Database Info

Can someone guide me.

I'm looking for a ROM with very few bugs as well as the following features built in.
Lock screen Notifications (as well as active display)
Blurred home screen (if it is possible)
Sent from my XT1032

Try mokee rom (release 29/7) with "The green machine kernel". I have no bugs at the moment. There are people saying that camera doesn't work but for me everything is OK.

Clarkiieh said:
I'm looking for a ROM with very few bugs as well as the following features built in.
Lock screen Notifications (as well as active display)
Blurred home screen (if it is possible)
Sent from my XT1032
Click to expand...
Click to collapse
Spirit Rom has these features and looks very solid and stable, but I am pretty new on the Moto G sceen.

How To make notification LED work with Light Flow while screen on?

I'm trying to get the notification LED to work while the screen is on.
I've managed to get it working while the screen is off. While that is nice, I want it to work while the screen is off too. I've found this guide and tried it, but it doesn't work on my OPO, which has a different ROM version. I have Xposed and XLED installed.
My situation:
Light Flow Legacy
Omnirom 6.0.1-20160116-find7op-HOMEMADE
Does anybody know a way to get the screen on notification led working? I know it must be possible, because when the phone setting is enabled to show the LED while charging, it does show while screen on or off. However, Light Flow notifications only show while the screen is off.

erikieperikie said:
I'm trying to get the notification LED to work while the screen is on.
I've managed to get it working while the screen is off. While that is nice, I want it to work while the screen is off too. I've found this guide and tried it, but it doesn't work on my OPO, which has a different ROM version. I have Xposed and XLED installed.
My situation:
Light Flow Legacy
Omnirom 6.0.1-20160116-find7op-HOMEMADE
Does anybody know a way to get the screen on notification led working? I know it must be possible, because when the phone setting is enabled to show the LED while charging, it does show while screen on or off. However, Light Flow notifications only show while the screen is off.
Click to expand...
Click to collapse
Not related to your question but get on the Omni nightlies there are some great new additions to the ROM. Don't dirty flash from a homemade though. Clean flash and go through settings, Advanced, more, phone app etc. Also you can edit power profiles with your own CPU and GPU settings for specific apps.
I've never seen a way to have light flow work with screen on. I bought the app ages ago but don't use it ?
Sent from my A0001 using Tapatalk

Renosh said:
Not related to your question but get on the Omni nightlies there are some great new additions to the ROM. Don't dirty flash from a homemade though. Clean flash and go through settings, Advanced, more, phone app etc. Also you can edit power profiles with your own CPU and GPU settings for specific apps.
I've never seen a way to have light flow work with screen on. I bought the app ages ago but don't use it
Sent from my A0001 using Tapatalk
Click to expand...
Click to collapse
Where do I find the nightlies then? I thought I had the latest installed, because I found a thread mentioning the latest stable release being from 2015, so I figured the homemade version I have from 2016 was the latest. However, searching some more yielded http://dl.omnirom.org/find7op/ . Are those the actual nightlies you're talking about?

erikieperikie said:
Where do I find the nightlies then? I thought I had the latest installed, because I found a thread mentioning the latest stable release being from 2015, so I figured the homemade version I have from 2016 was the latest. However, searching some more yielded http://dl.omnirom.org/find7op/ . Are those the actual nightlies you're talking about?
Click to expand...
Click to collapse
Yes those are the ones I'm surprised you replied in the nightlies thread but are still on the homemade builds. Get the latest one and clean flash preferably you won't be disappointed and don't freeze advanced there are some options in there you can try
Sent from my A0001 using Tapatalk

Won't work

CM13 Z5P E6853 Beta -- Updated NegaSpork

This is a no-frills thread.
Okay here it is.
cm_satsuki-Nega_Spork.zip
For dsds testing: cm_satsuki_dsds_test_boot.img Note: you will see the Sony Bootanimation instead of CM13, this is intentional. Also detection may take a minute or two. Provide clear reports.
For dsds model owners, flash rom clean, then in recovery reboot to bootloader and flash this test boot.img with fastboot
Code:
fastboot flash boot cm_satsuki_dsds_test_boot.img
fastboot reboot
NegaSpork
Working:
Sim [single]
Storage
NFC
Audio record fixed
The rest is the same.
What doesn't work:
Since the camera is still not "fixed" we will just say it doesn't work, deal with it.
Next on my todo list is fmradio
DSDS support is still being worked out by the project members. [see test boot image above]
NOTE: OpenGapps may bug out quickpanel/pulldown menu. This may be related to version used.
I experienced this with pico and nano. [see note below]
Click to expand...
Click to collapse
Thanks @KbaB.BroS for testing :good:
Everything from before works, cell, mobile data, nfc, etc.
Internet speeds are good.
It feels snappier than before, so smooth
The pulldown bar works, I can interact with the toggles without any force closes. If somebody complains about their devices, let them know to use OpenGAPPS. I use the mini version
Click to expand...
Click to collapse
Cyanogenmod Source
Thanks to/for
@CTXz Sources and convincing me to get a Z5P instead of another Sammy device.
Sony Kitakami Platform Developer Organization
@zacharias.maladroit For answering questions, many questions. :silly: [ still have more... xD ]
Those of you without a sense of humor, go away.
Okay current features i'm working on and stuff that works/doesn't work
UVC support enabled in kernel. probably need to build rom-side support still. libuvc avutils etc.
- This is for plugging in camera devices in conjuction with apps like LegitDashcam.
USB Gadget functionality as per pelya's work ,
- pelya/android-keyboard-gadget Use in conjuction with the include USB Keyboard app to utilize your phone as a keyboard/mousepad.
I am working my kernel source here toward net-huntery goodness.
The rest you tell me, and you tell me properly. Messages like
"waahhh my whatchamhoozit is all floompy"
are not acceptable.
This is not a random discussion thread either. Idle chatter belongs in general.
This is also NOT a discussion thread for Xposed,Viper, etc..
Thank you.
m

Notes and Updates
NOTE
I have been running this build for two days now and so far , meh it's alright.
Audio [mic] and Camera issues are definitely annoying.
SELinux is COMPLETELY disabled on this build. If You want security go back to stock.
SELinux enforcing is the goal though.
I strongly recommend using a "traditional" root os SuperSU over systemless-root.
Reasons:
Opengapps requires a factory-reset or fresh install to set up correctly!
Privacy Guard based root sucks. It forgets alot of permissions granted.
Use BETA-SuperSU-v2.52 , I wil attach below as it seems hard to find by conventional means.
Would have posted earlier but needed a smoke break *>cough<* :silly:

Updates and Notes
Reserved

Attached UPDATE-SuperSU-v2.46.zip for another option ,
since that worked the best for me in the past.

Thanks for the input. I get error: 7 to install the .zip file
any solution?

Rubensss said:
Thanks for the input. I get error: 7 to install the .zip file
any solution?
Click to expand...
Click to collapse
You need to use the recovery @moonbutt74 compiled from his other thread.
Sent from my Z5 Premium using XDA Labs

KbaB.BroS said:
You need to use the recovery @moonbutt74 compiled from his other thread.
Sent from my Z5 Premium using XDA Labs
Click to expand...
Click to collapse
Thanks , I have already installed.

@moonbutt74
Would be easier to keep the ROM as daily and test if it supported the dual sim version phones too
Apart from that, some of my observations during a small period of usage :
Pardon me if these are already mentioned.
Screen brightness doesn't reach full capacity
Speaker volume is low I think
For me, I felt the display had some slight glitches. Enabled GPU rendering in developer settings and felt it got better , can't guarantee on this though
Had to revert to stock based since sim functionality for me wasn't available ( I have a dual sim phone)

Ashray_Vk
Okay good deal, umm let me try compiling a seperate kernel package.
Yep brightness is currently HORRIBLE
I didn't notice any glitches display-wise, do you actually mean lag in some screen transitions?
I only tested with radioball and raging thunder.
The build i just tested out had full WOW, HOW THE HELL DO I TURN THIS DOWN BRIGHTNESS. :silly:
So either atm i get crappy brightness as max level which is like 75% of stock.
Or i get the nice stock brightness but the slider breaks/doesn't work.
The speaker volume is limited to where it actually should be. Use a mediaplayer that has an option for software decoding, that is a 100% [double] boost. It's not the idea to bomb out the speakers by default, each user can find their own tweak.
m
On the "daily build" thing, my upload time is horrible, so i will not be pushing out excessive/pointless builds. when i have something else fixed, then i will upload another build. Currently i'm boxing with the brightness issue and getting the mic working for audio recording.

moonbutt74 said:
Ashray_Vk
Okay good deal, umm let me try compiling a seperate kernel package.
Yep brightness is currently HORRIBLE
I didn't notice any glitches display-wise, do you actually mean lag in some screen transitions?
I only tested with radioball and raging thunder.
The build i just tested out had full WOW, HOW THE HELL DO I TURN THIS DOWN BRIGHTNESS. :silly:
So either atm i get crappy brightness as max level which is like 75% of stock.
Or i get the nice stock brightness but the slider breaks/doesn't work.
The speaker volume is limited to where it actually should be. Use a mediaplayer that has an option for software decoding, that is a 100% [double] boost. It's not the idea to bomb out the speakers by default, each user can find their own tweak.
m
On the "daily build" thing, my upload time is horrible, so i will not be pushing out excessive/pointless builds. when i have something else fixed, then i will upload another build. Currently i'm boxing with the brightness issue and getting the mic working for audio recording.
Click to expand...
Click to collapse
By screen glitches, I meant that I saw a few glitches when I scrolled down menus ( like even settings app).
Might be just my sleepy eyes too, lol. And in the beginning, everything was feeling laggy, till I enabled those GPU options in the developer settings and turned the screen off and turned it back on.
Don't rely on this data though, I hope someone else verifies this thing before you take it up as an issue .
-Ash

Ashray_Vk said:
By screen glitches, I meant that I saw a few glitches when I scrolled down menus ( like even settings app).
Might be just my sleepy eyes too, lol. And in the beginning, everything was feeling laggy, till I enabled those GPU options in the developer settings and turned the screen off and turned it back on.
Don't rely on this data though, I hope someone else verifies this thing before you take it up as an issue .
-Ash
Click to expand...
Click to collapse
No problem I'm just looking for clarification, are you talking about lag or screen tearing?

moonbutt74 said:
No problem I'm just looking for clarification, are you talking about lag or screen tearing?
Click to expand...
Click to collapse
There was lag in the beginning, no doubt. Lag was there since the boot animation itself.
Yes! Screen tearing is the term i was searching for. I felt like I saw minor issues of screen tearing along with the lag. ( especially when I scrolled down the settings )
I'm so sorry if I am not able to make things clear.

Nice. My question is does it work well with xposed? Other rom gives me random soft reboot randomly
Sent from my E6853 using XDA-Developers mobile app

Killastyle said:
Nice. My question is does it work well with xposed? Other rom gives me random soft reboot randomly
Sent from my E6853 using XDA-Developers mobile app
Click to expand...
Click to collapse
K,
right now we are working on an Alpha build, self evident in thread title. Xposed being superfluous/unecessary is not being discussed in this thread. Of course later on in the release/beta level thread it will most likely be covered.
@KbaB.BroS
On the good side got brightness and auto brightness sorted.
@Ashray_Vk , give me a bit on the dsds kernel, from what I'm understanding SS an DS were supposed to have been combined, so I am running a fresh build after resync, which on my comp will take a day :silly: adn probably not as long as the actual upload
:laugh:
m

moonbutt74 said:
K,
right now we are working on an Alpha build, self evident in thread title. Xposed being superfluous/unecessary is not being discussed in this thread. Of course later on in the release/beta level thread it will most likely be covered.
@KbaB.BroS
On the good side got brightness and auto brightness sorted.
@Ashray_Vk , give me a bit on the dsds kernel, from what I'm understanding SS an DS were supposed to have been combined, so I am running a fresh build after resync, which on my comp will take a day :silly: adn probably not as long as the actual upload
:laugh:
m
Click to expand...
Click to collapse
Normally, if I'd flash a stock based ROM which was meant for single sim, one sim would work in the dual sim models but the memory card would be not detected . sadly, that wasn't the case with cm though. Not even a single sim gets detected.

Ashray_Vk said:
Normally, if I'd flash a stock based ROM which was meant for single sim, one sim would work in the dual sim models but the memory card would be not detected . sadly, that wasn't the case with cm though. Not even a single sim gets detected.
Click to expand...
Click to collapse
you tried enabling only single SIM mode in Sony's (or other) "Stock" ROM and then flashing this ROM ?
Then at least one SIM might work - unless of course the Z5 devices handle things entirely differently

zacharias.maladroit said:
you tried enabling only single SIM mode in Sony's (or other) "Stock" ROM and then flashing this ROM ?
Then at least one SIM might work - unless of course the Z5 devices handle things entirely differently
Click to expand...
Click to collapse
Um, actually, was running rom aur and then had disabled one sim ( just because i didnt want to use that sim) and then had flashed this.
Unfortunately, not even a single sim worked in this.

Killastyle said:
Nice. My question is does it work well with xposed? Other rom gives me random soft reboot randomly
Sent from my E6853 using XDA-Developers mobile app
Click to expand...
Click to collapse
No problem with XPosed for some time here

Updated Build
CM13 Z5P E6853 Somehwere in Alpha -- Updated DragonLady
see OP , OH! and READ IT. grrrrrrr
Please verify communications are functioning, sim detection, in-call mic working etc.
Is your model SS or DS? Please state model number.
Brightnes and auto brightness should be fixed.
External storage fixed
Re-introduced kcal support in kernel
Included system apps [free, and free versions] - as we are testing , some creature comforts.
Adaway.apk
HKB.apk <--- hacker's keyboard
HKNDCTRU.apk <--- hacker's keyboard cyrillic/russian support
KernelAuditor.apk
NetworkDiscovery.apk <--- fairly useful network discovery app, find it on fdroid
NovaLauncher.apk
OpenCamera.apk
PicuriRam.apk
Quickpic.apk
Rebooter.apk
Superuser.apk <--- enable developer options and root access via that way first, then run supersu and update.
Terminal.apk < jackpal terminal
TotalCommander.apk
USB-Keyboard.apk
USBKB.apk < this one and the one above are the same app, i dun goofed.
Wifitoggle.apk
i am working a vanilla cm13 as well as my own custom build in the same turn, the custom utility in sbin is ccrypt, if you want to know how to use it, pm me and i'll give you a break down. do not use it to encrypt a block device !! single files only, and do not use a generated key, use a memorizable alpha-numeric password, else leave it alone.
m
@zacharias.maladroit WHAT HAPPENED TO PERRY !?!?!?!? :crying:

@moonbutt74
I'm sort of wiping the slate clean in several areas of my life - and that (unfortunately) was part of it :angel:

Missing tweaks

Hello Everyone,
I'm fresh owner (bouth a week ago) of Honor 9 and I'm very happy with the choise I've made. The phone is incredible fast (comparing from my previous Galaxy S6) and EMUI is well optimised. But, ehm let's complain a bit . I'm courious what kind of feature you're missing on your Honor 9 phone/EMUI. For me the complaining list would look like:
- Missing ability to control notification light - different freq. and color for different apps
- Gesture for home button - there would be nice if "scroll up/down" would trigger to enroll notification arean
- Dim clock as screensaver while charging (very usefull as I'm charging my phone while sleeping, and so could be use as night clock)
- Knock Knock feature on locked phone - to see notification when phone is on the table (I know there is notification LED for it)
Ok that's my complaining list. If you have any idea to overcome such a limitation feel free to suggest. Also don't hesitate to complain a bit as well
z4nD4R
Y

I don't think there is a way to over come your complaints without rooting your device. Even rooting your device won't allow you to use the features you want on the home button.

iceepyon said:
I don't think there is a way to over come your complaints without rooting your device. Even rooting your device won't allow you to use the features you want on the home button.
Click to expand...
Click to collapse
Hi iceepyon,
yes I believe you're right, there the missing feature about home button won't be most probably overcome without ROOTing the device and use custome KERNEL. To by honest with you I'd rather to not use the feature as some application I'm using won't run on ROOTed phones (based on official statements).
Hovewer I believe some of missing feature could be added by some app?Any recommendation?
z4nD4R
Y

[email protected] said:
Hello Everyone,
I'm fresh owner (bouth a week ago) of Honor 9 and I'm very happy with the choise I've made. The phone is incredible fast (comparing from my previous Galaxy S6) and EMUI is well optimised. But, ehm let's complain a bit . I'm courious what kind of feature you're missing on your Honor 9 phone/EMUI. For me the complaining list would look like:
- Missing ability to control notification light - different freq. and color for different apps
- Gesture for home button - there would be nice if "scroll up/down" would trigger to enroll notification arean
- Dim clock as screensaver while charging (very usefull as I'm charging my phone while sleeping, and so could be use as night clock)
- Knock Knock feature on locked phone - to see notification when phone is on the table (I know there is notification LED for it)
Ok that's my complaining list. If you have any idea to overcome such a limitation feel free to suggest. Also don't hesitate to complain a bit as well
z4nD4R
Y
Click to expand...
Click to collapse
- most phones nowadays don't have notification light. Probably because the phone spend most of its time in our hands
- I agree with this one. The fingerprint scanner supports swiping gesture
- honor 9 uses ips lcd screen, even if its dimmed, the whole screen still light up. This will heavily drain the battery
- you can use wave on proximity sensor app to turn the screen on

pijes said:
- most phones nowadays don't have notification light. Probably because the phone spend most of its time in our hands
- I agree with this one. The fingerprint scanner supports swiping gesture
- honor 9 uses ips lcd screen, even if its dimmed, the whole screen still light up. This will heavily drain the battery
- you can use wave on proximity sensor app to turn the screen on
Click to expand...
Click to collapse
@pijes,
1. Maybe most of the phones doesn't have notification LED (wouldn't be so sure about this one), but Honor 9 does, so ability to control it would be usefull
2. Yeah would be nice, but dunno if if is possible withou kernel upgrading
3. Yes, could be battery dainer, but I'm speaking about situation when the phone is charging actually
4. Can you explain a bit deeper the statement, about to using "waze on proximity sensor app"?
Thx
Y

[email protected] said:
@pijes,
1. Maybe most of the phones doesn't have notification LED (wouldn't be so sure about this one), but Honor 9 does, so ability to control it would be usefull
2. Yeah would be nice, but dunno if if is possible withou kernel upgrading
3. Yes, could be battery dainer, but I'm speaking about situation when the phone is charging actually
4. Can you explain a bit deeper the statement, about to using "waze on proximity sensor app"?
Thx
Y
Click to expand...
Click to collapse
3. Charging and discharging simultaneously can be harmful to the battery health
4. There are a few apps out there that try to simulate the wake screen using gestures and usually they implement it by making use of the proximity sensor. AcDisplay, WaveUp and Glance Plus are among them

[email protected] said:
Hovewer I believe some of missing feature could be added by some app?Any recommendation?
Click to expand...
Click to collapse
Well, there is honestly nothing much which can be done if you want to add the knock on wake feature. Same can be said of the notification LED as those are built into the device's official stock OS. The only thing you can do is install a 3rd party OS and hope that it has some of the features you want. However be warned that most if not all 3rd party OSes do not have the best post image processing software so your pictures won't turn out as good as if you have taken them using the stock OS that came with your device.

@iceepyon, yes I can imagine that most 3rd party OS won't have such a camera software optimalization. Btw, I've read some post about how to enable 3rd party clock as screensaver. I can't understand why Honor/Huawei disabled this feature, which is present in stcok android.
Y

[email protected] said:
@iceepyon, yes I can imagine that most 3rd party OS won't have such a camera software optimalization. Btw, I've read some post about how to enable 3rd party clock as screensaver. I can't understand why Honor/Huawei disabled this feature, which is present in stcok android.
Click to expand...
Click to collapse
Probably due to security issues. As Huawei has been focusing quite allot on making and keeping their devices secure.

@iceepyon, I really don't know how "clock" screensaver would expose the security more than "image slideshow" screensaver
Y

[email protected] said:
@iceepyon, I really don't know how "clock" screensaver would expose the security more than "image slideshow" screensaver
Y
Click to expand...
Click to collapse
If you are using a 3rd party widget. There is a possibility that the widget may have certain permissions that could cause a issue.

iceepyon said:
If you are using a 3rd party widget. There is a possibility that the widget may have certain permissions that could cause a issue.
Click to expand...
Click to collapse
@iceepyon, I believe that's problem with all 3rd party applications Its matter of trust in Google Play. I found this tutorial to set custom screensaver on Huawei devices: https://www.xda-developers.com/how-...ver-on-huawei-and-honor-devices-running-emui/
What do you think, would it work for Honor 9?
Y

[email protected] said:
@iceepyon, I believe that's problem with all 3rd party applications Its matter of trust in Google Play. I found this tutorial to set custom screensaver on Huawei devices: https://www.xda-developers.com/how-...ver-on-huawei-and-honor-devices-running-emui/
What do you think, would it work for Honor 9?
Y
Click to expand...
Click to collapse
Ummmm. Probably. Personally I wouldn't as you could easily mess up the settings on your device.

iceepyon said:
Ummmm. Probably. Personally I wouldn't as you could easily mess up the settings on your device.
Click to expand...
Click to collapse
That's right, but with 90% of advices/topic here on `xda` you can easily mess up your device settings, isn't that true? Anyway thank you for your opinion.
Is there anybody esle whou'd like to complain a bit?
Y

[email protected] said:
Is there anybody esle whou'd like to complain a bit?
Click to expand...
Click to collapse
That is certainly true of rooting or installing custom OSes onto your mobile device. As there are so many things which can go wrong. However current versions of android are now at a point where unless you need to have your device rooted for work purposes. There really isn't a point for the average user to do so.

How to fix ambient light sensor on a Treble GSI ROM?

Hi!
I have installed Resurrection Remix 8.6.4 GSI on my SM-T590.
After a few hours of testing, seems like all the functions I need are working except one, the automatic brightness setting. The sensor (CM3323E) is detected in sensor testing apps, also they can read the light value. Automatic brightness icon shows up next to the brightness slider, but it doesn't do anything, no new logcat messages are produced when I tap the icon.
Also, I have issues with WiFi and Bluetooth quick setting toggles. If the status bar icon shape is set to circular, and I tap one of them, SystemUI crashes because of a Resources$NotFound exception. I think this isn't related to the brightness sensor, more like a ROM bug, but who knows.
Where should I start debugging? I'm relatively new to Android development.

UDPSendToFailed said:
Hi!
I have installed Resurrection Remix 8.6.4 GSI on my SM-T590.
After a few hours of testing, seems like all the functions I need are working except one, the automatic brightness setting. The sensor (CM3323E) is detected in sensor testing apps, also they can read the light value. Automatic brightness icon shows up next to the brightness slider, but it doesn't do anything, no new logcat messages are produced when I tap the icon.
Also, I have issues with WiFi and Bluetooth quick setting toggles. If the status bar icon shape is set to circular, and I tap one of them, SystemUI crashes because of a Resources$NotFound exception. I think this isn't related to the brightness sensor, more like a ROM bug, but who knows.
Where should I start debugging? I'm relatively new to Android development.
Click to expand...
Click to collapse
How dit u get gsi's to work on the sm-t590?
Tab a 10.5 right?

Mikxx said:
How dit u get gsi's to work on the sm-t590?
Tab a 10.5 right?
Click to expand...
Click to collapse
Yea, I have Tab A 10.5 (2018), SM-T590.
Basically I installed TWRP from here: [RECOVERY][ROM][ROOT][UNOFFICAL] TWRP 3.3.1-0 + Lineage [SM-T590/SM-T595/SM-T597] | XDA Developers Forums (xda-developers.com)
Then I just downloaded some GSIs and flashed them to see which one works, with some changes to the original post. I may create an updated guide for installing GSI ROMs using MrHomebrew's TWRP without having to mess with SD cards, etc, but you can follow the original guide to have a mostly working system.
You can download ROMs from here: Generic System Image (GSI) list · phhusson/treble_experimentations Wiki · GitHub
I'm still not sure about how that A-only / AB thing works, if you have updated to Android 10 on stock system, AB ROMs with A64 binder will run.