Related
Hi,
I was looking for developer who can make kernel (would be awesome also a rom) for MTK6592 especially for Doogee DG550. If you don't have DG550 never mind. Owners can buy you one. We will be so grateful.
Here is kernel source:
https://github.com/tpruvot/MT6592-KK-KERNEL
Thank you very much.
Mattthev said:
Hi,
I was looking for developer who can make kernel (would be awesome also a rom) for MTK6592 especially for Doogee DG550. If you don't have DG550 never mind. Owners can buy you one. We will be so grateful.
Here is kernel source:
https://github.com/tpruvot/MT6592-KK-KERNEL
Thank you very much.
Click to expand...
Click to collapse
i can build bt is abv kernel source nd drivers for dg550 ??
[email protected] said:
i can build bt is abv kernel source nd drivers for dg550 ??
Click to expand...
Click to collapse
Hi man, would be awesome. Are system img and boot img enough for you?
I posted it here:
http://www.needrom.com/download/dg550-kitkat-02112015-blackview-dm550/
It's just rebranded DG550 and it's better than original rom by Doogee (causes battery draining) and they also fix time from internet and other stuff...
Well, all MT6592 are "ALPS". AFAIK
Please provide proper LCM Driver, etc.
As i have the same device i'm very interested.
Files u provided are way not enough for a "simple" build
Currently i'm running this Phone at stock kernel with DarkL privat port. It gives me up to 5days battery on moderated use. So the stock dg550 Kernel is fine already, at least on the battery side ofc
However in my opinion there is no reason why somebody would donate a developer this phone. It cost around 135€. People would have more benefits if they just buy a new, cheaper and more powerful phone while dumping this one.
If u like a good Rom, u can still try port cm12.1 from mt6592 plattform. We might just miss steps in ramdisk
Traace said:
Well, all MT6592 are "ALPS". AFAIK
Please provide proper LCM Driver, etc.
As i have the same device i'm very interested.
Files u provided are way not enough for a "simple" build
Currently i'm running this Phone at stock kernel with DarkL privat port. It gives me up to 5days battery on moderated use. So the stock dg550 Kernel is fine already, at least on the battery side ofc
However in my opinion there is no reason why somebody would donate a developer this phone. It cost around 135€. People would have more benefits if they just buy a new, cheaper and more powerful phone while dumping this one.
If u like a good Rom, u can still try port cm12.1 from mt6592 plattform. We might just miss steps in ramdisk
Click to expand...
Click to collapse
I've contacted Doogee on some e-mails so be in touch. They post on FB post about developing roms for their phones. Does anybody know if they truly pick someone from XDA or 4pda?
Could some one please compile TWRP 2.8.7 or 2.8.6 for DG550? I tried but no success only boot loop
They dont share source. U can use stock Kernel and build cm around. Like few guys here.
Please just read the forum
don't worry dude....backup rom via mtk droid tool
den use my guide for port...nd for recovery check last post of @Traace
http://forum.xda-developers.com/android/development/guideport-cm-12-1-mtk6592-cm-12-1-t3142499
[email protected] said:
don't worry dude....backup rom via mtk droid tool
den use my guide for port...nd for recovery check last post of @Traace
http://forum.xda-developers.com/android/development/guideport-cm-12-1-mtk6592-cm-12-1-t3142499
Click to expand...
Click to collapse
When u plan to renew the tutorial? as it's still broken for us dg550 users
Current tutorial state is useless for us.
Traace said:
When u plan to renew the tutorial? as it's still broken for us dg550 users
Current tutorial state is useless for us.
Click to expand...
Click to collapse
can u share me info..what r u facing ??....though it's working grt for other devices....i'll share another guide
[email protected] said:
can u share me info..what r u facing ??....though it's working grt for other devices....i'll share another guide
Click to expand...
Click to collapse
Wonderful, thx.
Well it ain't boot(didnt pass vendor bootloader logo) on our Devices Doogee DG550. More than me already tried
Port from mt6582 to mt6592 works fine on first run
Yeah, it doesn't work at all. It was working on previous updates. They changed /data to 3GB that could be the problem, isn't it? I was working on flashable rom but it didn't boot. Even I use files from backup in TWRP, it must be problem with META-INF files.
Yeah other recoveries may work, but TWRP is best now like CWM few years ago. I can't even port 2.8.1 with that MTK tool on the newest rom from Blackview.
Also do you know about more complex tool for root checker? I have still problem I was using Super Su 2.46 but can't install busybox, so I used KingoUser and it was working but sometimes it stop working and I have to update Su binaries manually. BTW I don't like KingoUser, the Super Su is much better but doesn't work as it should on this rom. On my P4 5.1.1 working just fine.
my data is 8gb// ebr1 ebr2 .
what u mean, that previous version of cm12 kingzone worked on dg550?
The update script itself works fine with philz
For busybox i used "smartinstall" on Dark L Rom with dg550"
Traace said:
Wonderful, thx.
Well it ain't boot(didnt pass vendor bootloader logo) on our Devices Doogee DG550. More than me already tried
Port from mt6582 to mt6592 works fine on first run
Click to expand...
Click to collapse
ahh......seems like storage ,surfaceflinger issue .................may be extras too.........if u able to take logcat.....it help me lot to tell u exactly what's happening
[email protected] said:
ahh......seems like storage ,surfaceflinger issue .................may be extras too.........if u able to take logcat.....it help me lot to tell u exactly what's happening
Click to expand...
Click to collapse
Sorry adb doesn't work, hang on vendor.
- waiting for device..
Could u do me a favor and check if my ramdisk is different from other mtk's?
Here is a link from both ramdisks only: http://d-h.st/1VOT
Proper drivers are in place
untouched ramdisk hang on vendor logo nothing happens, if i edit mail node in ueventd.rc(Line 152, thx to @chanaka89 ) the device reboots after a while. Never pass logo
thx for ur help
Hi, I want to know if there is any ROM or possibilities for a development?
Possible Yes if there is any development going on at the moment no idea!
I know there is development for the s7 edge version
No. Not possible.
Sources not open. Ever wondered why there is no AOSP? Same reason
maitrot said:
No. Not possible.
Sources not open. Ever wondered why there is no AOSP? Same reason
Click to expand...
Click to collapse
Not true... Sources are here : https://github.com/MiCode/patchrom
Need 6.0.1 ROM to be patched. The S6 has a very good working MIUI 8 since a little time.
Samsung officiel 6.0.1 of S7 can be patched and get working MIUI but we need dev.
AOSP is not exactly the same. We need sources from Samsung but for MIUI just patch Samsung ROM without needed sources.
I´m talking about S7 sytem sources. You need a system to build it on . and I don´t mean kernel sources.
If it was "just" patching, why don´t you try it?
Hello!
I wonder if there is a Android 7 (or even 8) ROM available for my Sony Xperia E3 D2203. It seems that the last "supported" ROM is Android 6
If there is any Android 7 ROM just let me know
Thanks
skaterpunk001 said:
Hello!
I wonder if there is a Android 7 (or even 8) ROM available for my Sony Xperia E3 D2203. It seems that the last "supported" ROM is Android 6
If there is any Android 7 ROM just let me know
Thanks
Click to expand...
Click to collapse
No
At Sony website there are already 7.0 binaries available, does it help?
skaterpunk001 said:
Hello!
I wonder if there is a Android 7 (or even 8) ROM available for my Sony Xperia E3 D2203. It seems that the last "supported" ROM is Android 6
If there is any Android 7 ROM just let me know
Thanks
Click to expand...
Click to collapse
I'm trying to compile Lineage OS 14.1 (android 7.1.2) for our phone with 3.4.0 kernel. If I get it, I am about to upload the rom here.
Most of the sources are in SonyLOS repository (if you want to experiment)
By the time, seems that system can be compiled succesfully but not the kernel, which gets built into boot.img but phone fails to start.
rmnhg said:
I'm trying to compile Lineage OS 14.1 (android 7.1.2) for our phone with 3.4.0 kernel. If I get it, I am about to upload the rom here.
Most of the sources are in SonyLOS repository (if you want to experiment)
By the time, seems that system can be compiled succesfully but not the kernel, which gets built into boot.img but phone fails to start.
Click to expand...
Click to collapse
Can you compile cm14.1 for d2212?
rmnhg said:
I'm trying to compile Lineage OS 14.1 (android 7.1.2) for our phone with 3.4.0 kernel. If I get it, I am about to upload the rom here.
Click to expand...
Click to collapse
Sounds promising. If you need help and if you have any guidance I could maybe support you. I'm also a software engineer but not an Android Kernel hacker. Maybe I can assist you if there are some good tutorials. Just let me know
Dhruv7508 said:
Can you compile cm14.1 for d2212?
Click to expand...
Click to collapse
Maybe but I'm not sure.
rmnhg said:
Maybe but I'm not sure.
Click to expand...
Click to collapse
Do you have d2212?
skaterpunk001 said:
Sounds promising. If you need help and if you have any guidance I could maybe support you. I'm also a software engineer but not an Android Kernel hacker. Maybe I can assist you if there are some good tutorials. Just let me know
Click to expand...
Click to collapse
Yes, I can make a LineageOS based guide, like this one but with flamingo's repos. In my free time I can do it.
---------- Post added at 18:54 ---------- Previous post was at 18:52 ----------
Dhruv7508 said:
Do you have d2212?
Click to expand...
Click to collapse
No, I've LTE version (D2203) but perhaps porting some patches from eagle (which has the same processor) I can make it work, but first I need to compile a working rom for D2203.
rmnhg said:
No, I've LTE version (D2203) but perhaps porting some patches from eagle (which has the same processor) I can make it work, but first I need to compile a working rom for D2203.
Click to expand...
Click to collapse
Best of luck, i hope soon you'll develop a ROM
I'm trying to compile Lineage OS 14.1 (android 7.1.2) for our phone with 3.4.0 kernel. If I get it, I am about to upload the ROM here.
Click to expand...
Click to collapse
Best of luck dude, I would be thankful if a ROM was developed soon..
can some of you guys help me with the test point of d2203
i hard bricked it and the only solution i might have is that!!
please/? or how to find the testpoint
I have a 2243, that works almost like 2203. It is a GSM with LTE. (I don't really know the difference between them ) If anyone want to use it as a laboratory, just tell me I already do this. I had flashed so may ROM's at my own risk.... One more won't make difference at all haha
I'm facing some problems with RAM (compilation stops at 40% becouse of the memory) so the rom may come later, when I can fix all the issues.
rmnhg said:
I'm facing some problems with RAM (compilation stops at 40% becouse of the memory) so the rom may come later, when I can fix all the issues.
Click to expand...
Click to collapse
Ok, No problem...
Any progress on this?
skaterpunk001 said:
Any progress on this?
Click to expand...
Click to collapse
Go here
@dhruv thanks for the link sadly the camera does not work, so it's a no-go for me. But thanks to all for providing custom roms for the Sony Xperia! You are awesome guys!
Hello we are currently working on camera and other thinks or project , we sorry this does not suit you but we do our best
Following the news of the Android Go release, I wondered if it would be possible for someone to port it to this old device:
https://www.xda-developers.com/android-go-news/
I think it would be awesome. Would it be possible or are we still missing something important?
The s2 plus community has died. I can do a port when it comes around, but without support i can't do anything.
A Bad Guy said:
This device has lack of support
See s dous 2 forum , the same chip device with this phone
8.0 : Yes
Miui 8 : Yes
This device is quite good , but real fact there is less real dev for this phone since ghsr
Click to expand...
Click to collapse
OT:
In that case, will porting a s duos 2 rom for s2+ work?
A Bad Guy said:
Maybe . My friend have tried to port s2 plus to s dous 2 and it works so i thought you can try
About 8.0 , I'm not sure . This dev didnt have an available oreo kernel that can booted oreo rom ( I saw @matteo0026 just managed to made it bootloop )
Click to expand...
Click to collapse
What about miui8? Will it worth a try?
Android oreo (8.0) of s dous 2 is highly unstable (just booted that's all) . Any way, it will be good, if someone could upstream kernel of s2+ (unfortunately no active expert developers fr s2+ , who could easily fix the rejects during upstreaming (or upgradeing))
A Bad Guy said:
This device has lack of support
See s dous 2 forum , the same chip device with this phone
8.0 : Yes
Miui 8 : Yes
This device is quite good , but real fact there is less real dev for this phone since ghsr
Click to expand...
Click to collapse
Just checked s dous 2 forum & I can say that u r 100% correct. They got really good developers & good support
They even fixed screenshot & recent thumbnail issues of nougat rom (which is also a common bug for s2+)
Hats off
Johnny TDN said:
The s2 plus community has died. I can do a port when it comes around, but without support i can't do anything.
Click to expand...
Click to collapse
I think andoid go sources are out
https://forum.xda-developers.com/2015-moto-g/development/rom-pixel-experience-edition-t3717869
Moto G has AOSP based android go (8.1) nw.
But we lack dev's & support. So andoid go may end up in our dreams
A Bad Guy said:
There is one dev still working , i think so
Click to expand...
Click to collapse
Yes true.
We can't force anyone to work on a rom. Its all up to them.
So lets hope for better
Also Upgradeing kernal to 3.4.xx or 3.10.xx from 3.0.101 is necessary for android go or miui 8.
If anyone of u guys have a knowledge or experinece about kernal porting (or kernal upgrade) , pls try to port a kernal (can take committs from s duos 2) to our device
A Bad Guy said:
No no no
I think you are wrong
3.0.101 is enough for both , but it will takes a lot of cherry pick commit to boot up oreo or go ( more than 100 commits i thought ) . 3.4 and 3.10 just make the way to oreo and go easier ( maybe less than 50 commits )
3.0.101 is also enough for miui 8 , but i think the way this phone dev's port it is completely WRONG , that's why it cant able to booted up
Click to expand...
Click to collapse
If u have enough knowledge about these stuff's (port &upgrade),why don't you try upgradeing or port
A Bad Guy said:
Be smart , I not good at cherry pick
About miui , i not sure it will have bugs fixed . Problem not caused by kernel , it is caused by libs
But if you wanna try , i give you suggest : unpack boot of both rom ( cm13 s2 plus , miui 8 trend plus ) replace zimage of cm 13 ( s2 plus ) with miui 8 ( trend plus ) , repack boot ( miui 8 ) , flash and let c if it will it boot .
Click to expand...
Click to collapse
I already tried miui8 porting. But end up in bootloop.
When I took logcat, I saw a error of something like "bradcom tv error" .
A Bad Guy said:
Replace lib android runtime.so , android server.so , media_jni.so
Works ?
Click to expand...
Click to collapse
I already tried that. Not working.
I think a expert porter / developer is required
I quit working on it due to so many rejects
A Bad Guy said:
Try to port from s3
Just edit boot
Let c will it booted
Click to expand...
Click to collapse
In-case of s3, many changes are needed (I am not a good developer ).
Since community is dead, there is no use in porting any rom to these device. Even if I try that, I will not get any support from s2+ community to fix the bugs. (I know that ever since I tried to fix screenshot bug of nougat rom. Only I got support from ghsr & satcom886)
Ribin Manuel said:
What about miui8? Will it worth a try?
Android oreo (8.0) of s dous 2 is highly unstable (just booted that's all) . Any way, it will be good, if someone could upstream kernel of s2+ (unfortunately no active expert developers fr s2+ , who could easily fix the rejects during upstreaming (or upgradeing))
Click to expand...
Click to collapse
i really liked the MIUI 7 but it's a old android version.
MIUI 8 is a great alternative
Hope
Ribin Manuel said:
In-case of s3, many changes are needed (I am not a good developer ).
Since community is dead, there is no use in porting any rom to these device. Even if I try that, I will not get any support from s2+ community to fix the bugs. (I know that ever since I tried to fix screenshot bug of nougat rom. Only I got support from ghsr & satcom886)
Click to expand...
Click to collapse
I hope the s2 community does't die completely, do you know where i can download the 3.4.xx kernel for the S2?
This Module enables RAW Capture on the Galaxy A20 and Galaxy A20e, and changes the camera Hardware Level from Limited to Full.
RAW Capture is required for most GCams to work.
For information about GCam, go to this thread.
Click to expand...
Click to collapse
How does it work?
It works by replacing the library located at /vendor/lib/libexynoscamera3.so with an edited one. For reverse engineering enthusiasts, here is the patch applied to the library.
Prerequisites
- Magisk v20.4 or newer
- Android 11 vendor and kernel (Not compatible with versions of the Eureka Kernel older than 9.0)
Installation
Install as a normal Magisk Module, through Magisk Manager or TWRP.
Troubleshooting
Camera doesn't work, shows Black Screen
Make sure you are using a compatible Android 11 kernel and vendor.
If this issue is happening after updating your firmware, please let me know.
Telegram
GitHub Repo
Download (Galaxy A20)
Download (Galaxy A20e)
great job, you should do one for the custom roms, i'm stuck on the samsung one cause this mod only works there, when i install in other roms the camera stops working
Arthurcfsousa said:
great job, you should do one for the custom roms, i'm stuck on the samsung one cause this mod only works there, when i install in other roms the camera stops working
Click to expand...
Click to collapse
In which ROMs have you tried it? It should work on any as long as they use an Android 11 vendor and kernel.
TBM 13 said:
In which ROMs have you tried it? It should work on any as long as they use an Android 11 vendor and kernel.
Click to expand...
Click to collapse
i tried on all android 11 custom roms really, lineageos dotos etc
Arthurcfsousa said:
i tried on all android 11 custom roms really, lineageos dotos etc
Click to expand...
Click to collapse
Did those ROMs ask you to flash a custom kernel/vendor? If that's the case i'd suggest to try in phhusson's AOSP GSI with stock Android R kernel and vendor.
I can't test it on my phone right now as i don't have enough free space to make a TWRP backup.
TBM 13 said:
Did those ROMs ask you to flash a custom kernel/vendor? If that's the case i'd suggest to try in phhusson's AOSP GSI with stock Android R kernel and vendor.
I can't test it on my phone right now as i don't have enough free space to make a TWRP backup.
Click to expand...
Click to collapse
I installed the GSI version of dotos and It worked! Thanks
After I flash and all of my phone's cameras is disappear. I'm using this rom
[ROM][12.0] DerpFest for Galaxy A20/A20e [OFFICIAL][a20/a20e]
This is a small project based on AOSP. We try to be a platform for beginners and support the Custom ROM community with our own unique contributions as well. This ROM exists thanks to inspiration of AOSiP, Thank you! #StayDerped /* Your warranty...
forum.xda-developers.com
ComefromVN said:
After I flash and all of my phone's cameras is disappear. I'm using this rom
[ROM][12.0] DerpFest for Galaxy A20/A20e [OFFICIAL][a20/a20e]
This is a small project based on AOSP. We try to be a platform for beginners and support the Custom ROM community with our own unique contributions as well. This ROM exists thanks to inspiration of AOSiP, Thank you! #StayDerped /* Your warranty...
forum.xda-developers.com
Click to expand...
Click to collapse
The kernel used by that ROM is using the camera drivers from Android Q, that's why it's not compatible with this module. You will have to use another kernel or build its kernel without this commit.
Edit: This module may work with the OneUI 3 variant of the Eureka Kernel, but you will most likely run into some issues. Feel free to try it and tell me if it worked or not.
Screenshots
Thread updated. Added module for the Galaxy A20e.
Version 2.1 of the module released, the biggest change is that there is no longer a need to change the Black Level in GCam settings, so GCams (or other camera apps) that don't have this option should now take photos without pink tint.
Full changes can be found here.
@TBM 13
Hi, i am a member of the Eureka Team. As you may know, we make AOSP ROMs too, but we were using Q camera blobs on our vendor, till now, and we are going to switch to R camera blobs.
I'm wondering if we can use this module's library for our team's roms, we will credit you correctly. On our posts and etc.
Royna said:
@TBM 13
Hi, i am a member of the Eureka Team. As you may know, we make AOSP ROMs too, but we were using Q camera blobs on our vendor, till now, and we are going to switch to R camera blobs.
I'm wondering if we can use this module's library for our team's roms, we will credit you correctly. On our posts and etc.
Click to expand...
Click to collapse
Sure, go ahead.
Some photos i took with Arnova's GCam 8.1, using HDR+
no android 10 support ?
im willing to downgrade to get apps working from sd card
cimon666 said:
no android 10 support ?
im willing to downgrade to get apps working from sd card
Click to expand...
Click to collapse
If you use Android 10 with an 11 vendor it should work fine. I don't know if it's possible though, maybe with PHH's GSI.
Do you work on this model?
a20 205f
Do you work on this model?
If it works please give me the right way to do it
Elsayed111 said:
Do you work on this model?
If it works please give me the right way to do it
Click to expand...
Click to collapse
Yes, the module should work on any A20 and A20e model. Install it through Magisk.
TBM 13 said:
Yes, the module should work on any A20 and A20e model. Install it through Magisk.
Click to expand...
Click to collapse
Thanks man, it worked successfully