Hi everyone, I'm new to the forum.
It from about two or three months I became an "Android modder", when I installed CyanogenMod13 on my Samsung Galaxy s3, just because I had the JelllyBean version of the system and I wanted to switch to a newer one.
But the problem came when I tried to put Marshmallow on my Motorola Xoom2 (3G z616), that had an IceCream SandWich Android version.
After a few tries I discovered that my tablet as an unlockable bootloader, but the damage was already done.
This afternoon I wiped the all to factory settings, but the problem wasn't resolved.
Tecnically my tablet works fine, I rooted it using KingRoot app and installed SuperSU for root permission management.
But the problem is that everytime I shutdown or reboot my tablet, it automatically enters AP Fastboot Mode.
That's not a big problem, I just have to click the power button, then enter the choose menu between Normal, Recovery, and a few other startup types. It's just very annoying. And if my mother or someone else as to use it, he/she doesn't know how to powerup the tablet.
Does anyone now how to solve it, I mean, how to not enter fastboot mode each time I shutdown the tablet?
Thanks to everyone!!
Related
The unit has been used for about 2 months and remains quite new. It was quite stable before. Yesterday night, about half an hour after plugged in for charging and with WiFi Hotspot turned on for sharing 3G data to another netbook, the unit suddenly rebooted itself. It then stopped at the start-up screen and remained there for several minutes. I kept holding the power button for a few seconds to turn it off but it then automatically reboot itself afterwards, and stopped at the start-up screen again. It means that even complete turning off is not possible.
Trying to enter into recovery mode showed the following few lines:
# MANUAL MODE #
-- Updating application...
Copying Common Apks.
Click to expand...
Click to collapse
and then it automatically rebooted again. It means that it can't enter into recovery mode normally.
It was possible to enter into download mode. And it was the first time this machine went into download mode. I run Odin Downloader and flashed the official stock ROM. After showing "Pass", the device rebooted itself. Unfortunately, it still stopped at the start-up screen, just showing "Samsung Galaxy Tab 7.0 plus". It is really troubesome. I have experience playing several Android devices before and it is the first time I face such troublesome problem.
The device is an official product. The biggest problem is that the original purchase invoice was lost and most likely that I couldn't get official support, repair service or replacement.
May I ask if anyone would kindly provide me some help or advice. Thanks!
Instead of going into download mode go into recovery mode and see if there are any errors. Your scenario is sounding very similar to the one I had in the past.
I just ran into a nasty snag at boot logo as well. nandroid, stock kernel and factory reset were no help. Try Odin back to Stock, it still may not get past boot logo, hold vol up and power to get into recovery and factory reset. Hope it works for you.
Unfortunately I was unable to get into recovery mode even after odin flashing stock ROM.
It rebooted itself a few seconds after displaying some lines of text. I can't see the normal recovery menu.
Galaxy Nexus Rooted running Jelly Bean 4.2 (bigxie_magurTA_JOP40C_odexed-signed) received a Google? up date notice for 4.2 like an idiot thought it was 4.21 and started it. Phone now hung. after a lot of messing about I am stuck at Google Screen. When Connected to PC, Device manager shows it under Portable Devices as Samsung Mobile MPT Device.
When I boot into bootloader it shows as Android Phone, Android ADB Interface. When I go into Recovery (ClockworldMod Recovery V 6.0.1.0) it shows as Android Phone, Samsung Android ADB Interface I've done all I can think of Wiped every hoping to get somewhere or back to stock or something.
I cant get anything on the phone. Everything I have tried is either waiting for device or cant find device
I did read that from recovery holding power key and pressing up key will reset it but that dosnt work in ClockworldMod
When I installed 4.2 I removed the Zip so I couldn't install that and now As I have wiped the phone There is nothing to Install
I have pulled the battery and sim card held power key down. left the phone on Google screen overnight
1 Can I get rid off ClockworldMod
2 How do I get into the phone to flash a ROM?
Any help would be very welcome
PC running Win 8
Thanks
fixed
solved problem with nexus root toolkit 1.6.1
Hello,
My GF have a Galaxy Note 10.1 (GT-N8000) and in february she updated to N8000UBCML2. Ah, she never used root, CWM, etc, her tablet is totally "official", so she updated her tablet using WiFi but after the update her tablet started to "reboot every X hours" sometimes more or less. I did a wipe and her tablet is now very better but sometimes he just reboot and get in loop.
She asked me to go to the old version, since the old version was working fine. So I tried to enter in Recovery Mode but her tablet just reboot 2~3 seconds after enter in Recovery Mode, I really don't know what to do I can't use Odin.
Someone help plx
Try this video it may help. Go to 1:08 and try that method.
https://www.youtube.com/watch?v=ozLJ1JrxEnM
Hi There,
Firstly I do apologize if this has already been posted, but I have searched through the forums and have not been able to find any specific information about this particular problem.
I have a Galaxy S3 (purchased in 2012) and a few weeks ago, the phone started to automatically switch off (when I locked it) and I would have to hold the power button for about 15-30 seconds for it to switch back on.
I checked the power button(to see if it was broken and pressing down all the time) but it seemed to be fine as whenever I pulled the battery (and put it back in after 1 minute) the phone would NOT come on unless I held the power button.
Also tried replacing the battery, but that did not seem to work.
About 1 week ago when i tried to turn my phone on, with the power button, but it would get stuck on the samsung logo screen (it was frozen, not looping).
I was still able to enter both recovery and download mode. So I tried wiping the cache but it did nothing.
Then I tired flashing the ROM with ODIN and it passed but it also did nothing (tried flashing multiple times all with "PASS" as well as wiping the data cache in conjuction with the flashing but to no avail).
Tried flashing it again with BL and it also passed, but now whenever I try to enter Recovery Mode or Turn the phone ON it would display a White Scrambled Screen which probably means eMMC failure.
Now for the problem:
How do I retrieve the information on the phone ?
N.B;
- I do not care about fixing the phone, only want the information
-I cannot enter Recovery Mode, BUT I can enter download mode.
-When I connect S3 to PC it is detected (In Device Manager it states "Samsung Mobile USB CDC Composite Device")
-I did have my phone password protected before this happened using the Pattern Password (you have a 3x3 Dot grid in which you can use to draw a line(s) which will function as a password)
-My phone is an S3 GT-I9300
-Never interfered with the ROM or software on the phone before this (was running the official android software from Samsung which I believe was Android Version 4.3).
-Have Tried EaseUs, but it does not detect the phone.
bossman111 said:
Hi There,
Firstly I do apologize if this has already been posted, but I have searched through the forums and have not been able to find any specific information about this particular problem.
I have a Galaxy S3 (purchased in 2012) and a few weeks ago, the phone started to automatically switch off (when I locked it) and I would have to hold the power button for about 15-30 seconds for it to switch back on.
I checked the power button(to see if it was broken and pressing down all the time) but it seemed to be fine as whenever I pulled the battery (and put it back in after 1 minute) the phone would NOT come on unless I held the power button.
Also tried replacing the battery, but that did not seem to work.
About 1 week ago when i tried to turn my phone on, with the power button, but it would get stuck on the samsung logo screen (it was frozen, not looping).
I was still able to enter both recovery and download mode. So I tried wiping the cache but it did nothing.
Then I tired flashing the ROM with ODIN and it passed but it also did nothing (tried flashing multiple times all with "PASS" as well as wiping the data cache in conjuction with the flashing but to no avail).
Tried flashing it again with BL and it also passed, but now whenever I try to enter Recovery Mode or Turn the phone ON it would display a White Scrambled Screen which probably means eMMC failure.
Now for the problem:
How do I retrieve the information on the phone ?
N.B;
- I do not care about fixing the phone, only want the information
-I cannot enter Recovery Mode, BUT I can enter download mode.
-When I connect S3 to PC it is detected (In Device Manager it states "Samsung Mobile USB CDC Composite Device")
-I did have my phone password protected before this happened using the Pattern Password (you have a 3x3 Dot grid in which you can use to draw a line(s) which will function as a password)
-My phone is an S3 GT-I9300
-Never interfered with the ROM or software on the phone before this (was running the official android software from Samsung which I believe was Android Version 4.3).
-Have Tried EaseUs, but it does not detect the phone.
Click to expand...
Click to collapse
Hello, the best solution will be to ask here Galaxy S III Q&A, Help & Troubleshooting since that guys know more about mentioned device.
Thank you
Paget96 said:
Hello, the best solution will be to ask here Galaxy S III Q&A, Help & Troubleshooting since that guys know more about mentioned device.
Thank you
Click to expand...
Click to collapse
Hi There Krusevac,
Thanks for the reply.
I will check it out.
Kind Regards,
B
bossman111 said:
Hi There Krusevac,
Thanks for the reply.
I will check it out.
Kind Regards,
B
Click to expand...
Click to collapse
No problem
Sent from my Nexus 5 using Tapatalk
Hey guys, I've got a Kyocera Brigadier and I decided to change the runtime from Dalvik to ART. Now the phone is stuck on loadscreen and I don't know how to fix it. The phone is rooted using the KingRoot app, but I don't know if that would help in any way.
Please help me guys!
Similar Issue
I am have a very similar issue, I also rooted my Brigadier with Kingroot and all went well. However, I attempted to flash the Xposed Framework onto it using Flashify. After doing such it got stuck in a bootloop, I was able to fix that problem by booting into fastboot mode and using fastboot to push stock firmware back onto my device. However now I have an even bigger problem where my phone boots up to the Powered by Android screen and then to the Kyocera screen, however instead of continuing to boot to the Verizon Wireless screen and then into the phone, it gets stuck at a black screen. I have tried waiting for hours and nothing at all happens, also I can no longer seem to boot into fastboot mode or in other words the Powered by Android screen with the little 1 in the top left corner of the screen. Fastboot nor ADB recognizes the device when plugged into my computer, as neither list anything when ran. Please help, I don't want to have to pay and end up sending my phone into Verizon to be unbricked.
Ornias Abezethibou said:
I am have a very similar issue, I also rooted my Brigadier with Kingroot and all went well. However, I attempted to flash the Xposed Framework onto it using Flashify. After doing such it got stuck in a bootloop, I was able to fix that problem by booting into fastboot mode and using fastboot to push stock firmware back onto my device. However now I have an even bigger problem where my phone boots up to the Powered by Android screen and then to the Kyocera screen, however instead of continuing to boot to the Verizon Wireless screen and then into the phone, it gets stuck at a black screen. I have tried waiting for hours and nothing at all happens, also I can no longer seem to boot into fastboot mode or in other words the Powered by Android screen with the little 1 in the top left corner of the screen. Fastboot nor ADB recognizes the device when plugged into my computer, as neither list anything when ran. Please help, I don't want to have to pay and end up sending my phone into Verizon to be unbricked.
Click to expand...
Click to collapse
I have the same problem. I bought a new a Brigadier that was on 4.4.2. I rooted with Kingroot ran update and now my phone will not boot past Kyocera screen. It goes black with the back light on. Did factory wipe and still nothing. I am shocked that KK has killed yet another phone of mine. I very much dislike KK ROM. What did you find out?