[Q] Phone wont turn on after not using for a month. - Nexus 5 Q&A, Help & Troubleshooting

was running a solid PA 5.0 Rom then My screen broke about a month ago so I broke out one of my cheap $30 Wal-Mart phones until I decided what to do with it. Finally decided to get a screen + digitizer kit, replaced it all no problem went to turn it on and had a red light blink for a few seconds and then nothing. . Tried all volume & power button combos but no dice. Been trying and googling for days now. I can plug my phone into a pc and get it into adb fastboot mode by holding vol- and power button sometimes it gets recognized a mtp usb device but wont install any drivers and if I hold all three buttons it shows up as qhusb_bulk but it still won't boot up normally tho and nothing displaying in the screen. bought it from swappa over a year ago so the warranty is probably up. any suggestions?

qhusb is a brick. Try and follow this guide:
http://forum.xda-developers.com/google-nexus-5/general/fix-unbrick-nexus-5-stucked-qualcomm-hs-t3043301

I had the same thing. Phone in a drawer and red light fluttered then that was that. I put a new battery in.
As you probably know when the battery dies there its in fact 10% left for boot up. In my case it had gone to zero so there was nothing to power the charging circuits etc. Worked for me. I found a way to charge the other later and it's a spare
SENT BY ENTANGLEMENT

theesotericone said:
qhusb is a brick. Try and follow this guide:
http://forum.xda-developers.com/google-nexus-5/general/fix-unbrick-nexus-5-stucked-qualcomm-hs-t3043301
Click to expand...
Click to collapse
alright did that now it gets recognized on my computer as normal and phone vibrates when i turn it on, guessing the screen i got was bad cuz that still doesn't work, I'll just send it back and get a new one. many Thanks!

Related

[Q] RIP to my Sidekick

So today, as i was on my way to work I accidentally held down the lockscreen button and the power menu popped up (I was on Glorious Overdoes V2) in the middle of a text and i pressed reboot accidentally... My phone never rebooted... It was stuck on the black Sidekick 4G/T-Mobile screen and then it would go black, then once again that screen would pop up... I removed the battery and put it back in, and without me pressing any buttons the same screen came back up... I let it sit for a while and after 20minutes nothing changed except the phone got really hot. Luckily I had my OLD Nokia in my car and popped my SIM card in it so that i could continue having a phone. I let The Sidekick sit for 4hours and it was extremely hot and then eventually it just turned off completely (Im assuming the battery drained, it was at 90% 4 hours before.) I got home, plugged it in and it wouldn't even turn on the charging screen. Somebody told me that my Motherboard is fried but I don't know. I called T-mobile and they're going to send me a new phone since it's still in the 1-year warranty period.
Anyone know if they're going to be able to inspect my old device and find out if i rooted/flashed it? because i can't get into it or anything to ODIN
I feel like they will try putting a new battery in it, and if it still wont turn on you should be fine.
It got hot because the CPU was churning over something and couldn't enter a low power state. I bet you could coax the phone into download mode and reflash it.
what do you mean coax the phone into download mode? by using the button combo to get it into download mode when turning on? I've tried that and it doesn't work. I tried rebooting into recovery and that wont work either. Also, it wont charge the battery anymore...
I've always had a hard time getting into download mode, and my phone works fine. I just spent 5 minutes trying different combinations until I got it.
I've heard people say trackpad-power button, volume down-home-power button, volume up/down-put battery in-plug in USB, etc etc etc. But the only method that works for me is to put in the battery, plug in the USB, wait for the charging screen, then hold volume down-trackpad-power, releasing power as soon as the screen goes black
You say your phone is turning on as soon as the battery is inserted? What if you have it plugged into USB first?
I had the exact same problem, I sent it into samsung and they just replaced a part(never told me which one) and it was fixed. I did noticed that when the sccreen was poped open to show the keyboard, it would stop. But it's probably a loose cable like I've read before.
Sent from my SGH-T839 using Tapatalk
Worst case scenario if you can't figure it out here on XDA, you could always sell it on eBay for parts as defective.

[Q] Infuse bootloop

Im trying to explain everything to prevent unneeded questions
I have viewed several threads about this but absolutely none with an answer. My Samsung Infuse 4g with at&t (nonrooted) is in a bootloop. The cause of this was my every-other-day reboot. Once I turned it back on it goes to the samsung screen for about 5 secs, then goes black, then says samsung again and so on repeatedly. I pull the battery and as soon as it makes contact back with the phone it turns on by itself into the same Samsung screen over and over. When plugged into wall or computer it will show the charge screen where there is no battery life left, then it will flash and start up the charge screen again and so on just like the samsung screen. I cannot go into download mode (the buttons, at this point, do nothing. No response)
I have tried taking the battery out and plugging in usb cable to computer, then holding both volumes and putting battery in=charging loop
↑ with volume up=charging loop
↑↑ with volume down=charging loop
computer doesnt detect it, adb cant find it, cannot go into download mode, odin cant see it, heimdall cant see it, cant actually boot into anything, cant leave battery in or else phone will restart itself the entire time, and this was caused by my (already gbread) infuse 4g doing a regular reboot (aka power button, tap power off, after phone is confirmed off take battery out, battery back in, turn on)
Recommendations at this point? on a scale from 1=noob to 10=expert im a 7 on this type of thing. Ive always heard that as long as you can boot into a picture its only soft bricked but if i was right i wouldnt be here. Any and all help would be much appreciated. If you need me to post a video I would have NO problem doing that showing everything im doing.
oh, and by I have viewed several threads about this i meant that i have only been able to find 1 thread about it and 2 links that didnt work for me but might for you
link that worked- http://forum.xda-developers.com/archive/index.php/t-1354731.html
links that did not-
http://www.google.com/url?sa=t&rct=...ih1Zf_BvtcIbJXGEw&sig2=jjOcukFWr9sPWJZH1rlhnA
http://www.google.com/url?sa=t&rct=...ih1Zf_BvtcIbJXGEw&sig2=SZeMzIF2hnjdkk6GPDkovg
You might have already tried this way, but I've always held down both volume buttons first before plugging in the USB cord - not the other way around. You can also try different cords, different USB ports and/or different computers.
Mine was doing this the other day and it turned out to be my SD card being flaky. Maybe try taking it out and booting?
Radiotsar said:
You might have already tried this way, but I've always held down both volume buttons first before plugging in the USB cord - not the other way around. You can also try different cords, different USB ports and/or different computers.
Click to expand...
Click to collapse
Ive tried a hp touchpad cord, an atrix cord, and the original cord. I cant really do the button combo because as soon as the battery makes contact the phone turns on. thats why i had the usb cord in first to see if it worked. ive tried every usb port and 2 different laptops, the computer wont recognize it if the phone wont go past the samsung start up screen
J101 said:
Mine was doing this the other day and it turned out to be my SD card being flaky. Maybe try taking it out and booting?
Click to expand...
Click to collapse
I've taken the card out and used a different card, nothing. Tried taking sim card out, nothing.
I should have been clearer. Leave the battery out of the process until after attaching the cord and the screen coming up.
Sent from my SGH-I997 using xda premium
Radiotsar said:
I should have been clearer. Leave the battery out of the process until after attaching the cord and the screen coming up.
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
I do, every time.
1. battery out
2. hold down volume buttons (any combo)
3. attach cord (nothing happens, no screen, nothing)
4. put battery in
Results= Charging loop
lifetaker said:
I do, every time.
1. battery out
2. hold down volume buttons (any combo)
3. attach cord (nothing happens, no screen, nothing)
4. put battery in
Results= Charging loop
Click to expand...
Click to collapse
should be the same...wonder if you battery needs to be charged first, it should be fully charged at best...to do any flash/Odin/one click
this how I do it...basicly the same..
>take batt out
>plug in usb cable...to both phone and computer
>hold both volume buttons...NO NOT HOLD THE POWER BUTTON....
>put batt in...
and bam should see the android dude shoveling in yellow triangle...
If you get no response from the usb without the battery, and inserting the battery indicates the battery needs charging - I'd suspect the phone's usb port. Especially after trying different cords & computers.
Sent from my SGH-I997 using xda premium
Sorry for the sometimes choppy video recording.
http://www.youtube.com/watch?v=QWKdGS_5_Ps&feature=youtu.be
Have you tried a jig you can buy them on ebay for 6-12 bucks or you can donate one of you old cables and make it your self..
http://galaxys2root.com/galaxy-s2-hacks/how-to-make-a-usb-jig-for-your-galaxy-s2/
this will/should get you into download mode
Hello.
I have the same problem... tried also everything now i gave it to cellphone shop, i hope you guys can give me answer before i am gonna waist $100
HELP?1
Help me please
I was in this state. There are two options I can think of. A JIG as mentioned previously or the Heimdall One-Click-Unbrick. The one-click unbrick did it for me and got me back to cmw and download mode, then i could flash to stock, root and flash up to ICS. It was really easy and I stopped sweating once it booted to cmw instantly after running it.
Joe
hello.
The problem is when i connect it to my computer its keep disconnecting and doing terreble noise, (windows noise) when you keep connecting and disconnecting USB cable
JIG DIDNT WORK, because the same problem.... maybe the chargging connect is broken? or has a corrosion?
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
Sounds/Looks like a hardware issue...
Did it get any water damage in the past?
Hope you got warranty or still under warranty.
I am having exactly the same problem. My Infuse has never been rooted or unlocked (quite ironically, I was about to root it for the first time).
Boot loop when not plugged in, charge loop when plugged in. Absolutely no combination of buttons, inserting/removing the battery, and/or plugging/unplugging the USB has gotten it to do anything.
This has happened several times over the past few days. The first few times it sorted itself out in an hour or two. Today I couldn't get it to do anything at all.
I found several posts by people who have this problem, and it has never been conclusively solved from what I've seen. Finally one person said they fixed it by lightly smacking the phone with their hand. Lo and behold, it came on for about 5 minutes before looping again. So I smacked it again, and before it could re-loop, I factory reset it. A few hours went by and I was convinced that it was fixed.
A few minutes ago I had it plugged in to my computer via USB and was getting ready to SuperOneClick it. Then it went back into loop. I can't get it to come on this time. Again, no combination of buttons will send it into download mode. The computer can't see it. The battery is charged. The USB cable and port are fine. The software was reset earlier today. Does this mean that I have a hardware problem, or is there a software issue that could be fixable?
EDIT: So I decided to try hitting the power button, something that had never worked to this point, and the device came on. A couple minutes later it went back to boot loop. On a whim I tried download mode, which had stubbornly refused to work all day. Of course it immediately worked. Not really knowing what to try, since I'd already wiped user data, I wiped cache data and formatted the internal SD. Then I told it to reboot. Back to boot loop. A few minutes later, it came back on with the power button. Two minutes later, boot loop again. Then it restarted of its own accord. And now back to boot loop. I just don't even know anymore.
EDIT2: Just a thought... Something is weird with the power button. Whenever the phone is on and I hit power (briefly, not holding it down), it goes to the shutdown menu as though I'd held it down. A few seconds later, I'm always back in boot loop.
Infuse loop
I have found the problem. It is, in my case, the power button. I removed the case and crossed terminals with a paperclip. BAM. Booted up, and when I removed the paper clip.... back to boot loop at Samsung logo.
There is a place to send the phone. Ive see great reviews.
mobiletechvideos.mybigcommerce.com/samsung-infuse-4g-power-button-repair/
Seems like there has been a string of power button malfunctions going around lately. There are a few threads going on where people have had this issue. Sometimes its just the terminals needing to be cleaned or dust blown out.

[Q] Phone won't charge, no LED, USB makes on/off sounds but won't recognize device

Hello! Last night, my phone died while I was out. When I got home, I plugged it into the wall charger and I noticed the LED didn't come on. I left it charging overnight for about 6 hours and tried to turn it on - no luck. I read on another topic that you needed to charge it to ~2% through USB for it to begin charging on the wall if it's "too" dead, so I left it on my laptop for an hour but again with no luck. I did notice that my laptop couldn't recognize a device though, and since my phone was the only thing plugged in, it means my phone was 'on'. I held the power button and the device disconnected, held the power button again, the unknown device reconnected. So my phone is turning on and off, so I wondered it was my screen. I turned it on, but no sounds worked when I messed with the volume button, so I'm going to rule the screen out. Despite being able to turn 'on', I can't get into recovery and it won't truly turn on.
I'm rooted and unlocked, running a version of PA, though I haven't updated it in some months and haven't downloaded anything other than a picture or two to my phone recently, so I don't think I've bricked it or anything.
I've never used ADB or fastboot or anything like that, so if there's a solution through that I'd be happy to try it out. If there's anything I forgot to mention, please tell me!
Thanks in advance for any help I can get.
This has happened to some people. It seems like going completely dead can somehow corrupt something in the firmware in rare cases.
Open Device Manager and plug in your phone, then see what pops up. If you see QHUSB_DLOAD, your phone has bricked, but it may be fixable. Check into the Unbricking Evita thread and see if the guys there can help.
Failing that, get a warranty exchange.
Try different button combinations (hold power, or hboot combination) while the phone is plugged into the wall charger. At least one person I was trying to help, got his phone to power on this way, when nothing else seemed to work.
Sounds like you're phone is in qdl mode. i second trying the unbricking thread.

Z3 will not turn on no matter what

So this morning i unplugged my phone, fully charged, and used a flashlight app. Then all of the sudden my phone just went black and i have not been able to get it to do anything for over an hour and a half now. No matter what i do it will not turn on. Ive tried to power button/rockers combo to get it to turn on, nothing, Ive tried the little button in the sd card compartment, nothing.... Anyone else have this issue? I cannot find anything on the Z3 for this, only stuff for the older models... Thanks.
Hold volume up and power button until the phone vibrates. Then connect a USB cable to your computer while holding volume down on the phone. If the phone is recognised by the pc you should be able to flash your phone using flash tool and hopefully that will get you back up and running. That's the only solution I can think of. Maybe some other members might be able to help if this don't work.
nobby00900 said:
Hold volume up and power button until the phone vibrates. Then connect a USB cable to your computer while holding volume down on the phone. If the phone is recognised by the pc you should be able to flash your phone using flash tool and hopefully that will get you back up and running. That's the only solution I can think of. Maybe some other members might be able to help if this don't work.
Click to expand...
Click to collapse
Nothing... I cant get the phone to do anything at all. I really do not understand.
I can't help then mate other than suggesting taking it back to where you got it from or sending it to Sony. Hopefully somebody else can help you out to save you the hassle
Planeck said:
Nothing... I cant get the phone to do anything at all. I really do not understand.
Click to expand...
Click to collapse
Did you hold the buttons in for ages; literally 20 or 30 seconds?
poldie said:
Did you hold the buttons in for ages; literally 20 or 30 seconds?
Click to expand...
Click to collapse
Over a minute, still nothing
Planeck said:
Over a minute, still nothing
Click to expand...
Click to collapse
Hello, my girlfriend have the same problem in his Xperia Z3. When she works his phone lying on the desk. She want call to me and the power/lock button don't work. She call to me from other mobile phone and she describe problem. After 10 seconds search in google I find a way to restart phone. She pressed little yellow switch under nano Sim/micro SD plug. Phone power down and never give up. Power button is dead, combinations : vol+ and power , vol- and power, vol+ and vol- and power also didn't work. When I plug the USB cable the charging will start normally. In screen I have a big battery icon with animation.
Maybe someone have similar problem with Z3 and know a solution??
Well if its the button, tap to wake could solve the problem till you decide to get it repaired.
It could also be a battery issue. Try charging for a few hours on a charger and then try turning on after connecting to a PC with phone drivers by holding the power button for like 10secs. That is the method used for HTC phones with similar issues.
The HTC One X had battery issues for some where it would not turn on until it was connected to thr charger for a few hours. I had, had the same issue you mentioned and tried the method mentioned above but never turned on. Repair shop tested the battery and eventually had to replace a bad mothetboard.
That is not normal and even if you could get it back from that sort of failure, you don't want this device unless it is fixed or replaced.
abhinav.tella said:
Well if its the button, tap to wake could solve the problem till you decide to get it repaired.
It could also be a battery issue. Try charging for a few hours on a charger and then try turning on after connecting to a PC with phone drivers by holding the power button for like 10secs. That is the method used for HTC phones with similar issues.
The HTC One X had battery issues for some where it would not turn on until it was connected to thr charger for a few hours. I had, had the same issue you mentioned and tried the method mentioned above but never turned on. Repair shop tested the battery and eventually had to replace a bad mothetboard.
Click to expand...
Click to collapse
Still nothing. Power/unlock button is dead. Today I go to sell point (T-mobile Poland ) and leave for warranty repair. I used Xperia Z3 for 2 weeks
If you are within 14 days TMO should give you a brand new device.
I'm having the same problem too. I tried to use the flashlight app for the first time and it just completely bricked my Z3.
abhinav.tella said:
If you are within 14 days TMO should give you a brand new device.
Click to expand...
Click to collapse
acpg100 said:
I'm having the same problem too. I tried to use the flashlight app for the first time and it just completely bricked my Z3.
Click to expand...
Click to collapse
Hello,
Xperia Z3 back from repair few days ago. Message from service: hardware repair, updated soft, phone is 100% functionality and compatible with specification from producer.
Ive just received my z3 as replacement for g flex and its from Plus poland lol.
Sent from my Xperia Z3 using XDA Free mobile app
Just happened to me today- Xperia Z3 Compact
So last night, i left my phone to charge after reaching 5%. When I woke up, my phone won't start and it won't charge either. The LED indicator was not lighting when it is plugged.
I tried every trick:
1. Pressed down the power button in different lengths.
2. No. 1 but with the volume down key
3. Pressed down the yellow button on the sim card tray
4. Tested 5 different charger heads and different wires
5. Tried connecting to 2 different laptops to see if my phone will be recognized
I work close by a Sony Center so I was planning on passing by after work. I was already having a really bad day and my phone is not under warranty. Throughout the morning, I'd randomly check the power button if it will finally work. FORTUNATELY, during lunch, the LED indicator finally lit up! The batt was drained so I had to charge it and wait a few minutes before turning it on. Finally it's on. I don't know what the eff happened or if it is really resolved.
I'd still want to know what the hell is wrong with Xperia Z phones??
Mines 'died' twice, both times the only way I could get it to turn back on was to connect to magnetic charger dock/cable
this is really works on me.. !!! try this one.....
anthgabb said:
So last night, i left my phone to charge after reaching 5%. When I woke up, my phone won't start and it won't charge either. The LED indicator was not lighting when it is plugged.
I tried every trick:
1. Pressed down the power button in different lengths.
2. No. 1 but with the volume down key
3. Pressed down the yellow button on the sim card tray
4. Tested 5 different charger heads and different wires
5. Tried connecting to 2 different laptops to see if my phone will be recognized
I work close by a Sony Center so I was planning on passing by after work. I was already having a really bad day and my phone is not under warranty. Throughout the morning, I'd randomly check the power button if it will finally work. FORTUNATELY, during lunch, the LED indicator finally lit up! The batt was drained so I had to charge it and wait a few minutes before turning it on. Finally it's on. I don't know what the eff happened or if it is really resolved.
I'd still want to know what the hell is wrong with Xperia Z phones??
Click to expand...
Click to collapse
just do the no .3 ... and it works to me... thank u for posting this .. it helps me a lot.......
It's called the 'sudden death' bug and a small number of sony xperia phones die from it., including the Z3. It is more common in the Z3 Compact (I suffered from it and had to get it replaced). Just google sony Z3 sudden death.
Did the OP use a quick charger on his Z3? The reason I ask is that the repairer I sent my Z3C to originally said the motherboard was gone and needed to be replaced, possibly cased by current. I used to use a quick charger on my Z3C and wonder if it caused it as the phone worked perfectly for 6 weeks before dying.
There are several so called fixes and workarounds that work for some people, not all. Only a motherboard replacement fixes it properly.
Fix for Z3 not powering up / no charge LED
My Z3 would not power up and no charge LED when cable plugged in. Finally found this solution on Sonymobile support website which fixed my phone!
To force the device to restart
Detach the SIM card slot cover.
Using the tip of a pen or similar object, press and hold down the small OFF button (generally indicated by the text "OFF") until the device has emitted three vibrations, and then release the OFF button. The device turns off automatically.
Charge the device until a charging icon appears on the screen.
Turn on your Xperia™ device.
If a forced restart procedure as described above doesn't succeed in turning on your device, you should try another kind of forced restart - the 2-minute restart procedure.
To force a 2-minute restart
Detach the SIM card slot cover.
Using the tip of a pen or similar object, press and hold down the small OFF button (generally indicated by the text "OFF") for 120 seconds (ignoring any vibrations), and then release the OFF button.
Charge the device until a charging icon appears on the screen.
Turn on your Xperia™ device.
I had to hold the 'off' button for about 60 seconds before the phone vibrated and sprung into life - phew!
I bought mine with the broken screen so I don't know for sure what happened. Bid won for $37
The led light came on when plugged in, but no vibrations. The computer recognized it and installed as the D6633. Properties show the battery had charged to 29%, 60%, 99%.
But clicking into it just shows a blank page. No folders, drive volumes, or anything.
However if it is not hooked up to a charger or computer then as well as no vibration there is no lights either. Does get a little warm though.
Bought the new display and powerflex. Still wont turn on, no vibrations, and only shows led when plugged in.
Tried the volume up, down, power, all three, reset button in sim tray.
PC Companion can't work with it. It almost worked once but said if there was a google account and I did not have the info I would be facing the whole account lock fiasco....No thank you. Can't even get it to recognize it for that option properly anymore anyway.
Could easily connect it into fastboot mode, but getting it into flash mode took much much much more effort. But eventually I did and flashed an image with flash tool. Went fine. Flashed everything......NO CHANGE......
I'm guessing at this point maybe the board was more damaged than seems....Though it's weird how the computer recognizes it and can flash everything.
Or there is a damaged power IC, transistor, capacitor, or something.
I really hope Sony took care of this in the Z5 and it is no longer an issue in future devices. It was said in a few comments above that only a few people are affected....Yet there are endless searches and pages with a dramatic number of users facing it.

Bootloop + Power Menu problem

So today i started having bootloops, it was showing the Powered by Android screen for 2 seconds then booting again over and over for few hours
Now after it somehow got fixed by itself, i managed to turn the phone ON and to clear Cache
So far there are not bootloops anymore
BUT
huge BUT
the phone is poping the Power Menu most of the time, and then every touch on the screen just "presses" on the Shut Down option
If i press on the Power button myself it shut him down automatically ...
EDIT:
Would like to add, that i never unlocked it, it's the regular OTA version.
I doubt a wipe wll help, but i really wont mind if thats the case
Its almost like something pressing the Power button sometimes, but even WITHOUT the back case it still pops that power menu. even if no one is touching it at all it still pops it once in a while, which cause shut downs once in a while ...
So i woke up
The phone is off, i cant turn it on
I charge it for few hours already and still nothing happens the power button doesnt do nothing, it doesnt vibrate
So i connect it to my PC, it shows it as a Marshal something in the device manager but it KEEPS disconnecting and reconnecting every 2 seconds
I have found a "fix ur bricked phone" threads but they all using a tool that needs the phone connected to the PC, well my phone cant stay connected more than 5 seconds for some reason [ different cables, different computers] it keeps on popping in and out
Did you drop your phone in the water or something? Wet or damp from the rain maybe?
And did you try connecting it while in fastboot or recovery mode?
Maybe wet from Humidity but thats all
i cant reach fastboot nor recovery
as now it all black, not turning on not even for a bootloop
This problem happen when the phone is getting wet ? its certainly didn't but maybe i should "fix" it as a wet phone should be fixed? should i open it and dry it out? maybe take the battery out? its not that easy to take it out tho
I had a phone which was wet from the rain, it made the power button faulty. It would randomly turn screen on off like in your case. I took it to the repair shop and they cleaned the insides and it was fine again. If you're sure it's not the rain or anything then maybe that's not the reason, just a guess.
How about plugging in the charger? Does it light up? If it lit up and you cant turn it on after maybe its the power button problem.
elemti said:
I had a phone which was wet from the rain, it made the power button faulty. It would randomly turn screen on off like in your case. I took it to the repair shop and they cleaned the insides and it was fine again. If you're sure it's not the rain or anything then maybe that's not the reason, just a guess.
How about plugging in the charger? Does it light up? If it lit up and you cant turn it on after maybe its the power button problem.
Click to expand...
Click to collapse
plugging the charger doesnt do nothing
Although i got a portable charger with a led , the led turns on when i plug the One, BUT, the led bar doesnt decrease even after few hours, so its like "trying" to charge but not charging anything
Try this from OnePlus Customer Support:
2. Power cycle the One by holding the Power button for 20 seconds 5 times.
3. Attempt to start the phone by holding down the Power button along with the Volume down button to start recovery mode and performing a factory reset.
Click to expand...
Click to collapse
or hold Power button with the Volumn up button to see if you can get into fastboot mode.
lol bro... seriously.. you really think i didnt try that stuff before opening a thread?
I already scanned the entire web and no one with the same issue have posted a fix thread
one plus doesnt even care about their customers
Is this the guide you said you saw? http://forum.xda-developers.com/oneplus-one/general/guide-unbrick-oneplus-one-t3013732
Why not give it a try? Follow the steps and see if you are able to unbrick your phone.
I mean there's not much you can do if you can't even turn on your device in the first place :/

Categories

Resources