I need firmware for DZ09 with specyfication:
Internal RAM: Size = 0x0000D000 (52KB)
External RAM: Type = SRAM
Size = 0x00800000 (8MB/64Mb)
NOR Flash: Device ID = "[GigaDevice] GD25LQ128" (244)
Size = 0x01000000 (16MB/128Mb)
MT6260_S0000
Related
Hi guys
I need helps ! :good: :crying:
I tried to flash my by b6000 yoga tablet
but each time i execute the process of flash i got brom error : 3149
i tried many solutions in the web without results
i gave the device to another one to flash them but without results also
Now When i Tried to power on it i saw nothing even if i flashed the preloader
Here's the test of Memory
What its the problem ?
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000020000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000003A3E00000(14910MB)
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
+
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test :
Writing ...
OK!!
tberma said:
Hi guys
I need helps ! :good: :crying:
I tried to flash my by b6000 yoga tablet
but each time i execute the process of flash i got brom error : 3149
i tried many solutions in the web without results
i gave the device to another one to flash them but without results also
Now When i Tried to power on it i saw nothing even if i flashed the preloader
Here's the test of Memory
What its the problem ?
===============Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000020000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000003A3E00000(14910MB)
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
+
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test :
Writing ...
OK!!
Click to expand...
Click to collapse
Hello,
Thanks for using XDA Assist.
There's no dedicated forum for your device here in XDA.You can post your query in Android Q&A,Help and Troubleshooting.Experts there may be able to help you
___
v7
XDA Assist
My problem is, after I power on my phone, it stuck at orange logo with white background. Then after a while, it reboot, and stuck again at that logo. Here's my memory test result from SP Flash Tool. What should I do? I flashed S203 CN rom and this problem persist.
Code:
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000080000(0MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000001D2000000(7456MB)
Sim Detected/No Signal "can't connect to this network at the moment try again later"
Hi I had my phone flashed with a custom rom. But later i wanted to switch back to stock. I used the SP tool to flash
Back "sprout_reference_pack_1379542-KPW53_ALPS.KK2.AOSP.SPROUT.SP.p52_karbonn".
But before flashing i accidently used the "Format" tab of SP tool.
After that i flashed my phone to stock.
I have no signal. Sim card is detected.
I tried to switch to lollipop stock still the same error. I switched to other roms too but still no Signal and
"can't connect to this network at the moment try again later" if i do a manual connect.
I noticed that first 2 or 3 times on each rom the manual scan select gave error "Network search error".
The Memory Test Tab of Sp flash tool
Code:
============ Memory Detection Report ===========
Internal RAM:
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC:
EMMC_PART_BOOT1 Size = 0x0000000000400000(4MB)
EMMC_PART_BOOT2 Size = 0x0000000000400000(4MB)
EMMC_PART_RPMB Size = 0x0000000000400000(4MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000e9000000(3728MB)
============ EMMC Test ============
EMMC Pattern Test(0x5A5A):
And its timer continues to go on with red line Download DA 100%
I guess it has to do with NAND.
ERROR: NAND Flash was not detected!
Please tell me how to recover NAND on MT6582
Alast Found the fix for it guys.
It was due to IMEI Error.
Here is the link to fix if you face such issue.
http://forum.xda-developers.com/cro...out4-permanent-fix-invalid-imei-wifi-t3250044
Hi to all
First of all, thansk a lot for all hard job done for the all entire XDA Team. You helped us so much!
Well, I 'm starting into the world of TWRP, Custom ROM, CM, etc. All because I have a Tablet Genesis GT1440 that after a Update, (gt1440_update.img, 392MB) my tablet get two data partitions: One with 0.99GB and another with 2,09GB (no SDCard installed, just the Internal Memory).
And reading how to fix it, I got the page about the Unpacking/Repacking tool imgRepacker.exe
With that, I unpacking the rom I mentioned above and found a lot of files, but one called sys_partition.fex maybe solve my problem.
So I need some help to find out if is possible to edit this and solve the problem if the data partition. This is the file:
;---------------------------------------------------------------------------------------------------------
; 说明： 脚本中的字符串区分大小写，用户可以修改"="后面的数值，但是不要修改前面的字符串
;---------------------------------------------------------------------------------------------------------
;--------------------------------------------------------------------------------------------------
; 固件下载参数配置
;--------------------------------------------------------------------------------------------------
;****************************************************
; mbr的大小, 以Kbyte为单位
;****************************************************
[mbr]
size = 16384
;********************************************************************************************************
; 分区配置
;
;
; partition 定义范例:
; [partition] ; //表示是一个分区
; name = USERFS2 ; //分区名称
; size = 16384 ; //分区大小 单位: 扇区.分区表示个数最多2^31 * 512 = 2T
; downloadfile = "123.fex" ; //下载文件的路径和名称，可以使用相对路径，相对是指相对于image.cfg文件所在分区。也可以使用绝对路径
; keydata = 1 ; //私有数据分区，重新量产数据将不丢失
; encrypt = 1 ; //采用加密方式烧录，将提供数据加密，但损失烧录速度
; user_type = ? ; //私有用法
; verify = 1 ; //要求量产完成后校验是否正确
;
; 注：1、name唯一, 不允许同名
; 2、name最大12个字符
; 3、size = 0, 将创建一个无大小的空分区
; 4、为了安全和效率考虑，分区大小最好保证为16M字节的整数倍
;********************************************************************************************************
[partition_start]
;------------------------------>mmcblk0p2/nanda
[partition]
name = bootloader
size = 32768
downloadfile = "bootloader.fex"
;------------------------------>mmcblk0p5/nandb
[partition]
name = env
size = 32768
downloadfile = "env.fex"
;------------------------------>mmcblk0p6/nandc
[partition]
name = boot
size = 32768
downloadfile = "boot.fex"
;------------------------------>mmcblk0p7/nandd
[partition]
name = system
size = 1572864
downloadfile = "system.fex"
user_type = 0x2
;------------------------------>mmcblk0p8/nande
[partition]
name = data
size = 2097152
user_type = 0x2
;------------------------------>mmcblk0p9/nandf
[partition]
name = misc
size = 32768
;------------------------------>mmcblk0p10/nandg
[partition]
name = recovery
size = 65536
downloadfile = "recovery.fex"
;------------------------------>mmcblk0p11/nandh
[partition]
name = cache
size = 1048576
user_type = 0x2
;------------------------------>nandi, data image backup
[partition]
name = databk
size = 262144
;------------------------------>nandj, private data
[partition]
name = private
size = 32768
keydata = 1
;------------------------------>nandk, UDISK
[partition]
name = UDISK
downloadfile = "diskfs.fex"
verify = 0
So, I think if I correct this file with the corretcs values for data partition, may solve the problem.... or maybe the case is not so simple as I think.... But I am here to try it.
The Tablet is a Genesis GT-1440, with a Allwinner A31 chipset
Regards and thanks a lot for any help
Hello and thank you for using XDA Assist,
please create an account and ask in our Android Q&A section. The expert's there should be able to help you.
Kind regards & good luck
Trafalgar Square
XDA Assist
Hello
I have this Huawei G610, suddenly it show me that Encrypted unsuccessful message, then I tried to reset the phone and it doesn't want to.
I tried to Hard reset and i can't go to the Hard reset part>
When I connect it to the usb port in order to try to flash it using stock rom and SP flash tools, the program can't complete formatting with an error. and my phone keeps showing the logo and vibrate then close and open doing the same thing again and looping.
I tried to make a memory test, and that was the results:
=============== Memory Detection Report ===============
Internal RAM:
Size = 0x00020000 (128KB)
External RAM:
Type = DRAM
Size = 0x40000000 (1024MB/8192Mb)
NAND Flash:
ERROR: NAND Flash was not detected!
EMMC :
EMMC_PART_BOOT1 Size = 0x0000000000200000(2MB)
EMMC_PART_BOOT2 Size = 0x0000000000200000(2MB)
EMMC_PART_RPMB Size = 0x0000000000200000(2MB)
EMMC_PART_GP1 Size = 0x0000000000000000(0MB)
EMMC_PART_GP2 Size = 0x0000000000000000(0MB)
EMMC_PART_GP3 Size = 0x0000000000000000(0MB)
EMMC_PART_GP4 Size = 0x0000000000000000(0MB)
EMMC_PART_USER Size = 0x00000000E7000000(3696MB)
============ RAM Test ============
Data Bus Test :
[D0][D1][D2][D3][D4][D5][D6][D7][D8][D9][D10][D11][D12][D13][D14][D15]
OK!!
Address Bus Test :
[A1][A2][A3][A4][A5][A6][A7][A8][A9][A10][A11][A12][A13][A14][A15][A16][A17][A18][A19][A20][A21][A22][A23][A24][A25][A26][A27][A28][A29]
OK!!
RAM Pattern Test :
Writing ...
0x44332211,
0xA5A5A5A5,
0xA5A5A500,
0xA500A500,
0xA5000000,
0x00000000,
0xFFFF0000,
0xFFFFFFFF,
OK!!
Increment/Decrement Test :
Writing ...
OK!!
============ NAND Test ============
SKIP! NAND Flash was not detected!
============ EMMC Test ============
EMMC Pattern Test(0x5A5A):
FAILED!!
============================================================================================
is it an EMMC problem? Needed to be replaced or what ??
Help Needed ... Thanks in advance
?
any one ??
PLZ