Related
My device's rom is MT7-L09V100R001C00B133SP11, I tried to install B127 MT7-L09 West Europe rom but have error while installing the rom. The error is "huawei cust fail". I tried many roms (B120, B121, B126, B127) but no success and everytime the same error. But I can flash only its original rom MT7-L09V100R001C00B133SP11 without any problem. How to solve this problem? Help please.
Tried to flash after FLASHE of Rom, the Cust.img in flash mode?
fastboot flash cust cust.img
The Cust you can find here.
https://mega.co.nz/#!uQ4mFTjB!vcz0m0Ea4mUjkIQdQEgCtdnn3RkpxKK1sFDHbPSvWSA
Fooox1 said:
Tried to flash after FLASHE of Rom, the Cust.img in flash mode?
fastboot flash cust cust.img
The Cust you can find here.
https://mega.co.nz/#!uQ4mFTjB!vcz0m0Ea4mUjkIQdQEgCtdnn3RkpxKK1sFDHbPSvWSA
Click to expand...
Click to collapse
No problem flashing cust. When I put the rom dload and to install full rom it gives error. I could not flash any rom from dload except b133.
Then extract the desired Rome and boot.img, recovery.img, system.img and cust.img manual flash.
command:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
Then it should start and you can do that Rome again completely FLASHE.
Fooox1 said:
Then extract the desired Rome and boot.img, recovery.img, system.img and cust.img manual flash.
command:
fastboot flash boot boot.img
fastboot flash recovery recovery.img
fastboot flash system system.img
fastboot flash cust cust.img
Then it should start and you can do that Rome again completely FLASHE.
Click to expand...
Click to collapse
I did everything you write. Everytime no success. I think there was a regional lock on our phones. I think I must flash more img files to unlock regional lock.
Of course, the boot loader mechanism to be open. More imgs can not flash itself. All other get error messages.
Open bootloader, flash Custom Rom would be an alternative.
Fooox1 said:
Of course, the boot loader mechanism to be open. More imgs can not flash itself. All other get error messages.
Open bootloader, flash Custom Rom would be an alternative.
Click to expand...
Click to collapse
My bootloader is unlocked. Which custom rom can I flash.
Try it so that is close to stock and deodexd.
http://forum.xda-developers.com/mate-7/orig-development/custom-rom-kangvip-rom-b122sp06v1-1-t3022436
Fooox1 said:
Try it so that is close to stock and deodexd.
http://forum.xda-developers.com/mate-7/orig-development/custom-rom-kangvip-rom-b122sp06v1-1-t3022436
Click to expand...
Click to collapse
But it says "In addition, you should the B127 MT7-L09 Western Europe or the B122SP06 installed, otherwise it will get to the bootloop." and my rom is not b127 or b126. My rom is b133. Will it bootloop.
b127 is the minimum requirement, you lie already higher. If so beware.
Fooox1 said:
b127 is the minimum requirement, you lie already higher. If so beware.
Click to expand...
Click to collapse
Can you explain step by step what will I do.
I'm in cust fail error drama like you, i have TL 10 international stuck in b119 original firmware but i got root with alternative method whitout unlock boot loader.
Cust fail appears even if i simply Hard reset my phone the root remains
No ROM upgrade via ota non ROM can be flashed via SD card method.
My questions:
Can i try to flash original firmware via fast boot without unlock boot loader first?
I unpacked update.app with extractor and got many file : cust boot recovery modem etc
Which One should i flash and in which order?
Thnks in advance forma help
Without unlocked bootloader you can not flash imgs. If you have unpack the zip you a dload folder that is on the SD and you can flash.
---------- Post added at 01:21 PM ---------- Previous post was at 01:17 PM ----------
isaekrem said:
Can you explain step by step what will I do.
Click to expand...
Click to collapse
You can read it in the manual.
- Flash KangVIP recovery
- Zip to the SD
- Factory reset in recovery
- Flash zip
Done.
Fooox1 said:
Without unlocked bootloader you can not flash imgs. If you have unpack the zip you a dload folder that is on the SD and you can flash.
---------- Post added at 01:21 PM ---------- Previous post was at 01:17 PM ----------
You can read it in the manual.
- Flash KangVIP recovery
- Zip to the SD
- Factory reset in recovery
- Flash zip
Done.
Click to expand...
Click to collapse
Thanks. Now I am on kangvip rom.
can someone upload they cust folder for me?
Good Day
No one seems able to cure my restarting X2 problem
I have mininal ADB and fastboot installed
I need to try and install B112 using adb
How do I use adb to flash B112 to my x2 ? (step by step please)
Please please there must be someone out there can help
Regards
Mark
[founder of xda Huawei MediaPad X2 forum]
elio321 said:
Good Day
No one seems able to cure my restarting X2 problem
I have mininal ADB and fastboot installed
I need to try and install B112 using adb
How do I use adb to flash B112 to my x2 ? (step by step please)
Please please there must be someone out there can help
Regards
Mark
[founder of xda Huawei MediaPad X2 forum]
Click to expand...
Click to collapse
Flash via ADB all the img files fromB112 without Stock Recovery
Flash the Universal Cust B112 in TWRP
Flash Stock Recovery from B112
Factory Reset with Internal Memory
pasta
letschky said:
Flash via ADB all the img files fromB112 without Stock Recovery
Flash the Universal Cust B112 in TWRP
Flash Stock Recovery from B112
Factory Reset with Internal Memory
pasta
Click to expand...
Click to collapse
how do i flash using adb ?
I can flash using fastboot
fastboot flash boot boot.img etc
what is the command syntax for flashing using the adb command ?
elio321 said:
how do i flash using adb ?
I can flash using fastboot
fastboot flash boot boot.img etc
what is the command syntax for flashing using the adb command ?
Click to expand...
Click to collapse
fastboot is good
and this is good(fastboot flash boot boot.img etc )
letschky said:
fastboot is good
and this is good(fastboot flash boot boot.img etc )
Click to expand...
Click to collapse
stilll not working for me I am still getting the constant restart with the grinding noise
elio321 said:
stilll not working for me I am still getting the constant restart with the grinding noise
Click to expand...
Click to collapse
Your Bootloader is unlocked?
letschky said:
Your Bootloader is unlocked?
Click to expand...
Click to collapse
yes i believe so...how can i verify it is ?
elio321 said:
yes i believe so...how can i verify it is ?
Click to expand...
Click to collapse
Boot into Bootloader and the Red font says unlocked or green Font says Locked
when i go into bootloader mode it says PHONE Unlocked so I am presuming the bootloader is unlocked
elio321 said:
when i go into bootloader mode it says PHONE Unlocked so I am presuming the bootloader is unlocked
Click to expand...
Click to collapse
is TWRP installed?
elio321 said:
when i go into bootloader mode it says PHONE Unlocked so I am presuming the bootloader is unlocked
Click to expand...
Click to collapse
got red font unlocked
letschky said:
is TWRP installed?
Click to expand...
Click to collapse
it was...but now I am back to stock recovery....and i cant get twrp (5.1.1) to install using fastboot now
if you flash the img files says fastboot ok or?
---------- Post added at 05:02 PM ---------- Previous post was at 04:59 PM ----------
elio321 said:
it was...but now I am back to stock recovery....and i cant get twrp (5.1.1) to install using fastboot now
Click to expand...
Click to collapse
yes you can Flash Twrp via fastboot.
fastboot flash recovery TWRP_eng.img
have you a Backup of the B112 from twrp?
letschky said:
if you flash the img files says fastboot ok or?
---------- Post added at 05:02 PM ---------- Previous post was at 04:59 PM ----------
yes you can Flash Twrp via fastboot.
fastboot flash recovery TWRP_eng.img
have you a Backup of the B112 from twrp?
Click to expand...
Click to collapse
yes flashing the image files fastboot says ok
I have a number of B112 TWRP created backups
you can try to restore the backup and flash the Universal Cust B112,this helps me
---------- Post added at 05:26 PM ---------- Previous post was at 05:20 PM ----------
ok,step by step
Boot into Bootloader and flash all the img,Boot,Cache,Cust,System,Userdata.img via fastboot
Flash Twrp and Boot into TWRP
Restore your B112 Backup
Flash the Universal Cust for B112
Boot from TWRP into Bootloader and flash the Stock Recovery via fastboot.
Reboot and make a Factory Reset
This Procedur helps me go back from B205 or B209 to B112
---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------
Here is the Universal Cust for B112
http://forum.xda-developers.com/mediapad-x2/development/mod-sim-card-switching-fix-t3254534
and here a Tool to flash TWRP 6.0 ENG
https://www.androidfilehost.com/?fid=24499762636008564
letschky said:
you can try to restore the backup and flash the Universal Cust B112,this helps me
---------- Post added at 05:26 PM ---------- Previous post was at 05:20 PM ----------
ok,step by step
Boot into Bootloader and flash all the img,Boot,Cache,Cust,System,Userdata.img via fastboot
Flash Twrp and Boot into TWRP
Restore your B112 Backup
Flash the Universal Cust for B112
Boot from TWRP into Bootloader and flash the Stock Recovery via fastboot.
Reboot and make a Factory Reset
This Procedur helps me go back from B205 or B209 to B112
---------- Post added at 05:29 PM ---------- Previous post was at 05:26 PM ----------
Here is the Universal Cust for B112
http://forum.xda-developers.com/mediapad-x2/development/mod-sim-card-switching-fix-t3254534
and here a Tool to flash TWRP 6.0 ENG
https://www.androidfilehost.com/?fid=24499762636008564
Click to expand...
Click to collapse
i don't have userdata.img
when u say reboot and make a factory reset...you mean from within Android/settings ? If not, from where do I factory reset
does it matter what version of twrp i use ?
you have provided a link to twrp 6......does this indicate it is for use with Android 6 or is it just the version number of the program ?
elio321 said:
i don't have userdata.img
when u say reboot and make a factory reset...you mean from within Android/settings ? If not, from where do I factory reset
does it matter what version of twrp i use ?
you have provided a link to twrp 6......does this indicate it is for use with Android 6 or is it just the version number of the program ?
Click to expand...
Click to collapse
Userdata.img is in the B112 UPDATE.APP extract this file and flash
fastboot flash userdata USERDATA.img
TWRP 6 work on Android 5 and 6,i am on B112 and use TWRP 6 and works
Yes you can make the Factory Reset from Settings or Power off and Press and hold Volume+ and Power Button at same Time for ca 10 sec. and boot in Stock Recovery.
In stock Recovery you can use Factory Reset and Wipe Cache
not boot ing past honor animation after doing those steps but cant factory reset from stock recovery and when i try and put twrp back it says failed write error
Which Version of X2 do you have,703L?
letschky said:
Which Version of X2 do you have,703L?
Click to expand...
Click to collapse
Yes GEM-703L
Hello Master ...
On my hand the bootloop input device is P8 Max root. Device International version (dav-701l Cust 199) does not have the update file as you know ... device writes "red" phone unlocked "frp unlocked" on fastboot screen ... but when I install TWRP with fastboot yada "system.img & boot .img "error (failed command not allowed)
Can it be saved? Or is it impossible without the update file belonging to that region?
Thanks in advance.
So whats your problem? You cant flash .img files via fastboot?
Hirs_E_Fruit said:
So whats your problem? You cant flash .img files via fastboot?
Click to expand...
Click to collapse
yes fastboot flashing img files... failed error?
installed the newest adb/fastboot files? i think i had this too someday and it was solved with this.
---------- Post added at 02:08 PM ---------- Previous post was at 01:42 PM ----------
https://drive.google.com/open?id=0B7q0s3loYhP3SU5aRWt6UzFJQkE
*******Solved thanks to Anteo*****I was rooted on Oreo MHA-L29C432 329(log) and I tried to unroot resulting on a bricked phone. Now I have only two bootload options(see screenshots) and erecovery. I cannot flash anything on bootload, I get errors on flashing twrp, boot image etc. Dload method also unsuccessful. Even with: "fastboot flash recovery_ramdisk twrp_android_o_mate9_a1.img" it says that flash is successful but twrp is not accessible or installed. Any help please.
Download and extract update.zip from your oreo firmware, from http://pro-teammt.ru/firmware-database/
Download Huawei Update Extractor.
Open Huawei Update Extractor. Click on the '..' button, open update.app that you extracted earlier.
Right click on RAMDISK, click in Extract Selected.
Flash ramdisk using fastboot flash ramdisk RAMDISK.img
You could extract KERNEL too and flash using fastboot flash kernel KERNEL.img
ante0 said:
Download and extract update.zip from your oreo firmware, from http://pro-teammt.ru/firmware-database/
Download Huawei Update Extractor.
Open Huawei Update Extractor. Click on the '..' button, open update.app that you extracted earlier.
Right click on RAMDISK, click in Extract Selected.
Flash ramdisk using fastboot flash ramdisk RAMDISK.img
You could extract KERNEL too and flash using fastboot flash kernel KERNEL.img
Click to expand...
Click to collapse
Thanks for the reply. Unfortunately when I load Update.app on the update extractor I get this error(see photo)
Edit: I unchecked some features on the settings of the extractor and now is extracting
jogefo said:
Thanks for the reply. Unfortunately when I load Update.app on the update extractor I get this error(see photo)
Click to expand...
Click to collapse
as expected... :/
I will download and extract it. Hold on.
Edit: To clarify, Huawei did something to erecovery_ramdisk (erecovery_ramdis) so the matching HEADER for it doesn't match,m so you have to extract using the splitupdate perl script (https://github.com/marcominetti/split_updata.pl though I'm using a pull request because it can filter what to extract https://github.com/smoser/split_updata.pl )
Here you go: https://mega.nz/#!1axXxSBD!bTpdnvUVoebD44up_dhOchHOGnVhPME4_eBNygV2mbI
Dear Anteo
It really worked your solution. You are a genius.
Thank you so much,
George
ante0 said:
as expected... :/
I will download and extract it. Hold on.
Edit: To clarify, Huawei did something to erecovery_ramdisk (erecovery_ramdis) so the matching HEADER for it doesn't match,m so you have to extract using the splitupdate perl script (https://github.com/marcominetti/split_updata.pl though I'm using a pull request because it can filter what to extract https://github.com/smoser/split_updata.pl )
Here you go: https://mega.nz/#!1axXxSBD!bTpdnvUVoebD44up_dhOchHOGnVhPME4_eBNygV2mbI
Click to expand...
Click to collapse
jogefo said:
Dear Anteo
It really worked your solution. You are a genius.
Thank you so much,
George
Click to expand...
Click to collapse
Thank you
please help sir.
ante0 said:
as expected... :/
I will download and extract it. Hold on.
Edit: To clarify, Huawei did something to erecovery_ramdisk (erecovery_ramdis) so the matching HEADER for it doesn't match,m so you have to extract using the splitupdate perl script (https://github.com/marcominetti/split_updata.pl though I'm using a pull request because it can filter what to extract https://github.com/smoser/split_updata.pl )
Here you go: https://mega.nz/#!1axXxSBD!bTpdnvUVoebD44up_dhOchHOGnVhPME4_eBNygV2mbI
Click to expand...
Click to collapse
i tried to root my mate 9 l29 c636 with 8.0.0.361 rom but it got in bootloops.
now error mode is showing only.
i find one thread with similar issues, which you helped.
please help, as i am unable to extract any image using update extractor.
my phone is showing error:- please update system again.
funct no 11 ( recovery image)
error no 2 (load failed)
please help sir
smsmasti said:
i tried to root my mate 9 l29 c636 with 8.0.0.361 rom but it got in bootloops.
now error mode is showing only.
i find one thread with similar issues, which you helped.
please help, as i am unable to extract any image using update extractor.
my phone is showing error:- please update system again.
funct no 11 ( recovery image)
error no 2 (load failed)
please help sir
Click to expand...
Click to collapse
Download and extract: https://mega.nz/#!ELYREZyZ!E1p-CZsjvMJQ5f1kphJIwKFvtFlOS3Z8Q5Cbs4Wy_Nw
Boot to fastboot & rescure, flash:
fastboot flash ramdisk RAMDISK.img
fastboot flash kernel KERNEL.img
fastboot flash recovery_ramdisk RECOVERY_RAMDISK.img
now you should be able to use update guide again.
Edit: Currently you can only flash SuperSU2.82:
For encrypted phone: https://mega.nz/#!dPISSKab!RKomqYjYh9lB1WCkAZY97f2CJvrdLdsSA5U9fk4GeMY
For decrypted phone: https://mega.nz/#!MDoBVabL!_X47_o9jnUOMLMfIDx45jsOdGRhLffHUdyUElb6enho
ante0 said:
Download and extract: https://mega.nz/#!ELYREZyZ!E1p-CZsjvMJQ5f1kphJIwKFvtFlOS3Z8Q5Cbs4Wy_Nw
Boot to fastboot & rescure, flash:
fastboot flash ramdisk RAMDISK.img
fastboot flash kernel KERNEL.img
fastboot flash recovery_ramdisk RECOVERY_RAMDISK.img
now you should be able to use update guide again.
Edit: Currently you can only flash SuperSU2.82:
For encrypted phone: https://mega.nz/#!dPISSKab!RKomqYjYh9lB1WCkAZY97f2CJvrdLdsSA5U9fk4GeMY
For decrypted phone: https://mega.nz/#!MDoBVabL!_X47_o9jnUOMLMfIDx45jsOdGRhLffHUdyUElb6enho
Click to expand...
Click to collapse
done ,as you said...
still same screen...
only chnage is that now i can see a android bootlogo screen...then goes to same error mode
smsmasti said:
done ,as you said...
still same screen...
only chnage is that now i can see a android bootlogo screen...then goes to same error mode
Click to expand...
Click to collapse
Same error?
ante0 said:
Same error?
Click to expand...
Click to collapse
yes
smsmasti said:
yes
Click to expand...
Click to collapse
here is the image...
when i am trying to extract image files using update extractor, its is saying..recvover_ramdis.img: invalid header crc- expected 17423 got 53274
smsmasti said:
yes
Click to expand...
Click to collapse
And fastboot didn't say Remote error or anything like that?
Try boot to recovery.
Ah, saw image now.
---------- Post added at 04:01 PM ---------- Previous post was at 03:53 PM ----------
smsmasti said:
when i am trying to extract image files using update extractor, its is saying..recvover_ramdis.img: invalid header crc- expected 17423 got 53274
Click to expand...
Click to collapse
That's because Huawei did something. It's erecovery.
Disable CRC in settings of Huawei update extractor
ante0 said:
And fastboot didn't say Remote error or anything like that?
Try boot to recovery.
Ah, saw image now.
---------- Post added at 04:01 PM ---------- Previous post was at 03:53 PM ----------
That's because Huawei did something. It's erecovery.
Disable CRC in settings of Huawei update extractor
Click to expand...
Click to collapse
can i flash system.img after extracting. will it help
smsmasti said:
can i flash system.img after extracting. will it help
Click to expand...
Click to collapse
Nope. Just RECOVERY_RAMDISK.img, RAMDISK.img and KERNEL.img.
eRecovey can't be flashed from fastboot
ante0 said:
Nope. Just RECOVERY_RAMDISK.img, RAMDISK.img and KERNEL.img.
eRecovey can't be flashed from fastboot
Click to expand...
Click to collapse
what can i do now
smsmasti said:
what can i do now
Click to expand...
Click to collapse
Could try flashing the other RECOVERY_VENDOR and RECOVERY_VBMETA. But it should work unless fastboot says something else.
Fastboot mode says FRP UNLOCK, right?
ante0 said:
Could try flashing the other RECOVERY_VENDOR and RECOVERY_VBMETA. But it should work unless fastboot says something else.
Fastboot mode says FRP UNLOCK, right?
Click to expand...
Click to collapse
yes frp and bootloader both unlock
smsmasti said:
yes frp and bootloader both unlock
Click to expand...
Click to collapse
Can you take a screenshot of command prompt after you've flashed the images?
-flash stock firmware with newflasher
-boot once. Install magisk manager app and patch stock boot image. (You can find it in Martinx3 stock recovery) than copy patched boot image to your computer.
-in fastboot:
* fastboot erase system
*fastboot flash userdata userdata.img
*fastboot flash system yoursystemfile.img
Optionally if you want to flash gapps
*fastboot flash boot twrp.img
*fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
Flash gapps in twrp and than select install image and choose patched_boot.img and select boot partition
if not just do
*fastboot flash boot patched_boot.img
*fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
*reboot
(To install magisk you need to boot once and then do fastboot flash boot patched_boot.img again)
Twrp you can find here https://forum.xda-developers.com/xp...recovery-twrp-3-2-2-0-touch-recovery-t3821597
Userdata.img-https://drive.google.com/file/d/1Ni_lU5jY3oQ4GDbezJ83BOLKNbLvU4ue/view
How copy patched boot image on computer? Thanks!
Connect your phone to pc and just copy it like a normall file. You can find it in download folder.
alexsmel1 said:
How copy patched boot image on computer? Thanks!
Click to expand...
Click to collapse
lolnwl said:
Connect your phone to pc and just copy it like a normall file. You can find it in download folder.
Click to expand...
Click to collapse
PS C:\ADB> fastboot flash patched_boot.img
unknown partition 'patched_boot.img'
error: cannot determine image filename for 'patched_boot.img'
---------- Post added at 04:00 PM ---------- Previous post was at 03:59 PM ----------
alexsmel1 said:
How copy patched boot image on computer? Thanks!
Click to expand...
Click to collapse
lolnwl said:
Connect your phone to pc and just copy it like a normall file. You can find it in download folder.
Click to expand...
Click to collapse
PS C:\ADB> fastboot flash patched_boot.img
unknown partition 'patched_boot.img'
error: cannot determine image filename for 'patched_boot.img'
How do i fix this? Thank!
alexsmel1 said:
PS C:\ADB> fastboot flash patched_boot.img
unknown partition 'patched_boot.img'
error: cannot determine image filename for 'patched_boot.img'
---------- Post added at 04:00 PM ---------- Previous post was at 03:59 PM ----------
PS C:\ADB> fastboot flash patched_boot.img
unknown partition 'patched_boot.img'
error: cannot determine image filename for 'patched_boot.img'
How do i fix this? Thank!
Click to expand...
Click to collapse
It should be fastboot flash boot patched_boot.img.
lolnwl said:
Connect your phone to pc and just copy it like a normall file. You can find it in download folder.
Click to expand...
Click to collapse
Before the fastboot flash patched_boot.img command, I requested twrp of my stock firmware.
fastboot flash boot twrp-xz2.img
* fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
After that, it booted into recovery and installed the patched_boot.img and select boot partition.
After that, it was loaded into the system after the logo was loaded, it disappears and the black screen remains on, after that the reboot is permanent.
Help please solve the problem.
I took the boot.img file from the latest aosp firmware from MartinX3. Maybe I did something wrong?
alexsmel1 said:
Before the fastboot flash patched_boot.img command, I requested twrp of my stock firmware.
fastboot flash boot twrp-xz2.img
* fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
After that, it booted into recovery and installed the patched_boot.img and select boot partition.
After that, it was loaded into the system after the logo was loaded, it disappears and the black screen remains on, after that the reboot is permanent.
Help please solve the problem.
Click to expand...
Click to collapse
Do all the steps from the instructions and it will work
lolnwl said:
Do all the steps from the instructions and it will work
Click to expand...
Click to collapse
I took the boot.img file from the latest aosp firmware from MartinX3. Maybe I did something wrong?
---------- Post added at 04:22 PM ---------- Previous post was at 04:21 PM ----------
lolnwl said:
Do all the steps from the instructions and it will work
Click to expand...
Click to collapse
I took the boot.img file from the latest aosp firmware from MartinX3. Did I do this correctly or did I do something wrong?
---------- Post added at 04:22 PM ---------- Previous post was at 04:22 PM ----------
lolnwl said:
Do all the steps from the instructions and it will work
Click to expand...
Click to collapse
I took the boot.img file from the latest aosp firmware from MartinX3. Did I do this correctly or did I do something wrong?
---------- Post added at 04:22 PM ---------- Previous post was at 04:22 PM ----------
lolnwl said:
Do all the steps from the instructions and it will work
Click to expand...
Click to collapse
I took the boot.img file from the latest aosp firmware from MartinX3. Did I do this correctly or did I do something wrong?
alexsmel1 said:
I took the boot.img file from the latest aosp firmware from MartinX3. Maybe I did something wrong?
Click to expand...
Click to collapse
Get the boot.img from stock martinx3 recovery.
lolnwl said:
Get the boot.img from stock martinx3 recovery.
Click to expand...
Click to collapse
You will forgive me, but I don’t know where to boot.img file. I have firmware 52.0.A.3.84, in the stock_twrp_xz2_52.0.A.3.84 folder there are only such files twrp-xz2.img and vbmeta.img. I apologize for so many problems that have arisen because of me.
alexsmel1 said:
You will forgive me, but I don’t know where to boot.img file. I have firmware 52.0.A.3.84, in the stock_twrp_xz2_52.0.A.3.84 folder there are only such files twrp-xz2.img and vbmeta.img. I apologize for so many problems that have arisen because of me.
Click to expand...
Click to collapse
First of all you should update stock to the newest version to update all driver(52.0.A.3.202 is the newest with twrp support) and than unpack stock twrp and go to twrp-stock-installer and copy boot.img
lolnwl said:
First of all you should update stock to the newest version to update all driver(52.0.A.3.202 is the newest with twrp support) and than unpack stock twrp and go to twrp-stock-installer and copy boot.img
Click to expand...
Click to collapse
Thanks! Where you need to get userdata.img?
https://drive.google.com/file/d/1Ni_lU5jY3oQ4GDbezJ83BOLKNbLvU4ue/view?usp=sharing
lolnwl said:
https://drive.google.com/file/d/1Ni_lU5jY3oQ4GDbezJ83BOLKNbLvU4ue/view?usp=sharing
Click to expand...
Click to collapse
I really appreciate your work. I did everything according to the instructions:
fastboot erase system
fastboot flash userdata userdata.img
Fastboot flash system system.img (PixelExperienceP-arm-aonly)
fastboot flash boot patched_boot.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot
After that, my phone goes into reboot after the appearance of the logo. I do not know what to do. Sorry for the problems that I delivered. Help please fix it.
alexsmel1 said:
I really appreciate your work. I did everything according to the instructions:
fastboot erase system
fastboot flash userdata userdata.img
Fastboot flash system system.img (PixelExperienceP-arm-aonly)
fastboot flash boot patched_boot.img
fastboot --disable-verity --disable-verification flash vbmeta vbmeta.img
fastboot reboot
After that, my phone goes into reboot after the appearance of the logo. I do not know what to do. Sorry for the problems that I delivered. Help please fix it.
Click to expand...
Click to collapse
Our device is ab partition!!! A only gsi will not boot! Download ab version and give it a try
lolnwl said:
Our device is ab partition!!! A only gsi will not boot! Download ab version and give it a try
Click to expand...
Click to collapse
Thank you very much my friend !!!!!!!!!!! Thanks to you, I managed to do it finally. I am very happy for your help !!!!!!!!! Thank!!!!: о: о: о
alexsmel1 said:
Thank you very much my friend !!!!!!!!!!! Thanks to you, I managed to do it finally. I am very happy for your help !!!!!!!!! Thank!!!!: о: о: о
Click to expand...
Click to collapse
no problem
Nice that you want to give us a gsi guide.
And now my critics :silly:
Code:
1. You don't need to erase the system.
Flashing a partition does it too.
And we may have the erase bug in the bootloader, where executing the erase command on its own may take more than only 1 second.
Code:
2. You can flash the system.img in the twrp.
And of course wipe the userdata, too (userdata and internal storage due to encryption).
Code:
3. A styled guide with the XDA forum bbcode would be nice. :)
MartinX3 said:
Nice that you want to give us a gsi guide.
And now my critics :silly:
Code:
1. You don't need to erase the system.
Flashing a partition does it too.
And we may have the erase bug in the bootloader, where executing the erase command on its own may take more than only 1 second.
Code:
2. You can flash the system.img in the twrp.
And of course wipe the userdata, too (userdata and internal storage due to encryption).
Code:
3. A styled guide with the XDA forum bbcode would be nice. :)
Click to expand...
Click to collapse
Thanks for your reply. Its my first guide so it may not be the best.
I tried to flash system.img from twrp but after that flashlight did not work so I chosed fastboot for flashing
lolnwl said:
Thanks for your reply. Its my first guide so it may not be the best.
I tried to flash system.img from twrp but after that flashlight did not work so I chosed fastboot for flashing
Click to expand...
Click to collapse
Then the flash light start working?
Technically twrp should do the same