im new to the Motorola razr hd. I have an XT925 from Claro PR
I downloaded two of claro firmware images and neither want to flash. I know how to use fastboot and rsdlite is not complicated, it seems to be the phones partition or something along those lines.
the phone itself boots up but im greeted to a screen saying "encryption unsuccessful" and gives an option to reset or factory reset the phone. if you hit it it does nothing.
I tried a hard reset on recovery and it seems like it works but it says afterwards that it cant mount cache/recovery/log or something like it. and upon boot it stays the same.
tried flashing through fastboot and mfastboot. bootloader is locked and it cant be unlocked...
what else can be done. errors say FAILED (remote failure)
Code:
Flashing bootloader images ...
So as to use latest flash capabilities
sending 'partition' (32 KB)...
OKAY [ 0.530s]
writing 'partition'...
This may take a few seconds, if a
different partition table is being
flashed since we need to backup
and restore a few partitions
Failed to program partition table
FAILED (remote failure)
finished. total time: 1.373s
sending 'sbl1' (101 KB)...
OKAY [ 0.655s]
writing 'sbl1'...
Failed to erase partition
Failed to flash partition sbl1
FAILED (remote failure)
finished. total time: 1.108s
sending 'sbl2' (127 KB)...
OKAY [ 0.562s]
writing 'sbl2'...
Failed to erase partition
Failed to flash partition sbl2
FAILED (remote failure)
finished. total time: 1.108s
sending 'sbl3' (512 KB)...
OKAY [ 0.718s]
writing 'sbl3'...
Failed to erase partition
Failed to flash partition sbl3
FAILED (remote failure)
finished. total time: 1.388s
sending 'rpm' (140 KB)...
OKAY [ 0.593s]
writing 'rpm'...
Failed to erase partition
Failed to flash partition rpm
FAILED (remote failure)
finished. total time: 1.201s
sending 'tz' (192 KB)...
OKAY [ 0.655s]
writing 'tz'...
Failed to erase partition
Failed to flash partition tz
FAILED (remote failure)
finished. total time: 1.108s
sending 'aboot' (256 KB)...
OKAY [ 0.406s]
writing 'aboot'...
Failed to erase partition
Failed to flash partition aboot
FAILED (remote failure)
finished. total time: 1.076s
Flashing modem SW...
sending 'modem' (30720 KB)...
OKAY [ 6.209s]
writing 'modem'...
Failed to erase partition
Failed to erase partition
Failed to write mmc
FAILED (remote failure)
finished. total time: 6.848s
sending 'fsg' (2852 KB)...
OKAY [ 0.952s]
writing 'fsg'...
Failed to erase partition
Failed to flash partition fsg
FAILED (remote failure)
finished. total time: 1.388s
erasing 'modemst1'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.265s
erasing 'modemst2'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.374s
Flashing AP Images...
sending 'logo' (1709 KB)...
OKAY [ 0.874s]
writing 'logo'...
Failed to erase partition
Failed to flash partition logo
FAILED (remote failure)
finished. total time: 1.373s
sending 'boot' (10240 KB)...
OKAY [ 1.810s]
writing 'boot'...
Failed to erase partition
Failed to flash partition boot
FAILED (remote failure)
finished. total time: 3.058s
sending 'recovery' (10240 KB)...
OKAY [ 2.200s]
writing 'recovery'...
Failed to erase partition
Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 3.588s
sending 'devtree' (512 KB)...
OKAY [ 0.530s]
writing 'devtree'...
Failed to erase partition
Failed to flash partition devtree
FAILED (remote failure)
finished. total time: 1.217s
sending 'system' (30720 KB)...
OKAY [ 6.178s]
writing 'system'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 8.720s
erasing 'tombstones'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.359s
sending 'cdrom' (30720 KB)...
OKAY [ 5.850s]
writing 'cdrom'...
Failed to erase partition
Failed to erase partition
Failed to write mmc
FAILED (remote failure)
finished. total time: 8.424s
erasing 'cache'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.062s
Erasing userdata...
erasing 'userdata'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.062s
All images flashed. Check logs for errors!
Press any key to continue . . .
Also I've spent 2 days searching reading and trying different things
Sent from my HTC Sensation using Tapatalk 4
Is there something to repartition? Like a PIT file
Sent from my HTC Sensation using Tapatalk 4
ceyo14 said:
Is there something to repartition? Like a PIT file
Sent from my HTC Sensation using Tapatalk 4
Click to expand...
Click to collapse
This thread, though it may not seem related, will probably pull you through.
http://forum.xda-developers.com/showthread.php?t=2273574
I did read it but their problem was that effectively and unintentionally they were trying to downgrade...
I just get remote failure. Ive had this problem on some galaxys that was solved with a repartition.
Sent from my HTC Sensation using Tapatalk 4
Not the remote failure but the fact that it can't format because it couldn't find the partition....
Sent from my HTC Sensation using Tapatalk 4
Is there really nothing for this? No other tools or something?
No gurus here?
Sent from my HTC Sensation using Tapatalk 4
Well selling for Parts... Im guessing it could also be a hardware error...
Sent from my HTC Sensation using Tapatalk 4
Are you on JB 4.1.2 on the Claro PR rom? By OTA or was it preinstalled? Give me those details and I can see if the tutorial that I used to unbrick mine can be used on yours (I too have an RAZR HD from claro and it got bricked about a month ago). Here I'm gonna add the attachment that contains the tutorial and the builds neccessary for the RAZR HD on claro (4.1.2 jb)
Sent from my XT925 using xda app-developers app
Thanks for that. I downloaded both builds and tried both. Neither say anything about downgrading so I'm guessing it had 4.0.4 but tried the update and it wouldn't write it to phone. It transfers but can't write it. Which makes me think it has a damaged emmc... Ala mytouch 4g...
I have the correct drivers and know how to use rsdlite and fastboot.
Sent from my HTC Sensation using Tapatalk 4
Sorry for the late answer. Hmmm, if you are on 4.0.4 then the tutorial won't work as it is only made for RAZR HD from Claro PR on 4.1.2 jb. Otherwise it suppose to work without any problem, my RAZR HD was bricked last month and it didn't pass through the AP fastboot menu and said fastboot reason: flash failed. Tried the tutorial above and worked again. You need to ensure you are doing everything correctly, also the part of removing the "getvar" lines from the XML is really important. Hope this solves your problem, otherwise you will have to take it to someone who knows or keep searching. Sorry if im not able to help you more, Im new to android, there is little I know about this OS
Sent from my XT925 using xda app-developers app
I did try it. I removed the getvar line... I tried a couple other things too... But nothing. Thanks though. I returned the phone to its previous owner.
Sent from my HTC Sensation using Tapatalk 4
Hello Fellows, I have a similar story
(still stucked)
The phone is Motorola Razr XT925 (Vanquish, NOT Droid)
Atacched to Telcel Mexico with Firmware Jelly Bean 9.8.2Q-50-XT925_VQLM-21
After a random reboot the phone asks for the password to decrypt the storage
the storage is not encrypted, may be is corrupted.
I erase the cache with the recovery mode boot, not work
Tried to install these firmwares, none works:
Original telcel:
jelly 9.8.2Q-50-XT925_VQLM-21_AmericaMovil_MX_SIGNED_S12_USAVANQUTELMXLA020.0R_VANQJBTELMXLA_P009_A013_S1FF_v2_CFCv2_fb.xml
Iceream telcel:
icecream 7.7.1Q-144_VQL_S3-58_AmericaMovil_MX_SIGNLATAMUnlk_USAVANQUTELMXLA014.0R_VANQUISHTELMXLA_P046_A060_CFC_fastboot_v2.xml.zip
Brazil reteal jelly
brazl jelly 9.8.2Q-8-XT925_VQL-6_Retail_BR_SIGNED_S12_USAVANQURETBRLA019.0R_CFC_fb.xml
Puerto Rico Claro (VQLM-24 may be a newer version than VQLM-21)
PR jelly24 9.8.2Q-50-XT925_VQLM-24_AmericaMovil_PR_SIGNED_S12_USAVANQUCLAPRLA020.0R_VANQJBCLAPRLA_P008_A010_S1FF_CFC_fb.xml
Tried with RSD lite 6.1.5 and fastboot (SDK android)
I unlock the boot loader using motorola.com
but was impossible to install any firmware, with RSDlite or fastboot, the phone returns several errors:
Code:
(bootloader) Failed to program partition table
FAILED (remote failure)
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
And in the screen of the phone says: "Update gpt_main version failed"
Also I have
Code:
C:\Users\ERASMO\Downloads\razr\platform-tools>fastboot erase cache
(bootloader) Variable not supported!
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.047s
I think is problem is the GPT partition table currupted, may be only in software, or may be the memory chip have a physical damage
here is the full log of fastboot when i tried to flash flash_fastboot_erase_userdata.bat:
Code:
Flashing bootloader images ...
So as to use latest flash capabilities
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'partition' (32 KB)...
OKAY [ 0.020s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.332s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl1' (101 KB)...
OKAY [ 0.026s]
writing 'sbl1'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl1
FAILED (remote failure)
finished. total time: 0.150s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl2' (127 KB)...
OKAY [ 0.027s]
writing 'sbl2'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl2
FAILED (remote failure)
finished. total time: 0.151s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl3' (512 KB)...
OKAY [ 0.054s]
writing 'sbl3'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl3
FAILED (remote failure)
finished. total time: 0.343s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'rpm' (140 KB)...
OKAY [ 0.029s]
writing 'rpm'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition rpm
FAILED (remote failure)
finished. total time: 0.305s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'tz' (192 KB)...
OKAY [ 0.032s]
writing 'tz'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition tz
FAILED (remote failure)
finished. total time: 0.303s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'aboot' (256 KB)...
OKAY [ 0.036s]
writing 'aboot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition aboot
FAILED (remote failure)
finished. total time: 0.315s
Flashing modem SW...
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
sending sparse 'modem' (30696 KB)...
OKAY [ 2.389s]
writing 'modem'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 2.517s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'fsg' (2852 KB)...
OKAY [ 0.230s]
writing 'fsg'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition fsg
FAILED (remote failure)
finished. total time: 0.359s
(bootloader) Variable not supported!
erasing 'modemst1'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
(bootloader) Variable not supported!
erasing 'modemst2'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
Flashing AP Images...
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'logo' (1709 KB)...
OKAY [ 0.143s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 0.272s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'boot' (10240 KB)...
OKAY [ 0.784s]
writing 'boot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition boot
FAILED (remote failure)
finished. total time: 0.912s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (10240 KB)...
OKAY [ 0.785s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 0.916s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'devtree' (512 KB)...
OKAY [ 0.055s]
writing 'devtree'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition devtree
FAILED (remote failure)
finished. total time: 0.190s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 733650364 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 704499132 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 673045948 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 641588668 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 610135484 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 578682300 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 548453820 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 516865468 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 485408188 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 453942716 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 422305212 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 390852028 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 359398844 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 327945660 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297762236 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266309052 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 234835388 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 203361724 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 171908540 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 140811708 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 110251452 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 78798268 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 46755260 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 15302076 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
OKAY [ 2.404s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 2.544s
(bootloader) Variable not supported!
erasing 'tombstones'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
sending sparse 'cdrom' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
OKAY [ 29.321s]
writing 'cdrom'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 29.457s
(bootloader) Variable not supported!
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.054s
Erasing userdata...
(bootloader) Variable not supported!
erasing 'userdata'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
All images flashed. Check logs for errors!
Press any key to continue . . .
You need to look for your firmware on droid Sbf developers website, download RSD Lite 6.1.4, and flash the firmware through AP fastboot using RSD Lite
Sent from my XT925 using xda app-developers app
---------- Post added at 04:09 AM ---------- Previous post was at 04:06 AM ----------
Firmwares site: http://sbf.droid-developers.org/
Tutorial: http://www.android.gs/unroot-droid-razr-hd-xt926-downgrade-stock-firmware/
(Don't download the firmware on the tutorial, just follow the instructions accordingly with your firmware from Telcel and the phone flash should do fine)
Sent from my XT925 using xda app-developers app
---------- Post added at 04:12 AM ---------- Previous post was at 04:09 AM ----------
Btw: you can download RSD lite from the site tutorial, look at the the instructions, the link will be attached in one of them.
Sent from my XT925 using xda app-developers app
---------- Post added at 04:15 AM ---------- Previous post was at 04:12 AM ----------
Your problem is very strange but something like this happened to me and I fixed it by flashing with RSD 6.1.4 instead of 6.1.5, don't know how but it worked.
Sent from my XT925 using xda app-developers app
Broken
I take the phone to the authorized motorola service. They told me, the memory chip is damaged. The only solution is a new mother board == a new phone.
what I can do with the phone?
Buy a new motherboard (too expensive, or difficult to find another used in my area)
A nice paperweight
Sell for pieces
Throw to someone
Luis_Erasmo said:
Hello Fellows, I have a similar story
(still stucked)
The phone is Motorola Razr XT925 (Vanquish, NOT Droid)
Atacched to Telcel Mexico with Firmware Jelly Bean 9.8.2Q-50-XT925_VQLM-21
After a random reboot the phone asks for the password to decrypt the storage
the storage is not encrypted, may be is corrupted.
I erase the cache with the recovery mode boot, not work
Tried to install these firmwares, none works:
Original telcel:
jelly 9.8.2Q-50-XT925_VQLM-21_AmericaMovil_MX_SIGNED_S12_USAVANQUTELMXLA020.0R_VANQJBTELMXLA_P009_A013_S1FF_v2_CFCv2_fb.xml
Iceream telcel:
icecream 7.7.1Q-144_VQL_S3-58_AmericaMovil_MX_SIGNLATAMUnlk_USAVANQUTELMXLA014.0R_VANQUISHTELMXLA_P046_A060_CFC_fastboot_v2.xml.zip
Brazil reteal jelly
brazl jelly 9.8.2Q-8-XT925_VQL-6_Retail_BR_SIGNED_S12_USAVANQURETBRLA019.0R_CFC_fb.xml
Puerto Rico Claro (VQLM-24 may be a newer version than VQLM-21)
PR jelly24 9.8.2Q-50-XT925_VQLM-24_AmericaMovil_PR_SIGNED_S12_USAVANQUCLAPRLA020.0R_VANQJBCLAPRLA_P008_A010_S1FF_CFC_fb.xml
Tried with RSD lite 6.1.5 and fastboot (SDK android)
I unlock the boot loader using motorola.com
but was impossible to install any firmware, with RSDlite or fastboot, the phone returns several errors:
Code:
(bootloader) Failed to program partition table
FAILED (remote failure)
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
And in the screen of the phone says: "Update gpt_main version failed"
Also I have
Code:
C:\Users\ERASMO\Downloads\razr\platform-tools>fastboot erase cache
(bootloader) Variable not supported!
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.047s
I think is problem is the GPT partition table currupted, may be only in software, or may be the memory chip have a physical damage
here is the full log of fastboot when i tried to flash flash_fastboot_erase_userdata.bat:
Code:
Flashing bootloader images ...
So as to use latest flash capabilities
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'partition' (32 KB)...
OKAY [ 0.020s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.332s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl1' (101 KB)...
OKAY [ 0.026s]
writing 'sbl1'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl1
FAILED (remote failure)
finished. total time: 0.150s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl2' (127 KB)...
OKAY [ 0.027s]
writing 'sbl2'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl2
FAILED (remote failure)
finished. total time: 0.151s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl3' (512 KB)...
OKAY [ 0.054s]
writing 'sbl3'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl3
FAILED (remote failure)
finished. total time: 0.343s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'rpm' (140 KB)...
OKAY [ 0.029s]
writing 'rpm'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition rpm
FAILED (remote failure)
finished. total time: 0.305s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'tz' (192 KB)...
OKAY [ 0.032s]
writing 'tz'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition tz
FAILED (remote failure)
finished. total time: 0.303s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'aboot' (256 KB)...
OKAY [ 0.036s]
writing 'aboot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition aboot
FAILED (remote failure)
finished. total time: 0.315s
Flashing modem SW...
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
sending sparse 'modem' (30696 KB)...
OKAY [ 2.389s]
writing 'modem'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 2.517s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'fsg' (2852 KB)...
OKAY [ 0.230s]
writing 'fsg'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition fsg
FAILED (remote failure)
finished. total time: 0.359s
(bootloader) Variable not supported!
erasing 'modemst1'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
(bootloader) Variable not supported!
erasing 'modemst2'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
Flashing AP Images...
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'logo' (1709 KB)...
OKAY [ 0.143s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 0.272s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'boot' (10240 KB)...
OKAY [ 0.784s]
writing 'boot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition boot
FAILED (remote failure)
finished. total time: 0.912s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (10240 KB)...
OKAY [ 0.785s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 0.916s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'devtree' (512 KB)...
OKAY [ 0.055s]
writing 'devtree'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition devtree
FAILED (remote failure)
finished. total time: 0.190s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 733650364 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 704499132 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 673045948 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 641588668 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 610135484 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 578682300 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 548453820 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 516865468 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 485408188 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 453942716 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 422305212 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 390852028 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 359398844 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 327945660 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297762236 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266309052 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 234835388 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 203361724 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 171908540 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 140811708 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 110251452 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 78798268 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 46755260 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 15302076 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
OKAY [ 2.404s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 2.544s
(bootloader) Variable not supported!
erasing 'tombstones'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
sending sparse 'cdrom' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
OKAY [ 29.321s]
writing 'cdrom'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 29.457s
(bootloader) Variable not supported!
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.054s
Erasing userdata...
(bootloader) Variable not supported!
erasing 'userdata'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
All images flashed. Check logs for errors!
Press any key to continue . . .
Click to expand...
Click to collapse
Hello all
Since nobody helped me with my mate 9, which did no sign of life, i started searching...on the mainboard.
I found the tespoint that gave me access to board, loaded fastboot in the ram, and now my MATE 9 shows in the fastboot devices.
This, i think ,is a big step for MATE 9 phones, which we might brick.
OK, so here is what i need. If it work, i promise that in maximum 1 day after testing this, i will post a guide for unbrick.
Code:
C:\Users\MONSTER>fastboot flash boot F:\dload\BOOT.img
target reported max download size of 471859200 bytes
sending 'boot' (16208 KB)...
OKAY [ 0.549s]
writing 'boot'...
FAILED (remote: flash write prim vrl failure)
finished. total time: 0.680s
This is the error style i got,when flashing boot,recovery,fastboot,and others.
Flashing system,product,vendor,vector, works.
As @Tkkg1994 posted here, https://forum.xda-developers.com/showpost.php?p=70410219&postcount=454
vrl.img really exists (i never heard of,and firstly,i thought that is URL.img ) )and may have something to do with partition table or smth like that.
I would need as many as partitions possible, since i have only those extracted from update.app.
So,please,anyone, if have time,try to help.
PS: @duraaraa - sir, i'm disturbing you again. but again,i think you can help.
What do you need, and how to help you?
Gesendet von meinem MHA-L29 mit Tapatalk
i need those img's
verlist.img
vrl.img
vrl_backup.img
dts.img
dtx.img
version.img
isp_boot.img
patch.img
persist.img
secure_storage.img
splash2.img
But i admit,that i have no idea how to get them from a working phone.Maybe others can help here.
I also have no idea how @Tkkg1994 obtained this partition list.
Hmm, the some are included in update.app , which can be extracted. But this is a basic thing you already know.
Indeed the most are not in updated.app like vrl.img dtx, version, isp, pathch persist etc. Maybe they are temporary build during update process.
well...with those in update.app already tried,they solve nothing,even if flashing is ok.
something is missing...
and btw....who seen before this error?
flash write prim vrl failure
Monster.Kali said:
I would need as many as partitions possible, since i have only those extracted from update.app.
Click to expand...
Click to collapse
You should have a clear understanding what is the purpose of these partitions, and how they are used.
If you are loading code into RAM directly (over debug UART or whatever), then it is possible to load Linux kernel (zImage)
with any custom ramdisk (+busybox). At this point "fastboot" is completely redundant, because flashing can be
done by 'cat foo.img > /dev/sdcNN'.
user4774 said:
You should have a clear understanding what is the purpose of these partitions, and how they are used.
If you are loading code into RAM directly (over debug UART or whatever), then it is possible to load Linux kernel (zImage)
with any custom ramdisk (+busybox). At this point "fastboot" is completely redundant, because flashing can be
done by 'cat foo.img > /dev/sdcNN'.
Click to expand...
Click to collapse
well, i don't have that clear understanding. i'm a noob.
imagine that at work, (gsm repair shop)i'm helped by software and hardware tools.
i never did that before,to load something into ram for x reason.
so right now, i try to learn things, and to bring my phone back to life.
what i tried to do,was like that. if i broke internal partitions,that after restart killed my phone, now i'm trying to get them back,maybe they solve something.
in ram, i loaded fastboot image and xloader.
that gave me access to fastboot.
until some clear instructions, i keep trying.
Monster.Kali said:
now i'm trying to get them back,maybe they solve something.
Click to expand...
Click to collapse
vrl and vrl_backup are first 2 partitions on /dev/sdd (/dev/block/sdd1 and /dev/block/sdd2)
Code:
Number Start (sector) End (sector) Size Name
1 128 255 512K vrl
2 256 383 512K vrl_backup
I have dumped them to the SD card with 'cat /dev/block/sdd1 > /storage/sdcard1/D1' and 'cat /dev/block/sdd2 > /storage/sdcard1/D2'
The contents seems to be identical
Code:
# md5sum /storage/sdcard1/D1
06da2cbdf74659d24430114c104e08b8 /storage/sdcard1/D1
# md5sum /storage/sdcard1/D2
06da2cbdf74659d24430114c104e08b8 /storage/sdcard1/D2
fastboot (aka bootloader) is the partition /dev/sdd24
Code:
24 151552 154623 12.0M fastboot_a
and the xloader is on a different 4MB "disk" /dev/sda
Code:
# fdisk -l /dev/block/sda
Note: sector size is 4096 (not 512)
Disk /dev/block/sda: 4 MB, 4194304 bytes, 8192 sectors
128 cylinders, 1 heads, 8 sectors/track
Units: cylinders of 8 * 4096 = 32768 bytes
Disk /dev/block/sda doesn't contain a valid partition table
user4774 said:
vrl and vrl_backup are first 2 partitions on /dev/sdd (/dev/block/sdd1 and /dev/block/sdd2)
Code:
Number Start (sector) End (sector) Size Name
1 128 255 512K vrl
2 256 383 512K vrl_backup
I have dumped them to the SD card with 'cat /dev/block/sdd1 > /storage/sdcard1/D1' and 'cat /dev/block/sdd2 > /storage/sdcard1/D2'
The contents seems to be identical
Code:
# md5sum /storage/sdcard1/NEW/D1
06da2cbdf74659d24430114c104e08b8 /storage/sdcard1/D1
# md5sum /storage/sdcard1/NEW/D2
06da2cbdf74659d24430114c104e08b8 /storage/sdcard1/D2
Click to expand...
Click to collapse
that's good.
it would be easier to do what i want, with cat, as you said.
i would follow partitions profile by tkkg1994, and write them to emmc.
but since i have only fastboot.....
Monster.Kali said:
but since i have only fastboot.....
Click to expand...
Click to collapse
Check which partitions you can extract from the full ROM/UPDATE.APP.
For your reference, my MHAL29C432 has 4 "scsi" disks /dev/sda (4MB xloader), /dev/sdb (4MB unused), /dev/sdc (frp stuff)
Code:
# fdisk -l /dev/block/sdc
Note: sector size is 4096 (not 512)
Found valid GPT with protective MBR; using GPT
Disk /dev/block/sdc: 16384 sectors, 64.0M
Logical sector size: 4096
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 2047
Number Start (sector) End (sector) Size Name
1 128 255 512K frp
2 256 767 2048K persist
3 768 2047 5120K reserved1
and /dev/sdd
Code:
# fdisk -l /dev/block/sdd
Note: sector size is 4096 (not 512)
Found valid GPT with protective MBR; using GPT
Disk /dev/block/sdd: 124928000 sectors, 576M
Logical sector size: 4096
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 15615999
Number Start (sector) End (sector) Size Name
1 128 255 512K vrl
2 256 383 512K vrl_backup
3 384 2559 8704K modem_secure
4 2560 4095 6144K nvme
5 4096 20479 64.0M oeminfo
6 20480 28671 32.0M secure_storage
7 28672 36863 32.0M modem_om
8 36864 37887 4096K modemnvm_factory
9 37888 38911 4096K modemnvm_backup
10 38912 41983 12.0M modemnvm_img
11 41984 43007 4096K modemnvm_system
12 43008 63487 80.0M splash2
13 63488 129023 256M cache
14 129024 129535 2048K bootfail_info
15 129536 130047 2048K misc
16 130048 138239 32.0M reserved2
17 138240 139263 4096K reserved10
18 139264 141311 8192K hisee_fs
19 141312 145407 16.0M dfx
20 145408 149503 16.0M rrecord
21 149504 149567 256K fw_lpm3_a
22 149568 150527 3840K reserved3_a
23 150528 151551 4096K hisee_img_a
24 151552 154623 12.0M fastboot_a
25 154624 155647 4096K vector_a
26 155648 156159 2048K isp_boot_a
27 156160 159743 14.0M isp_firmware_a
28 159744 162815 12.0M fw_hifi_a
29 162816 164863 8192K teeos_a
30 164864 181247 64.0M recovery2_a
31 181248 185343 16.0M sensorhub_a
32 185344 193535 32.0M boot_a
33 193536 209919 64.0M recovery_a
34 209920 214015 16.0M dts_a
35 214016 214527 2048K trustfirmware_a
36 214528 228863 56.0M modem_fw_a
37 228864 241663 50.0M reserved4_a
38 241664 262143 80.0M modemnvm_update_a
39 262144 270335 32.0M patch_a
40 270336 278527 32.0M version_a
41 278528 479231 784M vendor_a
42 479232 528383 192M product_a
43 528384 577535 192M cust_a
44 577536 1777663 4688M system_a
45 1777664 1810431 128M reserved5
46 1810432 15615999 52.6G userdata
ok
got all missing img files from update.app with 7zip, not with update extractor.
on some of them, i have different sizes
here is the log of fastboot.
many of them flashed ok.
some not.
Code:
C:\Users\MONSTER>fastboot flash hisee_fs F:\dload\UPDATE\hisee_fs.img
target reported max download size of 471859200 bytes
sending 'hisee_fs' (8192 KB)...
OKAY [ 0.288s]
writing 'hisee_fs'...
OKAY [ 0.092s]
finished. total time: 0.386s
C:\Users\MONSTER>fastboot flash dfx F:\dload\UPDATE\dfx.img
target reported max download size of 471859200 bytes
sending 'dfx' (16384 KB)...
OKAY [ 0.561s]
writing 'dfx'...
OKAY [ 0.161s]
finished. total time: 0.728s
C:\Users\MONSTER>fastboot flash rrecord F:\dload\UPDATE\rrecord.img
target reported max download size of 471859200 bytes
sending 'rrecord' (16384 KB)...
OKAY [ 0.562s]
writing 'rrecord'...
OKAY [ 0.157s]
finished. total time: 0.725s
C:\Users\MONSTER>fastboot flash fw_lpm3_a F:\dload\UPDATE\fw_lpm3_a.img
target reported max download size of 471859200 bytes
sending 'fw_lpm3_a' (256 KB)...
OKAY [ 0.017s]
writing 'fw_lpm3_a'...
FAILED (remote: image verification error)
finished. total time: 0.061s
C:\Users\MONSTER>fastboot flash fw_lpm3 F:\dload\UPDATE\fw_lpm3_a.img
target reported max download size of 471859200 bytes
sending 'fw_lpm3' (256 KB)...
OKAY [ 0.015s]
writing 'fw_lpm3'...
FAILED (remote: image verification error)
finished. total time: 0.059s
C:\Users\MONSTER>fastboot flash reserved3_a F:\dload\UPDATE\reserved3_a.img
target reported max download size of 471859200 bytes
sending 'reserved3_a' (3840 KB)...
OKAY [ 0.136s]
writing 'reserved3_a'...
OKAY [ 0.056s]
finished. total time: 0.198s
C:\Users\MONSTER>fastboot flash hisee_img_a F:\dload\UPDATE\hisee_img_a.img
target reported max download size of 471859200 bytes
sending 'hisee_img_a' (4096 KB)...
OKAY [ 0.141s]
writing 'hisee_img_a'...
OKAY [ 0.058s]
finished. total time: 0.205s
C:\Users\MONSTER>fastboot flash fastboot_a F:\dload\UPDATE\fastboot_a.img
target reported max download size of 471859200 bytes
sending 'fastboot_a' (12288 KB)...
OKAY [ 0.423s]
writing 'fastboot_a'...
FAILED (remote: image verification error)
finished. total time: 0.466s
C:\Users\MONSTER>fastboot flash vector_a F:\dload\UPDATE\vector_a.img
target reported max download size of 471859200 bytes
sending 'vector_a' (4096 KB)...
OKAY [ 0.145s]
writing 'vector_a'...
FAILED (remote: image verification error)
finished. total time: 0.189s
C:\Users\MONSTER>fastboot flash vector F:\dload\UPDATE\vector_a.img
target reported max download size of 471859200 bytes
sending 'vector' (4096 KB)...
OKAY [ 0.145s]
writing 'vector'...
FAILED (remote: image verification error)
finished. total time: 0.189s
C:\Users\MONSTER>fastboot flash isp_boot_a F:\dload\UPDATE\isp_boot_a.img
target reported max download size of 471859200 bytes
sending 'isp_boot_a' (2048 KB)...
OKAY [ 0.074s]
writing 'isp_boot_a'...
OKAY [ 0.055s]
finished. total time: 0.135s
C:\Users\MONSTER>fastboot flash isp_firmware_a F:\dload\UPDATE\isp_firmware_a.im
g
target reported max download size of 471859200 bytes
sending 'isp_firmware_a' (14336 KB)...
OKAY [ 0.494s]
writing 'isp_firmware_a'...
FAILED (remote: image verification error)
finished. total time: 0.539s
C:\Users\MONSTER>fastboot flash fw_hifi_a F:\dload\UPDATE\fw_hifi_a.img
target reported max download size of 471859200 bytes
sending 'fw_hifi_a' (12288 KB)...
OKAY [ 0.424s]
writing 'fw_hifi_a'...
FAILED (remote: image verification error)
finished. total time: 0.467s
C:\Users\MONSTER>fastboot flash teeos_a F:\dload\UPDATE\teeos_a.img
target reported max download size of 471859200 bytes
sending 'teeos_a' (8192 KB)...
OKAY [ 0.286s]
writing 'teeos_a'...
FAILED (remote: image verification error)
finished. total time: 0.329s
C:\Users\MONSTER>fastboot flash recovery2_a F:\dload\UPDATE\recovery2_a.img
target reported max download size of 471859200 bytes
sending 'recovery2_a' (65536 KB)...
OKAY [ 2.230s]
writing 'recovery2_a'...
FAILED (remote: image verification error)
finished. total time: 2.273s
C:\Users\MONSTER>fastboot flash dts_a F:\dload\UPDATE\dts_a.img
target reported max download size of 471859200 bytes
sending 'dts_a' (16384 KB)...
OKAY [ 0.562s]
writing 'dts_a'...
FAILED (remote: image verification error)
finished. total time: 0.603s
C:\Users\MONSTER>fastboot flash trustfirmware_a F:\dload\UPDATE\trustfirmware_a.
img
target reported max download size of 471859200 bytes
sending 'trustfirmware_a' (2048 KB)...
OKAY [ 0.077s]
writing 'trustfirmware_a'...
FAILED (remote: image verification error)
finished. total time: 0.123s
C:\Users\MONSTER>fastboot flash modem_fw_a F:\dload\UPDATE\modem_fw_a.img
target reported max download size of 471859200 bytes
sending 'modem_fw_a' (57344 KB)...
OKAY [ 1.943s]
writing 'modem_fw_a'...
FAILED (remote: image verification error)
finished. total time: 1.988s
C:\Users\MONSTER>fastboot flash reserved4_a F:\dload\UPDATE\reserved4_a.img
target reported max download size of 471859200 bytes
sending 'reserved4_a' (51200 KB)...
OKAY [ 1.743s]
writing 'reserved4_a'...
OKAY [ 0.413s]
finished. total time: 2.162s
C:\Users\MONSTER>fastboot flash modemnvm_update_a F:\dload\UPDATE\modemnvm_updat
e_a.img
target reported max download size of 471859200 bytes
sending 'modemnvm_update_a' (81920 KB)...
OKAY [ 2.762s]
writing 'modemnvm_update_a'...
OKAY [ 0.648s]
finished. total time: 3.416s
C:\Users\MONSTER>fastboot flash patch_a F:\dload\UPDATE\patch_a.img
target reported max download size of 471859200 bytes
sending 'patch_a' (32768 KB)...
OKAY [ 1.117s]
writing 'patch_a'...
OKAY [ 0.275s]
finished. total time: 1.398s
C:\Users\MONSTER>fastboot flash version_a F:\dload\UPDATE\version_a.img F:\dload
\UPDATE\version_a.img
target reported max download size of 471859200 bytes
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if fou
nd,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
flashing lock locks the device. Prevents flashing
partitions
flashing unlock unlocks the device. Allows user to
flash any partition except the ones
that are related to bootloader
flashing lock_critical Prevents flashing bootloader related
partitions
flashing unlock_critical Enables flashing bootloader related
partitions
flashing get_unlock_ability Queries bootloader to see if the
device is unlocked
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot [bootloader] reboot device, optionally into bootlo
ader
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
C:\Users\MONSTER>fastboot flash vendor_a F:\dload\UPDATE\vendor_a.img
target reported max download size of 471859200 bytes
Invalid sparse file format at header magi
sending sparse 'vendor_a' (460726 KB)...
OKAY [ 16.785s]
writing 'vendor_a'...
OKAY [ 4.661s]
sending sparse 'vendor_a' (340470 KB)...
OKAY [ 12.505s]
writing 'vendor_a'...
OKAY [ 3.312s]
finished. total time: 37.272s
C:\Users\MONSTER>fastboot flash product_a F:\dload\UPDATE\product_a.img
target reported max download size of 471859200 bytes
sending 'product_a' (196608 KB)...
OKAY [ 6.675s]
writing 'product_a'...
OKAY [ 1.536s]
finished. total time: 8.218s
C:\Users\MONSTER>fastboot flash cust_a F:\dload\UPDATE\cust_a.img
target reported max download size of 471859200 bytes
sending 'cust_a' (196608 KB)...
OKAY [ 6.705s]
writing 'cust_a'...
OKAY [ 1.507s]
finished. total time: 8.218s
C:\Users\MONSTER>fastboot flash system_a F:\dload\UPDATE\system_a.img
target reported max download size of 471859200 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 1070983688 is not a multiple of
the block size 4096
error: write_sparse_skip_chunk: don't care size 593316360 is not a multiple of t
he block size 4096
error: write_sparse_skip_chunk: don't care size 112839176 is not a multiple of t
he block size 4096
sending sparse 'system_a' (457291 KB)...
error: write_sparse_skip_chunk: don't care size 1070983688 is not a multiple of
the block size 4096
error: write_sparse_skip_chunk: don't care size 1070983688 is not a multiple of
the block size 4096
OKAY [ 16.816s]
writing 'system_a'...
FAILED (remote: sparse flash write failure)
finished. total time: 22.552s
C:\Users\MONSTER>fastboot flash frp F:\dload\UPDATE\frp.img
target reported max download size of 471859200 bytes
sending 'frp' (512 KB)...
OKAY [ 0.025s]
writing 'frp'...
OKAY [ 0.022s]
finished. total time: 0.052s
C:\Users\MONSTER>fastboot flash persist F:\dload\UPDATE\persist.img
target reported max download size of 471859200 bytes
sending 'persist' (2048 KB)...
OKAY [ 0.075s]
writing 'persist'...
FAILED (remote: partition length get error)
finished. total time: 0.093s
C:\Users\MONSTER>fastboot flash reserved1 F:\dload\UPDATE\reserved1.img
target reported max download size of 471859200 bytes
sending 'reserved1' (5120 KB)...
OKAY [ 0.182s]
writing 'reserved1'...
FAILED (remote: partition length get error)
finished. total time: 0.204s
C:\Users\MONSTER>fastboot reboot
any idea of some img to load into ram?
or is there a method, that, allows me to flash files on emmc, over serial port?
i mean, serial port allows me to load them into ram.
but i wonder if it's capable to see the emmc.
@user4774 - i noticed that, flashing img's in the order that you gave me, beginning with vrl and vrl_backup, the write prim vrl failed error is gone.
so all of them,in that log,are flashed in order.
@ajsmsg78 - sir, i saw your no force encription boot image, and wanted to ask if you could help me with some file to load into ram, but which is capable to accept some others commands, excluding fastboot
Hello
I would like to return my HTC one mini to factory firmware. After much searching, I found and downloaded this:
https://www.androidfilehost.com/?w=files&flid=29622
PO58IMG_M4_UL_K44_SENSE60_MR_HTC_Europe_4.14.401.2_Radio_1.28.40e.00.24_10.z19.40.1304L_release_450912_combined_signed.zip
I checked my device version:
$ Fastboot getvar version-main
version-main: 4.14.401.2
finished. total time: 0.006s
I tried this:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
target reported max download size of 800227328 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 300873309 is not a multiple of the block size 4096
sending sparse 'zip' 1/2 (781468 KB)...
error: write_sparse_skip_chunk: don't care size 300873309 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 300873309 is not a multiple of the block size 4096
OKAY [ 39.015s]
writing 'zip' 1/2...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 128.246s
The bootloader is relocked.
What could be the problem?
P.S. I cannot open the zip file in Windows. It says it is invalid. Could be corrupt?
Hmm... I think that a Relocked bootloader is the problem. By the way did you try flashing the RUU trough TWRP?
Hi,
my HTC ONE MINI just reboots into bootloader. Everytime i start it it boots itself into bootloader. As long i tried to flash the Stock Rom, the Stock Recovery and the TWRP Recovery but everytime it end up into an ERROR. I also tried to unlock the bootloader but it dont work it worked as long i tried to flash the unlock_code.bin. It does everything but then nothing happens.
Informations:
What shows up in my bootloader:
Code:
***LOCKED***
M4_UL PVT SHIP S-ON RL
HBOOT-2.22.0000
OS-4.14.401.2
eMMC-boot 1024MB
'The Date(Wrong ;)
the usual stuff (the red fastboot Font, Bootloader, Reboot, Reboot Bootloader, Power Down )
Thats the result when i try to flash the stock ROM.
Code:
C:\Users\#####\Desktop\Flashable>fastboot flash zip PN07IMG_M7_UL_L50_SENSE60_MR_HTC_Europe_7.19.401.2_Radio_4T.35.3218.16_10.33Q.1718.01L_release_421790_signed.zip
< waiting for any device >
target reported max download size of 800227328 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 876696571 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 76395515 is not a multiple of the block size 4096
sending sparse 'zip' 1/3 (781468 KB)...
error: write_sparse_skip_chunk: don't care size 876696571 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 876696571 is not a multiple of the block size 4096
OKAY [ 31.948s]
writing 'zip' 1/3...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 131.591s
When i try to flash the stock recovery:
Code:
C:\Users\####\Desktop\#######>fastboot flash recovery M4_UL_Stock_Recovery_4.14.401.1.img
target reported max download size of 800227328 bytes
sending 'recovery' (11410 KB)...
OKAY [ 1.425s]
writing 'recovery'...
(bootloader) signature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.529s
When i try to flash the TWRP Recovery
Code:
C:\Users\Fabian\Desktop\handy anna>fastboot flash recovery twrp-2.8.7.0-m4.img
< waiting for any device >
target reported max download size of 800227328 bytes
sending 'recovery' (11460 KB)...
OKAY [ 1.494s]
writing 'recovery'...
FAILED (remote: no transfered data)
finished. total time: 1.685s
thank you for your proposals
Hi guys,
I have problem with my rooted Xperia E C1505 with unlocked bootloader. I'm trying to flash system but it always end with error.
What I tried:
Code:
fastboot flash system system.img
Ends up with:
Code:
target didn't report max-download-size
sending 'system' (208764 KB)...
FAILED (remote: Download size too large)
finished. total time: 0.008s
So I tried to flash it in multiple parts:
Code:
fastboot -S 128M flash system system.img
And got stuck with this message:
Code:
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 79560896 is not a multiple of the block size 4096
sending sparse 'system' 1/2 (131068 KB)...
error: write_sparse_skip_chunk: don't care size 79560896 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 79560896 is not a multiple of the block size 4096
(bootloader) USB download speed was 20194kB/s
OKAY [ 6.708s]
writing 'system' 1/2...
(bootloader) Flash of partition 'system' requested
(bootloader) S1 partID 0x00000004, block 0x00033000-0x00177fff
(bootloader) Unsupported chunk type: 0x0
At this point flashing stuck.
I don't know what to do with it because flashing boot/userdata works great, erasing partitions doesn't help and another threads on this subject also doesn't help me a lot.
Maybe could be helpful that
Code:
fastboot getvar all
returns nothing.
I also tried to change USB cable but it doesn't seem like this is the problem.
Thanks for any help