Hi, I have bricked my phone. Now it is recognized by computer as Qualcomm HS-USB QDLoader. I have read that it possible to make blankflash to gain ability to boot into fastboot, but it necessary to have some specific files... Is it possible now to return it back to life?
maybe service provider can help?
please i need your help to unbrick ma lg g stylo which bricked after i flash to downgrade it to lollipop. it dont turn on or show any sign of life. when connected to the pc is show Qualcomm HS-USB QDLoader 9008 in the device manager. help i really need you gus help. thanks.
Did you solve it?
Hi all,
I have a OnePlus One that's hardbricked (it doesn't show any forms of life).
I followed this guide, but I'm stuck. I installed QPST Drivers, and Qualcomm 2012 Drivers (although after installing this one, I get a message stating that the newest drivers are already installed.).
At the moment, my device is recognized in device manager as "Qualcomm HS-USB- QDLoader 9008 (COM10)" and sometimes it doesn't get recognized at all. The device manager will then say "unknown device".
When the device is recognized as "Qualcomm HS-USB- QDLoader 9008 (COM10)", it doesn't get recognized by the OnePlusRestoreTool (even if I run it in administrator mode).
I'm using Windows 7.
Could any of you perhaps help me find a solution?
Thanks in advance!
Robert
SITUATION:
hello , My phone is an asus x014d. recently I switched it off , and it just would not boot up again.
when i press the power on button it shows "powered by android" then the "asus" logo.
PROBLEMS:
- I CANNOT ENTER RECOVERY MODE (by doing the power on + vol up)
- I CANNOT ENTER TO FASTBOOT
- Device manager only identifies device as "qualcomm hs-usb diagnostics 9006" instead of "qualcomm hs-usb diagnostics 9008"
- when QFIL for unbricking it yields error "sahara fail"
- when using eMMC software Download the errors i get are "timeout waiting" , box dialog "cookie(if present) not received"
- managed to get into qualcomm hs-usb diagnostics 9008 mode but i can only manage to do that after getting to 9006 then flashing stock rom with RAW HDD TOOL then i am able to get into 9008.
TL;DR - DESCRIPTION (**NOOB ALERT**)
after research , i found out that my phone is bricked. i learnt that i have to get my phone identified by the computer through the "qualcomm usb drivers" then flash through "QFIL" a tool used for unbricking devices that have qualcomm processors.
i was able to successfully install the drivers , and plug my phone to the pc it shows that it is charging so i press the power plus volume up , then phone switches off and device manager never shows me the "qualcomm hs-usb diagnostics 9008" unless after switching off i immediately press volume down then device manager shows me "qualcomm hs-usb diagnostics 9006".
QPST will not flash the device if it is on "qualcomm hs-usb diagnostics 9006" so i learnt how to format the eMMC with raw HDD tool and whenever i formatted the eMMC with the stock rom , the pc would identify the device under PORTS > "qualcomm hs-usb diagnostics 9008"
when using QPST i am given the error "sahara fail" , and when using eMMC software downloader i get the error "cookie not received" and sometimes timeout.
i cannot attempt to get my phone to revive my phone (it sticks on a logo and when it is completely off and plugged in it shows a battery charging animation).
- any insight on how to solve this?
- Is it a Software issue that can be solved without the intervention of hardware? is my issue strictly a hardware issue? (e.g malfunctioning logic board)?
i am ready to provide images and files or any further clarification if needed.
any help or guide into this issue would be greatly appreciated thanks for investing time into helping me and others.
AdelTheConfused said:
SITUATION:
hello , My phone is an asus x014d. recently I switched it off , and it just would not boot up again.
when i press the power on button it shows "powered by android" then the "asus" logo.
PROBLEMS:
- I CANNOT ENTER RECOVERY MODE (by doing the power on + vol up)
- I CANNOT ENTER TO FASTBOOT
- Device manager only identifies device as "qualcomm hs-usb diagnostics 9006" instead of "qualcomm hs-usb diagnostics 9008"
- when QFIL for unbricking it yields error "sahara fail"
- when using eMMC software Download the errors i get are "timeout waiting" , box dialog "cookie(if present) not received"
- managed to get into qualcomm hs-usb diagnostics 9008 mode but i can only manage to do that after getting to 9006 then flashing stock rom with RAW HDD TOOL then i am able to get into 9008.
TL;DR - DESCRIPTION (**NOOB ALERT**)
after research , i found out that my phone is bricked. i learnt that i have to get my phone identified by the computer through the "qualcomm usb drivers" then flash through "QFIL" a tool used for unbricking devices that have qualcomm processors.
i was able to successfully install the drivers , and plug my phone to the pc it shows that it is charging so i press the power plus volume up , then phone switches off and device manager never shows me the "qualcomm hs-usb diagnostics 9008" unless after switching off i immediately press volume down then device manager shows me "qualcomm hs-usb diagnostics 9006".
QPST will not flash the device if it is on "qualcomm hs-usb diagnostics 9006" so i learnt how to format the eMMC with raw HDD tool and whenever i formatted the eMMC with the stock rom , the pc would identify the device under PORTS > "qualcomm hs-usb diagnostics 9008"
when using QPST i am given the error "sahara fail" , and when using eMMC software downloader i get the error "cookie not received" and sometimes timeout.
i cannot attempt to get my phone to revive my phone (it sticks on a logo and when it is completely off and plugged in it shows a battery charging animation).
- any insight on how to solve this?
- Is it a Software issue that can be solved without the intervention of hardware? is my issue strictly a hardware issue? (e.g malfunctioning logic board)?
i am ready to provide images and files or any further clarification if needed.
any help or guide into this issue would be greatly appreciated thanks for investing time into helping me and others.
Click to expand...
Click to collapse
Try with official ASUS drivers or, try to use the com port mounted on the back of the motherboard, maby.. i wouldnt suggest it to use to com port. it would require some hardware knowledge
So I flashed the wrong firmware into my LG K30 and now its hardbricked it doesnt go into any modes or turn on. With Qualcomm drivers my computer reads it as Qualcomm HS-USB QDLoader 9008 (COM8). No partitions are loaded when I plug in the phone.