Related
I'm using a CM11 ROM, and Superuser is giving me problems - throws up errors now & again. I like and want to use SuperSU, but Superuser is integrated into the ROM.
How can I get rid of Superuser and replace with SuperSU (preferably just using my phone, no ADB).
setspeed said:
I'm using a CM11 ROM, and Superuser is giving me problems - throws up errors now & again. I like and want to use SuperSU, but Superuser is integrated into the ROM.
How can I get rid of Superuser and replace with SuperSU (preferably just using my phone, no ADB).
Click to expand...
Click to collapse
in the integrated superuser menu(can be found in device settings), if you open settings, you have the option of giving superuser access to "disabled" (by default it is apps only).
after disabling you just have to flash the supersu zip file(can be found on the supersu xda forum) via recovery mode. and you're done.
I flash the superSU.zip after flashing CM11 and Gapps so superSU is the main root app. Never had an issue.
Please keep it friendly and there is no need for name calling of any kind. We tend not to like people resurrecting old threads, but seen as this came in handy for someone there's no harm done.
Thread cleaned.
wedgess said:
Please keep it friendly and there is no need for name calling of any kind. We tend not to like people resurrecting old threads, but seen as this came in handy for someone there's no harm done.
Thread cleaned.
Click to expand...
Click to collapse
Thank you, mod. Wasn't trying to cause any problems, just trying to help a new member.
rdx93 said:
in the integrated superuser menu(can be found in device settings), if you open settings, you have the option of giving superuser access to "disabled" (by default it is apps only).
after disabling you just have to flash the supersu zip file(can be found on the supersu xda forum) via recovery mode. and you're done.
Click to expand...
Click to collapse
i'm having some problems in cm11 with superuser too so i took your advice and disabled it and flashed the supersu.zip but still no root and then i went back to enable it again under settings but now the superuser option is gone.
how do i fix this?
Just make clean flash of CM, then get SuperSU via store
JimZiii said:
i'm having some problems in cm11 with superuser too so i took your advice and disabled it and flashed the supersu.zip but still no root and then i went back to enable it again under settings but now the superuser option is gone.
how do i fix this?
Click to expand...
Click to collapse
In the SuperSU settings, there is a setting called something like "Respect Cyanogenmod Settings". Uncheck that.
Thnx alot! Works great! Now i just have to change that stupid google dialer that's in cm11
Sent from my GT-I9300 using Tapatalk
Just installed Gummy ROM with Kitkat and everything appeared to be ok at first, but after installing PA-Gapps (Stock Package) I noticed that I didn't have root anymore? I re-installed Gummy again and used the Mini Modular package. I had root back! but this morning I woke up to an alert from Titanium Backup that it couldn't make an auto back up because it didn't have root .... I checked #superuser under settings and it shows that TiB and Rom Manger are on the allowed list which I added yesterday.
I'm just wondering what is breaking the root? Is it the Gapps? I did have SuperSU installed, but I uninstalled that this morning thinking there might be a conflict. Do I try re-installing Gummy ROM again?
Thanks for any help
Chris
There's a few options.
1- flash a custom kernel like lean or dkp. Then go to superuser, click on 'Apps and adb' and root access should be restored.
2- flash the su update: http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip
beepea206 said:
There's a few options.
1- flash a custom kernel like lean or dkp. Then go to superuser, click on 'Apps and adb' and root access should be restored.
2- flash the su update: http://download.chainfire.eu/372/SuperSU/UPDATE-SuperSU-v1.86.zip
Click to expand...
Click to collapse
Thanks! I installed Lean kernel and restored root through superuser.
This is a modified version of @jrkruse stock BPB1 deodexed ROM with all(or most) of the stock BS removed.
INSTRUCTIONS:
I've included the links needed if you want to use xposed. If you chose not to use Xposed, then skip that step in the flashing process.
I have only used Safestrap to install this ROM, but FlashFire should work as well.
1) Flash NO_BS_BPB1_ROM_DEODEXED.zip
2) Flash Extra_toggles.zip
3) Flash xposed-v75-sdk21-arm-arter97-snapdragon.zip
4) Flash Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
5) Flash BPB1_Firmware_No_Bootloaders.zip
6) After first boot, open Lollipop Recovery Control and install the latest Safestrap.
7) Open up Viper4Android and install the driver. Then install Viper Fix 1.1.apk and run the Viper fix in the app.
There is no need to flash any Viper zips with this ROM. This ROM has all the same apps as BOK3 V5, but obviously updated to the BPB1 apps. The only app added is multiwindow. I don't use multiwindow, so I can be certain that all aspects of it work, but everything seemed to work normally when I played with it.
Note: Don't pay attention to the 1- prefix in front of some of the ROM versions. I prefix all my flashables in my ROM folder with a 1-, 2-, 3-, ect, so that I have them all in order when I flash them instead of having to remember the order every time lol. I forgot to remove those prefixes when I uploaded the ROMs.
reserved
reserved1
Can this be dirty flashed over your bs free bok3?
Sent from my SM-G900V using Tapatalk
---------- Post added at 05:14 PM ---------- Previous post was at 04:53 PM ----------
Just dirty flashed. All is good so far. Thank you
Sent from my SM-G900V using Tapatalk
I've downloaded it multiple times from multiple mirrors, I keep getting 6619258FCFF93587050F9E15B2FFBAA9 as the md5 not
a1d8316898d604314b884dafb09298b0 that is listed for 1-NO_BS_BPB1_ROM_DEODEXED.zip on the download page. I'll give it a try anyway since I can always reflash my NCG stock.
Edit:
It works! But now I have 492 errors anytime I want to download something from google play? Anyone else with this issue?
renthispace said:
I've downloaded it multiple times from multiple mirrors, I keep getting 6619258FCFF93587050F9E15B2FFBAA9 as the md5 not
a1d8316898d604314b884dafb09298b0 that is listed for 1-NO_BS_BPB1_ROM_DEODEXED.zip on the download page. I'll give it a try anyway since I can always reflash my NCG stock.
Click to expand...
Click to collapse
Does anyone know what exactly is new/improved in this BPB1? I feel like these versions keep getting released, but I have no idea what is actually improved LOL.
Thanks! Seems to be working well. Google Calendar kept force closing, so I removed it and installed the Play Store version.
Some apps seen to have a touch recognition problem, like titanium backup. Haven't had any FC errors.
renthispace said:
Edit:
It works! But now I have 492 errors anytime I want to download something from google play? Anyone else with this issue?
Click to expand...
Click to collapse
twelvevyan said:
Some apps seen to have a touch recognition problem, like titanium backup. Haven't had any FC errors.
Click to expand...
Click to collapse
I don't have any of these problems on mine. Does anybody else? It sounds like you guys might have some bad data from a previous ROM. The Play Store was updated in this ROM, so clear data for the Play Store, and that might fix the problem.
Stupifier said:
Does anyone know what exactly is new/improved in this BPB1? I feel like these versions keep getting released, but I have no idea what is actually improved LOL.
Click to expand...
Click to collapse
It is just security patches in this ROM. I haven't found anything really new.
btonetbone said:
Thanks! Seems to be working well. Google Calendar kept force closing, so I removed it and installed the Play Store version.
Click to expand...
Click to collapse
I wouldn't expect Google Calendar to work, because it's not in the ROM lol.
Few Questions
First, since I'm pretty new to flashing ROMs with SafeStrap...
At each step of your process when you say "Flash" does that mean Safestrap-> Boot to Recovery ->Install Zip ???
I'm looking at needing Xposed in order to bypass my company's Exchange security requirement of encrypting my device in order to allow email access.
I got a little confused with all the Xposed documentation out there.
Does this set of instructions get me to where I can load the Xposed module to bypass that security and then continue from there?
Big Thanks for your help.
I'm going to start a backup of current ROM so I'll be ready to install this soon.
Regards,
NerdyKowboy
NerdyKowboy said:
First, since I'm pretty new to flashing ROMs with SafeStrap...
At each step of your process when you say "Flash" does that mean Safestrap-> Boot to Recovery ->Install Zip ???
I'm looking at needing Xposed in order to bypass my company's Exchange security requirement of encrypting my device in order to allow email access.
I got a little confused with all the Xposed documentation out there.
Does this set of instructions get me to where I can load the Xposed module to bypass that security and then continue from there?
Click to expand...
Click to collapse
Yes, flash means install in Safestrap.
If you flash the Xposed zip I linked in the original post, then you can use modules in the Xposed installer app included in the ROM.
CVertigo1 said:
This is a modified version of @jrkruse stock BPB1 deodexed ROM with all(or most) of the stock BS removed.
INSTRUCTIONS:
I've included the links needed if you want to use xposed. If you chose not to use Xposed, then skip that step in the flashing process.
I have only used Safestrap to install this ROM, but FlashFire should work as well.
1) Flash NO_BS_BPB1_ROM_DEODEXED.zip
2) Flash Extra_toggles.zip
3) Flash xposed-v75-sdk21-arm-arter97-snapdragon.zip
4) Flash Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
5) Flash BPB1_Firmware_No_Bootloaders.zip
6) After first boot, open Lollipop Recovery Control and install the latest Safestrap.
7) Open up Viper4Android and install the driver. Then install Viper Fix 1.1.apk and run the Viper fix in the app.
There is no need to flash any Viper zips with this ROM. This ROM has all the same apps as BOK3 V5, but obviously updated to the BPB1 apps. The only app added is multiwindow. I don't use multiwindow, so I can be certain that all aspects of it work, but everything seemed to work normally when I played with it.
Note: Don't pay attention to the 1- prefix in front of some of the ROM versions. I prefix all my flashables in my ROM folder with a 1-, 2-, 3-, ect, so that I have them all in order when I flash them instead of having to remember the order every time lol. I forgot to remove those prefixes when I uploaded the ROMs.
Click to expand...
Click to collapse
1.) In safestrap, just do wipe->factory reset or is more of a wipe required?
2.) Can I flash them all using the Zip Queue in Safestrap (TWRP 2.7.1.0) or should I do them one at a time?
Factory reset in factory recovery. You can install all of them on one queue.
CVertigo1 said:
Factory reset in factory recovery. You can install all of them on one queue.
Click to expand...
Click to collapse
I did that, and this is AWESOME. Love the ROM. Tough to decide between the two launchers. Haven't had this level of control in a while.
Only snag was that Android Pay doesn't recognize the device as Android authentic, so can't use Android Pay (which I almost never used anyway).
Thanks for all the work @CVertigo1
NerdyKowboy said:
Only snag was that Android Pay doesn't recognize the device as Android authentic, so can't use Android Pay (which I almost never used anyway).
Thanks for all the work @CVertigo1
Click to expand...
Click to collapse
I believe Android Pay doesn't work sheerly because the device is rooted, not because of the ROM itself.
Can't get snapchat to login with Xposed. I've read the solution is to do an Xposed framework uninstall, login to Snap, then reinstall Xposed, but have found a lot of people get hung in a bootloop when uninstalling.
Is this from using the wrong uninstaller or something else?
Which uninstaller is correct?
Do you have another solution?
I have tried removing the modules and doing a reboot to see if that'd be adequate.
EDIT:
The issue was the xposed framework.
To anyone else doing this on Galaxy S5 with this ROM (or same version of Xposed)
1.) uninstall Snapchat
2.) Deactivate modules from Xposed
3.) Download and Flash "xposed-uninstaller-arter97.zip" from this post: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
4.) Reboot and wait for all the apps to Optimize
5.) Reinstall snapchat and login
6.) Flash the same Xposed framework in original post of this thread (apps will re-optimize)
Is there a way to disable the high volume warning? I can't believe they now also have it on Bluetooth...
renthispace said:
Is there a way to disable the high volume warning? I can't believe they now also have it on Bluetooth...
Click to expand...
Click to collapse
Since Xposed is already in the ROM, inside of Xposed, go to Downloads & download the module "NoSafeVolumeWarning". Enable it and reboot.
Boom. No more volume warning.
NerdyKowboy said:
Can't get snapchat to login with Xposed. I've read the solution is to do an Xposed framework uninstall, login to Snap, then reinstall Xposed, but have found a lot of people get hung in a bootloop when uninstalling.
Is this from using the wrong uninstaller or something else?
Which uninstaller is correct?
Do you have another solution?
I have tried removing the modules and doing a reboot to see if that'd be adequate.
EDIT:
The issue was the xposed framework.
To anyone else doing this on Galaxy S5 with this ROM (or same version of Xposed)
1.) uninstall Snapchat
2.) Deactivate modules from Xposed
3.) Download and Flash "xposed-uninstaller-arter97.zip" from this post: http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3113463
4.) Reboot and wait for all the apps to Optimize
5.) Reinstall snapchat and login
6.) Flash the same Xposed framework in original post of this thread (apps will re-optimize)
Click to expand...
Click to collapse
So were you able to uninstall Xposed? I see your edit of "fixed issue" but in case you didn't or having issues I posted this in another thread.
http://forum.xda-developers.com/showpost.php?p=65635081&postcount=18
al50 said:
So were you able to uninstall Xposed? I see your edit of "fixed issue" but in case you didn't or having issues I posted this in another thread.
http://forum.xda-developers.com/showpost.php?p=65635081&postcount=18
Click to expand...
Click to collapse
Yes, that fixed the issue.
Successfully uninstalled Xposed, Reinstalled SnapChat and logged in without issue. Then, reflashed the Xposed framework.
So easy, but I was so nervous doing it after seeing many, many people talking about getting hung in a bootloop.
Hello guys, I open a Question and Answer Thread for all SuperMan Rom users, so even users under 10 posts can ask their questions here.
Below I added some basic Q&A stuff which can also be found at the main thread, if you have any question, read through them before posting, thanks!
In case you search for the changelog have a look: Changelog post
If you want to see my post with all useful links such as TWRP, magisk, xposed and more visit: useful post​
Basic Questions:
Q: How to get into Download Mode?
A: Power off your phone, than hold: home + volume down + power on button until you see the download mode.
Q: How to get into Recovery Mode?
A: Power off your phone, than hold: home + volume up + power on button until you see the recovery mode.
Q: My Phone is stuck at boot and doesn't start, what to do??
A: Update your bootloader and modem. Also make sure you have made a fresh install of the rom. Bootloader and Modem can be found in the OP. Another problem can be that you are didn't decrypt your phone. To fix this read below how to disable encryption.
Q: Do I need to update bootloader and modem after every update?
A: It's recommend to update your bootloader and modem everytime there is a new base yes. The developer will tell you if necessary on every rom changelog.
Q: I get verification failed at start up!?!? My phone is broken now?
A: Yes, you have to buy a new phone now. Just kidding You did not disable force encryption in TWRP (how to do so you will find below in how to decrypt your phone).
Q: I get verification FRP LOCK? WHYYYYYY???
A: Very simple answer, you did not enable OEM Unlock in developer options. Now you need to flash full rom with odin again and start from scratch. But don't forget to enable OEM Unlock this time!
Q: Which devices are supported at the moment?
A: Current supported devices are: SM-G930F/FD/K/L/S/W8. Snapdragons are NOT supported
Q: Is this rom working on Snapdragon 820 variants?
A: No, sadly not.
Q: I want to change something in my rom setup, how can I do that?
A: Simply reflash the same rom version without any wipe and than choose the correct things you want.
Q: Some features are not present in this rom, but they are on stock rom, so where are they?
A: In aroma installer you have the option to select bloat you want to install or not, you probably didn't select all package, this is why it's missing now.
Q: After a clean install my phone is overblated with many custom settings. What to do?
A: Open my romcontrol, grant it root permissions and then my default settings will be applied.
Q: Will you add X or Y feature?
A: You can kindly ask in the thread for that, if I like your suggestion I will think about adding it to the rom.
Q: You said you fixed SD card RW but Titanium Backup can't write to external SD card, why???
A: This is because of googles changes concerning SD card, to fix this open Titanium Backup, Menu, Preferences, Backup Folder Location, Storage provider and than hit DocumentProvider Storage and select your SD card. Problem solved
Q: I can't find X and Y mod. Please help
A: I've added many links and useful stuff to this post here. Hope that's what you have been looking for!
Q: I want to have my external storage like an internal as well. Google introduced it with android Marshmallow, but I can't see this option?
A: Just follow this Guide here and you can setup your SD card as normal storage
Q: I got a new strange icon appearing after nougat update. What's that?
A: This is a new advanced calling feature introduced in android nougat. Should make your call quality better or something like this. To hide it please visit following forum: Get rid of RCS icon
Questions concerning rom updates:
Q: Do I have to do a full wipe for the new version?
A: It is always the best option to make a clean install, otherwise please don't come and report bugs!
Q: But I don't want to make a full wipe when only small stuff changed!
A: For updates using the same bases you can install the rom with a dirty flash. BUT with a new base a clean install is highly recommend!
Q: What steps should I do to update to a new version with a full wipe but keep all data?
A: There are some different ways. One way is to make a backup with Titanium Backup, you can backup all Apps and Preferences there. Make sure to store this backup on external SD card (if you have one). Second way would be to save your data onto a google account or samsung cloud and restore it after a clean install.
Q: I miss an apk after rom update, how can I get it back?
A: Simply reflash rom and select "dirty flash" in aroma + select the app this time in aroma.
Q: My battery life is so bad and performance is very poor after an update!?!?
A: This comes actually not form the rom itself, dirty flash can cause problems even if only some small things have been changed. So simply install it clean again and it will solve your problem.
Q: Performance and battery is very poor even after clean install. What should I do now?
A: I assume you installed Xposed than, some modules can cause batterydrain and performance problems. So try to make a clean install of the rom WITHOUT xposed installed.
Questions about log and logcats:
Q: I got FC's and other Problems with the rom, what to do?
A: Take a logcat for me, developers use to say: without a log, it never happened . A logcat can be grabed with a PC and ADB installed, simply type: adb logcat > log.txt while your phone is connected and the error is happening. Same can be done if you have a terminal installed on your phone. Simply type adb logcat > log.txt and you will have the same output as on the PC.
Q: What kind of logs can I provide to help you?
A: Logcat: This one is for general infos about FC's
DMESG: this is for kernel related things
Last_Kmsg: this can be used after a random reboot
Q: How to get logs?
A: 1. Connect your phone to your pc
2. Make sure you got usb debugging enabled
3. Install Minimal ADB tool
4. After install open it and type: adb logcat > logcat.txt, adb shell dmesg > dmesg.log, adb shell cat proc/last_kmsg kmsg.log
5. Send me the file you got
You can also send me a log created by your phones terminal with the exact same commands!
Questions about RomControl:
Q: None of my romcontrol changes do anything, why are you such a bad dev!?!?
A: The problem is not on my end, you installed stock systemUI (which is STOCK and does not support one single mod). Use another one in aroma instead. The same thing can happen with good lock!
Q: Romcontrol gives FC's to me. HELP!
A: Very simple answer here: wipe data and cache from superman control application. Also make sure storage permissions are given to the romcontrol.
Q: Romcontrol still FC after cleaning data and cache!
A: Make sure you allow storage permission in main settings.
Q: I try to backup my current RomControl setup, but it won't work?
A: It works. Just make sure to enable storage permission in main samsung applicatoin settings. You will find it in internal sdcard under RomControl folder.
Q: I can't restore SuperMan control settings after a clean base update, why?
A: Backup for SuperMan control only works as long as you use the same version of the app, I mostly change very much things in new releases that's why it won't work there.
Q: SystemUI reboot doesn't work in SuperMan settings app, why?
A: Since Nougat update, you need to install busybox in order to get this button working. Without busybox the button will just do nothing.
Q: I enabled weather on lockscreen but I can't see anything...
A: You probably didn't setup or even installed samsungs weather widget. Without it weather on lockscreen won't work too. So reflash the rom with the widget installed this time and set it up.
How to go back to stock:
Q: I like to go back to stock rom, how is this possible?
A: I can provide you here all steps which are needed to go back to a full stock rom.
0. Make a backup and than wipe all partitions in TWRP
1. Go to Sammobile and choose your country
2. Download the file and the attached Odin on sammobile
3. After downloading, put your phone into download mode
4. Make sure drivers are installed and your pc can detect your phone in odin
5. If the box in odin turns blue, add the AP file to AP tab, BL file to BL tab, CP file to CP tab and CSC_HOME to CSC tab
6. Hit start and wait until it is finished.
7. Reboot and you have a stock rom again
Questions about Encryption:
Q: On TWRP there is an error about /data mount, what to do?
A: Your device is encrypted, follow the steps below to get rid of your encryption.
Q: Help, I never had a code and now after installing the rom my phone asks for a password??
A: Your device is still encrypted, on step 0 of my rom instructions it tells you to be sure you're not. So, what do you need to to in case you are still encrypted.
A: HOW TO DISABLE ENCRYPTION:
1. Boot into TWRP
2. Select Wipe
3. Select format data
4. Then you manually need to type "yes" with the keyboard
5. Confirm the wipe (this will remove the encryption)
6. Reboot your recovery
Q: Is there a way to get rid of encryption which is simpler?
A: Not really, you could also wipe data with stock recovery but this is quite a big hassle so above method works better.
Q: And if I want to use this rom with encryption?
A: Normally we can use the stock kernel to encrypt our device, but since the Android 7.0 Nougat update samsung makes a check kernel sides to block deodexed roms from booting. This means that even the stock kernel is build by me to disable knox and tima. So encryption won't work there and you have to encrypt your device after you set up your phone. After that go to settings, security, encrypt device. It may need some additional steps to work...
Questions about CSC/Signal:
Q: Where has the CSC selection gone?
A: To include all csc files, the rom get way to big, so it got it's own thread now, take a look here: CSC installer
Q: I have a weak cellular signal, what can I do against it?
A: Two things: first, install your providers CSC using CSC installer and flash in TWRP or flashing stock CSC with Odin. Second Thing: You can install the modem from your provider, also find your modem on Sammobile and install it with Odin in CP tab.
Q: I don't have all sHealth features, how come?
A: Not all CSCs include this feature. I recommend to use AUT or DBT as it has the best compatibility!
Q: Can I flash MM CSC on N and vis a verse?
A: No, this is clearly not recommend! You can and will face call fc's!
Questions about Xposed:
Q: Does Xposed work yet on Android N 7.0?
A: No it does not! You will end up in a bootloop when you flash it on android N
Q: I selected xposed but now I don't see an app for it?
A: Maybe there went something wrong with installing the app to /data/app from my installer script. But xposed is actually installed only the app is missing, so head over to the download page of xposed app: Material Xposed Thread
Q: I selected xposed but the app shows not active or something else with xposed is not working.
A: This can have 2 reasons:
1. You have installed latest xposed version without installing magisk, magisk is required for most recent xposed version!
2. You used 86.2 xposed (which does not need magisk) but you did not install supersu. Since 86.2 does not use magisk to be systemless it uses supersu instead!
Questions about Magisk:
Q: How can I pass safetynet?
A: 1. Make sure to fully uninstall SuperSU by chainfire
2. Flash most recent 2.4.3 SuperStock Kernel
3. Flash Magisk V12
4. install latest Magisk Manager from playstore
5. Open Magiks Manager, go to settings
6. Enable MagiskHide, systemless hosts and systemless busybox
7. Reboot the phone and check safetynet!
Q: I got out of date binary issue?
A: Since Magisk V11.1 there is no need for phh root anymore. Everything is handled inside the MagiskManager apk!
Q: Where can I configure the root settings in Magisk?
A: Since Magisk V11.1 Magisk uses MagiskSU, you can find it in latest Magisk Manager V4.1
Questions about Snapchat:
Q: Even when I did not use xposed during my setup in rom I can't login to snapchat anymore!
A: Snapchat got updated and now detects even root access on your phone!
Q: What to do to login to snapchat then?
A: Clean install the rom without root and xposed and login to your snapchat, save the app with titanium backup, flash back xposed and root. For the next update of the rom just restore snapchat backup in TB.
Q: Any other possibility?
A: You could enable MagiskHide and check Snapchat inside it so root will be hidden from Snapchat. You will be able to perfectly login without any issues.
Q: I want to discuss this problem a bit deeper. Should I do so?
A: Do that, but this has nothing to do with this rom, so please go ahead and post your experience here on this Snapchat Thread.
Questions about Kernels:
Q: I want to switch kernel, how?
A: Since we have systemless xposed and systemless supersu, we have patches in ramdisk of boot.img. This means you have to reflash Magisk and supersu (or any other zip that changes some stuff in ramdisk partition) after every change of kernel!
Q: Synapse shows no UCI support!
A: Most comon issue is that no busybox is installed. Download the one from here: Latest busybox and flash it in recovery.
Q: I got random reboots, heeelp!
A: This is most likely from a custom kernel, if you face random reboots please check if you have the latest kernel installed or switch back to the stock kernel included in the rom.
Q: My screen is kind of yellow/orange and the touchscreen doesn't work at all!
A: You have chosen the wrong kernel in aroma selection. Reflash the rom without any wipe selecting the right kernel version.
Questions about Root:
Q: I lost root after installing this rom. What to do?
A: All mods (like supersu, phh's root, xposed and magisk) are stored in ramdisk of kernel boot.img. So if you flash this rom, and after this another kernel, simply reflash your preferred root method and it will work again!
Q: I selected phh root but my phone tells me I am not rooted!!
A: There are two possibilities:
1. You have mixed supersu/phh with magisk.
2. You did not install phhs root app from playstore.
Q: I get a warning about binary out of date. Help!
A: That happens on latest Magisk V11.1. Reason: Root has fully moved into Magisk Manager, no additional app required. Uninstall phh or supersu apps and only use magisk!
Q: I want to use su hide on my phone, how to do so?
A: Both below variants are outdated, I recommend to use Magisk with its build in MagiskHide. Check the thread: Magisk Thread
Link to phh's hidesu: Phh's thread
Link to chainfires suhide: Chainfires thread
Hi,
I have a bit of a silly question. I have enabled the torch to be turned on by the volume button but now want to turn that function off and can't remember where i enabled it from. I have looked everywhere but can't find it. Are you able to point me in the right direction.
Many thanks.
reeves72 said:
Hi,
I have a bit of a silly question. I have enabled the torch to be turned on by the volume button but now want to turn that function off and can't remember where i enabled it from. I have looked everywhere but can't find it. Are you able to point me in the right direction.
Many thanks.
Click to expand...
Click to collapse
Hello
Settings, display, torchlight
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Hello
Settings, display, torchlight
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
Thanks that was driving me crazy.
downloadable files verification
Can some one verify that all of the downloadable files on the OP are the correct ones?
Can't seem to get it working, the steps I follow, are as following.
-> flash to stock rom from sammobile
-> OEM unlock
-> flash latest TWRP
-> in TWRP, format data
->install latest BL and CP from OP
-> flash rom -> Clean install
result is a non booting superman rom.. What can I do? I have been trying for DAYS now...
grave-diggers said:
Can some one verify that all of the downloadable files on the OP are the correct ones?
Can't seem to get it working, the steps I follow, are as following.
-> flash to stock rom from sammobile
-> OEM unlock
-> flash latest TWRP
-> in TWRP, format data
->install latest BL and CP from OP
-> flash rom -> Clean install
result is a non booting superman rom.. What can I do? I have been trying for DAYS now...
Click to expand...
Click to collapse
There are several reasons:
1. Encryption is still enabled
2. BL/CP was not successfull
3. You mixed your settings about G930F or G935F model
I noticed a few things in aroma log when it was installing
failure to boot.img extracting ramdisk failure, aborting, is this something that's causing the problem?
I am still not getting it right..
grave-diggers said:
I noticed a few things in aroma log when it was installing
failure to boot.img extracting ramdisk failure, aborting, is this something that's causing the problem?
I am still not getting it right..
Click to expand...
Click to collapse
Thats not really good lol. Redownload the rom. Maybe you got a corrupt zip file
Sent from my SuperMan powered SM-G930F
Holy crap I got it to work.. 4 days of trying to get this to work made me get alot of knowledge about this stuff, the file was corrupt, redownloading the file worked.
grave-diggers said:
Holy crap I got it to work.. 4 days of trying to get this to work made me get alot of knowledge about this stuff, the file was corrupt, redownloading the file worked.
Click to expand...
Click to collapse
Finally!
Sent from my SuperMan powered SM-G930F
Right at this point I am wondering why snapchat doesn't want to log me in. There's no xposed or snapprefs on my phone, exposed uninstaller was flashed. Does this come familliar? There has to be a workaround without having to use bluestacks right?
grave-diggers said:
Right at this point I am wondering why snapchat doesn't want to log me in. There's no xposed or snapprefs on my phone, exposed uninstaller was flashed. Does this come familliar? There has to be a workaround without having to use bluestacks right?
Click to expand...
Click to collapse
Someone said that it even checks for root now
Okay, here's the solution. If you find yourself having trouble logging in in to snapchat on a rooted device without xposed framework installed. Make sure to search for xposed using root explorer, delete all system files manually.. For some reason xposed uninstaller did not completely remove every xposed file in my phone.
SM-G930L
Does this ROM works on Korean variant? SM-G930L is the model. Thanks in advance
genorazer said:
Does this ROM works on Korean variant? SM-G930L is the model. Thanks in advance
Click to expand...
Click to collapse
Make a full backup and try
Sent from my SuperMan powered SM-G930F
Im on fully stocked g930fd
Can u confirmed is this the correct sequence
Root
Install twrp
Make a back up
Make a clean flash
Install superman rom
tatuboy said:
Im on fully stocked g930fd
Can u confirmed is this the correct sequence
Root
Install twrp
Make a back up
Make a clean flash
Install superman rom
Click to expand...
Click to collapse
No need to flash root. Flash twrp, flash bl and cp? backup, wipe (remove encryption) flash rom.
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
No need to flash root. Flash twrp, flash bl and cp? backup, wipe (remove encryption) flash rom.
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
Can u link to me the needed files?
If it have video tutorial much better..
Im from oneplus3 users before.
So i dont have much knowlege in s7.
I need to know
First how to flash TWRP?
2ND What is bl? U mean boot loader?
Cp? What does it mean for?
Then after i back up. And wipe.
How to remove encryption?
tatuboy said:
Can u link to me the needed files?
If it have video tutorial much better..
Im from oneplus3 users before.
So i dont have much knowlege in s7.
I need to know
First how to flash TWRP?
2ND What is bl? U mean boot loader?
Cp? What does it mean for?
Then after i back up. And wipe.
How to remove encryption?
Click to expand...
Click to collapse
Okay you want to install this rom. So go to my main page and follow all android beginner steps. Very detailed guide there
Sent from my SuperMan powered SM-G930F
Tkkg1994 said:
Make a full backup and try
Sent from my SuperMan powered SM-G930F
Click to expand...
Click to collapse
is there a chance it could brick the phone?
drive.google.com/file/d/1tXUgOV6V4cyLU0e9LSRD0DfFHEf7Insw/view
Patch file link .
Download CM 12.1 for lenovo tab 2a7 10f.You will get cm12.1 for 20f
Copy up link to URL bar to download patch file and download cm12.1 by own.
SKDStar1235 said:
drive.google.com/file/d/1tXUgOV6V4cyLU0e9LSRD0DfFHEf7Insw/view
Patch file link .
Download CM 12.1 for lenovo tab 2a7 10f.You will get cm12.1 for 20f
Copy up link to URL bar to download patch file and download cm12.1 by own.
Click to expand...
Click to collapse
Can't get the link bro
Link is open download it
Sorry for link problem caused by it now it will work.
Can you explain how to install?
I download a 12 mb file
I want to 6.0 for lenovo tab-2-A7-20F
SKDStar1235 said:
drive.google.com/file/d/1tXUgOV6V4cyLU0e9LSRD0DfFHEf7Insw/view
Patch file link .
Download CM 12.1 for lenovo tab 2a7 10f.You will get cm12.1 for 20f
Copy up link to URL bar to download patch file and download cm12.1 by own.
Click to expand...
Click to collapse
Installs beautifully with patch! Thanks.
But I can't swap SuperSU for MagiskSU .
Anyone know how? Thanks, PW
pndwal said:
Installs beautifully with patch! Thanks.
But I can't swap SuperSU for MagiskSU .
Anyone know how? Thanks, PW
Click to expand...
Click to collapse
How is the experience bro it's been a long time since I did anything to my tab(3yrs) is the rom fine and what twrp should I flash?
Bravin Joshua said:
How is the experience bro it's been a long time since I did anything to my tab(3yrs) is the rom fine and what twrp should I flash?
Click to expand...
Click to collapse
Better than stock, have Apps2Sd working fine (which is a must on this tab unless you only use 2 apps ?), but can't swap SuperSU for MagiskSU anyhow.
Method:
backup your data,
ensure coming from Lollipop, not KitKat stock, (I had this but had to reflash to fix corrupt cache partition - couldn't wipe - so I'd be inclined to flash LP just for good measure),
flash TWRP (below),
factory reset wipe + system wipe,
flash ROM,
flash patch,
(I then flashed Magisk SU (any) which fails, but removes inbuilt SU first which causes TWRP to offer to apply root which I accepted and this causes SuperSU manager to prompt you to finish setting up root and handles this properly. Don't have to do it this way, but simpler than enabling inbuilt root in developer settings if you want root.)
Boot system,
Boot to TWRP and flash Open GApps (I used Nano - stock boots but has issues with Pixel Launcher).
Setup Apps2Sd (need to select Enable SU during boot and deselect Mount namespace separation in SuperSU manager settings to let simlink stick on reboot).
Enjoy 5.1.1 LOS! PW
Patch link from this thread:
https://drive.google.com/file/d/1tXUgOV6V4cyLU0e9LSRD0DfFHEf7Insw/
Original Tab 2 A7-10 XDA thread - read OP ?.
https://forum.xda-developers.com/android/software/cyanogenmod-12-1-lenovo-tab2-a7-10f-t3478841
TWRP 3.0.2-0 downloaded from 4PDA:
Attached below - unzip first!
Patch and ROM link from 4PDA: https://drive.google.com/folderview?id=0Bxd-XcN0S63qWjJoTVlkRXlrams
Recovery ROM 5.0 + TWRP 2.8.7.0 from 4PDA
https://yadi.sk/d/xVxife28rQbBn
pndwal said:
Better than stock, have Apps2Sd working fine (which is a must on this tab unless you only use 2 apps ?), but can't swap SuperSU for MagiskSU anyhow.
Method:
backup your data,
ensure coming from Lollipop, not KitKat stock, (I had this but had to reflash to fix corrupt cache partition - couldn't wipe - so I'd be inclined to flash LP just for good measure),
flash TWRP (below),
factory reset wipe + system wipe,
flash ROM,
flash patch,
(I then flashed Magisk SU (any) which fails, but removes inbuilt SU first which causes TWRP to offer to apply root which I accepted and this causes SuperSU manager to prompt you to finish setting up root and handles this properly. Don't have to do it this way, but simpler than enabling inbuilt root in developer settings if you want root.)
Boot system,
Boot to TWRP and flash Open GApps (I used Nano - stock boots but has issues with Pixel Launcher).
Setup Apps2Sd (need to select Enable SU during boot and deselect Mount namespace separation in SuperSU manager settings to let simlink stick on reboot).
Enjoy 5.1.1 LOS! PW
Patch link from this thread:
https://drive.google.com/file/d/1tXUgOV6V4cyLU0e9LSRD0DfFHEf7Insw/
Original Tab 2 A7-10 XDA thread - read OP ?.
https://forum.xda-developers.com/android/software/cyanogenmod-12-1-lenovo-tab2-a7-10f-t3478841
TWRP 3.0.2-0 downloaded from 4PDA:
Attached below - unzip first!
Patch and ROM link from 4PDA: https://drive.google.com/folderview?id=0Bxd-XcN0S63qWjJoTVlkRXlrams
Recovery ROM 5.0 + TWRP 2.8.7.0 from 4PDA
https://yadi.sk/d/xVxife28rQbBn
Click to expand...
Click to collapse
Thanks a lot bro ?
Bravin Joshua said:
Thanks a lot bro ?
Click to expand...
Click to collapse
No problem. Please let us know how it goes for you ? . PW
pndwal said:
No problem. Please let us know how it goes for you ? . PW
Click to expand...
Click to collapse
Is it for someone to pickup this tab upto at least Marshmello
Bravin Joshua said:
Is it for someone to pickup this tab upto at least Marshmello
Click to expand...
Click to collapse
Very much doubt it. No custom kernel, and Russians made nothing since 5.1.1
https://4pda.ru/forum/index.php?showtopic=711492 PW
Having trouble with the link you supplied, so any tips for acquiring this data?
evnStevn said:
Having trouble with the link you supplied, so any tips for acquiring this data?
Click to expand...
Click to collapse
Nevermind, I learned the how-to's at github repository, etc...getting at it all now! ty
GregMD said:
Can you explain how to install?
I download a 12 mb file
Click to expand...
Click to collapse
I'll help, once I mutter thru it myself. But ck. the watched thread now, as they've got the links and thread data uploaded using their new/improved platform...as that's what I'm doing step by step on my pc/win 10 ver. Look for the links and scroll thru the threads, I actually went thru the github read to get a little knowledge and newbie basics 101 about coding, etc.
Here's 1 of the 1st d/l you'll need for installing 12.1. You are updated to lolli pop,cover. 6.0 , as that's a big prerequisite as the thread discusses.
evnStevn said:
Here's 1 of the 1st d/l you'll need for installing 12.1. You are updated to lolli pop,cover. 6.0 , as that's a big prerequisite as the thread discud
Click to expand...
Click to collapse