can either choose to do a Factory data reset (from within 'Settings' > 'Backup and reset'. NOT from recovery. Or you can simply restart your phone if you don't need a factory reset and you should be good to go.
5. Done, now you should have your Samsung account registered to your phone and can sync with your account.
This is what worked for me anyway and gave me full access back to my S6 running stock 6.0.1.
I've tried to be as detailed as I could with this post to ensure all necessary steps are there to follow. It may seem daunting to some before you try it, but I assure you it's relatively straightfoward and I had no problems. I hope someone finds it helpful and it recovers your S6 too if you get stuck in a similar situation to me. All the best.
Click to expand...
Click to collapse
Hello. I know the thread is old but this may help. None of the Samsungs I've used did happen to work with Realterm yet (not saying it does not work). So here is an alternative that can drive you straight into the device setting. There choose "Easy Mode" an boom on the home screen. From home screen tap "easy settings/easy mode an activate normal mode. I tried this method on my Note 4 (SM-N910T) and It worked.
Steps :
1- Download and flash the firmware with Odin or whatever capable box/tool (but ou may skip this step if "lock screen like slide to unlock" is activated in the locked phone). To know this option is on just press power to turn off/on the screen. If you see a lock screen instead of the "choose language" screen go to step 2. If not "DON'T FACCTORY RESET". It won't help. Flash as many times as required until you get to a lock screen. Just off/on the sreen to see.
2- From the lock screen swipe on the "Phone" icon and choose the contact app.
3- On the new call window, tap "contacts" on the upper right then open options (the 3 vertical dots) and choose settings/contacts/accounts an add a google account. This account should have a contact with email in it. For example I added my google account which had many contacts with emailss, I then ranomly chose a name with email and tried to send an email.
4- From email editing screen select the 3 dots of options and go to accounts.
5- A seurity mini window will pop up. Accept it.
6- Boom you are in the settings.
7- Search for "easy mode" and apply it. You'll land on the home screen.
8- You can have access to normal screen by going to easy setting/easy mode/normal mode .and apply.
9- Direct install package disabler and other needed apps from pc or send them to your phone memory an manual install them.
10- Follow the instructions from The..King to bypass now that you can do it.
NB: BE CAREFUL NOT TO USE HOME BUTTON TO GO BACK TO HOME SCREEN OR YOU WILL BE WELCOME BY A BLANK BLACK SCREEN. USE BACK BUTTON INSTEAD. OR USE RECENT WINDOWS BUTTON TO ACCESS BEFORE USED APPS. IF YOU WANT TO CLEAR RECENT APPS KEEP "SETTINGS" WINDOWS AS YOU CAN HAVE THE CONTROL BACK THE EASY MODE/NORMAL MODE.
SHALOM
The..King said:
Hopefully this might help someone who comes across a similarly bizarre situation. I've gone into detail to ensure anyone who tries this has all the info needed, so apologies for the biblical post but this 100% worked for me on my S6.
Ok, so here's the dilemma I was faced with which was a total nightmare. My phone (although otherwise fully functional) was slowing down a tad and becoming quite laggy so I decided to factory reset it (as I've done a hundred times before to several phones over the years). All the usual pre-requisites were carried out (back-ups taken, usb debugging on, reactivation lock cleared, etc.) I proceeded to factory reset the device, all went as expected without any issues. Once completed and at the 1st setup page, I selected language and proceeded. I set up WiFi connection and proceeded. I was then met with the next setup page, my Samsung Account. However, there was a message - "This device is locked because of an abnormal factory reset. Sign in to the Samsung account that you have already signed in to on this device to confirm that it belongs to you." Well, I naturally proceeded to enter my Samsung ID and correct password, but that's when things got weird. After a longer than expected period to sign in, I got a brief pop-up to say "Processing failed". That was it, no other explanation, no other option, no other way around it. I was now 100% locked out of my phone which I have had (store bought from brand new) for 2yrs. I contacted Samsung support, but I think we all know that was a complete waste of time - so I began to research extensively. I came here to XDA first but couldn't find any solution, I then scoured the web and checked a tonne of YT videos. Again, nothing doing - it was all either outdated information, Samsung had patched vulnerabilities, or the methods were just time-wasting idiots posting hoax fixes which did nothing. It was worth it to a point though because I got several tips and picked up some software. Then after about 8hrs, I stumbled across another post from someone here on XDA https://forum.xda-developers.com/verizon-galaxy-s6-edge/help/reactivation-lock-bypass-samsung-account-t3625723#post73617288. Massive thanks to him/her. The basis of his/her method definitely works, but I had a few improvements, particularly concerning the dialling of emergency numbers. So, that's the background to the issue I had and how I got to here. The following is the full method of what I did and I can say that I have a 100% fully functional S6 again. I've gone into this detail as I've found that a lot of posts can be a bit vague, so hopefully this helps someone out....
1. On the 1st setup wizard page after the factory reset has completed; select your language, then connect to (WiFi preferably). You then arrive at the Samsung Account sign-in and cannot proceed any further.
2. Make sure that your phone is NOT connected to your PC at this stage and just for clarity - also make sure than your SIM card is still in your phone. (Some instructions say to remove it, don't do that if you want this to work.)
3. Leave your phone alone for the moment.
4. Ensure that 'Samsung Drivers' for your phone are installed on your PC. (If they already are - great. If not, install them so that when you eventually connect your phone to your PC later, you can see it.
5. Next, download the terminal program here: https://drive.google.com/file/d/0B4OYgE4A8WCzckpyTDVuODc4TWs/view It's called Realterm and is only about 12MB. (There are other newer versions of this available, but this one worked for my purposes.) Extract the program and install (running it as Admin) and ensure that all 4 boxes are 'ticked' as you install (i.e. usually 'source' & 'DLPortIO' boxes are un-ticked, so put a tick in both and then complete the install. As the install completes, un-tick both boxes 'Register' and 'Show ReadMe'. Done. You should now have 'Realterm' icon on your desktop.
6. Back to your phone now. With it still stuck at the Samsung Account sign-in window (or any preceding window), connect the phone to your PC. If an 'installing drivers' pop-up appears on your PC, wait for the Samsung driver to finish installing. If on the other hand, you phone connects to your PC straight away, then proceed straight to 'Manage'. (i.e. Right-click on 'My Computer', select 'Manage' and select 'Device Manager' from the left list. Then in the main window select 'Modems', then right-click on 'Samsung Mobile USB Modem' and select 'Properties'. Hit the 'Modem' tab at the top and simply note the Port. It should be Com & a number, for example 'Com3'. Once noted, you can now close all 'Manage' windows.
7. Open 'Realterm' from your desktop icon by right-clicking and running as admin. (a) On the 'Display' tab, ensure the 'Half Duplex' box has a tick inside it. Don't mess with any other settings here. (b) Then hit on the 'Port' and ensure that the port number you noted from #6 above is selected. If it's not, select it using the dropdown option and once selected, apply it by hitting the 'Change' button with the green check-mark to the right. (c) Once completed, then hit on the 'Send' tab. Open the extracted folder where you installed the terminal program from (#5 above) and open the 'code.txt' file. Copy/paste the first line of text to the very first blank box (i.e. directly under the tabs 'Display', 'Port', 'Capture' etc.) Then hit the 'Send ASCII' button. You should see the pasted text in the black terminal window above, followed by 'ok'. Now remove the pasted text and copy/paste the second line from the 'code.txt' file to the exact same location. Again, hit the 'Send ASCII' button. **Now, quickly look at your phone screen as it should be attempting to make a call to a dead '900' number. You need to be quick, but cancel the call by hitting the red phone symbol and 'quickly' hit on the 'Message' button as if you were going to send a text.
8. You should now arrive at a screen where you can send a text message to the dead number 900. In the text field, type 'www.google.com' and send the text. The text goes nowhere, but now you've created a hyperlink to Google that you can follow (as long as you have WiFi on). Follow it by clicking on the link and you arrive at Google home screen.
9. Search for Package Disabler Pro 9.8.
10. Download it and install it.
11. After installing, you might get a pop-up window to say that PDP Engine needs to be installed in order for Package Disabler Pro to work. If so, install that too.
12. I also found that searching for and installing ES File Explorer was hugely beneficial, because (a) you have extremely limited functionality on your phone (i.e. you can download the programs, but can't just pull-down from the top of your screen to select them as you may be used to doing. As in, they install, but may not be easily selectable so you have to navigate to their location to run them and (b) now that you have partial access again via Google, you need to be careful not to lose your window of opportunity.
13. So, once you've downloaded & installed #9, #11 (if needed) & #12, open Package Disabler Pro.
14. Search for "Samsung account".
15. Once found, click on it, 'Clear Data' and then 'Disable' it.
16. Go back to Google now and search for QuickShortMaker.
17. Install it and open it. (You may need to use ES File Explorer to be able to navigate to it and open it.)
18. Within 'QuickShortMaker' > 'Incremental search' > 'Activities'; search for "Setup Wizard". It should be near the bottom. There are lots of setup wizards once you find it so pay close attention to specifics here.
19. Select the one with ".setupwizards.SetupExitActivity". (It's near the bottom of that particular screen but again, you need to pay attention to the small print and ensure you select the right one.)
20. Once you find it, select 'Create'.
21. Done! You can now restart your phone and after you select your language, then connect to WiFi, you will bypass Samsung Account and gain full access to your phone.
After this you can go and check that there is no Samsung account displayed (i.e. Settings > Accounts). There won't be, but you won't be able to add one at this point either....
1. Go back to Package Disabler Pro and re-enable the "Samsung Account" option.
2. Go to Storage (Settings > Storage) and clear all cache.
3. Go to Find my Mobile (Settings > Lock screen and security > Find my Mobile) and from there you should be prompted to insert your Samsung Account details to successfully add your Samsung account.
4. Once completed, you can either choose to do a Factory data reset (from within 'Settings' > 'Backup and reset'. NOT from recovery. Or you can simply restart your phone if you don't need a factory reset and you should be good to go.
5. Done, now you should have your Samsung account registered to your phone and can sync with your account.
This is what worked for me anyway and gave me full access back to my S6 running stock 6.0.1.
I've tried to be as detailed as I could with this post to ensure all necessary steps are there to follow. It may seem daunting to some before you try it, but I assure you it's relatively straightfoward and I had no problems. I hope someone finds it helpful and it recovers your S6 too if you get stuck in a similar situation to me. All the best.
Click to expand...
Click to collapse
Works like balerina. I read this post many times. I have no Windows Machine thus I can not use amazing Real Term.
I found bloated 6.0.1 ROM for SM-G925F From Globe Philipines G925FXXS5DRB1_G925FOLB4DQJ1_G925FXXS5DRA2 . I understand the most important is How to open Browser . This ROM give a Golden Chance to access browser. I used other android phone to set up google account via NFC. After completing setting up google account ROM asking to add another email account. So I choose Yahoo > tap sign up > privacy policy it will pop up two option > open using Chrome or Samsung Browser. Choose Chrome.
A. Turn S6E to download mode.
B. Flash the bootloader (sboot.bin), hidden.img, system.img (i used heimdall on gentoo linux)
- heimdall flash --BOOTLOADER sboot.bin --HIDDEN hidden.img --SYSTEM system.img
- Nougat boot will booting 6.0 properly.
C. Booting up
D. Setup google account.
E. On the page to set another email. choose Yahoo > tap Sign Up > tap Privacy Policy > this will pop up the browser > choose chrome
From here you just follow above #9 to Finish.
x1123 said:
Works like balerina. I read this post many times. I have no Windows Machine thus I can not use amazing Real Term.
I found bloated 6.0.1 ROM for SM-G925F From Globe Philipines G925FXXS5DRB1_G925FOLB4DQJ1_G925FXXS5DRA2 . I understand the most important is How to open Browser . This ROM give a Golden Chance to access browser. I used other android phone to set up google account via NFC. After completing setting up google account ROM asking to add another email account. So I choose Yahoo > tap sign up > privacy policy it will pop up two option > open using Chrome or Samsung Browser. Choose Chrome.
A. Turn S6E to download mode.
B. Flash the bootloader (sboot.bin), hidden.img, system.img (i used heimdall on gentoo linux)
- heimdall flash --BOOTLOADER sboot.bin --HIDDEN hidden.img --SYSTEM system.img
- Nougat boot will booting 6.0 properly.
C. Booting up
D. Setup google account.
E. On the page to set another email. choose Yahoo > tap Sign Up > tap Privacy Policy > this will pop up the browser > choose chrome
From here you just follow above #9 to Finish.
Click to expand...
Click to collapse
Is there some way to use heimdall in a Windows Machine?
Hello to all my fellow XDA members! I have literally spent the last eight days attempting to get past the FRP (Factory Reset Protection) lock on my Verizon Samsung Galaxy Note 5 (SM-N920V). As many of you may know, it is nearly impossible, as the Verizon phones have a locked bootloader and thus we cannot install TWRP. Using Odin to reflash OEM firmware does not do the trick either, as FRP persists past all of this.
Well, I have finally come across a solution. The first problem I encountered was that I was on Nougat 7.0 firmware. You want to downgrade to Marshmallow 6.0.1 firmware, which can be found by googling "N920VVRS3BPI1_N920VVZW3BPI1_N920VVRS3BPI1_HOME.zip". That is a ROM specific to the SM-N920V. If you are on any other carrier, this will NOT work for you, so you will need to find the Marshmallow ROM for your respective device.
***Please Note: This should work on any device that can be downgraded to Marshmallow 6.0.1 or earlier, but it is NOT guaranteed. I have NOT tested it on any other devices than my Note 5. Please do feel free to try and report back.
Using Marshmallow allows us to take advantage of a bluetooth bypass where we can access apps, namely Chrome and Settings. An important note about the bluetooth headset is that it can be any headset but it must have a button that invokes voice command, i.e Siri or Google Assistant. This will not work otherwise!
Firstly, I must give credit where credit is due, so credit to @MrMike2182 with his "How to downgrade from Nougat 7 to Marshmellow 6.0.1" post, which is how I got the idea in the first place. In his post, you can find a link to download the ROM. Other credit goes to GLOBAL Skills on YouTube with their "Samsung note 5 frp Google bypass as always %100 works" video. I hate the way they worded their title and it seems like one of those fake videos but trust me, it works.
What you need: (I would suggest downloading these from APKMirror for no frills or troubles. Don't download them now, wait until you get to Chrome on the device.)
Odin3 v3.12.3
Marshmallow ROM for your device
USB Cable
Bluetooth Headset
Google Account Manager 6.0.1 APK
Quick Shortcut Manager 2.4.0 APK
Steps:
Reboot into Download Mode. For the Note 5, this is acheived by pressing and holding the power button, volume down button, and home button. A screen will pop up asking if you want to continue. Press the volume up key.
Connect your device to the computer through the USB cable
In Odin, click AP and choose your Marshmallow ROM. Flash the ROM and let the phone reboot
Put your bluetooth headset in pairing mode
Tap "Emergency Call" and type 112
Once the call screen pops up, tap bluetooth, wait for the device to appear and when done pairing, end the call
Setup a wifi connection
Press the voice command key on your bluetooth headset and choose Google
Say anything, it doesn't matter, we just need to get to the search screen
Once at the search screen, type in Chrome, then choose the Chrome app
Using Chrome, download the Google Account Manager apk (wait until it finishes downloading to tap open and install it right away)
The system is going to tell you that the install is blocked as we need to enable the installation of apps from unknown sources. Tap on settings and tap the slider next to "Unknown sources". Make sure you uncheck the "Allow this installation only" box so we don't have to repeat the process.
Once the install is finished, click done. Now download the Quick Shortcut Manager and install that. When that install is done, open the app.
In the "Input keyword to filter" field, type in Google Account Manager. Tap on it to expand the tasks. Tap on the first one that says "Type Email and Password" (NOT the .EduLoginActivity one).
Tap Try, which will take you to a screen prompting you for your password. In the upper right hand corner, tap the three dots for the "Browser Sign-In" option, and acknowledge the terms.
Now login using whatever Google account you want associated with the phone. It might take a while, don't worry.
Restart the phone. When it restarts, keep tapping next to get through the setup process. When you reach "Just a sec...", this might also take a while. Do not worry :silly:
Done! You can finish out the setup process however you like. Enjoy your phone!
wow, awesome, thanks!!! worked like a charm on my sm-n920v
Skimmed this over and seen the "dial 112" part in step 5.
This will indeed phone the police.
nadcicle said:
Skimmed this over and seen the "dial 112" part in step 5.
This will indeed phone the police.
Click to expand...
Click to collapse
What Country are you in? In the US & Canada, police emergency dial is 911
Sent from my SM-N920V using Tapatalk
donc113 said:
What Country are you in? In the US & Canada, police emergency dial is 911
Sent from my SM-N920V using Tapatalk
Click to expand...
Click to collapse
I am in the US. Tennessee to be exact.
On N920V Nougat 7.0 Download Mode blocked by FRP . And impossible to flash nothing for downgrade
I was able to flash to image
and now I can join a bluetooth headset to the device, but the voice key thing is not working for me.
nadcicle said:
I am in the US. Tennessee to be exact.
Click to expand...
Click to collapse
yep... I'm in Tn too.. it called the piggies. smh
Yeah, 112 dials the local emergency for me too, in FL.
For anyone else who's trying to do this and can't get it to work, these instructions worked for me!
https://addrom.com/how-to-bypass-frp-samsung-note-5-android-7-security-2018/
---------- Post added at 08:30 PM ---------- Previous post was at 08:30 PM ----------
Yeah, 112 dials the local emergency for me too, in FL.
For anyone else who's trying to do this and can't get it to work, these instructions worked for me!
https://addrom.com/how-to-bypass-frp-samsung-note-5-android-7-security-2018/
Quick shortcut manager??
Cannot find Quick shortcut manager, only Quick shortcut Maker. Is this the same?
ivtechboyinpa said:
Hello to all my fellow XDA members! I have literally spent the last eight days attempting to get past the FRP (Factory Reset Protection) lock on my Verizon Samsung Galaxy Note 5 (SM-N920V). As many of you may know, it is nearly impossible, as the Verizon phones have a locked bootloader and thus we cannot install TWRP. Using Odin to reflash OEM firmware does not do the trick either, as FRP persists past all of this.
Well, I have finally come across a solution. The first problem I encountered was that I was on Nougat 7.0 firmware. You want to downgrade to Marshmallow 6.0.1 firmware, which can be found by googling "N920VVRS3BPI1_N920VVZW3BPI1_N920VVRS3BPI1_HOME.zip". That is a ROM specific to the SM-N920V. If you are on any other carrier, this will NOT work for you, so you will need to find the Marshmallow ROM for your respective device.
***Please Note: This should work on any device that can be downgraded to Marshmallow 6.0.1 or earlier, but it is NOT guaranteed. I have NOT tested it on any other devices than my Note 5. Please do feel free to try and report back.
Using Marshmallow allows us to take advantage of a bluetooth bypass where we can access apps, namely Chrome and Settings. An important note about the bluetooth headset is that it can be any headset but it must have a button that invokes voice command, i.e Siri or Google Assistant. This will not work otherwise!
Firstly, I must give credit where credit is due, so credit to @MrMike2182 with his "How to downgrade from Nougat 7 to Marshmellow 6.0.1" post, which is how I got the idea in the first place. In his post, you can find a link to download the ROM. Other credit goes to GLOBAL Skills on YouTube with their "Samsung note 5 frp Google bypass as always %100 works" video. I hate the way they worded their title and it seems like one of those fake videos but trust me, it works.
What you need: (I would suggest downloading these from APKMirror for no frills or troubles. Don't download them now, wait until you get to Chrome on the device.)
Odin3 v3.12.3
Marshmallow ROM for your device
USB Cable
Bluetooth Headset
Google Account Manager 6.0.1 APK
Quick Shortcut Manager 2.4.0 APK
Steps:
Reboot into Download Mode. For the Note 5, this is acheived by pressing and holding the power button, volume down button, and home button. A screen will pop up asking if you want to continue. Press the volume up key.
Connect your device to the computer through the USB cable
In Odin, click AP and choose your Marshmallow ROM. Flash the ROM and let the phone reboot
Put your bluetooth headset in pairing mode
Tap "Emergency Call" and type 112
Once the call screen pops up, tap bluetooth, wait for the device to appear and when done pairing, end the call
Setup a wifi connection
Press the voice command key on your bluetooth headset and choose Google
Say anything, it doesn't matter, we just need to get to the search screen
Once at the search screen, type in Chrome, then choose the Chrome app
Using Chrome, download the Google Account Manager apk (wait until it finishes downloading to tap open and install it right away)
The system is going to tell you that the install is blocked as we need to enable the installation of apps from unknown sources. Tap on settings and tap the slider next to "Unknown sources". Make sure you uncheck the "Allow this installation only" box so we don't have to repeat the process.
Once the install is finished, click done. Now download the Quick Shortcut Manager and install that. When that install is done, open the app.
In the "Input keyword to filter" field, type in Google Account Manager. Tap on it to expand the tasks. Tap on the first one that says "Type Email and Password" (NOT the .EduLoginActivity one).
Tap Try, which will take you to a screen prompting you for your password. In the upper right hand corner, tap the three dots for the "Browser Sign-In" option, and acknowledge the terms.
Now login using whatever Google account you want associated with the phone. It might take a while, don't worry.
Restart the phone. When it restarts, keep tapping next to get through the setup process. When you reach "Just a sec...", this might also take a while. Do not worry :silly:
Done! You can finish out the setup process however you like. Enjoy your phone!
Click to expand...
Click to collapse
Homer265 said:
Cannot find Quick shortcut manager, only Quick shortcut Maker. Is this the same?
Click to expand...
Click to collapse
worked for me!
Anybody want to test out my kernel image. https://drive.google.com/open?id=1Hl90m3sKz3rQVv7CCziHkA3hiV2m7qyn I think I found out what is causing no root/ no boot on the verizon note 5. Just download my zip, unpack set aside. Now split your booted boot.img and copy name of zImage in your split image folder. Rename downloaded Image to the name of your zimage and put in your booted split image folder replacing your exisiting zimage. Repack and install into your device. See if it boots and give root privilege.
I cant test because I dont have sm-n920v no more, but applied verizon code to my sm-N920p kernel and I got the no boot, or stuck on galaxy note screen that happens when you try to do with verizon note 5. I removed code and kernel booted.