[Guide] Root twrp umi Plus - General Topics

******************Rooting Guide For umi plus***************
Guys This IS for you, just Follow Below Guide to Install twrp recovery And Root your umi Plus,
Instructions-
twrp Installation-
Download sp tools, twrp, supersu, vcom Driver from Below
install correct vcom Driver on PC
Run Sp Flash Tools, Load MT67XX Scatter from recovery Folder
Uncheck Everything and then Check Recovery only
under Recovery Section Load Downloaded twrp.img
then click on Download
as soon as connect your Switched of phone to your pc via usb and wait for success, after complete, follow Below Instructions To Root,
Rooting Instructions-
1) first, Download the SuperSu zip file from Below.
2) Now save the SuperSu zip file to your phone.
3) Boot your device into Recovery mode (TWRP) by pressing ‘Volume UP + Power‘ button.
4) In TWRP Recovery navigate to Install Zip and select ‘SuperSu.zip’ to Root Your Device
5) Swipe to install SuperSu and reboot your device.
Downloads-
mod edit - links removed
SP TOOLS, twrp, vcom Driver, and supersu[/URL]
Screen Shorts-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Banzai!!!
I'm getting my phone monday and the root is finally out thank you

enjoy, you can Search xposed installation Guide on Forums, and allow Some time to Developers to prepare Custom Rom for your Device,

is the umi plus easy to root is there any roms made for it

I can't find any decent rom

wait some time, if someone prepare

will this way to root the phone also work for Umi plus E?

custom Recovery Required,

so i got my Plus, was still on Marshmallow. It took two OTA updates, then I got around to using this. so i installed twrp, then did a full nandroid backup. after that flashed the stock Nougat update minus the recovery. all was fine, and i let it update and restore all my apps. then i went back to twrp and flashed the newest SuperSU zip from their site. now im rooted on nougat, & totally loving this phone. best $200 ive spent in a long time

Will this work on the umi plus e please could someone advise...
Also can the Twrp from umi plus work for the umi plus e

r.king35 said:
Will this work on the umi plus e please could someone advise...
Also can the Twrp from umi plus work for the umi plus e
Click to expand...
Click to collapse
It will flash, but will your device work after that, no.

no, wait for recovery or try this one,

r.king35 said:
Will this work on the umi plus e please could someone advise...
Also can the Twrp from umi plus work for the umi plus e
Click to expand...
Click to collapse
no this is not for umi plus e, wait for custom Recovery

r.king35 said:
Will this work on the umi plus e please could someone advise...
Also can the Twrp from umi plus work for the umi plus e
Click to expand...
Click to collapse
I would advice to use the official TWRP & root method that is already provided by UMi -> http://community.umidigi.com/thread-2962-1-1.html
It covers all their recent phones (including the PLUS and the PLUS E).
No need to reinvent the wheel

raupe said:
No need to reinvent the wheel
Click to expand...
Click to collapse
Hmm - I think I was wrong :-/
The wheel has to be reinvented because of an non working TWRP with (some) devices that have been upgraded to Android 7 Nougat.
Some users (including me) facing the problem that the recovery won't start properly even after successful flash of recovery partition with the most recent available version of TWRP (provided by UMi).
These users got the "no command" text presented.
An common but not helping tip in the UMi forum is to press VolUp + Power Button but it changes nothing.
Also downgrading to Android 6 and installing TWRP is mentioned often.
When downgrading to Android 6 some users are running in the next problem: an black screen
Some users are reporting an working TWRP even after upgrade to Android 7.
In conclusion i'd like to speculate:
There are at least 2 different hardware versions.
A new one that can't be run with the downloadable Android 6 provided by UMi and an old one that can be down- and upgraded.
This may also be the reason why TWRP is running for some users and for others it did'nt.
I would be pleased to read your feedback.
Did you run in similar trouble and do we have a mass problem?
Did you found any solution?

raupe said:
Hmm - I think I was wrong :-/
Some users (including me) facing the problem that the recovery won't start properly even after successful flash of recovery partition with the most recent available version of TWRP (provided by UMi).
These users got the "no command" text presented.
...........
I would be pleased to read your feedback.
Did you run in similar trouble and do we have a mass problem?
Did you found any solution?
Click to expand...
Click to collapse
Hey mate,
I have the same rare UMi PLUS. Here is how I fixed mine.
https://forum.xda-developers.com/ge...y-twrp-cwm-t3385733/post70644780#post70644780
There is a custom built TWRP, with no touch screen functionality. You need to use OTG mouse/keyboard or console commands to root. Took me ages to sort it out, but the SOLUTION is in the above link.
I would love if @jemmini could create a working touch screen TWRP for us! Hint hint, nudge nudge, poke poke! I have tried to create/toyed with porting TWRP myself but am not skilled enough with the kernel modification required to make the touchscreen work. If anyone can explain/teach us how to fix the kernel ourselves, I would be eternally grateful! :good: 'Teach a man to fish' and all that!

Hey @shadimar69!
Thanks for the hint & link.
I found it also earlier but had not posted an self-reply here
There is an incoming new OTA and SPFT (http://www.mediafire.com/file/hh1069alx7v8i6i/PLUS.V3.02_20170208_c239v55_kw_u3_no-DB.rar) maybe it's worth to wait for that because TWRP has should be modified again ...
I could'nt state feedback for that because my girlfriends UMI PLUS is broken and has been send back to amazon for refund :-/

raupe said:
Hey @shadimar69!
There is an incoming new OTA and SPFT (http://www.mediafire.com/file/hh1069alx7v8i6i/PLUS.V3.02_20170208_c239v55_kw_u3_no-DB.rar) maybe it's worth to wait for that because TWRP has should be modified again ...
Click to expand...
Click to collapse
Hi @raupe,
I have been running this 'update' for the last 12 days give or take. It seems good, only BIG bug I have is the touch sensitivity around the ROM is very low. You have to press the screen really hard to get a touch register, but in some apps like Chrome its fine. GPS works fine, bluetooth, etc all the other issues people seem to have are fixed. (for me anyways) Will be good when the next build is released.

Don't you wish Android rooting process was a lil bit easy rooting the LGV20 was a real pain somewhat unstable but it has its ups!

shadimar69 said:
I would love if @jemmini could create a working touch screen TWRP for us! Hint hint, nudge nudge, poke poke! I have tried to create/toyed with porting TWRP myself but am not skilled enough with the kernel modification required to make the touchscreen work. If anyone can explain/teach us how to fix the kernel ourselves, I would be eternally grateful! :good: 'Teach a man to fish' and all that!
Click to expand...
Click to collapse
Is there any progress for a new TWRP with working touchsreen for these rare UMI Plus?
I have the same problem like @raupe and since I'm new to UMI, I read a lot of pages in a lot of forums, but no one seem to have a properly working recovery for this kind of UMI Plus.
These days I updated to 20170412_c239v55_kw_u3 firmware and managed to boot successfully the "no-touch"-TWRP.
Now I ordered an OTG cable, but meanwhile I was wondering, if there isn't any new TWRP without this little problem?
Thanks,
ts7348

Related

BLU Life One *Official Thread* [Info] [Root] [Roms]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Welcome to the BLU Life One Wiki: Where you can find all sorts of information about this device.
BLU Products Development Team is brought to you by G+ & Facebook.
We are an open community/group, this community is dedicated to anyone who owns a device made by BLU.
We are here to help in any way we can, so do not hesitate to ask questions.
Below I will post various Information/root tools/mods/ect for the BLU Life One.
***IMPORTANT READ BELOW***
Before we begin, to relieve some confusion with the information inside of the the links below: The BLU LIFE ONE is a device very similar to another phone called the Micromax Canvas 4 or should I rather say that device is very similar to the Life One, anyways I wanted to let you guys know because on some of the links posted down below you will notice that some of the ROMS/Root tools are for the Canvas 4 but do not be afraid. THIS IS NORMAL :good:, the Micromax Canvas 4 is the exactly the same as the Blu Life One. They both run on a MediaTek MT6589 A7 quad-core processor clocked at 1.2GHz. So ALL of the custom ROMS out for that device should & will work on our device
Need more proof? Check this out: http://goo.gl/cFcFIL
ANYWAYS LETS BEGIN!
DRIVERS:
Link 1: http://goo.gl/4gtpiy
Link 2: http://d-h.st/U8e
ROMS
Screenshots & more info about the individual ROMS are inside of each link
MIUI V5: http://goo.gl/XmMNSW
SPEEDV2 http://goo.gl/LzOwIv
LEWA OS http://goo.gl/uz0Lac
Team_Minha_Xtreme_SmAsHeR http://goo.gl/Xqpnd7
RECOVERY
TWRP 2.5.0.0 touch recovery http://goo.gl/Yln17A
BACK UPS/STOCK ROM
http://goo.gl/ggafOf
Root/Un-Root
Method 1: http://goo.gl/kR6lXc
Method 2: http://goo.gl/EngIUf
Method 3: http://goo.gl/i71DHd
TECHNICAL STUFF (FILES)
Insecure boot.img for Blu Life One, L120, version 6.1
Here is a modified boot.img with ro.secure=0 and ro.debuggable=1 set in default prop, to allow rooted adb. only of benefit if you need to capture boot logs etc. Kernel is unmodified.
This is from BLO software version 6.1 from the 8/08/13 ota update. If you're running something else, use caution.
After backing up your original (see below), apply by entering bootloader, holding down both volume buttons during power on, then go to recovery and select fastboot.
Then on your computer:
fastboot flash boot bootimg.BLO-L120.v6.1.insecure.img
fastboot continue
It works for me once flashed, but the normal caveats apply eg your new paperweight. If for any reason it doesn't work or you need to restore your original, you should hopefully be able to apply your backup bootimg with the same method. I cannot get this or the original bootimg to boot 'live' from fastboot, without flashing.
First, make a backup of your original bootimg on your phone with dd if=/dev/block/mmcblk0 bs=512 skip=68608 count=12288 of=/sdcard/bootimg.orginal.img
and then
adb pull /sdcard/bootimg.orginal.img off your phone
Click to expand...
Click to collapse
Insecure boot.imghttps://docs.google.com/file/d/0B_Qzm6ig01GeRS1tOS1VdkZPd2c/edit?usp=sharing
Thanks to Matt G. For these files.
ProjectConfig.mk
/system/data/misc/ProjectConfig.mk contains what looks like the needed kernel config parameters for the phone's hardware.
posted a copy at
Click to expand...
Click to collapse
ProjectConfig.mk http://goo.gl/CXB8Vn
Thanks to Matt G. For these files.
UNBOXING
www.youtube.com/embed/NhA31qYuPPs
FULL SPECS: http://www.gsmarena.com/blu_life_one-5358.php
IF YOU GUYS FOUND THIS THREAD HELPFUL JUST PRESS THANKS AND MAKE SURE TO VISIT AND JOIN OUR TEAM OVER AT
GOOGLE PLUS: https://plus.google.com/communities/117846429749085694805
FACEBOOK: https://www.facebook.com/groups/404226186366728/
Hi, the link you provided for TWRP links to Micromax A110, Please let us know whether the same TWRP works for Canvas 4/BLue Life One
Will any of these root methods work on the Life One M? (L131)
vand3537 said:
Will any of these root methods work on the Life One M? (L131)
Click to expand...
Click to collapse
They should work
Is it correct that one can use Micromax Canvas 4 roms?
Hi there, based on my experience you can use the Micromax Canvas 4 ROM's. We aware of one thing: in my case I've lost some of the radio 3G frequencies by flashing a Micromax ROM and I had to go back to the stock ROM. This may or may not affect you depending on where you are, in my case I lost AT&T's 3G and had to go back. NeroD is working on a fix, so we could basically flash the radio (modem.img), on top of any Micromax ROM and get all the frequencies back. I'll report once it's done.
Modem/Radio if you use a Micromax ROM
Hi there,
If you use a Micromax Canvas 4 ROM on the BLU L120 (Life One), you'll loose some of the phone radio 3G bands and, of course, the 3G data speed in the US (at least with AT&T). The phone will only connect at EDGE speeds. This happens because a different radio, specific for the Micromax, get's flashed with the ROM. This has been my experience.
There's a solution: I've created a flashable .zip file that you can use in CWM right after you have flashed your favorite ROM.
I've tried it with the PureXperiaZ2 ROM and it works perfectly fine! Again, just flash the ROM and, then flash the attached .zip and you'll have the stock radio for the BLU on a Micromax ROM.
Enjoy!
add additional language BLU Life One L120
Hello guys i'm writing you here because i'm having a huge problem with my phone. My phone is BLU Life One L120 DUAL SIM and it's running Android 4.2.1, the Kernel version is 3.4.5 (brought from USA - Unlocked) and is having only 5,6 system languages... and all i need is my Bulgarian language, because i want to give it to my mother to use it..
I've tried bunch of ****s and i've read a lot of stuff but it didn't change my language... for example, i've used app named More Locale 2., i've watched some videos and made some tries with Android language project app & etc... but it didn't help
I've rooted my device, i've installed ROM manager but he's not recognizing my phone so i'm having also problem there, because i can't flash anything and i don't know what to do...
I was planning to reinstall the OS and try all of that all over again, but without the ClockworkMod recognition i'm helpless and i can't do almost anything.. I've also installed app "Flasher", which in the begining started to work only with the .zip files (cause i was having 1,2 prepared zips from Android language project programme) but still it didn't helped
So... I'm asking you, can you please give me some advice how to fix this problem and give my ****ing phone to my mother finally, because she's very annoying somethimes..
Can someone help me? I tried rooting my phone using each method but they all say failed. My drivers are correctly installed and i followed each instruction correctly. Is there something else I can do?
Sent from my BLU Life One using XDA Free mobile app
Here is big thread of clone of blu life one
http://www.hackleaks.in/2014/01/all-about-micromax-canvas-4-a210.html
---------- Post added at 07:49 AM ---------- Previous post was at 07:47 AM ----------
Just add your modem.img
Baseband version unknown
Hi,
I have a BLO L200 and I installed a custom ROM. Then the "Baseband version" has changed to "unknown" and I can't make calls. The SIM Card management doesn't work anymore.
So I flashed back a STOCK ROM and the problem remains.
(I have a backup of IMEI)
Can someone help me, please?
Hello,
I have a problem, my Wi-Fi connection is slower than before and i don't know the reason which made it like this.
(only takes signal from close distance)
I rooted the device before couple of months and my recovery is TWRP, i tried to do soft reset the phone, but it is not working either - actually it's doing it in the beginning, but when it restarts - nothing has changed, all the apps are there, everything's there
Then I moved forward to step two - hard reset, it's not giving me to enter the recovery mode (not TWRP, not CWM, nothing..) - it's showing the boot screen of BLU and again it runs normally without any change at all. I tried enter cwm/twrp from the phone, using the SyS Updater app, TWRP app, CWM app for factory reset and again, no change...
I removed the sim card & memory card, it's not that... i don't know what else could i do. It's dual sim phone, do you thing it has some meaning ?
Can you advice me somehow or have anyone having the same/similar problem ?
I need help
...
Good morning , I hope someone can help me , my life one blu L120 , was root, and titanium backup , a process turned out the gallery , and the phone did not work anymore , so now this on blu logo and does not start . what can i do?
Hi there falks.... help please
I recently bought my Blu life one L120 (micromax canvas 4 a210/wico stairway clone) Gotta say is a very good piece of equipment!!....
I sucessfully rooted it with King Root... but, i couldn't flash any rom, neither cwm nor Sp Tools....
I've tried many rom's
.-Lewacanvas
.-ReBirth official
.-ReBirth custom
.-Dark Xperia Z3
.-Xperia Z2 lite
.-Miui V5
.- And the micromax canvas 4 A210 Stock Rom
Nothing...
Please can anybody guide me on the right path in order to accomplish flashing theRom..
You're quite a flasher there mate!
luke_cage said:
I recently bought my Blu life one L120 (micromax canvas 4 a210/wico stairway clone) Gotta say is a very good piece of equipment!!....
I sucessfully rooted it with King Root... but, i couldn't flash any rom, neither cwm nor Sp Tools....
I've tried many rom's
.-Lewacanvas
.-ReBirth official
.-ReBirth custom
.-Dark Xperia Z3
.-Xperia Z2 lite
.-Miui V5
.- And the micromax canvas 4 A210 Stock Rom
Nothing...
Please can anybody guide me on the right path in order to accomplish flashing theRom..
Click to expand...
Click to collapse
Bro, it sure sounds like you: (a) do not have BUSYBOX installed on the phone, and/or (b) you forgot to turn USB DEBUGGING back on!
Don't forget to hit THANKS if I helped. Happens to the best of us. Duh! LOL.
Hi,
I know I'm late to the party but I just picked up a BLU Life One cheap. So far I like the phone but the one thing driving me crazy is that after about 10 seconds the screen dims - whether auto-brightness is checked or not. I've found that it corresponds to the capacitive buttons (back, menu, home) turning off. It's surprising that there is no setting to keep the lights on or off.
I have rooted and installed Xposed Framework but have yet to find the module that can control this. Any suggestions?
Thanks,
Edit:
So I've discovered that the screen dimming issue is a BLU thing. After flashing a couple of the Micromax A210 roms, the screen dimming issue goes away. Unfortunately, my data speeds drop down to edge, as pointed out by cabegol. I tried flashing his modem fix, but to no avail. I will try again next weekend when I have more time to play with the phone.
Been looking for information on the new Blu Life One 4g LTE (Blu really needs to deal with their screwed-up phone naming scheme) with no joy. Suggestions?
looking at this phone for my kid
My daughter ended up with my gen one galaxy nexus.
now that i am equiping the kids with phones, I expected her to want an iphone. Nope, she likes her android.
So it looks like i need to pick a phone. This one looks pretty good.
Is everyone happy with it?
22350 said:
My daughter ended up with my gen one galaxy nexus.
now that i am equiping the kids with phones, I expected her to want an iphone. Nope, she likes her android.
So it looks like i need to pick a phone. This one looks pretty good.
Is everyone happy with it?
Click to expand...
Click to collapse
I recently got the new Blu Life One. Is my first Android phone, and i choose it because it was really cheap on Amazon. I'm happy with it right now, but, if you want more info about it, you should look for a review or wait until it became more popular in this forum.
Hope this would help.
Hello everyone, i have a problem with soft & hard reset of my phone.
If my thread is not on the right place, move it then, i apologize.
I am going to give you as much as information i have. My phone is BLU Life One L120 which is having a duplicate Micromax Canvas 4 A210 which is having the same chipset as i read into my thread for my BLU. Basically what i want to do now is just to soft or hard reset my phone... it sound easy i know but i wouldn't be asking if i haven't got an issue.
First of all i am using stock version 4.2.1 and kernal 3.4.5
I believe that i am having my drivers which i found in my official BLU Life One thread - http://d-h.st/U8e , also i tried with All MTK USB drivers 2014 http://androidurdu.net/mediatek-adb-...t65xx-support/
However i am able to transfer files between my pc & phone but when i try to root the device (i tried with Kingo root/ One click root/ Framaroot) it isn't recognizing my device or is unplugged, which is not true. I remember that once ago i installed TWRP recovery but i can't access from there no longer and i don't know the reason of that, otherwise i would reset it from there. Eventually recently i uninstalled superSU app and now i don't have root access anymore, which grow as a problem also. I checked it with RootChecker app. Also when i was doing both the soft and hard reset i removed the both SIMs & SD card just to be sure that i am doing it right.
When i use the soft reset it's giving me the option to run it but when it restarts it's all the same, nothing changes. It's the same with hard reset when i try to enter into Recovery mode.
Q: Why do i want to soft & hard reset it ?
A1: The first reason is that not a long ago my wi-fi signal got weaker despite that i'm next to my router and it was not like that when i bought it firstly and i want to use it instead of paying for it. I read a lot of stuff, but i can't find anything exactly the same.. which is why that i believe that if i reset it, it may went back normally.
A2: The second reason is that i just want to change my factory rom with a custom one, because the phone is having a great performance
Latest information is that i rooted again the phone with Framaroot, i've checked it just to be sure, i've installed the TWRP img file.... and still - no change with the same steps i made before, i'm starting to think that its maybe a hardware issue ?
I do need your help and i'd be very satisfied if i get it :highfive:

[Recovery]TWRP_2.8.x.x_LG_V400/410/V480

TWRP Recovery for The LG-GPad 7 - V400 and V410 New V480​​
Requirements:
You need a rooted GPad 7 V400/V410/V480.
Choose the right version for your device. and flash via an apk like flashify or rashr .
Downloads:
TWRP 2.8.5.0 V400
TWRP 2.8.5.0 V410
TWRP 2.8.6.0 V480
​
Credits:
dee_stroy and the whole TEAMWIN Team for The Recovery and Top Support !!!
MicroMod777 For testing (v480) and donating !!!!​
Have fun !!!
Shoxx​
XDA:DevDB Information
TWRP_2.8.x.x_LG_V400/410/V480, Tool/Utility for the LG G Pad 7 and 8
Contributors
shoxxy
Version Information
Status: Stable
Current Stable Version: 2.8.5.0
Stable Release Date: 2015-03-08
Created 2015-03-08
Last Updated 2015-05-06
Thanks for you work
THEME FOR TWRP TO V400
https://basketbuild.com/devs/z31s1g/800/TWRP 285X_v1
Thanks to @z31s1g
Now can we get our own section??!! We have root and recovery skinny rom by @timmytim and possibly cm12 on the way. There seem to be a lot more folks getting these devices now too. Also in the 10.1 development section there are more threads for us than them.. Js
Swizzle82 said:
Now can we get our own section??!! We have root and recovery skinny rom by @timmytim and possibly cm12 on the way. There seem to be a lot more folks getting these devices now too. Also in the 10.1 development section there are more threads for us than them.. Js
Click to expand...
Click to collapse
What did you use to root??
I have a us cellular v410 that i cannot root. I have tried one click, kingo, and one other. They all say that root is not available on mybdevice yet.
iowabassplayer said:
What did you use to root??
I have a us cellular v410 that i cannot root. I have tried one click, kingo, and one other. They all say that root is not available on mybdevice yet.
Click to expand...
Click to collapse
Purple Drake Lite from the G3 forum..
I tried Purple Drake as well.
Right after the tablet boots up after the temproot process, the command line says device found and then Error in red with a bunch of other stuff. It flashes too fast to read, cloees the cmd window and reboots my tablet.
iowabassplayer said:
I tried Purple Drake as well.
Right after the tablet boots up after the temproot process, the command line says device found and then Error in red with a bunch of other stuff. It flashes too fast to read, cloees the cmd window and reboots my tablet.
Click to expand...
Click to collapse
You have to go through all the pc connections to install all the drivers... Mtp,ptp,charge. Once you get those installed make sure it is on ptp then eun purp drake lite..
Thanks for your work Shoxxy! Question for you though... after installing and creating a backup, I rebooted and tried clicking Restore just to make sure it worked and no backups are listed there. I can navigate to the backups using the TWRP file manager, but not through Restore.
@swizzel
I tried that as well. No joy. Thanks anyway. I will keep looking through the forums to see what I am missing.
timmytim said:
There is a new root method for LG devices. Read up on it and see if it works
http://forum.xda-developers.com/android/development/guide-root-method-lg-devices-t3049772
Click to expand...
Click to collapse
Try this @iowabassplayer
For purp drake did you try installing the official drivers for the Gpad from lg's website?
911jason said:
Thanks for your work Shoxxy! Question for you though... after installing and creating a backup, I rebooted and tried clicking Restore just to make sure it worked and no backups are listed there. I can navigate to the backups using the TWRP file manager, but not through Restore.
Click to expand...
Click to collapse
I noticed that too, but after noticing it, I tapped the space just below Select Backup, when using the Materialized Theme shown below, and it then showed my backup.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I'm not sure if it's possible to do something similar to display the backup when using the default theme or not.
You were right. The theme is hiding the button apparently. I had clicked all over the place (I thought) and not found it, but just tried it again and it came up. I'm going to remove the theme and check again. Thanks for your help!
EDIT: Removing the TWRP theme solved the problem.
@Swizzle
I tried the drivers from the LG site and also the non-verizon driver from the purple drake thread.
I will try the other option you suggested.
Thank you all for the assistance!
So I gather the process for the 410LTE version to root is Purple Drake Lite first then TWRP? Or is TWRP optional? oh and sorry about the newbie question but what is the function of TWRP? Thanks in advance.
I got 2 from the recent ebay deals and want to root. Possibly want to get one of the T-Mobile plans (Harbor Mobile, basic-internet.com).
TWRP is kind of optional until we get some custom ROMs, which are in the works.
However, LG has never released the firmware for the V410, so installing TWRP and storing a nandroid backup isn't a bad idea.
jason2678 said:
TWRP is kind of optional until we get some custom ROMs, which are in the works.
However, LG has never released the firmware for the V410, so installing TWRP and storing a nandroid backup isn't a bad idea.
Click to expand...
Click to collapse
its AT&T not releasing the stock software that is the problem. i believe there is a kdz for the v400 but AT&T keeps their stuff hush hush like someone is going to try and steal their awesome bloat formula.
SuperMidgetProductions said:
its AT&T not releasing the stock software that is the problem. i believe there is a kdz for the v400 but AT&T keeps their stuff hush hush like someone is going to try and steal their awesome bloat formula.
Click to expand...
Click to collapse
I always figured it was an AT&T thing, not a manufacturer thing. I have an AT&T phone that hasn't had the firmware released since android 4.1.1. Every revision of the firmware right up to the current ones is available for the Canadian version of the same phone.
Luckily there are some great developers on XDA that support that phone quite nicely. It is great to start to see some more dev activity on this little tablet too. Thanks for all your hard work shoxxy (I hit the the button too)!
Used purple drake lite last night to root and then flashily to flash this. Created a backup, wiped and flashed skinny rom, no issues.
Econ212 said:
Used purple drake lite last night to root and then flashily to flash this. Created a backup, wiped and flashed skinny rom, no issues.
Click to expand...
Click to collapse
I will test V400
need unlock the bootloader for LG G Pad 7.0 V400

[RECOVERY][TWRP]Samsung Tab E - sm-t560/sm-t561/sm-t560nu/sm-t377p - Update 13/4/2016

Unofficial release -TWRP recovery for the TAB E, both Qualcom and Spreadtrum models
Update: TWRP now version 3.0.2-1
https://twrp.me/site/update/2016/02/05/twrp-3.0.0-0-released.html
https://twrp.me/site/update/2016/04/05/twrp-3.0.2-0-released.html
You flash this at your own risk. Please ensure you have the stock ROM to hand downloaded from SAMMOBILE in case of problems. This will trip the knox counter.
Instructions:
Put your device in DOWNLOAD mode.
Flash with ODIN 3.10.7 in the AP slot.
Uncheck Auto reboot.
Load the respective file below into the AP slot and hit start.
After flashing immediately reboot to recovery by holding POWER + HOME + VOL DOWN.
As soon as the screen goes blank change to VOL UP whilst still holding the other buttons.
You should now see TWRP recovery.
Qualcomm models SM-T377P/SM-T377R4 / SM-T560NU:
twrp_2.8.7.0_sm-t377p/sm-377r4
twrp_2.8.7.0_sm-t560nu
twrp_3.0.2-1_sm-t560nu
Spreadtrum models SM-T560 / SM-T561(Y/M):
twrp_2.8.7.0_sm-t560
twrp_2.8.7.0_sm-t561
twrp_3.0.2-1_sm-t560
To Root:
Flash the latest Supersu version below with TWRP:
DO NOT LET TWRP ROOT YOUR DEVICE IF IT ASKS. USE ONLY THE FILE BELOW:
https://forum.xda-developers.com/apps/supersu/2014-09-02-supersu-v2-05-t2868133
NOTE: ON SOME ANDROID 5.1.1 DEVICES IT IS NECESSARY TO GO TO:
Settings -> Developer Options -> OEM unlocking
AND ENABLE OEM UNLOCK FIRST OR YOU MAY ENCOUNTER 'BLOCKED BY FRP LOCK' WHEN FLASHING.
STOCK TWRP IMAGE FOR SM-T377P
This is a link to the stock system, boot, modem image for the T377P in case anyone needs it. Needs to be restored with twrp.
Thanks to @shawn1976 for providing this.
https://www.dropbox.com/s/skuwsbzm2zigd83/sm-T377PVPU1AOJ5-boot-system-modem-only.zip?dl=0
Credits: Teamwin and my testers - Phrozen99 and nates730 wizzhard and Siarl
Please note I don't own this device and spend a lot of my free time bringing these builds for you to use and benefit from.
FEEDBACK IS APPRECIATED.
THANKS.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
NOTE ON ROOTING WITH TWRP:
If you have kingroot installed remove this before rooting with SuperSU above or you will have issues.
Kingroot attempts to block Supersu so must be removed first by using the uninstaller in the Kingroot superuser app.
Absolutely NO feedback
Out of literally hundreds of people that have downloaded and benefitted from the files I've posted NOT ONE person has left ANY feedback whatsoever and only 5 have hit the thanks button and 2 very generous people have offered donations to whom I am very thankful.
As developers we need encouragement and ALL we ask is a quick click on the thanks button and a little feedback.
It's not too much to ask is it for hours of work on a device we don't even own?
XDA is a 2 way community, it's GIVE and TAKE not just TAKE.
Due to this I have decided I am not going to update the builds to the new TWRP v3.0.0-0.
Thank you.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
ashyx said:
Out of literally hundreds of people that have downloaded and benefitted from the files I've posted NOT ONE person has left ANY feedback whatsoever and only 5 have hit the thanks button and 2 very generous people have offered donations to whom I am very thankful.
As developers we need encouragement and ALL we ask is a quick click on the thanks button and a little feedback.
It's not too much to ask is it for hours of work on a device we don't even own?
XDA is a 2 way community, it's GIVE and TAKE not just TAKE.
Due to this I have decided I am not going to update the builds to the new TWRP v3.0.0-0.
Thank you.
DONATE ME HERE IF YOU WANT TO BUY ME A BEER OR HIT THE THANKS BUTTON IF I HELPED YOU
.
Click to expand...
Click to collapse
Come on people. It is not asking to much to thank someone for giving us what we need to make our tablets much better. Over in the T-Mobile S6 thread we have the same issues. These devs do this for us in their spare time for free, so showing a little appreciation is not asking a lot.
Hi, sorry for the late reaction. I succesfully installed your custom recovery but than i had trouble with SD card, it wouldn't get locked in the slot so i couldn't try the backup and restore funtions.
Now SD problem is fixed but when i boot into recovery i get stock, TWRP is gone so first chance i get i'll try to flash it again (don't have a PC available right now).
It would be a shame if you would stop working on our device, you gave us a very important tool for witch i would like to thank you.
You don't need a pc. Extract the recovery.img from the .tar file and then flash with flashify.
ashyx said:
You don't need a pc. Extract the recovery.img from the .tar file and then flash with flashify.
Click to expand...
Click to collapse
I've not rooted yet and i'd like to have a backup before i do, so i guess i'll just wait a bit and flash with Odin.
I want to thank @ashyx for getting Root &TWRP for the Tab E. I bought my SM-T560NU one week ago today. The first thing I did when I got home was to search for Root & Recovery and I found this thread. Everything flashed fine for me. Without devs like @ashyx on XDA we would be stuck with ordinary Tablets & Phones. So make sure to hit the thanks button and post feedback to let them know if things are working or not. It's not that hard to do.
bigtom624 said:
I want to thank @ashyx for getting Root &TWRP for the Tab E. I bought my SM-T560NU one week ago today. The first thing I did when I got home was to search for Root & Recovery and I found this thread. Everything flashed fine for me. Without devs like @ashyx on XDA we would be stuck with ordinary Tablets & Phones. So make sure to hit the thanks button and post feedback to let them know if things are working or not. It's not that hard to do.
Click to expand...
Click to collapse
+1, I haven't tried it yet on my wife's SM-T560NU 'coz my wife always have the tablet with her. She wouldn't even let me get close to it since I screwed up her phone. I will report ASAP when I get a chance to steal the tablet and root it (hopefully successful).
Thanks to @ashyx in advance and to guys reporting back on their experience. Please keep the thread alive.
Thanks for the feedback guys.
Botsok said:
+1, I haven't tried it yet on my wife's SM-T560NU 'coz my wife always have the tablet with her. She wouldn't even let me get close to it since I screwed up her phone. I will report ASAP when I get a chance to steal the tablet and root it (hopefully successful).
Thanks to @ashyx in advance and to guys reporting back on their experience. Please keep the thread alive.
Click to expand...
Click to collapse
If you follow the steps in the OP you should not have any problems. Good luck.
It s work! Thanks man !
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Smt560nu rom
Was anyone able to find the stock ROM for SM-T560NU on SAMMOBILE?
** EDIT ** I've tried two different computers, reinstalling samsung drivers and different ports. Can't seem to get past the setup connection step in ODIN. Does anyone have any suggestions?
** EDIT 2** Got it working! Thanks ashyx!
Mount Problem
When i tried to install a rom, it says 'Could not mount...blabla'. So I did go to the mount-tab and checked it for the second time and it still fails. Help me please
Hello! I have just finished reading through this thread and wanted to say thank you for all your hard work and dedication ashyx and the testers! I am about to purchase this tablet and wanted to know if model number SM-T560NZKUXAR is compatible with the files you created?
**edit** I just purchased the tablet and it is a SM-T560NU when I get home from work I will test this out and leave feed back
ROM-mer said:
When i tried to install a rom, it says 'Could not mount...blabla'. So I did go to the mount-tab and checked it for the second time and it still fails. Help me please
Click to expand...
Click to collapse
Are you attempting to flash the stock rom with twrp? As far as Im aware there is no custom rom for this device?
I apologize for the stupid question here, but if I am just wanting to do root do i have to flash twrp_2.8.7.0_sm-t560nu.tar first? Or can I just flash the root file
blaineg85 said:
I apologize for the stupid question here, but if I am just wanting to do root do i have to flash twrp_2.8.7.0_sm-t560nu.tar first? Or can I just flash the root file
Click to expand...
Click to collapse
If you're talking about this http://forum.xda-developers.com/showthread.php?t=3300291
Then you don't need to install twrp.
However installing custom recovery and making a backup is one of the best mods you can do to your device.
blaineg85 said:
I apologize for the stupid question here, but if I am just wanting to do root do i have to flash twrp_2.8.7.0_sm-t560nu.tar first? Or can I just flash the root file
Click to expand...
Click to collapse
When I got my Sm-t560nu last week the first thing I did was flash the TWRP 2.8.7.0 tar in ODIN, then I flashed the chainfire su file in ODIN to root it and everything went fine for me. After that I made a backup just like @ashyx suggested.
Ok thank you so much for all your help!! I did the root part successfully which is what I wanted. I don't understand the purpose of doing the twrp

[Recovery] TWRP 3.0.2-0

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Credit: Captain_Throwback​
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom "ROM" like OmniROM
Downloads:
- twrp-3.0.2-0-a16
- md5: 552620e0834ab9be3e0a588258a4bc14
*Optional*
- ADB_Fastboot
- md5: fc78b03f23e562c919bfbaea0ef9bc79
Install Instructions:
- Unlock Your Bootloader (Instructions)
- Boot your device into Download Mode (adb reboot download)
- Flash TWRP via Fastboot (fastboot flash recovery <twrpfilenamegoeshere>)
*Optional*
- Boot into TWRP (adb reboot recovery)
- Go to advanced, then enable sideload
- Flash supersu (adb sideload <supersufilenamegoeshere>)
Original Root/S-OFF guide by jcase can be found HERE​
Will we get the latest twrp recovery?
wilbigdaddy2000 said:
Will we get the latest twrp recovery?
Click to expand...
Click to collapse
As soon as I get a chance buddy. I've been working some crazy long days(60hrs/WK) and dealing with family issues.
Just stick around and hopefully me or another SlimDesire Dev will get to it ASAP.
Wow only one person well 2 now hit the thanks button. Show your thanks people.
Thanks by the way dev
Appreciate the love Josh, but I've been in the Android game here on XDA since 2008 and know that not all things are appreciated. No worries, Captain_Throwback deserves all the thanks for this build anyways.
AndroidSamurai said:
Appreciate the love Josh, but I've been in the Android game here on XDA since 2008 and know that not all things are appreciated. No worries, Captain_Throwback deserves all the thanks for this build anyways.
Click to expand...
Click to collapse
You good bro I've been here since around 2008 myself. My first phone was HTC mytouch 4g lol and uneven the first Android phone the G1 and so forth. I know the G1 was the was the first Android phone but I didn't hear about rooting until HTC mytouch 4g. Been doing it ever since, I even ported few roms like MIUI. Maybe soon I will be porting to this device.
Hope this is not considered as spamming threads. I just think this message is relevant to this thread in particular since is TWRP-related.
In case some of you can not load the TWRP image from the first post in this thread in your devices after flashing it, i recommend you try this another image also by Captain_Throwback. It worked with no problem on a HTC Desire 530 from Claro Chile, and maybe it will work on other versions.
Captain_Throwback said:
Alright, rebuilt TWRP with dtb separated (though that really shouldn't make a difference). If this one doesn't boot, I'll try using the dtb from the 3.0.2 TWRP, and if that still doesn't work, I'll just revert to the kernel/dtb from the original 3.0.2 release. I was hoping to be able to use the source-built kernel to patch the touch driver and clean up/fix some things, but that may not be possible. Unless this works, in which case, yay!
Click to expand...
Click to collapse
Click on the arrow inside the quote title to see the full post, so you can also see the link to the image file.
Everytime I try to make a back up in TWRP the phone reboots as soon as the back up begins. Anyone else had this happen? I'm used to nexus phones and this one is complicated to me
OP Junior Member9 posts Thanks: 0
In my devices htc desire d530u do not have any RUU file or any other ROM.
device have problem that it show HTC logo and do not start after this logo,I do all process which is given to internet ,it do not working.................................
IF any one have solution of this problem PLZ help
-----------------------------------------------------Devices info---------------------------------------
htc download mode
****RELOCKED*********
HTC_a16ul PVT s-on
LK-1.0.0.0000
RADIO-01.01_U113251482_62.02.60930G
OpenDSP - UNKOWN
OS - 1.32.709.12 taiwan version
Oct 11 2016,21:00:37{796991}
First of all I would like to thank anyone and everyone who has made phone rooting guides, they definitely help out!
Now my question, does anyone have the stock RUU: RUU_A16_UL_M60_DESIRE_SENSE70GP_TMUS_MetroPCS_US_1.36.1550.5_Radio_01.01_U113251531_68.01.61229G_release_495720_signed_2.exe
I cannot find this file anywhere, even the download link on HTC's website is broken. Unfortunately TWRP wont work on my Desire 530 because I upgraded my ROM to 1.36.1550.14. So I need to downgrade from what I've heard in order to get TWRP working, then I can install an S-OFF kernel and install Super-SU. Make sense to anyone?
I unlocked my bootloader and flashed TWRP to my recovery. When I reboot my phone into recovery I see the TWRP screen, then the phone reboots. I've tried clearing my cache partition, and that hasn't helped. I managed to do this by following directions for clearing cache partition on T-Mobile website with stock recovery image BTW. I also tried flashing several different versions of TWRP, some experimental builds by Capt Throwback, and some builds for other phones. I just can't get any relief.
Thanks in advance!
Help!
Hello when I want to install the twrp in cmd it keeps saying device not found, while my phone is connected pls help! I am a noob when it comes to phone rooting and stuff!!!
Hey there. So I tried to flash this after updating to the 7.0 Nougat update but it fails to boot.
---------- Post added at 04:13 AM ---------- Previous post was at 04:12 AM ----------
Haruncosovic said:
Hello when I want to install the twrp in cmd it keeps saying device not found, while my phone is connected pls help! I am a noob when it comes to phone rooting and stuff!!!
Click to expand...
Click to collapse
Have you got it working. It's been almost a month so I'm sure you have.
can you please reshare the files? im not able to download.. Thank you very much

Nubia X: ROOT, TWRP and GAPPS

Attention: This is a post aimed for Developers only! Check the How-To instead!
Welcome to this progress Thread.
In this thread im going to collect links, thinks I have done at my own and other stuff related to making the Nubia X more useful outside china.
CHECKPOINTS:
ROOT ✓
UNLOCK BOOTLOADER ✓
FLASH Original Recovery ✓
GENERATE Tree
COMPILE TWRP for Nubia X NX616J
FLASH TWRP X
FLASH GApps X/✓ (partial working)
LINKS:
TWRP for a new device: forum.xda-developers.com/showthread.php?p=32965365#post32965365 (because nubia x is not officially supported yet, but im working on it).
ROOT Nubia X: bbs.nubia.cn/thread-1396991-1-1.html (The toolkit, as messed up as it looks, works just fine. Close the first window and click root while having an OEM unlocked phone).
ORIGINAL ROM (will upload it on mega because the chinese provider is absolut unusable) <- edit later :good:
What I've done so far is successfully rooting the phone (using the toolkit above), unlocking the bootloader (i guess) with
Code:
fastboot oem nubia_unlock NUBIA_NX616J
where NUBIA_NX616J is the pass.
After running this command you will get the following output:
Code:
(bootloader) START update nubia fastboot unlock flag!!!
(bootloader) set state to 1 ok!!!
OKAY [ 0.009s]
Finished. Total time: 0.010s
And after this, you can simply flash using
Code:
fastboot flash <partition> <filename>.img
.
Im currently checking the specs for the device so I can compile a TWRP for it.
Also, you can't flash Gapps right now because TWRP is unavailable as long as I / or someone else don't create a device tree for this phone.
But you can install all GApps apk's (most importantly the Google Service Framework (GSM) apk). After that, just convert the apps
to system apps using Link2SD App. (Search App -> Options -> Convert to System App (or: Include Update to System....).
Actually, I guess I finished the device tree.
Check this one out:
https://mega.nz/#!HiZQkApR!473uATQeZp224i_aka84bYszYlPnlsyo0dDaJp32NZo
If this is the right one, we could successfully compile TWRP for this device! :fingers-crossed:
Alright, I need to change stuff but here's what I have right now:
The phone is a bit tricky when it comes to partitions.
But I've managed to get all the required stuff ready to set up TWRP.
Maybe I'll try the compiled version on my own or I'll force br_other to test it out >!
Well check back here later, for updates.
LAST CHECKPOINT: 13.12.2018.
Please note:
If youdo that operation through the tool mentioned in the link above, be careful with the Magisk installed.
Do not upgrade it, because the phone will go into a bootloop (like me ).
Although you can recover it from that stage, it's pretty annoying, especially if you don't have data backup.
br_other said:
Please note:
If youdo that operation through the tool mentioned in the link above, be careful with the Magisk installed.
Do not upgrade it, because the phone will go into a bootloop (like me ).
Although you can recover it from that stage, it's pretty annoying, especially if you don't have data backup.
Click to expand...
Click to collapse
Yes, that's right don't do that.
Use Google Translate to translate the Chinese Tutorial (Important, I can't re-upload it because it's not mine!).
And create a backup before doing anything.
It's not that likely to happen that your phone is brick after doing these steps but it might be possible.
Be careful bois.
Another thing to mention:
Don't run any ADB commands mentioned above!
This is not a Tutorial - this is a progress thread for other Developer (and for people interested in rooting their nubia).
Maybe for someone interested:
Its working:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
:good:
Great Job mate! I sold nubia x but I stay in touch...
Teeemoo said:
Maybe for someone interested:
Its working:
:good:
Click to expand...
Click to collapse
Thats awesome! I'm searching everywhere for a rundown on how to do this. I am a novice when it comes to phones but would love to get my nubia x working with google play store. I know this is for developers but is their any guide around to show how this can be done?
Phonenoob0001 said:
Thats awesome! I'm searching everywhere for a rundown on how to do this. I am a novice when it comes to phones but would love to get my nubia x working with google play store. I know this is for developers but is their any guide around to show how this can be done?
Click to expand...
Click to collapse
Imma do a tutorial tomorrow, be patient !
Teeemoo said:
Imma do a tutorial tomorrow, be patient !
Click to expand...
Click to collapse
If you want I can help you here.
Attached how looks mine.
you guys are amazing please make a tutorial to install the play store correctly. thank you
Teeemoo said:
Imma do a tutorial tomorrow, be patient !
Click to expand...
Click to collapse
This will be so amazing! Dont know how to thank you enough your a hero.
hi all, I'm new here, I'm thinking of buying this Nubia X, but I'm worried that Google Play won't work. Do the main apps, such as Maps, Gmail or Google Play and google play game updates work?
Download Tool
Hi guys,
is there any Possibility to Download the Root tool, without any failures or additional stuff?
I dont speak any chinese and the given Mirrors are both unusable.
The one from Micro Cloud jus doesnt open and the other one from Baidu Cloud asks me to download the Baidu software, no matter what i click.
Does anyone know how or where to download the tool except from using the Baidu Manager?
Hey guys,
Sorry - I was too tired to do the tutorial yesterday.
But imma do it now !
The phone works perfectly (in the view of a developer) with the Google Apps.
Im looking forward to get TWRP working with that phone when I have more free-time.
Until then, sure, the phone is perfectly usable.
Check back in a few hours, I will create a new thread or update this one.
Cheers :victory:
Hey Teeemoo
I got my Nubia X today and waiting you because i felt how important is google services once i used the nubia X.
Cheers
Teeemoo said:
Hey guys,
Sorry - I was too tired to do the tutorial yesterday.
But imma do it now !
The phone works perfectly (in the view of a developer) with the Google Apps.
Im looking forward to get TWRP working with that phone when I have more free-time.
Until then, sure, the phone is perfectly usable.
Check back in a few hours, I will create a new thread or update this one.
Cheers :victory:
Click to expand...
Click to collapse
You are AMAZING!!!!
Thank you, and also, if it's not too much trouble, could you mirror the files somewhere else besides Baidu?
Thanks again
frankstoy said:
You are AMAZING!!!!
Thank you, and also, if it's not too much trouble, could you mirror the files somewhere else besides Baidu?
Thanks again
Click to expand...
Click to collapse
https://forum.xda-developers.com/nubia-x/how-to/how-to-gapps-nubia-x-t3878441
There we go buddies,
enjoy !
And keep in mind, don't update the phone yet - there is no guarantee that this tut will work with the new version.
root issues
Hi
thank you to make a tutorial about rooting the phone i did everything you said in step 1 and 2 but iv'e had a issues with the reboot this is the picture of my phone right now do i need to reinstall the factory firmware ? thank you in advance
Hugo
Hi guys,
I need a very big help for my Nubia x.
Today I have updated my Nubia x via otg with new Rom V 2.20. Everything worked very well, but after I have made a big mistake trying to root it but I have completely bricked my phone.
No recovery anymore. It's only possible to connect via EDL with Nubia Emergency tool 1.1.6 but that version it's not yet available for Nubia x.
I ask if someone have some tool or files to get it back in life.
Thank you very much and Merry Christmas
warrio said:
Hi guys,
I need a very big help for my Nubia x.
Today I have updated my Nubia x via otg with new Rom V 2.20. Everything worked very well, but after I have made a big mistake trying to root it but I have completely bricked my phone.
No recovery anymore. It's only possible to connect via EDL with Nubia Emergency tool 1.1.6 but that version it's not yet available for Nubia x.
I ask if someone have some tool or files to get it back in life.
Thank you very much and Merry Christmas
Click to expand...
Click to collapse
Hi,
If you have access to fastboot and / or bootloader we can try to flash the original boot and recovery image.
Just send me a PM with details and I'll try to connect via TeamViewer in order to help you.
Cheers
warrio said:
HToday I have updated my Nubia x via otg with new Rom V 2.20. Everything worked very well, but after I have made a big mistake trying to root it but I have completely bricked my phone.
Click to expand...
Click to collapse
I'm curious. Can you please give some more details here?
You said you did update it via OTG? Does it means you did that trough the recovery mode?
Also was the phone rooted before that?
Also as my friend said - check if you can go in recovery and try the fastboot access as well.
Post some update of your progress as well.

Categories

Resources