Help Needed: Huawei G610-U20 only vibrate when power on it - Android General

Hello
I have this Huawei G610, suddenly it show me that Encrypted unsuccessful message, then I tried to reset the phone and it doesn't want to.
I tried to Hard reset and i can't go to the Hard reset part>
When I connect it to the usb port in order to try to flash it using stock rom and SP flash tools, the program can't complete formatting with an error. and my phone keeps showing the logo and vibrate then close and open doing the same thing again and looping.
I tried to make a memory test, and that was the results:
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000E7000000(3696MB)
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test :
Writing ...
OK!!
============ NAND Test ============
SKIP! NAND Flash was not detected!
============ EMMC Test ============
EMMC Pattern Test(0x5A5A):
FAILED!!
============================================================================================
is it an EMMC problem? Needed to be replaced or what ??
Help Needed ... Thanks in advance

?
any one ??

PLZ

Related

[Completed] [q] brom error 3149 when i try flashing b6000 yoga talblet

Hi guys
I need helps ! :good: :crying:
I tried to flash my by b6000 yoga tablet
but each time i execute the process of flash i got brom error : 3149
i tried many solutions in the web without results
i gave the device to another one to flash them but without results also
Now When i Tried to power on it i saw nothing even if i flashed the preloader
Here's the test of Memory
What its the problem ?
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000020000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000003A3E00000(14910MB)
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
+
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test :
Writing ...
OK!!
tberma said:
Hi guys
I need helps ! :good: :crying:
I tried to flash my by b6000 yoga tablet
but each time i execute the process of flash i got brom error : 3149
i tried many solutions in the web without results
i gave the device to another one to flash them but without results also
Now When i Tried to power on it i saw nothing even if i flashed the preloader
Here's the test of Memory
What its the problem ?
===============Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000020000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000003A3E00000(14910MB)
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
+
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test :
Writing ...
OK!!
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.You can post your query in Android Q&A,Help and Troubleshooting.Experts there may be able to help you
___
v7
XDA Assist

NAND Flash Was Not Detected

My problem is, after I power on my phone, it stuck at orange logo with white background. Then after a while, it reboot, and stuck again at that logo. Here's my memory test result from SP Flash Tool. What should I do? I flashed S203 CN rom and this problem persist.
Code:
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000080000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000001D2000000(7456MB)

DZ09 Smartwatch firmware

I need firmware for DZ09 with specyfication:
Internal RAM: Size = 0x0000D000 (52KB)
External RAM: Type = SRAM
Size = 0x00800000 (8MB/64Mb)
NOR Flash: Device ID = "[GigaDevice] GD25LQ128" (244)
Size = 0x01000000 (16MB/128Mb)
MT6260_S0000

Sim Detected/No Signal "can't connect to this network at the moment try again later"

Sim Detected/No Signal "can't connect to this network at the moment try again later"
Hi I had my phone flashed with a custom rom. But later i wanted to switch back to stock. I used the SP tool to flash
Back "sprout_reference_pack_1379542-KPW53_ALPS.KK2.AOSP.SPROUT.SP.p52_karbonn".
But before flashing i accidently used the "Format" tab of SP tool.
After that i flashed my phone to stock.
I have no signal. Sim card is detected.
I tried to switch to lollipop stock still the same error. I switched to other roms too but still no Signal and
"can't connect to this network at the moment try again later" if i do a manual connect.
I noticed that first 2 or 3 times on each rom the manual scan select gave error "Network search error".
The Memory Test Tab of Sp flash tool
Code:
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e9000000(3728MB)
============ EMMC Test ============
EMMC Pattern Test(0x5A5A):
And its timer continues to go on with red line Download DA 100%
I guess it has to do with NAND.
ERROR: NAND Flash was not detected!
Please tell me how to recover NAND on MT6582
Alast Found the fix for it guys.
It was due to IMEI Error.
Here is the link to fix if you face such issue.
http://forum.xda-developers.com/cro...out4-permanent-fix-invalid-imei-wifi-t3250044

[Completed] Karbonn A12+ no power or light up but device detected in windows

Hello XDA assist,
Mobile - Karbonn A12+ (MT6572)
Issue - mobile not powering up or lighting display at all even while connected to charger no battery charging indication. Only hope I see is when I connected without battery to computer device drivers detected which is usual for hard flashing.
Notes - Mobile had not fallen and in working condition on my desk , last time I see it on 16% battery suddenly it became off & never light up later.
Current installed ROM is complete fresh and very few apps. Earlier to day I m trying to fix or disable proximity sensor detection with few rooted apps like xposed modules etc but none worked. Later thus also I did lot of internet browsing as well before BLANK OFF.
Trials & Findings.
Long press power button for 1 min.
Shorting +- terminals of power button.
Power + volume up for boot mode.
Connected with out battery to computer for adb boot even Without power+volup its being detected after every 3 secs in windows devices as below but not lighted its display any time....
In Device Manager, it detected as follows...
>Mobistel Cynus F4 PreLoader USB VCOM Port
=== New Trials & Updates ====
I could find that it must be a HardBrick, as not lighting up but still detected in windows.
I did scatter_loading using Sp flash tool & i got download OK message.
But still i am unable to boot it or light up my screen nor battery charging.
Ran a memory test using Sp_Flash tool, below is the result.
============ Memory Detection Report ===========
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x20000000 (512MB/4096Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e7000000(3696MB)
UFS:
ERROR: UFS was not detected!
============ RAM Test ============
Data Bus Test:
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15][D16][D17][D18][D19][D20][D21][D22][D23][D24][D25][D26][D27][D28][D29][D30][D31]
OK!!
Address Bus Test:
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test:
Writing...
OK!!
============ EMMC Test ============
EMMC Pattern Test(0x5A5A):
(0x00600800),(0x00601000),(0x00601800),(0x00602000),(0x00602800),(0x00603000),(0x00603800),(0x00604000),(0x00604800),(0x00605000),(0x00605800),(0x00606000),(0x0066800),(0x00607000),(0x00607800),(0x00608000),(0x00608800),(0x00609000),(0x00609800),(0x0060A000),(0x0060A800),(0x0060B000),(0x0060B800),(0x0060C000),(0x0060C800),(x0060D000),(0x0060D800),(0x0060E000),(0x0060E800),(0x0060F000),(0x0060F800),(0x00610000),(0x00610800),(0x00611000),(0x00611800),(0x00612000),(0x00612800),(0x0061300),(0x00613800),(0x00614000),(0x00614800),(0x00615000),(0x00615800),(0x00616000),(0x00616800),(0x00617000),(0x00617800),(0x00618000),(0x00618800),.............................
Continues...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........Continues ...........
................................(0xC432C000),(0xC432C800),(0xC432D000),(0xC432D800),(0xC432E000),(0xC432E800),(0xC432F000),(0xC432F800),(0xC4330000),(0xC4330800),(0xC4331000),(0xC4331800),(0xC4332000),(0xC4332800),(0xC4333000),(0xC4333800),(0xC4334000),(0xC4334800),(0xC4335000),(0xC4335800),(0xC4336000),(0xC4336800),(0xC4337000),(0xC4337800),(0xC4338000),(0xC4338800),(0xC4339000),(0xC4339800),(0xC433A000),(0xC433A800),(0xC433B000),(0xC433B800),(0xC433C000),
FAILED!!
============ Memory Detection Report ===========
##########################
Please light up my device...
Thanks in advance...
Happy to hear any kind of opinions...
##########################
@xdaAssist ,
eagerly waiting for a solution for this.
Before I do brick or break my phone by doing something else wrong.
Please light up my mobile.
Assist team,
Please help me light up my device...
Or do suggest me where i can post this thread.
Hello xda , am I in wrong section. some one please spare 5 mins for me & throw some idea please.
Sent from my CP8298_I00 using Coolpad Forums
Hello,
Once posted please wait for 24 hours before bumping the thread.
Also you may post your query here Android Q&A Forum with all relevant details, the experts there maybe able to assist you.
Regards
Vatsal,
Forum Moderator.

Categories

Resources