Enough with the alliteration,
I've recently come to own 3 clear soft TPU cases and thought I'd compare them here for you all.
Spigen Liquid Crystal case
Choetech soft flexible case
Easy Acc TPU case
I'll start by saying the phone case market seems to be about as diverse as the phone market is right now. All 3 cases are almost exactly the same thickness, made of almost exactly the same material even down to the textured dots on the inside of the case to prevent bubbling. So rather than comparing everything I'll point out the differences.
First and foremost the Spigen is hands down the best for fitment, I would hazard a guess at the other two being from the same OEM despite the difference in branding and packaging as they both have the same minute misalignment on the fingerprint hole, and I mean minute, but it's enough to knock a perfectionist sick. The hole is wider on the latter two and the camera gap spans the whole way across for the camera and sensors whereas the spigen has a much tighter, satisfying fit around the fingerprint sensor and camera/sensors.
For protection the Choetech has more exaggerated corners in aide of protecting against drops to the corner and provides a little bit more lift when lying flat without affecting the grip of the device, only the aesthetics, the trade off being have to look at the corner bumps, the aforementioned gappage and that 0.1mm misalignment.
So... I paid £8 for the Spigen, £6 for the EasyAcc and 45p for the Choetech (They sent me a test unit normal price is £10)
The Spigen is definitely worth £2 more over the Easy Acc, armed with this knowledge I wouldn't then be happy paying another £2 more for the protective bumps UNLESS the quality of the rest of the case matched the Spigen.
Take forth this knowledge, look at the prices at your retailers and decide for yourselves!
Spigen - EasyAcc - Choetech
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hoodeddeathman said:
Enough with the alliteration,
I've recently come to own 3 clear soft TPU cases and thought I'd compare them here for you all.
Spigen Liquid Crystal case
Choetech soft flexible case
Easy Acc TPU case
I'll start by saying the phone case market seems to be about as diverse as the phone market is right now. All 3 cases are almost exactly the same thickness, made of almost exactly the same material even down to the textured dots on the inside of the case to prevent bubbling. So rather than comparing everything I'll point out the differences.
First and foremost the Spigen is hands down the best for fitment, I would hazard a guess at the other two being from the same OEM despite the difference in branding and packaging as they both have the same minute misalignment on the fingerprint hole, and I mean minute, but it's enough to knock a perfectionist sick. The hole is wider on the latter two and the camera gap spans the whole way across for the camera and sensors whereas the spigen has a much tighter, satisfying fit around the fingerprint sensor and camera/sensors.
For protection the Choetech has more exaggerated corners in aide of protecting against drops to the corner and provides a little bit more lift when lying flat without affecting the grip of the device, only the aesthetics, the trade off being have to look at the corner bumps, the aforementioned gappage and that 0.1mm misalignment.
So... I paid £8 for the Spigen, £6 for the EasyAcc and 45p for the Choetech (They sent me a test unit normal price is £10)
The Spigen is definitely worth £2 more over the Easy Acc, armed with this knowledge I wouldn't then be happy paying another £2 more for the protective bumps UNLESS the quality of the rest of the case matched the Spigen.
Take forth this knowledge, look at the prices at your retailers and decide for yourselves!
Spigen - EasyAcc - Choetech
Click to expand...
Click to collapse
Which ones are which? I to am looking for a good clear case to show off the white and silver design. I was thinking of the spigen tough armor clear silver, but it covers most of the back. Maybe the Orzly fusions clear.
In the photo the choetech is the last to the right.
Im assuming the center is easyacc. I bought this under 5 different vendors with different specifications each, claming ultra thin slim, and they were exactly the same, down to the pacaking with slight vatiations and misalignments.
In the ended up paying $1-8 each. So taking that into consideration, the one from china for $1 shipped via epacket that arrived on the same day as others shipped from variius states in the US, is the better value.
In the case thread I posted over 15 vendors selling the same case with different logos and brand names
My issue with this thickness clear glossy tpu has always been if the cut outs for the camera are too close if rhe flash fires it will cause a glare in thr picture.
aknotts415 said:
Which ones are which? I to am looking for a good clear case to show off the white and silver design. I was thinking of the spigen tough armor clear silver, but it covers most of the back. Maybe the Orzly fusions clear.
Click to expand...
Click to collapse
The caption above shows the order
Spigen - Easy Acc - Choetech
All the spigen cases I've had have always been spot on to be fair and in this case it's the best clear TPU I've seen or used. I don't think they get any thinner.
I'm much more fond of the Google Live case I made after all anyway!
Hoodeddeathman said:
The caption above shows the order
Spigen - Easy Acc - Choetech
All the spigen cases I've had have always been spot on to be fair and in this case it's the best clear TPU I've seen or used. I don't think they get any thinner.
I'm much more fond of the Google Live case I made after all anyway!
Click to expand...
Click to collapse
If what you claim about all 3 being the same thickness. Then there are plenty tpu a lot thinner, I have a couple and have a few more on order.
The easyacc and choetech are standard thickness. Imho.
aknotts415 said:
Which ones are which? I to am looking for a good clear case to show off the white and silver design. I was thinking of the spigen tough armor clear silver, but it covers most of the back. Maybe the Orzly fusions clear.
Click to expand...
Click to collapse
I had the clear tough armor. Don't get. It is a nice quality case and it looks really cool on the pixel but I'm telling you it doesn't belong for the pixel. It makes the phone slippery with its matte plastic cover, it makes the pixel too thick and the bottom part of the phone where my pinky touches is pretty sharp. All these in combination makes for an unwieldy phone. Dropped it so many times trying to shuffle my pixel one handed to reach different spots of the screen. I returned it and am currently using a Spigen liquid crystal which is a completely different experience. Get the liquid crystal
Consider the Ringke Fusion
Spigen Ultra Hybrid is the best clear case I've ever owned. I can't recommend enough.
I think the Caseology clear waterfall case is the best out there. Much better than the Spigen.
Sent from my Pixel XL using Tapatalk
---------- Post added at 03:50 PM ---------- Previous post was at 03:49 PM ----------
teflonsean said:
I think the Caseology clear waterfall case is the best out there. Much better than the Spigen Ultra.
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Sent from my Pixel XL using Tapatalk
Casemate Naked Tough is always my clear case. The buttons are always awesome, and it gives great protection
Sent from my Pixel XL using Tapatalk
+1 for the Caseology waterfall case!
Sent from my Pixel using Tapatalk
I bought the VRS Design clear case with kickstand from eBay. I'll share some thoughts on it when it arrives.
http://www.ebay.com/itm/191992415077
Sent from my Pixel XL using Tapatalk
Related
Whats the thinnest case you have found for the S4? I've been looking at various cases, and they are all so thick ( I usually go naked.. ) but I would like to put something over it for drop protection ( so no, skins don't work ). And don't suggest any of the crap offered by SPIGEN, I'm done with that worthless company ( ALL support issues with them ).
ITSkins has the ghost and Zero.3, but neither is available STILL ( they where suppose to be on the 15th ) and you can't pre-order them either....
Everything else i find just says "Thin" or some other wonderful adj, I'd like a number and facts. Thin is subjective....
rkennison said:
Whats the thinnest case you have found for the S4? I've been looking at various cases, and they are all so thick ( I usually go naked.. ) but I would like to put something over it for drop protection ( so no, skins don't work ). And don't suggest any of the crap offered by SPIGEN, I'm done with that worthless company ( ALL support issues with them ).
ITSkins has the ghost and Zero.3, but neither is available STILL ( they where suppose to be on the 15th ) and you can't pre-order them either....
Everything else i find just says "Thin" or some other wonderful adj, I'd like a number and facts. Thin is subjective....
Click to expand...
Click to collapse
I have the case mate barely there case. I have to say, it feels so nice in the hand.. Because of the matt finish. Better than any other case I had. And I also had the spigen neo hybrid. The look is also casual. Really like the style.
Here some foto's I just took.
Hope it helps.
Regards
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Verstuurd van mijn GT-I9505 met Tapatalk
I have the ringke rearth slim and it looks similar to the barely there above but even thinner (by the looks of his pics). Not much protection but improves grip and barely any if at all bulking up of the phone
Sent from my SGH-M919 using xda premium
i have this tpu case that to me doesnt feel like it adds any weight or thickness to the phone itself. http://www.amazon.com/gp/product/B00BYPZU28/ref=oh_details_o01_s00_i00?ie=UTF8&psc=1
here are some pics to show you what i mean. notice 2 of these pics you can see how the case works well with the mime ghost glass screen protector. it's also partially see through.
found this on ebay
Clear 0.3mm Ultra Thin Cover Case Screen Guard for Samsung Galaxy S4 i9500
This 0.3 case covers the top and bottom edges too, this will be the thinnest you can find on the market with a full protection. I've one when i'm using my S3, looking for a S4 one and found this.:good:
Sent from gala,y s4
hollisterryann said:
Definitely neo hybrid by spigen. Thing adds Like no thickness
Sent from my SGH-M919 using xda app-developers app
Click to expand...
Click to collapse
I agree. It doesn't add anything thickness but HOWEVER, it does add some to the width making the phone feel wider.
He said no neo hybrid
rkennison said:
And don't suggest any of the crap offered by SPIGEN, I'm done with that worthless company ( ALL support issues with them ).
Click to expand...
Click to collapse
After everything I have read about Spigen, I am very hesitant to buy one of their products. The casemate looks pretty nice, but I don't like the openings on the top and bottom. I want a thin/light case, but I want a little bit of fall protection in it.
I've just got this one, loving it so far.
http://www.amazon.co.uk/gp/aw/d/B00BYMGQVU/ref=mp_s_a_1_2?qid=1369333383&sr=8-2&pi=SL75
Sent from my GT-I9505 using Tapatalk 2
Serious recommendation: I was in the same boat, and didn't think I would find anything I liked. I happened to be browsing at BestBuy while my wife picked out case. I noticed some RocketFish branded cases that look really slim. Asked if I could try one on my phone and it fit like a glove, barely added any size to it, but definitely makes it feel like I'm not going to accidentally fling the phone across the roam just taking it out of my pocket.
I also have the Ringke Rearth ultra slim case - which was not only the thinnest I've seen, but also very cheap!
I keep the Spigen Neo-Hybrid case on my phone though - I had an S3 get nicked up at the bottom where the ultra thin rearth case didn't cover. Outside of the neo-hybrid I think the rearth cases are my favorites - considering I bought one for my S4 immediately and had one for my S3 I'd feel confident suggesting it.
I purchased both the Ringke Rearth Slim and the Spigen Neo Hybrid. While the Spigen looks nice it really does add a lot of width to the phone. The Ringke is easily the slimmest case that I have used for any phone. Not to mention it only cost $2. The matte black has also been great for adding grip. My only complaint is that the Ringke case is very difficult to remove.
I have a Spigen Ultrafit. Its pretty darn thin.
I like the matte finish.
Spigen Ultrafit
Edit: it is just thick enough the effectively recess the buttons to protect them from drops, plus it works with a tempered glass screen protector. AND...its only $10 shipped with Prime.
what is the point of cases that dont cover the top and bottom? my dad's s3 has one of those and it got destroyed on the bottom from a small drop
RTbar said:
what is the point of cases that dont cover the top and bottom? my dad's s3 has one of those and it got destroyed on the bottom from a small drop
Click to expand...
Click to collapse
It would have to hit a very uneven surface...the corners are protected. You would have to drop in on gravel or a curb or something like a car door sill. If you drop in on tile or flat concrete it is impossible to hit the edge because of the gap created by the corners. I prefer minimal protection. My main concern is really protecting the corners back and front since those are what are going to hit 99% of the time. And the buttons...you can break the board connections (trust me I know, lol) if the phone lands on its buttons. I actually was thinking of going naked since the battery door can be replaced so easily and it is the entire back. Just a screen protector and a replaceable back. I have insurance. Also, I am a middle aged dad...I am not in the situations that you would drop a phone that often.
All that being said I will probably get another case at some point just because, lol.
I have the Body Glove phone case. Made of soft rubber for a nice all around grip. I purchased it at Walmart for $15. Link is for image of the case.
http://www.radioshack.com/product/i...gclid=CJD57O6KsrcCFRSN7AodYUMAAA&gclsrc=ds.ds
I had this case for my S3 and loved it......anyone know if there's a case just like this for the S4? I keep my phone in my pocket so I prefer the headphone jack and the charging port to be covered unless I'm using them.
theroyalwe said:
I also have the Ringke Rearth ultra slim case - which was not only the thinnest I've seen, but also very cheap!
I keep the Spigen Neo-Hybrid case on my phone though - I had an S3 get nicked up at the bottom where the ultra thin rearth case didn't cover. Outside of the neo-hybrid I think the rearth cases are my favorites - considering I bought one for my S4 immediately and had one for my S3 I'd feel confident suggesting it.
Click to expand...
Click to collapse
Supposedly the neo-hybrid makes the headphone jack extremely small though...I LOVE the look of that case, but as a Beats user, I'm afraid :crying:
DBA Cases has a thin case that is avaliable in six different colors.
sent from my 32gb + 32gb S4
Paradisimo said:
I purchased both the Ringke Rearth Slim and the Spigen Neo Hybrid. While the Spigen looks nice it really does add a lot of width to the phone. The Ringke is easily the slimmest case that I have used for any phone. Not to mention it only cost $2. The matte black has also been great for adding grip. My only complaint is that the Ringke case is very difficult to remove.
Click to expand...
Click to collapse
I have the Ringke. It is very thin. I don't feel like it would do anything to prevent the screen from cracking. It would prevent scratches to the back though.
I now have a Chinese knock off neo hybrid. Add with the genuine. .. Pretty thin on the back but it does make the phone wider. I do feel like this will help obsorb shock in a fall.
If I end up getting an S6, I'll probably want the slimmest case possible since I won't need uber-protection nor do I wish to add a lot more bulk.
These are the three I'm currently considering:
1) Obliq Ultra Slim Fit
http://www.amazon.com/Galaxy-Spigen...UTF8&qid=1426904642&sr=8-6&keywords=spigen+s6
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2) Spigen Galaxy Slim Fit
http://www.amazon.com/Galaxy-Spigen...UTF8&qid=1426904642&sr=8-6&keywords=spigen+s6
3) Ringke SLIM case
http://www.amazon.com/Galaxy-S6-Cas...e=UTF8&qid=1427082439&sr=8-2&keywords=slim+s6
And just an FYI - I bought a Ringke SLIM case for my Note 4 and what I noticed was that it leaves scratch marks when you try to remove it.
I now use my Note 4 naked, but for the S6 I don't think that's the way I'll go, especially with all that glass material and the phone itself being such a finger print magnet.
Let me know which slim cases you're considering and if there's others out there.
the slimmest would be the Spigen Ultra thin, http://www.amazon.com/dp/B00QU4N7AK/, which Spigen claims to be the "thinnest on the market"
tft said:
the slimmest would be the Spigen Ultra thin, http://www.amazon.com/dp/B00QU4N7AK/, which Spigen claims to be the "thinnest on the market"
Click to expand...
Click to collapse
I ordered that one yesterday
The last one looks pretty nice.
That's actually quite nice, but not sure if I'm a fan of the buttons. I like using the actual phone buttons.
I'm planing to purchase Ringke or Spigen cases but I'm not sure about their wireless charging capability. Any ideas?
whiskey_jd said:
I'm planing to purchase Ringke or Spigen cases but I'm not sure about their wireless charging capability. Any ideas?
Click to expand...
Click to collapse
in this case is where thin would be best. hard to say which will work and which won't but im pretty sure the one like i posted above (spigen) will work because it's fairly thin.
livinginavacuum said:
That's actually quite nice, but not sure if I'm a fan of the buttons. I like using the actual phone buttons.
Click to expand...
Click to collapse
i am the opposite. after having the Spigen Neo Hybrid on my S4/S5, it make pushing the buttons so much easier than having them recessed due to the case.
tft said:
i am the opposite. after having the Spigen Neo Hybrid on my S4/S5, it make pushing the buttons so much easier than having them recessed due to the case.
Click to expand...
Click to collapse
So, basically, what you're saying is that the "clickity click" feel when you press the button is still solid and pronounced?
May have to give it a try then...
the obliq slim case for this phone looks extremely nice. i'm probably going to pick that one up as it offers protection on top corners for the phone and fits snug all around it. just my opinion
Obliq went down to 9.99 on Amazon
Picked up that and spigen to test them out. Will return one of them
https://www.youtube.com/watch?v=xqWezjnJOZI
This one looks really slim! The Smoke-White version on a white Galaxy S6 looks amazing and also invisible! I just don't like the logo on the side, i wish they didn't put any logo on it... If i buy a 700€ phone, then i really don't need the logo of a 10$ case on it.
megaherts said:
I ordered that one yesterday
Click to expand...
Click to collapse
I purchased this one as well. I really can't tell from the picture, but do you think it has a lip to protect the front screen?
Ugh, all these cases have that nasty huge cutout for the camera and sensor. I've seen a couple that actually have two separate cutouts one for each but they're bulkier.
Any suggestions?
Sent from my Nexus 6 using XDA Free mobile app
Croathlete said:
I purchased this one as well. I really can't tell from the picture, but do you think it has a lip to protect the front screen?
Click to expand...
Click to collapse
yeah, it does wrap around the front a bit for protection.
ViciousDiarrhea said:
Ugh, all these cases have that nasty huge cutout for the camera and sensor. I've seen a couple that actually have two separate cutouts one for each but they're bulkier.
Any suggestions?
Click to expand...
Click to collapse
the Spigen Neo Hybrid is probably one of the best cases because it's fairly thin, has nice "clicky" buttons and offers all around protection without all the bulk. it has separate cutouts for camera and sensor.. plus it's nice as hell, especially the slate color, i ordered one and received it yesterday...
http://www.amazon.com/gp/product/B00QU4Q31A/
Spigen also makes just a bumper (Neo Hybrid EX) without a backing which is also pretty nice..
http://www.amazon.com/gp/product/B00T6P0FZK/
tft said:
yeah, it does wrap around the front a bit for protection.
the Spigen Neo Hybrid is probably one of the best cases because it's fairly thin, has nice "clicky" buttons and offers all around protection without all the bulk. it has separate cutouts for camera and sensor.. plus it's nice as hell, especially the slate color, i ordered one and received it yesterday...
http://www.amazon.com/gp/product/B00QU4Q31A/
Spigen also makes just a bumper (Neo Hybrid EX) without a backing which is also pretty nice..
http://www.amazon.com/gp/product/B00T6P0FZK/
Click to expand...
Click to collapse
I don't really understand the idea of bumpers. All of the size is still added both around the phone and in depth so there is no value not having the back
I ordered the rearth slims and the spigen ultra slim clear tpu one. Supposed to be here this coming week.
I've always been a fan of the rearth/ringke slims on all recent phones. They are the best compromise of decent protection and slimness imo. Looking forward yo trying out the super thin spigen clear tpu one too
jbdan said:
I ordered the rearth slims and the spigen ultra slim clear tpu one. Supposed to be here this coming week.
I've always been a fan of the rearth/ringke slims on all recent phones. They are the best compromise of decent protection and slimness imo. Looking forward yo trying out the super thin spigen clear tpu one too
Click to expand...
Click to collapse
same, i hate how spigen brands their cases so badly, makes them look ugly
km8j said:
I don't really understand the idea of bumpers. All of the size is still added both around the phone and in depth so there is no value not having the back
Click to expand...
Click to collapse
while that is kind of true, bumpers allows you to have some protection while still keeping the device fairely naked so you don't cover all that "fancy" glass back.
The spigen ultra slim looks and feels very nice on the phone. Sending the other clear cases I have back. They all came with a protective film you're supposed to slap on the back of the phone to protect it from the case itself. The spigen has this micro pattern embedded into the back of the case, it's hard to explain but it looks good and seems like whatever they put on the back of the case protects the glass on the back of the s6 from smudging up against the clear tpu
twoeleven99 said:
The spigen ultra slim looks and feels very nice on the phone. Sending the other clear cases I have back. They all came with a protective film you're supposed to slap on the back of the phone to protect it from the case itself. The spigen has this micro pattern embedded into the back of the case, it's hard to explain but it looks good and seems like whatever they put on the back of the case protects the glass on the back of the s6 from smudging up against the clear tpu
Click to expand...
Click to collapse
good to hear. this is why i tell everyone to just buy Spigen and save the hassle from buying a dozen different other cases to still not like them, buy once and be done, Spigen rarely ever disappoints and if you're not happy for whatever reason just contact them and they will take care of you.
I just ordered the Diztronic case from Amazon. Not set to be released until Nov 4, but since my phone isn't set to ship until the 23-25, it should be here in plenty of time.
So far this looks like like the best option to me.
I've used their cases for past nexus phones and they've always done well. Some movement a year in but overall thin and protect it without being bulky
Sent from my A0001 using Tapatalk
I tried several cases, this is definitely my favorite. Very grippy and the buttons are so easy to push.
Does this that a textured inside or the air pocket corners?
Sent from my Google Pixel XL using XDA Labs
I got mine last week. Great case as usual.
Best and most elegant phone case I've ever had. Now where's my full coverage screen protector?
I order this on Amazon last Saturday and got it Tuesday. It's a temporary case until something thinner comes out, but I agree it's the best option. It's a nice case, it's TOO bulking and very grippy (but not too much where I can't slide it in my pocket. Great fit and I recommend anyone who likes a thin case who is waiting for a CaliCase to get this in the mean time!
Josh
Mines super slick should of waited for pixlee one. Love the buttons on it though. But someone just said the parallax case is only .5mm thicker than the maxboost so I may get that instead.
I got this case as well. I really dislike the raised side lip it has, it makes it feel more bulky than I prefer. If it didn't have that raised side lip I would love this case.
Sent from my Pixel XL using Tapatalk
I've gone through the Sparin case from Amazon and three Google cases, the clear, the silicon and a Live case. The Diztronic blows them all away in terms of actual protection from a very minimal form factor. The Sparin is a nice case, especially for $10, but it feels pretty flimsy when compared to the Diztronic. I had a D case with my N6 and am not at all surprised that I've sifted through other cases to land back in D's corner. The only thing I would probably trade it for is a really nicely done leather case (looking at you, Bellroy).
https://www.amazon.com/Pixel-Diztronic-Slim-Fit-Flexible-Google/dp/B01M35YM2M
They just posted some new cases too.. Full Matte with popping colors;
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Pixelee also in awesome colors;
joshacct1986 said:
I order this on Amazon last Saturday and got it Tuesday. It's a temporary case until something thinner comes out, but I agree it's the best option. It's a nice case, it's TOO bulking and very grippy (but not too much where I can't slide it in my pocket. Great fit and I recommend anyone who likes a thin case who is waiting for a CaliCase to get this in the mean time!
Click to expand...
Click to collapse
The Diztronic is too bulky??? I don't see how you'd possibly get a thinner TPU case. It'd be so thin it'd be useless, or you're approaching sticker protection.
I have the Diztronic and the similar Spigen Armor (no plastic, just TPU) and the Spigen's sides are slightly thicker, presumably with their "air" protection, but otherwise the cases are very similar in feel. Spigen has more "design" to it, including the carbon spot (which I personally dislike) but otherwise both cases are very similar.
khaytsus said:
The Diztronic is too bulky??? I don't see how you'd possibly get a thinner TPU case. It'd be so thin it'd be useless, or you're approaching sticker protection.
I have the Diztronic and the similar Spigen Armor (no plastic, just TPU) and the Spigen's sides are slightly thicker, presumably with their "air" protection, but otherwise the cases are very similar in feel. Spigen has more "design" to it, including the carbon spot (which I personally dislike) but otherwise both cases are very similar.
Click to expand...
Click to collapse
Some people don't want a case at all but want to protect against bumps, scratches for example https://9to5toys.com/2014/10/29/thinnest-iphone-6-plus-cases-prevent-camera-wobble/
khaytsus said:
The Diztronic is too bulky??? I don't see how you'd possibly get a thinner TPU case. It'd be so thin it'd be useless, or you're approaching sticker protection.
I have the Diztronic and the similar Spigen Armor (no plastic, just TPU) and the Spigen's sides are slightly thicker, presumably with their "air" protection, but otherwise the cases are very similar in feel. Spigen has more "design" to it, including the carbon spot (which I personally dislike) but otherwise both cases are very similar.
Click to expand...
Click to collapse
I posted on another thread about wanting something that doesn't protect against impact, just scuffs to the sides and back. I want something similar to The Veil by Caudable that is ultra thin.
So is it too grippy or slick..I've seen both comments. Also do the matte and pixlee ones feel the same
I just received my diztronic case. As usual it is top quality. I used them on my Nexus 5X, and to be honest, for quality non hardshell cases that are out soon after phone releases...they really are worth the money.
edit responses:
Q.) So is it too grippy or slick..I've seen both comments. Also do the matte and pixlee ones feel the same
A.) Honestly...Its pretty well balanced. I personally like it a BIT more grippy, but my experience with diztronic cases, is that the longer you ahve them your hand wears down the matte a TINY bit(not enough to SEE) and it becomes perfectly grippy.
Q.) Does this that a textured inside or the air pocket corners?
A.) no.
Will edit this post with any other questions about the case.
Just received my black pixlee case and it's my first Diztronic case and I love it! It's so minimal and classy.
AllusionPDX said:
I just received my diztronic case. As usual it is top quality. I used them on my Nexus 5X, and to be honest, for quality non hardshell cases that are out soon after phone releases...they really are worth the money.
edit responses:
Q.) So is it too grippy or slick..I've seen both comments. Also do the matte and pixlee ones feel the same
A.) Honestly...Its pretty well balanced. I personally like it a BIT more grippy, but my experience with diztronic cases, is that the longer you ahve them your hand wears down the matte a TINY bit(not enough to SEE) and it becomes perfectly grippy.
Q.) Does this that a textured inside or the air pocket corners?
A.) no.
Will edit this post with any other questions about the case.
Click to expand...
Click to collapse
Smallsmx3 said:
Just received my black pixlee case and it's my first Diztronic case and I love it! It's so minimal and classy.
Click to expand...
Click to collapse
Let's get some pictures, I like to see what they look like.
clockcycle said:
Let's get some pictures, I like to see what they look like.
Click to expand...
Click to collapse
I do not have any way to take pictures of it on the phone, but I do have my Nexus 5x, which fits exactly the same. To the point that when I reach into my bag to grab one,i don't realize which one I am holding for a good amount of time.
My favorite feature about them is the buttons though. It gives them this perfect tactile clicky feel that you don't get with anything else.
These are great cases. Just ordered my second one (different color)
I've gone through all of the threads on screen protectors for the mix and I have observed that the majority aren't happy with the screen protectors they've got. I've ordered almost every type of tempered glass protector available for this device but I'm waiting for them to arrive.
For those who already have some screen protector installed on your mix, could you please upload photos of the device with the screen protector installed.
This is so that it can help other buyers to narrow down to the better screen protectors available. If you are satisfied with the screen protector you have bought, it would also help if you post a link to where you've bought it. I would have done this myself if I had received all the protectors I ordered. Unfortunately I haven't received anything yet.
Some reports suggest that Xiaomi may have used two different suppliers for the digitizer, one of them being prone to getting scratches easily. Even if this was not the case, I have seen many badly scratched Gorilla glass displays so I don't want to take the chance.
Hoping that people who already have some form of screen protection can help other buyers!
I have also bought all the decent cases available on ebay including the Love Mei Performance case and will post a review as soon as I receive them.
UPDATE: The Love Mei Powerful Case. This is the most rugged, shock-proof, snow-proof, dust-proof, splash-proof, everything under the sun-proof (except submersion in water) case available for the Mix.
As you can see from the photo comparison with another regular shock-proof case, this one is a beast. It lives up to its name. Came in a phone-box style premium box and certainly lives up to its price-tag. The case is made up of a hard aluminium shell with rubber layers for shock absorption. It also has a built-in tempered glass protector, meaning you wont need another screen protector.
The manufacturer also claims that the case offers drop-protection from up to 1.8m (5.9 feet).
I wouldn't recommend this case for daily use, mainly due to the sheer size of the case and not because it completely changes the look of the Mix. But for those of you who require extreme protection, if you have a baby at home who thinks the Mix is a Frisbee or if your dog likes playing "catch" and you only have your phone in hand, this is your answer. Buy this case!!
As you can see, I'm not using this case and may use this only if I'm going on a holiday or any outdoor activity which demands more protection for the phone. Hence, I don't regret buying it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
And now, my favourite case among all the cases I have for the Mix. The 360 Shock proof Rubber case. (This case is sold under many names, the most common being 360 Shockproof. Just follow product images. Anyway there isn't any branding printed on the actual case.)
This looks like something which came straight from the phone manufacturer. Slim and feels premium. Doesn't look or feel cheap and I believe the rubber material offers decent protection from bumps. I don't know whether it can withstand drops though.
The case doesn't feel cheap like the Red Plastic rubber shock proof case I've posted earlier (See 2nd post). It also has a smaller lip above the screen compared to the Plastic case but has raised corners. Maybe the plastic case offers more protection due to the better lip surrounding the screen and also because it is rubber+plastic combo, meaning there are two materials to absorb shock compared to just rubber with this one. But the reason why this is my favourite case is because it offers a balance between looks and protection.
Hope this post has helped you decide which case to get for the Mix. All cases showcased here are available on ebay & Amazon.
Cheers!
I've received the full coverage screen protector and a case today and as promised I'm uploading photos here so that it may help you decide.
I haven't experienced any issues with touch functionality using this protector like some like some users have mentioned. But as the glass hovers over the screen due to the adhesive only around the frame, applying this screen protector makes it look as if the display has a lower contrast ratio. This is due to the gap between the actual display glass and the tempered glass protector. You lose the experience of a fully laminated display. This isn't very noticeable in a well lit room but noticeable whenever you view images or videos with dark scenes. The blacks look greyish.
Also this is a fingerprint magnet and the glass tends to attract some dust. I've tried re-applying the protector over three times and a speck of dust manages to get in under the glass every time. This isn't the first time I'm applying screen protectors and its definitely something to do with the coating on the glass which attracts dust, maybe due to static.
The case feels slightly cheap (maybe because it was cheap ) but looks like it can protect the phone well. The only gripe I have is that there is no cushioning on the back, like cases from Spigen. The rubber like material you see is more like a bumper attached to a plastic shell. The back of the phone touches the plastic shell as you see in the images. Comparable to those hard plastic cases you get. Don't know whether that helps in terms of protection but the case has a good lip around the screen as you can see.
For those wondering, I bought the red color because the other colors for this case looked too bland. The case is available in Gold, light blue, Grey and silver. I wish there was black but there isn't.
I have more cases coming in and will update this when I receive it. Till then I hope those willing to help can also upload photos of their cases and screen protectors.
Cheers!
Here's a couple pix of the PELOSI TPU/Sandstone finish case:
https://www.casefanatic.com/xiaomi/case-xiaomi-mi-mix-pelosi-quicksand-pattern-slim-matte-tpu-cover/
The cutouts for the mics/3.5mm jack/speaker grill/USB Port are precise & allow enough room for oversized headphone/USB plugs.
The volume rocker & power button are covered & are easy to identify by feel.
As for protection,it'll keep the backside free of scratches/etc,but,as for protection from drops/etc... YMMV,as this is a low profile case,adding minimal width & thickness to the overall dimensions.
It works for me,the main reason I even bother with a case for this phone is the slippery grip.
Found some new bumper case.
https://www.armorkingcase.com/blogs/news/imatch-slim-light-aluminum-metal-shockproof-bumper-case-with-kickstand-for-xiaomi-mi-mix
dancoHERO said:
Found some new bumper case.
https://www.armorkingcase.com/blogs/news/imatch-slim-light-aluminum-metal-shockproof-bumper-case-with-kickstand-for-xiaomi-mi-mix
Click to expand...
Click to collapse
Interesting bumper, but would this protect the device? I'd imagine it would just ripple the impact into the ceramic and it would probably still shatter, unless there's a good amount of padding on the inside of the frame.
I prefer the minimal amount of case / bumper on a phone. If it wasn't as slippery ide go naked, but the TPU gives you more hand confidence. Though that amorkingcase looks pretty sweet, if it was not as "sharp and shaped" looking
KOLIOSIS said:
Here's a couple pix of the PELOSI TPU/Sandstone finish case:
https://www.casefanatic.com/xiaomi/case-xiaomi-mi-mix-pelosi-quicksand-pattern-slim-matte-tpu-cover/
The cutouts for the mics/3.5mm jack/speaker grill/USB Port are precise & allow enough room for oversized headphone/USB plugs.
The volume rocker & power button are covered & are easy to identify by feel.
As for protection,it'll keep the backside free of scratches/etc,but,as for protection from drops/etc... YMMV,as this is a low profile case,adding minimal width & thickness to the overall dimensions.
It works for me,the main reason I even bother with a case for this phone is the slippery grip.
Click to expand...
Click to collapse
Where did you get this shipped to/ how long did it take? I ask because it's about half off on ebay , but will probably take a long time to get to me in the states.
LaNsLyDe said:
Where did you get this shipped to/ how long did it take? I ask because it's about half off on ebay , but will probably take a long time to get to me in the states.
Click to expand...
Click to collapse
e-Bay & yes,it took about two weeks to arrive in the U.S.
KOLIOSIS said:
e-Bay & yes,it took about two weeks to arrive in the U.S.
Click to expand...
Click to collapse
Thanks a lot just ordered
LaNsLyDe said:
Thanks a lot just ordered
Click to expand...
Click to collapse
I just looked up the shipping history on my Pelosi case:
November 25 to December 12,but, I'm guessing yours won't take as long to deliver,as mine was in transit during the peak holiday season....
Sent from my lithium using XDA Labs
KOLIOSIS said:
I just looked up the shipping history on my Pelosi case:
November 25 to December 12,but, I'm guessing yours won't take as long to deliver,as mine was in transit during the peak holiday season....
Click to expand...
Click to collapse
Thanks. Patiently waiting
What's the length/width of the love mei case? Its not shown on any site.
ChodTheWacko said:
What's the length/width of the love mei case? Its not shown on any site.
Click to expand...
Click to collapse
Its not mentioned on the box either. It adds approx. 10mm to all sides. Its a huge case as you can see from the pictures.
I went with the Pelosi and I LOVE it!
satishp said:
Its not mentioned on the box either. It adds approx. 10mm to all sides. Its a huge case as you can see from the pictures.
Click to expand...
Click to collapse
Thanks! That pretty much kills pocketability for me. Shame, but I'm not surprised.
ChodTheWacko said:
Thanks! That pretty much kills pocketability for me. Shame, but I'm not surprised.
Click to expand...
Click to collapse
It doesn't affect pocketability that much actually. It just feels like a big phone. The overall size would be similar or slightly wider than the Xperia Z Ultra. But it would still look weird with formal\office wear though if that matters.
The main issue is with daily use. You wouldn't be able to use the phone with one hand anymore.
This case is best for someone who needs serious drop\splash resistance.
There is a similar case which is smaller. Its the imatch case which looks cool in my opinion but the case is hard to find on ebay. You can get it on aliexpress or amazon though.
I liked the Gold and Black variant of this case but I doubt whether it would cause issues when using a wireless charger. Hence, I haven't bought this yet.
iMatch Metal Silicone Shockproof case
If offers a similar level of protection as the Love Mei case but it is smaller. It even has a metal kickstand.
I have to agree that the 360 Shock proof Rubber case listed by the OP is the best case so far. It feels nice and offers a decent drop protection without too much bulk. It looks like it was meant to come with the phone. The matte color looks stealthy. The protection covers all angle of the phone and even a 1 mm lip to protect screen. I have dropped it 3-4 feet onto hardwood floor and sustained no damage. The extra bumps at the corner really provides a nice cushion. I highly recommend it.
@satishp @McoupeMD
Where did you guys purchase the 360 Case?
KOLIOSIS said:
@[email protected]
Where did you guys purchase the 360 Case?
Click to expand...
Click to collapse
I bought it on ebay. They also sell it on amazon. Just takes awhile to arrive from china.
McoupeMD said:
I bought it on ebay. They also sell it on amazon. Just takes awhile to arrive from china.
Click to expand...
Click to collapse
Got it,THX!
https://www.amazon.com/dp/B01MRTEG42/ref=twister_B01N75ZUQ0?_encoding=UTF8&th=1
Hi, I usually don't use cases as I don't see a point of buying a beautiful phone for a lot of money just to cover it with an ugly case. However Xperia 1 is so slippery that unfortunately I will have to buy a case or it won't last long.
Could you guys share the cases you use, preferably with some photos. I don't think there is a lot of choice at the moment as the device is relatively new, nevertheless new models coming out daily and won't hurt if we have a thread to showcase our purchases.
Personally I always buy the thinnest case possible. My previous device was pixel 2 xl and this was a case I had:
Fone-Stuff[emoji2400] Google Pixel 2 XL Case, Ultra-Thin 0.3mm Stylish Fully Protective Case Cover, Thinnest Hard Back Cover, Super Slim Matte Finish Extra Camera Protection, White https://www.amazon.co.uk/dp/B0777QHGSV/ref=cm_sw_r_cp_apa_i_4YCiDbSQX2SDP
Very thin and I liked it very much. Unfortunately I can't find anything similar for the xperia 1, ordered this one:
Olixar - Clear Case Compatible with Sony Xperia 1 - Slim Gel - Ultra Thin Transparent Cover - 100% Crystal Clear - Flexible Slim Protection - Non Slip - Clear https://www.amazon.co.uk/dp/B07M7DNG16/ref=cm_sw_r_cp_apa_i_U0CiDbK7BXF7D
Unfortunately, despite claiming to be ultra thin it's actually a regular silicon case.
Looking forward to your recommendations.
Sent from my J8110 using Tapatalk
Interesting post, I will not put a case in it since I have a good grip on it thank to its really narrowness, and it feels far less slippery than my previous mate 10 pro. But I'm interested to see what you guys choosed.
Problem with transparent case is they stay transparent for like 3 months then turn yellowish.
The sony case is just overpriced at 57€ and heavy (+60g).
I just hope the paint on the edge will last long. The back with gorilla glass 6 should resist well. But I hope edge paint is epoxy or strong like this.
I found out a lot of case for Xperia 1 are labeled for Xperia XZ4. It adds other options when you search for it.
I bought this.
https://www.amazon.it/gp/product/B07RW7TM9Z/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 It consists of a gel case and a glass film. It took two weeks to arrive, then I only use it occasionally, I prefer bare contact in the end, I threw the front glass because there are halos in the thin part of the front curve, unacceptable.
I bought this one few days ago:
SLEO Case for Sony Xperia 1 Case - Rubberized Hard PC Back Case Cover for Sony Xperia 1 - Black https://www.amazon.co.uk/dp/B07KXJ2SQ8/ref=cm_sw_r_cp_apa_i_qp5kDbNYE7JT4
Very happy with it. Very minimal, how I like it. Only downside is that it's almost as slippery as the phone itself.
Sent from my J8110 using Tapatalk
z1c_wh said:
I bought this.
https://www.amazon.it/gp/product/B07RW7TM9Z/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 It consists of a gel case and a glass film. It took two weeks to arrive, then I only use it occasionally, I prefer bare contact in the end, I threw the front glass because there are halos in the thin part of the front curve, unacceptable.
Click to expand...
Click to collapse
Why not use the case included in the box?
snake218 said:
Why not use the case included in the box?
Click to expand...
Click to collapse
The case is not included in all units, only for the J9110 units.
Bought this one few weeks ago:
€ 0,89 21%OFF | For Sony Xperia 1 Case Sony 1 Case Soft Silicone Back Cover Phone Case For Sony Xperia 1 Xperia1 Sony1 J8110 J8170 J9110
https://s.click.aliexpress.com/e/xQTo6rI
Really slim and strong
Fits perfect
Just had this case delivered. Nillkin super frosted shield. Fantastic fit and finish. Feels great on the phone. Best case yet, far nicer feel than the TPU cases which in my opinion end up feeling greasy and dirty.
jms.flynn said:
Just had this case delivered. Nillkin super frosted shield. Fantastic fit and finish. Feels great on the phone. Best case yet, far nicer feel than the TPU cases which in my opinion end up feeling greasy and dirty.
Click to expand...
Click to collapse
Would you share some pics please. Was thinking about getting it too.
Sent from my J8110 using Tapatalk
jms.flynn said:
Just had this case delivered. Nillkin super frosted shield. Fantastic fit and finish. Feels great on the phone. Best case yet, far nicer feel than the TPU cases which in my opinion end up feeling greasy and dirty.
Click to expand...
Click to collapse
Don't generally buy cases anymore and haven't bought one for the Xperia 1 either however, I've used Nilkin cases in the past and they have always been of good quality and fit very well. That is the case I'd go for this time if i was going to get one.
Are there any good rugged cases out yet?
Fujimens said:
Are there any good rugged cases out yet?
Click to expand...
Click to collapse
Check these out: (from a Japanese case maker, the total price including shipping to my country is still cheaper than the cheapest UAG case)
Black: https://global.rakuten.com/en/store/compmoto-r/item/4549550129305/
Red: https://global.rakuten.com/en/store/compmoto-r/item/4549550129312/
If you want rugged but women-ish then check this out:
https://global.rakuten.com/en/store/filmyasan/item/lp-19sx1hvd/?l-id=rgm_search_en_rvp_widget
Picked up this slim case https://www.amazon.com/dp/B07T34TPYB/ref=twister_B07W1VLKTW?_encoding=UTF8&psc=1 in red
I don't like bulky cases. I got it because I wanted open access to the buttons so the half-press camera button will work just fine.
It is smooth and a bit slippery actually. No drop protection (what do you expect). Pretty good for the price. The other colors like gravel green will have more of a standstone finish though
The rasta banana case is great!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Another case I picked up on Amazon.
The Aeska clear TPU case
Pros:
- Grippy
- Cheap
- 3 colors (purple, black and clear)
- Easy to access the FP scanner (it's not deep)
Cons:
- You lose the camera shutter button feel. Hard to determine the half press
- Power button also a little more difficult to press now.
This basic hard clear PC case is my favorite.
https://www.ebay.com/itm/For-Sony-X...e=STRK:MEBIDX:IT&_trksid=p2060353.m2749.l2649
Pros:
- Clear
- Slim, so no bulk!
- Open, easy accessible sides for buttons
- Cheap
Cons:
- Picks up grease/oils from your fingers
- Not very protective
romeokk said:
Check these out: (from a Japanese case maker, the total price including shipping to my country is still cheaper than the cheapest UAG case)
Black: https://global.rakuten.com/en/store/compmoto-r/item/4549550129305/
Red: https://global.rakuten.com/en/store/compmoto-r/item/4549550129312/
If you want rugged but women-ish then check this out:
https://global.rakuten.com/en/store/filmyasan/item/lp-19sx1hvd/?l-id=rgm_search_en_rvp_widget
Click to expand...
Click to collapse
I have just purchased it (zeroshock black) from Amazon Japan directly with international shipping, looks promising.
Got this case for my recently acquired X1:
https://www.amazon.com/gp/product/B07MBMPQBN/
It's a little pricey for such a basic thin case, but I didn't want to use my phone without a case, and AliExpress would've taken a month to deliver.
Contrary to popular opinion, I actually like the exposed top/bottom of the phone, since the case doesn't wrap around the entire frame, it's not that bulky and I really like thin and minimal cases. No weird branding on the back like many other cases have.
I got it in 'Smooth Black', but I probably should've gotten 'Matte Black' which may have been less slippery than this.
Since it was a really nice case, I might get the blue or green one if I eventually get bored of this all black look.
i hate this case...caus it feels so weird in hand while the phone is not fully framed
i like to get this one from Black Rock i have for my S9 ultra sin
This is similar.
https://a.aliexpress.com/_sPW1tb
Sent from my Sony Xperia 1!