Related
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Protection
Personally i prefer to have a screenprotecter on my device. I can recommend invisible shield. its very durable and will not be scratched. check it out on www.zagg.com
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
willyy1991 said:
Ok, i've had a problem with it, first i removed the protector that was as large as the device and made the screen very ugly, then i got the one from the box and putted it on, every air-bulb was gone when i kept rubbing etc.
1 stayed, under that bulb there was something white, i found out it was a 'piece' of dust.
It was kind of annoying so i removed the screen-protector, now when im trying to put it on i get lots of 'dust-bubbles',
Anyone has an idea of how to do it or should i just leave my diamond without the screen protector?
Click to expand...
Click to collapse
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
mhfalken said:
If you remove the protector, then there will alway be dust next time, because the dust get stuck to the protector glue. (I have also remove mine several times)
I have tried zagg, but I can't recommend it. It is a little sticky (which they also says on their homepage) and I don't like that. The floating feeling is gone. It is also not that invisible.
I have selected to buy a new original protector, and will use that.
The trick to get it on without bobbles is to start on the long edge and then slowly add it. (Keep the 'paper' on as long a possible).
(Michael
Click to expand...
Click to collapse
Where can you buy a new one, i need it really fast because my phone is without protection right now and no i am affraid of pressing it to hard to leave a permanent mark..
tnyynt said:
The original is washable. Wash it and dry it with a paper towel that sucks in the water bubbles, wipe dry and clean your screen and reapply it.
By the way, this goes to Accessories forum.
Click to expand...
Click to collapse
I did this and the dust keeps coming at the protector and my phone and there will be bubles because the dust gives it a 'height-problem'..
I bought invisible shield for mine, its pretty nice after say 4 days from install.
For first 2 days it might seem really bad but it gets much better.
I somehow scratched it without even noticing it, so I sent picture to zagg and they sent me new one. Even though scratch was very minor.
mhf
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Perhaps you could use isopropyl alcohol, usually it will remove glue without damaging the plastics surface (in that case: your display). DON'T USE nail polish remover, acetone or even benzine, it will remove the glue too - but your display would look "milky". You can get isopropyl alcohol at the pharmacy.
Tell us if that helped you
mhf said:
hi. this my first post on this web site
excuse me for my bad english
i have a diamond and i remove orginal screen protecter because i write sms with letter recorgnizer and the area that i write words on the screen become white and scratch. i remove orginal and buy a new one that for iphone. i cut it for my phone size and apply it. its sooo much stiky and i have a problem like orginal one.i wnat to remove it and when i do it a tiny layer of glue stand on my diamond screen. i can't clean it. and it give a bad scene to my diamond.
what's your idea. i give u a pichture from my diamond screen.
Click to expand...
Click to collapse
You might be interested in this thread: http://forum.xda-developers.com/showthread.php?t=421229
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
the exim screen protector is very good and smooth
I always use the Brando screenprotectors. See their online shop. They ship worldwide for only $ 3,00 shippingcosts.
It is very easy to install, easy to clean, 100% garanteed scratch free and very durable.
iixnullxii said:
I didn't get a screen protector with mine... I mean, I had a shipment protector with a little tab for peeling off, but nothing came with it for long term use. It's a Sprint, did they just not include one?
Click to expand...
Click to collapse
I've got a Sprint Diamond too, and didn't think I got a protector either, but it was in the separate bag that has the manuals. It should have come with one...Wish it woulda come with an extra one too, oh well.
I had the same problem with misalignment and dust bubbles with the HTC protector on my first few tries...i did however fix the problem...
Take the protector off and clean off the phone...use a microfiber cloth to get all the dust and oil off...after its super clean...take the protector and wash it off with some mild soap...rub the soap in with your fingers and get it clean. Be sure to note which side is down. After its clean, hold it around the edges and let the water bead off...i blew on the protector to get residual water off...some water is ok...actually helps with the install...the basically carefully apply it still holding the sides making sure not to leave finger prints. Start from the top and work your way down... i used a credit card pushed against the microfiber cloth to squeegie the protector down...be carefull with the few drops of water. After you have it down...there might be little bubbles or what looks like water spots where water is trapped under the screen...dont worry...just use your phone and leave it alone. Once it heats up from the excessive phone use it will start to dry up and the protector will come out very nice and smooth. Mine is flawless and i did the wash with soap apply and remove at least 3 or 4 times to get it right...Just be patient
I use screen protector from martinfields, what do you say about, anyone have one??
I think the best in market
My HTC one got a nasty scratch in it last week, so I ordered a Martin Fields.
It arrived this morning and I've got it on without any problems. So far I've noticed:
- It's not a perfect fit like the HTC one was. The hole for the speaker at the top is larger than the hole in the phone. It's not bad though.
- The visibility of the screen does seem better than the HTC protector, but I don't know if it's just the placebo effect of having a more expensive protector.
- It was _easy_ to put on, no bubbles at all
- The protector for the bottom buttons is awful. The circle is just the right size to completely hinder using the touch wheel and it's obvious that you've got a piece of plastic on there.
- It seems smoother than the original HTC one when using the stylus.
So far I'm impressed with it. I didn't bother with the camera hole or bottom hard buttons. The in box HTC one was fine for me, but when I got a scratch on it (my stylus somehow developed a sharp edge), it annoyed me.
I'm using the one supplied as standard with a uk CompactIV and it's great- you can hardly tell it's thereand the sensitivity seems fine.
I have 24 diamond screen protectors. Because i bought 24 diamonds and sold them all without screen protectors so i am sorted untill i buy another phone.
After using the martin fields one for a couple of days, I think it's great.
The screen looks much brighter and clearer through it (I thought the HTC one was great, but I do notice the difference). Plus the smoothness is brilliant, theres pretty much no friction for the stylus or fingers
where can i purchase the htc screen protector? the original that comes in the box...
Just thought I would warn others that after only a week of owning my cool TP I noticed a scratch on the screen and button area. A very straight score down the middle. Lucky I had my screen protector fitted else I would have been very upset.
Replaced the protector a week ago and today noticed a similar score down the screen though less deep. I then realised that this was due to a piece of grit in my pocket that had slipped between the case and the screen and scratched it as I pulled it out of the case.
I have now ordered a proper fully closed case to give full protection and hope this is a warning to others!
Definitely invest in a screen protector, they don't spoil the look of the device or impede it's usability in any way, they are easy to apply and could save you a lot of tears! Then use a decent case!
am using martin fields protectors.... it is tough enough that when i dropped my phone on the stairs, the rest of the body is scratched except the screen area and hkey areas where it is protected.
i frequently use my fingernails too. i don't trust other screen protectors... used it for my previous Axim v51 and X500 ... device gave out before the protectors.. meh.
alpha01 said:
am using martin fields protectors.... it is tough enough that when i dropped my phone on the stairs, the rest of the body is scratched except the screen area and hkey areas where it is protected.
i frequently use my fingernails too. i don't trust other screen protectors... used it for my previous Axim v51 and X500 ... device gave out before the protectors.. meh.
Click to expand...
Click to collapse
Yes I was definitely satisfied with the Martin Fields solution, which I've reviewed on my Diamond. Will order one for my new TP as well.
The review is in Hebrew and was published here (with some photos)..
http://www.pocketpcfreak.com/archive/00007709.htm
=====
Saar
I saw someone scratch the screen protector on their Touch Pro right in front of me, he had just put the screen protector on it and put it into his case, it was one of those that holds it right on your hip... Took it back out, exactly what you're talking about, a nice line right across the screen.
If using the case provided, the ribbon inside is attached so that you can insert the phone from both ends. If you feel inside, one side will be folded over and therefore sticks out quite abit which feels quite abraisive, whilst the other side of the case is much smoother because the ribbon is not folded. Inserting the phone from the other side, reverses which side sticks out more. I ensure that the screen side is always slid in with the smooth side facing the screen. So far, this has been ok.......................
I have just got hold of the HTC Touch Standard belt pouch (PN: PO S322) and it fits perfectly with a standard belt clip.
Velcro so the Sliding magnetic keyboard sensor does not go T^Ts up!!
anyone know where i can get extra protectors for my tp?
Personally, I always keep my TP in my pocket, without a case. The only time I ever use a case is if I'm putting the phone into a bag or box with other gear which might scratch it. Also, I never put keys etc into the same pocket as the TP, only a handkerchief. I've kept phones this way for many years and never got a single scratch on my screen. The inside of your pocket is generally a nice soft place for your phone. Case not necessary! In fact, all the case does is muffle the speaker and make it harder for you to hear the phone ringing.
In fact, until I got my TP I never even used screen protectors. The only reason I'm using one now is because it came in the box!
auriken said:
anyone know where i can get extra protectors for my tp?
Click to expand...
Click to collapse
Where are you based?
ardsar said:
If using the case provided, the ribbon inside is attached so that you can insert the phone from both ends. If you feel inside, one side will be folded over and therefore sticks out quite abit which feels quite abraisive, whilst the other side of the case is much smoother because the ribbon is not folded. Inserting the phone from the other side, reverses which side sticks out more. I ensure that the screen side is always slid in with the smooth side facing the screen. So far, this has been ok.......................
Click to expand...
Click to collapse
I haven't noticed the difference in the sides. I have been using this case for about a month and haven't seen any signs of scratching to the screen (although I have a screen protector on) or any other part.
auriken said:
anyone know where i can get extra protectors for my tp?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=428279
ardsar said:
If using the case provided, the ribbon inside is attached so that you can insert the phone from both ends. If you feel inside, one side will be folded over and therefore sticks out quite abit which feels quite abraisive, whilst the other side of the case is much smoother because the ribbon is not folded. Inserting the phone from the other side, reverses which side sticks out more. I ensure that the screen side is always slid in with the smooth side facing the screen. So far, this has been ok.......................
Click to expand...
Click to collapse
I agree with you. I always feel where the smooth side is and make sure that its the one facing the screen when I'm sliding my TP inside the leather case. So far I never had any scratches on mine.
I have noticed a small cut in my plastic (I haven´t taken of the large piece of plastic that came on then phone). From the middle of the screen and down to the edge.
I don´t get it! That folded ribbon ain´t sharp, it´s just wide, how the heck can it leave a cut like a scalpel? The other smooth side has a sharp thing in the seam, that could possibly cut but I really don´t think so.
I´m scared now, because there is a cut but nothing in the pouch can cut!
I just ordered one of these and recived it today.
Top pouch tbh
ebay
Item number: 270278860452
Mr.Sir said:
I have noticed a small cut in my plastic (I haven´t taken of the large piece of plastic that came on then phone). From the middle of the screen and down to the edge.
I don´t get it! That folded ribbon ain´t sharp, it´s just wide, how the heck can it leave a cut like a scalpel? The other smooth side has a sharp thing in the seam, that could possibly cut but I really don´t think so.
I´m scared now, because there is a cut but nothing in the pouch can cut!
Click to expand...
Click to collapse
Exactly!! Same happened to me. A very straight deep cut, saved only by the screen protector. I could only assume that a piece of grit got trapped between the sleeve and the phone. This wouldn't happen in an ordinary case, the pouch fits very tightly against the screen and this is where the danger lies. I have stopped using it.
Hey guys ive been looking for a different housing for my infuse, i love the white galaxy s 2 but i dont think ill fit on my phone even though they look the same the speaker grill is on the right side. Any suggestions?
52 views and no replies omg lol. Ive seen the stock housing but i want the white one so i can rock the phone without a case.
antrax360 said:
52 views and no replies omg lol. Ive seen the stock housing but i want the white one so i can rock the phone without a case.
Click to expand...
Click to collapse
Lol well how bout I change that-
Try this: http://www.colorware.com/default.aspx
It's not free and you would have to send you phone in, but I know they can paint (i'm not even sure its paint, it might be some type of dye or film) iphones and blackberrys.
That or you could go ghetto and buy sand paper and a rattle can of white and go to town!
lmao 250 no way lol. thats a new phone right there
antrax360 said:
lmao 250 no way lol. thats a new phone right there
Click to expand...
Click to collapse
Never said it would be cheap, get a white case...
xIC-MACIx said:
Never said it would be cheap, get a white case...
Click to expand...
Click to collapse
yeah that would be my best option.
Cases are so cheap that I would just go with that as well
phone is really rather easy to take apart just 8-9 screws and then a guitar pick to pop the screen out...Is there an aftermarket replacement full housing or just cases
also fell in love with the white S II. gonna try a white vinyl skin and will post results.
eghoti1 said:
also fell in love with the white S II. gonna try a white vinyl skin and will post results.
Click to expand...
Click to collapse
would really love to see the turn out!!!
look up hydrographic dips, I have done a few guns and some other things. Works very well.
Ok so here is what I ended up doing. I basically did only a white front skin. Since I didn't want to cover the back battery cover white, I purchased a frosted TPU case to kind of keep everything light colored. The back still showed too much black to make it convincing, but overall it turned out really nice IMO with a white case. I highly recommend doing this if you're craving a white SGS variant without the $500+ pricetag. The skin is good quality and I laid it on top of a new screen protector, and then put on the case. The skin has a back bottom piece & back battery cover piece that I didn't use. Overall, this makes the front of the Infuse look like a White SGS II clone (minus different soft key layout). See pics and purchase info below:
White Infuse Skin:
http://www.ebay.com/itm/300567071501?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
Clear/Frosted Tint TPU Case (light frost, the front looks more clear than frost):
http://www.amazon.com/TINTED-Design..._20?s=wireless&ie=UTF8&qid=1320885240&sr=1-20
Black/Smoke TPU Case (this is the case I had before I went white, I highly recommend it):
http://www.ebay.com/itm/330626579027?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
That looks amazing and will be the road I take, just curious if the back texture would make the vinyl bubble over time?
Sent from my SAMSUNG-SGH-I997 using xda premium
the texture of the vinyl or the battery back cover? The vinyl is relatively thick and sturdy. The front was flimsy only because the sides aren't supported with an inside until you apply it, but the skin material itself is pretty durable. I took it off and reapplied 3 times. There are a couple of very small bubbles that are only visible in certain light. I applied this overtop my screen protector so the results may vary with a direct application.
I chose not to apply any skin on the back of the phone. It still showed too much black IMO and didnt cover enough area around the sides to look like a full white phone from the back. So I do not know if a vinyl applied to the back battery cover will bubble. I actually like the OEM back design so I was going to leave it anyway. I opted for that frosted case which I think blends nicely with the front skin. For $13 total, I think it's worth the mod.
im actually in the process of figuring out how to pop this baby open. last night i had thsi wild dream where i spray painted it white!
now if the housing is just plastic, then i could easily unscrew the back. spray paint white with a glossy finish. then get the white screen sking you got there. its looks beast in white by the way. i was thinking going with all black. but the white just did it for me.
im gonna head over to walmart in a bit to check these things out. ill report on what i find.
---------- Post added at 04:04 PM ---------- Previous post was at 03:19 PM ----------
okay so i got back from walmart.
so this i believe is going to be my set up.
for the back. im going to spray paint it white then apply a glossy finish to it.
and for the front a white skin.
im down to do it. then im not down to do. lol.
I am not confident enough to try and spray paint the back white, but if you are then that would be ideal I think. I wish the back was white, then the effect would be more permenant but I am pretty thrilled with the way the front skin came out looking so convincing. I'm think that the only way to make it look convincing on the back to to really color the entire housing. I would be curious to see how yours comes out if you get the courage. Unfortunately, the phone's curved sides cause any skin to leave too much black space that makes it look tacky on the back.
I'm gonna do it! I think... shouldn't be hard just time consuming.
Sent from Optimus-Prime's Samsung Infuse 4G
Optimus-Prime said:
I'm gonna do it! I think... shouldn't be hard just time consuming.
Sent from Optimus-Prime's Samsung Infuse 4G
Click to expand...
Click to collapse
Hey Optimus, I've actually done a lot of custom painting to various things on my truck exterior and interior, and my old iPhone, if you really wanted to paint your phone, you've got a couple options to make it turn out correctly:
Option 1, you could start by googling "plasti-dip", its basically a reversible rubber coating that you can apply without any prep work. Now I have a can in black from home depot but, I wanna say you can get it in white or other colors online, its like 6-8 bucks for a rattle can of it. EDIT: found a LINK This would be the easiest and way less time consuming. (On my truck forums, people have sprayed their rims and its apparently pretty durable)
Option 2, if you wanted to go the normal rattle can route, I would seriously advice on getting some 1500 or 2000 grit sand paper to prep sand the phone before you paint. It's a real fine grit and doesn't take much, really helps the paint stick. After a couple coats of white, I would spray some clear coat too. (Make sure you clean the housing before moving to painting)
Also another thing I had issues with on my truck interior was the textured plastic like the back plate on our phones. To do it correctly people had to sand the texture off till it was smooth, then paint. So IMO just leave the plate alone and keep the gray color and save your self from a headache of white paint chips after normal use lol (might be a nice contrast from the white anyways )
Hope this helps brah
i looked into the "plasti-dip" but i don't want it to peel, and for sure considering the fact that its going to be around the edges of the phone its gonna peel. so spary painting it is my other option. also i don't want to give the phone thickness just a make over. haha. i worried about the back plate being a *****... and i was right... lol. well i can always order a new one off amazon.but what im aiming at is this:
is it all fails completely. ill just spray paint it black. haha.
Optimus-Prime said:
i looked into the "plasti-dip" but i don't want it to peel, and for sure considering the fact that its going to be around the edges of the phone its gonna peel. so spary painting it is my other option. also i don't want to give the phone thickness just a make over. haha. i worried about the back plate being a *****... and i was right... lol. well i can always order a new one off amazon.but what im aiming at is this:
is it all fails completely. ill just spray paint it black. haha.
Click to expand...
Click to collapse
Ya the corners would deff be the first thing to peel, but I "plasti-dipped" my iPhone a long time ago and it actually held up really well, the only reason it started peeling was because I dropped it on concrete. But honestly for 6 bucks, its worth a shot, if you don't like it you can peel it off like a stretchy sticker lol Actually, you could do this to the back plate and spray paint the actual housing white, just a thought.
And ya your best bet with the back plate is sanding it down till it's smooth and the painting it should be easy cheesy, the sanding part is the ***** lol Leaving it textured would be a mess...
As with basically all my other cellphones I convinced myself that I would not drop my Desire S on the road or other killer surfaces, so now that this has happened like 3 times at least, I am left with a few pretty nasty scratches on the aluminium body at the back. Besides dents and scratches not looking all too nice on their own, in this phone's case it looks even worse because it reveals the silver aluminium colour under the paint.
So does anybody know of a way to somehow kinda cover up these aluminium rends ?
meteish said:
As with basically all my other cellphones I convinced myself that I would not drop my Desire S on the road or other killer surfaces, so now that this has happened like 3 times at least, I am left with a few pretty nasty scratches on the aluminium body at the back. Besides dents and scratches not looking all too nice on their own, in this phone's case it looks even worse because it reveals the silver aluminium colour under the paint.
So does anybody know of a way to somehow kinda cover up these aluminium rends ?
Click to expand...
Click to collapse
put in a case, hide it in your pocket or go for the other extreme and scratch all the remaining paint off!
black edding. it works
TatoValverde said:
black edding. it works
Click to expand...
Click to collapse
Do you mean the Edding paint marker?
I have a grey Desire S which I dropped on a tile floor (ouch), left side first. Now it has two 1mm white dots where the metal paint chipped off, so I was looking for a silver permanent marker to maybe cover the white dots.
Have you tried the Edding marker? Does it wear off by taking the phone in and out of the pocket all the time?
If you've used this marker I'm looking forward to your feedback.
Thanks!
I have some lovely scratches and dents on mine. Somehow managed to take off a 1cm patch on the back under the logo; it's not too pretty. Even one of the dents is painful to touch as it is so sharp.
I'm afraid permanent marker will only make worse the current situation of my handset! In the case it goes and stays until it's needed!
Just put it in a case and convince yourself it never happened
Inginerul said:
Do you mean the Edding paint marker?
I have a grey Desire S which I dropped on a tile floor (ouch), left side first. Now it has two 1mm white dots where the metal paint chipped off, so I was looking for a silver permanent marker to maybe cover the white dots.
Have you tried the Edding marker? Does it wear off by taking the phone in and out of the pocket all the time?
If you've used this marker I'm looking forward to your feedback.
Thanks!
Click to expand...
Click to collapse
Sorry, I have a Black Desire S, and yeah, Edding marker works. Just try to find the smallest you can, since the marker on top of the original paint will be noticeable under sunlight. try to stick to the white dots, and good luck!
lol whats the chances of finding this thread, i've always kept mine in a rubber case to try an prevent chips etc, but i removed it the other day to flash another rom and noticed the dust/dirt that had got into the case had made a right mess on the back, so i htought what could i do to fix it,, i chose to just put it back in the case an forget about it but im defo gonna try the black paint pen,, thanks man
meteish said:
As with basically all my other cellphones I convinced myself that I would not drop my Desire S on the road or other killer surfaces, so now that this has happened like 3 times at least, I am left with a few pretty nasty scratches on the aluminium body at the back. Besides dents and scratches not looking all too nice on their own, in this phone's case it looks even worse because it reveals the silver aluminium colour under the paint.
So does anybody know of a way to somehow kinda cover up these aluminium rends ?
Click to expand...
Click to collapse
Perhaps an oil based enamel paint... you may be able to get a small tin from a hobby shop.
Metal paint
Guys, please allow me to brag about how I fixed the two tiny paint chips on my Desire S. :laugh:
As suggested by TatoValverde, at first I wanted to buy a paint marker, but since I have the gray Desire S this became a bit complicated. It turns out paint markers are not really easy to find (in Romania at least), much less if they're silver/gray and it becomes almost impossible to find a gray paint marker with a 0,8 mm tip.
After searching for 2 weeks I gave up the paint marker idea, went to the closest DIY store and bought a 750ml paint can + one thin brush. DIY stores are great because you can find a lot of colors and different shades. And by the way, a paint can costs about as much as a thin paint marker.
Although I tried to pick the closest shade of gray, even the smallest paint dot is noticeable on the phone so I had to put just a tiny amount, let it dry for some minutes, then very gently wipe off some of the excess paint. Then apply again a tiny bit of paint and wipe the whole area, over and over again until I couldn't really notice with the naked eye where the initial chips were.
The good thing is this paint seems to be pretty durable (as I've noticed when trying to clean some stains.. ) and it's water and UV resistant.
Hey everybody, got a new case review. This one is the infamous Nillkin Fresh, which is Nillkin's second generation of flip covers. To be honest, I got this case because it works with the iloome ScreenMate tempered glass protector I got, which didn't work with any of my other cases.
I got the yellow color, and it looks very nice. The flip has a darker yellow than the snap on part, which looks perfectly fine to me. The flip doesn't stay down for the first few days, and it doesn't have a lock mechanism. But, with a few days use, the flap does stay down on itself. Now, at first it wasn't working with my tempered glass protector, so I just kept stretching the fake leather out, and eventually it stays. I just clamped it so it stayed stretched. This is a very simple case, and if you don't drop your phone a lot (like me) this is a really nice case, it has a soft lining on the inside of the flip, almost like micro-fiber, and it helps keep fingerprints away. I do like this case, but it's not perfect. You can also use it as a stand, just fold it back and slide it into the slot. I absolutely HATE this feature, as the slot sticks out from the back of the case, so I can't use it with the Orb Charger. I forgot to take pictures of it, but it is REALLY annoying. Overall, aside from that one thing, it's a really nice case. :laugh:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
jiayit said:
Just to add on to OP, mine's the light blue one, a really sweet colour.
Has a microfiber (or whatever you call that) lining, prevents the screen from getting scratched.
The thickness. When paired with apps like Proximity AutoLock. you simply flip the cover and BAM, the phone locks itself. (Disclaimer: The app takes up quite a lot of battery though.)
Thickness again.
Thickness compared to a bumper. (if you haven't realized yet, I like blue )
The back plastic has got this pearly, glittery effect, too subtle to notice unless you're staring at it.
The front is a leathery kind of texture. Not real leather, of course.
It does destroy the edge swiping experience, with the exception the left hand side center (shown in the pic). May cause full screen SPs to bubble up too, but I have no idea, I don't use full screen ones.
How it looks. Mine has yet to become seasoned, so it'll topple if I don't support it. It has a hook that'll hook the front cover.
The headphone jack.
Those with a dbrand skin might want to take note, it kinda leaves a mark on the skin, but if you don't use the case for long enough, the mark'll go away.
I'd recommend it 8/10 overall as it makes it hard to use the phone using your left hand with the front flap, also, it makes my phone feel like a tank. But the front protection is great if you're not using a screen protector. But be careful of oil stains, they're almost impossible to remove from the inner lining. Washed it once, dried it and it feels like new again.
Edit, does anybody know how the hell do I resize the pictures? They're HUGE.
Click to expand...
Click to collapse
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
N4ever said:
You could just use a photo editor and re-crop?
Sent by a giant douche
Click to expand...
Click to collapse
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
N4ever said:
You could just use a photo editor and re-crop?
Sent from my Nexus 4, the only phone approved by Patrick Star
Click to expand...
Click to collapse
You could have said that without quoting the images all over again....
I have this case too, just never got around to finish writing my review. Mine is mint green (though some product pictures may appear turquoise).
Having a front cover in addition to the case is definitely nice, as I can drop it into my bag without worrying about what is going to hit against the front screen. Also very handy when talking on the phone with the flap covering the screen.
It's not slim as a ringke slim but not thick either, and the phone looks nice in it. I liked that it didn't have an actual lock to keep the cover on because it was easier to flip open.
It's so annoying when your holding it open. No comfortable way to do it.
Sent from my Nexus 4, the only phone approved by Patrick Star
Are the buttons easy to press?
Sent from my Nexus 4 using Tapatalk 4 Beta
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
jiayit said:
Tbh it's quite hard. And trying to take a screenshot with both buttons is a nightmare. But I don't take that many screenshots anyway and the power button is not really that hard to press, it's just that their opening hole for the power button is a tad too small.
Click to expand...
Click to collapse
I can see the volume rocker is exposed when you open the case. The power button looks a bit hard. In my current case(looks like the ringke slim) i had to cut off the bar at the top to gain easy access to power button.
Sent from my Nexus 4 using Tapatalk 4 Beta
The way everything folds is just uncomfortable.
Sent from my Nexus 4, the only phone approved by Patrick Star
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Fabriciohss said:
I got this case last week, black one. The plastic base is super cheap, there are at least two defects and the frame around the power button is simply bent. Although my flip cover actually rests perfectly on the screen, the plastic part makes noises everytime a little pressure is applied to the sides.
Went straight to the litter bin, I'd rather use my phone naked than inside this thing.
Just my two cents.
Click to expand...
Click to collapse
Seems like you got a manufacturing defect.. Why didn't you ask for a refund?
Hung0702 said:
While we're doling out advice, I recommend that you change the text you quote so everyone doesn't have a second column of gigantic images...
Click to expand...
Click to collapse
Sent by a bigger douche who calls people out
Sent by an even bigger douche
Sent from my Nexus 4, the only phone approved by Patrick Star