im new to the Motorola razr hd. I have an XT925 from Claro PR
I downloaded two of claro firmware images and neither want to flash. I know how to use fastboot and rsdlite is not complicated, it seems to be the phones partition or something along those lines.
the phone itself boots up but im greeted to a screen saying "encryption unsuccessful" and gives an option to reset or factory reset the phone. if you hit it it does nothing.
I tried a hard reset on recovery and it seems like it works but it says afterwards that it cant mount cache/recovery/log or something like it. and upon boot it stays the same.
tried flashing through fastboot and mfastboot. bootloader is locked and it cant be unlocked...
what else can be done. errors say FAILED (remote failure)
Code:
Flashing bootloader images ...
So as to use latest flash capabilities
sending 'partition' (32 KB)...
OKAY [ 0.530s]
writing 'partition'...
This may take a few seconds, if a
different partition table is being
flashed since we need to backup
and restore a few partitions
Failed to program partition table
FAILED (remote failure)
finished. total time: 1.373s
sending 'sbl1' (101 KB)...
OKAY [ 0.655s]
writing 'sbl1'...
Failed to erase partition
Failed to flash partition sbl1
FAILED (remote failure)
finished. total time: 1.108s
sending 'sbl2' (127 KB)...
OKAY [ 0.562s]
writing 'sbl2'...
Failed to erase partition
Failed to flash partition sbl2
FAILED (remote failure)
finished. total time: 1.108s
sending 'sbl3' (512 KB)...
OKAY [ 0.718s]
writing 'sbl3'...
Failed to erase partition
Failed to flash partition sbl3
FAILED (remote failure)
finished. total time: 1.388s
sending 'rpm' (140 KB)...
OKAY [ 0.593s]
writing 'rpm'...
Failed to erase partition
Failed to flash partition rpm
FAILED (remote failure)
finished. total time: 1.201s
sending 'tz' (192 KB)...
OKAY [ 0.655s]
writing 'tz'...
Failed to erase partition
Failed to flash partition tz
FAILED (remote failure)
finished. total time: 1.108s
sending 'aboot' (256 KB)...
OKAY [ 0.406s]
writing 'aboot'...
Failed to erase partition
Failed to flash partition aboot
FAILED (remote failure)
finished. total time: 1.076s
Flashing modem SW...
sending 'modem' (30720 KB)...
OKAY [ 6.209s]
writing 'modem'...
Failed to erase partition
Failed to erase partition
Failed to write mmc
FAILED (remote failure)
finished. total time: 6.848s
sending 'fsg' (2852 KB)...
OKAY [ 0.952s]
writing 'fsg'...
Failed to erase partition
Failed to flash partition fsg
FAILED (remote failure)
finished. total time: 1.388s
erasing 'modemst1'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.265s
erasing 'modemst2'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.374s
Flashing AP Images...
sending 'logo' (1709 KB)...
OKAY [ 0.874s]
writing 'logo'...
Failed to erase partition
Failed to flash partition logo
FAILED (remote failure)
finished. total time: 1.373s
sending 'boot' (10240 KB)...
OKAY [ 1.810s]
writing 'boot'...
Failed to erase partition
Failed to flash partition boot
FAILED (remote failure)
finished. total time: 3.058s
sending 'recovery' (10240 KB)...
OKAY [ 2.200s]
writing 'recovery'...
Failed to erase partition
Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 3.588s
sending 'devtree' (512 KB)...
OKAY [ 0.530s]
writing 'devtree'...
Failed to erase partition
Failed to flash partition devtree
FAILED (remote failure)
finished. total time: 1.217s
sending 'system' (30720 KB)...
OKAY [ 6.178s]
writing 'system'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 8.720s
erasing 'tombstones'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.359s
sending 'cdrom' (30720 KB)...
OKAY [ 5.850s]
writing 'cdrom'...
Failed to erase partition
Failed to erase partition
Failed to write mmc
FAILED (remote failure)
finished. total time: 8.424s
erasing 'cache'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.062s
Erasing userdata...
erasing 'userdata'...
Failed to erase partition
FAILED (remote failure)
finished. total time: 0.062s
All images flashed. Check logs for errors!
Press any key to continue . . .
Also I've spent 2 days searching reading and trying different things
Sent from my HTC Sensation using Tapatalk 4
Is there something to repartition? Like a PIT file
Sent from my HTC Sensation using Tapatalk 4
ceyo14 said:
Is there something to repartition? Like a PIT file
Sent from my HTC Sensation using Tapatalk 4
Click to expand...
Click to collapse
This thread, though it may not seem related, will probably pull you through.
http://forum.xda-developers.com/showthread.php?t=2273574
I did read it but their problem was that effectively and unintentionally they were trying to downgrade...
I just get remote failure. Ive had this problem on some galaxys that was solved with a repartition.
Sent from my HTC Sensation using Tapatalk 4
Not the remote failure but the fact that it can't format because it couldn't find the partition....
Sent from my HTC Sensation using Tapatalk 4
Is there really nothing for this? No other tools or something?
No gurus here?
Sent from my HTC Sensation using Tapatalk 4
Well selling for Parts... Im guessing it could also be a hardware error...
Sent from my HTC Sensation using Tapatalk 4
Are you on JB 4.1.2 on the Claro PR rom? By OTA or was it preinstalled? Give me those details and I can see if the tutorial that I used to unbrick mine can be used on yours (I too have an RAZR HD from claro and it got bricked about a month ago). Here I'm gonna add the attachment that contains the tutorial and the builds neccessary for the RAZR HD on claro (4.1.2 jb)
Sent from my XT925 using xda app-developers app
Thanks for that. I downloaded both builds and tried both. Neither say anything about downgrading so I'm guessing it had 4.0.4 but tried the update and it wouldn't write it to phone. It transfers but can't write it. Which makes me think it has a damaged emmc... Ala mytouch 4g...
I have the correct drivers and know how to use rsdlite and fastboot.
Sent from my HTC Sensation using Tapatalk 4
Sorry for the late answer. Hmmm, if you are on 4.0.4 then the tutorial won't work as it is only made for RAZR HD from Claro PR on 4.1.2 jb. Otherwise it suppose to work without any problem, my RAZR HD was bricked last month and it didn't pass through the AP fastboot menu and said fastboot reason: flash failed. Tried the tutorial above and worked again. You need to ensure you are doing everything correctly, also the part of removing the "getvar" lines from the XML is really important. Hope this solves your problem, otherwise you will have to take it to someone who knows or keep searching. Sorry if im not able to help you more, Im new to android, there is little I know about this OS
Sent from my XT925 using xda app-developers app
I did try it. I removed the getvar line... I tried a couple other things too... But nothing. Thanks though. I returned the phone to its previous owner.
Sent from my HTC Sensation using Tapatalk 4
Hello Fellows, I have a similar story
(still stucked)
The phone is Motorola Razr XT925 (Vanquish, NOT Droid)
Atacched to Telcel Mexico with Firmware Jelly Bean 9.8.2Q-50-XT925_VQLM-21
After a random reboot the phone asks for the password to decrypt the storage
the storage is not encrypted, may be is corrupted.
I erase the cache with the recovery mode boot, not work
Tried to install these firmwares, none works:
Original telcel:
jelly 9.8.2Q-50-XT925_VQLM-21_AmericaMovil_MX_SIGNED_S12_USAVANQUTELMXLA020.0R_VANQJBTELMXLA_P009_A013_S1FF_v2_CFCv2_fb.xml
Iceream telcel:
icecream 7.7.1Q-144_VQL_S3-58_AmericaMovil_MX_SIGNLATAMUnlk_USAVANQUTELMXLA014.0R_VANQUISHTELMXLA_P046_A060_CFC_fastboot_v2.xml.zip
Brazil reteal jelly
brazl jelly 9.8.2Q-8-XT925_VQL-6_Retail_BR_SIGNED_S12_USAVANQURETBRLA019.0R_CFC_fb.xml
Puerto Rico Claro (VQLM-24 may be a newer version than VQLM-21)
PR jelly24 9.8.2Q-50-XT925_VQLM-24_AmericaMovil_PR_SIGNED_S12_USAVANQUCLAPRLA020.0R_VANQJBCLAPRLA_P008_A010_S1FF_CFC_fb.xml
Tried with RSD lite 6.1.5 and fastboot (SDK android)
I unlock the boot loader using motorola.com
but was impossible to install any firmware, with RSDlite or fastboot, the phone returns several errors:
Code:
(bootloader) Failed to program partition table
FAILED (remote failure)
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
And in the screen of the phone says: "Update gpt_main version failed"
Also I have
Code:
C:\Users\ERASMO\Downloads\razr\platform-tools>fastboot erase cache
(bootloader) Variable not supported!
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.047s
I think is problem is the GPT partition table currupted, may be only in software, or may be the memory chip have a physical damage
here is the full log of fastboot when i tried to flash flash_fastboot_erase_userdata.bat:
Code:
Flashing bootloader images ...
So as to use latest flash capabilities
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'partition' (32 KB)...
OKAY [ 0.020s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.332s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl1' (101 KB)...
OKAY [ 0.026s]
writing 'sbl1'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl1
FAILED (remote failure)
finished. total time: 0.150s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl2' (127 KB)...
OKAY [ 0.027s]
writing 'sbl2'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl2
FAILED (remote failure)
finished. total time: 0.151s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl3' (512 KB)...
OKAY [ 0.054s]
writing 'sbl3'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl3
FAILED (remote failure)
finished. total time: 0.343s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'rpm' (140 KB)...
OKAY [ 0.029s]
writing 'rpm'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition rpm
FAILED (remote failure)
finished. total time: 0.305s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'tz' (192 KB)...
OKAY [ 0.032s]
writing 'tz'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition tz
FAILED (remote failure)
finished. total time: 0.303s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'aboot' (256 KB)...
OKAY [ 0.036s]
writing 'aboot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition aboot
FAILED (remote failure)
finished. total time: 0.315s
Flashing modem SW...
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
sending sparse 'modem' (30696 KB)...
OKAY [ 2.389s]
writing 'modem'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 2.517s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'fsg' (2852 KB)...
OKAY [ 0.230s]
writing 'fsg'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition fsg
FAILED (remote failure)
finished. total time: 0.359s
(bootloader) Variable not supported!
erasing 'modemst1'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
(bootloader) Variable not supported!
erasing 'modemst2'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
Flashing AP Images...
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'logo' (1709 KB)...
OKAY [ 0.143s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 0.272s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'boot' (10240 KB)...
OKAY [ 0.784s]
writing 'boot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition boot
FAILED (remote failure)
finished. total time: 0.912s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (10240 KB)...
OKAY [ 0.785s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 0.916s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'devtree' (512 KB)...
OKAY [ 0.055s]
writing 'devtree'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition devtree
FAILED (remote failure)
finished. total time: 0.190s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 733650364 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 704499132 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 673045948 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 641588668 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 610135484 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 578682300 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 548453820 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 516865468 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 485408188 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 453942716 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 422305212 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 390852028 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 359398844 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 327945660 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297762236 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266309052 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 234835388 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 203361724 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 171908540 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 140811708 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 110251452 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 78798268 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 46755260 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 15302076 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
OKAY [ 2.404s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 2.544s
(bootloader) Variable not supported!
erasing 'tombstones'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
sending sparse 'cdrom' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
OKAY [ 29.321s]
writing 'cdrom'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 29.457s
(bootloader) Variable not supported!
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.054s
Erasing userdata...
(bootloader) Variable not supported!
erasing 'userdata'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
All images flashed. Check logs for errors!
Press any key to continue . . .
You need to look for your firmware on droid Sbf developers website, download RSD Lite 6.1.4, and flash the firmware through AP fastboot using RSD Lite
Sent from my XT925 using xda app-developers app
---------- Post added at 04:09 AM ---------- Previous post was at 04:06 AM ----------
Firmwares site: http://sbf.droid-developers.org/
Tutorial: http://www.android.gs/unroot-droid-razr-hd-xt926-downgrade-stock-firmware/
(Don't download the firmware on the tutorial, just follow the instructions accordingly with your firmware from Telcel and the phone flash should do fine)
Sent from my XT925 using xda app-developers app
---------- Post added at 04:12 AM ---------- Previous post was at 04:09 AM ----------
Btw: you can download RSD lite from the site tutorial, look at the the instructions, the link will be attached in one of them.
Sent from my XT925 using xda app-developers app
---------- Post added at 04:15 AM ---------- Previous post was at 04:12 AM ----------
Your problem is very strange but something like this happened to me and I fixed it by flashing with RSD 6.1.4 instead of 6.1.5, don't know how but it worked.
Sent from my XT925 using xda app-developers app
Broken
I take the phone to the authorized motorola service. They told me, the memory chip is damaged. The only solution is a new mother board == a new phone.
what I can do with the phone?
Buy a new motherboard (too expensive, or difficult to find another used in my area)
A nice paperweight
Sell for pieces
Throw to someone
Luis_Erasmo said:
Hello Fellows, I have a similar story
(still stucked)
The phone is Motorola Razr XT925 (Vanquish, NOT Droid)
Atacched to Telcel Mexico with Firmware Jelly Bean 9.8.2Q-50-XT925_VQLM-21
After a random reboot the phone asks for the password to decrypt the storage
the storage is not encrypted, may be is corrupted.
I erase the cache with the recovery mode boot, not work
Tried to install these firmwares, none works:
Original telcel:
jelly 9.8.2Q-50-XT925_VQLM-21_AmericaMovil_MX_SIGNED_S12_USAVANQUTELMXLA020.0R_VANQJBTELMXLA_P009_A013_S1FF_v2_CFCv2_fb.xml
Iceream telcel:
icecream 7.7.1Q-144_VQL_S3-58_AmericaMovil_MX_SIGNLATAMUnlk_USAVANQUTELMXLA014.0R_VANQUISHTELMXLA_P046_A060_CFC_fastboot_v2.xml.zip
Brazil reteal jelly
brazl jelly 9.8.2Q-8-XT925_VQL-6_Retail_BR_SIGNED_S12_USAVANQURETBRLA019.0R_CFC_fb.xml
Puerto Rico Claro (VQLM-24 may be a newer version than VQLM-21)
PR jelly24 9.8.2Q-50-XT925_VQLM-24_AmericaMovil_PR_SIGNED_S12_USAVANQUCLAPRLA020.0R_VANQJBCLAPRLA_P008_A010_S1FF_CFC_fb.xml
Tried with RSD lite 6.1.5 and fastboot (SDK android)
I unlock the boot loader using motorola.com
but was impossible to install any firmware, with RSDlite or fastboot, the phone returns several errors:
Code:
(bootloader) Failed to program partition table
FAILED (remote failure)
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
And in the screen of the phone says: "Update gpt_main version failed"
Also I have
Code:
C:\Users\ERASMO\Downloads\razr\platform-tools>fastboot erase cache
(bootloader) Variable not supported!
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.047s
I think is problem is the GPT partition table currupted, may be only in software, or may be the memory chip have a physical damage
here is the full log of fastboot when i tried to flash flash_fastboot_erase_userdata.bat:
Code:
Flashing bootloader images ...
So as to use latest flash capabilities
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'partition' (32 KB)...
OKAY [ 0.020s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.332s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl1' (101 KB)...
OKAY [ 0.026s]
writing 'sbl1'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl1
FAILED (remote failure)
finished. total time: 0.150s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl2' (127 KB)...
OKAY [ 0.027s]
writing 'sbl2'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl2
FAILED (remote failure)
finished. total time: 0.151s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'sbl3' (512 KB)...
OKAY [ 0.054s]
writing 'sbl3'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition sbl3
FAILED (remote failure)
finished. total time: 0.343s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'rpm' (140 KB)...
OKAY [ 0.029s]
writing 'rpm'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition rpm
FAILED (remote failure)
finished. total time: 0.305s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'tz' (192 KB)...
OKAY [ 0.032s]
writing 'tz'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition tz
FAILED (remote failure)
finished. total time: 0.303s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'aboot' (256 KB)...
OKAY [ 0.036s]
writing 'aboot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition aboot
FAILED (remote failure)
finished. total time: 0.315s
Flashing modem SW...
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
sending sparse 'modem' (30696 KB)...
OKAY [ 2.389s]
writing 'modem'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 2.517s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'fsg' (2852 KB)...
OKAY [ 0.230s]
writing 'fsg'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition fsg
FAILED (remote failure)
finished. total time: 0.359s
(bootloader) Variable not supported!
erasing 'modemst1'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
(bootloader) Variable not supported!
erasing 'modemst2'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
Flashing AP Images...
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'logo' (1709 KB)...
OKAY [ 0.143s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 0.272s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'boot' (10240 KB)...
OKAY [ 0.784s]
writing 'boot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition boot
FAILED (remote failure)
finished. total time: 0.912s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'recovery' (10240 KB)...
OKAY [ 0.785s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 0.916s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'devtree' (512 KB)...
OKAY [ 0.055s]
writing 'devtree'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition devtree
FAILED (remote failure)
finished. total time: 0.190s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 733650364 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 704499132 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 673045948 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 641588668 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 610135484 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 578682300 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 548453820 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 516865468 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 485408188 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 453942716 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 422305212 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 390852028 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 359398844 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 327945660 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 297762236 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 266309052 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 234835388 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 203361724 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 171908540 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 140811708 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 110251452 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 78798268 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 46755260 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 15302076 is not a multiple of the block size 4096
sending sparse 'system' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 765107644 is not a multiple of the block size 4096
OKAY [ 2.404s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 2.544s
(bootloader) Variable not supported!
erasing 'tombstones'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
sending sparse 'cdrom' (30716 KB)...
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 22923264 is not a multiple of the block size 4096
OKAY [ 29.321s]
writing 'cdrom'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 29.457s
(bootloader) Variable not supported!
erasing 'cache'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.054s
Erasing userdata...
(bootloader) Variable not supported!
erasing 'userdata'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 0.055s
All images flashed. Check logs for errors!
Press any key to continue . . .
Click to expand...
Click to collapse
Dear all,
I own a XT1541 and updated to Marhsmallow via OTA few weeks ago. I encountered some troubles with the performance. I also had the issue that a single app was attempted to be optimized on every boot. Therefore, I decided to reset it to factory settings. However, it seemed that this process failed (waited nearly for an hour to complete but nothing happened).
After rebooting then manually, I am stuck in a fastboot message
AP Fastboot Flash Mode (Secure)
failed to validate boot image
ERROR: failed to pass validation, backup to fastboot
Fastboot Reason: Fall-through from charger boot mode
CID Read Failure
Invalid CID status 0x69
I can access the device via my Linux using fastboot command. What do you propose to recover from my problem.
Thanks
IK1981 said:
Dear all,
I own a XT1541 and updated to Marhsmallow via OTA few weeks ago. I encountered some troubles with the performance. I also had the issue that a single app was attempted to be optimized on every boot. Therefore, I decided to reset it to factory settings. However, it seemed that this process failed (waited nearly for an hour to complete but nothing happened).
After rebooting then manually, I am stuck in a fastboot message
AP Fastboot Flash Mode (Secure)
failed to validate boot image
ERROR: failed to pass validation, backup to fastboot
Fastboot Reason: Fall-through from charger boot mode
CID Read Failure
Invalid CID status 0x69
I can access the device via my Linux using fastboot command. What do you propose to recover from my problem.
Thanks
Click to expand...
Click to collapse
Try flashing the factory image here are the instructions
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
bobby0724 said:
Try flashing the factory image here are the instructions
http://forum.xda-developers.com/2015-moto-g/general/guide-fastboot-flashing-factory-t3187750
Click to expand...
Click to collapse
Already tried this. Already fails at first command... When doing this for the first time, it takes up to one minute to get a response. When retrying, it fails immediately
Code:
~/Downloads/XT1541_OSPREY_RETEU_6.0_MPI24.65-33.1_cid7_subsidy-DEFAULT_CFC__v2.xml# fastboot oem fb_mode_set
...
FAILED (remote failure)
finished. total time: 55.425
Try usuing my Motorola downgrade tool , or Motorola utility , created by me , to try and fix problems like this. Links can be found in the general section of Moto g 3 forums , or in Moto g 3 devdb. Therealduff1 is the username you are looking for . I am happy to try and help you with this !
therealduff1 said:
Try usuing my Motorola downgrade tool , or Motorola utility , created by me , to try and fix problems like this. Links can be found in the general section of Moto g 3 forums , or in Moto g 3 devdb. Therealduff1 is the username you are looking for . I am happy to try and help you with this !
Click to expand...
Click to collapse
Thanks for your help. Tried it with your tool but as far as I could see I land in the same troubles.
Code:
OSPREY_RETEU_6.0_MPI24.65-33_cid7_subsidy
please move all of the firmware files into the moto toolkit directory (the same folder containing toolkit.py)
Please make sure usb debugging is turned on in developer settings, then type 'done' into this promptdone
error: device '(null)' not found
Has your device successfully loaded bootloader mode ? please type 'yes' if it has successfully loadedyes
Press enter to confirm you would like to upgrade to android marshmallow ;)
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ 0.000s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Flashing primary GPT image...
(bootloader) Failed to write primary GPT.
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 55.795s
Partition table has been flashed
target reported max download size of 268435456 bytes
sending 'bootloader' (2546 KB)...
OKAY [ 0.094s]
writing 'bootloader'...
(bootloader) flashing sbl1 ...
(bootloader) Failed to erase partition
(bootloader) Failed to flash sbl1
FAILED (remote failure)
finished. total time: 1.438s
Bootloader has been flashed
target reported max download size of 268435456 bytes
sending 'logo' (1352 KB)...
OKAY [ 0.062s]
writing 'logo'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition logo
FAILED (remote failure)
finished. total time: 0.172s
boot logo has been flashed
target reported max download size of 268435456 bytes
sending 'boot' (16384 KB)...
OKAY [ 0.530s]
writing 'boot'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition boot
FAILED (remote failure)
finished. total time: 1.093s
boot.img has been flashed
target reported max download size of 268435456 bytes
sending 'recovery' (16484 KB)...
OKAY [ 0.531s]
writing 'recovery'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition recovery
FAILED (remote failure)
finished. total time: 1.094s
Stock marshmallow recovery has now been flashed
target reported max download size of 268435456 bytes
sending 'system' (238438 KB)...
OKAY [ 7.500s]
writing 'system'...
(bootloader) Failed to erase partition
FAILED (remote failure)
finished. total time: 15.891s
System part 1 has been flashed
target reported max download size of 268435456 bytes
sending 'system' (238552 KB)...
OKAY [ 7.492s]
writing 'system'...
(bootloader) Failed to flash sparse image
FAILED (remote failure)
finished. total time: 9.608s
System part 2 has been flashed
target reported max download size of 268435456 bytes
sending 'system' (256695 KB)...
One thing that confuses me is the fact that the tool tells me that I shall turn on the USB debug mode. However, since Android does not boot any longer, I have no chance to do this in the Settings. Is there any way to enable this debug mode in another way?
OK I HAVE A MOTO G3 , SKU=XT1541 , VER=P2B , BUILD MP.124.107.55 , SYS VERS=24.61.55OSPREY
It is an unlocked euro version with 1gb ram , i.e not locked to any carrier or ever has been.
I was able to unlock the bootloader , I then followed very carefully the instructions on this site to get the image , usb drivers and everthing required.
However once ono entering the commands at the dos window to start flashing a new rom it comes back with an error , I think I have the incorrect image or there is not one on this site.
I am a complete nuubie can anyone help me please.
D:\XT1541_OSPREY_RETEU_5.1.1_LPI23.72-66_cid7_subsidy-DEFAULT_CFC.xml>fastboot flash partition gpt.bin
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ -0.000s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.417s
D:\XT1541_OSPREY_RETEU_5.1.1_LPI23.72-66_cid7_subsidy-DEFAULT_CFC.xml>
I get this after entering fastboot flash partition gpt.bin
some progress
robin red said:
D:\XT1541_OSPREY_RETEU_5.1.1_LPI23.72-66_cid7_subsidy-DEFAULT_CFC.xml>fastboot flash partition gpt.bin
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ -0.000s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.417s
D:\XT1541_OSPREY_RETEU_5.1.1_LPI23.72-66_cid7_subsidy-DEFAULT_CFC.xml>
I get this after entering fastboot flash partition gpt.bin
Click to expand...
Click to collapse
ok I managed to get to the part when I load the sparse files 0-5 , it send them all but reports failure on them all every other command on the list executes correctly.
After this it locked for a while a rebooted in version 6 marshmellow.!!!!! well I guess I am learning.
Anyone any ideas , guess I am lucky I did not brick the thing.
here is what I am getting after entering the third command
C:\Users\Robin L\Desktop\roby>fastboot flash partition gpt.bin
target reported max download size of 268435456 bytes
sending 'partition' (32 KB)...
OKAY [ -0.000s]
writing 'partition'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.470s
Hello
I would like to return my HTC one mini to factory firmware. After much searching, I found and downloaded this:
https://www.androidfilehost.com/?w=files&flid=29622
PO58IMG_M4_UL_K44_SENSE60_MR_HTC_Europe_4.14.401.2_Radio_1.28.40e.00.24_10.z19.40.1304L_release_450912_combined_signed.zip
I checked my device version:
$ Fastboot getvar version-main
version-main: 4.14.401.2
finished. total time: 0.006s
I tried this:
fastboot oem rebootRUU
fastboot flash zip firmware.zip
target reported max download size of 800227328 bytes
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 300873309 is not a multiple of the block size 4096
sending sparse 'zip' 1/2 (781468 KB)...
error: write_sparse_skip_chunk: don't care size 300873309 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 300873309 is not a multiple of the block size 4096
OKAY [ 39.015s]
writing 'zip' 1/2...
(bootloader) signature checking...
FAILED (remote: 12 signature verify fail)
finished. total time: 128.246s
The bootloader is relocked.
What could be the problem?
P.S. I cannot open the zip file in Windows. It says it is invalid. Could be corrupt?
Hmm... I think that a Relocked bootloader is the problem. By the way did you try flashing the RUU trough TWRP?
Hi guys,
I have problem with my rooted Xperia E C1505 with unlocked bootloader. I'm trying to flash system but it always end with error.
What I tried:
Code:
fastboot flash system system.img
Ends up with:
Code:
target didn't report max-download-size
sending 'system' (208764 KB)...
FAILED (remote: Download size too large)
finished. total time: 0.008s
So I tried to flash it in multiple parts:
Code:
fastboot -S 128M flash system system.img
And got stuck with this message:
Code:
Invalid sparse file format at header magi
error: write_sparse_skip_chunk: don't care size 79560896 is not a multiple of the block size 4096
sending sparse 'system' 1/2 (131068 KB)...
error: write_sparse_skip_chunk: don't care size 79560896 is not a multiple of the block size 4096
error: write_sparse_skip_chunk: don't care size 79560896 is not a multiple of the block size 4096
(bootloader) USB download speed was 20194kB/s
OKAY [ 6.708s]
writing 'system' 1/2...
(bootloader) Flash of partition 'system' requested
(bootloader) S1 partID 0x00000004, block 0x00033000-0x00177fff
(bootloader) Unsupported chunk type: 0x0
At this point flashing stuck.
I don't know what to do with it because flashing boot/userdata works great, erasing partitions doesn't help and another threads on this subject also doesn't help me a lot.
Maybe could be helpful that
Code:
fastboot getvar all
returns nothing.
I also tried to change USB cable but it doesn't seem like this is the problem.
Thanks for any help