Flash notifications for Samsung Galaxy J510 - Android Apps and Games

Flash Notifications
This is an app which lets you use your phone's flash as a notification LED. As you might notice our phone doesn't have a notification LED but instead it has a flash light next to the selfie camera. Whenever you get a notification and your screen is turned off, the app will blink the flash light until you dismissed them all. For the sake of battery life the delay between the blinks is increased over time which means the longer you leave your phone alone the rarer a blink will occur.​
WHAT IS WORKING NOW
As soon as you get a notification and your screen turns off the phone's selfie flash starts blinking
The notifications are paused when you turn your screen on
The blinking is stopped if you dismiss all of the notifications
PLANS FOR FUTURE
Let the user select the which apps should use flash notifications
Let the user switch between front and back facing flash
Define blinking patterns for individual apps
Make the settings exportable into storage or cloud
I have an alpha build ready for testing. It requires you to run at least Marshmallow on your device. I tested it on my J510FN and it seems to be working fine. It might just crash on other devices so be careful.
DISCLAIMER
This app comes freely WITHOUT ANY KIND OF WARRANTY! I don't take any responsibility for the damages it might cause (data loss/missed alarms because the battery died too fast/you being fired because you were late from work)! This is an alpha release!
USE AT YOUR OWN RISK!
XDA:DevDB Information
Flash Notifications, App for all devices (see above for details)
Contributors
szabolcsx
Version Information
Status: Alpha
Created 2016-11-20
Last Updated 2016-11-20

Related

[APP][FREE][2.2+] IntelliCover - Proximity Sensor Based Screen Control (And MORE)

Finally got my app up and running on the Market and being a die hard xda user, I thought it would only be appropriate to post it here for fellow users to enjoy. =)
IntelliCover is a utility which uses your device’s proximity sensor to control its display and allow fast and efficient access to your phone or tablet.
It turns the screen turns off automatically when you put your device in your pockets, close its flip cover, store the device in a bag, or even just leave the device facing down on a table. As soon as the device is back in your hand the proximity sensor is triggered again, the screen turns back on and your phone is instantly ready for use.
IntelliCover is more feature-filled than any other similar application on the market. And the best part? It's FREE!
Click here to visit the market page and download the app for free
P.S. If you find a bug, I'd appreciate if you could report it to me before giving a bad rating because it usually only takes me less than a day to fix.
*** Features ***
Calibration:-
Proximity Sensor Delay – Add a delay to the time takes to trigger the sensor and turn the screen off.
Application Settings:-
Automatic Unlock – Automatically dismiss the Unlock Screen, provided there is no password. *Experimental*
Disable in Landscape Mode – Disable the proximity sensor when an application is in landscape mode.
Go to Home Screen – Show the home screen when the screen turns on.
Screen Off Only – The screen will turn off but not on when the proximity sensor is triggered.
Screen On Only – The screen will turn on but not off when the proximity sensor is triggered.
Start on Boot – Automatically start the IntelliCover service when the device turns on.
Notifications:-
Proximity Warning – Vibrate every time the proximity sensor is triggered.
Status Bar Notification – Show an ongoing notification in the status bar.
Screen On and Off Actions:-
Airplane Mode – Enable or disable airplane mode.
Auto Rotate (will be removed) – Activate or deactivate.
Auto Sync – Activate or deactivate auto-sync.
Bluetooth – Enable or disable Bluetooth.
Haptic Feedback (will be removed) – Activate or deactivate haptic feedback.
Ringer Mode – Switch ringer mode to Normal (Sound with Vibration), Vibrate or Silent.
Wi-fi – Enable or disable wi-fi.
*** Frequently Asked Questions ***
Q) Is it really free? Where are the ads?
Ans) IntelliCover is completely free and has no ads whatsoever!
Q) Do I require a rooted device to use IntelliCover?
Ans) Nope. IntelliCover works on all supported phones and tablets, rooted or unrooted.
Q) Doesn’t using the proximity sensor consume a lot of battery?
Ans) Actually, the proximity sensor consumes minimal power, almost little enough to be insignificant.
Q) What are the ‘Screen On’ and ‘Screen Off’ actions?
Ans) IntelliCover allows you to set events to be triggered when the screen turn on or off. For example, by setting wi-fi to turn on when your screen turns on and setting it to turn off when the screen turns off, you could save a huge amount of battery power.
Q) Can I request a feature?
Ans) Of course! Head over to the Contact section to drop me an e-mail.
Q) Why does IntelliCover keep running in the background?
Ans) It has to run in the background to know when the proximity sensor is triggered.
Q) Can I donate to the developer?
Ans) Not yet but hopefully I’ll have something set up soon.
*** Permissions Required ***
INTERNET - Required for error logging (to send crash reports)
WAKE_LOCK - Required to unlock screen
WRITE_SETTINGS - Required to toggle ringer mode
VIBRATE - Required to vibrate phone
RECEIVE_BOOT_COMPLETED - Required to detect phone boot
WRITE_SYNC_SETTINGS - Required to toggle autosync
READ_SYNC_SETTINGS - Required to toggle autosync
BLUETOOTH - Required to toggle bluetooth
BLUETOOTH_ADMIN - Required to toggle bluetooth
ACCESS_WIFI_STATE - Required to toggle WiFi
UPDATE_DEVICE_STATS - Required to toggle WiFi
CHANGE_WIFI_STATE - Required to toggle WiFi
*** Contact ***
Feel free to contact me at [email protected] with any issues, bug reports, feature requests, suggestions or queries. Please read the FAQ above before sending an e-mail to avoid redundancy.
Click here to visit the market page and download the app for free
Hello! I love the app! I just installed it, and it works great so far keep up your good work!
Sent from my HTC Sensation Z710e using xda premium
Seems good, some questions though.
1. Is it supposed to be able to turn the screen on? Take phone out of pocket, proximity sensor detects values that indicate there's nothing near (Sorry, dunno how / what values are calculated / used) and viola, screen on?
2. Dunno if I've set it up incorrectly. But, currently, if I turn on my screen, via the power button (Sony Xperia S), the stock lockscreen will show, and either one of two things will happen. Either I unlock it successfully, and the split second I'm completing the unlock, the phone will screen off, and engage the lockscreen - after unlocking this, can I get into my phone. OR it'll do what I've previously mentioned, without input.
timmy-kidd said:
Hello! I love the app! I just installed it, and it works great so far keep up your good work!
Sent from my HTC Sensation Z710e using xda premium
Click to expand...
Click to collapse
Thanks! Glad you liked it! =)
Profool said:
Seems good, some questions though.
1. Is it supposed to be able to turn the screen on? Take phone out of pocket, proximity sensor detects values that indicate there's nothing near (Sorry, dunno how / what values are calculated / used) and viola, screen on?
2. Dunno if I've set it up incorrectly. But, currently, if I turn on my screen, via the power button (Sony Xperia S), the stock lockscreen will show, and either one of two things will happen. Either I unlock it successfully, and the split second I'm completing the unlock, the phone will screen off, and engage the lockscreen - after unlocking this, can I get into my phone. OR it'll do what I've previously mentioned, without input.
Click to expand...
Click to collapse
Yup, it turns the screen on as well. The values are pretty much just FAR and NEAR for most proximity sensors, so once it detects that there's no object close to it, it should turn the screen on. If it's not turning on at all, that might be the root of the problem i.e. it might be causing the unlock issue as well...Hmmm...I checked out your phone specs and since you said "stock lockscreen", I think it's safe to assume you're on the stock ROM but are you still on Gingerbread? If so, that partially explains the issue. Some Gingerbread ROMs have compatibility issues with the app that are very similar to what you've described, I have no idea why but I'm still looking into it. I had to fix ALOT of Gingerbread issues to get it working this far lol. If you're not on GB though, I guess I need to hunt for an Xperia and begin testing/debuggin. :fingers-crossed:
HUGE update released! V2.0 Hope you all like it. =)
Thanks a lot for sharing your app, it looks grate but unfortunately it is not working with my Galaxy note 10.1
Sent from my GT-N8000 using XDA Premium HD app
I like it! Works fine in my SII stock rom. It will be perfect if i could enable a sound notification when turns off the screen. Not really necessary but cool 4 me (car unlock beep-beep)
Thanks mate!
Frank
thanks for the update
working good.
I'm working on adding a widget and changing the design, but if anyone has any better suggestions, I'd love to hear them because design is not as important as functionality.
Love it. great app, and working fine on both my LG Optimus 3D and Samsung Galaxy Note II.
could we have a choice on the notification icon, would be nice to have a small black dot or something. i just like a empty notification bar but understand the need for it to actually be in the notification bar
thanks
other than that this is my fav ap on my phone
won't this drain battery
mikeschevelle said:
could we have a choice on the notification icon, would be nice to have a small black dot or something. i just like a empty notification bar but understand the need for it to actually be in the notification bar
thanks
other than that this is my fav ap on my phone
Click to expand...
Click to collapse
Yea, it's unfortunate that foregrounding requires the notification icon. You could try using the app without foregrounding, it works for some people. Adding more notification icons should be easy, won't take much time. =) Which ones do you think I should add? A small black dot would disappear on most black status bars (but it'll look like there's an empty space in the status bar so it'll look a little weird)...
skyrocketeer said:
won't this drain battery
Click to expand...
Click to collapse
The proximity sensor uses very little battery and the app itself is pretty light (4-5MB RAM). So far I've only gotten one deep sleep complaint out of 3500+ downloads but no battery issues.
im fine with the black dot, it will keep my bar looking empty
mikeschevelle said:
im fine with the black dot, it will keep my bar looking empty
Click to expand...
Click to collapse
Finally! Found a way to completely remove the icon and the notification from the status bar when the app is foregrounded. It'll be in the next update (today or tomorrow). It can still be enabled manually from the Notifications section but yea, enjoy the emptiness of your status bar. xP
Pretty Huge Update. Hope you like it!
Version 3.0
-Added Screen On Fix for some phones (Enable in settings)
-Status Bar Notification/Icon will no longer automatically show up when app is foregrounded.
-Added Pocket Mode
-Added Table Mode
-Added Widget
-Fixed Screen On/Off Actions bug
One thing I notice (which is NO WHERE CLOSE to a big deal)
The launcher I use (Nova) I hide the status bar and use a gesture to bring it down. When ever Intellicover turns the screen on, the status quickly shows itself and then goes back hidden, not more than a half second of this, but I cannot select anything on the screen until after that status bar thing happens
I like the concept of the app, and it works fine with my sensors. I have one complaint though, I don't like how when the phone screen turns on, it opens to the Intellicover App. Sure I can set it to go to the home screen, but I don't always want that. Once Intellicover is running, I don't want to ever see it again unless I manually launch it from the app drawer. If I have Chrome open and I have to suddenly put my phone down or in my pocket, I'd like to pull my phone back out and have Chrome still be on the screen, just like happens now using the sleep button.
Turns my dumb flip cover on my note 2 into a smart cover. Thanks
Sent from my SPH-L900 using xda premium
garfnodie said:
I like the concept of the app, and it works fine with my sensors. I have one complaint though, I don't like how when the phone screen turns on, it opens to the Intellicover App. Sure I can set it to go to the home screen, but I don't always want that. Once Intellicover is running, I don't want to ever see it again unless I manually launch it from the app drawer. If I have Chrome open and I have to suddenly put my phone down or in my pocket, I'd like to pull my phone back out and have Chrome still be on the screen, just like happens now using the sleep button.
Click to expand...
Click to collapse
Actually, that shouldn't be happening. Once set you never have to see it again. I'm not quite sure what could be triggering this but if you could provide a little information about the OS/phone model/etc. I could try to get a hold on the device and try to replicate the error...

[Q] LED Notification Light inconsistent

I've just got this device 3 days ago~ And i noticed that my led notification light hasnt been consistent or light up at all unless i use Light Flow but even with Light Flow its still inconsistent. I'm on stock KitKat 4.4.4 never rooted etc. Pulse notification led is on.
Without lightflow it just doesn't light up at all for applications like whatsapp,wechat,games(Does the led light up for games too?). Whenever i receive a phone calls however it lights up white for a split second and then it turn itself off.. If i don't pick it up, it doesn't light up to show me that i have a missed call either, but when i turn the screen on, it lights up for a split second and then turn itself off again.
Using lightflow , i haven't get to try it with whatsapp yet but for charging and phone calls it works great but for wechat it only works if i have the screen on. If the screen is off nothing lights up and when i turn on the screen by pressing the power button and then put it to sleep again it works. I have the run in foreground on,Reduce wake on(not sure if i need that), and Nexus 5 force LED Reset.
Also since i'm already here, how long does it takes for google to fix the lollipop if at all? Should i update it to see if the led works on lollipop? Does OTA update introduce problems and bugs? Sorry if my questions are too long and my english is bad.

Can an Android Rear Flash LED Brightness Intensity be Modified?

is it technically/physically/electronically possible that the LED camera Flash on the back on the Android phones be run at lower brightness intensity by software? - I mean as I understand it the 'flash' is not a xenon flash, its just an ordinary light emitting diode (LED) but just a very high brightness LED - but all the same like any other LED it should technically therefore support different brightness settings (even if only down to 10% of its full brightness) should it not? maybe by the software applying different lower voltages to the LED in the particular app?
The reason I ask is that I prefer to use flash call alert apps and these tend to use the rear camera flash (some use front screen display as well but I prefer to divert the alert to flash the camera flash light instead of the screen) so in all of these flash alert (for ringing/missed call/ unread SMS) that I have ever tried from Google Play not one of them has ever featured a way to lower the brightness of the LED Flash to a lower percentage of brightness - is this because there is no way technically to lower the brightness of the camera LED and that there is only 2 operational modes of Totally off or Totally on, full brightness of the LED state only or have app developers not realised that it would be a useful feature of their app? - I have my mobile phone in my shirt pocket most of the time, its a large 5.5" phone and the LED flash sits above the pocket and when the flash alert call goes off the LED flash 'blinds' the person standing across me because it flashes at full 100% brightness!
So does any technical person on XDA know if its technically possible to adjust the brightness of a rear camera flash LED? - or has anyone seen a flash alert app on Google Play where one of the features is that you can lower the brightness intensity of the flash? Thanks.
Yes
I have seen flashlight apps that allow the user to reduce the intensity of the flash LED. In fact, I used one for a while. But I'm not sure if this capability has been put into any notification apps. It also might depend on your phones hardware. My old phone was able to get that flashlight app from Google Play, but because it customizes the appstore to your phone's compatibilities, an app might not show up for you because of your phone's hardware's limitations. I'll keep my eye out for such an app though.

Flash notifications for Samsung Galaxy J510

Flash Notifications
This is an app which lets you use your phone's flash as a notification LED. As you might notice our phone doesn't have a notification LED but instead it has a flash light next to the selfie camera. Whenever you get a notification and your screen is turned off, the app will blink the flash light until you dismissed them all. For the sake of battery life the delay between the blinks is increased over time which means the longer you leave your phone alone the rarer a blink will occur.​
WHAT IS WORKING NOW
As soon as you get a notification and your screen turns off the phone's selfie flash starts blinking
The notifications are paused when you turn your screen on
The blinking is stopped if you dismiss all of the notifications
PLANS FOR FUTURE
Let the user select the which apps should use flash notifications
Let the user switch between front and back facing flash
Define blinking patterns for individual apps
Make the settings exportable into storage or cloud
Increase the list of supported devices
I have an alpha build ready for testing. It requires you to run at least Marshmallow on your device. I tested it on my J510FN and it seems to be working fine. It might just crash on other devices so be careful.
DISCLAIMER
This app comes freely WITHOUT ANY KIND OF WARRANTY! I don't take any responsibility for the damages it might cause (data loss/missed alarms because the battery died too fast/you being fired because you were late from work)! This is an alpha release!
USE AT YOUR OWN RISK!
XDA:DevDB Information
Flash Notifications, App for all devices (see above for details)
Contributors
szabolcsx
Version Information
Status: Alpha
Created 2016-11-20
Last Updated 2016-11-20
Reserved
Before releasing anything I would like to know whether is there an interest for such an app.
Reserved
Reserved 1
Reserved 2
Reserved 3

[ROM][UNOFFICIAL][12L][N7100][Samsung Galaxy Note 2][LineageOS 19.1][BETA]

Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
*/
Hi,
here you can find my version for the Samsung Galaxy Note 2 on LineageOS 19.1.
At first I want to thank @rINanDO, @ChronoMonochrome for all your work which was reused here and helped a lot.
Spoiler: Links
TWRP
ROM Android-Filehost
ROM Mega
Spoiler: Whats working
Boot
Audio
Bluetooth
Graphics
Cameras
GPS
Wifi
USB
Video playback (HW/SW)
OTA Updates
Tethering via USB, WIFI and Bluetooth
Sensors
RIL
Spoiler: Whats not working
NFC
Encryption
Maybe random reboots
SD card maybe can't formated as internal memory
Maybe more
I would recommend to use microG instead of gapps,
here you can find the installation instructions:
Spoiler: microG instructions
Download Magisk 24.1 and flash it via TWRP (yes, flash the APK file), reboot
Open Magisk and update the App (and do a reboot if it's asking)
Enable Zygisk in Magisk
Download and install microG installer in the Magisk manager, reboot
Download and install safetynet-fix in the Magisk manager, reboot
Check with a safetynet checker app and you should pass
Spoiler: Changelog
26.01.2022
08.03.2022
17.03.2022
25.03.2022
04.04.2022
19.04.2022
03.05.2022
15.06.2022
08.07.2022
22.09.2022
25.01.2023
Spoiler: How to install it?
Instructions
Wanna improve your sound configs, control your charging current and more?
Now you can use my app to access all boeffla configurations, there will follow more functions.
Exynos4 Kernel Manager - Apps on Google Play
This app provides Boeffla sound control and other kernel + charging tweaks
play.google.com
Telegramm group:
Samsung Galaxy Note II testing group
t.me
Do you like my work?
Than you can simply hit the thanks button and consider to spend me a coffee or a beer,
I'm doing this in my free time and it also costs a lot of money to buy hardware.
donate
XDA:DevDB Information
[ROM][12.x][N7100][BETA] LineageOS 19.1, ROM for the Samsung Galaxy Note 2
Contributors
html6405
Source Code: https://github.com/html6405
ROM OS Version: 12.x S
ROM Kernel: Linux 3.x
ROM Firmware Required: TWRP 3.3.0
Based On: LineageOS
Version Information
Status: Beta
Created 2021-12-30
Last Updated 2023-01-25
Alternative download link for the initial version:
File on MEGA
mega.nz
Originally posted in [ROM][UNOFFICIAL][11.0][N7100][Samsung Galaxy Note 2][LineageOS 18.1][ALPHA][TREBLELIZED]:
I just flashed the newly Android 12 LineageOS 19 build this morning.
It's currently a bit early to share my experience yet since I need some more time, but I already like to share my first impression.
First of all, I was surprised that I could just do a dirty flash over your current 18.1 dec build without any problems.
I did not perform a clean flash because I couldn't backup my Session messages, normally I always perform clean flashes.
I used TWPR 3.5.2 custom recovery to flash this ROM and only wiped Cache and Dalvik Cache/ART partition.
Everything went smooth. It didn't take too long for the first boot either.
Right after the first boot, just when it was booted, the phone rebooted.
After this reboot, I didn't encounter any random reboots yet.
Everything seems working smooth and snappy at the moment.
I can confirm that Magisk 23 is still working on this ROM. You just need to re-flash it after the first boot.
The only annoying thing I discovered is a blinking LED issue and the battery that last less longer, but that's maybe linked to the blinking LED issue.
Something I immediately noticed is that my notification LED is actually red now while charging and green when it hits 100%.
In previous 18.1 build, the LED always got a weird yellowish colour while charging.
Another thing that caught my eye was "Google Play System update" in settings.
I don't understands why it's there since it's supposed to be a degoogled ROM.
Google Play System updates is a part of the Google Play Services ecosystem.
I didn't install any GAPPS and this ROM didn't came with GAPPS pre installed.
Spoiler: What I can confirm is working
- It (re)boots correctly
- Able to receive and sending sms messages and phone calls (didn't try SIM unlock yet. I used the workaround that is mentioned in the main post)
- Camera's
- Wi-Fi (both, 2.4 GHz and 5GHz)
- Video's (YouTube in browser)
- Sensors, except compass (phone rotates correctly)
- Charge correctly to 100%
- S-pen (just as a regular styles, no button functionality)
Spoiler: What is not working + bugs
- An annoying blinking LED issue.
I never experience this before on any ROM.
Can be a coincidence, but after the battery drops below 75%, the notification LED is constantly blinking red, even when the screen is on.
I already tried to literary turn off all notifications options. I even disabled blinking LED option, but it still keeps blinking, even after a reboot. It only disappears after fully charging the phone but will come back in time.
I didn't find a way to fix this.
- Android 12 theme engine seems to be broken.
Some things like buttons (like emergency call button on lockscreen), text (search apps in launcher) and backgrounds in notifications icons in notification panel are still LineageOS teal.
Switching a wallpaper with different colours, but it doesn't change the theme colour of the device. Buttons, lockscreen clock etc. are still light blue. I try to add some screenshots to highlight this problem.
Also, the options to change the icon shape seems to be gone, even in developer settings.
Everything turned into circles after the update. Can't change it.
- USB (can't connect to pc (MTP))
- Extended screenshot beyond your screen
- There was a weird issue that my device is stuck at Samsung Galaxy II screen when turning on the device (not the LineageOS boot screen). I only had this once so can't describe how to reproduce it yet.
I just turned off my device in the power setting inside the ROM. The next time I turned on the device, it was stuck on that screen for 10 minutes. It was fixed by simply holding the power button for a while to turn off the phone.
After doing this, the phone rebooted normally again. I didn't got this issue again.
Besides the blinking LED issue, I had a very good first impression.
I really don't mind that some gimmick features are not working.
I only have this ROM for a few hours, so please keep in mind that I need more time for extensive and more in-depth testing.
Maybe there are some critical problems that I still need to discover.
I just wanted to give a quick update.
@html6405
If there are some specific things you like to try or things I need to keep an eye on, please let me know.
A big thank you to html6405 for this rom! Almost everything seems to work good.
The only thing i am missing is wake by proximity sensor. I use the app Waveup from F-droid for this. I know from trying other roms, that this is an unreliable feature. The sensor hardware is working, that much i know.
When using Lineageos 16, this is a built in feature in the rom, but it deactivates after every reboot. I have to manually turn it off and on every time to get it to work.
No big issue. Just glad to have latest Android on this device. I hope you get more appreciation from this than what you got from your Los 18.1 thread.
Let me know if you want feedback of any kind.
Happy new year!
​
It does work! I couldn't resist trying the future LOS19.
The overall impression is quite good, as the system seems to be more stable than the previous LOS18.1 for this phone. Still, the development options screen hanged a couple of times. At some point the system crashed and kept rebooting into recovery - fixed by erasing data partition. GPS works, although not well enough. The compass doesn't work in GPStest, but works in Compass app from Fdroid. I tried web browsing and viewing HD videos with Brave browser - very smooth experience. In order to access files on the phone I set up default USB mode in developer settings to files.
Two preinstalled applications are unsafe, contain trackers: camera and via. These had to be removed. Open Camera from Fdroid is installed - it works. The system web browser is preconfigured to ring Google; one may want to review its settings.
Installed Insular app (a sandbox made of the work profile) from Fdroid. The work profile works, but looses its filesystem after disabling and enabling it again. To bring the filesystem back reboot is required.
Phone encryption doesn't work, sadly. This is the same as with many previous custom ROMs for this phone.
A strange horizontal bar is seen at the bottom of the screen (nav bar home button??). Disable "Navigation hint" to get rid of it.
All together, it's an excellent result for the first attempt on LOS19. Looking forward to further releases!
Happy New Year everyone! Thank you html6405 for such an exciting present!
porcino said:
GPS works remarkably well, better than in the previous ROM, but compass doesn't work. I tried web browsing and viewing HD videos with Brave browser - very smooth experience. In order to access files on the phone I set up default USB mode in developer settings to files.
Click to expand...
Click to collapse
This are really great news, could some one else confirm that GPS is working?
I cant test it by my own...
If it's working fine, I will add it to the working list.
GPS seems to work better with "Force full GNSS Measurements" and "Use GNSS APIs" disabled in GPSTest. I also disabled "Force full GNSS Measurements" in "Developer options". From inside a room it locks on 3-5 satellites, although sometimes after a delay.
With GNSS it finds also Russian and Chinese satellites, but uses only the US constellation.
GPS performance, of course, is not as impressive as in new Samsungs, which lock on several constellations at the same time.
----------------
Added later... Still, GPS is not working well enough in this first release. It finds satellites slower than my ancient HTC DHD (ace) running cm13. Then it locks and in a moment loses the lock. I'll look into this in more detail...
porcino said:
GPS seems to work better with "Force full GNSS Measurements" and "Use GNSS APIs" disabled in GPSTest. I also disabled "Force full GNSS Measurements" in "Developer options". From inside a room it locks on 3-5 satellites, although sometimes after a delay.
With GNSS it finds also Russian and Chinese satellites, but uses only the US constellation.
GPS performance, of course, is not as impressive as in new Samsungs, which lock on several constellations at the same time.
Click to expand...
Click to collapse
Great, hopefully some one else can confirm this , you're the only person so far.
Yes indeed - working GPS very important, and needs to be confirmed by multiple sources.
But kudos to the developer for making progress on this.
hello, dear! tell me, what is the battery life? I use rr 5.8.5, the battery lasts for a day of average use. I tried to install lineage 16 - the battery was enough for several hours( now I would really like to switch to this rom, but everything depends on the battery life. thank you for the answers!
alexfire_s said:
hello, dear! tell me, what is the battery life? I use rr 5.8.5, the battery lasts for a day of average use. I tried to install lineage 16 - the battery was enough for several hours( now I would really like to switch to this rom, but everything depends on the battery life. thank you for the answers!
Click to expand...
Click to collapse
Just tried: flight mode, screen off, location off, BT and NFC off, no GApps, just sitting on the desk starting with fully charged. After half an hour the estimated battery life is 10h, 6m. Not great. The battery felt fine last night for a couple of hours of experimenting with secure messengers, then fully charged, then down to 2% by morning. I'll try uninstalling the messengers in case they are draining the battery - wait for an update.
I could not find a way of disabling the clock on the sleeping screen. It disappears after a while, but the screen power consumption is suspect.
Well, this is the first alpha release, the things with power consumption might improve soon.
----------------
Update: I found a way to disable the clock on the sleep screen and the battery life increased to 23 hours, mobile network 1% (still the flight mode is on), phone idle 1%.
The method to disable the display was to press the power button while the notification panel is open...- perhaps another bug.
porcino said:
Well, this is the first alpha release, the things with power consumption might improve soon.
Click to expand...
Click to collapse
The always on display will be turned off in the next build, this will improve the power consumption a lot.
You should be able to disable the always on display in the quick settings (AOD) and give your test a retry .
html6405 said:
You should be able to disable the always on display in the quick settings (AOD) and give your test a retry .
Click to expand...
Click to collapse
Just tried the AOD button: first enabled it and then disabled again... - it worked! Not sure, though, whether any of my previous attempts to modify the settings via adb played any role. I'll repeat timing of the battery with this setting. Thanks.
porcino said:
Just tried the AOD button: first enabled it and then disabled again... - it worked! Not sure, though, whether any of my previous attempts to modify the settings via adb played any role. I'll repeat timing of the battery with this setting. Thanks.
Click to expand...
Click to collapse
Theoretically it should be enabled by default (what I will change in the next build for sure), but anyway, it's good if you can turn it off yet.
Great news, another person confirmed with a video that GPS is working ,
so I will add it to the working list.
Nice to see, that this worked out nearly blindly, because I have no testing opportunities...
With AOD button on then off the battery life is estimated as "more than 2 days left" (flight mode, idle). Let's wait for a little longer...
-------------------
Update: after 11h it predicts "5 days left" and counting! Very good! The graph shows slightly increased power consumption in the first hour, and then it goes almost horizontal. I think it will be more than 5 days at idle, perhaps twice as many.
-------------------
Further update: after 1 day 5 hours it says 9 days left. The way the graph in Battery Usage page goes makes me think that it will last about 20 days if left idle. I don't know what caused the quick discharge in the first hour; after that the graph is a straight line pointing beyond 20 days mark...
-------------------
Yet another update: 28 days predicted after 23 hours of idling. Very good! This is with all wireless interfaces off, Always On Display off and NavBar off.
For reference - Note 4 with cdDroid 9 under similar conditions reports 45 days.
I checked this rom. the sd card is not mounted as internal memory, the phone falls into the bootloop before the lock screen, after which the bootloop again. wipe data or format does not help
-----------------
udp. the backlight of the hardware buttons does not work, although it is enabled in the settings
-----------------
upd. the indication of charge percentages in the status bar does not work when the display is selected with a circle inside the icon
alexfire_s said:
I checked this rom. the sd card is not mounted as internal memory, the phone falls into the bootloop before the lock screen, after which the bootloop again. wipe data or format does not help
Click to expand...
Click to collapse
Simply remove the sdcard.
alexfire_s said:
udp. the backlight of the hardware buttons does not work, although it is enabled in the settings
Click to expand...
Click to collapse
You're right, this will come later from lineageos.
alexfire_s said:
upd. the indication of charge percentages in the status bar does not work when the display is selected with a circle inside the icon
Click to expand...
Click to collapse
Ok, this will also be fixed from the linageos side.
html6405 said:
Simply remove the sdcard.
You're right, this will come later from lineageos.
Ok, this will also be fixed from the linageos side.
Click to expand...
Click to collapse
now I use the 7100 as the main device, I actively use it, I can quickly share bugs if I find them. is it possible to contact you directly without communicating on the formum? do you use a group of testers in telegram?

Categories

Resources