Related
Hello all _ I imagine this is around but I can't find a guide on how to do it so can someone please point me in the right direction as I would like to go back to stock recovery and flash stock ROM.
Thank You, LL13- :good: :good: :good:
1. http://4pda.ru/forum/index.php?showtopic=626472&view=findpost&p=39313048 unpack and run .bat file ...
2. Download stock huawei rom for you device . unpack oficial firmware (use Huawei update extractor ). Flash stock recovery
adb reboot bootloader // enter phone to bootloader mode
fastboot flash recovery you-recovery.img //flash recovery image
acbka said:
1. http://4pda.ru/forum/index.php?showtopic=626472&view=findpost&p=39313048 unpack and run .bat file ...
2. Download stock huawei rom for you device . unpack oficial firmware (use Huawei update extractor ). Flash stock recovery
adb reboot bootloader // enter phone to bootloader mode
fastboot flash recovery you-recovery.img //flash recovery image
Click to expand...
Click to collapse
Thank You acbka !!
This is what I was looking for.
Cheers, LL13-
Hey guys, so if I want to flash stock recovery, do I need to unlock bootloader? Which I did...
Then when I tried flashing the extracted recovery.img, the error message was
"target reported maximum downloaded size of 471859200 bytes
error: CAN'T LOAD RECOVERY.IMAGE: no error"
So would you guys tell me what happened?
Thanks!
---------- Post added at 03:30 PM ---------- Previous post was at 02:42 PM ----------
BTW, do I need to root the phone before I can flash the stock recovery? Could someone point me to the right direction? Thanks!
rollingrcok said:
Hey guys, so if I want to flash stock recovery, do I need to unlock bootloader? Which I did...
Then when I tried flashing the extracted recovery.img, the error message was
"target reported maximum downloaded size of 471859200 bytes
error: CAN'T LOAD RECOVERY.IMAGE: no error"
So would you guys tell me what happened?
Thanks!
---------- Post added at 03:30 PM ---------- Previous post was at 02:42 PM ----------
BTW, do I need to root the phone before I can flash the stock recovery? Could someone point me to the right direction? Thanks!
Click to expand...
Click to collapse
Did you ever find a solution? I'm having the same problem, I'm on TWRP trying to go back to stock(B321) and fastboot flash fails (remote size too large).
HI all, i own a Honor 6 L02 and i have the following brick problems.
1. in normal boot i get RESCUE MODE error! func no9 func_boot_kernel
2.when i try to boot in recovery i get RESCUE MODE error no 10 func_boot_recovery
3when i try 3 buttons i get the same as no2
4.when i try fastboot(my phone is unlocked) i cannot flash ANYTHING from pc because i get failed remote command not allowed.
which i think is the major problem
I think it all initiated when i was in 532 lollipop and flashed wrong recovery(recovery for L04) in order to flash superuser which i did and everything was okay indeed.Until i wanted to move back to 316 stable kitkat, but i couldnot flash stock recovery because of the fail command not alowed,so i Installed Flashify ,flashed TWRP and then tried to flash image through twrp.
After rebooting i got bricked.ANY solutions?
Nobody can suggest a solution ? smth to begin from?
pudup said:
Is your bootloader unlocked? If so then the fastboot commands should work. Does your phone show up when you type "fastboot devices"?
If all fastboot still doesn't work, try updating the drivers. Download the latest multi tool and use that. Just flash a stock rom with multi tool or flash all the individual img files with fastboot manually.
Click to expand...
Click to collapse
Thanks for the reply.My bootloader says phone unlocked ,so i supposse it is.My phone shows up when i type fastboot devices.
Im using the latest multitool (and also tried different versions) and have installed the drivers on a fresh formatted windows 8.1 laptop!
the disaster problem is that i cannot flash ANYTHING with fastboot flash commands.For example:
sending recovery okay
writing recovery Failed error remote command not allowed.im getting this error with every single image file(boot,cust , system,recovery stock or custom)
pudup said:
Can you try locking your bootloader? Lock your bootloader and then switch off. Then unlock it and try flashing a recovery.
Also try this command after placing, let's say the twrp.img file for kitkat, in the fastboot folder.
"fastboot boot twrp.img"
That boots directly into twrp without flashing it. See if that works.
Click to expand...
Click to collapse
This is what i get when i try to relock bootloader
* daemon not runnig.starting it now on port 5037
daemon started successfully
T2FDU1482900...... fastboot
...
Failed (remote:stat not match)
finished total time 0.003
If i try to unlock it (although it s written phone unlocked) i get
FAILED ( remoteassword wrong)
shouldnt i get smth like bootloader already unlocked?
The weird thing is im 100% sure that im using the correct bootloader password because i have gotten
it from 3 different sources(local huawei,chinese site huawei a year ago, and the tool a guy has posted here on xda)
Last i have copied twrp.img in the folder and tried the command
fastboot boot twrp.img
downloading 'boot.img'
OKAY [1.047s]
booting...
FAILED(remote:command not allowed)
Thank you for your help,i appreciate it
Using fastboot flash your rom recovery again and your rom recovery
---------- Post added at 07:59 PM ---------- Previous post was at 07:55 PM ----------
dimikon said:
This is what i get when i try to relock bootloader
* daemon not runnig.starting it now on port 5037
daemon started successfully
T2FDU1482900...... fastboot
...
Failed (remote:stat not match)
finished total time 0.003
If i try to unlock it (although it s written phone unlocked) i get
FAILED ( remoteassword wrong)
shouldnt i get smth like bootloader already unlocked?
The weird thing is im 100% sure that im using the correct bootloader password because i have gotten
it from 3 different sources(local huawei,chinese site huawei a year ago, and the tool a guy has posted here on xda)
Last i have copied twrp.img in the folder and tried the command
fastboot boot twrp.img
downloading 'boot.img'
OKAY [1.047s]
booting...
FAILED(remote:command not allowed)
Thank you for your help,i appreciate it
Click to expand...
Click to collapse
you flash TWRP RECOVERY in your BOOT partition it is Wrong
in fast boot do that
for Boot.img (your rom num)
fastboot flash boot boot.img
for recovery (your rom num)
fastboot flash recovery recovery.img
adhamamar said:
Using fastboot flash your rom recovery again and your rom recovery
---------- Post added at 07:59 PM ---------- Previous post was at 07:55 PM ----------
you flash TWRP RECOVERY in your BOOT partition it is Wrong
in fast boot do that
for Boot.img (your rom num)
fastboot flash boot boot.img
for recovery (your rom num)
fastboot flash recovery recovery.img
Click to expand...
Click to collapse
My friend,,, every image i try to flash via fastboot (recovery,boot,system,cust) gives me FAILED error:remote command not allowed
what i did with the twrp.img was the thing that the other guy advised to see if it would work
do you have a TWRP backup of your rom? if yes try restore it ....
if not
Search on this site for TWRP backup for your build num and Change the serial number for the backup copy with your phone serial number (folder name and change inside recovery.log file) (http://4pda.ru/forum/index.php?showtopic=671958&st=920)
adhamamar said:
do you have a TWRP backup of your rom? if yes try restore it ....
if not
Search on this site for TWRP backup for your build num and Change the serial number for the backup copy with your phone serial number (folder name and change inside recovery.log file) (http://4pda.ru/forum/index.php?showtopic=671958&st=920)
Click to expand...
Click to collapse
Thank you very much , but how will i be able to restore it ??? i cannot boot into recovery ,i get error no FUNC_BOOT_RECOVERY
read this http://forum.xda-developers.com/showpost.php?p=56662843&postcount=2945
adhamamar said:
read this http://forum.xda-developers.com/showpost.php?p=56662843&postcount=2945
Click to expand...
Click to collapse
No luck,what this tool does is similar to the multitool unbrick,just tries to flash the images in an automated way,and gives me the
FAILED error remote command not allowed
pudup said:
Sorry but it seems your phone is hard bricked. Take it to a service center.
The "command not allowed" error usually comes up for locked bootloaders or in some cases when usb debugging is not switched on. There is nothing i can think of right now for you to do.
I suggest you lie to the people at the service center and tell them this happened while you were doing a normal update that was given to you OTA.
Click to expand...
Click to collapse
what do you think would be the cost for repairing? i have asked at the local Huawei but they wont repair it because it is not bought from E.U. ,is there any chance that somebody would repair it without sending it back to china(after all guarantee is lost ,i own it for 1,5 years)
Good Day
No one seems able to cure my restarting X2 problem
I have mininal ADB and fastboot installed
I need to try and install B112 using adb
How do I use adb to flash B112 to my x2 ? (step by step please)
Please please there must be someone out there can help
Regards
Mark
[founder of xda Huawei MediaPad X2 forum]
elio321 said:
Good Day
No one seems able to cure my restarting X2 problem
I have mininal ADB and fastboot installed
I need to try and install B112 using adb
How do I use adb to flash B112 to my x2 ? (step by step please)
Please please there must be someone out there can help
Regards
Mark
[founder of xda Huawei MediaPad X2 forum]
Click to expand...
Click to collapse
Flash via ADB all the img files fromB112 without Stock Recovery
Flash the Universal Cust B112 in TWRP
Flash Stock Recovery from B112
Factory Reset with Internal Memory
pasta
letschky said:
Flash via ADB all the img files fromB112 without Stock Recovery
Flash the Universal Cust B112 in TWRP
Flash Stock Recovery from B112
Factory Reset with Internal Memory
pasta
Click to expand...
Click to collapse
how do i flash using adb ?
I can flash using fastboot
fastboot flash boot boot.img etc
what is the command syntax for flashing using the adb command ?
elio321 said:
how do i flash using adb ?
I can flash using fastboot
fastboot flash boot boot.img etc
what is the command syntax for flashing using the adb command ?
Click to expand...
Click to collapse
fastboot is good
and this is good(fastboot flash boot boot.img etc )
letschky said:
fastboot is good
and this is good(fastboot flash boot boot.img etc )
Click to expand...
Click to collapse
stilll not working for me I am still getting the constant restart with the grinding noise
elio321 said:
stilll not working for me I am still getting the constant restart with the grinding noise
Click to expand...
Click to collapse
Your Bootloader is unlocked?
letschky said:
Your Bootloader is unlocked?
Click to expand...
Click to collapse
yes i believe so...how can i verify it is ?
elio321 said:
yes i believe so...how can i verify it is ?
Click to expand...
Click to collapse
Boot into Bootloader and the Red font says unlocked or green Font says Locked
when i go into bootloader mode it says PHONE Unlocked so I am presuming the bootloader is unlocked
elio321 said:
when i go into bootloader mode it says PHONE Unlocked so I am presuming the bootloader is unlocked
Click to expand...
Click to collapse
is TWRP installed?
elio321 said:
when i go into bootloader mode it says PHONE Unlocked so I am presuming the bootloader is unlocked
Click to expand...
Click to collapse
got red font unlocked
letschky said:
is TWRP installed?
Click to expand...
Click to collapse
it was...but now I am back to stock recovery....and i cant get twrp (5.1.1) to install using fastboot now
if you flash the img files says fastboot ok or?
---------- Post added at 05:02 PM ---------- Previous post was at 04:59 PM ----------
elio321 said:
it was...but now I am back to stock recovery....and i cant get twrp (5.1.1) to install using fastboot now
Click to expand...
Click to collapse
yes you can Flash Twrp via fastboot.
fastboot flash recovery TWRP_eng.img
have you a Backup of the B112 from twrp?
letschky said:
if you flash the img files says fastboot ok or?
---------- Post added at 05:02 PM ---------- Previous post was at 04:59 PM ----------
yes you can Flash Twrp via fastboot.
fastboot flash recovery TWRP_eng.img
have you a Backup of the B112 from twrp?
Click to expand...
Click to collapse
yes flashing the image files fastboot says ok
I have a number of B112 TWRP created backups
you can try to restore the backup and flash the Universal Cust B112,this helps me
---------- Post added at 05:26 PM ---------- Previous post was at 05:20 PM ----------
ok,step by step
Boot into Bootloader and flash all the img,Boot,Cache,Cust,System,Userdata.img via fastboot
Flash Twrp and Boot into TWRP
Restore your B112 Backup
Flash the Universal Cust for B112
Boot from TWRP into Bootloader and flash the Stock Recovery via fastboot.
Reboot and make a Factory Reset
This Procedur helps me go back from B205 or B209 to B112
---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------
Here is the Universal Cust for B112
http://forum.xda-developers.com/mediapad-x2/development/mod-sim-card-switching-fix-t3254534
and here a Tool to flash TWRP 6.0 ENG
https://www.androidfilehost.com/?fid=24499762636008564
letschky said:
you can try to restore the backup and flash the Universal Cust B112,this helps me
---------- Post added at 05:26 PM ---------- Previous post was at 05:20 PM ----------
ok,step by step
Boot into Bootloader and flash all the img,Boot,Cache,Cust,System,Userdata.img via fastboot
Flash Twrp and Boot into TWRP
Restore your B112 Backup
Flash the Universal Cust for B112
Boot from TWRP into Bootloader and flash the Stock Recovery via fastboot.
Reboot and make a Factory Reset
This Procedur helps me go back from B205 or B209 to B112
---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------
Here is the Universal Cust for B112
http://forum.xda-developers.com/mediapad-x2/development/mod-sim-card-switching-fix-t3254534
and here a Tool to flash TWRP 6.0 ENG
https://www.androidfilehost.com/?fid=24499762636008564
Click to expand...
Click to collapse
i don't have userdata.img
when u say reboot and make a factory reset...you mean from within Android/settings ? If not, from where do I factory reset
does it matter what version of twrp i use ?
you have provided a link to twrp 6......does this indicate it is for use with Android 6 or is it just the version number of the program ?
elio321 said:
i don't have userdata.img
when u say reboot and make a factory reset...you mean from within Android/settings ? If not, from where do I factory reset
does it matter what version of twrp i use ?
you have provided a link to twrp 6......does this indicate it is for use with Android 6 or is it just the version number of the program ?
Click to expand...
Click to collapse
Userdata.img is in the B112 UPDATE.APP extract this file and flash
fastboot flash userdata USERDATA.img
TWRP 6 work on Android 5 and 6,i am on B112 and use TWRP 6 and works
Yes you can make the Factory Reset from Settings or Power off and Press and hold Volume+ and Power Button at same Time for ca 10 sec. and boot in Stock Recovery.
In stock Recovery you can use Factory Reset and Wipe Cache
not boot ing past honor animation after doing those steps but cant factory reset from stock recovery and when i try and put twrp back it says failed write error
Which Version of X2 do you have,703L?
letschky said:
Which Version of X2 do you have,703L?
Click to expand...
Click to collapse
Yes GEM-703L
I have tried to install twrp. Its worked. But after few days my phone restart and bootloop at the logo. I tried to go recovery. But i cant. I tried flash by using fastboot, mi tools, edl method, its says successful. But mobile again stuck at logo..any solution?
hello, what twrp have you flash ? and did you have a custom rom when it bootloop ?
tofclaire said:
hello, what twrp have you flash ? and did you have a custom rom when it bootloop ?
Click to expand...
Click to collapse
Twrp by root. I had Miui 10
have you tried to flash miui rom beta with miflash if you are always unlocked ? (tick clean all, not clean all and lock) and i asked what twrp you used ? there is several twrp on the forum for redmi not 6...
---------- Post added at 05:47 PM ---------- Previous post was at 05:25 PM ----------
you mean this one : https://forum.xda-developers.com/re...pment/unoficialtwrp-redmi-note-6-pro-t3863679 ?
i advice you to re flash twrp and try to re install a custom rom
tofclaire said:
have you tried to flash miui rom beta with miflash if you are always unlocked ? (tick clean all, not clean all and lock) and i asked what twrp you used ? there is several twrp on the forum for redmi not 6...
---------- Post added at 05:47 PM ---------- Previous post was at 05:25 PM ----------
you mean this one : https://forum.xda-developers.com/re...pment/unoficialtwrp-redmi-note-6-pro-t3863679 ?
i advice you to re flash twrp and try to re install a custom rom
Click to expand...
Click to collapse
Thanks for reply.
I have tried everything ( both stable & Beta). I flash several twrp. But after flash 1st time stuck on twrp logo(nothing else). When i tried to enter recovery again that time stuck on mi logo.
you can try : copy the recovery.img (or name of your twrp.img) in your sdcard, flash twrp with fastboot command, boot in twrp with fastboot command, choose install image and flash again recovery.img, in twrp choose reboot recovery, format data-system-cache-dalvik, and flash a custom rom...
---------- Post added at 07:38 PM ---------- Previous post was at 06:46 PM ----------
if nothing works, try to flash with mi flash, try to boot in miui recovery, and flash a new rom with mi assistant. i have unbrickef a redmi note 5 with this method (you need mi assistant on pc )
tofclaire said:
you can try : copy the recovery.img (or name of your twrp.img) in your sdcard, flash twrp with fastboot command, boot in twrp with fastboot command, choose install image and flash again recovery.img, in twrp choose reboot recovery, format data-system-cache-dalvik, and flash a custom rom...
---------- Post added at 07:38 PM ---------- Previous post was at 06:46 PM ----------
if nothing works, try to flash with mi flash, try to boot in miui recovery, and flash a new rom with mi assistant. i have unbrickef a redmi note 5 with this method (you need mi assistant on pc )
Click to expand...
Click to collapse
I've tried with mi flash. Its shows successfully flash. But i cant boot in miui recovery.
have you tried to boot in twrp by fastboot command from a computer ?( not with power and vol+)
for flash you use : fastboot flash recovery xxxx.img
for boot : fastboot boot xxxx.img
lazy_unicorn said:
I have tried to install twrp. Its worked. But after few days my phone restart and bootloop at the logo. I tried to go recovery. But i cant. I tried flash by using fastboot, mi tools, edl method, its says successful. But mobile again stuck at logo..any solution?
Click to expand...
Click to collapse
wipe every partition and flash pitch black custom recovery make another fresh format especially data partition and then flash any rom based on aosp if it works thats great else flash miui rom.
tofclaire said:
have you tried to boot in twrp by fastboot command from a computer ?( not with power and vol+)
for flash you use : fastboot flash recovery xxxx.img
for boot : fastboot boot xxxx.img
Click to expand...
Click to collapse
Hi, dude. Are you in Pie version? I cannot flash any Oreo version, im getting bootloop, but flashing Pie Beta solved this, but i have little problem, after restore a qcn file found on the web, cause i had "no signal" problem, the phone have nv data corrupt. Now cannot boot in Pie, it sends me right to recovery, and cant Miflash Oreo version cause the bootloop. Could you or anyone make a EFS backup for fix nv data message in recovery, please ?
This boot comes with twrp and Magisk
Fastboot command ：
fastboot flash boot_a cheryl-P-Magisk-twrp-boot.img
fastboot flash boot_b cheryl-P-Magisk-twrp-boot.img
fastboot reboot
download
https://drive.google.com/file/d/1VbmtVm3OGLxXYZ92YOOxsQkoyuOvi91_/view?usp=sharing
Thanks @将军和妓 Making a boot file
Twrp is working for me but not Magisk, I had to flash it via recovery. Thank you very much for sharing
MusTangKKK said:
This boot comes with twrp and Magisk
Fastboot command ：
fastboot flash boot_a cheryl-P-Magisk-twrp-boot.img
fastboot flash boot_b cheryl-P-Magisk-twrp-boot.img
fastboot reboot
download
https://drive.google.com/file/d/1VbmtVm3OGLxXYZ92YOOxsQkoyuOvi91_/view?usp=sharing
Thanks @将军和妓 Making a boot file
Click to expand...
Click to collapse
I tried with fastboot boot cheryl-P-Magisk-twrp-boot.img and nothing happened.
I'll try properly flashing the image when I have the time to make a backup.
Anyone has been able to backup the clean Pie boot.img ?
EDIT: Tried flashing the boot image and it bootloops. Maybe device encription has to be disabled for twrp to work?
thank you so much for this
I worked after I flashed my phone to 7.1.1 and updated to 9 but when I did it again and after updated did a wipe(just going into the setting and wiping) I couldn't flash part b of the boot just got an error
:tools root# ./fastboot flash boot_a cheryl-P-Magisk-twrp-boot.img
Sending 'boot_a' (26840 KB) OKAY [ 0.840s]
Writing 'boot_a' OKAY [ 3.657s]
Finished. Total time: 4.503s
:tools root# ./fastboot flash boot_B cheryl-P-Magisk-twrp-boot.img
Sending 'boot_B' (26840 KB) OKAY [ 0.659s]
Writing 'boot_B' FAILED (remote: 'No such partition.')
fastboot: error: Command failed
(EDIT: I'm retarded didn't notice the uppercase B but it seem they really didn't care of Gen1)
If you can't get into the system, you can go in twrp to restore factory settings and then restart, you can enter the system
MusTangKKK said:
If you can't get into the system, you can go in twrp to restore factory settings and then restart, you can enter the system
Click to expand...
Click to collapse
No everything is working just notice it said Razer 2
Djcall11 said:
No everything is working just notice it said Razer 2
Click to expand...
Click to collapse
This boot only supports Razer phone 1
[/LIST]
[/LIST]
MusTangKKK said:
If you can't get into the system, you can go in twrp to restore factory settings and then restart, you can enter the system
Click to expand...
Click to collapse
MusTangKKK said:
This boot only supports Razer phone 1
Click to expand...
Click to collapse
My guy only Razer 1 has 7.1.1 I just seen this after I reset after updating to pie everything I fine thank or care doe
I made the mistake of trying to get into recovery after this update using the Volume + plug in USB-C. (Update removed root/Magisk of course). It then wiped my entire device!!! No warning. No recovery screen. Just a message saying wiping device.
I immediately wiped it to put Lineage on it.
waiflih said:
I tried with fastboot boot cheryl-P-Magisk-twrp-boot.img and nothing happened.
I'll try properly flashing the image when I have the time to make a backup.
Anyone has been able to backup the clean Pie boot.img ?
EDIT: Tried flashing the boot image and it bootloops. Maybe device encription has to be disabled for twrp to work?
Click to expand...
Click to collapse
You need to make a copy of the flash all batch file and edit it and take out the line that reads "erase userdata" save the file. What this will do is make the factory image skip factory reset if you want to keep your files but wanna restore to fix or whatever.
---------- Post added at 10:03 AM ---------- Previous post was at 09:59 AM ----------
MusTangKKK said:
This boot comes with twrp and Magisk
Fastboot command ：
fastboot flash boot_a cheryl-P-Magisk-twrp-boot.img
fastboot flash boot_b cheryl-P-Magisk-twrp-boot.img
fastboot reboot
download
https://drive.google.com/file/d/1VbmtVm3OGLxXYZ92YOOxsQkoyuOvi91_/view?usp=sharing
Thanks @将军和妓 Making a boot file
Click to expand...
Click to collapse
So i flashed this and i also even tried flashing twrp and magisk like normal but after i would boot, most apps would not load. Im currently reverted to 8 to figure this out. If you could help me figure out what is wrong, would be appreciated.
Guys am running android 9 on razer phone 1 and bootloader unlocked. However keep getting error write to device failed. Any advise please?
marvi0 said:
Guys am running android 9 on razer phone 1 and bootloader unlocked. However keep getting error write to device failed. Any advise please?
Click to expand...
Click to collapse
Any suggestions?
marvi0 said:
Guys am running android 9 on razer phone 1 and bootloader unlocked. However keep getting error write to device failed. Any advise please?
Click to expand...
Click to collapse
Do you have both parts of the bootloader unlocked?
iliais347 said:
Do you have both parts of the bootloader unlocked?
Click to expand...
Click to collapse
hello buddy. Aaa you might be onto something. I am afraid I don't have my phone with me now. How do I check though if I have both parts of the bootloader unlocked?
marvi0 said:
hello buddy. Aaa you might be onto something. I am afraid I don't have my phone with me now. How do I check though if I have both parts of the bootloader unlocked?
Click to expand...
Click to collapse
Try fastboot oem device-info
---------- Post added at 03:55 AM ---------- Previous post was at 03:29 AM ----------
marvi0 said:
hello buddy. Aaa you might be onto something. I am afraid I don't have my phone with me now. How do I check though if I have both parts of the bootloader unlocked?
Click to expand...
Click to collapse
But fyi, the razer phone has two parts to the bootloader. One is unlocked with
"Fastboot flashing unlock"
And the other is
"Fastboot flashing unlock_critical" i believe
iliais347 said:
Try fastboot oem device-info
---------- Post added at 03:55 AM ---------- Previous post was at 03:29 AM ----------
But fyi, the razer phone has two parts to the bootloader. One is unlocked with
"Fastboot flashing unlock"
And the other is
"Fastboot flashing unlock_critical" i believe
Click to expand...
Click to collapse
Oh so I need to unlock both? Thanks will check this tonight
After install can't open music file on extened memory, usb otg
iliais347 said:
Try fastboot oem device-info
---------- Post added at 03:55 AM ---------- Previous post was at 03:29 AM ----------
But fyi, the razer phone has two parts to the bootloader. One is unlocked with
"Fastboot flashing unlock"
And the other is
"Fastboot flashing unlock_critical" i believe
Click to expand...
Click to collapse
Please can someone else confirm this please before I go ahead as I don't want to risk it?
marvi0 said:
Please can someone else confirm this please before I go ahead as I don't want to risk it?
Click to expand...
Click to collapse
Yes you need to unlock both and each command will also do a factory reset so backup anything you may need on the internal storage.
This is working great for me. Thanks
Sent from my Phone using Tapatalk