Phone not powering up - General Questions and Answers

Ok, so i am an idiot in terms of phones. I came to this site, ccause I KNOW that alot of intelligent people are there, and my question is.
So i have an Alcatel one touch idol ultra 6033x, and it does not power up. It charges and the blue led does glow when i connect it., but it doesnt boot up when i hold power. Nothing happens, no logo, nothing. I would like to know if it is possible to restore this phone without having to pay hundreds of dollars in a service. If its possible how can i do it.
Also, it started this way. I was watching youtube and it turned off cause of battery. I pluged it into the charger, It turned on but it was stuck on android logo, and after like 15 minutes i turned it off by holding the button. After that point it didnt work. Its not a soft brick, because it does not boot up and i dont think its a hardbrick, because when i tried using sp flash tool it did somehow detect it. Btw it was rooted but this didnt pose any problems until now.

Related

[Q] RIP to my Sidekick

So today, as i was on my way to work I accidentally held down the lockscreen button and the power menu popped up (I was on Glorious Overdoes V2) in the middle of a text and i pressed reboot accidentally... My phone never rebooted... It was stuck on the black Sidekick 4G/T-Mobile screen and then it would go black, then once again that screen would pop up... I removed the battery and put it back in, and without me pressing any buttons the same screen came back up... I let it sit for a while and after 20minutes nothing changed except the phone got really hot. Luckily I had my OLD Nokia in my car and popped my SIM card in it so that i could continue having a phone. I let The Sidekick sit for 4hours and it was extremely hot and then eventually it just turned off completely (Im assuming the battery drained, it was at 90% 4 hours before.) I got home, plugged it in and it wouldn't even turn on the charging screen. Somebody told me that my Motherboard is fried but I don't know. I called T-mobile and they're going to send me a new phone since it's still in the 1-year warranty period.
Anyone know if they're going to be able to inspect my old device and find out if i rooted/flashed it? because i can't get into it or anything to ODIN
I feel like they will try putting a new battery in it, and if it still wont turn on you should be fine.
It got hot because the CPU was churning over something and couldn't enter a low power state. I bet you could coax the phone into download mode and reflash it.
what do you mean coax the phone into download mode? by using the button combo to get it into download mode when turning on? I've tried that and it doesn't work. I tried rebooting into recovery and that wont work either. Also, it wont charge the battery anymore...
I've always had a hard time getting into download mode, and my phone works fine. I just spent 5 minutes trying different combinations until I got it.
I've heard people say trackpad-power button, volume down-home-power button, volume up/down-put battery in-plug in USB, etc etc etc. But the only method that works for me is to put in the battery, plug in the USB, wait for the charging screen, then hold volume down-trackpad-power, releasing power as soon as the screen goes black
You say your phone is turning on as soon as the battery is inserted? What if you have it plugged into USB first?
I had the exact same problem, I sent it into samsung and they just replaced a part(never told me which one) and it was fixed. I did noticed that when the sccreen was poped open to show the keyboard, it would stop. But it's probably a loose cable like I've read before.
Sent from my SGH-T839 using Tapatalk
Worst case scenario if you can't figure it out here on XDA, you could always sell it on eBay for parts as defective.

[Q] Bricked phone (in a weird way)

So it seems my phone has become a shiny paperweight. The thing is, I don't really understand why it happened. I've been reading how other people arrived at the same situation and although some symptoms are similar, I didn't do any of those things. I wasn't flashing anything, I didn't drop the phone etc
This is what happened: about 24 hours ago, I was using my phone as a GPS (google maps and waze) when it froze. No biggie, it had happened a few times before so I pulled out the battery, waited a few minutes, put the battery back and pressed the power button. The phone started as usual, it got past the HTC splash screen, the boot animation started. A few seconds (maybe 5) into the boot animation, out of reflex, I pressed the power button to turn off the screen. Don't ask why, dunno. As I've said, reflex. So the screen went black. And it stayed that way.
Since then I've been trying to bring it back to life. No luck yet. Here's the status of the phone:
Battery is not empty - when my phone froze yesterday it was about 80% full. I tried a different battery, no change
When I plug in the USB cable to charge it, the orange/green LED that usually lights up, well... doesn't
When I press the power button, the screen backlight turns on for 2 - 3 seconds, then turns off. Pressing VolDown+PWR does the same thing. I know it seems like a battery issue, but I'm pretty sure it isn't
The computer does not see the phone anymore when connected through an USB cable. 'adb devices' doesn't return anything and I don't see anything in the Device Manager (I was hoping for a QHSUSB_DLOAD but no such luck...)
The phone is a HTC Sensation 4G, HBOOT 1.17 (I think), S-OFF, rooted, was running InsertCoin 3.4.6/Android 2.3.5. As I've mentioned, I wasn't doing any of the things that usually lead to a bricked phone like trying to S-OFF/S-ON, flash a ROM etc. I'm currently reading the internets in an attempt to figure out what went wrong and how to fix it. These are the questions I'm trying to get an answer for:
When the phone boots, is it not in read only mode? At least when it gets to the boot animation part.... And if so, even if the power button is pressed... shouldn't the phone just turn off and that's it?
Since the phone seems to be as responsive as a... well, brick... If I send the phone to HTC to repair it, will they be able to tell it was S-OFF and all that?
Does this sound like something that JTAG could fix?
Thanks in advance for any help or info.
stealth.kid said:
So it seems my phone has become a shiny paperweight. The thing is, I don't really understand why it happened. I've been reading how other people arrived at the same situation and although some symptoms are similar, I didn't do any of those things. I wasn't flashing anything, I didn't drop the phone etc
This is what happened: about 24 hours ago, I was using my phone as a GPS (google maps and waze) when it froze. No biggie, it had happened a few times before so I pulled out the battery, waited a few minutes, put the battery back and pressed the power button. The phone started as usual, it got past the HTC splash screen, the boot animation started. A few seconds (maybe 5) into the boot animation, out of reflex, I pressed the power button to turn off the screen. Don't ask why, dunno. As I've said, reflex. So the screen went black. And it stayed that way.
Since then I've been trying to bring it back to life. No luck yet. Here's the status of the phone:
Battery is not empty - when my phone froze yesterday it was about 80% full. I tried a different battery, no change
When I plug in the USB cable to charge it, the orange/green LED that usually lights up, well... doesn't
When I press the power button, the screen backlight turns on for 2 - 3 seconds, then turns off. Pressing VolDown+PWR does the same thing. I know it seems like a battery issue, but I'm pretty sure it isn't
The computer does not see the phone anymore when connected through an USB cable. 'adb devices' doesn't return anything and I don't see anything in the Device Manager (I was hoping for a QHSUSB_DLOAD but no such luck...)
The phone is a HTC Sensation 4G, HBOOT 1.17 (I think), S-OFF, rooted, was running InsertCoin 3.4.6/Android 2.3.5. As I've mentioned, I wasn't doing any of the things that usually lead to a bricked phone like trying to S-OFF/S-ON, flash a ROM etc. I'm currently reading the internets in an attempt to figure out what went wrong and how to fix it. These are the questions I'm trying to get an answer for:
When the phone boots, is it not in read only mode? At least when it gets to the boot animation part.... And if so, even if the power button is pressed... shouldn't the phone just turn off and that's it?
Since the phone seems to be as responsive as a... well, brick... If I send the phone to HTC to repair it, will they be able to tell it was S-OFF and all that?
Does this sound like something that JTAG could fix?
Thanks in advance for any help or info.
Click to expand...
Click to collapse
It reminds me Desire S problem - fried emmc chip... If your phone has no valid warranty, I'm suggesting to see phone's internals and inspect emmc chip.
The phone still has warranty, I will try to have it repaired/replaced. The only thing I'm concerned about is the fact that it was S-OFF and running a custom ROM... And I don't have the knowledge or equipment to try to take it apart and fix it myself
If you have warranty just use it they won't be able to ckeck if phone was unlocked or not since it can't boot up.

[Q] How to Load Androis ios to phone

Sorry if i cant make a threat about this here.
I was wondering how to load android ios to my motorola droid ultra.
I was factory reseting my phone, since the phone had issues with shutting off randomly, well it shut off in the middle of the process, so i have a soft bricked phone. Wont boot up to anything since it doesnt have nothing to boot up to, sincei t turned off in the middle of reseting the phone.
I went to hard reset after it happend, and clicked to recovey, but theres no recovery either.
Is there a way i can load androi to it via odin or something? Dont want to buy another mother board to swap it. Thanks...
fevera1985 said:
Sorry if i cant make a threat about this here.
I was wondering how to load android ios to my motorola droid ultra.
I was factory reseting my phone, since the phone had issues with shutting off randomly, well it shut off in the middle of the process, so i have a soft bricked phone. Wont boot up to anything since it doesnt have nothing to boot up to, sincei t turned off in the middle of reseting the phone.
I went to hard reset after it happend, and clicked to recovey, but theres no recovery either.
Is there a way i can load androi to it via odin or something? Dont want to buy another mother board to swap it. Thanks...
Click to expand...
Click to collapse
Can it boot to bootloader?
The Dirtydee Z3
Now its good to go, booted up to normal .
I think the issue is the battery tho.
Randomly it shuts off... It wont turn unless i insert the charger, if i remove it it ****s off. Sometimes when its on and the charger is inserted the battery level shows 100%. Other tines if the phone turns on without the charger battery level says 65% but if i insert the charger it shows as 100% again. I also read that it can be over heating thats why it shuts iff randomly but it shuts off every 10 to 20 mns or even less..
Any ideas?

[Q] Phone wont turn on after not using for a month.

was running a solid PA 5.0 Rom then My screen broke about a month ago so I broke out one of my cheap $30 Wal-Mart phones until I decided what to do with it. Finally decided to get a screen + digitizer kit, replaced it all no problem went to turn it on and had a red light blink for a few seconds and then nothing. . Tried all volume & power button combos but no dice. Been trying and googling for days now. I can plug my phone into a pc and get it into adb fastboot mode by holding vol- and power button sometimes it gets recognized a mtp usb device but wont install any drivers and if I hold all three buttons it shows up as qhusb_bulk but it still won't boot up normally tho and nothing displaying in the screen. bought it from swappa over a year ago so the warranty is probably up. any suggestions?
qhusb is a brick. Try and follow this guide:
http://forum.xda-developers.com/google-nexus-5/general/fix-unbrick-nexus-5-stucked-qualcomm-hs-t3043301
I had the same thing. Phone in a drawer and red light fluttered then that was that. I put a new battery in.
As you probably know when the battery dies there its in fact 10% left for boot up. In my case it had gone to zero so there was nothing to power the charging circuits etc. Worked for me. I found a way to charge the other later and it's a spare
SENT BY ENTANGLEMENT
theesotericone said:
qhusb is a brick. Try and follow this guide:
http://forum.xda-developers.com/google-nexus-5/general/fix-unbrick-nexus-5-stucked-qualcomm-hs-t3043301
Click to expand...
Click to collapse
alright did that now it gets recognized on my computer as normal and phone vibrates when i turn it on, guessing the screen i got was bad cuz that still doesn't work, I'll just send it back and get a new one. many Thanks!

Poco X3 NFC - Can't access bootloader, fastboot or system (bootloop)

Hi. My close friend has this issue. I'm posting this because she can't figure it out by herself. A month ago, her phone downloaded an update and she installed it. Since then, the phone has restarted by itself without any reason, just random restarts and the frequency of restarts was more frequent with each day. Fast forward to this day and the phone is constantly turning up and shows the POCO logo and restarts by itself. This loop is not ending until the battery is completely dead. When trying to access fastboot or recovery mode, she can get there but only for few seconds (until the device restarts again) which is not enough time to make any changes / factory reset. She did not accessed developer tools in system, so the bootloader is still locked. Holding down power button does nothing. ONE SINGLE UPDATE screwed up whole phone. Can't do ****. There's no SD card or SIM card in the slot. Is there any "hack" to stop the phone from restarting itself? Note when the battery is completely empty and she plugs the charger, the whole nightmare starts again. I'm lost. Did you guys have any ideas what to do? Or is the repair centre only solution? (She cracked glass of the display, i'm not sure if that voids warranty. [it's not glass COVER, it's the glass which is part of the display])
Is this device unlocked? If not, then RMA.
If it is, my best guess is to get the device into recovery (or fastboot?) and immediately connect to PC.
If it holds, leave it there as it will charge, although at much slower rate.
When charged, use TWRP to try to reboot to system.
If it doesn't work, then factory reset.
Sadly, i can not get to recovery because in about 2 seconds the device will reboot. There's literally no time to make any changes - factory reset. Also the device is not unlocked. I hope RMA accept the phone even though it has cracked screen . Thanks for response anyway
Then RMA it is. If you're in EU they'll have to take it, even with the cracked screen.
But does the reboot happen even when connected to PC? Two seconds is enough to plug it in if you're fast...
Yeah, we tried every possible idea we can think of. Pressing the toggle button from different angles with different intensity to make sure it isn't stuck inside, covering up the proximity sensor (yeah makes no sense but even that we tried, lol). Tried with connected to PC as with classical charging brick. No change. Back in those days where smartphones doesn't have unibody construction and you were able to take down the back cover and remove battery it was way simple. Nowadays it's not possible to stop the phone from booting itself until battery is completely empty. My friend says the problem started about month ago, when the phone annouced that there is an update available so she downloaded it and installed it. Before that, there was no problem with the phone whatsoever. Maybe it's caused by some kind of virus but IDK which apps she was using. She didn't have rooted phone not unlocked bootloader in developer tools. Also i googled that it may be caused by "Airtel Thanks" app which she didn't have installed aswell. I will keep this thread updated as what happend to the phone cause i'm also interested what went wrong and to help future users who will struggle with this problem a solution. Thank you.
CaptainFedora, did you solve the problem? I have the same issue...
Yeah, actually. Sorry for not posting the answer although it was definitely her fault. It was the power button being pressed down (which made continuous bootloop). But the button was somehow pressed deep into the phone's body. So complete dissasembly was needed.
Btw. my friend lives in other country so we discussed this problem over internet. If i could have the phone physically with me i would definitely know what was the problem.
Hi.
Yesterday I had the same problem, the device kept restarting every 10 seconds, it didn't even come to any screen besides the first one with the POCO logo in yellow.
Things I tried that did NOT work:
restart
hard restart
fastboot (it did enter the fastboot mode, but only showing the picture of the 2 robots and after 10 seconds restarting again to the POCO logo image)
plug it to power
plug it to computer
After 3 hours of continuous restarting and trying anything I could find in the internet and I could imagine of (except extracting the battery because it seemed complicated and difficult to revert), I tried randomly something that miraculously worked...don't ask me why.
pressing the power button shortly and quickly around 30 times (it might have worked after 10 or 20, but I just kept doing it a little longer
Afterwards it just started as if nothing had happened...doesn't make any sense, but I just wanted to tell you in case you are in a similar situation and desperate to not lose all the images and videos as I was yesterday.

Categories

Resources